Dynamic WEP Wireless Network (University) [SOLVED]
I for some reason am having the hardest time connecting to my universities wifi. It sees the network, and the signal strength is plenty, however whenever I try to connect to it...it tries and tries then just fails.
It's encrypted by Dynamic WEP with PEAP MSCHAPv2
We're supposed to put in our username and password for the university's system, but it just won't work.
I'm using NetworkManager, and it works great everywhere else...just for some reason it hates connecting to their network.
Any help would be appreciated, thank you!
Last edited by MeathooK (2010-08-19 04:19:30)
Solved my own problem...did quite a bit of reading last night and it seems like NetworkManager still has trouble connecting to these types of networks, and the only way to get it to work correctly is by using wpa_supplicant...which is what I did. Here's my wpa_supplicant.conf
network={
ssid="wtamu-student-wireless"
key_mgmt=IEEE8021X
eap=PEAP
phase2="auth=MSCHAPV2"
identity="username"
password="password"
Maybe this'll help somebody later on!
Similar Messages
-
Connecting the time capsule to a wireless network (university)
I just purchased my first mac computer, and the time capsule. I am a university student, and my housing has wireless network, so i would need to configure it to that network (which requires registration). When I first opened everything up, I could see the time capsule in the airport utility, but now I cannot. I dont really know where to go from here, because all of the manuals go from being able to detect the time capsule. On top of that how do I connect the wireless to the registration required network? Any help is much appreciated.
how can I use the time capsule as a "wifi acceptor" to connect with my wireless network, and then boardcasting wifi signal to my devices?
Unfortunately, this is not possible.
In order to broadcast a wireless network with Internet access, the Time Capsule must be provided with a wired Ethernet connection at its WAN "O" port.
Check wtih your Internet Service Provider to see if they have an adapter or other device that will provide a wired Ethernet connection to the Time Capsule. -
How do I refresh wireless network list?
I own a MacBook Pro and I noticed recently that when I switch on my access point AFTER booting OSX my home WEP wireless network won't show up in the network list and thus the airport does not connect. I have to switch airport off and then back on to find the network, and then all works fine.
Is there any way to tell airport to "refresh" the network list, or is any option defining how often to check for networks in range?
Maurizio
Macbook Pro Mac OS X (10.4.9)Thanks, I believe I found the solution following your suggestion.
Actually I did not want to choose the option you mentioned since I wanted Airport to try to connect to open network if it doesen't find a preferred one.
However I found out that my airport option "By default join:" was set to Automatic. I believed it mean Airport tries to connect to the last network used, and thus had to connect to my home network as I wanted but, as I explainde above, it did not refresh the network list. Can't figure out why.
Instead changing that to "Preferred networks" and using the option "Ask before joining an open network" did the trick. Now Airport finds any network in the preferred list almost instantly, and otherwise asks if I want to use an open one. -
[SOLVED]Broadcom BCM4313 does not detect all wireless networks
EDIT:
I'm really sorry to the Arch forum users and to the admins for posting such easy problems which i could have fixed myself.
To solve this what i did was to change the channel on the router and its 802.11 mode. I turned my main machine on and it was doing the same as the machine i posted here first so it was two machines and so probably not a problem of the pc but of the router.
I don't know if this means my network cards are just bad or something else but it works now.
Hello,
I'm having a problem with the computer on the title. When i try connect the computer over wifi(to my own network), it doesn't "see" my network. Sees all my neighbours networks but not mine. It was working till a couple of days ago.
lspci -k
05:00.0 Network controller: Broadcom Corporation BCM4313 802.11bgn Wireless Network Adapter (rev 01)
Subsystem: Wistron NeWeb Corp. Device 051a
Kernel driver in use: bcma-pci-bridge
Kernel modules: bcma
rfkill list
0: samsung-wlan: Wireless LAN
Soft blocked: no
Hard blocked: no
1: samsung-bluetooth: Bluetooth
Soft blocked: no
Hard blocked: no
2: hci0: Bluetooth
Soft blocked: no
Hard blocked: no
3: phy0: Wireless LAN
Soft blocked: no
Hard blocked: no
I tried changing the encryption on the router from WPA&WPA2 to WEP and to WPA and i from TKIP&AES to simply AES but to no avail.
I also tried loading different modules still related to b43(like the legacy one) and installing the firmware from AUR.
Has this happen to anyone else?
I'm still trying to do this on the live iso so i can try as much stuff as needed and then i can just reboot and then do just what i need:)
thank you
Last edited by jantonio2992 (2014-07-20 11:22:03)ewaller wrote:It sounds like your regulatory domain is not set correctly. Not all channels are legal to use in all countries. Perhaps your router had been using a channel legally, but your computer is unaware of its location, and was therefore ignoring the channel. Also, I assume you are in the right band. I don't know about your system, but thus ancient laptop does not work in the 5GHz band.
Thank you for shedding some light on the subject, but actually the channels the router permits are through 2.412 to 2.472 (more less, i think that writing here 13 frequencies wont help anyone ), and what i did was look on my working laptop, the channel for the networks around the house and select on my router a channel that wouldn't be the same, but i think the router has a built in tool to do this. -
[Solved]Unable to connect to wireless network using networkmanager
I have just recently reinstalled Arch Linux so I could try out Gnome 3. I am using Slim for a display manager and as I said before Gnome 3 for the window manager. All of the packages are the latest versions.
slim 1.3.4-2
gnome-session 3.4.2-3
consolekit 0.4.6-4
networkmanager 0.9.4.0-6
network-manager-applet 0.9.4.1-1
My current issue is that when i click on the network manager applet then click on a network to connect to it nothing happens. It doesn't matter if the network is secure or not. I have followed the instructions on the wiki for slim, gnome, and networkmanager. I have been reading the forums and trying out other people's solutions. So far nothing is working.
Sorry for the long post but I figured more information was better than not enough.
Thanks in advance.
Here are some of my config files.
/etc/rc.conf
# /etc/rc.conf - configuration file for initscripts
# Most of rc.conf has been replaced by various other configuration
# files. See archlinux(7) for details.
# For more details on rc.conf see rc.conf(5).
DAEMONS=(syslog-ng dbus networkmanager alsa hwclock sshd crond)
# Storage
# USEDMRAID="no"
# USELVM="no"
# Network
# interface=
# address=
# netmask=
# gateway=
/etc/slim.conf
# Path, X server and arguments (if needed)
# Note: -xauth $authfile is automatically appended
default_path /bin:/usr/bin:/usr/local/bin
default_xserver /usr/bin/X
xserver_arguments -nolisten tcp vt07
# Commands for halt, login, etc.
halt_cmd /sbin/shutdown -h now
reboot_cmd /sbin/shutdown -r now
console_cmd /usr/bin/xterm -C -fg white -bg black +sb -T "Console login" -e /bin/sh -c "/bin/cat /etc/issue; exec /bin/login"
#suspend_cmd /usr/sbin/suspend
# Full path to the xauth binary
xauth_path /usr/bin/xauth
# Xauth file for server
authfile /var/run/slim.auth
# Activate numlock when slim starts. Valid values: on|off
# numlock on
# Hide the mouse cursor (note: does not work with some WMs).
# Valid values: true|false
# hidecursor false
# This command is executed after a succesful login.
# you can place the %session and %theme variables
# to handle launching of specific commands in .xinitrc
# depending of chosen session and slim theme
# NOTE: if your system does not have bash you need
# to adjust the command according to your preferred shell,
# i.e. for freebsd use:
# login_cmd exec /bin/sh - ~/.xinitrc %session
#login_cmd exec /bin/bash -login ~/.xinitrc %session
login_cmd exec ck-launch-session dbus-launch /bin/bash -login ~/.xinitrc %session > ~/.xsession-errors 2>&1
# Commands executed when starting and exiting a session.
# They can be used for registering a X11 session with
# sessreg. You can use the %user variable
# sessionstart_cmd some command
# sessionstop_cmd some command
# Start in daemon mode. Valid values: yes | no
# Note that this can be overriden by the command line
# options "-d" and "-nodaemon"
# daemon yes
# Available sessions (first one is the default).
# The current chosen session name is replaced in the login_cmd
# above, so your login command can handle different sessions.
# see the xinitrc.sample file shipped with slim sources
sessions gnome-session
# Executed when pressing F11 (requires imagemagick)
screenshot_cmd import -window root /slim.png
# welcome message. Available variables: %host, %domain
welcome_msg Welcome to %host
# Session message. Prepended to the session name when pressing F1
# session_msg Session:
# shutdown / reboot messages
shutdown_msg The system is halting...
reboot_msg The system is rebooting...
# default user, leave blank or remove this line
# for avoid pre-loading the username.
#default_user simone
# Focus the password field on start when default_user is set
# Set to "yes" to enable this feature
#focus_password no
# Automatically login the default user (without entering
# the password. Set to "yes" to enable this feature
#auto_login no
# current theme, use comma separated list to specify a set to
# randomly choose from
#current_theme default
current_theme archlinux-simplyblack
# Lock file
lockfile /var/lock/slim.lock
# Log file
logfile /var/log/slim.log
/home/felix85/.xinitrc
#!/bin/sh
#/usr/bin/gnome-keyring-daemon --start --components=gpg
#/usr/bin/gnome-keyring-daemon --start --components=pkcs11
#/usr/bin/gnome-keyring-daemon --start --components=secrets
#/usr/bin/gnome-keyring-daemon --start --components=ssh
exec gnome-session
/etc/polkit-1/localauthority/50-local.d/org.freedesktop.NetworkManager.pkla
[nm-applet]
Identity=unix-group:network;unix-group:wheel
Action=org.freedesktop.NetworkManager.*
ResultAny=yes
ResultInactive=no
ResultActive=yes
/etc/pam.d/login
#%PAM-1.0
auth required pam_securetty.so
auth requisite pam_nologin.so
auth include system-local-login
account include system-local-login
session include system-local-login
session optional pam_ck_connector.so
/etc/pam.d/passwd
#%PAM-1.0
#password required pam_cracklib.so difok=2 minlen=8 dcredit=2 ocredit=2 retry=3
#password required pam_unix.so sha512 shadow use_authtok
password required pam_unix.so sha512 shadow nullok
password optional pam_gnome_keyring.so
/etc/pam.d/slim
#%PAM-1.0
auth requisite pam_nologin.so
auth required pam_env.so
auth required pam_unix.so
auth optional pam_gnome_keyring.so
account required pam_unix.so
password required pam_unix.so
session required pam_limits.so
session required pam_unix.so
session optional pam_loginuid.so
session optional pam_gnome_keyring.so auto_start
-session optional pam_systemd.so
/etc/group
root:x:0:root
bin:x:1:root,bin,daemon
daemon:x:2:root,bin,daemon
sys:x:3:root,bin
adm:x:4:root,daemon
tty:x:5:
disk:x:6:root
lp:x:7:daemon
mem:x:8:
kmem:x:9:
wheel:x:10:root,felix85
ftp:x:11:
mail:x:12:
uucp:x:14:
log:x:19:root
utmp:x:20:
locate:x:21:
rfkill:x:24:
smmsp:x:25:
http:x:33:
games:x:50:felix85
lock:x:54:
network:x:90:felix85
video:x:91:felix85
audio:x:92:felix85
optical:x:93:felix85
floppy:x:94:
storage:x:95:felix85
scanner:x:96:
power:x:98:felix85
nobody:x:99:
users:x:100:felix85
dbus:x:81:felix85
felix85:x:1000:
avahi:x:84:
usbmux:x:140:
rtkit:x:133:
ntp:x:87:
networkmanager:x:1001:felix85
Here are some of the log files.
/home/felix85/.xsession-errors
GNOME_KEYRING_CONTROL=/home/felix85/.cache/keyring-YtWJUI
GPG_AGENT_INFO=/home/felix85/.cache/keyring-YtWJUI/gpg:0:1
GNOME_KEYRING_CONTROL=/home/felix85/.cache/keyring-YtWJUI
GPG_AGENT_INFO=/home/felix85/.cache/keyring-YtWJUI/gpg:0:1
GNOME_KEYRING_CONTROL=/home/felix85/.cache/keyring-YtWJUI
GPG_AGENT_INFO=/home/felix85/.cache/keyring-YtWJUI/gpg:0:1
GNOME_KEYRING_CONTROL=/home/felix85/.cache/keyring-YtWJUI
GPG_AGENT_INFO=/home/felix85/.cache/keyring-YtWJUI/gpg:0:1
SSH_AUTH_SOCK=/home/felix85/.cache/keyring-YtWJUI/ssh
(gnome-settings-daemon:993): color-plugin-WARNING **: failed to create device: GDBus.Error:org.freedesktop.ColorManager.Failed: failed to obtain org.freedesktop.color-manager.create-device auth
Failed to play sound: File or data not found
** Message: applet now removed from the notification area
** Message: applet now embedded in the notification area
Window manager warning: CurrentTime used to choose focus window; focus window may not be correct.
Window manager warning: Got a request to focus the no_focus_window with a timestamp of 0. This shouldn't happen!
(gnome-shell:1019): folks-WARNING **: Failed to find primary PersonaStore with type ID 'eds' and ID 'system'.
Individuals will not be linked properly and creating new links between Personas will not work.
The configured primary PersonaStore's backend may not be installed. If you are unsure, check with your distribution.
Window manager warning: Log level 16: Device activation failed: (32) Not authorized to control networking.
Window manager warning: CurrentTime used to choose focus window; focus window may not be correct.
Window manager warning: Got a request to focus the no_focus_window with a timestamp of 0. This shouldn't happen!
Window manager warning: Log level 16: Could not create object for /org/freedesktop/NetworkManager/IP6Config/6: Method "GetAll" with signature "s" on interface "org.freedesktop.DBus.Properties" doesn't exist
/var/log/auth.log
Jul 27 20:10:33 f3lix85-arch login: pam_unix(login:session): session opened for user root by LOGIN(uid=0)
Jul 27 20:10:33 f3lix85-arch login: ROOT LOGIN ON tty1
Jul 27 20:17:17 f3lix85-arch login: pam_unix(login:session): session closed for user root
Jul 27 20:23:28 f3lix85-arch login: pam_unix(login:session): session opened for user root by LOGIN(uid=0)
Jul 27 20:23:28 f3lix85-arch login: ROOT LOGIN ON tty1
Jul 27 20:25:06 f3lix85-arch sshd[641]: Server listening on 0.0.0.0 port 22.
Jul 27 20:25:06 f3lix85-arch sshd[641]: Server listening on :: port 22.
Jul 27 20:25:30 f3lix85-arch sshd[642]: Accepted password for root from 192.168.0.2 port 60233 ssh2
Jul 27 20:25:30 f3lix85-arch sshd[642]: pam_unix_session(sshd:session): session opened for user root by (uid=0)
Jul 27 20:29:22 f3lix85-arch login: pam_unix(login:session): session closed for user root
Jul 27 20:29:24 f3lix85-arch sshd[641]: Received signal 15; terminating.
Jul 27 20:29:24 f3lix85-arch sshd[642]: Exiting on signal 15
Jul 27 20:29:24 f3lix85-arch sshd[642]: pam_unix_session(sshd:session): session closed for user root
Jul 27 20:30:14 f3lix85-arch login: pam_tally(login:auth): pam_get_uid; no such user
Jul 27 20:30:16 f3lix85-arch login: pam_unix(login:auth): check pass; user unknown
Jul 27 20:30:16 f3lix85-arch login: pam_unix(login:auth): authentication failure; logname=LOGIN uid=0 euid=0 tty=tty1 ruser= rhost=
Jul 27 20:30:18 f3lix85-arch login: FAILED LOGIN 1 FROM tty1 FOR felix85, Authentication failure
Jul 27 20:30:22 f3lix85-arch login: pam_unix(login:session): session opened for user root by LOGIN(uid=0)
Jul 27 20:30:22 f3lix85-arch login: ROOT LOGIN ON tty1
Jul 27 20:31:34 f3lix85-arch login: pam_unix(login:session): session closed for user root
Jul 27 20:32:10 f3lix85-arch sshd[415]: Server listening on 0.0.0.0 port 22.
Jul 27 20:32:10 f3lix85-arch sshd[415]: Server listening on :: port 22.
Jul 27 20:34:33 f3lix85-arch sshd[553]: Accepted password for root from 192.168.0.2 port 60466 ssh2
Jul 27 20:34:33 f3lix85-arch sshd[553]: pam_unix_session(sshd:session): session opened for user root by (uid=0)
Jul 27 20:36:22 f3lix85-arch sshd[415]: Received signal 15; terminating.
Jul 27 20:36:22 f3lix85-arch sshd[553]: Exiting on signal 15
Jul 27 20:36:22 f3lix85-arch sshd[553]: pam_unix_session(sshd:session): session closed for user root
Jul 27 20:36:59 f3lix85-arch sshd[417]: Server listening on 0.0.0.0 port 22.
Jul 27 20:36:59 f3lix85-arch sshd[417]: Server listening on :: port 22.
Jul 27 20:37:06 f3lix85-arch login: pam_unix(login:session): session opened for user root by LOGIN(uid=0)
Jul 27 20:37:06 f3lix85-arch login: ROOT LOGIN ON tty1
Jul 27 20:37:08 f3lix85-arch login: pam_unix(login:session): session closed for user root
Jul 27 20:37:09 f3lix85-arch sshd[417]: Received signal 15; terminating.
Jul 27 20:37:47 f3lix85-arch sshd[425]: Server listening on 0.0.0.0 port 22.
Jul 27 20:37:47 f3lix85-arch sshd[425]: Server listening on :: port 22.
Jul 27 20:37:55 f3lix85-arch login: pam_unix(login:session): session opened for user root by LOGIN(uid=0)
Jul 27 20:37:55 f3lix85-arch login: ROOT LOGIN ON tty1
Jul 27 20:39:02 f3lix85-arch login: pam_unix(login:session): session closed for user root
Jul 27 20:39:03 f3lix85-arch sshd[425]: Received signal 15; terminating.
Jul 27 20:39:41 f3lix85-arch sshd[424]: Server listening on 0.0.0.0 port 22.
Jul 27 20:39:41 f3lix85-arch sshd[424]: Server listening on :: port 22.
Jul 27 20:39:50 f3lix85-arch login: pam_unix(login:session): session opened for user root by LOGIN(uid=0)
Jul 27 20:39:50 f3lix85-arch login: ROOT LOGIN ON tty1
Jul 27 20:45:00 f3lix85-arch useradd[708]: new group: name=felix85, GID=1000
Jul 27 20:45:00 f3lix85-arch useradd[708]: new user: name=felix85, UID=1000, GID=1000, home=/home/felix85, shell=/bin/bash
Jul 27 20:45:01 f3lix85-arch useradd[708]: add 'felix85' to group 'wheel'
Jul 27 20:45:01 f3lix85-arch useradd[708]: add 'felix85' to group 'games'
Jul 27 20:45:01 f3lix85-arch useradd[708]: add 'felix85' to group 'network'
Jul 27 20:45:01 f3lix85-arch useradd[708]: add 'felix85' to group 'video'
Jul 27 20:45:01 f3lix85-arch useradd[708]: add 'felix85' to group 'audio'
Jul 27 20:45:01 f3lix85-arch useradd[708]: add 'felix85' to group 'optical'
Jul 27 20:45:01 f3lix85-arch useradd[708]: add 'felix85' to group 'storage'
Jul 27 20:45:01 f3lix85-arch useradd[708]: add 'felix85' to group 'power'
Jul 27 20:45:01 f3lix85-arch useradd[708]: add 'felix85' to group 'users'
Jul 27 20:45:01 f3lix85-arch useradd[708]: add 'felix85' to shadow group 'wheel'
Jul 27 20:45:01 f3lix85-arch useradd[708]: add 'felix85' to shadow group 'games'
Jul 27 20:45:01 f3lix85-arch useradd[708]: add 'felix85' to shadow group 'network'
Jul 27 20:45:01 f3lix85-arch useradd[708]: add 'felix85' to shadow group 'video'
Jul 27 20:45:01 f3lix85-arch useradd[708]: add 'felix85' to shadow group 'audio'
Jul 27 20:45:01 f3lix85-arch useradd[708]: add 'felix85' to shadow group 'optical'
Jul 27 20:45:01 f3lix85-arch useradd[708]: add 'felix85' to shadow group 'storage'
Jul 27 20:45:01 f3lix85-arch useradd[708]: add 'felix85' to shadow group 'power'
Jul 27 20:45:01 f3lix85-arch useradd[708]: add 'felix85' to shadow group 'users'
Jul 27 20:45:15 f3lix85-arch passwd[713]: pam_unix(passwd:chauthtok): password changed for felix85
Jul 27 20:45:17 f3lix85-arch login: pam_unix(login:session): session closed for user root
Jul 27 20:45:24 f3lix85-arch login: pam_unix(login:session): session opened for user felix85 by LOGIN(uid=0)
Jul 27 20:45:24 f3lix85-arch login: LOGIN ON tty1 BY felix85
Jul 27 21:01:01 f3lix85-arch /usr/sbin/crond[1360]: pam_unix(crond:session): session opened for user root by (uid=0)
Jul 27 21:01:02 f3lix85-arch /USR/SBIN/CROND[1360]: pam_unix(crond:session): session closed for user root
Jul 27 22:01:01 f3lix85-arch /usr/sbin/crond[2993]: pam_unix(crond:session): session opened for user root by (uid=0)
Jul 27 22:01:01 f3lix85-arch /USR/SBIN/CROND[2993]: pam_unix(crond:session): session closed for user root
Jul 27 23:01:01 f3lix85-arch /usr/sbin/crond[5585]: pam_unix(crond:session): session opened for user root by (uid=0)
Jul 27 23:01:01 f3lix85-arch /USR/SBIN/CROND[5585]: pam_unix(crond:session): session closed for user root
Jul 28 00:01:01 f3lix85-arch /usr/sbin/crond[8044]: pam_unix(crond:session): session opened for user root by (uid=0)
Jul 28 00:01:01 f3lix85-arch /USR/SBIN/CROND[8044]: pam_unix(crond:session): session closed for user root
Jul 28 01:01:01 f3lix85-arch /usr/sbin/crond[10554]: pam_unix(crond:session): session opened for user root by (uid=0)
Jul 28 01:01:01 f3lix85-arch /USR/SBIN/CROND[10554]: pam_unix(crond:session): session closed for user root
Jul 28 01:54:45 f3lix85-arch sudo: felix85 : TTY=tty1 ; PWD=/home/felix85 ; USER=root ; COMMAND=/usr/bin/pacman -Sy
Jul 28 01:54:45 f3lix85-arch sudo: pam_unix(sudo:session): session opened for user root by felix85(uid=0)
Jul 28 01:55:47 f3lix85-arch sudo: pam_unix(sudo:session): session closed for user root
Jul 28 01:55:56 f3lix85-arch sudo: felix85 : TTY=tty1 ; PWD=/home/felix85 ; USER=root ; COMMAND=/usr/bin/pacman -Su
Jul 28 01:55:56 f3lix85-arch sudo: pam_unix(sudo:session): session opened for user root by felix85(uid=0)
Jul 28 01:55:56 f3lix85-arch sudo: pam_unix(sudo:session): session closed for user root
Jul 28 01:56:10 f3lix85-arch sudo: felix85 : TTY=tty1 ; PWD=/home/felix85 ; USER=root ; COMMAND=/usr/bin/pacman -S xorg-server
Jul 28 01:56:10 f3lix85-arch sudo: pam_unix(sudo:session): session opened for user root by felix85(uid=0)
Jul 28 01:58:07 f3lix85-arch sudo: pam_unix(sudo:session): session closed for user root
Jul 28 01:59:25 f3lix85-arch sudo: felix85 : TTY=tty1 ; PWD=/home/felix85 ; USER=root ; COMMAND=/usr/bin/pacman -S xf86-video-intel
Jul 28 01:59:25 f3lix85-arch sudo: pam_unix(sudo:session): session opened for user root by felix85(uid=0)
Jul 28 02:00:10 f3lix85-arch sudo: pam_unix(sudo:session): session closed for user root
Jul 28 02:01:01 f3lix85-arch /usr/sbin/crond[13451]: pam_unix(crond:session): session opened for user root by (uid=0)
Jul 28 02:01:01 f3lix85-arch /USR/SBIN/CROND[13451]: pam_unix(crond:session): session closed for user root
Jul 28 02:04:11 f3lix85-arch sudo: felix85 : TTY=tty1 ; PWD=/home/felix85 ; USER=root ; COMMAND=/usr/bin/pacman -S dbus
Jul 28 02:04:11 f3lix85-arch sudo: pam_unix(sudo:session): session opened for user root by felix85(uid=0)
Jul 28 02:04:13 f3lix85-arch sudo: pam_unix(sudo:session): session closed for user root
Jul 28 02:04:30 f3lix85-arch sudo: felix85 : TTY=tty1 ; PWD=/home/felix85 ; USER=root ; COMMAND=/usr/sbin/rc.d start dbus
Jul 28 02:04:30 f3lix85-arch sudo: pam_unix(sudo:session): session opened for user root by felix85(uid=0)
Jul 28 02:04:30 f3lix85-arch sudo: pam_unix(sudo:session): session closed for user root
Jul 28 02:05:10 f3lix85-arch sudo: felix85 : TTY=tty1 ; PWD=/home/felix85 ; USER=root ; COMMAND=/usr/bin/nano /etc/rc.conf
Jul 28 02:05:10 f3lix85-arch sudo: pam_unix(sudo:session): session opened for user root by felix85(uid=0)
Jul 28 02:05:19 f3lix85-arch sudo: pam_unix(sudo:session): session closed for user root
Jul 28 02:05:37 f3lix85-arch sudo: felix85 : TTY=tty1 ; PWD=/home/felix85 ; USER=root ; COMMAND=/usr/bin/pacman -S gnome
Jul 28 02:05:37 f3lix85-arch sudo: pam_unix(sudo:session): session opened for user root by felix85(uid=0)
Jul 28 02:17:31 f3lix85-arch groupadd[15603]: group added to /etc/group: name=avahi, GID=84
Jul 28 02:17:31 f3lix85-arch groupadd[15603]: group added to /etc/gshadow: name=avahi
Jul 28 02:17:31 f3lix85-arch groupadd[15603]: new group: name=avahi, GID=84
Jul 28 02:17:31 f3lix85-arch useradd[15608]: new user: name=avahi, UID=84, GID=84, home=/, shell=/bin/false
Jul 28 02:18:20 f3lix85-arch groupadd[15729]: group added to /etc/group: name=usbmux, GID=140
Jul 28 02:18:20 f3lix85-arch groupadd[15729]: group added to /etc/gshadow: name=usbmux
Jul 28 02:18:20 f3lix85-arch groupadd[15729]: new group: name=usbmux, GID=140
Jul 28 02:18:20 f3lix85-arch useradd[15733]: new user: name=usbmux, UID=140, GID=140, home=/, shell=/sbin/nologin
Jul 28 02:18:21 f3lix85-arch passwd[15738]: password for 'usbmux' changed by 'root'
Jul 28 02:18:23 f3lix85-arch groupadd[15752]: group added to /etc/group: name=rtkit, GID=133
Jul 28 02:18:23 f3lix85-arch groupadd[15752]: group added to /etc/gshadow: name=rtkit
Jul 28 02:18:23 f3lix85-arch groupadd[15752]: new group: name=rtkit, GID=133
Jul 28 02:18:23 f3lix85-arch useradd[15757]: new user: name=rtkit, UID=133, GID=133, home=/proc, shell=/sbin/nologin
Jul 28 02:19:05 f3lix85-arch sudo: pam_unix(sudo:session): session closed for user root
Jul 28 02:19:20 f3lix85-arch sudo: felix85 : TTY=tty1 ; PWD=/home/felix85 ; USER=root ; COMMAND=/usr/bin/pacman -Ss libsoup
Jul 28 02:19:20 f3lix85-arch sudo: pam_unix(sudo:session): session opened for user root by felix85(uid=0)
Jul 28 02:19:20 f3lix85-arch sudo: pam_unix(sudo:session): session closed for user root
Jul 28 02:20:00 f3lix85-arch sudo: felix85 : TTY=tty1 ; PWD=/home/felix85 ; USER=root ; COMMAND=/usr/bin/pacman -S opengl-man-pages
Jul 28 02:20:00 f3lix85-arch sudo: pam_unix(sudo:session): session opened for user root by felix85(uid=0)
Jul 28 02:20:11 f3lix85-arch sudo: pam_unix(sudo:session): session closed for user root
Jul 28 02:22:02 f3lix85-arch sudo: felix85 : TTY=tty1 ; PWD=/home/felix85 ; USER=root ; COMMAND=/usr/bin/pacman -S slim archlinux-themes-slim
Jul 28 02:22:02 f3lix85-arch sudo: pam_unix(sudo:session): session opened for user root by felix85(uid=0)
Jul 28 02:22:17 f3lix85-arch sudo: pam_unix(sudo:session): session closed for user root
Jul 28 02:23:27 f3lix85-arch sudo: felix85 : TTY=tty1 ; PWD=/home/felix85 ; USER=root ; COMMAND=/usr/bin/nano /etc/inittab
Jul 28 02:23:27 f3lix85-arch sudo: pam_unix(sudo:session): session opened for user root by felix85(uid=0)
Jul 28 02:23:44 f3lix85-arch sudo: pam_unix(sudo:session): session closed for user root
Jul 28 02:30:31 f3lix85-arch sudo: felix85 : TTY=tty1 ; PWD=/home/felix85 ; USER=root ; COMMAND=/usr/bin/nano /etc/slim.conf
Jul 28 02:30:31 f3lix85-arch sudo: pam_unix(sudo:session): session opened for user root by felix85(uid=0)
Jul 28 02:31:50 f3lix85-arch sudo: pam_unix(sudo:session): session closed for user root
Jul 28 02:32:03 f3lix85-arch sudo: felix85 : TTY=tty1 ; PWD=/home/felix85 ; USER=root ; COMMAND=/usr/bin/nano /etc/pam.d/slim
Jul 28 02:32:03 f3lix85-arch sudo: pam_unix(sudo:session): session opened for user root by felix85(uid=0)
Jul 28 02:33:18 f3lix85-arch sudo: pam_unix(sudo:session): session closed for user root
Jul 28 02:33:30 f3lix85-arch sudo: felix85 : TTY=tty1 ; PWD=/home/felix85 ; USER=root ; COMMAND=/usr/bin/nano /etc/pam.d/passwd
Jul 28 02:33:30 f3lix85-arch sudo: pam_unix(sudo:session): session opened for user root by felix85(uid=0)
Jul 28 02:34:01 f3lix85-arch sudo: pam_unix(sudo:session): session closed for user root
Jul 28 02:34:06 f3lix85-arch sudo: felix85 : TTY=tty1 ; PWD=/home/felix85 ; USER=root ; COMMAND=/usr/bin/nano /etc/pam.d/slim
Jul 28 02:34:06 f3lix85-arch sudo: pam_unix(sudo:session): session opened for user root by felix85(uid=0)
Jul 28 02:34:18 f3lix85-arch sudo: pam_unix(sudo:session): session closed for user root
Jul 28 02:35:22 f3lix85-arch sudo: felix85 : TTY=tty1 ; PWD=/home/felix85 ; USER=root ; COMMAND=/usr/bin/pacman -Ss ck-launch
Jul 28 02:35:22 f3lix85-arch sudo: pam_unix(sudo:session): session opened for user root by felix85(uid=0)
Jul 28 02:35:22 f3lix85-arch sudo: pam_unix(sudo:session): session closed for user root
Jul 28 02:36:07 f3lix85-arch sudo: felix85 : TTY=tty1 ; PWD=/home/felix85 ; USER=root ; COMMAND=/usr/bin/pacman -Ss consolkit
Jul 28 02:36:07 f3lix85-arch sudo: pam_unix(sudo:session): session opened for user root by felix85(uid=0)
Jul 28 02:36:07 f3lix85-arch sudo: pam_unix(sudo:session): session closed for user root
Jul 28 02:36:19 f3lix85-arch sudo: felix85 : TTY=tty1 ; PWD=/home/felix85 ; USER=root ; COMMAND=/usr/bin/pacman -Ss consolekit
Jul 28 02:36:19 f3lix85-arch sudo: pam_unix(sudo:session): session opened for user root by felix85(uid=0)
Jul 28 02:36:19 f3lix85-arch sudo: pam_unix(sudo:session): session closed for user root
Jul 28 02:36:32 f3lix85-arch sudo: felix85 : TTY=tty1 ; PWD=/home/felix85 ; USER=root ; COMMAND=/usr/bin/nano /etc/slim.conf
Jul 28 02:36:32 f3lix85-arch sudo: pam_unix(sudo:session): session opened for user root by felix85(uid=0)
Jul 28 02:39:28 f3lix85-arch sudo: pam_unix(sudo:session): session closed for user root
Jul 28 02:45:30 f3lix85-arch sudo: felix85 : TTY=tty1 ; PWD=/home/felix85 ; USER=root ; COMMAND=/sbin/reboot
Jul 28 02:45:30 f3lix85-arch sudo: pam_unix(sudo:session): session opened for user root by felix85(uid=0)
Jul 28 02:45:31 f3lix85-arch sudo: pam_unix(sudo:session): session closed for user root
Jul 28 02:45:31 f3lix85-arch login: pam_unix(login:session): session closed for user felix85
Jul 28 02:45:33 f3lix85-arch sshd[424]: Received signal 15; terminating.
Jul 28 02:46:09 f3lix85-arch sshd[446]: Server listening on 0.0.0.0 port 22.
Jul 28 02:46:09 f3lix85-arch sshd[446]: Server listening on :: port 22.
Jul 28 02:46:25 f3lix85-arch slim: pam_unix(slim:session): session opened for user felix85 by (uid=0)
Jul 28 02:46:25 f3lix85-arch gnome-keyring-daemon[500]: couldn't create socket directory: No such file or directory
Jul 28 02:46:25 f3lix85-arch gnome-keyring-daemon[500]: couldn't bind to control socket: /home/felix85/.cache/keyring-RPlUb3/control: No such file or directory
Jul 28 02:46:26 f3lix85-arch gnome-keyring-daemon[593]: couldn't create socket directory: No such file or directory
Jul 28 02:46:26 f3lix85-arch gnome-keyring-daemon[593]: couldn't bind to control socket: /home/felix85/.cache/keyring-PjzFka/control: No such file or directory
Jul 28 02:46:26 f3lix85-arch gnome-keyring-daemon[594]: couldn't create socket directory: No such file or directory
Jul 28 02:46:26 f3lix85-arch gnome-keyring-daemon[594]: couldn't bind to control socket: /home/felix85/.cache/keyring-Ulkau9/control: No such file or directory
Jul 28 02:46:26 f3lix85-arch gnome-keyring-daemon[595]: couldn't create socket directory: No such file or directory
Jul 28 02:46:26 f3lix85-arch gnome-keyring-daemon[595]: couldn't bind to control socket: /home/felix85/.cache/keyring-NtKWN9/control: No such file or directory
Jul 28 02:46:26 f3lix85-arch gnome-keyring-daemon[596]: couldn't create socket directory: No such file or directory
Jul 28 02:46:26 f3lix85-arch gnome-keyring-daemon[596]: couldn't bind to control socket: /home/felix85/.cache/keyring-2wh0Cd/control: No such file or directory
Jul 28 02:46:43 f3lix85-arch dbus[410]: [system] Rejected send message, 2 matched rules; type="method_call", sender=":1.23" (uid=1000 pid=723 comm="/usr/bin/gnome-shell ") interface="org.freedesktop.DBus.Properties" member="GetAll" error name="(unset)" requested_reply="0" destination=":1.1" (uid=0 pid=502 comm="/usr/sbin/console-kit-daemon --no-daemon ")
Jul 28 02:46:44 f3lix85-arch polkitd(authority=local): Registered Authentication Agent for unix-session:/org/freedesktop/ConsoleKit/Session2 (system bus name :1.23 [/usr/bin/gnome-shell], object path /org/freedesktop/PolicyKit1/AuthenticationAgent, locale en_US.UTF-8)
Jul 28 02:46:44 f3lix85-arch dbus[410]: [system] Rejected send message, 2 matched rules; type="method_call", sender=":1.23" (uid=1000 pid=723 comm="/usr/bin/gnome-shell ") interface="org.freedesktop.DBus.Properties" member="GetAll" error name="(unset)" requested_reply="0" destination=":1.1" (uid=0 pid=502 comm="/usr/sbin/console-kit-daemon --no-daemon ")
Jul 28 02:46:44 f3lix85-arch dbus[410]: [system] Rejected send message, 2 matched rules; type="method_call", sender=":1.23" (uid=1000 pid=723 comm="/usr/bin/gnome-shell ") interface="org.freedesktop.DBus.Properties" member="GetAll" error name="(unset)" requested_reply="0" destination=":1.1" (uid=0 pid=502 comm="/usr/sbin/console-kit-daemon --no-daemon ")
Jul 28 02:46:44 f3lix85-arch dbus[410]: [system] Rejected send message, 2 matched rules; type="method_call", sender=":1.23" (uid=1000 pid=723 comm="/usr/bin/gnome-shell ") interface="org.freedesktop.DBus.Properties" member="GetAll" error name="(unset)" requested_reply="0" destination=":1.1" (uid=0 pid=502 comm="/usr/sbin/console-kit-daemon --no-daemon ")
Jul 28 02:46:44 f3lix85-arch dbus[410]: [system] Rejected send message, 2 matched rules; type="method_call", sender=":1.23" (uid=1000 pid=723 comm="/usr/bin/gnome-shell ") interface="org.freedesktop.DBus.Properties" member="GetAll" error name="(unset)" requested_reply="0" destination=":1.1" (uid=0 pid=502 comm="/usr/sbin/console-kit-daemon --no-daemon ")
Jul 28 02:46:45 f3lix85-arch dbus[410]: [system] Rejected send message, 2 matched rules; type="method_call", sender=":1.23" (uid=1000 pid=723 comm="/usr/bin/gnome-shell ") interface="org.freedesktop.DBus.Properties" member="GetAll" error name="(unset)" requested_reply="0" destination=":1.1" (uid=0 pid=502 comm="/usr/sbin/console-kit-daemon --no-daemon ")
Jul 28 02:46:45 f3lix85-arch dbus[410]: [system] Rejected send message, 2 matched rules; type="method_call", sender=":1.23" (uid=1000 pid=723 comm="/usr/bin/gnome-shell ") interface="org.freedesktop.DBus.Properties" member="GetAll" error name="(unset)" requested_reply="0" destination=":1.1" (uid=0 pid=502 comm="/usr/sbin/console-kit-daemon --no-daemon ")
Jul 28 02:52:29 f3lix85-arch sudo: felix85 : TTY=pts/0 ; PWD=/home/felix85 ; USER=root ; COMMAND=/usr/bin/pacman -S ntp
Jul 28 02:52:29 f3lix85-arch sudo: pam_unix(sudo:session): session opened for user root by felix85(uid=0)
Jul 28 02:52:39 f3lix85-arch groupadd[1082]: group added to /etc/group: name=ntp, GID=87
Jul 28 02:52:39 f3lix85-arch groupadd[1082]: group added to /etc/gshadow: name=ntp
Jul 28 02:52:39 f3lix85-arch groupadd[1082]: new group: name=ntp, GID=87
Jul 28 02:52:39 f3lix85-arch useradd[1087]: new user: name=ntp, UID=87, GID=87, home=/var/lib/ntp, shell=/bin/false
Jul 28 02:52:40 f3lix85-arch sudo: pam_unix(sudo:session): session closed for user root
Jul 28 02:52:55 f3lix85-arch sudo: felix85 : TTY=pts/0 ; PWD=/home/felix85 ; USER=root ; COMMAND=/usr/bin/nano /etc/ntp.conf
Jul 28 02:52:55 f3lix85-arch sudo: pam_unix(sudo:session): session opened for user root by felix85(uid=0)
Jul 28 02:54:15 f3lix85-arch sudo: pam_unix(sudo:session): session closed for user root
Jul 28 02:54:25 f3lix85-arch sudo: felix85 : TTY=pts/0 ; PWD=/home/felix85 ; USER=root ; COMMAND=/usr/bin/nano /etc/rc.local
Jul 28 02:54:25 f3lix85-arch sudo: pam_unix(sudo:session): session opened for user root by felix85(uid=0)
Jul 28 02:55:07 f3lix85-arch sudo: pam_unix(sudo:session): session closed for user root
Jul 28 02:55:19 f3lix85-arch sudo: felix85 : TTY=pts/0 ; PWD=/home/felix85 ; USER=root ; COMMAND=/usr/bin/nano /etc/rc.conf
Jul 28 02:55:19 f3lix85-arch sudo: pam_unix(sudo:session): session opened for user root by felix85(uid=0)
Jul 28 02:55:42 f3lix85-arch sudo: pam_unix(sudo:session): session closed for user root
Jul 28 02:55:55 f3lix85-arch slim: pam_unix(slim:session): session closed for user felix85
Jul 28 02:55:55 f3lix85-arch polkitd(authority=local): Unregistered Authentication Agent for unix-session:/org/freedesktop/ConsoleKit/Session2 (system bus name :1.23, object path /org/freedesktop/PolicyKit1/AuthenticationAgent, locale en_US.UTF-8) (disconnected from bus)
Jul 28 02:56:21 f3lix85-arch slim: pam_unix(slim:auth): check pass; user unknown
Jul 28 02:56:21 f3lix85-arch slim: pam_unix(slim:auth): authentication failure; logname= uid=0 euid=0 tty=:0.0 ruser=root rhost=
Jul 28 02:56:21 f3lix85-arch slim: gkr-pam: error looking up user information
Jul 28 02:56:53 f3lix85-arch sshd[446]: Received signal 15; terminating.
Jul 28 02:57:32 f3lix85-arch sshd[474]: Server listening on 0.0.0.0 port 22.
Jul 28 02:57:32 f3lix85-arch sshd[474]: Server listening on :: port 22.
Jul 28 10:59:35 f3lix85-arch slim: pam_unix(slim:session): session opened for user felix85 by (uid=0)
Jul 28 10:59:37 f3lix85-arch gnome-keyring-daemon[544]: couldn't set environment variable in session: The name org.gnome.SessionManager was not provided by any .service files
Jul 28 10:59:37 f3lix85-arch gnome-keyring-daemon[544]: couldn't set environment variable in session: The name org.gnome.SessionManager was not provided by any .service files
Jul 28 10:59:37 f3lix85-arch gnome-keyring-daemon[544]: couldn't set environment variable in session: The name org.gnome.SessionManager was not provided by any .service files
Jul 28 10:59:38 f3lix85-arch gnome-keyring-daemon[544]: The GPG agent was already initialized
Jul 28 10:59:38 f3lix85-arch gnome-keyring-daemon[544]: The Secret Service was already initialized
Jul 28 10:59:38 f3lix85-arch gnome-keyring-daemon[544]: The PKCS#11 component was already initialized
Jul 28 10:59:38 f3lix85-arch gnome-keyring-daemon[544]: The SSH agent was already initialized
Jul 28 10:59:53 f3lix85-arch dbus[438]: [system] Rejected send message, 2 matched rules; type="method_call", sender=":1.23" (uid=1000 pid=753 comm="/usr/bin/gnome-shell ") interface="org.freedesktop.DBus.Properties" member="GetAll" error name="(unset)" requested_reply="0" destination=":1.1" (uid=0 pid=547 comm="/usr/sbin/console-kit-daemon --no-daemon ")
Jul 28 10:59:53 f3lix85-arch polkitd(authority=local): Registered Authentication Agent for unix-session:/org/freedesktop/ConsoleKit/Session2 (system bus name :1.23 [/usr/bin/gnome-shell], object path /org/freedesktop/PolicyKit1/AuthenticationAgent, locale en_US.UTF-8)
Jul 28 10:59:54 f3lix85-arch dbus[438]: [system] Rejected send message, 2 matched rules; type="method_call", sender=":1.23" (uid=1000 pid=753 comm="/usr/bin/gnome-shell ") interface="org.freedesktop.DBus.Properties" member="GetAll" error name="(unset)" requested_reply="0" destination=":1.1" (uid=0 pid=547 comm="/usr/sbin/console-kit-daemon --no-daemon ")
Jul 28 10:59:54 f3lix85-arch dbus[438]: [system] Rejected send message, 2 matched rules; type="method_call", sender=":1.23" (uid=1000 pid=753 comm="/usr/bin/gnome-shell ") interface="org.freedesktop.DBus.Properties" member="GetAll" error name="(unset)" requested_reply="0" destination=":1.1" (uid=0 pid=547 comm="/usr/sbin/console-kit-daemon --no-daemon ")
Jul 28 10:59:54 f3lix85-arch dbus[438]: [system] Rejected send message, 2 matched rules; type="method_call", sender=":1.23" (uid=1000 pid=753 comm="/usr/bin/gnome-shell ") interface="org.freedesktop.DBus.Properties" member="GetAll" error name="(unset)" requested_reply="0" destination=":1.1" (uid=0 pid=547 comm="/usr/sbin/console-kit-daemon --no-daemon ")
Jul 28 10:59:54 f3lix85-arch dbus[438]: [system] Rejected send message, 2 matched rules; type="method_call", sender=":1.23" (uid=1000 pid=753 comm="/usr/bin/gnome-shell ") interface="org.freedesktop.DBus.Properties" member="GetAll" error name="(unset)" requested_reply="0" destination=":1.1" (uid=0 pid=547 comm="/usr/sbin/console-kit-daemon --no-daemon ")
Jul 28 10:59:54 f3lix85-arch dbus[438]: [system] Rejected send message, 2 matched rules; type="method_call", sender=":1.23" (uid=1000 pid=753 comm="/usr/bin/gnome-shell ") interface="org.freedesktop.DBus.Properties" member="GetAll" error name="(unset)" requested_reply="0" destination=":1.1" (uid=0 pid=547 comm="/usr/sbin/console-kit-daemon --no-daemon ")
Jul 28 10:59:54 f3lix85-arch dbus[438]: [system] Rejected send message, 2 matched rules; type="method_call", sender=":1.23" (uid=1000 pid=753 comm="/usr/bin/gnome-shell ") interface="org.freedesktop.DBus.Properties" member="GetAll" error name="(unset)" requested_reply="0" destination=":1.1" (uid=0 pid=547 comm="/usr/sbin/console-kit-daemon --no-daemon ")
Jul 28 11:00:27 f3lix85-arch slim: pam_unix(slim:session): session closed for user felix85
Jul 28 11:00:27 f3lix85-arch polkitd(authority=local): Unregistered Authentication Agent for unix-session:/org/freedesktop/ConsoleKit/Session2 (system bus name :1.23, object path /org/freedesktop/PolicyKit1/AuthenticationAgent, locale en_US.UTF-8) (disconnected from bus)
Jul 28 11:00:35 f3lix85-arch slim: pam_unix(slim:session): session opened for user felix85 by (uid=0)
Jul 28 11:00:35 f3lix85-arch gnome-keyring-daemon[905]: couldn't set environment variable in session: The name org.gnome.SessionManager was not provided by any .service files
Jul 28 11:00:35 f3lix85-arch gnome-keyring-daemon[905]: couldn't set environment variable in session: The name org.gnome.SessionManager was not provided by any .service files
Jul 28 11:00:35 f3lix85-arch gnome-keyring-daemon[905]: couldn't set environment variable in session: The name org.gnome.SessionManager was not provided by any .service files
Jul 28 11:00:35 f3lix85-arch gnome-keyring-daemon[905]: The GPG agent was already initialized
Jul 28 11:00:35 f3lix85-arch gnome-keyring-daemon[905]: The Secret Service was already initialized
Jul 28 11:00:35 f3lix85-arch gnome-keyring-daemon[905]: The PKCS#11 component was already initialized
Jul 28 11:00:35 f3lix85-arch gnome-keyring-daemon[905]: The SSH agent was already initialized
Jul 28 11:00:39 f3lix85-arch dbus[438]: [system] Rejected send message, 2 matched rules; type="method_call", sender=":1.41" (uid=1000 pid=964 comm="/usr/bin/gnome-shell ") interface="org.freedesktop.DBus.Properties" member="GetAll" error name="(unset)" requested_reply="0" destination=":1.1" (uid=0 pid=547 comm="/usr/sbin/console-kit-daemon --no-daemon ")
Jul 28 11:00:39 f3lix85-arch polkitd(authority=local): Registered Authentication Agent for unix-session:/org/freedesktop/ConsoleKit/Session4 (system bus name :1.41 [/usr/bin/gnome-shell], object path /org/freedesktop/PolicyKit1/AuthenticationAgent, locale en_US.UTF-8)
Jul 28 11:00:40 f3lix85-arch dbus[438]: [system] Rejected send message, 2 matched rules; type="method_call", sender=":1.41" (uid=1000 pid=964 comm="/usr/bin/gnome-shell ") interface="org.freedesktop.DBus.Properties" member="GetAll" error name="(unset)" requested_reply="0" destination=":1.1" (uid=0 pid=547 comm="/usr/sbin/console-kit-daemon --no-daemon ")
Jul 28 11:00:40 f3lix85-arch dbus[438]: [system] Rejected send message, 2 matched rules; type="method_call", sender=":1.41" (uid=1000 pid=964 comm="/usr/bin/gnome-shell ") interface="org.freedesktop.DBus.Properties" member="GetAll" error name="(unset)" requested_reply="0" destination=":1.1" (uid=0 pid=547 comm="/usr/sbin/console-kit-daemon --no-daemon ")
Jul 28 11:00:40 f3lix85-arch dbus[438]: [system] Rejected send message, 2 matched rules; type="method_call", sender=":1.41" (uid=1000 pid=964 comm="/usr/bin/gnome-shell ") interface="org.freedesktop.DBus.Properties" member="GetAll" error name="(unset)" requested_reply="0" destination=":1.1" (uid=0 pid=547 comm="/usr/sbin/console-kit-daemon --no-daemon ")
Jul 28 11:00:40 f3lix85-arch dbus[438]: [system] Rejected send message, 2 matched rules; type="method_call", sender=":1.41" (uid=1000 pid=964 comm="/usr/bin/gnome-shell ") interface="org.freedesktop.DBus.Properties" member="GetAll" error name="(unset)" requested_reply="0" destination=":1.1" (uid=0 pid=547 comm="/usr/sbin/console-kit-daemon --no-daemon ")
Jul 28 11:00:40 f3lix85-arch dbus[438]: [system] Rejected send message, 2 matched rules; type="method_call", sender=":1.41" (uid=1000 pid=964 comm="/usr/bin/gnome-shell ") interface="org.freedesktop.DBus.Properties" member="GetAll" error name="(unset)" requested_reply="0" destination=":1.1" (uid=0 pid=547 comm="/usr/sbin/console-kit-daemon --no-daemon ")
Jul 28 11:00:40 f3lix85-arch dbus[438]: [system] Rejected send message, 2 matched rules; type="method_call", sender=":1.41" (uid=1000 pid=964 comm="/usr/bin/gnome-shell ") interface="org.freedesktop.DBus.Properties" member="GetAll" error name="(unset)" requested_reply="0" destination=":1.1" (uid=0 pid=547 comm="/usr/sbin/console-kit-daemon --no-daemon ")
Jul 28 11:01:01 f3lix85-arch /usr/sbin/crond[1024]: pam_unix(crond:session): session opened for user root by (uid=0)
Jul 28 11:01:01 f3lix85-arch /USR/SBIN/CROND[1024]: pam_unix(crond:session): session closed for user root
Jul 28 11:03:16 f3lix85-arch slim: pam_unix(slim:session): session closed for user felix85
Jul 28 11:03:16 f3lix85-arch polkitd(authority=local): Unregistered Authentication Agent for unix-session:/org/freedesktop/ConsoleKit/Session4 (system bus name :1.41, object path /org/freedesktop/PolicyKit1/AuthenticationAgent, locale en_US.UTF-8) (disconnected from bus)
Jul 28 11:03:32 f3lix85-arch sshd[474]: Received signal 15; terminating.
Jul 28 03:02:17 f3lix85-arch sshd[471]: Server listening on 0.0.0.0 port 22.
Jul 28 03:02:17 f3lix85-arch sshd[471]: Server listening on :: port 22.
Jul 28 11:04:23 f3lix85-arch slim: pam_unix(slim:session): session opened for user felix85 by (uid=0)
Jul 28 11:04:25 f3lix85-arch gnome-keyring-daemon[528]: couldn't set environment variable in session: The name org.gnome.SessionManager was not provided by any .service files
Jul 28 11:04:25 f3lix85-arch gnome-keyring-daemon[528]: couldn't set environment variable in session: The name org.gnome.SessionManager was not provided by any .service files
Jul 28 11:04:25 f3lix85-arch gnome-keyring-daemon[528]: couldn't set environment variable in session: The name org.gnome.SessionManager was not provided by any .service files
Jul 28 11:04:26 f3lix85-arch gnome-keyring-daemon[528]: The GPG agent was already initialized
Jul 28 11:04:26 f3lix85-arch gnome-keyring-daemon[528]: The Secret Service was already initialized
Jul 28 11:04:26 f3lix85-arch gnome-keyring-daemon[528]: The PKCS#11 component was already initialized
Jul 28 11:04:26 f3lix85-arch gnome-keyring-daemon[528]: The SSH agent was already initialized
Jul 28 11:04:40 f3lix85-arch dbus[435]: [system] Rejected send message, 2 matched rules; type="method_call", sender=":1.23" (uid=1000 pid=752 comm="/usr/bin/gnome-shell ") interface="org.freedesktop.DBus.Properties" member="GetAll" error name="(unset)" requested_reply="0" destination=":1.1" (uid=0 pid=531 comm="/usr/sbin/console-kit-daemon --no-daemon ")
Jul 28 11:04:41 f3lix85-arch polkitd(authority=local): Registered Authentication Agent for unix-session:/org/freedesktop/ConsoleKit/Session2 (system bus name :1.23 [/usr/bin/gnome-shell], object path /org/freedesktop/PolicyKit1/AuthenticationAgent, locale en_US.UTF-8)
Jul 28 11:04:42 f3lix85-arch dbus[435]: [system] Rejected send message, 2 matched rules; type="method_call", sender=":1.23" (uid=1000 pid=752 comm="/usr/bin/gnome-shell ") interface="org.freedesktop.DBus.Properties" member="GetAll" error name="(unset)" requested_reply="0" destination=":1.1" (uid=0 pid=531 comm="/usr/sbin/console-kit-daemon --no-daemon ")
Jul 28 11:04:42 f3lix85-arch dbus[435]: [system] Rejected send message, 2 matched rules; type="method_call", sender=":1.23" (uid=1000 pid=752 comm="/usr/bin/gnome-shell ") interface="org.freedesktop.DBus.Properties" member="GetAll" error name="(unset)" requested_reply="0" destination=":1.1" (uid=0 pid=531 comm="/usr/sbin/console-kit-daemon --no-daemon ")
Jul 28 11:04:42 f3lix85-arch dbus[435]: [system] Rejected send message, 2 matched rules; type="method_call", sender=":1.23" (uid=1000 pid=752 comm="/usr/bin/gnome-shell ") interface="org.freedesktop.DBus.Properties" member="GetAll" error name="(unset)" requested_reply="0" destination=":1.1" (uid=0 pid=531 comm="/usr/sbin/console-kit-daemon --no-daemon ")
Jul 28 11:04:42 f3lix85-arch dbus[435]: [system] Rejected send message, 2 matched rules; type="method_call", sender=":1.23" (uid=1000 pid=752 comm="/usr/bin/gnome-shell ") interface="org.freedesktop.DBus.Properties" member="GetAll" error name="(unset)" requested_reply="0" destination=":1.1" (uid=0 pid=531 comm="/usr/sbin/console-kit-daemon --no-daemon ")
Jul 28 11:04:42 f3lix85-arch dbus[435]: [system] Rejected send message, 2 matched rules; type="method_call", sender=":1.23" (uid=1000 pid=752 comm="/usr/bin/gnome-shell ") interface="org.freedesktop.DBus.Properties" member="GetAll" error name="(unset)" requested_reply="0" destination=":1.1" (uid=0 pid=531 comm="/usr/sbin/console-kit-daemon --no-daemon ")
Jul 28 11:04:42 f3lix85-arch dbus[435]: [system] Rejected send message, 2 matched rules; type="method_call", sender=":1.23" (uid=1000 pid=752 comm="/usr/bin/gnome-shell ") interface="org.freedesktop.DBus.Properties" member="GetAll" error name="(unset)" requested_reply="0" destination=":1.1" (uid=0 pid=531 comm="/usr/sbin/console-kit-daemon --no-daemon ")
Jul 28 11:13:08 f3lix85-arch sudo: felix85 : TTY=pts/0 ; PWD=/home/felix85 ; USER=root ; COMMAND=/usr/bin/pacman -Ss networkmanager
Jul 28 11:13:08 f3lix85-arch sudo: pam_unix(sudo:session): session opened for user root by felix85(uid=0)
Jul 28 11:13:08 f3lix85-arch sudo: pam_unix(sudo:session): session closed for user root
Jul 28 11:13:42 f3lix85-arch sudo: felix85 : TTY=pts/0 ; PWD=/home/felix85 ; USER=root ; COMMAND=/usr/sbin/rc.d start networkmanager
Jul 28 11:13:42 f3lix85-arch sudo: pam_unix(sudo:session): session opened for user root by felix85(uid=0)
Jul 28 11:13:43 f3lix85-arch sudo: pam_unix(sudo:session): session closed for user root
Jul 28 11:14:23 f3lix85-arch sudo: felix85 : TTY=pts/0 ; PWD=/home/felix85 ; USER=root ; COMMAND=/usr/bin/nano /etc/rc.conf
Jul 28 11:14:23 f3lix85-arch sudo: pam_unix(sudo:session): session opened for user root by felix85(uid=0)
Jul 28 11:15:33 f3lix85-arch sudo: pam_unix(sudo:session): session closed for user root
Jul 28 11:16:27 f3lix85-arch sudo: felix85 : TTY=pts/0 ; PWD=/home/felix85 ; USER=root ; COMMAND=/usr/sbin/groupadd networkmanager
Jul 28 11:16:27 f3lix85-arch sudo: pam_unix(sudo:session): session opened for user root by felix85(uid=0)
Jul 28 11:16:27 f3lix85-arch groupadd[1506]: group added to /etc/group: name=networkmanager, GID=1001
Jul 28 11:16:27 f3lix85-arch groupadd[1506]: group added to /etc/gshadow: name=networkmanager
Jul 28 11:16:27 f3lix85-arch groupadd[1506]: new group: name=networkmanager, GID=1001
Jul 28 11:16:27 f3lix85-arch sudo: pam_unix(sudo:session): session closed for user root
Jul 28 11:16:54 f3lix85-arch sudo: felix85 : TTY=pts/0 ; PWD=/home/felix85 ; USER=root ; COMMAND=/usr/bin/gpasswd -a felix85 networkmanager
Jul 28 11:16:54 f3lix85-arch sudo: pam_unix(sudo:session): session opened for user root by felix85(uid=0)
Jul 28 11:16:54 f3lix85-arch gpasswd[1524]: user felix85 added by root to group networkmanager
Jul 28 11:16:54 f3lix85-arch sudo: pam_unix(sudo:session): session closed for user root
Jul 28 11:17:35 f3lix85-arch sudo: felix85 : TTY=pts/0 ; PWD=/home/felix85 ; USER=root ; COMMAND=/usr/bin/nano /etc/hosts
Jul 28 11:17:35 f3lix85-arch sudo: pam_unix(sudo:session): session opened for user root by felix85(uid=0)
Jul 28 11:18:02 f3lix85-arch sudo: pam_unix(sudo:session): session closed for user root
Jul 28 11:18:07 f3lix85-arch sudo: felix85 : TTY=pts/0 ; PWD=/home/felix85 ; USER=root ; COMMAND=/usr/bin/nano /etc/hostname
Jul 28 11:18:07 f3lix85-arch sudo: pam_unix(sudo:session): session opened for user root by felix85(uid=0)
Jul 28 11:18:09 f3lix85-arch sudo: pam_unix(sudo:session): session closed for user root
Jul 28 11:18:29 f3lix85-arch sudo: felix85 : TTY=pts/0 ; PWD=/home/felix85 ; USER=root ; COMMAND=/usr/bin/nano /etc/rc.conf
Jul 28 11:18:29 f3lix85-arch sudo: pam_unix(sudo:session): session opened for user root by felix85(uid=0)
Jul 28 11:18:40 f3lix85-arch sudo: pam_unix(sudo:session): session closed for user root
Jul 28 11:18:54 f3lix85-arch slim: pam_unix(slim:session): session closed for user felix85
Jul 28 11:18:54 f3lix85-arch polkitd(authority=local): Unregistered Authentication Agent for unix-session:/org/freedesktop/ConsoleKit/Session2 (system bus name :1.23, object path /org/freedesktop/PolicyKit1/AuthenticationAgent, locale en_US.UTF-8) (disconnected from bus)
Jul 28 11:19:07 f3lix85-arch sshd[471]: Received signal 15; terminating.
Jul 28 03:17:51 localhost sshd[442]: Server listening on 0.0.0.0 port 22.
Jul 28 03:17:51 localhost sshd[442]: Server listening on :: port 22.
Jul 28 03:18:04 localhost slim: pam_unix(slim:session): session opened for user felix85 by (uid=0)
Jul 28 03:18:06 localhost gnome-keyring-daemon[500]: couldn't set environment variable in session: The name org.gnome.SessionManager was not provided by any .service files
Jul 28 03:18:06 localhost gnome-keyring-daemon[500]: couldn't set environment variable in session: The name org.gnome.SessionManager was not provided by any .service files
Jul 28 03:18:06 localhost gnome-keyring-daemon[500]: couldn't set environment variable in session: The name org.gnome.SessionManager was not provided by any .service files
Jul 28 03:18:07 localhost gnome-keyring-daemon[500]: The Secret Service was already initialized
Jul 28 03:18:07 localhost gnome-keyring-daemon[500]: The GPG agent was already initialized
Jul 28 03:18:07 localhost gnome-keyring-daemon[500]: The PKCS#11 component was already initialized
Jul 28 03:18:07 localhost gnome-keyring-daemon[500]: The SSH agent was already initialized
Jul 28 11:20:14 localhost dbus[332]: [system] Rejected send message, 2 matched rules; type="method_call", sender=":1.30" (uid=1000 pid=705 comm="/usr/bin/gnome-shell ") interface="org.freedesktop.DBus.Properties" member="GetAll" error name="(unset)" requested_reply="0" destination=":1.9" (uid=0 pid=503 comm="/usr/sbin/console-kit-daemon --no-daemon ")
Jul 28 11:20:14 localhost polkitd(authority=local): Registered Authentication Agent for unix-session:/org/freedesktop/ConsoleKit/Session2 (system bus name :1.30 [/usr/bin/gnome-shell], object path /org/freedesktop/PolicyKit1/AuthenticationAgent, locale en_US.UTF-8)
Jul 28 11:20:16 localhost dbus[332]: [system] Rejected send message, 2 matched rules; type="method_call", sender=":1.30" (uid=1000 pid=705 comm="/usr/bin/gnome-shell ") interface="org.freedesktop.DBus.Properties" member="GetAll" error name="(unset)" requested_reply="0" destination=":1.9" (uid=0 pid=503 comm="/usr/sbin/console-kit-daemon --no-daemon ")
Jul 28 11:20:16 localhost dbus[332]: [system] Rejected send message, 2 matched rules; type="method_call", sender=":1.30" (uid=1000 pid=705 comm="/usr/bin/gnome-shell ") interface="org.freedesktop.DBus.Properties" member="GetAll" error name="(unset)" requested_reply="0" destination=":1.9" (uid=0 pid=503 comm="/usr/sbin/console-kit-daemon --no-daemon ")
Jul 28 11:20:16 localhost dbus[332]: [system] Rejected send message, 2 matched rules; type="method_call", sender=":1.30" (uid=1000 pid=705 comm="/usr/bin/gnome-shell ") interface="org.freedesktop.DBus.Properties" member="GetAll" error name="(unset)" requested_reply="0" destination=":1.9" (uid=0 pid=503 comm="/usr/sbin/console-kit-daemon --no-daemon ")
Jul 28 11:20:16 localhost dbus[332]: [system] Rejected send message, 2 matched rules; type="method_call", sender=":1.30" (uid=1000 pid=705 comm="/usr/bin/gnome-shell ") interface="org.freedesktop.DBus.Properties" member="GetAll" error name="(unset)" requested_reply="0" destination=":1.9" (uid=0 pid=503 comm="/usr/sbin/console-kit-daemon --no-daemon ")
Jul 28 11:20:16 localhost dbus[332]: [system] Rejected send message, 2 matched rules; type="method_call", sender=":1.30" (uid=1000 pid=705 comm="/usr/bin/gnome-shell ") interface="org.freedesktop.DBus.Properties" member="GetAll" error name="(unset)" requested_reply="0" destination=":1.9" (uid=0 pid=503 comm="/usr/sbin/console-kit-daemon --no-daemon ")
Jul 28 11:20:16 localhost dbus[332]: [system] Rejected send message, 2 matched rules; type="method_call", sender=":1.30" (uid=1000 pid=705 comm="/usr/bin/gnome-shell ") interface="org.freedesktop.DBus.Properties" member="GetAll" error name="(unset)" requested_reply="0" destination=":1.9" (uid=0 pid=503 comm="/usr/sbin/console-kit-daemon --no-daemon ")
Jul 28 11:24:28 localhost sudo: felix85 : TTY=pts/0 ; PWD=/home/felix85 ; USER=root ; COMMAND=/usr/bin/nano /etc/polkit-1/localauthority/50-local.d/org.freedesktop.NetworkManager.pkla
Jul 28 11:24:28 localhost sudo: pam_unix(sudo:session): session opened for user root by felix85(uid=0)
Jul 28 11:24:34 localhost sudo: pam_unix(sudo:session): session closed for user root
Jul 28 11:24:36 localhost sudo: felix85 : TTY=pts/0 ; PWD=/home/felix85 ; USER=root ; COMMAND=/usr/bin/nano /etc/polkit-1/localauthority/50-local.d/org.freedesktop.NetworkManager.pkla
Jul 28 11:24:36 localhost sudo: pam_unix(sudo:session): session opened for user root by felix85(uid=0)
Jul 28 11:25:58 localhost sudo: pam_unix(sudo:session): session closed for user root
Jul 28 11:26:11 localhost slim: pam_unix(slim:session): session closed for user felix85
Jul 28 11:26:11 localhost polkitd(authority=local): Unregistered Authentication Agent for unix-session:/org/freedesktop/ConsoleKit/Session2 (system bus name :1.30, object path /org/freedesktop/PolicyKit1/AuthenticationAgent, locale en_US.UTF-8) (disconnected from bus)
Jul 28 11:26:23 localhost sshd[442]: Received signal 15; terminating.
Jul 28 03:25:04 localhost sshd[444]: Server listening on 0.0.0.0 port 22.
Jul 28 03:25:04 localhost sshd[444]: Server listening on :: port 22.
Jul 28 03:25:16 localhost slim: pam_unix(slim:session): session opened for user felix85 by (uid=0)
Jul 28 03:25:17 localhost gnome-keyring-daemon[501]: couldn't set environment variable in session: The name org.gnome.SessionManager was not provided by any .service files
Jul 28 03:25:17 localhost gnome-keyring-daemon[501]: couldn't set environment variable in session: The name org.gnome.SessionManager was not provided by any .service files
Jul 28 03:25:17 localhost gnome-keyring-daemon[501]: couldn't set environment variable in session: The name org.gnome.SessionManager was not provided by any .service files
Jul 28 03:25:18 localhost gnome-keyring-daemon[501]: The GPG agent was already initialized
Jul 28 03:25:18 localhost gnome-keyring-daemon[501]: The Secret Service was already initialized
Jul 28 03:25:18 localhost gnome-keyring-daemon[501]: The PKCS#11 component was already initialized
Jul 28 03:25:18 localhost gnome-keyring-daemon[501]: The SSH agent was already initialized
Jul 28 03:25:33 localhost dbus[338]: [system] Rejected send message, 2 matched rules; type="method_call", sender=":1.27" (uid=1000 pid=708 comm="/usr/bin/gnome-shell ") interface="org.freedesktop.DBus.Properties" member="GetAll" error name="(unset)" requested_reply="0" destination=":1.5" (uid=0 pid=504 comm="/usr/sbin/console-kit-daemon --no-daemon ")
Jul 28 03:25:34 localhost polkitd(authority=local): Registered Authentication Agent for unix-session:/org/freedesktop/ConsoleKit/Session2 (system bus name :1.27 [/usr/bin/gnome-shell], object path /org/freedesktop/PolicyKit1/AuthenticationAgent, locale en_US.UTF-8)
Jul 28 03:25:35 localhost dbus[338]: [system] Rejected send message, 2 matched rules; type="method_call", sender=":1.27" (uid=1000 pid=708 comm="/usr/bin/gnome-shell ") interface="org.freedesktop.DBus.Properties" member="GetAll" error name="(unset)" requested_reply="0" destination=":1.5" (uid=0 pid=504 comm="/usr/sbin/console-kit-daemon --no-daemon ")
Jul 28 03:25:35 localhost dbus[338]: [system] Rejected send message, 2 matched rules; type="method_call", sender=":1.27" (uid=1000 pid=708 comm="/usr/bin/gnome-shell ") interface="org.freedesktop.DBus.Properties" member="GetAll" error name="(unset)" requested_reply="0" destination=":1.5" (uid=0 pid=504 comm="/usr/sbin/console-kit-daemon --no-daemon ")
Jul 28 03:25:35 localhost dbus[338]: [system] Rejected send message, 2 matched rules; type="method_call", sender=":1.27" (uid=1000 pid=708 comm="/usr/bin/gnome-shell ") interface="org.freedesktop.DBus.Properties" member="GetAll" error name="(unset)" requested_reply="0" destination=":1.5" (uid=0 pid=504 comm="/usr/sbin/console-kit-daemon --no-daemon ")
Jul 28 03:25:35 localhost dbus[338]: [system] Rejected send message, 2 matched rules; type="method_call", sender=":1.27" (uid=1000 pid=708 comm="/usr/bin/gnome-shell ") interface="org.freedesktop.DBus.Properties" member="GetAll" error name="(unset)" requested_reply="0" destination=":1.5" (uid=0 pid=504 comm="/usr/sbin/console-kit-daemon --no-daemon ")
Jul 28 03:25:35 localhost dbus[338]: [system] Rejected send message, 2 matched rules; type="method_call", sender=":1.27" (uid=1000 pid=708 comm="/usr/bin/gnome-shell ") interface="org.freedesktop.DBus.Properties" member="GetAll" error name="(unset)" requested_reply="0" destination=":1.5" (uid=0 pid=504 comm="/usr/sbin/console-kit-daemon --no-daemon ")
Jul 28 03:25:35 localhost dbus[338]: [system] Rejected send message, 2 matched rules; type="method_call", sender=":1.27" (uid=1000 pid=708 comm="/usr/bin/gnome-shell ") interface="org.freedesktop.DBus.Properties" member="GetAll" error name="(unset)" requested_reply="0" destination=":1.5" (uid=0 pid=504 comm="/usr/sbin/console-kit-daemon --no-daemon ")
Jul 28 03:28:06 localhost sudo: felix85 : TTY=pts/0 ; PWD=/home/felix85 ; USER=root ; COMMAND=/usr/sbin/ip address
Jul 28 03:28:06 localhost sudo: pam_unix(sudo:session): session opened for user root by felix85(uid=0)
Jul 28 03:28:06 localhost sudo: pam_unix(sudo:session): session closed for user root
Jul 28 03:36:38 localhost sudo: felix85 : TTY=pts/0 ; PWD=/home/felix85 ; USER=root ; COMMAND=/usr/bin/pacman -Ss polkit
Jul 28 03:36:38 localhost sudo: pam_unix(sudo:session): session opened for user root by felix85(uid=0)
Jul 28 03:36:39 localhost sudo: pam_unix(sudo:session): session closed for user root
Jul 28 03:43:36 localhost sudo: felix85 : TTY=pts/0 ; PWD=/home/felix85 ; USER=root ; COMMAND=/usr/bin/nano /etc/pam.d/login
Jul 28 03:43:36 localhost sudo: pam_unix(sudo:session): session opened for user root by felix85(uid=0)
Jul 28 03:44:38 localhost sudo: pam_unix(sudo:session): session closed for user root
Jul 28 03:44:48 localhost slim: pam_unix(slim:session): session closed for user felix85
Jul 28 03:44:48 localhost polkitd(authority=local): Unregistered Authentication Agent for unix-session:/org/freedesktop/ConsoleKit/Session2 (system bus name :1.27, object path /org/freedesktop/PolicyKit1/AuthenticationAgent, locale en_US.UTF-8) (disconnected from bus)
Jul 28 03:45:01 localhost sshd[444]: Received signal 15; terminating.
Jul 28 03:45:36 localhost sshd[464]: Server listening on 0.0.0.0 port 22.
Jul 28 03:45:36 localhost sshd[464]: Server listening on :: port 22.
Jul 28 03:45:47 localhost slim: pam_unix(slim:session): session opened for user felix85 by (uid=0)
Jul 28 03:45:48 localhost gnome-keyring-daemon[517]: couldn't set environment variable in session: The name org.gnome.SessionManager was not provided by any .service files
Jul 28 03:45:48 localhost gnome-keyring-daemon[517]: couldn't set environment variable in session: The name org.gnome.SessionManager was not provided by any .service files
Jul 28 03:45:48 localhost gnome-keyring-daemon[517]: couldn't set environment variable in session: The name org.gnome.SessionManager was not provided by any .service files
Jul 28 03:45:49 localhost gnome-keyring-daemon[517]: The GPG agent was already initialized
Jul 28 03:45:49 localhost gnome-keyring-daemon[517]: The Secret Service was already initialized
Jul 28 03:45:49 localhost gnome-keyring-daemon[517]: The PKCS#11 component was already initialized
Jul 28 03:45:49 localhost gnome-keyring-daemon[517]: The SSH agent was already initialized
Jul 28 03:46:05 localhost dbus[357]: [system] Rejected send message, 2 matched rules; type="method_call", sender=":1.27" (uid=1000 pid=723 comm="/usr/bin/gnome-shell ") interface="org.freedesktop.DBus.Properties" member="GetAll" error name="(unset)" requested_reply="0" destination=":1.5" (uid=0 pid=520 comm="/usr/sbin/console-kit-daemon --no-daemon ")
Jul 28 03:46:05 localhost polkitd(authority=local): Registered Authentication Agent for unix-session:/org/freedesktop/ConsoleKit/Session2 (system bus name :1.27 [/usr/bin/gnome-shell], object path /org/freedesktop/PolicyKit1/AuthenticationAgent, locale en_US.UTF-8)
Jul 28 03:46:06 localhost dbus[357]: [system] Rejected send message, 2 matched rules; type="method_call", sender=":1.27" (uid=1000 pid=723 comm="/usr/bin/gnome-shell ") interface="org.freedesktop.DBus.Properties" member="GetAll" error name="(unset)" requested_reply="0" destination=":1.5" (uid=0 pid=520 comm="/usr/sbin/console-kit-daemon --no-daemon ")
Jul 28 03:46:06 localhost dbus[357]: [system] Rejected send message, 2 matched rules; type="method_call", sender=":1.27" (uid=1000 pid=723 comm="/usr/bin/gnome-shell ") interface="org.freedesktop.DBus.Properties" member="GetAll" error name="(unset)" requested_reply="0" destination=":1.5" (uid=0 pid=520 comm="/usr/sbin/console-kit-daemon --no-daemon ")
Jul 28 03:46:06 localhost dbus[357]: [system] Rejected send message, 2 matched rules; type="method_call", sender=":1.27" (uid=1000 pid=723 comm="/usr/bin/gnome-shell ") interface="org.freedesktop.DBus.Properties" member="GetAll" error name="(unset)" requested_reply="0" destination=":1.5" (uid=0 pid=520 comm="/usr/sbin/console-kit-daemon --no-daemon ")
Jul 28 03:46:06 localhost dbus[357]: [system] Rejected send message, 2 matched rules; type="method_call", sender=":1.27" (uid=1000 pid=723 comm="/usr/bin/gnome-shell ") interface="org.freedesktop.DBus.Properties" member="GetAll" error name="(unset)" requested_reply="0" destination=":1.5" (uid=0 pid=520 comm="/usr/sbin/console-kit-daemon --no-daemon ")
Jul 28 03:46:06 localhost dbus[357]: [system] Rejected send message, 2 matched rules; type="method_call", sender=":1.27" (uid=1000 pid=723 comm="/usr/bin/gnome-shell ") interface="org.freedesktop.DBus.Properties" member="GetAll" error name="(unset)" requested_reply="0" destination=":1.5" (uid=0 pid=520 comm="/usr/sbin/console-kit-daemon --no-daemon ")
Jul 28 03:46:06 localhost dbus[357]: [system] Rejected send message, 2 matched rules; type="method_call", sender=":1.27" (uid=1000 pid=723 comm="/usr/bin/gnome-shell ") interface="org.freedesktop.DBus.Properties" member="GetAll" error name="(unset)" requested_reply="0" destination=":1.5" (uid=0 pid=520 comm="/usr/sbin/console-kit-daemon --no-daemon ")
Jul 28 03:47:27 localhost sudo: felix85 : TTY=pts/0 ; PWD=/home/felix85 ; USER=root ; COMMAND=/usr/bin/pacman -Ss hal
Jul 28 03:47:27 localhost sudo: pam_unix(sudo:session): session opened for user root by felix85(uid=0)
Jul 28 03:47:28 localhost sudo: pam_unix(sudo:session): session closed for user root
Jul 28 03:47:52 localhost sudo: felix85 : TTY=pts/0 ; PWD=/home/felix85 ; USER=root ; COMMAND=/usr/bin/nano /etc/rc.conf
Jul 28 03:47:52 localhost sudo: pam_unix(sudo:session): session opened for user root by felix85(uid=0)
Jul 28 03:48:29 localhost sudo: pam_unix(sudo:session): session closed for user root
Jul 28 03:51:08 localhost sudo: felix85 : TTY=pts/0 ; PWD=/home/felix85 ; USER=root ; COMMAND=/usr/bin/nano /etc/rc.conf
Jul 28 03:51:08 localhost sudo: pam_unix(sudo:session): session opened for user root by felix85(uid=0)
Jul 28 03:51:17 localhost sudo: pam_unix(sudo:session): session closed for user root
Jul 28 03:51:35 localhost sudo: felix85 : TTY=pts/0 ; PWD=/home/felix85 ; USER=root ; COMMAND=/usr/bin/nano /etc/polkit-1/localauthority.conf.d/50-localauthority.conf
Jul 28 03:51:35 localhost sudo: pam_unix(sudo:session): session opened for user root by felix85(uid=0)
Jul 28 03:51:45 localhost sudo: pam_unix(sudo:session): session closed for user root
Jul 28 03:55:12 localhost gpasswd[843]: felix85 failed to add user felix85 to group dbus: Permission denied
Jul 28 03:55:18 localhost sudo: felix85 : TTY=pts/0 ; PWD=/home/felix85 ; USER=root ; COMMAND=/usr/bin/gpasswd -a felix85 dbus
Jul 28 03:55:18 localhost sudo: pam_unix(sudo:session): session opened for user root by felix85(uid=0)
Jul 28 03:55:18 localhost gpasswd[845]: user felix85 added by root to group dbus
Jul 28 03:55:18 localhost sudo: pam_unix(sudo:session): session closed for user root
Jul 28 03:55:29 localhost slim: pam_unix(slim:session): session closed for user felix85
Jul 28 03:55:29 localhost polkitd(authority=local): Unregistered Authentication Agent for unix-session:/org/freedesktop/ConsoleKit/Session2 (system bus name :1.27, object path /org/freedesktop/PolicyKit1/AuthenticationAgent, locale en_US.UTF-8) (disconnected from bus)
Jul 28 03:55:41 localhost sshd[464]: Received signal 15; terminating.
Jul 28 03:56:15 localhost sshd[430]: Server listening on 0.0.0.0 port 22.
Jul 28 03:56:15 localhost sshd[430]: Server listening on :: port 22.
Jul 28 03:56:25 localhost slim: pam_unix(slim:session): session opened for user felix85 by (uid=0)
Jul 28 03:56:26 localhost gnome-keyring-daemon[484]: couldn't set environment variable in session: The name org.gnome.SessionManager was not provided by any .service files
Jul 28 03:56:26 localhost gnome-keyring-daemon[484]: couldn't set environment variable in session: The name org.gnome.SessionManager was not provided by any .service files
Jul 28 03:56:26 localhost gnome-keyring-daemon[484]: couldn't set environment variable in session: The name org.gnome.SessionManager was not provided by any .service files
Jul 28 03:56:28 localhost gnome-keyring-daemon[484]: The GPG agent was already initialized
Jul 28 03:56:28 localhost gnome-keyring-daemon[484]: The Secret Service was already initialized
Jul 28 03:56:28 localhost gnome-keyring-daemon[484]: The PKCS#11 component was already initialized
Jul 28 03:56:28 localhost gnome-keyring-daemon[484]: The SSH agent was already initialized
Jul 28 03:56:43 localhost dbus[323]: [system] Rejected send message, 2 matched rules; type="method_call", sender=":1.27" (uid=1000 pid=690 comm="/usr/bin/gnome-shell ") interface="org.freedesktop.DBus.Properties" member="GetAll" error name="(unset)" requested_reply="0" destination=":1.5" (uid=0 pid=487 comm="/usr/sbin/console-kit-daemon --no-daemon ")
Jul 28 03:56:44 localhost polkitd(authority=local): Registered Authentication Agent for unix-session:/org/freedesktop/ConsoleKit/Session2 (system bus name :1.27 [/usr/bin/gnome-shell], object path /org/freedesktop/PolicyKit1/AuthenticationAgent, locale en_US.UTF-8)
Jul 28 03:56:45 localhost dbus[323]: [system] Rejected send message, 2 matched rules; type="method_call", sender=":1.27" (uid=1000 pid=690 comm="/usr/bin/gnome-shell ") interface="org.freedesktop.DBus.Properties" member="GetAll" error name="(unset)" requested_reply="0" destination=":1.5" (uid=0 pid=487 comm="/usr/sbin/console-kit-daemon --no-daI am posting this while being manually connected to my wireless router.
Here are the results of manually connecting to my wireless network.
First I replaced networkmanager with network in /etc/rc.conf under DAEMONS and rebooted.
Next I ran "ip link set wlan0 up"
iwlist wlan0 scan
wlan0 Scan completed :
Cell 01 - Address: 00:12:17:0C:11:FF
Channel:10
Frequency:2.457 GHz (Channel 10)
Quality=62/70 Signal level=-48 dBm
Encryption key:on
ESSID:"Sherwood"
Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 11 Mb/s; 18 Mb/s
24 Mb/s; 36 Mb/s; 54 Mb/s
Bit Rates:6 Mb/s; 9 Mb/s; 12 Mb/s; 48 Mb/s
Mode:Master
Extra:tsf=00000050a6d70bc4
Extra: Last beacon: 9910ms ago
IE: Unknown: 000853686572776F6F64
IE: Unknown: 010882848B962430486C
IE: Unknown: 03010A
IE: Unknown: 2A0100
IE: Unknown: 2F0100
IE: Unknown: 32040C121860
IE: Unknown: DD06001018020000
IE: WPA Version 1
Group Cipher : TKIP
Pairwise Ciphers (1) : TKIP
Authentication Suites (1) : PSK
ip addr
2: wlan0: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc mq state DOWN qlen 1000
link/ether 00:19:d2:c5:16:bb brd ff:ff:ff:ff:ff:ff
/etc/wpa_supplicant/wpa_supplicant.conf
network={
ssid="Sherwood"
proto=WPA
key_mgmt=WPA-PSK
pairwise=TKIP
group=TKIP
psk="<mykey>"
wpa_ptk_rekey=600
I used wpa_supplicant to connect using the configuration above
wpa_supplicant -B -Dwext -i wlan0 -c /etc/wpa_supplicant/wpa_supplicant.conf
ip addr
2: wlan0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP qlen 1000
link/ether 00:19:d2:c5:16:bb brd ff:ff:ff:ff:ff:ff
inet 192.168.0.3/24 brd 192.168.0.255 scope global wlan0
inet6 <ipv6 addr>/64 scope global dynamic
valid_lft 294sec preferred_lft 114sec
inet6 <ipv6 addr 2>/64 scope link
valid_lft forever preferred_lft forever
ping google.com
PING google.com (173.194.33.3) 56(84) bytes of data.
64 bytes from sea09s01-in-f3.1e100.net (173.194.33.3): icmp_req=1 ttl=56 time=26.6 ms
64 bytes from sea09s01-in-f3.1e100.net (173.194.33.3): icmp_req=2 ttl=56 time=26.8 ms
64 bytes from sea09s01-in-f3.1e100.net (173.194.33.3): icmp_req=3 ttl=56 time=26.4 ms
64 bytes from sea09s01-in-f3.1e100.net (173.194.33.3): icmp_req=4 ttl=56 time=26.4 ms
--- google.com ping statistics ---
4 packets transmitted, 4 received, 0% packet loss, time 3004ms
rtt min/avg/max/mdev = 26.468/26.620/26.886/0.259 ms
ping6 ipv6.google.com
PING ipv6.google.com(pz-in-x68.1e100.net) 56 data bytes
64 bytes from pz-in-x68.1e100.net: icmp_seq=1 ttl=55 time=95.3 ms
64 bytes from pz-in-x68.1e100.net: icmp_seq=2 ttl=55 time=41.0 ms
64 bytes from pz-in-x68.1e100.net: icmp_seq=3 ttl=55 time=44.3 ms
64 bytes from pz-in-x68.1e100.net: icmp_seq=4 ttl=55 time=34.6 ms
--- ipv6.google.com ping statistics ---
4 packets transmitted, 4 received, 0% packet loss, time 3003ms
rtt min/avg/max/mdev = 34.608/53.830/95.332/24.217 ms
So it does work without networkmanager. -
[SOLVED]I can't connect to wireless networks.
Hi all, i'm new in the world of Arch Linux but not on the Linux world.
I'm having problems with wireless networks, and i had read all what the wiki says and tried all but nothing worked. I wanna say that wired works perfect.
I think the problem comes from dhcpcd. Because in the begins the problem was that dhcpcd stuck on "Waiting for carrier", i read the wiki and seted the channel on auto but didnt work. Now i cant even connect to a wireless red.
iwconfig wlp2s0 essid "Name"
Nothing happens
Here are some of my list-unit-files:
$ systemctl list-unit-files
dhcpcd.service enabled
[email protected] enabled
[email protected] enabled
[email protected] disabled
netctl-sleep.service disabled
netctl.service disabled
[email protected] static
netctl@wlp2s0\x2dCandy.service enabled
NetworkManager-dispatcher.service enabled
NetworkManager-wait-online.service disabled
NetworkManager.service enabled
nscd.service disabled
[email protected] disabled
[email protected] disabled
wpa_supplicant.service disabled
[email protected] disabled
Here the --failed:
$ systemctl --failed
UNIT LOAD ACTIVE SUB DESCRIPTION
dhcpcd.service loaded failed failed dhcpcd on all interfaces
[email protected] loaded failed failed dhcpcd on enp7s0
[email protected] loaded failed failed dhcpcd on wlp2s0
[email protected] loaded failed failed Automatic wireless network co
[email protected]\x206283.service loaded failed failed Networking for netctl profile
My ip link:
$ ip link
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN mode DEFAULT
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
2: enp7s0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP mode DEFAULT qlen 1000
link/ether 70:71:bc:92:00:1f brd ff:ff:ff:ff:ff:ff
3: wlp2s0: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc mq state DOWN mode DEFAULT qlen 1000
link/ether 74:f0:6d:3d:ee:f4 brd ff:ff:ff:ff:ff:ff
What aditional info do u need?
Thanx for all guys, i have days trying to solve this problem.
Last edited by Niemand (2013-10-13 18:03:45)ewaller wrote:Niemand,
Yes that is what I was working toward.
I am worried about one thing, however. I note that you are using an Android phone as your AP. Have you done that successfully with other machines? The reason I ask is some carriers here in the states (*cough*Verizon*cough*) make it as difficult as possible to tether their phones. I know that on my phone, I had to turn on NAT forwarding in the phone to make it work. That required I root the phone.
Yes it works perfect with anothers PCs and with this PC on Windows too. I tried on anothers Networks, D-Link Router, Micronet and others. I tried in a lot of connections but it doesn't work.
DarkCerberus wrote:You should try it with just NetworkManager.service or just netctl.service without the @ symbol - with my knowledge - dhcpcd, netctl and NetworkManager all conflicts together, try disabling the other network services like dhcpcd, netctl, NetworkManager etc. And just use one of them and see what the end result is.
I could't disable the following services:
[email protected]
[email protected]
I tried with:
- sudo systemctl disable [email protected]
- sudo systemctl disable [email protected]
- sudo netctl-auto disable-all
Then, i restarted and try again with:
$sudo iwlist wlan0 scan
$sudo iwconfig wlan0 essid "MOTO..."
$sudo dhcpcd wlan0
$ sudo dhcpcd wlan0
version 6.0.5 starting
wlan0: soliciting an IPv6 router
wlan0: soliciting a DHCP lease
wlan0: offered 192.168.43.17 from 192.168.43.1
wlan0: leased 192.168.43.17 for 43200 seconds
wlan0: adding host route to 192.168.43.17 via 127.0.0.1
wlan0: adding route to 192.168.43.0/24
wlan0: adding default route via 192.168.43.1
forked to background, child pid 700
IT'S WORKS!!
The status of the services are:
$ systemctl list-unit-files
dhcpcd.service disabled
[email protected] enabled
[email protected] enabled
[email protected] disabled
netctl-sleep.service disabled
netctl.service disabled
[email protected] static
netctl@wlp2s0\x2dCandy.service disabled
NetworkManager-dispatcher.service disabled
NetworkManager-wait-online.service disabled
NetworkManager.service disabled
nscd.service disabled
[email protected] disabled
[email protected] disabled
wpa_supplicant.service disabled
[email protected] disabled
Now my ip link is:
$ ip link
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN mode DEFAULT
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
2: eth0: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc pfifo_fast state DOWN mode DEFAULT qlen 1000
link/ether 70:71:bc:92:00:1f brd ff:ff:ff:ff:ff:ff
3: wlan0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP mode DEFAULT qlen 1000
link/ether 74:f0:6d:3d:ee:f4 brd ff:ff:ff:ff:ff:ff
And my iwconfig:
$ iwconfig
eth0 no wireless extensions.
lo no wireless extensions.
wlan0 IEEE 802.11bgn ESSID:"MOTOROLA RAZR i 6283"
Mode:Managed Frequency:2.437 GHz Access Point: E0:75:7D:D0:56:98
Bit Rate=72.2 Mb/s Tx-Power=20 dBm
Retry long limit:7 RTS thr:off Fragment thr:off
Power Management:off
Link Quality=70/70 Signal level=-35 dBm
Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0
Tx excessive retries:1 Invalid misc:22 Missed beacon:0
In the begins i didnt have Ethernet but then i turn on manually eth0 and boths works perfect.
Thanks a lot for all.
[SOLVED] -
i just had a new hard drive installed. After loading everything back on my computer from external drive, i came to the "select wireless network screen. I've misplaced the WEP password for my internet. Is there anyway to find it on another computer?
Maybe. What kind of other computer are you talking about? What operating system is it running? What kind of wireless router are you using?
Your best bet may be to just reset the router and set it up again.
Just so you know, WEP is a very old security system for wireless and is considered insecure. If you have it available, use WPA2. -
Not able to connect to wireless network using WEP 128 bit hex password
I'm using a 128 bit hex WEP password on a Belkin wireless router.
My ascii passphrase is 13 characters.
I tried using the hex password generated by the Belkin router, as well as the hex equivalent of my ascii passphrase. Every time, I am told that either "there was an error connecting to the network" or the "password is incorrect" message.
I'm using channel 7, but have also tried with channel 11.
I tried using a $ sign in front of the WEP hex password. The $ does not work with Open Internet Connect or the Airport menubar.
I can connect if I don't use any encryption on the wireless network, and also through the Ethernet cable.
I have an iBook which connects fine to the wireless network.
So why doesn't the iMac work the same way ?The security difference between NO encryption and any form of WEP is about 2 minutes or less for somebody looking to get in... besides having WEP enabled makes you look like an easy target since you think it'll stop anything!
Either leave it off, making Hackers think at least 3 minutes about WHY, or use/setup WPA of one form or another! -
IPhone not connecting to WEP 128 Wireless network after 1.0.2 upgrade
Hello all,
I have the iphone since the last week. I was pretty happy with it until I upgraded the iphone to version 1.0.2.
From that very moment, the WEP Hex/ASCII Key option dissapeared when setting a connection to a wireless network. Mine was working with 1.0.0 and now it does not work.
I am Telecom engineer, and I pretty sure everything is correct. Mi 128 wep key is 13 characters long and (of course) 26 HEX long.
I have tried putting " before and after the ASCII key and also entering a $ sign before the HEX key.
I have also disabled the Auto caps, just in case.
After all this testing and a quick look at google, it seems that there are more people with the same problem.
Could anyone say to me if there is any other way? Or if apple is gonna release a new version with this issue fixed?
I am quite dissapointed.
BTW: I have tried all the stuff of reseting the router and "forget setting", etc.
BTW2: To switch to WPA may be an option in my network by it is no way a solution as the majority of the public AP use WEP....I am using a Linksys BEFW11S4 and I've tried to make the WEP key work on and off for the last 2 months while tapping into other people's wifi to get by without it.
Previously, when I chose someone else's secured network from the 'available networks' list, it would open a window and ask for password. But if I selected my own secured network it wouldn't and would just say "unable to join XYZ network".
Here is what I did tonight and I'm not sure which step did the trick, but it's worth a try:
1 - On the router, I went into the Password tab and entered a password. Previously I hadn't been using any.
2 - On the iPhone, I clicked on the little arrow next to my network's name. In the following screen entered the DNS address of my router (on Linksys the address is found on the Status tab).
I now have it connected to my network. I disconnected and reconnected again without having to enter the password, so either it's saving the password someplace or it's the DNS address that did the trick. The iPhone MAC Address shows up in the DHCP Active IP Table of the router and the router is still WEP protected.
I hope this wasn't too confusing. If you reply, please tell me how you feel about the $200 price drop today! -
Mixture of WEP and WPA on wireless network
I have a WRT54G and a cable modem. The router is configured to use WPA. I have many personal wireless devices (print servers, computers, access points, etc.) on my network. All are configured to use WPA. My wife and I just got company-issued laptops from our employer that have software that does not support WPA (we can't change the software). The laptops only support WEP. Is there a way to run a mixture of WEP and WPA on a wireless network? If I have to buy an additional router, that is OK. I'm looking for a solution that will allow me to run both WPA and WEP over the same internet connection.
Would MAC filtering on my current router be a possible solution?It is not possible to use WEP & WPA at a same time in a router .....
But you can enable the MAC flitering on the router for all wireless devices ..... let me know if it works .... -
Adding Airport Express to an existing Windows WEP enabled wireless network
I have can't find anything to help me add my new Airport Express to my existing WEP network. All I want is to use to play my Itunes through the sitting room stereo. I've upgraded the firmware on my Netgear 802.11b wireless access point so I can have a 13 digit WEP password. I've installed the latest install software from the apple website for the express box.
I can access the express box fine on its own but not add it to the existing network. Now the only thing that works is the apple connection! My old wireless network has stopped working. I tried the same at my office yesterday and the only way to resolve the situation was to uninstall all the Apple software and then my Wireless network was able to work again. I'm pulling my hair out here and getting in to trouble with the rest of the family because it is taking so much time up!
Someone mentioned somewhere some new firmware - I can only find one for MAcs not PCs - I don't have any Macs on my network.
Please help.
THANKSMake sure you have installed at least Airport 4.1 on your PC:
http://www.apple.com/support/downloads/airport41forwindows.html
Most Netgear wireless routes will tell you the hex equivalent of the plain text WEP password you enter into it - and this is found using the same web browser based process you use to configure the router. This information cannot be found by any other means (like "pinging" the router's IP address). If you can get the WEP key in this manner, configure the Airport Express with the same WEP key *while it is still cabled to the router*.
The alternative is to come up with a 26-digit hex format WEP key of your own choosing. You can then wirelessly access the Airport Express and enter that WEP key on it first, followed by doing the same on the router second. -
[solved] Wireless network issues after installing gnome3
After installing gnome 3 I can't connect to my wireless network any more. I start gnome using 'xinit gnome-session' after loggin in at a command line. Here are some relavent ouptuts:
$ ifconfig
eth0 Link encap:Ethernet HWaddr 00:25:4B:8D:B7:07
inet6 addr: fe80::225:4bff:fe8d:b707/64 Scope:Link
UP BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)
Interrupt:10
eth1 Link encap:Ethernet HWaddr 00:25:4B:BE:74:BC
UP BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)
Interrupt:20 Base address:0x6000
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:32 errors:0 dropped:0 overruns:0 frame:0
TX packets:32 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:1920 (1.8 Kb) TX bytes:1920 (1.8 Kb)
$ iwconfig
lo no wireless extensions.
eth0 IEEE 802.11 Nickname:""
Access Point: Not-Associated
Link Quality:5 Signal level:0 Noise level:234
Rx invalid nwid:0 invalid crypt:0 invalid misc:0
eth1 no wireless extensions.
Trying to connect to a network through gnome-control-center:
$ sudo gnome-control-center
** (gnome-control-center:6172): WARNING **: Error in getting active connection 'Vpn' property: (19) Method "Get" with signature "ss" on interface "org.freedesktop.DBus.Properties" doesn't exist
** (gnome-control-center:6172): WARNING **: _nm_object_array_demarshal: couldn't create object for /org/freedesktop/NetworkManager/ActiveConnection/4
** (gnome-control-center:6172): WARNING **: Error in getting active connection 'Vpn' property: (19) Method "Get" with signature "ss" on interface "org.freedesktop.DBus.Properties" doesn't exist
** (gnome-control-center:6172): WARNING **: _nm_object_array_demarshal: couldn't create object for /org/freedesktop/NetworkManager/ActiveConnect
xterm output when trying to connect through the network applet:
Window manager warning: Log level 16: Device activation failed: (32) Insufficient privileges
Last edited by dave1022 (2011-05-14 17:14:12)iskandr wrote:
Hello,
I'm having problems with my wireless network connections, too. I did a fresh arch install with gnome3 some days ago to avoid any issues when upgrading, but i just can't access any wireless networks now. Everything else works like a charm, though. I followed the usual steps to set up my network/wifi with all the required modules and packages (broadcom-wl from the AUR, etc.) but it doesn't work like it did with gnome2 and xfce4.
My iwconfig/ifconfig output looks like dave1022's. Don't know if this is of any help...
The nm-applet in the gnome3 "panel" actually lists nearby wireless networks, but once I click on one of them, gnome asks me for authentification with my root password (user password does not work). I don't think it should be this way. If I enter my root password here, nothing happens whenever I click on the concerned network to connect to it. I deleted the /etc/NetworkManager/system-connections/<SSID> file to reset the authentification process.
I tried to consult the gnome3 pages in the wiki, but couldn't find any valueable hints either...does anyone have any idea what I might have done wrong or forgotten?
It's exactly the same for me and it's driving me nuts. I'm using iwl3945
[EDIT]
Well... actually installing the applet solved it for me. Is the applet actually needed for Gnome 3 or is a workaround?
Last edited by Slurp (2011-05-14 17:11:19) -
[Solved]All wireless networks have stopped working
Connecting to wireless networks that i have previously connected to times out, both with network manager, and iwconfig.
I have tried on two networks i have previously connected to and both time out.
What is interesting is that i am able to connect if i set a static ip, but i cannot reach any addresses, not even 192.168.1.1
SOLVED:
Issue was determined to be the ath9k module, fixed it by running:
modprobe ath9k nohwcrypt=1
Last edited by seniorsassycat (2012-01-28 23:14:25)Some news:
Networks without security works, right now i am using my tethering features for my Android phone.
I am already checking for last packages, un til now: uninstall usb_modeswitch no offers a solution (was one of the last packages with network relation), looking for more
ip addr
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 16436 qdisc noqueue state UNKNOWN
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever
2: eth0: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc mq state DOWN qlen 1000
link/ether 1c:75:08:21:dd:4d brd ff:ff:ff:ff:ff:ff
3: wlan0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP qlen 1000
link/ether 1c:65:9d:69:fa:c1 brd ff:ff:ff:ff:ff:ff
inet 192.168.43.218/24 brd 192.168.43.255 scope global wlan0
inet6 fe80::1e65:9dff:fe69:fac1/64 scope link
valid_lft forever preferred_lft forever
iwconfig
lo no wireless extensions.
wlan0 IEEE 802.11bgn ESSID:"AndroidAP"
Mode:Managed Frequency:2.412 GHz Access Point: E0:2A:82:E6:29:06
Bit Rate=54 Mb/s Tx-Power=13 dBm
Retry long limit:7 RTS thr:off Fragment thr:off
Power Management:off
Link Quality=62/70 Signal level=-48 dBm
Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0
Tx excessive retries:27 Invalid misc:325 Missed beacon:0
eth0 no wireless extensions.
iwlist scan
lo Interface doesn't support scanning.
wlan0 Scan completed :
Cell 01 - Address: 00:25:86:C5:15:B
Channel:6
Frequency:2.437 GHz (Chan
Quality=50/70 Signal lev
Encryption key:on
ESSID:"4714046"
Bit Rates:1 Mb/s; 2 Mb/s;
12 Mb/s; 24 Mb/
Bit Rates:9 Mb/s; 18 Mb/s
Mode:Master
Extra:tsf=00000000ae9f498
Extra: Last beacon: 400ms
IE: Unknown: 000734373134
IE: Unknown: 010882848B96
IE: Unknown: 030106
IE: Unknown: 2A0104
IE: Unknown: 32041224606C
Cell 02 - Address: 00:25:12:F5:64:F
Channel:6
Frequency:2.437 GHz (Chan
Quality=51/70 Signal lev
Encryption key:on
ESSID:"4714046"
Bit Rates:1 Mb/s; 2 Mb/s;
9 Mb/s; 12 Mb/s
Bit Rates:24 Mb/s; 36 Mb/
Mode:Master
Extra:tsf=00000037ef592b7
Extra: Last beacon: 1036m
IE: Unknown: 000734373134
IE: Unknown: 010882848B96
IE: Unknown: 030106
IE: Unknown: 2A0100
IE: Unknown: 32043048606C
IE: Unknown: DD180050F2020101000003A4000027A4000042435E0062322F00
IE: Unknown: DD950050F204104A0001101044000102103B0001031047001063041253101920061228002512F564FD1021001B5265616C74656B2053656D69636F6E647563746F7220436F72702E1023000752544C383637311024000D45562D323030362D30372D32371042000F3132333435363738393031323334371054000800060050F20400011011000A5A585631302057333030100800020086
Cell 03 - Address: E0:2A:82:E6:29:06
Channel:1
Frequency:2.412 GHz (Channel 1)
Quality=63/70 Signal level=-47 dBm
Encryption key:off
ESSID:"AndroidAP"
Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 6 Mb/s; 9 Mb/s
11 Mb/s; 12 Mb/s; 18 Mb/s
Bit Rates:24 Mb/s; 36 Mb/s; 48 Mb/s; 54 Mb/s
Mode:Master
Extra:tsf=0000000035539181
Extra: Last beacon: 1673ms ago
IE: Unknown: 0009416E64726F69644150
IE: Unknown: 010882848B0C12961824
IE: Unknown: 030101
IE: Unknown: 0706555320010B1B
IE: Unknown: 2A0100
IE: Unknown: 32043048606C
eth0 Interface doesn't support scanning. -
I am tyrying to link our xbox and PC int oour wireless network. I am using an apple airport express and it is asking for my WEP Key. Where do I find it?
You should be able to setup WPA / WPA2 access, rather than WEP - which is old an less secure. (Unless your devices are too old for WPA??)
Try this link: http://spotlight.getnetwise.org/wireless/wifitips/apple/apple-wpa.php
**Edit
Airport does support the WEP protocol.
Apple Docs: http://docs.info.apple.com/article.html?path=Airport/5.0/en/ap2084.html -
Wireless network setup problems [SOLVED]
Hi!
I'm trying to set up the wireless network here, and have been for the last couple of days. I'm following the Arch Linux Wireless Setup guide http://wiki.archlinux.org/index.php/Wireless_Setup and I've come to the point where I should have a connection, but I don't. I can't get an IP from dhcpcd and setting it to static doesn't help me. Wired network with dhcp works fine, but I can't connect to the router on 192.168.1.1 as stated by my ISP or any other address, I shouldn't have to as the essid and key seems to work but it's suspicious.
Be advised: This is the first time I'm in contact with wireless networking, I've been using wired since the dawn of time.
Running Arch i686 on a Compaq CQ60 laptop
Router is a Xavi 5258
These are the steps I've made:
# lspci
07:00.0 Ethernet controller: Atheros Communications Inc. AR242x 802.11abg Wireless PCI Express Adapter (rev 01)
// After installing madwifi:
# modprobe ath5k
// It's down from the start so:
# ifconfig wlan0 up
// Set up essid and key as stated by my ISP
# iwconfig wlan0 essid "B2_private_AF" key s:B2_private_AF
// Check for access points:
# iwlist wlan0 scan
wlan0 Scan completed :
Cell 01 - Address: 00:01:38:A6:5A:B0
Channel:11
Frequency:2.462 GHz (Channel 11)
Quality=58/70 Signal level=-52 dBm
Encryption key:on
ESSID:"B2_private_AF"
Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 11 Mb/s; 22 Mb/s
Bit Rates:6 Mb/s; 9 Mb/s; 12 Mb/s; 18 Mb/s; 24 Mb/s
36 Mb/s; 48 Mb/s; 54 Mb/s
Mode:Master
Extra:tsf=00000008a1f48854
Extra: Last beacon: 40ms ago
IE: Unknown: 000D42325F707269766174655F4146
IE: Unknown: 010582848B962C
IE: Unknown: 03010B
IE: Unknown: 2A0100
IE: Unknown: 32080C1218243048606C
// The setup so far:
# ifconfig wlan0
wlan0 Link encap:Ethernet HWaddr 00:24:2C:5E:41:EA
inet6 addr: fe80::224:2cff:fe5e:41ea/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:6 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 b) TX bytes:576 (576.0 b)
# iwconfig wlan0
wlan0 IEEE 802.11bg ESSID:"B2_private_AF"
Mode:Managed Frequency:2.462 GHz Access Point: 00:01:38:A6:5A:B0
Bit Rate=1 Mb/s Tx-Power=27 dBm
Retry min limit:7 RTS thr:off Fragment thr:off
Encryption key:4232-5F70-7269-7661-7465-5F41-46 Security mode:open
Power Management:off
Link Quality=55/70 Signal level=-55 dBm Noise level=-99 dBm
Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0
Tx excessive retries:0 Invalid misc:0 Missed beacon:0
// Alright! Let's get that IP then!
# dhcpcd wlan0
dhcpcd: version 5.0.4 starting
dhcpcd: wlan0: broadcasting for a lease
dhcpcd: timed out
// Very well then, let's set it up static style
# ifconfig wlan0 192.168.1.2
# route add default gw 192.168.1.1
// This results in nothing other than breaking all connections until I shut down wlan0.
I have some thoughts:
Is the key right? How do you know if it's wrong?
Why can't I connect to the router on any of the standard IP:s nor the one given to me by my ISP? Hardware error?
Is my eth0 dhcp connection in some way conflicting? I've tried the whole set up from a fresh boot with the wire disconnected.
Have I confused something in the stage of installing and modprobing madwifi -> ath5k? Seems like the card is supported but I don't know how far into the set up process you can go with an unsupported card.
Heh-heh, that's my post, sorry for the length of it but I don't want to leave something out that could've been useful in troubleshooting.
Thanks in advance for any help, be it simple pointers or complete walkthroughs.
Edit: There was something, somewhere about country codes, but it said it's probably not an issue. Could it cause any trouble? I live in Sweden.
Last edited by spektre (2009-07-04 20:48:58)I solved it!
I had to change my eth0's IP to 192.168.1.2 before I could access the modem!
The key was not at all the one my ISP specified, it was a 10-digit number. NICE.
After I set wlan0 up with that key dhcpcd worked flawlessly and I'm writing this post through my wireless network!
Now, how do I mark the thread as solved?
Maybe you are looking for
-
How can we disable the 'Improvement Program' from all the apps in TCS5?
How can we disable the 'Improvement Program' from all the apps in TCS5, so that the end users are not able to see the option in the help menu? We have tried changing the value of bUsageMeasurement (HKLM\SOFTWARE\Policies\Adobe\(product name)\(version
-
How to refresh a local file in the Reporting Studio?
Hello, I need to refresh a few local files in the Reporting Studio via script, but obviously command ActiveDocument.Sections["Sectionname"].Process() does not work, since it's not a query. What else could I use? Many thanks for any answer.
-
Visual Studio 2012 MFC C++ Win32 Compiled Application wouldn't run on Windows XP... FIXED!
Converted a large Visual Studio 2005 MFC C++ Win32 Application to Visual Studio 2012. The compiled Win32 Application worked fine in Windows 7 and Windows 8 but not Windows XP. Found these 2 links which were very helpful on fixing the issue. http://bl
-
My serlvet (hosted on www.mycgiserver.com) is supposed to output an html page that includes images but the images won't display. Any ideas?
-
Question related to connection using SCAN listeners
Hi All, We have 2 Sets of 11gr2 RAC servers like below.Application (using Oracle client) is connecting to the Server A&B all the time using SCAN IP's. Server A,Server B --> Primary Database (RAC Instances) Server C,Server D --> Physical Standby Datab