[solved] Wireless network issues after installing gnome3

After installing gnome 3 I can't connect to my wireless network any more. I start gnome using 'xinit gnome-session' after loggin in at a command line. Here are some relavent ouptuts:
$ ifconfig
eth0 Link encap:Ethernet HWaddr 00:25:4B:8D:B7:07
inet6 addr: fe80::225:4bff:fe8d:b707/64 Scope:Link
UP BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)
Interrupt:10
eth1 Link encap:Ethernet HWaddr 00:25:4B:BE:74:BC
UP BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)
Interrupt:20 Base address:0x6000
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:32 errors:0 dropped:0 overruns:0 frame:0
TX packets:32 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:1920 (1.8 Kb) TX bytes:1920 (1.8 Kb)
$ iwconfig
lo no wireless extensions.
eth0 IEEE 802.11 Nickname:""
Access Point: Not-Associated
Link Quality:5 Signal level:0 Noise level:234
Rx invalid nwid:0 invalid crypt:0 invalid misc:0
eth1 no wireless extensions.
Trying to connect to a network through gnome-control-center:
$ sudo gnome-control-center
** (gnome-control-center:6172): WARNING **: Error in getting active connection 'Vpn' property: (19) Method "Get" with signature "ss" on interface "org.freedesktop.DBus.Properties" doesn't exist
** (gnome-control-center:6172): WARNING **: _nm_object_array_demarshal: couldn't create object for /org/freedesktop/NetworkManager/ActiveConnection/4
** (gnome-control-center:6172): WARNING **: Error in getting active connection 'Vpn' property: (19) Method "Get" with signature "ss" on interface "org.freedesktop.DBus.Properties" doesn't exist
** (gnome-control-center:6172): WARNING **: _nm_object_array_demarshal: couldn't create object for /org/freedesktop/NetworkManager/ActiveConnect
xterm output when trying to connect through the network applet:
Window manager warning: Log level 16: Device activation failed: (32) Insufficient privileges
Last edited by dave1022 (2011-05-14 17:14:12)

iskandr wrote:
Hello,
I'm having problems with my wireless network connections, too. I did a fresh arch install with gnome3 some days ago to avoid any issues when upgrading, but i just can't access any wireless networks now. Everything else works like a charm, though. I followed the usual steps to set up my network/wifi with all the required modules and packages (broadcom-wl from the AUR, etc.) but it doesn't work like it did with gnome2 and xfce4.
My iwconfig/ifconfig output looks like dave1022's. Don't know if this is of any help...
The nm-applet in the gnome3 "panel" actually lists nearby wireless networks, but once I click on one of them, gnome asks me for authentification with my root password (user password does not work). I don't think it should be this way. If I enter my root password here, nothing happens whenever I click on the concerned network to connect to it. I deleted the /etc/NetworkManager/system-connections/<SSID> file to reset the authentification process.
I tried to consult the gnome3 pages in the wiki, but couldn't find any valueable hints either...does anyone have any idea what I might have done wrong or forgotten?
It's exactly the same for me and it's driving me nuts. I'm using iwl3945
[EDIT]
Well... actually installing the applet solved it for me. Is the applet actually needed for Gnome 3 or is a workaround?
Last edited by Slurp (2011-05-14 17:11:19)

Similar Messages

  • WiFi-Network Issue After Installing Updates, When I turn my mac on from sleep. Help..

    I recently installed updates on my MacBook Pro Lion and after installing MacBook Pro WFI Firmware Updat 2.2 and Thunderbolt Software Update 1.0, when I put my mac on sleep and come back, my mac will not connect to my network automatically. I have to turn off WiFi and turn back on in order for me to connect again. I didnt have this issue before installing these updates. Can anyone help me with this? Is it a software issue or hardware issue with my mac?

    I'm very angry about this. This has been ongoing for quite a while, and the past several point updates (10.7.1 and 10.7.2 haven't fixed it.) I'm on 10.7.2 and still having this problem 100% of the time when I wake my 15" 2010 MacBook Pro from sleep by opening the lid. Even thought it's connected to the same network (Airport Express, fully updated) when I close and open it, WIFI does not reconnect, and I have to manually turn it off and on again before it will work.
    I'm not the only angry one about this though. Do a search on the Apple Communities forums for "macbook pro lion wifi sleep" to see many other users with the same problem.

  • Wireless printer issues after installing lion OS

    Since installing the Lion Os on 13th September 2011, I have experienced intermittent wireless printing problems.
    When you try to print the printer icon comes up with an error, and the message is 'the printer is not connected'. The printer is on and wiFi is lit up. Sometimes by cancelling the print job and then requesting it again clears the problem. When I access the printer in the settings pane it is there and showing idle with a green light, but when you try to print the connection goes.
    Sometimes I have to input the administrator password and then it will print. Other times that will not work and I have had to delete the printer and re install it. The problem still exists though.
    It exists on all user profiles on the iMac (4)

    I have the same problem. I have checked for drivers, and just a couple days ago an updated driver for my printer came through the Mac's Software Update, but it didn't fix the problem. I'm seeing a lot of people with this problem, with different routers and different printers since Lion came out, so I'm fairly certain it's a Lion problem. I hope someone comes up with an answer soon, or I might just break out my PC...

  • HP Officejet Pro 8620 (Wireless Network) will not install on Win8. 1

    Today I received my new HP Officejet 8620 PRO printer. I have setup Wireless Network access, and installed the Driver successfully on my Windows 7 Ultimate 64 Bit PC, and tried to do the same on my Acer Win8.1 Laptop. During the installation, it finds the Printer on the network at the correct IP Address (192.168.178.48) and goes as far as a dialog showing "Network Printer Installation" with a Green progress bar cycling but never progressing ... I have left it be for over 45 minutes, and have tried to cancel the installation, with the same problem. Now the setup is jammed, and cannot progress. Suggestions please!!! Not sure what more relevant information is required ... so I'm open to questions ... which I'll try and answer ... or (preferably) suggestions on how to fix this. Many Thanks for your anticipated support.  p.s. HP ... I find it ridiculous that I can buy a brand new printer and yet have to revert to Public Forums to beg help! (or pay an exhorbent extra fee to get telephone support)

    I would suggest cancelling the installation and then download the diagnostics at http://www.hp.com/go/tools.  The tools there may help diagnose system issues, if nothing is found I would suggest running the driver wizard. Depending on your country the warranty would typically be one year from date of purchase.  Likely if you were charged (or an attempt made to charge you) for support on a new printer you were not contacting HP.  Unfortunately an internet search for "HP Support" will turn up a number of locations that may pretend to be HP but are not.  The diagnosis there is typically "you have malware or a virus, we can fix that but it will cost $149" (or perhaps $349 for a lifetime).  I once gave one of these folks access to a dummy test machine, after an hour accessing my system and suggesting various fixes I made it clear that I would not be buying anything from them.  At this point they attempted to encrypt my system drive (after warning me that if I did not buy their product my system would likely be unusable).  Fortunately the system was set up to require an admin password to install programs or do "bad" things.... If you need to contact HP start at the link here: http://www.hp.com/contacthp/  

  • Issues after installing Classic on OS 10.4

    Background and System
    I have a Power Mac G3 350Mhz Rev 2 Blue and White, 512MB, 40GB, DVD ROM
    running 10.4.9 installed from Retail DVD. Firmware up to date. 2x 20 GB partitions formatted as Extended
    Prior to this issue OS X has been running well.
    Issue:
    After installing OS 9.2.1 to second partition OS X will now not boot up from DVD nor it's partition
    Solutions tried:
    I wanted to install a Classic environment so used a Retail OS 9.2.1 Bootable CD and did a full install to the second partition.
    After the install finished and the system restarted, set on the OS X (Partition1) for start up the system hangs right after the Apple "Chime". with no signal to video card
    Attempted to then boot from OS 10.4 DVD but this does not get detected when holding "c" down for boot up from CD option. This worked perfectly before.
    Have run OS 9.2.1 Disk Aid Verify and both partitions are ok. The system will boot from the 9.2.1 CD and partition but anything to do OS X now will not work. I also tried an Ubuntu 6.06 Live CD but this will not now boot either.
    Checked firmware and tried to re run firmware update and this advised my firmware was up to date.
    Any other suggestions?
    Thanks

    The only thing I can think of is that when you installed the 10.4.9 OS you didn't option to install OS 9 drivers.

  • Having issues after installing Essbase V9.3.1,configuring the SQL interface

    I am having issues after installing Essbase V9.3.1 and configuring the SQL interface. we are using UNIX/AIX box for our Essbase server and UDB DB2 9.1 SP6 as our SQL Interface.
    When tried to run an ESSCMD script to perform BUILDDIM operation on Essbase application using the load rule (with the SQL interface), got the error as recorded in the application log file and is attached at the bottom and the .odbc.ini file on the server looks as follows.
    Can somebody tell me whether .odbc.ini needs any correction or what else should I do to correct the issue and able to work thru using SQL interface? Appreciate any help provided in this regard. Thanks,
    .odbc.ini
    [ODBC Data Sources]
    DOLU003=IBM DB2 ODBC DRIVER
    [DOLU003]
    Driver=/home/db2inst1/sqllib/lib/libdb2.a
    Database=DOLU003
    [ODBC]
    Trace=0
    TraceFile=odbctrace.out
    InstallDir=/home/db2inst1/sqllib/odbclib
    [Mon Apr 20 15:16:29 2009]Local/New_Bud/Budget/Olapadm/Info(1021020)
    Cannot read SQL driver name for [] from [home/hyperion/.odbc.ini]
    [Mon Apr 20 15:16:43 2009]Local/New_Bud/Budget/Olapadm/Info(1013091)
    Received Command [SQLRetrieve] from user [Olapadm]
    [Mon Apr 20 15:16:43 2009]Local/New_Bud/Budget/Olapadm/Info(1021020)
    Cannot read SQL driver name for [] from [home/hyperion/.odbc.ini]
    [Mon Apr 20 15:16:43 2009]Local/New_Bud/Budget/Olapadm/Info(1021004)
    Connection String is generated
    [Mon Apr 20 15:16:43 2009]Local/New_Bud/Budget/Olapadm/Info(1021041)
    Connection String is [DSN=DOLU003;UID=...;PWD=...]
    [Mon Apr 20 15:16:43 2009]Local/New_Bud/Budget/Olapadm/Info(1021006)
    SELECT Statement [SELECT * FROM DB2OLADM.BD_DIMENSION_DEF_PC WHERE DIMENSION_ID
    = 12 ORDER BY TREE_NODE_NUM, PARENT_NODE, CHILD_NODE] is generated
    [Mon Apr 20 15:16:44 2009]Local/New_Bud/Budget/Olapadm/Info(1021013)
    ODBC Layer Error: [7] ==> [[DataDirect][ODBC 20101 driver]6013]
    [Mon Apr 20 15:16:44 2009]Local/New_Bud/Budget/Olapadm/Info(1021014)
    ODBC Layer Error: Native Error code [0]
    [Mon Apr 20 15:16:44 2009]Local/New_Bud/Budget/Olapadm/Error(1021001)
    Failed to Establish Connection With SQL Database Server. See log for more information
    --------------------------------------------------------------------------------------------------------------------------------------------

    I had similar errors when first setting up the SQL interface. Are you on a 64 bit operating system on the essbase server? If so Essbase needs to use the 32 bit odbc driver, not the default 64 bit driver.
    The 32 bit driver is still available here SysWOW64\odbcad32.exe <-----This is the 32 bit (Use)
    The Administrative tools by default uses system32\odbcad32.exe <----This is the 64 bit (Don't Use)
    Once I opened the 32 bit driver interface directly and set it up the errors went away.

  • Trouble to connect to wireless G routers after installed the latest update 10.10.2  . Anyone with the same problem? Please help Apple support team!! Macbook Pro mid 2010. PS.: Only with wireless G routers, the rest are fine (N, B...)

    Trouble to connect to wireless G routers after installed the latest update 10.10.2  . Anyone with the same problem? Please help !!! Macbook Pro mid 2010. PS.: Only with wireless G routers, the rest are fine (N, B..., and both radio bands)

    Trouble to connect to wireless G routers after installed the latest update 10.10.2  . Anyone with the same problem? Please help !!! Macbook Pro mid 2010. PS.: Only with wireless G routers, the rest are fine (N, B..., and both radio bands)

  • Dreamweaver CS4 having issues after installing PS CS6 Beta

    Hi All,
    I'm having issues with Dreamweaver CS4 after installing Photoshop CS6 Beta. I'm getting the follwing erros when trying to open any html file (see attached image).
    Once I click OK, the file will open, also now; any copy and paste commands will not work. Anyone else experiencing any problems with other apps after installing this beta version?
    Any help and feedback is much appreciated, thanks!

    Re :Re: Dreamweaver CS4 having issues after installing PS CS6 Beta
    Just a thought ...
    This may help!
    Uninstall the Beta Version of Photoshop CS6 now and then restart your computer and see if that works.
    Open the CS4 programs and see if that fixed the problem and it is all working as it should again.
    It is worth a try!
    All the best.

  • Issues after installing Mavericks

    I am having a ton of issues after installing macericks on wed evening, on my MBP 15" 2.5 GHz i7 with 8GB of memory,
    I have a task com.apple.internetaccouts, and com.apple.MailServiceAgent, taking upwards of 100% CPU at time and the fan will go full speed, and earlier today i had a msg come up that i had run out of usable memory and the sytem had paused programs, I have restarted a few times and still the same things are coming up and the system has become really slow.
    would think that with this system not being that old, that i should not be having these types of issues, if there is something that someone could lead me to ths casue i thnk you
    Thanks
    Doug

    Had this issue again today on my wife's iMac.  This was after the Mail.app update that was recently released.  I now have messed with this issue enough that I believe I have figured it out.
    I used to have a plugin for Mail called HTTPMail that was used to access Hotmail prior to them having POP/IMAP.  It seems that removing the account from Mail left some residual account details in the ~/Library/Mail/V2/MailData/Accounts.plist file.  Mavericks Mail.app chokes on this account detail and starts duplicating it numerous times.  That's why the Accounts.plist file grows so large.
    If you open the Accounts.plist file in a text editor (TextWrangler would be my suggestion), find any <dict> entry that points to services.msn.com in any way and remove all those <dict>...</dict> entries, it should resolve the issue.  Warning though - I had to delete hundreds of entries so it took a while to do.  Once I finished it though, my wife's e-mail has been working fine.

  • Anyone else having battery life issues after installing Lion?

    Anyone else having battery life issues after installing Lion?

    Blue Sun Wing wrote:
    I have 7.1
    I think I would like to uninstall Lion as well.  I'd rather have my battery life back.
    See if this is helpful: http://www.iphone-my.com/mac/downgrading-lion-snow-leopard/               

  • Slow wireless on iPad2 after installing iOS6?

    Ever since installing iOS6 on my iPad2 I am experiencing a slow wireless connect time. Both my wife and I have an iPad2 and have both seen the connect time slow down. Pinterest is one of my wife's most used apps and it is really slow. I have read that this appears to be an issue others are having as we'll. Any thoughts would be appreciated.

    iOS 6 Wifi Problems/Fixes
    Fix For iOS 6 WiFi Problems?
    http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
    Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
    http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
    How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
    http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
    iOS 6 iPad 3 wi-fi "connection fix" for netgear router
    http://www.youtube.com/watch?v=XsWS4ha-dn0
    Apple's iOS 6 Wi-Fi problems
    http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
    ~~~~~~~~~~~~~~~~~~~~~~~
    Look at iOS Troubleshooting Wi-Fi networks and connections  http://support.apple.com/kb/TS1398
    iPad: Issues connecting to Wi-Fi networks  http://support.apple.com/kb/ts3304
    WiFi Connecting/Troubleshooting
    http://www.apple.com/support/ipad/wifi/
    How to Fix: My iPad Won't Connect to WiFi
    http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
    iOS: Connecting to the Internet
    http://support.apple.com/kb/HT1695
    iOS: Recommended settings for Wi-Fi routers and access points  http://support.apple.com/kb/HT4199
    Additional things to try.
    Try this first. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
    Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
    Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
    Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
    Try This - Renew IP Address:
        •    Launch Settings app
        •    Tap on Wi-Fi
        •    Tap on the blue arrow of the Wi-Fi network that you connect to from the list
        •    In the window that opens, tap on the Renew Lease button
    How to Quickly Fix iPad 3 Wi-Fi Reception Problems
    http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
    If none of the above suggestions work, look at this link.
    iPad Wi-Fi Problems: Comprehensive List of Fixes
    http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
    Fix iPad Wifi Connection and Signal Issues  http://www.youtube.com/watch?v=uwWtIG5jUxE
    Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
    How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
    Unable to Connect After iOS Update - saw this solution on another post.
    https://discussions.apple.com/thread/4010130
    Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
    ~~~~~~~~~~~~~~~
    If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
     Cheers, Tom

  • DW CS3 preview issue after installing Vista SP2

    I have DW CS3 installed on my desktop and laptop computers. One computer uses vista64 and the other vista32. After installing vista service pack 2, I now have the following issue previewing PHP pages under Apache: All browsers give me a "cannot display the webpage" error UNLESS I am connected to some kind of network--it could be the internet or my peer-to-peer network. My destop computer is attached to a printer via RJ45 cable. If the printer is turned on, I can preview webpages in DW. If the printer is turned off, I cannot! Or, if I am connected to the internet through my wireless internet card, I can preview pages, otherwise, not.
    Previous to installing SP2, I was able to preview pages on both computers without the need to be connected to a network, so I am pretty sure that SP2 is involved in this new issue.
    When Apache and MySQL start up in the XAMPP control panel, there are no errors, and I can go into PHPMyAdmin just fine.
    Has anyone else run into this? Any thoughts?

    I'm just following up here. I have not solved the issue, but I did figure out that the problem isn't with vista service pack 2 but with Kaspersky anti-virus 2009.

  • Networking Issues after Upgrading to Windows 8.1

    I have a Windows 8 desktop PC that is working fine with my network.  I can browse the Internet fine using all major browsers etc.  After upgrading to Windows 8.1 through the Windows Store I noticed that my wired networking was not working correctly.
     The status of the network does not change (i.e. it doesn't change to Limited Connectivity) however browsing to sites in Chrome, IE or Firefox doesn't work as well as Windows 8.
    IE11 gives me the error "This page can't be displayed, make sure the web address is correct" and other browsers give a similar error.  I normally have to refresh 2-3 times to get a new page to load, sometimes even more.  Everything works
    fine from a laptop connected at the same time so it isn't an network issue with my provider.
    I thought this might be a driver issue with the two on-board Marvell wired network adapters.   I wasn't able to rollback the driver to older versions I found on the Internet.  I then purchased another network card, Intel Desktop gigabit and the
    issue still persists with that adapter.  I then tried a USB wireless adapter and the issue still persists using wifi with the wired adapters disabled.  I tried a new network cable and no luck either.  I also tried resetting the IP stack using
    the various netsh commands.
    After that I thought I might try reset the Windows 8.1 PC, however that didn't work as I didn't have the restore image available as I upgraded from the Windows Store.  I then tried installing Windows 8.1 fresh using a ISO with my Windows 8 key using
    some of the recent guides that are available.  That all worked but it didn't fix the networking issues.
    I re-installed Windows 8.0 and the networking is now fixed and back to working normal again.  I'd like to try again but I think I will have the same problems.  I can't imagine why this would be a driver issue as I tried 3 different network adapters
    and two installs of Windows 8.1.  Any ideas what would be the cause of the Windows 8.1 issue?

    HI,
    Since this issue only occurred in the your desktop PC, and many network adapters you tried, failed, thus I think maybe we should focus on the model of your desktop PC, I suggest you update the BIOS and chipset from the manufacture to improve
    the performance of win8.1.
    Please also test this issue in safe mode with networking.
    Please refer to:
    Windows Startup Settings (including safe mode)
    http://windows.microsoft.com/en-in/windows-8/windows-startup-settings-including-safe-mode
    I’d like to share the following article with you:
    Wired and wireless network problems
    http://windows.microsoft.com/en-IN/windows/network-connection-problem-help#network-problems=windows-81&v1h=win81tab1&v2h=win7tab1&v3h=winvistatab1&v4h=winxptab1
    Regards,
    Yolanda
    We
    are trying to better understand customer views on social support experience, so your participation in this
    interview project would be greatly appreciated if you have time.
    Thanks for helping make community forums a great place.
    The issue occurs in safe mode as well under Windows 8.1.  The motherboard is an Asus P5B Premium, however it works on Windows 8.  How would I update the chipset when booted into Windows 8.1?  In Device Manager it wasn't allowing me to update
    the network drivers as they were newer versions already installed.
    Edit:  I also installed at Intel Chipset Device software dated 8/8/2013 with version 9.​4.​0.​1026 and the issue still occurs.  I am also running the latest BIOS that is available.

  • Reganining (Wireless) Network Scanning after 10.8.2 update

    Up to 10.8 I hab no issues printing and scanning wirelessly through my Canon MP620 whoch is connected directly to my Wireless network. They showed up as two devices (Printer / Scanner) in my System Preferences.
    However, after updating to 10.8.2 - though the scanner was still there in the system prefs - it just didn't wotk anymore and would not be found.
    the scanner worked well, since when connected directly to the Mac it showed up immediately and worked fine.
    I tried a couple of things that didn't help before I came across the solution.
    First, what didn't work:
    - updating drivers through software update
    - updating drivers through CANON
    - reconfiguring the Printer/Scanner through Canon LJ Network Tool (Version 4.0)
    - Restarting, rebooting machine, Printer etc.
    What did help finally: Restarting printer system (right-click in print/scan prefs) and reboot.
    Now the printer as well as the scanner showed up and could be re-added.
    OPne more glitch I had to overcome was that the scanner was detected, yet it gave me a communication error that went away, after I printed the first page.
    Now, everything works as expected.
    Since there is a lot of discussions about this going on I thought I'd share this.

    Very strange, you're not the only one with the old build#... I wonder...
    Hmmm, did you try the direct download & install method?
    http://support.apple.com/kb/DL1611
    I think that's it, but shows the original date!?

  • Facetime issue - after installing a new logic board due to liquid damage.

    I installed a new logic board this week.. after installing the os x operation system and then upgrading it to mavericks and i used migration assistant to load my backuped user from an external disk.
    I tried to log in using my apple id ( which is verified) it couldn't log in beacuse "could not sign in. please check your network connection and try again"
    and i did all the updates of mavericks. i tried also before installing mavericks i thougt upgrading will fix it..
    i saw on forums that i should add 2 DNS's (8888 and 8844) didn't work.
    i tried connection to my phones hotspot - didn't work.
    i also went to the firewall thing to allow it recieve cennections..
    pleassee help!!
    is there a way to reinstall the facetime or something?!?!?!

    My problem solved could possiblly be your solution: Check to make sure your system serial number is being read by your logic baord.  If the tech forgot to reenter the serial number, it's a known issue for Facetime and Messages (apparantly not know enough yet though, no tech bulliten exists on the topic).
    I spent several days trouble shooting my inablility to login to my account with Facetime or Messages (other cloud services worked) after upgrading to Mavericks.  I went as far as doing a clean install on my hard drive after spending two hours with a baffled mac tech in a retail store and many hours searching the message boards.
    I have never had a logic board (or hard drive) replaced on my Macbook Air, but somehow after the Mavericks update the logic board stopped reading the serial number on my system.  It took a call to Apple and a ticket opened to engineering to figure this out (after I uploaded log files).
    They were puzzled I experienced this without a logic board replacement, but it was indeed the root cause of the facetime and messages apps failing to log in, and said they'd run in to it recently more than once.
    Wish I knew how to post this unbiquitously across all the boards for folks to troubleshoot by simply looking at their system info in the Apple menu; Apple scheduled an appointment for me at an Apple genius bar and it was fixed in fifteen minutes.

Maybe you are looking for