Dynamically add and modify listbox columns number and names

I need to dynamically modify number and names of columns in a listbox.
What should I do for this? And is it even possible?

Frank-
Thanks for the suggestion -- I hadn't tried that but just did and it still doesn't seem to work. Would the binding cache AttrDefs separately from results?

Similar Messages

Dynamically Add and Remove Train Stop with version 11.1.2.3

I have found examples with prior versions, such as http://adfpractice-fedor.blogspot.com/2011/12/dynamic-adf-train-showing-train-stops.html.
But, they do not work in 11.1.2.3.
It appears that the APIs have changed considerably.
Please advise as to a similiar example that is based on the API model for 11.1.2.3
Thanks in advance for your help.

Hi,
I have a requirement to dynamically add different train stops at runtime, which are not part of the task flow at design time. I would like to build the train at runtime based on various conditions that occur. Is this possible?
Train stops can only be removed from the train model before the first view renders, which means during task flow initialization. To a later point you cannot remove but hide stops. The train model is created upon task flow initialization too and any train stop that is not part of the model virtually doesn't exist. In your case I think creating a custom train model from ground up and using this with the train is the way to go. The default task flow metadata based implementation doesn't seem to do what you need it for. Alternatively, if you can predict the maximum number of train stops, you can design them at design time and then remove those you don't need at runtime using a HashMap reference in the train stop configuration and check the HashMap values upon initialization.
Here's a write up on trains I did in the past: http://www.oracle.com/technetwork/issue-archive/2011/11-sep/o51adf-452576.html
More documents you find on ADF Code Corner http://www.oracle.com/technetwork/developer-tools/adf/learnmore/index-101235.html (just search for train)
Frank

Modified by column the user name is not updated

Hi
I am using the client side object model to upload the document in the document library, its working fine, but the modified by column the each user name is not updated, instead of system name is updated for all the
upload.
In the below screen shot where all the documents uploaded by the different users but its show the only the system instead of user name how to solve the issue.

thanks Hemendra
Agrawal
i will
try it another one issue
i cant able to upload the file size >1 MB its showing error."the remote server returned an error (400) bad request."
i tried your previous post but its not working.

Dynamically add and embed WD components without predefining an interface

Hey Community,
I have the following problem:
I have a view with many ViewContainers in it. When I start the programm I want to decide dynamically which components should be used and displayed in these containers. Bbefore I start the programm I do not know which components I am going to load.
I already saw the possibility to predefine an interface for all components but in my case there would be no common interface. Beside that I tried it with the Interface IF_WD_VIEW_CONTROLLER and its method Prepare_dynamic_navigation. This method looks very similar, but I don' want a navigation, I just want to display it in an existing view.
So my question:
Is it possible to add WD components and embed their views to existing view cointainers during runtime?
Thank you for your help!

Have a look at the MAIN view of the FPM_GAF_COMPONENT in the WDDOINIT method. It creates a component usage and embeds the used component view into current view.
DATA: lr_usage_group TYPE REF TO if_wd_component_usage_group.
DATA: lr_component TYPE REF TO if_wd_component.
lr_component = wd_comp_controller->wd_get_api( ).
lr_usage_group = lr_component->create_cmp_usage_group(
                       name            = 'MESSAGE_AREA_USAGES'
                       used_component = 'FPM_MESSAGE_MANAGER' ).
wd_this->mo_message_area_usage = lr_usage_group->add_component_usage( 'MESSAGE_AREA_USAGE' ).
wd_this->mo_message_area_usage->create_component( 'FPM_MESSAGE_MANAGER' ).
DATA: lr_view_controller_api TYPE REF TO if_wd_view_controller.
lr_view_controller_api = wd_this->wd_get_api( ).
lr_view_controller_api->prepare_dynamic_navigation(
                  source_window_name          = 'FPM_WINDOW'
                  source_vusage_name          = 'MAIN_USAGE_1'
                  source_plug_name            = 'OUT'
                  target_component_name       = 'FPM_MESSAGE_MANAGER'
                  target_component_usage      = 'MESSAGE_AREA_USAGE'
                  target_view_name            = 'MESSAGES'
                  target_plug_name            = 'DEFAULT'
                  target_embedding_position   = 'MAIN/VC_MESSAGE_AREA' ).
wd_this->fire_out_plg( ).
I can't see why you couldn't repeat this multiple times!
given that what you are asking to do is what the FPM does - it certainly should be possible!
Hope this code snippit helps.

HT5616 my friend give me his apple id that i use to download apps and then i change the email add and name but i cant change the password. now i update my ios now its asking for the id and password for icloud... i cant open the yahoo id coz its deleted

my friend give me his apple id that i use to download apps and then i change its email add name and address.. now i update my iphone ios then now its asking for i cloud id and password but when i open the email add for that account its been dissabled because its been long time not used... what can i do to activate my iphone???

Please only post one time per issue. Answered in your other post.

Dynamically Create and Compile Java Classes

Hi,
I have a requirement to dynamically create and compile Java classes and would like some advice on the best method to do so.
Basically the project I am working on involves creating "Factors". Factors are items that have both attributes and weights so for example Factor A could have attribute B with weight 0.76, and attribute C with weight 1.33. There are a number of methods common to all factors such as calculateTotal, identify etc etc.
At the moment the application has 5 factors, but there is a requirement to dynamically add and remove factors on the fly.
I current solution I have been considering is using XML to describe the new class, build up the class and compile it; something along the lines of what is descibed at
http://www.javaworld.com/javaworld/jw-02-2002/jw-0201-xslt_p.html
however i would like to consider all options.
Any help with this is greatly appreciated.

You want to dynamically create and compile Java classes.
I would try the following:
(1) Write the Source code of the new class into a text file with the name MyNewClass.java
(2) compile this new .java-file with Runtime r = getRuntime();
try {
r.exec ("javac MyNewClass.java");
} catch (IOException e) {
System.out.println("ooops " + e.getMessage());
} (3) somehow try to load that new class, maybe using ClassLoader cl = ClassLoader.getSystemClassLoader();
cl.loadClass("MyNewClass");

IP: Dynamic Data and Lead Columns

Hello,
In IP, there is not such thing as "Dynamic Data and Lead Columns" which we have used successfully in BPS. We have quite normal case where accounts are on rows and columns are defined as follows:
Column 1): KF Qty1, Period #, Year "Var Current year (single value)"
Columns 2-n): KF Amt1, Period "Var periods current year (multiple values)", Year "Var Current year"
Column n+1): Sum columns 2-n
Number of periods in variable "Var periods current year" is not fixed and maintained by superuser, so number of columns is somewhere between 3 and 14 (at least one open period, maximum 12, plus the Qty1 and Sum columns).
How would you fix this in IP?
Thanks for answers!
Aki

Hello Aki,
you could put the period into the columns as char.
if you make a selection to value # and the variable you will se as many columns as periods are selected in the variable plus the one column for #.
regards
Cornelia

PIVOT with multiple columns to add and multiple levels of grouping

Hi friends,
I got a table with the columns in the form of:
CRITERIA_A,
CRITERIA_B,
CRITERIA_C,
AMOUNT_A,
AMOUNT_B,
AMOUNT_C,
AMOUNT_D
Any way to design a pivot to present the table reflecting:
Sums of Amount_A, Amount_B, Amount_C, Amount_D
For Rows reflecting grouping levels on:
Criteria_B, Criteria_C
and Columns breakup for:
Criteria_A?
An example like:
Criteria_A1
Criteria_A2
Criteria_A3
Criteria_A4
Row Labels
Sum of Amount_A
Sum of Amount_B
Sum of Amount_C
Sum of Amount_D
Sum of Amount_A
Sum of Amount_B
Sum of Amount_C
Sum of Amount_D
Sum of Amount_A
Sum of Amount_B
Sum of Amount_C
Sum of Amount_D
Sum of Amount_A
Criteria_B3
94
107
36
127
84
132
41
176
24
16
67
29
38
Criteria_C1
24
25
5
49
14
66
5
49
24
16
67
29
Criteria_C2
70
82
31
78
38
Criteria_C3
38
41
31
78
Criteria_C4
32
25
5
49
Criteria_B1
56
142
78
26
32
25
67
8
24
Criteria_C2
24
66
26
8
32
25
67
8
Criteria_C3
32
76
52
18
Criteria_C4
24
Criteria_B2
162
309
264
81
132
230
155
124
14
25
52
8
38
Criteria_C1
38
76
26
8
62
98
98
66
14
25
52
8
38
Criteria_C2
86
157
186
44
70
132
57
58
Criteria_C3
38
76
52
29
Criteria_B4
100
148
130
116
56
142
93
57
46
Criteria_C1
24
66
67
49
32
Criteria_C2
32
76
26
8
14
Criteria_C3
76
82
78
67
Criteria_C4
24
66
52
49
Grand Total
312
558
378
234
348
535
393
424
94
183
212
94
146
Thanx in advance, Best Regards, Faraz A Qureshi

Sounds like this to me if in T-SQL query
(best guess based on what you posted)
SELECT
CRITERIA_B,
CRITERIA_C,
SUM(CASE WHEN CRITERIA_A = 'Critera_A1' THEN AMOUNT_A ELSE 0 END) AS CRITERIA_A1_AMOUNT_A,
SUM(CASE WHEN CRITERIA_A = 'Critera_A1' THEN AMOUNT_B ELSE 0 END) AS CRITERIA_A1_AMOUNT_B,
SUM(CASE WHEN CRITERIA_A = 'Critera_A1' THEN AMOUNT_C ELSE 0 END) AS CRITERIA_A1_AMOUNT_C,
SUM(CASE WHEN CRITERIA_A = 'Critera_A2' THEN AMOUNT_A ELSE 0 END) AS CRITERIA_A2_AMOUNT_A,
SUM(CASE WHEN CRITERIA_A = 'Critera_A2' THEN AMOUNT_B ELSE 0 END) AS CRITERIA_A2_AMOUNT_B,
SUM(CASE WHEN CRITERIA_A = 'Critera_A2' THEN AMOUNT_C ELSE 0 END) AS CRITERIA_A2_AMOUNT_C,
SUM(CASE WHEN CRITERIA_A = 'Critera_AN' THEN AMOUNT_A ELSE 0 END) AS CRITERIA_AN_AMOUNT_A,
SUM(CASE WHEN CRITERIA_A = 'Critera_AN' THEN AMOUNT_B ELSE 0 END) AS CRITERIA_AN_AMOUNT_B,
SUM(CASE WHEN CRITERIA_A = 'Critera_AN' THEN AMOUNT_C ELSE 0 END) AS CRITERIA_AN_AMOUNT_C,
FROM Table
GROUP BY CRITERIA_B,
CRITERIA_C
to make it dynamic see
http://beyondrelational.com/modules/2/blogs/70/posts/10791/dynamic-crosstab-with-multiple-pivot-columns.aspx
However it would be much easier to build this in SSRS reports using matrix if you can use it.
In that case just bring data as is
then add a matrix to report
Add column grouping on Criteria A and Row grouping on Criteria B and then Criteria C .
In data portion add three columns with expressions as
=SUM(Fields!Amount_A.Value)
=SUM(Fields!Amount_B.Value)
=SUM(Fields!Amount_C.Value)
then you will get exact format what you're asking for
Please Mark This As Answer if it solved your issue
Please Vote This As Helpful if it helps to solve your issue
Visakh
My Wiki User Page
My MSDN Page
My Personal Blog
My Facebook Page

I have Adobe Design Standard CS6 purchased 2013 with serial number but cannot find to download it onto a new mac laptop. When I try and add the 24-digit serial number to my account it doesn't seem to work?

I have Adobe Design Standard CS6 purchased 2013 with serial number but cannot find to download it onto a new mac laptop. When I try and add the 24-digit serial number to my account it doesn't seem to work?

CS6 - http://helpx.adobe.com/x-productkb/policy-pricing/cs6-product-downloads.html
You can also download the trial version of the software thru the page linked below and then use your current serial number to activate it.
Be sure to follow the steps outlined in the Note: Very Important Instructions section on the download pages at this site and have cookies enabled in your browser or else the download will not work properly.
CS6: http://prodesigntools.com/adobe-cs6-direct-download-links.html

Need to Add and Remove Columns of ADF Read Only table from Backing bean

I have a scenario where I am trying to Populate TransientVO which is shown has a ADF Read Only Table in page.
I have couple of Check Boxes Based on their selection I am trying to render and hide certain Columns.
But the Issue which I am facing is only the Column Header seems to change where as the Rows and Values doesnt..
even If I apply the expression language rendering condition on the outputText inside those columns.. ..
So I am thinking to add and remove VO Attribute columns to the table from backing bean.
Need some sample code snippet or a better design to achieve this. Its kind of urgent too...having an aggressive deadline :(
Please chip in People..
Thanks in Advance .
TK

Table Code..
<af:table value="#{bindings.InventoryGridTrans.collectionModel}"
                                var="row"
                                rows="#{bindings.InventoryGridTrans.rangeSize}"
                                emptyText="#{bindings.InventoryGridTrans.viewable ? 'No data to display.' : 'Access Denied.'}"
                                fetchSize="#{bindings.InventoryGridTrans.rangeSize}"
                                rowBandingInterval="0" id="t4"
                                partialTriggers="::sbcSales ::sbcUsage ::cb1">
                        <af:column sortProperty="Period" sortable="false"
                                   headerText="#{bindings.InventoryGridTrans.hints.Period.label}"
                                   id="c38">
                          <af:outputText value="#{row.Period}" id="ot33"/>
                        </af:column>
                        <af:column sortProperty="Past12SalesCount"
                                   sortable="false"
                                   headerText="#{bindings.InventoryGridTrans.hints.Past12SalesCount.label}"
                                   id="c29"
                                   rendered="#{backingBeanScope.IndexPageBackingBean.onUsage != true and backingBeanScope.IndexPageBackingBean.onSales == true}">
                          <af:outputText value="#{row.Past12SalesCount}"
                                         id="ot40"
                                         rendered="#{backingBeanScope.IndexPageBackingBean.onUsage != true and backingBeanScope.IndexPageBackingBean.onSales == true}"
                                         visible="#{backingBeanScope.IndexPageBackingBean.onUsage != true and backingBeanScope.IndexPageBackingBean.onSales == true}">
                            <af:convertNumber groupingUsed="false"
                                              pattern="#{bindings.InventoryGridTrans.hints.Past12SalesCount.format}"/>
                          </af:outputText>
                        </af:column>
                        <af:column sortProperty="Past12UsageCount"
                                   sortable="false"
                                   headerText="#{bindings.InventoryGridTrans.hints.Past12UsageCount.label}"
                                   id="c40"
                                   rendered="#{backingBeanScope.IndexPageBackingBean.onUsage == true and backingBeanScope.IndexPageBackingBean.onSales != true}"
                                   visible="#{backingBeanScope.IndexPageBackingBean.onUsage == true and backingBeanScope.IndexPageBackingBean.onSales != true}">
                          <af:outputText value="#{row.Past12UsageCount}"
                                         id="ot47"
                                         rendered="#{backingBeanScope.IndexPageBackingBean.onUsage == true and backingBeanScope.IndexPageBackingBean.onSales != true}"
                                         visible="#{backingBeanScope.IndexPageBackingBean.onUsage == true and backingBeanScope.IndexPageBackingBean.onSales != true}">
                            <af:convertNumber groupingUsed="false"
                                              pattern="#{bindings.InventoryGridTrans.hints.Past12UsageCount.format}"/>
                          </af:outputText>
                        </af:column>
                        </af:column>
                </af:table>

Displaying the Row and Column number in the report

I am trying to show row and column number in the report (not just web preview). I am using Hyperion Reports Version 7.2.5.168

use a formula column/row. use RANK function in that. (e.g. Rank([A], asc) will sort the rows based on column A values in ascending order)
you can use this rank in your heading.
But frankly this is not so easy. You have to do it in a very intelligent way, so that rank gives you column number/row number any how.
Have a try and let see if you find a appropriate solution.
Regards,
Rahul

My iphone email account settings is grayed out and I can't add or modify my email accounts. Does anyone know why this happens and how to fix it? Thanks!

Hi, My iphone e-mail account settings are grayed out and I can't add or modify my e-mail accounts. Does anyone know how to fix this? Do I have to reset my phone to make it work? Will I lose my data?

Settings>General>Restrictions...are yours on? Allow Changes>Accounts>On/Off?

How do I do to add and remove Shape3D objects dynamically from TransfGroup?

Hi, everyone,
How do I do to add and remove Shape3D objects dynamically from TransformGroup?
I have added two Shape3D objects in the TransformGroup and I wanted to remove one of it to add another. But, the following exception occurs when I try to use �removeChild� :
�Exception in thread "AWT-EventQueue-0" javax.media.j3d.RestrictedAccessException: Group: only a BranchGroup node may be removed at javax.media.j3d.Group.removeChild(Group.java:345)�.
Why can I add Shape3D objects and I can�t remove them? Do I need to add Shape3D object in the BranchGroup and work only with the BranchGroup? If I do, I think this isn�t a good solution for the scene graph, because for each Shape3D object I will always have to use an associated BranchGroup.
Below, following the code:
// The constructor �
Shape3D shapeA = new Shape3D(geometry, appearance);
shapeA.setCapability(Shape3D.ALLOW_GEOMETRY_READ);
shapeA.setCapability(Shape3D.ALLOW_GEOMETRY_WRITE);
shapeA.setCapability(Shape3D.ALLOW_APPEARANCE_READ);
shapeA.setCapability(Shape3D.ALLOW_APPEARANCE_WRITE);
Shape3D shapeB = new Shape3D(geometry, appearance);
shapeB.setCapability(Shape3D.ALLOW_GEOMETRY_READ);
shapeB.setCapability(Shape3D.ALLOW_GEOMETRY_WRITE);
shapeB.setCapability(Shape3D.ALLOW_APPEARANCE_READ);
shapeB.setCapability(Shape3D.ALLOW_APPEARANCE_WRITE);
BranchGroup bg = new BranchGroup();
bg.setCapability(ALLOW_CHILDREN_READ);
bg.setCapability(ALLOW_CHILDREN_WRITE);
bg.setCapability(ALLOW_CHILDREN_EXTEND);
TransformGroup tg = new TransformGroup();
tg.setCapability(TransformGroup.ALLOW_TRANSFORM_WRITE);
tg.setCapability(TransformGroup.ALLOW_TRANSFORM_READ);
tg.setCapability(TransformGroup.ALLOW_CHILDREN_READ);
tg.setCapability(TransformGroup.ALLOW_CHILDREN_WRITE);
bg.addChild(tg);
tg.addChild(shapeA);
tg.addChild(shapeB);
// The method that removes the shapeB and adds a new shapeC �
Shape3D shapeC = new Shape3D(geometry, appearance);
shapeC.setCapability(Shape3D.ALLOW_GEOMETRY_READ);
shapeC.setCapability(Shape3D.ALLOW_GEOMETRY_WRITE);
shapeC.setCapability(Shape3D.ALLOW_APPEARANCE_READ);
shapeC.setCapability(Shape3D.ALLOW_APPEARANCE_WRITE);
tg.removeChild(shapeB);
tg.addChild(shapeC);Thanks a lot.
aads

�Exception in thread "AWT-EventQueue-0"
javax.media.j3d.RestrictedAccessException: Group:
only a BranchGroup node may be removed I would think that this would give you your answer -
Put a branch group between the transform and the shape. Then it can be removed.
Another thing you could try: This doesn't actually remove the shape, but at least causes it to hide. If you set the capabilities, I think you can write the appearance of the shapes. So, when you want to remove one of them, write an invisible appearance to it.

How can I modify one column of current and next record depending of some criteria?

Having DDL
CREATE TABLE #ServiceChange(
[ID] [int] identity(1,1),
[SHCOMP] [char](2) NOT NULL,
[SHCRTD] [numeric](8, 0) NOT NULL,
[SHCUST] [numeric](7, 0) NOT NULL,
[SHDESC] [char](35) NOT NULL,
[SHTYPE] [char](1) NOT NULL,
[SHAMT] [numeric](9, 2) NOT NULL,
[CBLNAM] [char](30) NOT NULL,
[GROUPID] [char](2) NULL
And original and desire data in below link
https://www.dropbox.com/sh/bpapxquaae9aa13/AADnan31ZASublDjN7sa2Vvza
I would like to know how can I modify one column of current and next record depending of some criteria using SQL2012?
The criteria is:
Type should always flow F->T
if current abs(amount)> next abs(amount) then groupid = 'PD'
if current abs(amount)< next abs(amount) then groupid = 'PI'
there is no case when those amounts will be equals
where current(custid) = next(custid) and current(service) = next(service) and groupid is null
Any help will be really apreciated.
Thank you

I tried that and got this error
'LAG' is not a recognized built-in function name.
You said you were using SQL 2012, but apparently you are not. The LAG function was added in SQL 2012. This solution works on SQL 2005 and SQL 2008:
; WITH numbering AS (
   SELECT groupid,
rowno = row_number() OVER (PARTITION BY custid, service ORDER BY date, id)
   FROM   #ServiceChange
), CTE AS (
   SELECT a.groupid,
CASE WHEN abs(a.amount) < abs(b.amount) THEN 'PD'
   WHEN abs(a.amount) > abs(b.amount) THEN 'PI'
END AS newgroupid
   FROM numbering a
   JOIN numbering b ON b.custid = a.custid
AND b.service = a.service
AND b.rowno   = a.rowno - 1
UPDATE CTE
SET   groupid = newgroupid
Erland Sommarskog, SQL Server MVP, [email protected]

A simple percentage? How does one add a percentage to a number? If I have 100 and I want to add 15% and get a total, what formula would I use?

How does one add a percentage to a number? If I have 100 and I want to add 15% and get a total, what formula would I use?

You can do something like this:
D2=B2*(1+C2/100)
this means in the cell D2 type the following "=B2*(1+C2/100)"... leave out the double quotes

Dynamically add and modify listbox columns number and names

Similar Messages

Maybe you are looking for