Dynamically change the cell editor in the table control
Hi..
I have 3 columns in a table . of which in one column we need to change the cell editor dynamically at runtime.
i.e for example i have columns as carrid, connid and fldate.
For the first 2 rows the cell editor for the carrid clomn shud be a dropdown and from there on in the next rows for the same carrid column it shud be a input field.
Can experts plz help me how to achieve this as this is very high priority issue....
Regards,
Madhu...
This is actaully fairly simple to do. You will need to add a cellVariant to your table column. You can then dataBind a context attribute to the selectedCellVariant property of the column to control which cellVariant will be used. This allows you to control row-by-row which cell editor you want to output.
http://help.sap.com/saphelp_nw70/helpdata/EN/bd/5d9041d3c72e7be10000000a1550b0/frameset.htm
http://help.sap.com/saphelp_nw70/helpdata/EN/56/5e9041d3c72e7be10000000a1550b0/frameset.htm
Also here is an example that I did the other day that uses Cell Variants within ALV. This process is actually a little more complicated because you have to go through the ALV APIs. To do this in a normal table is actually easier because you can create the cellVariant in the layout designer.
Re: Freely-programmed value help for a single ALV cell
Similar Messages
-
Dynamically change the table fields in smart form
hi all,
can any one suggest me the way to change the height and the width of a table dynamically in smart form.
thanx
ManishHello,
That is not possible. You cannot alter the height and width of the smartform. Mainwindows height adjust automatically according to the data.
Thanks,
Jayant -
How to dynamically change the table name inside a view
Hi All,
create table t_auto_feeds
id number,
table_name vachar2(100));
insert into t_auto_feeds values(1,'T_FEED_POSITIONS');
insert into t_auto_feeds values(2,'T_KAP_MTM');
assume there are 100 records on id=1 in T_FEED_POSITIONS and 100 records of id=2 in T_KAP_MTM (id 1 is present only in t_feed_positions & id 2 is present only in t_kap_mtm)
i need to create a view such that it needs to give the count of records based on the id
create or replace view aa_view as
select count(*), id from t_feed_position group by id
union
select count(*), id from t_kap_mtm group by id;
I am getting a proper result when i query the view like select * from aa_view where id=1 but will the other union query seems to be a overhead?. I am having 10 such tables configured for different id in t_auto_feeds.so do i need to put 10 unions or is there a better way to handle this stuff.
I know i can use a PLSQL block and dynamically build view structure, the problem is the view itself is configured in a table , so i cant write a proc for this.. can this aa_view be modified such that it queries only the table(using the t_auto_feeds ) which matches the id rather than the entire list.
Kindly help me in this regard and let me know in case u need any further information from my side.>
so do i need to put 10 unions or is there a better way to handle this stuff.
>
Yes - you need 10 unions
Yes - there is a better way so that only one of the 10 queries does anything.
You can use SYS_CONTEXT to control the query selection.
Here is an example of using SYS_CONTEXT. Try this code in the SCOTT schema.
create or replace context VIEW_CTX using SET_VIEW_FLAG;
create or replace procedure SET_VIEW_FLAG ( p_table_name in varchar2 default 'EMP')
as
begin
dbms_session.set_context( 'VIEW_CTX', 'TABLE_NAME', upper(p_table_name));
end;
select * from emp where 'EMP' = sys_context( 'VIEW_CTX', 'TABLE_NAME' );
select * from emp1 where 'EMP1' = sys_context( 'VIEW_CTX', 'TABLE_NAME' );
select * from emp2 where 'EMP2' = sys_context( 'VIEW_CTX', 'TABLE_NAME' )
exec set_view_flag( p_table_name => 'EMP' );
exec set_view_flag( p_table_name => 'EMP1' );
exec set_view_flag( p_table_name => 'EMP2');
SELECT sys_context( 'VIEW_CTX', 'TABLE_NAME' ) FROM DUAL
CREATE VIEW THREE_TABLE_EMP_VIEW AS
select * from emp where 'EMP' = sys_context( 'VIEW_CTX', 'TABLE_NAME' )
union all
select * from emp1 where 'EMP1' = sys_context( 'VIEW_CTX', 'TABLE_NAME' )
union all
select * from emp2 where 'EMP2' = sys_context( 'VIEW_CTX', 'TABLE_NAME' )
SELECT * FROM THREE_TABLE_EMP_VIEWNote that you set the context for the table you want. This doesn't have to be a table name it could just be flag value
-- use the emp table
exec set_view_flag( p_table_name => 'EMP' );
-- ue the emp1 table
exec set_view_flag( p_table_name => 'EMP1' );
-- use the emp2 table
exec set_view_flag( p_table_name => 'EMP2'); -
How to dynamically change the table name for a update statement
Hi All,
I need to update a coulumn xyz in either of tables abc and efg based on some condition.
I wrote a cursor which has union of two queries(one querying abc and other efg)
Now based on some inparameter only one will be executed at a time.
And based on some condition a coulumn xyz needs to be updated which is in either of the table.
As the update condition is same
Update abc/efg set xyz=data where condition
I am looking to initialize a variable like v_tname based on some condition and update like
update v_tname .........
(Exactly that may not be like so, But looking a technique like this)
Please helpIf there is only two tables you'll need to update then you are better off using static SQL and implementing something like this instead:
DECLARE
update_condition BOOLEAN;
BEGIN
-- initialize update_condition
update_condition := <some_boolean_check>;
IF update_condition
THEN
UPDATE abc
SET xyz = some_val
WHERE some_col = some_other_val;
ELSE
UPDATE fgh
SET xyz = some_val
WHERE some_col = some_other_val;
END IF;
END;
/Hope this helps! -
Dynamically change the Priority Group of Logical Table Sources in OBIEE 11g
Hi All,
I have 2 Logical Table Sources(LTS 1 and LTS 2 for a Logical Table in BMM Layer).
Example: Logical Table : Sample
LTS Source 1 : Sample 1(Priority Group Set to 1)
LTS Source 2 : Sample 2(Priority Group Set to 0)
I have set the Priority Group of Sample 1 LTS Source to 1 and Priority Group of Sample 2 LTS Source to 0.
I need to dynamically change the Priority Group of Sample 1 LTS Source to 0 if my role is DEVELOPER where role is a column in database.
If my role is not equal to DEVELOPER then the Priority Group of Sample 1 LTS Source will remain same(1).
Please suggest how can i achieve this.
Thanks,
Soukath Alihello Soukath Ali,
didi you find a way to dinamically changing Priority Group?
thanks,
Maria Teresa Marchetti -
How to dynamically update the Table?
Hi All,
Hope somebody will help me out ot resolve my issue.
In my application, about 10 analog channels data coming in. Out of which two parameter needs to get updated dynamically on the table. (For each Rpm between 500-1000, in steps of 50, have to capture Pressure points & show it on the table.)
I seen there is one method called table method available which helps to set the value of a particular cell specified by corresponding row and column index.
I tried this. In row 0, col 0 & col 1 it put what value I specified by using that table method. when it goes to row 1, col 0 & col 1 also got updated but vanishing the above put row 0, col 0 & col 1 values. so at any point of time, I am able to see only the current row values.
Hope there should be some dynamic refreshing method available or else I dont know how to handle this situation. Pls. clarify.
Thanks,
KousyHi,
Thanks.
But I am not able to update dynamically.
I just done slight changes to your update.vi. Just run Update_1.vi and after update
button is pressed, change the row, col index to see the update. please note
it is not able to update if matrix exceeds 3x4. i.e set row index=3
col index=0; new cell value = 10. it is not updating.. it might because of initialization
of 3x4 matrix values at the start.. ot the way I am trying out is bad?
By using Table method itself I got the solution what I want. I have attached that vi too.
just check out and reply if any flaw..
Thanks,
Kousy
Attachments:
update_1.vi 94 KB
Table Update.vi 96 KB -
Alle experts:
In ALV layout report, how to dynamic change the layout int ABAP porgram?
e.g. I have save 5 layout, I need to change them base the my selection in ABAP program? How to do this?
Thanks in advance!Try to call fieldcatlog dymnamically. Refer tofollowing code. Reward if helpful.
REPORT zfir0001 MESSAGE-ID ztax.
Tables
TABLES : glt0, t001, skat.
Internal Tables
DATA: BEGIN OF itab OCCURS 0,
racct LIKE glt0-racct, "Account number
txt20 LIKE skat-txt20, "G/L account short text
co_1000 LIKE glt0-hslvt, "Balance carried forward for company code 1000
co_1100 LIKE glt0-hslvt, "Balance carried forward for company code 1100
co_1200 LIKE glt0-hslvt, "Balance carried forward for company code 1200
DATA : BEGIN OF itab1 OCCURS 0,
bukrs LIKE glt0-bukrs,
waers LIKE t001-waers,
END OF itab1.
DATA : BEGIN OF it_itab1 OCCURS 0.
INCLUDE STRUCTURE glt0.
DATA : END OF it_itab1.
Data Declarations
DATA : w_total LIKE glt0-hslvt,
w_count LIKE glt0-bukrs,
w_flg TYPE c,
lv_count TYPE i.
w_slash TYPE c VALUE ' '.
Selection screen
SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME TITLE tit1.
SELECT-OPTIONS : s_bukrs FOR glt0-bukrs OBLIGATORY,
s_racct FOR glt0-racct OBLIGATORY,
s_ryear FOR glt0-ryear OBLIGATORY,
s_rldnr FOR glt0-rldnr OBLIGATORY.
SELECTION-SCREEN END OF BLOCK b1.
INITIALIZATION.
tit1 = 'Please select:'(004).
TYPE-POOLS: slis. "ALV Declarations
DATA: i_fieldcat TYPE slis_t_fieldcat_alv WITH HEADER LINE,
gd_tab_group TYPE slis_t_sp_group_alv,
gd_layout TYPE slis_layout_alv,
gd_repid LIKE sy-repid.
********Geting the selected company code in table itab1****
START-OF-SELECTION.
IF NOT s_bukrs-high IS INITIAL.
itab1-bukrs = s_bukrs-low.
APPEND itab1.
w_count = s_bukrs-low.
DO.
IF s_bukrs-high = w_count.
EXIT.
ELSE.
w_count = w_count + 1.
ENDIF.
SELECT SINGLE * FROM t001
WHERE bukrs = w_count.
IF sy-subrc = 0.
itab1-bukrs = w_count.
APPEND itab1.
CLEAR itab1.
ENDIF.
ENDDO.
ELSE.
itab1-bukrs = s_bukrs-low.
APPEND itab1.
ENDIF.
SELECT * FROM glt0 INTO CORRESPONDING FIELDS OF TABLE it_itab1
WHERE rldnr IN s_rldnr
AND bukrs IN s_bukrs
AND ryear IN s_ryear
AND racct IN s_racct.
SORT it_itab1 BY bukrs.
LOOP AT it_itab1.
AT END OF racct.
w_flg = 'X'.
ENDAT.
SELECT SINGLE txt20 INTO (itab-txt20) FROM skat
WHERE spras = sy-langu
AND saknr = it_itab1-racct.
PACK it_itab1-racct TO it_itab1-racct.
itab-racct = it_itab1-racct.
w_total = it_itab1-hsl01 + it_itab1-hsl02 + it_itab1-hsl03 + it_itab1-hsl04 +
it_itab1-hsl05 + it_itab1-hsl06 + it_itab1-hsl07 + it_itab1-hsl08 +
it_itab1-hsl09 + it_itab1-hsl10 + it_itab1-hsl11 + it_itab1-hsl12 +
w_total + it_itab1-hslvt.
IF w_flg = 'X'.
READ TABLE itab1 WITH KEY bukrs = it_itab1-bukrs.
IF sy-subrc = 0.
SELECT SINGLE * FROM t001
WHERE bukrs = itab1-bukrs.
IF t001-waers = 'JPY' OR
t001-waers = 'HUF'.
w_total = w_total * 100.
ENDIF.
CASE it_itab1-bukrs.
WHEN '1000'.
itab-co_1000 = w_total.
WHEN '1100'.
itab-co_1100 = w_total.
WHEN '1200'.
itab-co_1200 = w_total.
ENDCASE.
COLLECT itab.
CLEAR: itab, w_flg, w_total.
ENDIF.
ENDIF.
ENDLOOP.
SORT itab BY racct.
IF NOT itab[] IS INITIAL.
PERFORM field_cat1.
lv_count = 1.
LOOP AT itab1.
PERFORM field_cat USING itab1-bukrs.
ENDLOOP.
PERFORM display_alv_report .
ELSE.
MESSAGE s000 WITH 'No records Found'(003).
ENDIF.
*& Form display_alv_report
text
FORM display_alv_report .
gd_repid = sy-repid.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
i_callback_program = gd_repid
is_layout = gd_layout
it_fieldcat = i_fieldcat[]
i_save = 'X'
TABLES
t_outtab = itab
EXCEPTIONS
program_error = 1
OTHERS = 2.
ENDFORM. "display_alv_report
*& Form field_cat1
text
FORM field_cat1 .
i_fieldcat-col_pos = 0.
i_fieldcat-fieldname = 'RACCT'.
i_fieldcat-seltext_m = 'Account'(001).
i_fieldcat-fix_column = 'X'.
i_fieldcat-emphasize = 'X'.
APPEND i_fieldcat TO i_fieldcat.
CLEAR i_fieldcat.
i_fieldcat-col_pos = 1.
i_fieldcat-fieldname = 'TXT20'.
i_fieldcat-seltext_m = 'Description'(002).
APPEND i_fieldcat TO i_fieldcat.
CLEAR i_fieldcat.
ENDFORM. "field_cat1
*& Form field_cat
text
-->XV_BURKS text
FORM field_cat USING xv_burks TYPE char4.
lv_count = lv_count + 1.
i_fieldcat-col_pos = lv_count.
CONCATENATE 'CO_' xv_burks INTO i_fieldcat-fieldname.
i_fieldcat-seltext_m = xv_burks.
i_fieldcat-just = 'C'.
i_fieldcat-no_zero = 'X'.
i_fieldcat-do_sum = 'X'.
APPEND i_fieldcat TO i_fieldcat.
CLEAR i_fieldcat.
ENDFORM. "field_cat
Edited by: dhanashree wadkar on Apr 30, 2008 6:00 AM -
OBIEE 10g AGO Function Dynamically Change the Heading
I created columns in my rpd named Sales Previous Month, Sales 2 months ago and Sales 3 months ago using the AGO Function. This is working fine.
My problem is when displaying these headings the users would like to see the Month Name instead of the Headings I created. For example if looking at a report for January the users would like to see:
Sales Previous Month = December
Sales 2 Months ago = November
Sales 3 Months ago = October
Is there any way to dynamically change the value of the column header to show the name of the month?Hi SriniVEERAVALLI,
Thanks for the reply. I have found that I might haven't created the relationship between dimension and fact tables correctly.
I initially created the foreign key relationship (instead of creating complex join) in physical diagram between the dimension and fact table. And the relationship type is hence greyed out.
I have deleted the foreign key relationship in physical diagram. Then
1. In physical diagram, create complex join between dimension and fact . The relationship is 'inner' and can't be changed.
2. In Logical table diagram, create foreign key between dimension and fact . The relationship can be changed (inner, outer, etc).
Is this the correct way?
I tried these on two newly created dummy tables and it worked. -
CSS issue when changing the table row height to 16px
Hello,
After changing the table row height through css like this:
.table-row-cell, .table-cell {
-fx-cell-size: 16;
the table rows are correctly displayed with a 16px height but the cell bottoms seem to be incorrectly set.
For example the following css style (a red 3px bottom border):
.table-cell {
-fx-border-width: 0 0 3 0;
-fx-border-color: red;
doesn't work anymore with the new row height whereas it works with the 24px standard row height.
While investigating with Scenic View, I noticed that changing the row height changes the TableRow layoutBounds height (from 24px to 16px so that's ok) but not the boundsInParent height which remains to 27px. I think it should become 19px (16 + 1.5 + 1.5). I don't know if it's a bug.
Anyway, any help making the css red border working for a 16px row height would be greatly appreciated.
Regards,
Bruno.Q: Would this help to just use absolute div tags and give me 'ABSOLUTELY ABSOLUTE' positioning?
No. APDivs are not a good primary layout method. Use default CSS positioning (which is no positioning at all). Align page elements with margins, floats and padding.
See example -- 2-Column CSS Layout with Grids
(View Page Source in your browser to see the code)
http://alt-web.com/TEMPLATES/2-col-fixed-with-grid.shtml
Nancy O.
Alt-Web Design & Publishing
Web | Graphics | Print | Media Specialists
www.alt-web.com/
www.twitter.com/altweb
www.alt-web.blogspot.com -
Dynamic output & input fields in the table control
HI Guys,
How can one change the attribute of input field to output field basically greying of field) dynamically
based on the some flag. Loop at screen does not work. I need to change the attributes
of field 'outfiled' and output field display only'.
Any help is highly appreciated.
Regards,
HarshaHi Harsha,
I generated a table control (ERP 6.2) and somewhere I found the coding like this (the name of the table control is TABLE_CONTROL):
*&spwizard: output module for tc 'TABLE_CONTROL'. do not change this lin
*&spwizard: get lines of tablecontrol
module TABLE_CONTROL_get_lines output.
g_TABLE_CONTROL_lines = sy-loopc.
If I do a loop at the screen at this place, I can control the individual input/output for the screen fields (the table fields). In my work area (WA_CONTROL) I can see the actual value of fields. Depending on this, I choose to enable/disable input via:
loop at screen.
if wa_control-material <> ' '.
screen-input = '0'.
modify screen.
endif.
endloop. -
Hi
we are facing some problem in Dynamic Changing the LOV.
Lets assume the below scenario.
I have tables like location and department table.
In location table i have values like country name and location. For one country there will be multiple locations.
First i need to show the unique country names in LOV. based on the country selection i need to show locations.
all we need to achieve in same page meaning i have two lovs in one page. first one is country and second one is locations.
pls. help us to resolve this issue.Why wouldn't you put two items (visible=no) on page; first of them with "select distinct..." of country on record group for LOV1 and the second with LOV2 with locations, depending of values in item1 where you took value from LOV1?
-
How to change the table's for an existing report
Hello,
How can I change the table names for reports created with a different table name? for e.g If I created a report which included a table called "2009_10_example", How can I change that table to a different table "2010_10_example1".
I am using Crystal reports 2008, and the reports were created using Report Creating Wizard.
Thanks,
AbhishekIn the Database Menu, there is an option Set Datasource Location. This allows you to pick a table from the current tables used, and select a table to replace it with. Press the Update button, and Crystal will swap one for the other. If the field names and data types are all the same, it will automatically change all references throughout the report to the new table's fields.
May I suggest that your tables are set up improperly if you have to change report code to run it for different months? The data should all be in one table with dates, and parameters to select the date range to report on. (That was said in the spirit of helping...)
HTH,
Carl -
How to dynamically change the text of a TextObject with embedded DataField?
Hi
I'm trying to dynamically change the text of a TextObject at runtime, by using the .NET library. My problem is that if one or more DatabaseFieldDefinition is embedded inside my text, I'm unable to change the "static text" only, by keeping the field, e.g. I have :
Text1 => "Contact Name: {Contact.Name}"
and I'd like to change it to anything else like:
Text1 => "Nom du Contact: {Contact.Name}"
Half of my TextObject is static text while second part comes from the dataset.
(of course the translation is dynamic - it is called at run-time and the new value to be set depends on the calling application language)
If I simply modify the Text property of my TextObject, the {Contact.Name} embedded field is not evaluated anymore by the Crystal Engine, but considered as a single text.
Using formulas or parameters looks quite difficult, because it means having many ones just for translation needs - I cannot control the way my users will create their reports and "force them" to use complex methods just in order to put a text and a value together...
Anyone knows how to deal with that ?Only way I can think of doing this:
1) Create a formula (call it lang) and enter the string "Contact Name" in it
2) Place the {Contact.Name} field next to the string
3) So now you have:
ContactName: {Contact.Name}
4) Check what localization you are after. If you need "Nom du Contact", change the lang formula so it shows "Nom du Contact" using the code below:
Imports CrystalDecisions.CrystalReports.Engine
Imports CrystalDecisions.Shared
Public Class Form1
Inherits System.Windows.Forms.Form
Dim Report As New CrystalReport1()
Dim FormulaFields As FormulaFieldDefinitions
Dim FormulaField As FormulaFieldDefinition
Private Sub Form1_Load(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles MyBase.Load
FormulaFields = Report.DataDefinition.FormulaFields
FormulaField = FormulaFields.Item(0)
FormulaField.Text = "[formula text]"
CrystalReportViewer1.ReportSource = Report
End Sub
I realize this may not give you consistent spacing as the translations may have strings of differnt length. Perhaps someone has other idea(s)... -
Dynamically change the Binding of a view object
I want to reuse a panel several times in my application. The VO has one bind parameter (:1). The same panel should be reused several times with different bind variables.
I found a technical note concerning this issue called: How to Dynamically Change the binding of a View Object to a JClient Panel. This works for JDeveloper 9i but not for JDeveloper 19g. Does anybody know how to dynamically change the binding in JDeveloper 10gYou may use bindRowSetIterator() and pass in a custom fetched ViewObject or a RowSetIterator to the iterator binding that is displayed in your panel.
-
Add change Icon in the Table Control tool bar.
Hi Abapers,
I need to add "change" icon in the table control. I added it but when I click on it is not working.
My requirement is that when I run my custom report, all the fields should be shown is in display mode. Then when I click on the "change" icon, all fields should be enabled for change.
I have already referred to the standard progs BCALV_* but it does not have the "change" icon.
plz give me any reference prg or sample code.
Thanks
Nani.Hi Nani,
Track the function code of change icon in user command. if it is clicked then put a flag eq X.
check that flag in PBO, if it is eq X then screen-input = 1 or vice versa.
try this code:
in PBO:
LOOP AT SCREEN
IF WS_EDIT = 'X'
SCREEN-INPUT = 1
ELSE
SCREEN-INPUT = 0
ENDIF
MODIFY SCREEN
ENDLOOP
Hope it will work fine
Regards
Krishnendu -
Dynamically changing the name of the .dll file to load in call Library
Our current model is to use dll files as "plug-in" modules for instruments and a top layer test step calls the appropriate driver dll.
For instance
the TestStep is called with the kenmore.dll passed as a parameter so the kenmore.dll file is loaded, the functions are registered and the functions are called. Next the TestStep is called with whirlpool.dll as a parameter now the whirlpool.dll is loaded the functions are registered and the functions are called. This works very well in our current CVI/LabWindows environment. Now we plan to work with LabView, we wish to retain this model (as DLL files, there are advantages in our model for us). We have not found a way to load these dll files from LabView without hard coding the path and filenames in.
Any suggestions on how to dynamically change the path in the Call Library module, or another suggested method of loading the dll via LabView?
Thanks,John Stuart wrote:
Our current model is to
use dll files as "plug-in" modules for instruments and a top layer test
step calls the appropriate driver dll.
For instance
the TestStep is called with the kenmore.dll passed as
a parameter so the kenmore.dll file is loaded, the functions are
registered and the functions are called. Next the TestStep is
called with whirlpool.dll as a parameter now the whirlpool.dll is
loaded the functions are registered and the functions are called.
This works very well in our current CVI/LabWindows environment.
Now we plan to work with LabView, we wish to retain this model (as DLL
files, there are advantages in our model for us). We have not
found a way to load these dll files from LabView without hard coding
the path and filenames in.
Any suggestions on how to dynamically change the path in the Call
Library module, or another suggested method of loading the dll via
LabView?
Thanks,
As Ben has pointed out LabVIEW
scripting may be a possibility but you are going with that in highly
unsupported area. Also I happen to know that changing the library name
of a Call Library Node through scripting has produced unsupported
feature errors previous to LabVIEW 7.1 eventhough the method was there.
And LabVIEW 8 hides the whole scripting business behind the license
manager.
Another approach at least if the different DLLs do not change to often
thier functions and parameters would be to create a wrapper DLL. Have
it a method that loads the desired DLL and links its functions to
internal function pointers. Then when calling the actual function entry
points just redirect directly to the correct fucntion through that
function pointer. Since you are already working in CVI creating such a
DLL should be only a matter of taking out a little bit of your already
existing code and put it into a DLL project.
Rolf Kalbermatter
Message Edited by rolfk on 04-12-2006 07:40 AM
Rolf Kalbermatter
CIT Engineering Netherlands
a division of Test & Measurement Solutions
Maybe you are looking for
-
Hi All, Greetings. I have two queries namely, 1.Query for cancelled requisitions and 2.Query for Internal Requisitions without Internal Sales Orders. I was on a task to combine those two queries.. Can we do that? if so, please help me do that.. Thank
-
Hi everyone, its my first time using time machine, i want to change from lion to mavericks, but i want to know how that actually works, and if i back up my stuff from lion would it match and would mavericks know what am trying to do here !?.... like
-
ITunes Slow Writing ID3 Tags From External Drive
When adding files (music) located on my WD External Hardrive, and upon trying to add the album art, the process slows down... a lot. As opposed to when I add filed on my internal hardrive (from my laptop directly), which is a lot faster (seconds wher
-
No unpaid tax lines exist for the given selection criteria while+J1inchln
Hi All, While doing J1inchln I am getting following error. No unpaid tax lines exist for the given selection criteria. Message no. 8I702 Diagnosis The corresponding withholding tax line &1& is not present in WITH_ITEM table. System Response For withh
-
hi, I ma trying to call ABAP proxy. when looking in the queue i see 2 kind of errors: 1)SYSFAIL - Screen output without connection to user. 2)CPICERR - connection closed (no data) any help ?!