Dynamically change the Priority Group of Logical Table Sources in OBIEE 11g

Hi All,
I have 2 Logical Table Sources(LTS 1 and LTS 2 for a Logical Table in BMM Layer).
Example: Logical Table : Sample
LTS Source 1 : Sample 1(Priority Group Set to 1)
LTS Source 2 : Sample 2(Priority Group Set to 0)
I have set the Priority Group of Sample 1 LTS Source to 1 and Priority Group of Sample 2 LTS Source to 0.
I need to dynamically change the Priority Group of Sample 1 LTS Source to 0 if my role is DEVELOPER where role is a column in database.
If my role is not equal to DEVELOPER then the Priority Group of Sample 1 LTS Source will remain same(1).
Please suggest how can i achieve this.
Thanks,
Soukath Ali

hello Soukath Ali,
didi you find a way to dinamically changing Priority Group?
thanks,
Maria Teresa Marchetti

Similar Messages

Dragging the columns to existing logical table source.....

Hi,
I am just learning OBIEE 11g and I am using a turorial from oracle it is
"Creating a Repository Using the Oracle BI 11g Administration Tool" for practice purpose.
In this tutorial it is saying that drag that columns from phscial layer to Logica Table Source
in BMM Layer to avoid creating a second logical table source.. But when I am trying to drag the columns to
existing logical source it is disabling I mean which it is not allowing .. is there any other technique to
do it... or Am i wrongly approaching.. .The below is brief description in the
tutorial.
"Drag all six columns from D50 Sales Rep in the Physical layer to D5 Sales Rep in the BMM layer. This action
creates logical columns and adds a D50 Sales Rep logical table source to D5 Sales Rep.
Rename the D50 Sales Rep logical table source to LTS1 Sales Rep.
In the Physical layer, expand D52 Sales Rep Position.
Drag POSTN_DESC and POSTN_LEVEL from D52 Sales Rep Position to LTS1 Sales Rep. Note that you are
dragging the columns to the logical table source, not the logical table. Dragging to the logical table would create a
second logical table source.
Drag DISTANCE from D51 Sales Rep Parent Child to LTS1 Sales Rep. Again, you drag the column to the logical
table source, not the logical table."
help would be appreciated.
Thanks and Regards,
Sri_Oracle.

Hi Sri,
When you are dragging a physical column onto an existing Logical table source and if it does not let you do so, then it means that there is no physical join between the existing physical table(which the logical source is pointing to already) and new physical table (from which you are dragging the column now). So, please make sure, you have the join in place.
Hope this helps.
Thank you,
Dhar

Can we change the Record Group Type through Custom.pll

Hello All,
I have a small requirement on Changing the Record Group Dynamically.
Can i set the Record group type to 'Query' from 'Static'. i.e Can i change the Record group type dynamically through custom.pll. I know that we can dynamically change the Record group query.
Please help me its a bit urgent.
Thanks inadvance,
Amarnadh Js

you can control your record group runtime without create any recordgroup at design time..
1.static group
declare
   rg_name         VARCHAR2 (40) := 'Global_Rgp_Menu';     --global record group name for menu use
   rg_id           recordgroup;                                            --global record group id
   gc_id           groupcolumn;                                     --global record group coulmn id
   errcode         NUMBER;                                                             --error code
   grp_row         PLS_INTEGER    := 0;                             --global record group row count
begin
rg_id := FIND_GROUP (rg_name);
   IF NOT ID_NULL (rg_id)
   THEN
      DELETE_GROUP_ROW (rg_id, all_rows);
   ELSE
      rg_id := CREATE_GROUP (rg_name, global_scope);
      gc_id := ADD_GROUP_COLUMN (rg_id, 'menu_item', char_column, 100);
      gc_id := ADD_GROUP_COLUMN (rg_id, 'p_type', char_column, 100);
      gc_id := ADD_GROUP_COLUMN (rg_id, 'p_no', char_column, 100);
   END IF;
grp_row := 0;
for 1 in 1..10 loop
       grp_row := grp_row + 1;
      ADD_GROUP_ROW (rg_id, grp_row);
      SET_GROUP_CHAR_CELL (rg_name || '.menu_item', grp_row, 'menu' || to_char(i) );
      /*type*/
      SET_GROUP_CHAR_CELL (rg_name || '.p_type', grp_row, 'type' || to_char(i) );
      /*program_no */
      SET_GROUP_CHAR_CELL (rg_name || '.p_no', grp_row, 'programno' || to_char(i) );
end loop;
end;
2. query group
declare
   FACT_SQL VARCHAR2(500) :=NULL;
   rg_name1       VARCHAR2(40) := 'Global_Rgp_fact';
   rg_id1   RecordGroup;
   Error_Flag number:=0;
   group_error exception;
begin
   rg_id1 := Find_Group( rg_name1 ); IF NOT Id_Null(rg_id1) THEN Delete_Group( rg_id1 ); END IF;
   FACT_SQL := ' SELECT *   FROM MYFACTORY ' ;
   rg_id1 := Create_Group_From_Query( rg_name1,FACT_SQL ,global_scope);
    Error_Flag := POPULATE_GROUP(rg_id1);
    IF Error_Flag <>0 THEN
           error_msg:='Error while populating factory group';
           raise group_error;
    END IF;
exception
when group_error then
     message(error_msg);
    raise;
end;Edited by: nolemlin on 2010/3/23 上午 7:50

[nQSError: 15018] Incorrectly defined logical table source

Hi,
I have two fact tables and a type dimension.
business model / physical
fact1 /fact1
fact2 /fact2
type /type
now I have them joined up on the physical layer with foreign keys AND on the business model layer.
Nevertheless I still get this error whenever I mix and match the columns.
[nQSError: 10058] A general error has occurred. (for fact table WABFact) does not contain mapping for [Dates.FLIGHTDATE [ ] ]. (HY000)

Hi,
The error "Incorrectly defined logical table source (for fact table XXX) does not contain mapping for YYY" means that the BI Server cannot reach from table XXX to table YYY. It can happen because of two reasons: The first one is that there are no relationships defined in the logical or the physical layers (or maybe both). Note that the connections can be indirect. The second one is that the relationships doesn't makes sense. For example, going from a fact table to a dimension table through many-to-many table cannot happen. You'll see this error many times as a beginner and it can be quite frustrating at first. You need to understand that the BI Server can only understand simple and classic star schemas. More complex ERDs need to be split by using alias tables.
Thanks to-Miki
Regards
MuRam

OBIEE 10g AGO Function Dynamically Change the Heading

I created columns in my rpd named Sales Previous Month, Sales 2 months ago and Sales 3 months ago using the AGO Function. This is working fine.
My problem is when displaying these headings the users would like to see the Month Name instead of the Headings I created. For example if looking at a report for January the users would like to see:
Sales Previous Month = December
Sales 2 Months ago = November
Sales 3 Months ago = October
Is there any way to dynamically change the value of the column header to show the name of the month?

Hi SriniVEERAVALLI,
Thanks for the reply. I have found that I might haven't created the relationship between dimension and fact tables correctly.
I initially created the foreign key relationship (instead of creating complex join) in physical diagram between the dimension and fact table. And the relationship type is hence greyed out.
I have deleted the foreign key relationship in physical diagram. Then
1. In physical diagram, create complex join between dimension and fact . The relationship is 'inner' and can't be changed.
2. In Logical table diagram, create foreign key between dimension and fact . The relationship can be changed (inner, outer, etc).
Is this the correct way?
I tried these on two newly created dummy tables and it worked.

Dynamic changing the LOV

Hi
we are facing some problem in Dynamic Changing the LOV.
Lets assume the below scenario.
I have tables like location and department table.
In location table i have values like country name and location. For one country there will be multiple locations.
First i need to show the unique country names in LOV. based on the country selection i need to show locations.
all we need to achieve in same page meaning i have two lovs in one page. first one is country and second one is locations.
pls. help us to resolve this issue.

Why wouldn't you put two items (visible=no) on page; first of them with "select distinct..." of country on record group for LOV1 and the second with LOV2 with locations, depending of values in item1 where you took value from LOV1?

How can we change the purchasing group which it is maintained in R/3?

Hello All.
In case of MM, purchasing group is assigned to material master.
It means purchasing group is maintained based on material code.
But SRM has different maintenance level.
As you know that purchasing group has the responsibility based on material group (Product category).
So we should change the purchasing group from R/3, when end user create shopping cart.
How can we change the purchasing group which it is maintained in material master?
Thank you,
Best regards,
SH.

Hello So Hee,
I am not a technical guy.
But for your requirement i am building a logic.
I am not sure whether it will work.
You need to check with your ABAPER.
It is as below:
When the SC is approved and the other configuration is correct ,
PR is created in ECC by the virtue of BAPI.
You want that the pur grp should be populated on the base of matl code and not on matl grp.
Hence in SC you will not fill up pur grp.
In the programme for BBPSC01 i.e. SC creation you will add modification that it will call a custom FM.
This custom FM will get the matl code from SC and will find the value of pur grp from R/3 MM01i.e. matl master(you may get in MARA).
Now in the BAPI you need to incorporate this additional value of yr pur grp field.
So the desired pur grp as per yr R/3 matl master will be populated in yr R/3 PR.
Again: this is all hypothesis.
That's all I can help you.
BR
Dinesh
<b>Reward if helps</b>

Dynamic change the ALV layout

Alle experts:
In ALV layout report, how to dynamic change the layout int ABAP porgram?
e.g. I have save 5 layout, I need to change them base the my selection in ABAP program? How to do this?
Thanks in advance!

Try to call fieldcatlog dymnamically. Refer tofollowing code. Reward if helpful.
REPORT zfir0001 MESSAGE-ID ztax.
                           Tables
TABLES : glt0, t001, skat.
                      Internal Tables
DATA: BEGIN OF itab OCCURS 0,
        racct               LIKE   glt0-racct,    "Account number
        txt20               LIKE   skat-txt20,    "G/L account short text
        co_1000          LIKE     glt0-hslvt,     "Balance carried forward for company code 1000
        co_1100          LIKE     glt0-hslvt,     "Balance carried forward for company code 1100
        co_1200          LIKE     glt0-hslvt,     "Balance carried forward for company code 1200
DATA : BEGIN OF itab1 OCCURS 0,
         bukrs LIKE glt0-bukrs,
         waers LIKE t001-waers,
       END OF itab1.
DATA : BEGIN OF it_itab1 OCCURS 0.
        INCLUDE STRUCTURE glt0.
DATA : END OF it_itab1.
                      Data Declarations
DATA : w_total   LIKE glt0-hslvt,
       w_count   LIKE glt0-bukrs,
       w_flg     TYPE c,
       lv_count TYPE i.
      w_slash   TYPE c VALUE ' '.
                      Selection screen
SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME TITLE tit1.
SELECT-OPTIONS : s_bukrs FOR glt0-bukrs OBLIGATORY,
                 s_racct FOR glt0-racct OBLIGATORY,
                 s_ryear FOR glt0-ryear OBLIGATORY,
                 s_rldnr FOR glt0-rldnr OBLIGATORY.
SELECTION-SCREEN END OF BLOCK b1.
INITIALIZATION.
tit1 = 'Please select:'(004).
TYPE-POOLS: slis.                                 "ALV Declarations
DATA: i_fieldcat TYPE slis_t_fieldcat_alv WITH HEADER LINE,
        gd_tab_group TYPE slis_t_sp_group_alv,
        gd_layout    TYPE slis_layout_alv,
        gd_repid     LIKE sy-repid.
********Geting the selected company code in table itab1****
START-OF-SELECTION.
IF NOT s_bukrs-high IS INITIAL.
    itab1-bukrs = s_bukrs-low.
    APPEND itab1.
    w_count = s_bukrs-low.
    DO.
      IF s_bukrs-high = w_count.
        EXIT.
      ELSE.
        w_count = w_count + 1.
      ENDIF.
      SELECT SINGLE * FROM t001
          WHERE bukrs = w_count.
      IF sy-subrc = 0.
        itab1-bukrs = w_count.
        APPEND itab1.
        CLEAR itab1.
      ENDIF.
    ENDDO.
ELSE.
    itab1-bukrs = s_bukrs-low.
    APPEND itab1.
ENDIF.
SELECT * FROM glt0 INTO CORRESPONDING FIELDS OF TABLE it_itab1
          WHERE rldnr   IN s_rldnr
          AND   bukrs   IN s_bukrs
          AND   ryear   IN s_ryear
          AND   racct   IN s_racct.
SORT it_itab1 BY bukrs.
LOOP AT it_itab1.
    AT END OF racct.
      w_flg = 'X'.
    ENDAT.
    SELECT SINGLE txt20 INTO (itab-txt20) FROM skat
              WHERE spras = sy-langu
              AND   saknr = it_itab1-racct.
    PACK it_itab1-racct TO it_itab1-racct.
    itab-racct = it_itab1-racct.
    w_total = it_itab1-hsl01 + it_itab1-hsl02 + it_itab1-hsl03 + it_itab1-hsl04 +
              it_itab1-hsl05 + it_itab1-hsl06 + it_itab1-hsl07 + it_itab1-hsl08 +
              it_itab1-hsl09 + it_itab1-hsl10 + it_itab1-hsl11 + it_itab1-hsl12 +
              w_total        + it_itab1-hslvt.
    IF w_flg = 'X'.
      READ TABLE itab1 WITH KEY bukrs = it_itab1-bukrs.
      IF sy-subrc = 0.
        SELECT SINGLE * FROM t001
            WHERE bukrs = itab1-bukrs.
        IF t001-waers = 'JPY' OR
           t001-waers = 'HUF'.
          w_total = w_total * 100.
        ENDIF.
        CASE it_itab1-bukrs.
          WHEN '1000'.
            itab-co_1000 = w_total.
          WHEN '1100'.
            itab-co_1100 = w_total.
          WHEN '1200'.
            itab-co_1200 = w_total.
        ENDCASE.
        COLLECT itab.
        CLEAR: itab, w_flg, w_total.
      ENDIF.
    ENDIF.
ENDLOOP.
SORT itab BY racct.
IF NOT itab[] IS INITIAL.
    PERFORM field_cat1.
    lv_count = 1.
    LOOP AT itab1.
      PERFORM field_cat USING itab1-bukrs.
    ENDLOOP.
    PERFORM display_alv_report .
ELSE.
    MESSAGE s000 WITH 'No records Found'(003).
ENDIF.
*&      Form display_alv_report
      text
FORM display_alv_report .
gd_repid = sy-repid.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
    EXPORTING
      i_callback_program = gd_repid
      is_layout          = gd_layout
      it_fieldcat        = i_fieldcat[]
      i_save             = 'X'
    TABLES
      t_outtab           = itab
    EXCEPTIONS
      program_error      = 1
      OTHERS             = 2.
ENDFORM.                    "display_alv_report
*&      Form field_cat1
      text
FORM field_cat1 .
i_fieldcat-col_pos     = 0.
i_fieldcat-fieldname   = 'RACCT'.
i_fieldcat-seltext_m    = 'Account'(001).
i_fieldcat-fix_column = 'X'.
i_fieldcat-emphasize   = 'X'.
APPEND i_fieldcat TO i_fieldcat.
CLEAR i_fieldcat.
i_fieldcat-col_pos     = 1.
i_fieldcat-fieldname   = 'TXT20'.
i_fieldcat-seltext_m    = 'Description'(002).
APPEND i_fieldcat TO i_fieldcat.
CLEAR i_fieldcat.
ENDFORM.                                                    "field_cat1
*&      Form field_cat
      text
     -->XV_BURKS   text
FORM field_cat USING xv_burks TYPE char4.
lv_count = lv_count + 1.
i_fieldcat-col_pos     = lv_count.
CONCATENATE 'CO_' xv_burks INTO i_fieldcat-fieldname.
i_fieldcat-seltext_m    = xv_burks.
i_fieldcat-just = 'C'.
i_fieldcat-no_zero = 'X'.
i_fieldcat-do_sum = 'X'.
APPEND i_fieldcat TO i_fieldcat.
CLEAR i_fieldcat.
ENDFORM.   "field_cat
Edited by: dhanashree wadkar on Apr 30, 2008 6:00 AM

How to change the account group of a customer master?

Would like to change Ship-to's to Sold-to's. I know the transaction XD07, but when trying to promote a SH to SP, I receive the error
The planned change is not allowed as the following field groups would be masked by the new account group.
Below the error the table displays Group Name PO Box City and Address.
How do i bypass this and successfully change the ship-to to a sold-to?

Hi ,
Chek out ur new account group for Sold to party ,whether all the fields in address tab is marked either optional /required. It should not be in display /supress mode then only u can successfully change ur SH account to SP account.
I think , Number ranges should be same.
if itz not da same number range system will give the message ,but it will allow to change the account group.
As I successfully worked in this issue earlier.
As we all know, we only change the account group from lower to heigher,
ie. sh,bp,py to SP only not viceversa.
*rewards if it helps

Dynamically changing row color in an ADF table?

Hi,
I am using Build JDEVADF_11.1.1.3.PS2_GENERIC_100408.2356.5660. Can anyone please let me know the code for dynamically changing the row color of an ADF table?
Thanks,
Vik

well you can use EL on af:column inlineStyle property to change the color on condition
e.g
inlineStyle='#{(row.SelectedRow)?"background-color: Silver":""};a example can be found here it is changing color based on Checkbox selection http://baigsorcl.blogspot.com/2010/06/deleting-multi-selected-rows-from-adf.html

Want to change the Material group in Scheduling aggrement after creation?

Hi Gurus,
I want to change the Material Group in scheduling aggrement. I am able to change in PO but i m not able to change in Scheduling aggrement. It is in display mode after creation.
I have checked the SPRO setting it is in optional entry only.
Can anyone please help me. Wr we have to check the settings..
Ot this is Standard SAP has provided.
Please help me..
Thanks
Venkatesh P

Hi,
Thanks for your reply.
EKPO is standard table. That we cannot change and that do end user want to chagne the material group.. This is not for one time.
Please help..
Thanks
Venkatesh P

How do i use WGM or dcsl to change the primary groups of users, defined by another group?

i've got a ton of users, whose primary group is "current student". they all belong to the other group "year 13"
they've left school, so i thought it would be easy to do a search of users with GID equal to or containing the GID for "year 13" (in this case 1121) and then change their primary group to "left school"
except that doesn't work. i can only search for them in WGM by primary group, it seems. therefore i cannot do any batch operations on a secondary group.
so. how do i do this? is there a way of scripting dcsl to find users by 'other group' and then change the primary group attribute?
i'm going to need to be doing a lot of this (changing the other gropus of a school full of students). bit stumped.
help!

ok. for some reason neitehr root nor my account (which is part of the open directory admin group) can make changes using dscl.
when addingremoving users from groups, remember that teh UUID has to be added/removed too
this is getting there:
old=year11
new=year12
for item in `dscl /LDAPv3/127.0.0.1/ read /Groups/$old GroupMembership | cut -d: -f2`
do
echo $item
UUID=`dsmemberutil getuuid -U $item`
case "$UUID"
          in
          "There is no uuid for user $item")
                    echo "user $item need personal attention"
                    dscl -u diradmin -P 'somepassword' /LDAPv3/127.0.0.1 append /Groups/$new GroupMembership $item
                    dscl -u diradmin -P 'somepassword' /LDAPv3/127.0.0.1 append /Groups/$new GroupMembers $UUID
                    if [ "`dsmemberutil checkmembership -U $item -G $new`" == "user is a member of the group" ] ; then
                    echo "$item added to $new"
                    dscl -u diradmin -P 'somepassword' /LDAPv3/127.0.0.1 delete /Groups/$old GroupMembership $item
                    dscl -u diradmin -P 'somepassword' /LDAPv3/127.0.0.1 delete /Groups/$old GroupMembers $UUID
                              if [ "`dsmemberutil checkmembership -U $item -G $old`" == "user is a member of the group" ] ; then
                              echo "removal of $item from $old failed"
                              else
                              echo "removal of $item from $old succeded"
                              fi
                    else echo "append of $item to $new failed"
                    fi
          esac
done

Change the background color of a table created by ADDT (Login)

I am trying to change the background color of a table in the login form created by the developer's toolbox. I then go and select the table and change the background color. But it has no effect. The only insight I have is when I delete this "" from the Action in the form, then the table's background color changes. As far as I can tell this line of code is only return the url of the page.
I am not understanding something.
Does anyone have any insight?
Thanks!

the table is linked using a CSS rule..
the CSS rules comes from something called Skins..
see mxkollection2.css.
KT_XXX are the class ID's for table names.
if u change this rule it will effect all the tables which use that rule in ur whole website.
u can try switching skins from ADDT control panel.
KT_tngtable is the tables css rule name defined in skins /Skinname/tng.css
hope this helps u ..
mohnkhan
http://www.mohitech.com

How to dynamically change the text of a TextObject with embedded DataField?

Hi
I'm trying to dynamically change the text of a TextObject at runtime, by using the .NET library. My problem is that if one or more DatabaseFieldDefinition is embedded inside my text, I'm unable to change the "static text" only, by keeping the field, e.g. I have :
Text1 => "Contact Name: {Contact.Name}"
and I'd like to change it to anything else like:
Text1 => "Nom du Contact: {Contact.Name}"
Half of my TextObject is static text while second part comes from the dataset.
(of course the translation is dynamic - it is called at run-time and the new value to be set depends on the calling application language)
If I simply modify the Text property of my TextObject, the {Contact.Name} embedded field is not evaluated anymore by the Crystal Engine, but considered as a single text.
Using formulas or parameters looks quite difficult, because it means having many ones just for translation needs - I cannot control the way my users will create their reports and "force them" to use complex methods just in order to put a text and a value together...
Anyone knows how to deal with that ?

Only way I can think of doing this:
1) Create a formula (call it lang) and enter the string "Contact Name" in it
2) Place the {Contact.Name} field next to the string
3) So now you have:
ContactName: {Contact.Name}
4) Check what localization you are after. If you need "Nom du Contact", change the lang formula so it shows "Nom du Contact" using the code below:
Imports CrystalDecisions.CrystalReports.Engine
Imports CrystalDecisions.Shared
Public Class Form1
Inherits System.Windows.Forms.Form
Dim Report As New CrystalReport1()
Dim FormulaFields As FormulaFieldDefinitions
Dim FormulaField As FormulaFieldDefinition
Private Sub Form1_Load(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles MyBase.Load
FormulaFields = Report.DataDefinition.FormulaFields
FormulaField = FormulaFields.Item(0)
FormulaField.Text = "[formula text]"
CrystalReportViewer1.ReportSource = Report
End Sub
I realize this may not give you consistent spacing as the translations may have strings of differnt length. Perhaps someone has other idea(s)...

Is it possible to change the priority of emails in my income folder?

Hey everyone?!
I want to change the priority of mails in my income folder.

You could put a "flag" on it for high priority and then filter by flagged mails. More generally, you can create a "smart mailbox" (Mailbox menu) and use it to filter the high priority messages.

Dynamically change the Priority Group of Logical Table Sources in OBIEE 11g

Similar Messages

Maybe you are looking for