Dynamically crete component with out se80. Using SAP'scode.

Hi,
Can any one guide me to the code which get triggered when we try to create a component from SE80.
I have tried to debug but could not able to find the exact location and the variable whch it is taking the component name , window name  etc....
Please guide me. I have write a progrram which will create a component without  se80. Just one execution of the custom program that will create the WD component with given input.
Points will be given.

Re: Standard Table to store the WebDynpro Details
Edited by: Abhimanyu Lagishetti on Sep 2, 2008 12:46 PM

Similar Messages

  • What is the best way to follow the scenario for Out look integration with share point using SAP Gateway?

    1)what is the best way to follow the scenario for Out look integration with share point using SAP Gateway?
    2)workflow concepts for Purchase order?
    3)Email triggering from out look for an approval process of PO? how these scenario can be best implemented with updated functions in Duet Enterprise.

    Hi,
    I do not have much idea on gateway integration with outlook but found out this document GWPAM Workflow Template which can be helpful for you to start with.
    also you may want to post your question in SAP Microsoft Interoperability forum
    Regards,
    Chandra

  • HT1539 can i add my digital copy to itunes with out using the disk? my netbook does not have a disk drive and i want to add my movie to my ipod can i do it with out the use of the disk and just the code?

    Can I add my digital copy movie to my iTunes with out using the disk, my gateway laptop/netbook does not have a disk drive I have the unused code and everything, I just can't stuck the movie into the computer itself and my desktop computer has no internet on it. Is there a way to add my movie to my iPod touch 2nd generation tuning 4.2.1

    Hiya!
    It depends on what kind of digital copy you have.  This article goes ino details regarding the two types, and depending on the type you have, you may or may not need the DVD to redeem the code.
    Transferring video from DVDs with iTunes digital content
    http://support.apple.com/kb/HT1539
    I hope this helps!  Best wishes and good luck!

  • IDoc Split with out BPM using SplitByValue at the LineItem Level

    I have an Invoice idoc contains line item and identifier changes into groups, let's say A & B
    Using Message Mapping, Will i be able to Split into 2 IDOCs and combine A into one IDOC and B into Another IDOC and send it across to ECC with out using BPM?
    Btw the header is commom for both the IDOCs
    Source
    <Header>
    <headertext>headername</headertext>
    <lineItem>
    <item1>A</item1>
    <item2>B</item2>
    <item3>A</item3>
    <item3>B</item4>
    </item>
    </lineitem>
    </header>
    Target
    IDOC 1
    <Header>
    <headertext>headername</headertext>
    <lineItem>
    <item1>A</item1>
    <item2>A</item2>
    </item>
    </lineitem>
    </header>
    IDOC 2
    <Header>
    <headertext>headername</headertext>
    <lineItem>
    <item1>B</item1>
    <item2>B</item2>
    </item>
    </lineitem>
    </header>
    Any inputs are appreciated

    I actually gave wrong information on the source structure, I am trying to execute scenario with the given examples, meanwhile any help is appreciated
    <Header>
                   <Date>20100112</Date>
                   <Amount>10</Amount>
                   <No>20</No>
    </Header>
                <InvoiceItem>
                   <Line1>10</Line1>
                   <Line2>10</Line2>
                   <Amount>10</Amount>
                   <ActionIndicator>I</ActionIndicator>
                </InvoiceItem>
                <InvoiceItem>
                   <Line1>20</Line1>
                   <Line2>20</Line2>
                   <Amount>20</Amount>
                   <ActionIndicator>C</ActionIndicator>
                </InvoiceItem>
                <InvoiceItem>
                   <Line1>30</Line1>
                   <Line2>30</Line2>
                   <Amount>30</Amount>
                   <ActionIndicator>I</ActionIndicator>
                </InvoiceItem>
                <InvoiceItem>
                   <Line1>40</Line1>
                   <Line2>40</Line2>
                   <Amount>40</Amount>
                   <ActionIndicator>C</ActionIndicator>
                </InvoiceItem>
    Target 1
    <Header>
                   <Date>20100112</Date>
                   <Amount>10</Amount>
                   <tNo>20</No>
                   <ActionIndicator>I</ActionIndicator>
    </Header>
                   <InvoiceItem>
                   <Line1>10</Line1>
                   <Line2>10</Line2>
                   <Amount>10</Amount>
                </InvoiceItem>
                <InvoiceItem>
                   <Line1>30</Line1>
                   <Line2>30</Line2>
                   <Amount>30</Amount>
                </InvoiceItem>
    Target 2
    <Header>
                   <Date>20100112</Date>
                   <Amount>10</Amount>
                   <tNo>20</No>
                   <ActionIndicator>I</ActionIndicator>
    </Header>
                   <InvoiceItem>
                   <Line1>20</Line1>
                   <Line2>20</Line2>
                   <Amount>20</Amount>
                </InvoiceItem>
                <InvoiceItem>
                   <Line1>40</Line1>
                   <Line2>40</Line2>
                   <Amount>40</Amount>
                </InvoiceItem>
    I know the part of Splitting IDOC, which was executing correctly, with the external data type changes. Please advice

  • How to update password with out of use email address

    I have adobe digital editions on my desktop computer - it is authorized to an old out of use email. I can read books on the desktop.
    On my Note3 phone, I can log into adobe using my new current email but I can't open eBooks.
    I can't use the old email to log in because the password has to be verified with a confirmation email to that old non-existent address.
    How do I escape this conundrum?
    1) I would like to authorize my computer using my current email.
    2) I would like to authorize my new Note3 phone - so I can read my DRM protected books.
    Thanks.

    thanks for the website link. I still haven't quite figured out how to overcome this problem.
    How do I change my account email if I have forgotten my password. It's really a catch 22 since the new password is sent to my old and defunct email address. 
    Thanks for any help you can provide.
    Sent from Samsung Mobile

  • Is it possible to import my playlist from a different computer to anouther with out the use of a flashdrive?

    Is it possible to import a music library from one computer to anouter with out a flash drive or eny other forms of music storage?

    Connect both to the same network, transfer entire library from source machine to target by way of a shared folder.
    tt2

  • Performance Issue with Webi report uses SAP BI Query as the data source

    Hello.
    I have created a Webi ad-hoc report which connects to a SAP BI query through BO OLAP universe.
    The layout of Webi is the exactly the same as the BI query.  There are filters in the Webi to restrict the number of data extraction, but even with data result of 5000 rows, it took about 30 seconds.
    If I execute the BI query with the same filter restriction, it tooks less than 10 seconds.
    It seems that large percentage of time is consumed at the MDX part.
    Is there any tuning method that could speed up the process time of MDX?
    Thank you.
    Justine
    Edited by: Justine Liu on Mar 18, 2009 6:59 AM

    Hi,
    please take a look here:
    [https://service.sap.com/sap/support/notes/1142664] (Look under related notes)
    It includes references to various performance improvements of the MDX interface. From what I saw there it is advisable to upgrade your SAP BI (7.0)  up to at least Support Package 21 (you are currently on SP 15).
    This may also be interesting for you: There is a new Fix Pack 1.4 coming out for BOBJ XI 3.1. Combined with the related SAP Enh.Pack (not sure about the version of this one) should also improve WebI performance. This fix pack is not yet officially released though but it should not take look.
    I recommend that you try the upgrade to Support Package 21 first.
    BTW it is also advisable to take a look in the results of your MDX query (e.g using the MDXTEST transaction). You should make sure that your query is indeed restricted as expected. Sometimes the results you see in SAP native reporting tools (e.g. BEx Analyzer) differ from those returned from the MDX component, depending on the way variables/restrictions where defined in the query designer. It is all about making sure that there is no apples/oranges comparison here.
    Regards,
    Stratos

  • Error with crystal report using SAP GUI

    Hi,
    While using crystal report in sap gui i get the following error. I already googled and only found one thing on this forum that talks about this and it was never solve. Can you please help me? Thank you
    Errors in Crystal Reports Installation(SupportsSAPQuery)
    Message no.ALVHT218
    Diagnosis:
    This function requires that Seagate Crystal Reports and the Functional Area drivers(InfosetDrivers) from Seagate software are installed.
    This sotware is either not available on your frontend or has been installed with errors
    System Response:
    The action has been terminated
    Once again
    thank you

    Hi
    Please check if you have installed all the SAP transports which are required for Crystal Reports to run based off SAP.
    Regards
    Sourashree

  • How to encrypt byte array with out padding using RSA in Java?

    I've modulus and public exponent as byte[] array, so I'm trying to convert into BigIntegers and then create public key and then Cipher. Here is the example code:
    With this I'm always getting different encrypted bytes, is it because of padding. I dont want to use any padding so what parameter I need to pass along with RSA? I've modulus byte[] array size 64 bytes. I believe I'll get 64 encrypted bytes. I've content size of 32 bytes to be encrypted.
    --------code begin ---------------------------
    BigInteger bexponent = new BigInteger(pubExpo);
    BigInteger bmodulus = new BigInteger(modulus);
    KeyFactory keyFactory = KeyFactory.getInstance("RSA");
    RSAPublicKeySpec pubKeySpec = new RSAPublicKeySpec(bmodulus, bexponent);
    RSAPublicKey pubKey = (RSAPublicKey)keyFactory.generatePublic(pubKeySpec);
    Cipher c = Cipher.getInstance("RSA");
    c.init(Cipher.ENCRYPT_MODE, pubKey);
    return c.doFinal(content);
    --------code end---------------------------

    With this I'm always getting different encrypted
    bytes, is it because of padding. Yes, if you're using PKCS1Padding (which is the default in SunJCE if you don't specify it). Have a look at the PKCS1 spec if you haven't seen it already.
    http://www.rsasecurity.com/rsalabs/pkcs
    Section 7.2.1 talks about type 2 padding, which uses random bytes as the PS string.
    I dont want to use
    any padding so what parameter I need to pass along
    with RSA? NOPADDING. You should be able to find this out by look at the "Supported Paddings" parameter in your provider's database. Which of course, means you'll need to supply the right number of bytes to the Cipher.

  • Executing procedures with OUT parameters using Named notation

    I have a procedure with two out parameters (p_errortext and p_returncode) and i want to execute this proc in SQL*plus using named notation(using association operator ' => '). For position based execution i usually declare variables to hold the OUT parameter's value. But how can i do this while executing using named notation (using => )
    begin
         packagename.generate_ref_record(p_userid  => 'THELMA',
                                      p_ref_code       => '9A',
                                      p_item_id    => '9990000011163',
                                      p_shipno     => '0PH',
                                      p_errortext  =>  ??
                                      p_returncode =>  ??);
    end;

    SQL>variable x varchar2(30);
    SQL>variable y varchar2(30);
    SQL>exec packagename.generate_ref_record(p_userid  => 'THELMA',     
                                          p_ref_code       => '9A',       
                                          p_item_id    => '9990000011163',     
                                          p_shipno     => '0PH',     
                                          p_errortext  =>  :x        
                                          p_returncode =>  :y);

  • Dynamic CONNECT clause with AT DB_NAME USING?

    I am trying to figure out how in a PL/SQL script to connect to a DB dynamically in the script?
    I am not in a stored proc but a PL/SQL script so getting variables is cauing me some issue:
    I am want something like this:
    /* connect to the nondefault database */
    EXEC SQL CONNECT myuser IDENTIFIED BY mypassword
    AT DB_NAME USING (select new_dbname from mytable);
    I might even want the myuser and mypassword to come from a query as well.
    Thanks in advance for any help,
    Miller

    First, are you trying to build a SQL*Plus script? Or a PL/SQL script?
    A PL/SQL script would require a PL/SQL engine. There are two PL/SQL engines in the (public) world-- the one running in an Oracle database and the one that runs on the client side of old Oracle Forms applications. (There is a third PL/SQL engine that is used by a handful of folks in Oracle that runs outside the database and outside Forms, but I'm ignoring that). Since you're not using Oracle Forms, that means that you'd have to rely on an Oracle database's engine.
    If you've already connected to an Oracle database in order to run PL/SQL, you can't then go an connect to a different database other than via a database link...
    If you're trying to build a SQL*Plus script, that should be possible, but I'd question what business need you're trying to satisfy here... It would seem convoluted to have a SQL*Plus script connect to database A only to turn around and disconnect in order to connect to database B...
    Justin

  • How to execute dynamically created procedure with out parameter

    hi guys ,
    friend i have to execute a procedure whose name is going to change dynamically and this procedure is have 2 out parameter . I need to capture value of these 2 output parameter, here i m giving my code also ..
    declare
    v_emp_id int :=100013 ;
    p_reg_off varchar(5) := 'R' ;
    p_user_id int := 6 ;
    v_status varchar(200);
    v_message varchar (200);
    v_Formula varchar(100);
    v_number int := 1 ;
    begin
    v_Formula := 'Call testsp_'||v_number||'('||v_emp_id||','''||p_reg_off||''','|| p_user_id || ',v_status,v_message)' ;
    DBMS_OUTPUT.PUT_LINE( v_Formula);
    execute immediate v_Formula;
    end ;
    and my procedure structure is like this
    CREATE OR REPLACE PROCEDURE testsp_1
    p_emp_id INT,
    p_reg_off CHAR,
    p_user_id INT,
    p_status OUT NOCOPY INT,
    p_message OUT NOCOPY VARCHAR2
    AS
    begin
    end ;
    please help me .....

    The Complete Syntax for Execute Immediate is ::
    EXECUTE IMMEDIATE dynamic_sql_string
    [INTO {define_variable,... | INTO record_name}]
    [USING
    IN bind_argument,...]
    [RETURN[ING] INTO
    bind_argument,...];
    i think now it won't be a problem! ;)

  • Is the ICM (Internet Communication Component) is needed when using SAP PI ?

    Hi guys,
    I am aware that the ICM component is needed in SAP PI for various reasons (end-2-end monitoring, GRMG, etc).
    However, is that (ICM) component necessary when SAP PI need to exchange with an SAP (ECC) backend ?
    Is ABAP proxy need that ICM component ?
    Thank !
    A+

    Quite interesting blog like to share my views and like t get info also
    ICM on top of ICF is needed to communicate with Integration Server for determining logical routing and interface mapping and technical routing 
    Adapters do communicate with the help of ICM to IS
    In Case of HTTP as there is no adapter required, will directly communice to integration Engine pipeline of Integration server
    but in case ofHTTPS i think its required for communicating to IS
    similarly for IDOC and proxy too applies Somebody can correct me if my understanding is different
    Hope it clarifies you to some extent
    Rajesh

  • HT4112 how does one navigate with out the use of a mouse? do we still need to use finger to move to different things?

    how does one navigate the keyboard without a mouse. Do we still use finger to move from place to place?

    Yes you still need to use your finger to do all of the things that you need to use it for even if you use a wireless keyboard. You are merely adding a larger more robust keyboard to the device. You are not replacing the touch gestures features with the use of an external keyboard.

  • Can I transfer songs from my old itouch to a new one with out the use of the computer?

    I need to buy a new ipod becuase mine doesn't play music anymore so my question is: "Can I transfer my songs that I have purchased on to my new ipod without using the computer?"

    Click here and follow the instructions.
    (82257)

Maybe you are looking for