Dynpro and BW integration documentation and options

Hello,
I am looking for an initial document to review the integration options of Web Dynpro and BW, i.e. how to connect to it, what are the available options I have when I use Web Dynpro to connect to a BW and what are the cases that I will need to use Web Dynpro instead of the ready-made iViews in the portal for presenting BW reports.
Regards,
Roy

Hi Roy,
You can use the BI Java SDK to access BW queries in a WD application.
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/e49be590-0201-0010-0c83-fc20e5da124f
http://help.sap.com/saphelp_nw04/helpdata/en/6e/011e681cf74ab4b3acf73f77653405/frameset.htm
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/8596e590-0201-0010-db8c-984e018d0592
Regards, Anilkumar

Similar Messages

Integrating Web Dynpro and Portal

Hi people!
I'm starting the development of a simple web site in SAP Enterprise Portal. I created a simple web dynpro application to test the integration between web dynpro and SAP EP. I created a new folder and a new system in portal content. After I add a new page and a new iView (this iView open my webdynpro iview).
My Page open normally in SAP Portal Page Admin, now i would like to know how do for include the Portal Theme, Menu, Status Bar into to my page.
I investigated about wdPortalNavigation and wdPortalNavigationMode, but i don't understand very well how insert the Portal Navigation properties into my Page.
How do I insert this properties in my iView Code? or I should set this properties in Portal Admin?
Somebody have some e-books or tutorials to indicated?
Thanks in advance!!
Marcelo

Hi Marcelo,
First of all welcome to SDN....
For you Webdynpro pages to open with new THEME but not with default theme of portal you have to design new theme in portal and assign that theme to WebDynpro Components
for creation of THEMS please refer these Documents
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/ccb6bcf4-0401-0010-e3bc-ec0ef03e13d1
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/3ea0d790-0201-0010-80b8-b680496a3838
Please Reward Points if Helpfull...
Regards.
Vinit

Abap web dynpro and portal events

First off, a little introduction: My name is Martin Kroppen, I am an Abap developer for SAP Netherlands, and I am currently involved in a project for hospitals to built a portal. For this, I have created 2 Abap web-dynpros, and then impemented the views as iviews in an EP. What I want to achieve is that the input view triggers the display view on a second page, and the data is shown for the values in the input view (all in the same browser window).
I am using the portal integration manager for this, with the method for relative navigation.
The navigation is working fine, only problem is that I don't know how to handle the business parameters that I send over.
My questions are:
1. is this the correct way for navigating between abap webdynpro iviews in the portal?
2. what is the correct way to read the business parameters into my context of the second Abap WD application?
I tried the solution that is described below, I could not get it to work correctly.
If you define BUSINESS_PARAMETERS as application parameters in your Web
Dynpro application and the parameter names start with ″APP″, they will
automatically be forwarded to the startup plugs of the Web Dynpro application
provided they are marked as startup parameters. In this case, keep in mind that
the iView/page used as the navigation target must be assigned to the user role.
If it is not, navigation cannot be triggered.
Hope someone can help me
Regards
Martin Kroppen

Hi,
please refer to this link for portal integration
Web Dynpro for ABAP Portal Integration [original link is broken]

Web Dynpro and Abobe Flex

Hi Folks,
I've seen a couple of responses to questions about the mixing of Web Dynpro and Adobe Flex technologies...
This thread mentions a "Flex Client" which is reportedly able to render existing Web Dynpro apps in Flex: WebDynPro ABAP in adobe flex client
This thread mentions a technology called "Web Dynpro Islands" which is apparently Flex components within Web Dynpro apps: Flex with WebDynPro
These concepts seem very different to me - the first being a run-time solution to Flex rendering and the second, design-time. In my opinion, the Flex Client sounds like a more flexible (excuse the pun) solution as it allows the designer to concentrate on application functionality and leaves the visual styling to the GUI. Following on from this thought, the Flex Client gives an added benefit in that, if the person executing the app wants to view it in the current WD style as opposed to Flex, they have this option by choosing a different rendering tool/user interface... and the underlying WD app remains untouched!
Does anyone have any thoughts on this?
On a potentially negative side of the Flex Client technology, is the this client yet another GUI tool that needs to be rolled-out and maintained on users' PCs or will it simply be a plugin that can be downloaded on-the-fly and used in a web browser (in a similar way to an ActiveX control)?
I hope this stimulates some interesting discussions...
Cheers
Glen

Thanks Thomas! I was hoping you'd be around to shed some light on this...
You're explanation of the use of Web Dynpro Islands was very useful - I was assuming that any UI elements created for Flex designer could also be created as a Web Dynpro component for the Web Dynpro designer (ABAP or Java) but you make a good point that they have different capabilities.
I think, my biggest concern was that the visual style of the WD Island/Flex component would be so different to the the rest of the WD app that it would stick out like a sore thumb but if you use the Flex Client to render it, as you suggested, then every UI element in the app should look and behave consistently... another assumption...
This makes me wonder whether we'll need to use the Flex Client for all our portal apps to keep the look-and-feel consistent throughout the portal. There's nothing worse to a user than having one UI element behave a certain way in one app and a totally different way in another - eg. compare the scrolling functionality of the WD table element to the Flex table element.
I'll look forward to hearing more about the Flex Client in the near future.
Cheer
Glen

JAVA, JAVA WEB dynpro and possibility of JAVA workflow

Hi all
Just a take here -- I'm just getting some feelers on the way WF SHOULD be going in future.
Since starting to use the JAVA WD system and netweaver developer studio it seems that having to encapsulate a lot of NEW Workflows as ABAP objects is going "Backwards". (Note I said NEW not EXISTING applications)
I understand that some compatability with existing systems needs to be maintained but if your user is doing all his applications from a Portal you really need the WF's to be triggered from the portal via say WEB SERVICES.
I find I'm actually using the older ERP / ECC 6.0 R/3 systems these days purely as DATA repositories and from a JAVA program can often retrieve the data via standard BAPI's and RFC calls in a JAVA or Portal application.
Isn't it about time that the workflow system as a whole was made much more JAVA and PORTAL friendly --since this is where more and more people are doing their developments from.
Since switching more or less full time over to JAVA WEB DYNPRO developments the whole development time is completed MUCH QUICKER and with many many less mistakes.
ABAP Web dynpro is also OK but it's still a little bit of a nightmare compared with JAVA when you need a lot of WEB SERVICES.
Some WF's obviously will need to remain ABAP based but newer custom WF's IMO should be WEB DYNPRO and WEB SERVICE based.
I can't think of too many large organisations who aren't making more and more use of Portals these days -- so C'mon SAP -- provide some proper Web hooks into WF's instead of us having to go through hoops and rings of writing LAST CENTURY's code to get stuff to work through a Portal.
Cheers
jimbo

Hi,
Have you checked the new BPM tool that SAP is offering? I think that it is definately a big step into to the drection that you are describing. I haven't really checked all its features and the technology that is is based on, so I am not the biggest expert of this matter.
Check for example this article to get an overview: http://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/b06c49b2-ac63-2c10-3d8d-d17b817ba4ca?quicklink=nw-bpm&overridelayout=true
Of course it will be a long road before this new tool will (if it will ever) replace the old ABAP based workflow engine.
I wouldn't totally agree with all the points that you presented (ABAP WD being a nighmare, etc.). Actually I think that the direction (at least in some parts) is the opposite. For example SAP seem to have replaced their "old" travel management applications (Java WD) with new ABAP WD applications, so I see that they believe more in ABAP than Java (of course there might be some financial & other reasons behind this also.). In my opinion WDA has so many advantages compared to WDJ, that I would consider carefully the options when choosing the technology (the possible better(?) compatibilitly with web services might be one of the reasons).
Regards,
Karri

Is curly brace syntax and OPTIONAL realy enabled in Oracle 11g? (11.1.0.7)

I have just installed Oracle 11g patchset to upgrade from 11.1.0.6 to 11.1.0.7.
Oracle documentation states, that since 11.1.0.7 Curly brace syntax is allowed (http://download.oracle.com/docs/cd/B28359_01/appdev.111/b28397/sdo_rdf_concepts.htm#CIHHDGDI).
When I try to execute following SQL on sample family RDF data, I got an error. Is realy curly brace syntax and OPTIONAL feature enabled in 11.1.0.7?
SQL> SELECT x, y
2 FROM TABLE(SEM_MATCH(
3 '{?x :grandParentOf ?y . ?x rdf:type :Male}',
4 SEM_Models('family'),
5 SEM_Rulebases('RDFS','family_rb'),
6 SEM_ALIASES(SEM_ALIAS('','http://www.example.org/family/')),
7 null));
SELECT x, y
FROM TABLE(SEM_MATCH(
'{?x :grandParentOf ?y . ?x rdf:type :Male}',
SEM_Models('family'),
SEM_Rulebases('RDFS','family_rb'),
SEM_ALIASES(SEM_ALIAS('','http://www.example.org/family/')),
null))
ORA-29532: Java call terminated by uncaught Java exception: oracle.spatial.rdf.server.TokenMgrError: Lexical error at line 1, column 1. Encountered: "{" (123), after : ""
ORA-06512: at "MDSYS.RDF_MATCH_IMPL_T", line 178
ORA-06512: at "MDSYS.RDF_MATCH_IMPL_T", line 67
ORA-06512: at line 4

To use this syntax you need to download and install a new Oracle DB semantic technologies patch on top of 11.1.0.7.0:
For more details, please refer to:
http://download.oracle.com/docs/cd/B28359_01/appdev.111/b28397/sdo_rdf_newfeat.htm
"This section describes features that are included in a Release 11.1.0.7.0 patch that was made available on Oracle MetaLink in November, 2008."

How to upload data from excel to SAP and options to be used

How to upload data from excel to SAP and options to be used
thank you,
Regards,
Jagrut Bharatkumar shukla

Hi Jagrut,
You can use gui_upload.
chk the sample program mentioned below.
REPORT ZFTP .
DATA: BEGIN OF I_FILE OCCURS 0,
DATA(2000) TYPE C,
END OF I_FILE.
DATA: BEGIN OF I_FILE2 OCCURS 0,
DATA(2000) TYPE C,
END OF I_FILE2.
DATA: W_COUNT TYPE I.
PARAMETERS: P_FILEN TYPE STRING,
P_FILE2 TYPE STRING,
P_NUM(4) TYPE N..
AT SELECTION-SCREEN ON VALUE-REQUEST FOR P_FILEN.
PERFORM F_FILE_GET USING P_FILEN TEXT-G01.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR P_FILE2.
PERFORM F_FILE_GET USING P_FILE2 TEXT-G01.
START-OF-SELECTION.
CALL FUNCTION 'GUI_UPLOAD'
EXPORTING
filename = P_FILEN
FILETYPE = 'ASC'
HAS_FIELD_SEPARATOR = 'X'
HEADER_LENGTH = 0
READ_BY_LINE = 'X'
DAT_MODE = ' '
CODEPAGE = ' '
IGNORE_CERR = ABAP_TRUE
REPLACEMENT = '#'
CHECK_BOM = ' '
VIRUS_SCAN_PROFILE =
NO_AUTH_CHECK = ' '
IMPORTING
FILELENGTH =
HEADER =
tables
data_tab = I_FILE
IF SY-SUBRC <> 0.
MESSAGE E024(Z1).
ENDIF.
LOOP AT I_FILE.
W_COUNT = W_COUNT + 1.
IF NOT W_COUNT > P_NUM.
MOVE I_FILE TO I_FILE2.
APPEND I_FILE2.
ENDIF.
ENDLOOP.
CALL FUNCTION 'GUI_DOWNLOAD'
EXPORTING
BIN_FILESIZE =
filename = P_FILE2
FILETYPE = 'ASC'
APPEND = ' '
WRITE_FIELD_SEPARATOR = 'X'
HEADER = '00'
TRUNC_TRAILING_BLANKS = ' '
WRITE_LF = 'X'
COL_SELECT = ' '
COL_SELECT_MASK = ' '
DAT_MODE = ' '
CONFIRM_OVERWRITE = ' '
NO_AUTH_CHECK = ' '
CODEPAGE = ' '
IGNORE_CERR = ABAP_TRUE
REPLACEMENT = '#'
WRITE_BOM = ' '
TRUNC_TRAILING_BLANKS_EOL = 'X'
WK1_N_FORMAT = ' '
WK1_N_SIZE = ' '
WK1_T_FORMAT = ' '
WK1_T_SIZE = ' '
IMPORTING
FILELENGTH =
tables
data_tab = I_FILE2
FIELDNAMES =
*& Form F_FILE_GET
text
-->P_P_FILEN text
-->P_TEXT_G01 text
FORM F_FILE_GET USING L_FILENA L_TEXT.
CALL FUNCTION 'WS_FILENAME_GET'
EXPORTING
DEF_FILENAME = ' '
DEF_PATH = ' '
MASK = ',.,*.TXT.'
MODE = 'O'
TITLE = L_TEXT
IMPORTING
FILENAME = L_FILENA
rc =
EXCEPTIONS
INV_WINSYS = 1
NO_BATCH = 2
SELECTION_CANCEL = 3
SELECTION_ERROR = 4
OTHERS = 5
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
Reward if helpful.
Regards,
Harini.S

Hey, my ipad is disabled and i cant open. i tried connecting it with itunes in recovery mode to restore it but it wont work it doesnt show and options itunes doesnt detect my ipad in recovery mode. what do i do know? please help!!!

Hey, my ipad is disabled and i cant open. i tried connecting it with itunes in recovery mode to restore it but it wont work it doesnt show and options itunes doesnt detect my ipad in recovery mode. what do i do know? please help!!!

If you followed these instructions and you were unable to enter recovery mode, I'm still leaning toward a hardware problem. Also, since you have IOS-7, read this. It might help.

How to integrate a Smart Form in Web Dynpro and how to view it on portal?

Hi,
I have created a Smart Form in ABAP. I need to use it in Web Dynpro. How can this be done?
I want to integrate this Smart Form in a Web Dynpro Application and then display this Smart Form on the Portal (when I deploy the Web Dynpro application).
Is it compulsory to first convert the Smart Form into PDF Format? Is there some other way ??
Thanks in Advance.
Regards,
Harshada

Hi,
Go through Re: Web Dynpro and Smart Forms.
Regards,
Satyajit.

Property List error: Unexpected character b at line 1 / JSON error: JSON text did not start with array or object and option to allow fragments not set.

Hi,
I have a MBP 13' Late 2011 and Yosemite 10.10.2 (14C1514).
Until yesterday, I was using Garmin ConnectIQ SDK and all was working fine.
Yesterday, I've updated my system with latest security updates and Xcode updates too (Version 6.2 (6C131e)).
Since, I can't launch the ConnectIQ simulator app, I have this message in console :
8/04/2015 15:19:04,103 mds[38]: There was an error parsing the Info.plist for the bundle at URL Info.plist -- file:///Volumes/Leto/connectiq-sdk-mac-1.1.0_2/ios/ConnectIQ.bundle/
The data couldn’t be read because it isn’t in the correct format.
<CFBasicHash 0x7fa64f44e9a0 [0x7fff7dfc7cf0]>{type = immutable dict, count = 2,
entries =>
0 : <CFString 0x7fff7df92580 [0x7fff7dfc7cf0]>{contents = "NSDebugDescription"} = <CFString 0x7fa64f44f0a0 [0x7fff7dfc7cf0]>{contents = "Unexpected character b at line 1"}
1 : <CFString 0x7fff7df9f5e0 [0x7fff7dfc7cf0]>{contents = "kCFPropertyListOldStyleParsingError"} = Error Domain=NSCocoaErrorDomain Code=3840 "The data couldn’t be read because it isn’t in the correct format." (Conversion of string failed.) UserInfo=0x7fa64f44eda0 {NSDebugDescription=Conversion of string failed.}
I have looked at this file and it looks like a binary plist
bplist00ß^P^V^A^B^C^D^E^F^G^H
^K^L^M^N^O^P^Q^R^S^T^U^V^W^X^Y^Z^[^\^]^^^_ !"$%&'()'+,^[\CFBundleNameWDTXcodeYDTSDKName_^P^XNSHumanReadableCopyrightZDTSDKBuild_^P^YCFBundleDevelopmentRegion_^P^OCFBundleVersi on_^P^SBuildMachineOSBuild^DTPlatformName_^P^SCFBundlePackageType_^P^ZCFBundleShortVersionString_^P^ZCFBundleSupportedPlatforms_^P^]CFBundleInfoDictionaryVersion_^P^RCFBundleE xecutableZDTCompiler_^P^PMinimumOSVersion_^P^RCFBundleIdentifier^UIDeviceFamily_^P^QDTPlatformVersion\DTXcodeBuild_^P^QCFBundleSignature_^P^ODTPlatformBuildYConnectIQT0611[iph oneos8.1o^P-^@C^@o^@p^@y^@r^@i^@g^@h^@t^@ ^@©^@ ^@2^@0^@1^@5^@ ^@G^@a^@r^@m^@i^@n^@.^@ ^@A^@l^@l^@ ^@r^@i^@g^@h^@t^@s^@ ^@r^@e^@s^@e^@r^@v^@e^@d^@.V12B411RenQ1V14C109Xiphoneos TBNDLS1.0¡#XiPhoneOSS6.0YConnectIQ_^P"com.apple.compilers.llvm.clang.1_0S8.1_^P^Tcom.garmin.ConnectIQ¡*^P^AW6A2008aT????^@^H^@7^@D^@L^@V^@q^@|^@<98>^@ª^@À^@Ï^@å^A^B^A^_^A?^AT^ A_^Ar^A<87>^A<96>^Aª^A·^AË^AÝ^Aç^Aì^Aø^BU^B\^B_^Ba^Bh^Bq^Bv^Bz^B|^B<85>^B<89>^B<93>^B¸^B¼^BÓ^BÕ^B×^Bß^@^@^@^@^@^@^B^A^@^@^@^@^@^@^@-^@^@^@^@^@^@^@^@^@^@^@^@^@^@^Bä
I guess it is a normal format but my system seems to be unable to read binary plist ?
I tried some stuff with plutil
plutil -lint Info.plist
Info.plist: Unexpected character b at line 1
Same for convert
plutil -convert xml1 Info.plist
Info.plist: Property List error: Unexpected character b at line 1 / JSON error: JSON text did not start with array or object and option to allow fragments not set.
I also try to download a fresh version of the connectIQ SDK and no changes.
Any idea ?
Thanks

Step by step, how did you arrive at seeing this agreement?

Command, Control, and Option keys no longer works with Citrix Receiver after upgrading to OSX 10.9.5

At first my keyboard did not work with Citrix Receiver after upgrading to OSX 10.9.5 and I found the workaround by using "cmd + tab," however, once my keyboard work within Citrix, the "command, control, and option" keys no longer work. Does anyone have a remedy for this?

Keyboard no longer works with Citrix Receiver after upgrading to OSX 10.9.5

HT2638 since updating iPhoto it has ceased to open. i have tried to Hold down the Command and Option keys on the keyboard but it does not work. iPhoto still does not open

Since updating iPhoto it has ceased to open. I have tried to Hold down the Command and Option keys on the keyboard which is the suggested solution to then open a suggested solution to rebuild the library, but it does not work. iPhoto still does not open. can someone please help?
thank you

Try the following:
1 - delete the iPhoto preference file, com.apple.iPhoto.plist, that resides in your
Home/Library/ Preferences folder.
2 - delete iPhoto's cache folder(s):
Home/Library/Containers/com.apple.iPhoto
and, if there is one, the
Home/Library/Caches/com.apple.iPhoto folder
3 - reboot, launch iPhoto and try again.
NOTE: For Mavericks, 10.9, go to your Home folder and use the View ➙ Show View Options menu to bring the this window:
Happy Holidays

"command-z" and "option-command-z" does nothing in Final Cut Pro 5

My iMac is new and I have Final Cut Pro 5 installed. Cannot get "command-z" to undo anything in final cut and "option-command-z" will not open an audio file in wave format. Do these functions just not work in Final Cut?
iMac Mac OS X (10.4.7)

opt-cmd-z is "trim with edit selection audio"
After checking the keyboard settings in System Prefs on my MAC I don't see a universal UNDO command in there. It seems that cmd-z is just a common keyboard shortcut used in most apps. (Although Shake doesn't like it very much...) lilrad should check the Tools menu-Keyboard Layouts-Customize, and then click on the cmd and opt icons on the digital keyboard and see what icon it shows. If it is not set, there ya go. If you don't recognize the icon, try going to a command in the side button list (to the right of thte keyboard in this window) and click on a command that does not already have a shortcut. Type the cmd-z, or opt-cmd-z, (after unlocking the keyboard at the bottom left) and it will give you a warning as to what this keystroke is already set for.
There should not be any MAC override, but if there is that would be in the system settings window under keyboard and mouse, keyboard shortcuts. Scroll down and see if someone has set a master cmd-z shortcut. If so, get rid of it. It should be an undo command for all apps. (But that's just me, I could be wrong...)

DNS discovery and option 43 in DHCP which is prior

We have both DNS and Option 43 contorller discovery ways in one network but they direct to different WCL .
I just want to know which one is more aggressive to advertise the IP address of controller.
thank you in advance.

I need to know what's the procedure for LAP when looking for WLC ? which one will be the first ? DNS looking for option or DHCP option ?
thank you
Scott Fella wrote:Here is a link to the AP's selection process. Also in the link the how the AP will choose which WLC.
After the LAP completes steps 1 to 5 of the Layer 3 LWAPP WLC Discovery Algorithm, the LAP selects a WLC from the candidate WLC list and sends that WLC an LWAPP join request.
WLCs embed this important information in the LWAPP discovery response:
The controller sysName
The controller type
The controller AP capacity and its current AP load
The Master Controller flag
An AP-manager IP address
The LAP uses this information to make a controller selection, with use of these precedence rules:
http://www.cisco.com/en/US/tech/tk722/tk809/technologies_tech_note09186a00806c9e51.shtml#topic3
Sent from Cisco Technical Support iPhone App

SQL Loader error on Fields terminated and optionally enclosed

When you have fields terminated and optionally enclosed, you should be able to have the enclosure characters within the data by doubling them.
So if I have fields terminated by '|' optionally enclosed by '"' and my data has a double quote in it, I can get SQL Loader to take it by replacing the double quote with two double quotes.
But this doesn't always work. For some reason the following string gets the error "no terminator found after TERMINATED and ENCLOSED field"
|"TRO2 ldj?=)(/&%ç*""aàéè_:;!àèé,jpdjbdbd"|
Apparently having the double quote immediately after an asterisk makes SQL Loader not see the second double quote. If I edit it and remove the two double quotes it loads OK. Also if I change the string to
|"TRO2 ldj?=)(/&%ç*aà""éè_:;!àèé,jpdjbdbd"|
Moving the double quote away from the asterisk it loads OK.
Anybody encounter this problem before?

Oracle version is 11.1.0.7.0
OS is Windows 6.1.7601
I can't remove the "optionally enclosed by" clause because we're getting the data from another system. Fortunately this is test data and this particular combination of characters is unlikely to occur in production data.

Dynpro and BW integration documentation and options

Similar Messages

Maybe you are looking for