E-Mail response with Prev. Ans. Repeated and Pers. Info.

It seems like more people are using email response, many from their phones. On many of these responses there is a messages at the bottom with their name, e-mail, phone number, and address. There is also a repeat of the previous response. This puts user at risk of spam, makes a mess of the forum, and adds extra work for moderators to clean up.
Is there a way for the highly trained and inovative Jive programers to prevent this last bit of info from being added?
There is a line that separtates the response from the personal info and question repeat, so seems like an excellent place to put in a limiter. If the Jive engineers are not capable of fixing the problem perhaps one of the users can write down a few lines of code to make it happen.
Disclaimer: I hate e-mail responses as they do not get corrections, do not see the flow of responses, and rarely give you credit for solving problem. Also, not a programer.

adobe-admin wrote:
Jive doesn't have anything to do with signing in. When you click Sign In on a forum page it takes you to adobe.com to sign in. If you cannot sign in the issue is with your Adobe ID account at Adobe. Is your Adobe ID a nickname or an email address? Can I have someone who works on membership contact you directly?
If that is the case then everyone's ID is screwed up because ever day everyone has to sign in. And everytime the quit their web browser and re open. Or there are day s when they can't sign in to the forums. Last week there was two days (not together) in which I couldn't sign-in if I was to make the trip to California, washington state or oregon (where ever adobe headquarters are and personally sign in to a sign-in-book. To say its allthe USerdID is just a Cope out. Whomever is handling the Sign in server Don't know what the heck (I would say something stong but do not wish to get Banned) they are doing. There is absolutely no excuse, None, nada, for the sign in troubles. If they can't fix the **** thing then they need to either get fired or resign. If the Sign in Server is not Jive's responsibility. Then whomever's responsibility need to fix the issues.
I've emptied cahes in all my Browsers
I've removed cookies in all my browsers.
I've done everything but got up and danced an Iris Jig (which someone would have to teach me)
I have the same issue in
FireFox
SeaMonkey
Safari
Oniweb
Chrome
Maxthon
Camino
Opera
Opera Next
iCab
Aurora
And FireForUX (Austrialis)
The issue is not with my Account(s) Its squarely the responsibily of Adobe, lies squarely on their shoulders. I am tired of this Blame being put on the Users. We are trying to do adobe a Favor since they want to cheap out on Support. And if we either can't sign our being huranged by the sign in server everytime we turn around.
Adobe don't realize it but their reputation now is lower than Intuit's. Quit putting the blame on users a nd fix the problems.

Similar Messages

How do i mail merge with the new Pages and Numbers?

How do I mail merge with the new Pages and Numbers?
On Pages 09 I have a document that draws variable data from a spreadsheet created in Numbers.
With the new Pages and Numbers program update, my links are lost and I am unable to see how to correct this.

Thanks Peter,
very disappointing.
My Pages 09 keeps opening in the new one.
I dont think they want me to be a loyal customer anymore.
They changed Final Cut Pro, so now I use Premier Pro
Aperture 3 has been left behind so now I moved to Lightroom 4.
And now Pages 5 does not have a vital component, so back to Word.
Sad day
Thanks again

How to set up a mail server with a private DNS and relay over a public mail

How to set up the mail server that we can send and pick up emails inside and outside?
Our private network has the DNS name dnsname1.private.
We have our privat DNS Server and he can forward requests to outside over our router.
Our public emails are hosted by an internet provider. This dns name is dnsname2.com and dnsname2.org.
How we have to set up our mail server that we can pick up our emails from our public dnsname2.com?
And when we write an email how we have to set up it that the dnsname is dansname2.com and not dnsname1.private?

If you want to move your mailservice to your own (internal) server, start by making sure you can recieve traffic on port TCP 25 (SMTP). Some ISPs blocks this port, especially on "non business" connections.
Can you send mail from your LAN directly to where your mail is hosted using port 25 TCP or do you have to relay via your ISP?
You have a static public IP?

Mail hang with multiple pop accounts and invalid new mail counter

All
More than a year ago, I migrated all email accounts from Outlook to Apple Mail using O2M application. I have 2 pop accounts and gmail account. Everything worked fine for a few month but then Mail started to hang during message receiving. It did so very often (4/5 times). When it does, nothing will revive it except a "force quit".
I tried to fetch email from each account individually, that worked well every time. After I was sure that it has to do with getting new mail simultaneously, I tried everything to fix it. I tried to reconstruct all the mail boxes, I tried using only 2 boxes with all combinations (1 pop 1 gmail, 2 pop, etc) but nothing worked.
I even tried to export all my mail boxes, then delete everything from Mail then reimport them with no luck.
In addition, a couple of months later, my "Inbox" new mail counter started to sometimes displaying the wrong new mail count. It displays 2-4 new messages while there is none. In order to be sure, I created a smart mail box to have only new mail and it had none. By simply switching to any other folder then returning back to Inbox solves the problem.
Can any one help?

Make absolutely sure that your email addresses and configuration are correct. In nearly every case I've encountered, this is the problem.
If you've confirmed this, make sure you're configured properly on your webmail account, if you have one. Webmail is something like ATT, the source of your internet.
If you're still flummoxed, play hardball. Make sure you have all your current account info and passwords, and delete them in Mail/Preferences/Accounts. Then, reenter them one by one until they're perfect. This makes sure your settings are consistent and correct.

How can I add a Mail folder with the "Inbox, Sent, and Trash" folders? I have Windows 8.1

After I installed the 7.0.6 update, my iPhone crashed & had to do a restart. I saved my Contacts. I've been syncing my iPhone to store data on my PC instead of iCloud. I'm assuming all of my pictures etc. are in the iPod Photo Cache, which I cannot open since they are THMB files. How can I view all of my "lost" data without having to pay for the "Converter" program, which according to many of the people in my boat, say doesn't work & is a rip off? I'm also trying to put an "Archive" folder back in my Mail folder. I've tried to follow instructions but my iPhone 7.1 does not have the same options. All of this is so frustrating.....load an upgrade & screws a lot of stuff up. Just like "Trust this computer?" on 7.0.6 update. Anyway, I hope someone can help with these minor problems.
Thank you.
Leo Nard

Not in Mail. If you referring to not having to use the menu, you can click the + sign at the bottom to create new mailboxes. But you still have to fill in the window with location and name. You can right click to create a new mailbox on an existing one, but not in the main account itself and you still have to fill in the info. It would create a sub folder.
You can also try it at the gmail website. There might be shortcuts there.

IPad mail opens with blank white screen and then closes since returning from overseas. Worked fine up until then.

Since returning from overseas my iPad mail does not work. Selecting mail opens a blank white screen which stays open for a short time then closes. No functionality is available during this time. Doing the normal reboots etc does not resolve the problem.

Have you tried to go into the settings, mail, contacts and calendars and removing then re-adding the account info?

HT204074 I have been reading about how to associate devices with my Apple ID, and the info says I can go to my account through iTunes to find "Manage Devices" but that does not exist. Either it was phased out our there are other ways to get there, but can

I am trying to find out about all my associated devices. I recently got a message that I had used my last device, and am not sure how this can be. The instructions for accessing the info via the iTunes account info page apparently were not shared with the programmers since there is no Manage Devices button or option as far as I can see. How do I do this?

After hours and hours of failed searches, I must have used a different keyword in my Google search, and here is the website that I was looking for:
https://supportprofile.apple.com
And here is the guy whose website I found that helped me solve my problem:
http://www.marcomc.com/2011/01/how-to-find-the-list-of-my-apple-registered-produ cts/
I was going to rant here about how badly Apple designed their "Apple Id" stuff, how they strongly distinguish between using your Apple Id at the online Apple Store vs. using it at the App Store (which you have to get to via iTunes ... quite ridiculous) ... but I won't. :-)
Anyway, I hope that the two previously mentioned websites will be of help to others.

Itunes erased all the album and artist info when reloading library!!!

My problem is a big one. I've got 8600+ songs (800+ albums) on my hard drive. These are all from physical CDs; I ripped them in wav, then converted them to mp3. When I did this, I kept both the wav AND mp3 files in each respective album folder; about 400G of wav and 80G of mp3.
OK, so a couple weeks ago I got hit with a virus. It messed up my XP OS to the point where I needed to do a reformat and reinstall. All of my music files are on an external hard drive, so no big deal there. I finish the reinstall, re-download itunes, and tell it where to find my music, and to import it into the library.
This is where things go horribly wrong. Itunes imports all the mp3 files in as separate folders/albums, just like before, with all the track and artist info intact. However, for some reason, it took all the wav files and dumped them into one giant Unknown Artist/Unknown Album folder. In doing so, it appears to have stripped the artist AND album info from every single one of the 8600+ tracks! I don't know why it did this, as the wav files in the itunes folder all had the exact same track info as the mp3s.
My question now is: is there any way I can get this info BACK, any program that can look at the individual tracks and figure out what artist and album they go with? Or is there something within itunes that can do it that I haven't found yet? There's no way I can go through and do this track by track; I can't even begin to calculate how long that'd take. My only OTHER option would be to re-rip all the CDs, but again, that took months the first time and I don't want to do it again. However, these files are pretty much useless as they are, in a giant pile that seems only to be organized by the songs' respective track numbers.
I am screaming HELP in capital letters here. Even if I could find a program or solution that would find MOST of the tracks' info, I'd be happy. I'd also be interested in knowing why itunes did this in the first place, for future reference.
And just to head off one solution I expect to be offered, no, I did not have the files backed up anywhere else; reimporting an un-reorganized version of the library isn't an option. I had just finished ripping them and hadn't picked up a second hard drive yet. I know, first thing I should have done.
In any event, any help would be appreciated. Please feel free to email me. Thanks.

I just remembered some older posts talking about some software from musicbrainz.org.
It might be able to make some sense out of all those WAV files, if you decide to spend the time on it. Honestly I'd prefer to rip my CDs than go through something like that, because I'm a control freak and would not trust the program to really find the right info....but that's just me. It might be easy to set up and a snap to use, for all I know.
http://forums.musicbrainz.org/viewtopic.php?id=1730

When I compose and send a mail, it gets placed in Outbox and I get a prompt stating something like "relating the message is not supported". Even if I compose a newest age, it says the vey same thing. I just cannot send any response through my mail account

When I compose and send a mail, it gets placed in Outbox and I get a prompt stating something like "relating the message is not supported". Even if I compose a newest age, it says the vey same thing. I just cannot send any response through my mail account. Can anyone help with a solution?

You haven't set up the SMTP (outgoing) mail server correctly. You probably didn't enter your user ID and password for the outgoing server. They are needed even though it says "optional".

I tried several times to setup a mail account with Thunderbird, but next time I boot the computer and start Thunderbird, no account is shown.

I bought a new desktop PC with Win 8.1 and installed Firefox and Thunderbird.
Then, I tried to configure the e-mail account manually (as IMAP) following the instructions provided here: https://support-en.upc-cablecom.ch/app/answers/detail/a_id/22 , but failed to configure the smtp outgoing mail server correctly (I could receive mail, but not send them). Subsequently, I deleted that account. Then, I launched the automatic mail setting tool provided by UPC Cablecom under the link http://www.upc-cablecom.ch/content/dam/www-upc-cablecom-ch/Support/executables/upc-cablecom-email-assistent.exe and it did successfully setup the account, however as a POP3 account. As I was not happy with it, I deleted the POP3 incoming mail server (and lost the received e-mails, of course...) and retried a manual setup. Doing so, I obtained an incoming IMAP mail account plus two outgoing SMTP server (comparing them, I also understood the configuration mistake I had done the first time). I then deleted the manual SMTP server as the automatically setup server worked properly.
In this context, both receiving and sending e-mail worked OK. However, the next time I started the computer, the e-mail account disappeared and Thunderbird asked me to setup a new account again. I successfully set it up manually one more time, but the same problem surfaced again at the next boot, the e-mail account was gone...!
Thanks in advance for your help!
Maxonce

Check what profile is being used.
AppMenu button - Help - Troubleshooting Information - Profile Directory - Open Directory
Your profile folder should open in Windows Explorer. What is the profile location?
Reboot your computer and repeat the steps above. Has the profile folder changed?

Select with One-to-Many and Many-to-One without repeating

Hi
I have a customer who needs a report two sides left and right, but allowing for One-to-Many and Many-to-One relationships in the one report.
A little background:-
This has do do with listings on land and buildings.
One building can be built on a few pieces of land.
Similarly, there can be several buildings on one piece of land.
What is required is a listing of buildings on the left, land on the right, but without repeating the "single line entries" either left or right.
For example Building1 is on Land1 and Land2, and Building2 and Building3 are built on Land3.
We need:-
Building1 Land1
________Land2
Building2 Land3
Building3______
The ___ just used for spacing so you get the idea ;)
Essentially - a "break by" on columns on the left and right.
The Buildings and Land are in different tables, with a link table - one row for each link.
Any ideas?
Thanks
Mike

To jitu.jk - first, this is not in SQL*Plus - its a report in APEX - second, I see no way to break on the left and the right in the same select.
Maybe there is a way.
To Etbin
This is a very inovative solution - I've tried it out and the result is:-
BUILDING LAND
_____Land 4
_____Land 3
_____Land 5
Building 2 Land 4
Building 3 Land 1
_____Land 4
Building 4 Land 4
Building 5 Land 3
_____Land 4
(The underscores I put in for spacing - not perfect but you get the idea - hard whe you write the reply in a fixed space font and it's displayed in the forum in variable space font!! ;)
9 rows selected.
This is not quite the desired result - in your list of associations, we have Building1 associated with Land 3,4, and 5.
So for Building 1 we should have:-
Building 1 Land 3
________Land 4
________Land 5..........
But your result doesn't include Building 1 at all.
The other requirement is that no building or land is ever repeated - so I came up with the concept of "groups".
Starting with one building - I find all pieces of land that are associated - listing them on the right (without repeating the building.
I then find any other buildings asociated with any of the land records that the first building was associated with.
These are listed on the left - without repeating the land records on the right.
This group is given a unique identifier of the minimum association ID (my associations have ID's).
This all done, I use the unique ID as a break column ans summarise additional columns (area, value etc) below each group.
Because of the summaries - adding area and value etc, I can't have any building or land duplicated as I would then "double count" the area, value etc.
Maybe you method can be made to work with some tweaking.
Very clever indeed - forums need great answers like this - it keeps us going.
Thanks again
Mike

I have a problem with Mail on my Macbook Pro. It is configurated with a gmail account, and now I can't access the mail. Is it possible to reboot the account or..? Please help:)

I have a problem with Mail on my Macbook Pro. It is configurated with a gmail account, and now I can't access the mail. Is it possible to reboot the account or..? Please help:)

The question mark means the computer cannot find a bootable volumes so can;t do anything, That, combined with annoying sounds, strongly suggests a failed hard drive.
You can ask a "genius" at an Apple Rtail Store to test it but I'm pretty sure the drive is kaput. I'm hoping you had your data backed up.

When i use IE9, i go to my emails and any pics in the mail open with the mail but with FF i have to download them is there a way to make the pics open in the mail, i set yahoo to load images automatically in the options menu this has had no effect, thanks

some pictures(jpeg or gif) come as part of email if i use IE9 these images open as part of the mail, but with firefox i have to download them separately and then they don't appear in email. i have been in the options menu and allowed yahoo.com to automatically load images but this has had no effect, thanks

Sounds like you did this on the fly.
MM is supposed to open the Marker Panel Dialogue
M just sets a marker
Not sure if either are intended for on the fly during playback .
There is also a Marker Icon on the Source Window Pane >>

If I no longer have access to my original e-mail associated with my account and my passwords and e-mail accounts associated with my Apple device, how can I fix this solution? I have 2 ipads and 1 iphone and I cannot update any of my apps.

I tried to change the e-mail associated with my apple account because my school was closing and I knew I would no longer have accss to that e-mail account, however now all 3 of my devices ( 2 ipads & 1 iphone are screwed up as far as the e-mail accounts associated with each device and the passwords. I have tried all the on-line support/suggestions and took my devices to a local Apple store and no one/nothing helps.
Does anyone have a solution? I can purchase new apps but I cannot update any of the apps I have to any of my devices.
<Email Edited By Host>

Unfortunately, it says I can't delete anything without the missing password.

My email account in Mail.app is IMAP, but when I delete emails, they don't delete from other devices connected to the mail server with IMAP. Deleted mail on other devices delete as normal from the server and thus from other devices as normal.

MacBook Pro, late 2011 version. Up to date Mountain Lion.
My email account in the Mail.app is set up as IMAP, but when I delete emails in the Mac Mail App, they are not deleted from the mail clients of the other devices that are connected to the mail server with IMAP. IMAP works perfectly between Windows Outlook 2010, iPad Mail App and Android default mail client. Deleted messages behave correctly, as in delete from one device and the mail is deleted from all devices.
Having just tested in reverse order on the Mac; emails deleted from the email client on Windows, iPad and Android are not deleted in the Mac Mail App. It appears that the account is behaving like POP rather than IMAP.
Any advice on how to have IMAP work correctly on the MacBook Pro Mail.app?
Thank you.

Hi Csound1, thanks. The email host is 1and1.co.uk, however, i am going to fess up and make myself look like a plonker now -
the email account in question was set up in Outlook as POP - stupid, stupid, stupid me, wasted an afternoon on this! I have now changed the Outlook account to IMAP and Mail.app works perfectly - and looks much nicer than Outlook did. Im in the middle of converting from Windows to a Mac, and still finding my way around the Mac
The lesson learned, never assume - always double check! All my other email addresses with 1and1 are all imap, except this one, and it happened to be the first one I set up in the Mail.app. (bows head in disgrace!)
Thank you anyway for attempting to help me!
Cheers

E-Mail response with Prev. Ans. Repeated and Pers. Info.

Similar Messages

Maybe you are looking for