E-recruiting - Assignment to Application Groups

Hi,
When an external application is entered and assigned to an application group the object 'application' is created. If an applicant is subsequently assigned to another application group this is visible from Candidate Selection > Assignments.
However, if I look under 'Applications' from the Application Management area of the recruiter start page, the application does not appear against the application group to which it has just been assigned.
Does anyone know if this is standard - i.e. is the application only visible against the application group is was created against?
thanks in advance
Jim

Hello Jim,
this is standard.
for some background:
When creating an application the application gets an own recruiting team. All recruiting team members of an requisition or application group are copied to the application (you can see this in HRP5131).
When you create another assignment (candidacy) for the same application this team is not changed and as the"Applications" list only shows all applications in which recruiting team you are, you only see the application for the origiginal application group.
Even if you change the recruting team of a requsition / application group the new assigned member won't see the applications which were entered earlier. If you are using release 600 there is a checkbox to write the rec team change also to the applications so the new member can see the applications. For 300 there is no such option at least to sp13 - not sure if they made it in the later packs.
Best regards
Roman Weise

Similar Messages

SAP E-Recruiting -- Application Groups

I delete application groups, no. What happen, to candidate applications that I assign to application group. I search SAP Help and this forum,no. I see no answer.

Hi Vishal,
It is not possible to delete the Application Group if any open applications exists.
In case if you try deleting the Application Group for which some candidates have applied already, then you will receive a message saying that "Cannot be deleted since open applications exist".
We can delete them only when there are no open applications exists for that Application group.

E-recruiting -Delete tabs for closed application groups (Menu Applications)

Hi gurus,
I want to delete the application group tabs from the menu "Applications" in e-recruiting.
The applications are stored on different tab pages. A tab page contains all applications that are based on actual job postings
(which are based on requisitions). In addition, a tab page also exists for unsolicited applications (applications that are assigned to an application group) for each application group. I would like to know who I can delete these tabs when an application group is closed. Currently, I have many tabs created without aplications inside and I would like to deleted and keep only the opened application groups. All the applications status are "rejected" or "hired" for each application group. There's no one "in process". Any idea how can I delete these tabs?
Thanks in advance,
Juanjo Garcin.

I'm not aware of any relationship link built in eRC that would allow for a search to the candidates' 'My Applications' (key word...application) or 'Favorites' for expired or closed postings. Think of when you save a URL in your web browser favorites and the site is no longer valid. Your browser doesn't know it until it searches for the address in the URL you saved that doesn't exist.
I hope this is helpful.
Samantha

E-Recruiting - Application Group for internal candidates

Hello,
has anybody an idea how to assign internal candidates to an application group within the SAP E-Recruiting 603? This application group should only exist in the background and should not been publicated. So I guess a requisition won´t be helpful in that case.
If you´ll setup a new application group and start a publication, this group is only available for external candidates for the Recruiter via "Reference Code Search". It seems that it´s not possible to assign internal candidates.
Thanks in advance.
Christian
Edited by: Lohr Christian on Mar 1, 2010 4:44 PM

Hello,
Application groups are only assigned to external candidates.
If you want to enable initial applications also for employees (internal candidates) this was designed as follows:
If an internal candidate releases his/her profile and maintains there data in the preferences tab he/she shows that they are interested in a new position and the direction this job should be like.
Regards
Nicole

Characteristic 0UNSAPPGRP (Unsolicited application group)

Hi,
What's the meaning of characteristic 0UNSAPPGRP (Unsolicited application group) in InfoCube Applications and Applicant Actions ?
Thanks,
Carmit

SPRO
IMG  Personnel Management u2013 Recruitment u2013 Applicant Administration u2013 Applicant Structure u2013 Create Applicant Groups.
Applicant group     Applicant Group text     Applicant class     Applicant class text
1     Active External     AP     External applicant
2     Active internal     P     Internal applicant
3     Student employee     AP     External applicant
4     Temporary Worker     AP     External applicant
IMG  Personnel Management u2013 Recruitment u2013 Applicant Administration u2013 Applicant Structure u2013 Create Applicant Ranges.
1     Trainee
2     Salaried Employees
3     Managerial Staff
IMG  Personnel Management u2013 Recruitment u2013 Applicant Administration u2013 Applicant Structure - Create Unsolicited Application Groups.
Unsoli Appl     Unsol ApplicationGroup     Administrator     Administrator Name
001     Acounting dept.     SCH     Egon Schulz
002     Sales & distribution     MEI     Hans Meier
003     Personnel dept.     MEI     Hans Meier
004     Development     SCH     Egon Schulz
and assign NUAMP with applicant grp and ranges

Assigning an application to different sound outputs

Question: Is there a way to assign an application to use a sound output options in the mixer or another Win7 application?
I have installed Win7 RC 32bit. I have headphones and speaker outputs on my system. Both are detected and both can be assigned to a working default sound choice. I am unable to assign an applications sound output to a certain outputs or change them.
The only way I can make a sound application work through the speakers if the headset is assigned the default role is to go into sound management, then assign the speakers to default and then restart my application.
Desired: I would like an application profile to default to the assigned role from the mixer. The settings could be permanent or temporary. If the 1st choice is not available, use the alternate working or (default). The sound should dynamically change or at the very least keep that profile with that application until changed.
In the mixer, I should be able to rt click on the application in the mixer and manually assign it to a sound device. This option should be assigned to a default target to play ONLY if the desired is not available. Possible options can be, just one time, or have this device handle sound if available.
Hardware: Asus Rampage 2: Gene motherboard, 6GB Ram, GTX 275 graphics, Seagate 1.5TB. Drivers auto discovered on install and appear to be functional.

Hi TKCDAC,
As you may noticed, great improvements have been made in Windows 7. Applications can realize Stream Routing via the new Core Audio APIs. Windows 7 has the ability to distinguish between communication devices and all other audio devices. It is now possible to have both a Default Communications Device that is separate from the Default Audio Device. The Default Communication Devices will be used for PC based communication like web chat or VOIP, and the Default Audio Device will be used for everything else. Stream switching enabled dynamic stream switching based on the default device. If the default audio device is disabled or unplugged, Windows automatically tries to determine the next default audio device and will dynamically redirect the audio to that new device.
For instance, if you would like to play the audio via headphone when using communication applications such as Windows Live Messenger, we can simply right click the volume icon in the system tray, click Playback Devices, right click the headphone listed and then choose Set as default Communications Device.
For more information, please refer to the following articles:
http://msdn.microsoft.com/en-us/library/dd756612(VS.85).aspx
http://louisgale.blogspot.com/2009/08/live-messenger-and-default.html
Also, based on my test, certain application such as Windows Media Player has a sound output option. To change the settings, please open Windows Media Player, click Tools, Options, click Devices tab, double click Speakers in the Devices list, pull down the Select the audio device and then choose the device you would like to play the music from Windows Media Player, click OK. We may play another song in the play list to take effect.
In the meantime, I will forward your suggestions to our Product Group. Please be assured that any improvements in the product are based on users' requirements.
Thanks,
Linda

Unable to see assign users or groups option under a groupin Shared services

I have a bizzare issue related to Shared services.
In Application 1 (on PROD env), after I select the group, right-click and go to properties, under "group members" and "user members" tabs, I do not see the options to assign access to any of the existings groups (we have about 50+ groups). I can only view the existing users/groups, even though I have been given admin/proviosioning rights, while the other admin can assign access to the same application.
While for Application 2 (on DEV) I am able to see all these options and I am able to assign users and groups to any of the groups. I do not see them as a browser issue, as I have opened both these links on the same IE window, but on different tabs.
Unfortunately, I can't test App1 on TEST/DEV, as we do not have its copy on here, it is all on PROD and App2 is only on DEV.
Any ideas?
Thanks,
Paul

I would of thought it was provision related, can you try setting up another user as a test with the correct provisioning such as provisioning manager of the different product areas and see if the new user works.
If it does then it points an issue with your account or the way it has been provisioned.
Cheers
John
http://john-goodwin.blogspot.com/

Assigning contact to groups

I can easily assign my contacts to one or more groups (using drag and drop) on the desktop application. How can I assign a new contact to one or more groups on my iphone 3g?
Thanks, Martin

I don't know how this makes sense; a contact can be in many groups. Generally an appointment is only in one calendar.
You can always assign contacts to groups by dragging them to the group in Contacts.

No user assigned to virtual group ....

Hi experts,
I am configuring UME to create virtual groups in Portal:
     ume.virtual_groups.user_attribute=department
     ume.vitrual_groups.user_attribute.namespace=com.sap.security.core
     ume.virtual_groups.names=Marketing;Production;Distribution
     ume.virtual_groups.name_prefix=VG_
And virtual groups can be found in the useradmin application. But no users are assigned to virtual groups, although there are users with the attributes department = Marketing or Production or Distribution in the portal.
where is mistake?
Best regards,
Andrei

problem solved.
in SAP Note 1372126 encountered a new value for namespace, different from help.sap.com (http://help.sap.com/saphelp_nw70/helpdata/en/43/fcfa2942ed7067e10000000a1553f6/content.htm).
after changing the namespace, the problem resolved
ume.virtual_groups.user_attribute.namespace = com.sap.security.core.usermanagement
Best regards,
Andrei
Edited by: Andrei Liashkevich on Oct 13, 2009 4:00 PM

What ismeant by unsolicited application groups in HR of SAP.

what is unsolicited application group , when will be it use?

Hi,
Internal applicants are those employed by the company on the date that the job application is received. External applicants are those not employed by the company on this date. This latter grouping can therefore also include former employees of the company.
The procedure for entering data is different for internal and external applicants. You have to manually enter all required data on external applicants. When dealing with internal applicants, however, you can import data such as name and address simply by specifying the candidate's personnel number. You can overwrite this data, if necessary.
Both internal and external applicants can submit unsolicited applications, or apply in response to an advertisement. You assign applicants who file an unsolicited application to an unsolicited application group during initial data entry. An unsolicited application group is a user-definable criterion for use in structuring unsolicited applications. You might, for example, want to structure unsolicited applicants by the activity for which they have applied (salaried employee in Sales and Distribution, for example, or salaried employee in Human Resources).
Hope this solves ur dought,
Reward if helpful,
Regards
Asha

Error while assigning an application to a user

Hi All,
I am new to Oracle Database Lite. I have created a new user and i want to assign a Sample application which comes while installing the mobile server. But while assigning the Sample application to a user through the application page, i got "ERROR: VIRTUAL PATH IS NULL" and when i wanted to assign the Sample application to a user through the user page, i got "Error in executing " Save application ":oracle.lite.web.resource.ResourceException: CONS-10050: Rollback failure: java.sql.SQLException: Io exception: Connection reset by peer: socket write error "
So can any one help me how to resolve this error so that i can assign the application to a user?
Any help is welcomed.
Shrikant

Thanks Scott. I've also been looking for a pattern of consistency that would point to the cause of the problem but have been unable to find one. I was hoping that others may have experienced the same error and could help to shed some light here.
I dug around some and found that the wwv_flows_alias_idx constraint is a unique index on the alias and security_group_id columns of wwv_flows. My application has an alias that is the same for all installations so I thought that somehow a previously used value for security_group_id was being generated causing the unique constraint violation. Can you tell me how that value is generated during the install process? Is it some sort of hashing function?
Thanks

Policy Assignment to AD Groups

Perhaps I'm going about this the wrong way, but can someone explain if this should work or not?
I have ZESM 4.1 IR 1 installed on a Windows 2003 server with a seperate SQL box - all installed and configured fine.
Created a user source pointing at AD, and have a single OU set up with 2 groups that I want to assign the policies to. When I open up a policy and click on the publish tab, I can expand down the AD tree to the OU and can see the relevant groups I've created.
If I then add a user to one of the groups then attempt to publish a policy to the group, the ZESM Management Console says "Policy Assignment Complete", however, if I then right click on the agent on the taskbar and "Check for Update", its saying there is "No Policy Update at this time"
If I assign the policy directly to the user, then it works correctly.
Am I missing something?
The reason I want to restrict it to a single OU and specific named groups is because we've had issues in the past with multiple admins in the system overwriting users policy assignments so I want to try and control policy assignments as much as possible.

Hum, I think you're out of luck.
At least with 3.5 it doesn't refreshes group memberships once they're added to the DB. So, group memberships are only "read" at directory configuration time. You can try this by deleting and re-creating the directory config once you update the group memberships and see if they publish to the correct users.
However, I haven't tried this with the current 4.1. Good news are, this issue is addressed in ZCM/ZESM 11, since we'll be using the LDAP configuration that comes with ZCM.
HTH,
Daniel
>>>
From: andystewartSL<[email protected]>
To:novell.support.zenworks.endpoint-security-management
Date: 8/3/2010 5:16 AM
Subject: Re: Policy Assignment to AD Groups
Forgot to mention, the plan is, if any users are added/removed from the
groups then the policy would be re-published to the group - I'm assuming
this will work also?
Andy Stewart - Somewhere In Scotland
zcm 10.2.2, 4 servers in esx vm environment, 2000 users so far...
(i'd still rather be snowboarding)
andystewartSL's Profile: http://forums.novell.com/member.php?userid=1054
View this thread: http://forums.novell.com/showthread.php?t=417317

Delivery Assignment to Device group in standalone deployment?

Hi,
I am using the standalone deployment of SAP AII 2.1. I have the following two queries regarding assignment of deliveries to device groups.
1. I am able to assign the same delivery to multiple device groups with same business roles as well as different business roles at the same time.
For example, I am assigning the delivery to a device group that handles tag commissioning and I also assign the same delivery to a device group that handles the loading at the same time. Is this the correct behavior?
Or is it that once a delivery is assigned to a device group, it should be first processed by that device group or unassigned before the same delivery can be assigned to a different device group?
If this is the case, then is there any configuration setting in AII that can control the delivery assignment to device groups?
2. Logically I believe that only one delivery can be assigned to a device group.
I assign a delivery to a device group. Then I immediately assign another delivery to the same device group. I believe that the first delivery gets unassigned from the device group, but there is no message to this effect
Again is there any configuration setting for handling this situation?
Regards,
Dhananjay

What you are deploying is a Client Settings policy, not the client itself. This is akin to a Group Policy Object being linked to an OU. The machines in the collection which already have the ConfigMgr client will process those policies, but additional non-client
machines added to the collection will not automatically install the client.
As Torsten indicated, you can deploy the client to these machines using the manual client push method. Simply right click on the clients themselves (or the collection) and select Install Client. If doing it at the collection level, I recommend
against selecting "Always install the client software" in the wizard as it will force an unnecessary repair of the existing ConfigMgr clients. I would recommend testing this on one machine in the collection in question before attempting to do them in bulk.
Note that this requires that a Client Push Installation account be configured (Administration > Site Configuration > Sites > Client Installation Settings > Client Push Installation > Accounts tab) which has admin rights on the clients.
You *DO NOT need to enabled site-wide client push installation* to be able to use the Install Client method in the console. Enabling this will force the client to attempt installation on ALL systems that ConfigMgr sees.

11.1.3 - APS Server does not appear within APS Server Application Group

I successfully migrated from 9.3.1 to 11.1.3 in our DEV environment but their is no entry in the APS Server Application Group within Shared Services. Additionally, I am able to access all forms and run reports but when attempting to provision users in the new environment (comparing user access to Production) I realized that the APS server was not available for provisioning. What can be done to correc this? I am still learning about all of the moving parts so I am not entirely sure how to troubleshoot.
Thanks.
Dan

Hi,
In version 11 there are no provisioning roles for APS, so you shouldn't have to worry about it.
Cheers
John
http://john-goodwin.blogspot.com/

Task Assignment to Ggroup - Group Members Not Getting Email

I have a process with an approval activity with initial user selection set to a group rather than a specific user. I want all selected users to receive an email notification that a new task awaits them. When I assign to a specific user, the custom email template is sent to the user. When I assign to a group, the group members don't get the task assignment email.
How do I change that so that group members will receive email notification of task assignment?
Thanks in advance!
Eric

One possible solution:
You can use our Group Lookup component to get a comma-separated list of the emails of the members of the group. Then, in the step before the User>assignTask step, send the group an email. The only problem is that you won't be able to embed a link directly to the task, because the task doesn't exist yet.
Doc: http://avoka.dnsalias.com/confluence/display/Public/Lookup+DSC
Download: http://www.avoka.com/avoka/escomponents.shtml
To work around this problem, you can use the technique outlined here:
http://blogs.avoka.com/2008/10/20/customize-user-task-escalation-after-assignment/
http://avoka.dnsalias.com/confluence/display/Public/Customize+User+Task+Escalation+After+A ssignment
If you need more assistance, contact info-at-avoka.com
Howard

E-recruiting - Assignment to Application Groups

Similar Messages

Maybe you are looking for