E-Recruiting. Issue with "Modify Fields in Interfaces" (VRCFPHTMLB_FLI_C)

Hi!
When I modify fields in interfaces in the - spro, example:
SAP/HRSCP_REQ_MNT/JOBINFO.BSP                      JOBTITLE                Invisible
nothing change in the page
(htsap/bc/bsp/sap/hrrcf_start_int?sap-client=200&sap-language=RU&rcfSpId=0005)
when i create requisition in the bookmark "General Job Information".
Maybe i forget to change some parameters?

Well,
do not modify those pages at all. After SP you will lose your modifications.
Well have you defined a context which you use for flexibilization?
If no, do it!.
Then you need to add the following parameter to URL &rcfContext=myId
regards

Similar Messages

  • Erec Modify Fields in Interfaces

    Hi,
    I am running e-recruitment version 3.0 and I want to make the fields Address and Telephone number mandatory in the communications tab when going through the application wizard. However these fields do not appear in the customizing settings under the node Modify Fields in Interfaces.
    Has anyone been able to add additional pages into this customizing setting?
    Thanks in advance for your help.
    Thanks
    Tom

    Hi,
    Thanks for your help again. I've looked in SE80 and the field names appear to be dynamically generated.
    <hrrcf:formLayoutInputField id       = "street1_<%= lv_index %>"
    So I tried to use the field name street1_1 for the street name of the first address subtype. However this has no effect when I log in and view this BSP.
    Have you managed to get these fields to be mandatory before? Am I missing any other steps?
    Thanks a lot for your help!!
    Tom

  • ISSUE WITH SUPPLIER SITE OPEN INTERFACE IMPORT PROGRAM in R12

    I am facing issue while submitting supplier site open interface import program programmatically using fnd_request.
    I am uploading the interface tables with the mandatory data and running the standard Request Set for Suppliers.The program is creating the Suppliers but is unable to create the Supplier Sites.It is getting completed with no rejections as well as imported records.
    It is updating the Supplier Sites Interface table (ap_supplier_sites_int ) with status as rejected with no rejected records in ap_supplier_int_rejections table.
    I am using the following code.
    Step 1 - call set_request_set
    apps.fnd_file.put_line (apps.fnd_file.LOG, 'Calling set_request_set...');
    success := fnd_submit.set_request_set ('SQLAP', 'FNDRSSUB852');--'FNDRSSUB1703');
    IF (NOT success)
    THEN
    RAISE srs_failed;
    ELSE
    apps.fnd_file.put_line (apps.fnd_file.LOG,
    'Calling submit program first time...'
    END IF;
    -- Step 2 - call submit program for each program in the set
    success :=
    fnd_submit.submit_program ('SQLAP',
    'APXSUIMP',
    'STAGE10',
    'ALL',
    1000,
    'N',
    'N',
    'N',
    CHR (0)
    IF (NOT success)
    THEN
    RAISE submitprog_failed;
    END IF;
    apps.fnd_file.put_line (apps.fnd_file.LOG,
    'Calling submit program second time...'
    success :=
    fnd_submit.submit_program ('SQLAP',
    'APXSSIMP',
    'STAGE20',
    'ALL',
    1000,
    'N',
    'N',
    'N',
    CHR (0)
    IF (NOT success)
    THEN
    RAISE submitprog_failed;
    END IF;
    -- Step 3 - call submit_set
    apps.fnd_file.put_line (apps.fnd_file.LOG, 'Calling submit_set...');
    req_id := fnd_submit.submit_set (NULL, TRUE);
    IF (req_id = 0)
    THEN
    RAISE submitset_failed;
    END IF;
    apps.fnd_file.put_line (apps.fnd_file.LOG, 'Finished.');
    And in the interface table the record status is rejected and ther is no corresponding record in ap_supplier_int_rejections.
    but the supplier is getting created succesfully.
    ### Steps to Reproduce ###
    INSERT INTO ap_suppliers_int
    (exclusive_payment_flag,
    vendor_interface_id,
    vendor_name,
    segment1,
    vendor_type_lookup_code,-- set_of_books_id,
    status
    VALUES ('N', --'N',
    ap_suppliers_int_s.NEXTVAL,
    'TEST_REC4',
    4428813,
    'VENDOR', --2041,
    --rec_spl_site_bank_hdr.set_of_books_id,
    'NEW'
    INSERT INTO ap_supplier_sites_int
    (vendor_site_interface_id,
    vendor_interface_id,
    vendor_site_code,
    address_line1,
    city,
    state,
    zip,
    country,
    operating_unit_name,
    status --exclusive_payment_flag
    VALUES (ap_supplier_sites_int_s.NEXTVAL,
    -- VENDOR_SITES_INTERFACE_ID
    ap_suppliers_int_s.CURRVAL,
    -- VENDOR_INTERFACE_ID
    'REC_VDR_SITE4',
    -- VENDOR_SITE_CODE
    'REC_ADDR4',
    -- ADDRESS_LINE1,
    'REC_CITY4', --CITY
    'REC_STATE4', --STATE
    3442121,
    'US', -- COUNTRY,
    ' Test US Operating Unit',
    'NEW'
    );

    Hi
    I have the same issue with ap supplier sites interface program .. Did your problem got solved..I will be thankfull for any help
    Thanks

  • Issues with ldap_add via LDAP Interface on WS 2008 R2 from WGM for mounts

    Important Setup Information:
    Active Directory domain on Windows Server 2008 R2
    Extended AD Schema to include apple-* attributes
    Mac OS X Snow Leopard Server 10.6.2 bound to Active Directory
    Connected to Active Directory Forest in Workgroup Manager with Domain Admin / Schema Admin credentials.
    The Issue:
    When attempting to configure a Home path using an SMB URL using the following attributes:
    Mac OS X Server/Share Point URL:
    smb://gio-storage-01.giodivine.com/Users
    Path to Home Folder:
    user 01
    Full Path:
    /Network/Servers/gio-storage-01.giodivine.com/Users/user01
    I receive the following error:
    *Not authorized.*
    This action failed because you are not authorized to perform the operation.
    I checked the console, and found the following (completely useless) error:
    Got unexpected error of type eDSPermissionError (-14120) on line 574 of /SourceCache/WorkgroupManager/WorkgroupManager -361.2.1/Plugins/UserAccounts/UserVolumesPluginView.mm
    I enabled diagnostic logging of the LDAP Interface on the Active Directory server and acquired the following error attributed to the "permissions" issue that Workgroup Manager emits:
    Internal event: Function ldap_add entered
    Internal Event: The LDAP server returned an error.
    Additional Data
    Error value:
    00000057: LdapErr: DSID-0C090C30, comment: Error in attribute conversion operation, data 0, v1db0
    So; it would appear that there is some issue with the Active Directory schema extensions, or that the UserVolumesPluginView module is not referencing the schema correctly. My expectation would be that an apple-mount object be created to describe the mount point in /Network/Servers and that the unixHomeDirectory attribute on the User object would be set to the newly created map point.
    The latter occurs, i.e. the unixHomeDirectory attribute is set to:
    /Network/Servers/gio-storage-01.giodivine.com/Users/user01
    The map point is never created in Active Directory, however. It did create a new container in AD at the root, i.e. cn=Mac OS X,dc=giodivine,dc=com, but nothing is ever created there.
    I have attempted to completely remove all of the extended schema changes, re-compare an OD master against the AD PDC, recreate the schema changes LDF, and re-apply the changes to no avail.
    Any information as to how I can find out exactly what call to ldap_add is being made so that I can somehow track down the faulty schema extension attribute would be helpful. Are there ways to enable verbose diagnostic logging of Workgroup Manager and it's accompanying modules?
    Thanks in advance!
    Deavon M. McCaffery
    <Edited by Host>

    Hi Scot,
    Sometimes a third party backup application will change the default VSS provider adding VSS writers which causes Windows Server Backup using an incorrect component in doing backup, that's why I suggest to delete it for a test. Anyway you can reinstall it
    after testing.
    And as you said a high-load CPU could also be the cause of the issue so you may need to first rule hardware effective out.
    If issue still exists, please try the steps below as well:
    1. Please check DCOM Server Process Launcher service is started.
    2. If not, try to change RPC service to run as SYSTEM account. To do this please modify the following key:
    Note: Backup the key before edit incase it cause any issue.
    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Servic es\RpcSs\
    Find "ObjectName" and change the value to LocalSystem.
    Reboot to see if DCOM back to work and if Windows Server Backup starts working. If not, please provide the result if there is any new error occurs.
    If DCOM still not work, please compare the content of the following key with a working server:
    HKEY_LOCAL_MACHINE\Software\Microsoft\OLE
    Edit if there is any difference and make sure you created a backup of the key before editing. 
    If you have any feedback on our support, please send to [email protected]

  • Issue with custom fields mapping from CRM to ECC.

    Hi all,
    I have issues with replicating custom fields in a Service order. I have created new fields with EEWB and EEWC. Now the structure has been changed in ECC and CRM. But i have to map this fields to correct structures. Also i need some logic to apply.
    But i have addressed in couple of threads about the custom function module as in user exit for FI generation.
    But i didnt understand the concept of this custom function module. why is this been used?
    Could anyone let me know with an good example on how this has to be acheived.
    Points are highly awarded.
    Kindly reply me.
    Thanks,
    Kiran...

    Hi,
    Here you go,
    After you create custom characteristics.
    1. Do Assign category.
    2. Map contents.
    3. Double check your master catalog has the mapped content.
    4. Publish master catalog.
    As per your message, you are not having any error message during import, which tells me that you are one step to close.
    Cheers, Renga

  • Issue with input field in table control

    Hi,
    I have an issue with field acgl_item-rstgr in the table control.
    I have created a screen program with a table control.
    In the control i have added a dictionary field as acgl_item-rstgr.
    When i execute, do f4 on the input field, select a value and press enter, then it is showing me
    error as 'Entry 'val' does not exist in T053R (check entry). Its really weird to understand this. I have selected the value
    from f4 and even then it says this. Its working for all other columns, but not working only for RSTGR.
    Plz help me on this regard.
    Code is like this.
    TYPES : BEGIN OF ty_rstgr,
              rstgr TYPE RSTGR,
             END OF ty_rstgr.
    TABLES : ACGL_ITEM.
    DATA : it_rstgr TYPE TABLE OF ty_rstgr.
    DATA : wa_rstgr TYPE  ty_rstgr.
    CONTROLS : table TYPE TABLEVIEW USING SCREEN 100.
    PROCESS BEFORE OUTPUT.
    MODULE STATUS_0100.
    LOOP AT it_rstgr INTO wa_rstgr WITH CONTROL TABLE.
    ENDLOOP.
    PROCESS AFTER INPUT.
    MODULE USER_COMMAND_0100.
      LOOP AT it_rstgr.
      ENDLOOP.
    Thanks,

    Hi Navitha,
    Its Check Table concepts for the error u stated. Please check wht the Search help ur using...Because for this field there is no search help at value table level...Use search help that hold all master data or create a custom search field in SE11 level or in program level.
    Cheers,
    Naveen

  • Sharepoint 2010 Content Deployemnt Job issue with duplicate fields in User information List

    Hi friends,
    I am facing below issue with the content deployment job.
    It was working earlier. But now since from couple of days all the content deployment jobs in production environment are failing with below error.
    Field name already exists. The name used for this field is already used by another field in the list. Select another name and try again.
    ObjectName="User Information List".
    When I check the fields in User information list in targeted site, I found couple of columns are dupicate like "ask me about",first name","Last name" etc.
    Do i Need to drop target site collection or recreate with fresh content deployment job.
    Please suggest.
    Please help .
    Regards
    Subrat

    Hi,
    According to your post, my understanding is that you got duplicate field error.
    Based on the error message, you can try to use the following code sample to remove duplicate records, and check whether it works:
    http://social.msdn.microsoft.com/Forums/en-US/sharepointgeneralprevious/thread/41ee04bd-91fb-4bf9-932a-bac42c56c357
    Here is a similar issue, you can also use the ‘RemoveDuplicateColumn64’ provided:
    http://sharepointsurfer.wordpress.com/2012/04/27/how-to-fix-publishing-site-content-deployment-error-duplicate-first-name-column/
    What’s more, as you had said, you can recreate a site with a fresh deployment job.
    Thanks & Regards,
    Jason
    Jason Guo
    TechNet Community Support

  • Issue with dropdown fields

    Hello All,
    I have following issue with Complaints application.
    Issue - We have done some enhancement using EEWB and added some fields on 'Products' tab under complaints. After that we have made some of those fields as dropdown fields in the corresponding 'Field Group'.
    My problem is now I can see those dropdowns in line display under 'Products' tab but when I switch to Form view I don't see those dropdown for the corresponding fields, instead those fields appear as input text fields.
    One more thing is some of the fields I can't see in the line view (Item, Product ..) which I see in form view.
    Any help would be highly appriciated.
    Thanks.
    Amit Kade

    Hi Fausto,
    According to your description, my understanding is that the drop-down list boxes of the lookup column became wide when using IE 9 or 10.
    Did you customize the list form in InfoPath?
    Per my test, the width of the drop-down list boxes can be customized in InfoPath.
    I tested in my environment, and the lookup column worked fine in IE 9 or 10.
    I recommend to add the SharePoint site to Compatibility View in IE to see if the issue still occurs.
    Best regards.
    Thanks
    Victoria Xia
    TechNet Community Support

  • E-Recruiting.Issue with search criterion in the TRM.

    Hi all! I have some issue with search in the TRM. I want to search by range criterion.
    Example: i want to find candidate whose age between 20 - 35 years old, but in the E-Recruiting i didn't find decision how to realize this.

    Hi,
    yes you are right. I forgot that.
    But I think it is only possible if you activate SES instead of old XML based search.

  • Issue with Region field in BW report

    Hi experts,
    I am facing an issue with BW Report ,the data for REGION for some billing doc no are showing as # and its description is not assigned.Also there is no data for region in its data target as well and also no data in VBRK table for those billing doc no in R3 side.
    Can you please suggest some solution.
    Thanks for help in advance.
    Regards
    NP

    Hello -
    If there is no data for charecteristic values,. #  and not assigned will be dispalyed in the report.
    Its BW funcnality,.
    If you would like to remove the # values  in BEX you have to go for a Macro,.
    If in WAD you have to eliminate the first values in the repactive web item.
    Regards,
    Vishwa.

  • Having 2 small issues with 10.4.3 interface - shift click & control click

    I am having two issues with 10.4.3 on my mom's computer.
    1) I Control-Click the mouse and I do get a shortcut menu on the desktop, on icons, etc. How can I get this back? I can not seem to find a preference that sets this.
    2) I am in iPhoto and would like to select multiple film rolls (consecutive rolls) by clicking the first and then clicking the last one that I would like and it is working like I am comand clicking and only selecting the two rolls that I have clicked on and not the ones in between.
    Any help in how to work this out would be great.
    Happy Turkey Day!
    K

    1) I Control-Click the mouse and I do get a shortcut menu on the desktop, on icons, etc. How can I get this back? I can not seem to find a preference that sets this.
    Do you have any third-party items in:
    /Library/Contextual Menu Items/
    /Users/YourUsername//Library/Contextual Menu Items/
    If you do, try dragging them onto your Desktop and then retry control-clicking.

  • Issue with 'modified by' on LiveCopies

    Hello everybody,
    we're facing a slightly perplexing issue on our CQ5.4 installation: when using 'Rollout Page', the page is rolled out to the correct livecopies, and the 'Modified' columns on the livecopies correctly show the author that performed the rollout.
    If we use 'Activate Page' to both roll-out and activate the page, the livecopies get updated correctly... except the 'Modified' column says 'admin' instead of the correct author. The jcr:lastReplicatedBy property on the blueprint page is correct, though.
    Is this by design, a misconfiguration on our part, or a bug/forgettance in CQ5.4?
    A few more details on our setup, in case it's necessary:
    Our global/corporate site is set up as a blueprint for each of our ~100 regional sites. The "Current Live Copies" section in the "Blueprint" tab correctly shows the livecopies. Our "Rollout Configs" is set to use the (OOTB, afaik) "Standard rollout config" and "Rollout on activation config" options, in that order.
    The corporate site is English-only (let's say it's located under /content/global/en, with both "global" and "en" using our "Hompage" template). The livecopies are dumped into /content/regionXX/en, from where the regional authors use a translation workflow to update their language copies with the new material.
    PS: this message has been cross-posted to the CQ5 google group and the Adobe CQ5 forum.

    with t1 as (
                select 100 reqno,'pss' code from dual union all
                select 200,'css' from dual union all
                select 300,'rss' from dual
         t2 as (
                select 100 reqno,1000 updated_by,to_date('12-apr-2011','dd-mon-yyyy') update_date from dual union all
                select 200,2000,to_date('13-may-2011','dd-mon-yyyy') from dual union all
                select 300,3000,to_date('14-jun-2011','dd-mon-yyyy') from dual union all
                select 100,4000,to_date('15-jul-2011','dd-mon-yyyy') from dual
    -- end of on-the-fly data sample
    select  t1.reqno,
            t1.code,
            max(t2.updated_by) keep(dense_rank last order by update_date) updated_by,
            max(t2.update_date) update_date
      from  t1,
            t2
      where t2.reqno = t1.reqno
      group by t1.reqno,
               t1.code
      order by update_date
         REQNO COD UPDATED_BY UPDATE_DA
           200 css       2000 13-MAY-11
           300 rss       3000 14-JUN-11
           100 pss       4000 15-JUL-11
    SQL> SY.

  • Issue with Varchar2 field conversion for report output generated in EXCEL

    Hello All,
    I have an unique problem with one of my new reports for the User. The user wants the report output generated in excel data only(delimited data) format *(reports builder 10g)* .
    Everything was fine until i encountered this problem, there was this field which has unique ID's(alphanumeric and numeric), when i tried to run the report and generate output in Excel the numeric ID's say for example *(41593497999679354429)* is converted in excel and displayed like *(2.5881E+19)* and after format cells in excel it displays *(41593497999679300000).*
    The issue is only with 20 digits numeric ID's , if i append any special character to the end say '#' or '..' it shows the exact value along with the appended character. But the user insist they need only the value that is in the table. I am finding it hard to figure out, if any one of you have encountered the same issue or if any of you have any suggestions to overcome this excel conversion thing please do advice me.
    Thanks in advance :)

    Thanks for you response, but i already tried what you suggested, instead of appending single quote in front of ID, i did at the end prior with '#', it preserves the value if i add any character to the id but the appended value shows up too :(.
    Well, i just got the solution and it did work, thanks to [Brian Hill|https://forums.oracle.com/forums/thread.jspa?threadID=651632] for the post, i did what exactly he said and it worked. I was so very happy and wanted to share with everyone.

  • Access 2010, Sharepoint 2010 issue with adding field to access db table

    I needed to add an additional field to one of my access tables contained in the sharepoint list. 
    My application is a front end Access DB (run locally), and the backend is the 'data' database contained in the sharepoint lists.
    I added the field to the database (called BOM).  When I open the access list (from sharepoint) , and also look at the database in access, the field is there and things are fine.
    However, it does not show up in my linked front end.  I deleted the linked sharepoint tables from my front end, and then re-imported.  Now I see the BOM field I created, but it has replaced the 'ID' field, which was the primary key.  I had
    added the 'BOM' field as the last field in the table.  Now it is the first field, having replaced the 'ID' field. 
    What's going on here? 
    Thanks in advance!

    Hi,
    This is the forum to discuss questions and feedback for Microsoft Office, and the issue more related to Sharepoint 2010, I'll move your question to the Sharepoint 2010 forum
    http://social.technet.microsoft.com/Forums/sharepoint/en-US/home?forum=sharepointgeneralprevious
    The reason why we recommend posting appropriately is you will get the most qualified pool of respondents, and other partners who read the forums regularly can either share their knowledge or learn from your interaction with us. Thank you for your understanding.
    George Zhao
    TechNet Community Support

  • Issue with the field (Trading Partner) in the BW report

    The Info Object 0PCOMPANY (Trading Partner) is having a reference char 0COMPANY in the BW system so the data for the field Trading partner text will be pulled from 0COMPANY_TEXT data source.
    I have checked in the info object 0PCOMPANY in the tab master data / Text under text table properties it has checked in the medium length text exists.
    Even i have checked with R/3 consultants and found the data for all of trading partners but i am not clear where i have to investigate on this issue.
    Now the values for the field Trading Partner were not displayed in the report i have checked the properties of the field and found display as Standard: key and text.
    Any help will be appreciated in advance.
    Thanks
    Ganni

    Hi,
    set the propety "display" to medium text for this charateristic either in the BEx report itself either in the query definition.
    Ensure that the text are well loaded (run tran RSDMD with this IObj in norder to display master data)
    Only having meduim texts will prevent you to display "key and texts" in reports.
    You could enhance your IObj and enable short/long texts as well; in the transfer rules just load the medium text in short (truncate its length to 20) as well as in the long text.
    hope this helps...
    Olivier.

Maybe you are looking for