Erec Modify Fields in Interfaces
Hi,
I am running e-recruitment version 3.0 and I want to make the fields Address and Telephone number mandatory in the communications tab when going through the application wizard. However these fields do not appear in the customizing settings under the node Modify Fields in Interfaces.
Has anyone been able to add additional pages into this customizing setting?
Thanks in advance for your help.
Thanks
Tom
Hi,
Thanks for your help again. I've looked in SE80 and the field names appear to be dynamically generated.
<hrrcf:formLayoutInputField id = "street1_<%= lv_index %>"
So I tried to use the field name street1_1 for the street name of the first address subtype. However this has no effect when I log in and view this BSP.
Have you managed to get these fields to be mandatory before? Am I missing any other steps?
Thanks a lot for your help!!
Tom
Similar Messages
-
Hi!
When I modify fields in interfaces in the - spro, example:
SAP/HRSCP_REQ_MNT/JOBINFO.BSP JOBTITLE Invisible
nothing change in the page
(htsap/bc/bsp/sap/hrrcf_start_int?sap-client=200&sap-language=RU&rcfSpId=0005)
when i create requisition in the bookmark "General Job Information".
Maybe i forget to change some parameters?Well,
do not modify those pages at all. After SP you will lose your modifications.
Well have you defined a context which you use for flexibilization?
If no, do it!.
Then you need to add the following parameter to URL &rcfContext=myId
regards -
Free Good Qty as non modifiable field in the Sales Order Level
Dear Friends,
I have successfully done the config change for the Free Goods, But now i want make the free good line item qty as a non modifiable field in the Sales Order Level.
How can i do this.. Please advice.
Thank U,
UwanthiHi
This is a standard behaviour in the system
kindly use the below program and user exitexit
MV45AFZZ and use "Userexit_filed_modification"
Regfards
Damu -
I am having a problem using SetProperty to modify fields in a multipage pdf file.
First i use xmpMeta.DumpObject ( DumpCallback, sLogFile );
to dump the existing data to a terminal window.
At first run this works fine and i get the existing value set in the Category field of the "Categories" Panel.
Next i use xmpMeta.SetProperty ( kXMP_NS_Photoshop, "Category", "2" );
to change the value of a field and then call xmpFile.PutXMP ( xmpMeta ); to save the file.
When i open the file again in my test application the data is empty when doing the dump to the terminal window.
If I open it in acrobat, however, the data is there. I am some how corrrupting the data when wrtiting it. Can anyone help quide me as to what I may be doing wrong?
here is a sample of my code:
static void EditProperties ( const char * fileName )
bool ok;
SXMPMeta xmpMeta;
SXMPFiles xmpFile;
XMP_FileFormat format;
XMP_OptionBits openFlags, handlerFlags;
XMP_PacketInfo xmpPacket;
xmpFile.OpenFile ( fileName, kXMP_UnknownFile, kXMPFiles_OpenForUpdate );
ok = xmpFile.GetFileInfo ( 0, &openFlags, &format, &handlerFlags );
if ( ! ok ) return;
ok = xmpFile.GetXMP ( &xmpMeta, 0, &xmpPacket );
if ( ! ok ) return;
// Remove extaneous properties to make the dump smaller.
SXMPUtils::RemoveProperties ( &xmpMeta, "http://ns.adobe.com/camera-raw-settings/1.0/", 0, true );
SXMPUtils::RemoveProperties ( &xmpMeta, "http://ns.adobe.com/tiff/1.0/", 0, true );
SXMPUtils::RemoveProperties ( &xmpMeta, "http://ns.adobe.com/exif/1.0/", 0, true );
SXMPUtils::RemoveProperties ( &xmpMeta, "http://ns.adobe.com/exif/1.0/aux/", 0, true );
SXMPUtils::RemoveProperties ( &xmpMeta, "http://ns.adobe.com/pdf/1.3/", 0, true );
SXMPUtils::RemoveProperties ( &xmpMeta, "http://ns.adobe.com/xap/1.0/t/pg/", 0, true );
SXMPUtils::RemoveProperties ( &xmpMeta, kXMP_NS_XMP, "Thumbnails", true );
SXMPUtils::RemoveProperties ( &xmpMeta, "http://purl.org/dc/elements/1.1/", 0, true );
SXMPUtils::RemoveProperties ( &xmpMeta, "http://ns.adobe.com/xap/1.0/", 0, true );
SXMPUtils::RemoveProperties ( &xmpMeta, "http://ns.adobe.com/xap/1.0/mm/", 0, true );
SXMPUtils::RemoveProperties ( &xmpMeta, "http://ns.adobe.com/pdfx/1.3/", 0, true );
//dump the data
fprintf ( sLogFile, "\n:::::::::: Initial XMP from %s ::::::::::\n\n", fileName );
xmpMeta.DumpObject ( DumpCallback, sLogFile );
//change the properties
xmpMeta.SetProperty ( kXMP_NS_Photoshop, "Category", "2" );
//dump it again
fprintf ( sLogFile, "\n\n:::::::::: Modified XMP from %s ::::::::::\n\n", fileName );
xmpMeta.DumpObject ( DumpCallback, sLogFile );
xmpFile.PutXMP ( xmpMeta );
xmpFile.CloseFile();Are any of you going to the Adobe Developer Conference scheduled to be held for plugin providers at San Jose on Nov 7/8?
-
When does Date Modified field update in cmc XI3.1
In CMC > users and groups
there is a Date Modified field, When does it update? Is there any document describe that?
For example
I have test that when I edit a user's properties the Date Modified fields update.
When a user log onto CMC, some time the logon times is update as Date Modified
some times is not? Why does this happen?Hello,
If you update the the properties of the group or the user then the last modified date will change to the current date/time. What kind of user do you have, Enterprise, Windows NT, Windows Active Directory or LDAP. Sometimes a user doesn't exist until they actually log on to the CMS then their Last Modified date would change. Have you consistantly seen this happen with a specific user, if so can you reproduce this on demand.
Jorge -
Hello All,
I have a requirement where in I need to modify fields of me21n based on a condition:
if the user enters a value in the field: MEPO1211-KONNR (Contract no./Number of principal purchase agreement) , then all the conditions (From KOMV table) fileds & all the Pricing terms should be disabled for change/input i.e. should be in display mode.
I tried to search for an exit for this but could not find an appropriate one to modify screen fields however, the alternae to this requirement is :
If the user enters a value in the field: MEPO1211-KONNR (Contract no./Number of principal purchase agreement) , then on entry of the conditions(TABLE KOMV) fields and pricing terms user should get an error message so that he cannot proceed.
Please suggest me a solution for any of the above two requirements.
Any help on this would be highly appreciated.
BR
AnkurHi,
Why dont you check with the enhancement project LO020 in CMOD.
Hope this would help you.
Or use the class CL_EXITHANDLER to find out the BADI used in ME21N for your requirement.
Regards,
Ranjith Nambiar -
7.6.2 stutters on some known good songs then Date Modified field is updated
Hi All,
I've just noticed some very peculiar behavior in my 7.6.2 iTunes library on my Leopard MacBook. While clicking around on some songs in my library (~51,000 songs) directly, iTunes will hesitate (ie stutter) at the beginning of the song and then resume playing it. This does not occur on every song in my library though, and appears to repeat itself say on 80% of my songs, now. Occurs in playlists, as well.
I remembered that by adding album art to an album (a manual cut and paste job) to a selection of files while one is playing...and when that particular file gets updated with the bitmap...that I would hear a similar stutter.
So, I opened a Finder window to view an actual file before I clicked it in iTunes. Sure enough, on a stuttering song, the Date Modified field in iTunes and date/time stamp of the file in Finder get updated with the Current Day time. I have no idea what would cause that file to be changed ! Plus, this does not happen with every song.
I do have numerous Smart Playlists and several AppleScripts, but when this occurs, I'm not actively running any of these.
Anyone have any ideas on this...and I thank you for your help and ideas....
-ESitunes 7.6.2
I had the same annoying problem: iTunes would hesitate at the beginning of a song and then resume playing it. This affected ALL tracks in my 17,000+ library. No quarter.
My fix was to uncheck crossfade playback in preferences. I have never used sound check nor sound enhancer so those boxes remained unchecked.
Worked for me and ALL tracks play now with no stutter.
Hope this helps some. -
"Date Created" or "Date Modified" field for Contacts?
Is there any way to view -- or sort by -- a "Date Created" or "Date Modified" field in Contacts?
Or, at the very least, view a single records Date Created/Modified?
In particular, when exporting the BB's Contacts to an ASCII, I'd love that field to appear.
Thanks,
MooShooWhen I open a search window (command "F") and then press Command "J" or go to "Show View Options" under the "View Menu" it just brings up a window that says: "There are no view options for the "Searching This Mac" window"
I am using OS 10.5.8 on a 1st Generation MacBook Pro. I have successfully changed view options in other folder windows, but can't in the search window. I have just started trying an Application called "Find Any File" (http://apps.tempel.org/FindAnyFile/) and it looks like it may provide what I want but is MUCH SLOWER than spotlight. -
Hi,
I am trying to change delivery quantity using BAPI_OUTB_DELIVERY_CHANGE. When I tested the BAPI by giving values in the parameters
HEADER_DATA, DELIVERY, ITEM_DATA and ITEM_CONTROL it is working fine.
However when I use the same BAPI in program and when I am trying to test it I am receiving error 'E/VL/280' (
Required field in interface to delivery update missing &1 &2 &3 &4).
Request to please help me out on how to resolve.
Much Appreciated.Hi Nagarjuna,
Can you please check the program in debugging mode, &1 &2 &3 &4 are the place holders specifies some information. Might be missing some information while changing delivery document.
Check the place holders in debugging mode.
Thanks,
Ashok. -
Dynamically creating/modifying fields
Hi there,
I'm having difficulty dynamically adding or modifying fields in a report using XML.
My sample report selects all the fields in a table (select * from TableName;), where some of the fields are mandantory for the report. The other fields are optional and selected by a user at runtime.
So, a user selects the optional fields and passes them in as parameters. I check the parameters in the "After Parameter Form" trigger and, if they're set, I try to add or modify a field in the report using some XML, such as:
<report name="Test1" author="Mark Kennedy" DTDVersion="1.0">
<layout>
<section name="main">
<field name="F_UDC1" source="LOCATION">
</field>
</section>
</layout>
</report>
The above XML tries to dynamically set the source of the field to LOCATION, which is one of the fields in the database table.
If F_UDC1 exists in the report, I get an error message: "REP-0002: Unable to retrieve a string from the Report Builder message file." If F_UDC1 doesn't exist, nothing happens. No new field is created or shows up in the report.
Any ideas on what I'm doing wrong? Thanks!
Mark Kennedy
[email protected]Scott,
You should be able to do this with a report. You can make columns in a report into text boxes. I'm not sure exactly what I would do, but if you do something like
select null c1, null c2, null c3, null c4 from
user_objects where rownum <= :P123_NUM_ROWS
you should get for null columns. Now go edit each of those columns and make them text fields.
You can then submit the page and use the htmldb api's to get the values of those text boxes.
You might also use a collection . . . I'm just thinking as I type, but this should give you some ideas.
Anton -
Modify field selection for field "Reservation/Purc.req" RESBD-AUDISP
I have alredy modify field in network using OPUA (field selection network header) and set the field "Reservation/Purc.req" CAUFVD-AUDISP make it to only display. But I need to set also the field "Reservation/Purc.req" RESBD-AUDISP to make it display. How can I do that?
Hi,
Business functionality is switched off.
Check this link:
<link removed by moderator>
and search OPS_PS_CI_1 under ENTERPRISE_BUSINESS_FUNCTIONS in SFW5 TCODE and check whether it is switched on or off.
Regards,
Harsh.
Edited by: Virendra Pal on Oct 19, 2010 2:03 PM -
LE_SHIPMENT_BADI : method : At_Save, modify fields
Hi,
We can not change the vtrlk-trmtyp field.
We can use the LE_SHIPMENT_BADI, method is at_save.
Where is fault ?
if CHA_SHIPMENTS_AT_SAVE is initial.
CHA_SHIPMENTS_AT_SAVE = IM_shipments_AT_SAVE.
loop at cha_SHIPMENTS_AT_SAVE-new_vtrlk into waa_vtrlk .
waa_vtrlk-trmtyp = 'Z700'.
modify CHA_SHIPMENTS_AT_SAVE-new_vtrlk from waa_vtrlk.
endloop.
endif.
Thanks.Hi,
Check & Pass the correct indicators in FLAG_TRA_COMPLETE.
A Shipment data incomplete
B Changed shipment data complete, incomplete data missing
C All shipment data complete and available
No statement on completeness
Check & Pass correct vaue in TRA_SAVE_CALLER
FC Update of shipment costs
MASS Mass change for shipment VT06
LREG Register list
LCOM Complete list
IDOC IDoc inbound
TPS Transportation planning interface
CFP Freight planning by forwarding agent
IAC0 Tendering (old)
IAC Planning and tendering via Internet
MOB Status message via mobile devices
DIA Shipment dialog
DIA0 Shipment dialog (old)
COLR Collective processing for shipment
BAPI BAPI access
APO APO transportation planning
MOB_RF Radio frequency in shipment -
To modify field value in a transparent table
how would i modify the value of a field in a transparent table? my data is from internal table. while im looping in the internal table the data goes to the first record of the table not on the right record.
what wrong with my code?
loop at i_tble.
wa_tble = i_tble.
select single angnr
into i_angnr
from ekko
where ebeln eq wa_tble-ebeln.
ekko-angnr = wa_tble-angnr.
modify ekko.
endloop.Hi,
I am sorry but I didn't understand the purpose of this code. You are reading in a field value of ANGNR from EKKO and you want to update the same record again with the same value? Why?
<b>Secondly, you should never update any SAP table directly like that</b>.
Now for the reason why your update is updating the first record always.
Your 'modify ekko' should be modified as
MODIFY ekko TRANSPORTING angnr WHERE ebeln = wa_tble-ebeln.
Please reward and close the post if answered.
Regards,
Srinivas -
Trigger alert on basis of certain field in interface
Dear Experts,
This is a concern regarding sending Alert to users by mail in XI.
IDOCs are reaching XI.The validations are not done in the Sender Side.
For a certain field of the IDOC, the permitted values are 2/3/4 . If user passes some other values or a blank value , an Alert mail needs to be triggered .
We have succeeded in sending alert for failure of a particular Interface, but we have no idea , how to read certain field of a message interface and how to trigger the alert on that basis.
Please suggest.
Regards,
Navneetyou can use udf
package com.guarneri.xi.mapping.udf;
public class CustomMappingException extends RuntimeException {
public CustomMappingException() {
super();
public CustomMappingException(String message) {
super(message);
public CustomMappingException(Throwable cause) {
super(cause);
public CustomMappingException(String message, Throwable cause) {
super(message, cause);
Throwing Smart Exceptions in XI Graphical Mapping
/people/alessandro.guarneri/blog/2006/01/26/throwing-smart-exceptions-in-xi-graphical-mapping
Use a UDF to throw the alert. Have a look at Bhavesh's weblog on how to do this.
/people/bhavesh.kantilal/blog/2006/07/25/triggering-xi-alerts-from-a-user-defined-function
package com.guarneri.xi.mapping.udf;
public class ExceptionThrower {
public static void fire(String message) throws CustomMappingException {
throw new CustomMappingException(message);
Here the UDF will throw if the input a has blank or does not contain permitted value 2/3/4
imports com.guarneri.xi.mapping.udf;
function myudf(String a, Container container)
if (a.length==0 || a.trim().length()==0)
ExceptionThrower.fire("Blank input");
int num[]={2,3,4};
int flag=0;
for(int i=0;i<num.length;i++)
if (a!=num<i>)
flag=1;
if (flag==1)
ExceptionThrower.fire("Permitted values are 2/3/4");
else
return a; -
Production Order - Modify field Material Provision Indicator for component in the production order
Good afternoon,
I have a component in the bill of material, that has the option Material Provision Indicator activated.
When i create the production order, the component automaticaly is activated with the Material Provision Indicator option.
However, in the production order, this field isn't possible to modify, because is closed.
Anybody knows way the modify this field? Configure to open?
Thanks.
Kind Regards,
António PinhoHello Amar,
I am also getting the same error while Releasing Production Order and Costing (CO11N). This error is related to EHP7 in our case.
Please try one of the following solution and see whether the error is gone or not.
1. Implement the SAP Note 1317551 - Error AD_SUBCON 141 / 143 / 144 (T417)
OR
2. Complete the customizing of Material Provision Indicator (T Code OICO) as per the attachment.
Regards,
Prashant Karanjgaonkar
Maybe you are looking for
-
Manual production order creation in MTO
Dear collegues, I am stuck in a scenario: I have a finished item A. strategy 20 is used.I created sales order for A in plant 1000. MRP run in plant 1000 happens. Through special procurement key 40, system generates planned order in plant 2000. Planne
-
How do i show hidden files on my usb on the imac (not to delete)
i am trying to use the usb for the xbox and it keeps asking me to format so i just need to move the files from the usb untill it is all done
-
How to drop datafiles and contents
how to drop datafiles and contents without dropping tablespace?
-
Query Custom Attribute List of Values
Hey All, Is there a way I can get the list of values from a 'list' or 'radio button' custom attribute. Even if it's the string with | seperators, I can parse it out. Any help would be appreciated.
-
Reboot (Restart) my macbook air 11 late 2010
Does any body know how to reboot your macbook air so that their nothing on it and i dont mean cleaning it i meaning take all the things that you have put on it like pictures and all that? any suggestions