E1200 - the Partial Reponse Mystery

Hi all, I have a perplexing problem I've never seen. Ideas? Solutions? I'd love to hear them all. 
The bug:
HTTP(S) responses hang indefinitely partially through the response, but only over wireless. 
The setup:
Linksys E1200v2, purchased 3 weeks ago, has the latest firmware (2.0.06)
WPA2 Personal
Details:
I've been debugging this via Fiddler and Charles. Here is exactly what happens.  For certain URLs, (only a few), the HTTP request sends find, the HTTP response begins correctly, but then somewhere in the first 50 KB of response, the request hangs. It never timeouts. It never terminates. It just hangs.
I've noticed at least twice.
1- YouTube requests. When attempting to transfer video/mp4 from *.googlevideo.com, the request dies at 13140 bytes. If I plug in an Ethernet, it works. This is true for two different laptops. It's always 13140 bytes.
2- SpeedTest.net When attempting to download jQuery.js from c.speedtest.net, the request dies at 37922 bytes. As before, this is only over WiFi.
Other URLs work just fine, and websites load correctly 90% of the time.
I've updated firmware, done factory resets, tried 30/30/30 resets, changed WiFi encryption and MTU, turned off UPnP and WMM, but nothing chnages. WiFi chokes and hangs. 
So, any ideas?

Hi, 
I was able to observe this before but with mediafire's servers using Dolphin Browser on Linux. It won't actually kill the connection, it will just stay on 'waiting..' status on Dolphin and it will resume if I'll switch from wireless to wired connection. I guess this has nothing to do with E1200 as I've observed this using an ASUS RT-N10U configured as an access point with Shibby's version of Tomato Firmware.
I believe this is something within the WLAN standards and it's present on 802.11n. I can try to check this on my WRT54G v5 flashed with micro version of DD-WRT firmware - if it's also happening with 802.11g, but the question is - why? 
If everyone needs to believe in something, I believe I'll have another beer..

Similar Messages

  • As of noon today, when I try to access my Yahoo mail, the encrypted icon appears & then disappears showing the "partially encrypted" so can't sign in. .

    The "partially encrypted" icon is not orange (it is grey), however it is like the icon shown as "unencrypted" and when clicked on reflects the "partially encrypted message". I have spent hours trying to determine what the problem is. The "normal padlock" appears first (has always been grey), then immediately disappears and the triangle shaped icon is there. Any and all advice will be sincerely appreciated as I do not know if the site is secure or not (although it does show the "https" in the address.
    I have used Firefox for more years than I can recall, and never encountered a problem like this.

    In case the problem is an old style sheet or script, or an obsolete cookie setting, try clearing your Firefox cache and deleting your saved cookies for the site.
    (1) Bypass Firefox's Cache
    Use Ctrl+Shift+r to reload the page fresh from the server.
    Alternately, you also can clear Firefox's cache completely using:
    orange Firefox button (or Tools menu) > Options > Advanced
    On the Network mini-tab > Cached Web Content : "Clear Now"
    If you have a large hard drive, this might take a few minutes.
    (2) Remove the site's cookies (save any pending work first). While viewing a page on the site, try either:
    * right-click and choose View Page Info > Security > "View Cookies"
    * Alt+t (open the classic Tools menu) > Page Info > Security > "View Cookies"
    In the dialog that opens, you can remove the site's cookies individually.
    Then try reloading the page. Does that help?

  • Visual Studio 2012 SharePoint Project Error : The partial project item type does not have a value for this property

    Hi,
    I am getting this error from visual studio 2012 whenever i try to create the following project types:
    - Workflow Custom activity
    - Web parts
    The error is as mentioned below
    "The partial project item type does not have a value for this property"
    Due to this the when I add above type of items in my project, they show a red cross icon against them.
    Please let me know If have you any solution?

    Hi
    I had same issue. Below is the solution
    Installing
    "Visual Studio 2012 Update 3" usually solves this problem. (You can download it through microsoft's official site at
    "http://www.microsoft.com/en-in/download/details.aspx?id=39305")
    Hansraj Rathva

  • How to do the Partial delivery for configurable material ?

    Hi All,
    I am creating a sales order  for a configurable material and is trying to do the partial delivery for the same. But, after the outbound delivery the status of the sales order is shown as completed although I have done the partial delivery.
    Here are the steps I followed.
    1. material I used here is a configurable material.
        Main settings.
      a. In Basic Data tab, marked as configurable
      b. Procurement type='E' in MRP 2 tab
      c. Strategy group as 82 in MRP 3 view.
    2. I created a sales order for quantity 10
    3. Created a production order followed by goods Movement thereby increasing the stock.
    4. Did the outbound delivery for  quantity 5.
    Now if I checked for the status of the sales order using VA02, the status for the line item as well as for the sales order was "Completed" although I had done partial delivery.
    I have checked for setting in Customer master record, item category in VOV7. Everything seems to be fine.
    I checked for all the information in the FORUM without any help.
    Can you please help me?
    Kind Regards,
    Anupama

    Hi,
    For Info, I am creating a sales order for Item category TAC.
    1. In my case, after completing the partial delivery, in the document flow for Order, the status is shown as completed.
    2. In status overview for this item, delivery status indicator is set as  'Fully delivered'.
    I did check in the customer master record and the field
    Partial delivery per item  is set to Blank(  Partial delivery allowed)                
    3. I did run the report RIBELF20  and I am getting this error for all the sales order I created for partial delivery for configurable material.
    For Normal item, the status is showing properly.
    Is there any other settings I have to check?
    I needed this to be working. Please help

  • Processing data for a remote command failed with the following error message: Error occurred during the Kerberos reponse.

    Hi!
    We have 5 Exchange 2013 servers and when I’m trying to run a script that includes the cmd-let Get-MessageTrackinglog with StartDate = the first of the month and with EndDate = the end of the month I get the following error message after
    a couple of hours. The script is run on the server SERVER01 and goes through the Message Tracking logs of all Exchange servers. I have tried the script on other servers and get the same result.
    Processing data for a remote command failed with the following error message: Error occurred during the Kerberos reponse.
    [Server=SERVER01, TimeStamp = 918/2014 19:32:34]
    For more information, see the about_Remote_Troubleshooting Help topic.
        + CategoryInfo         
    : OperationStopped: (server01.domain.com:String) [], PSRemotingTransportException
        + FullyQualifiedErrorId : JobFailure
        + PSComputerName       
    : server01.domain.com
    I have gone through “about_Remote_Troubleshooting Help topic”, but can’t find anything related to my issue. There is nothing in the Application or the Windows PowerShell log either.
    /Henrik

    Hi Henado 
    Check the time on your Exchange server(s) relative to the DCs and ensure they are in correct sync
    Use another account which is assigned the Organization Management permission and log to to the server run the command in shell and see the results
    Run 
    Add-PSSnapin -Name Microsoft.Exchange.Management.PowerShell.E2010
    Set-Adserversettings -ViewEntireForest $True and then run message tracking command and see the results
    If none of the above helps you may need to remove and re-install the WinRM and see the results
    Good Luck :)
    Remember to mark as helpful if you find my contribution useful or as an answer if it does answer your question.That will encourage me - and others - to take time out to help you Check out my latest blog posts on http://exchangequery.com

  • Reg: how to reverse the partial cleared items

    Hi Gurus
    1) how to reverse the partial cleared items
    and
    user posted wrogly below:
    2) actually amount received against invoice but she posted in f-02 insted of f-28 so how to reverse this

    Hi,
    I think you should do the following:
    1. T.code - FBRA - to reset the cleared document.
    2. T.code - FB08 - to do the reversal after resetting.
    See if it helps.
    Regards,
    SGP

  • Full freight value for the partial GR

    Dear All,
    I want to post full freight value for the Partial GR quantity. How do I do it? Freight condition is quantity based.
    For example, if I have 100 Ea in the PO and I receive only 95 and GR only 95 Ea. But, I want to post the full frieght value.
    Your help is highly appriciated.
    Thanks,
    Muthuraman.K

    Hi Muthuraman
    Make fright condition on header level  Or make it fixed value in M/06--> control date 1 and keep it in item level.
    Regards
    Ravi

  • Reset and Reverse the partial payment/receipts

    Dear Friends
    kindly advise me how to reset and reverse the partial payemnt/receipts
    Thanks
    Regards
    Madhu

    Hi
    use the FBRA transaction code for reset and reverse the payment document.  give the payment document number in FBRA transaction after execution system will give the message "reset" or reset and reverse"  select as per your requirement.
    hope this will solve your problem.
    Regards
    Ram

  • Can we restrict the partially confirmed production order from getting delet

    Dear all,
    Can we restrict the partially confirmed production order from getting deleted?
    I.e. if the production order is having status PCNF then the deletion flag indicator (status DLFL) should not be allowed to set
    SmanS
    Edited by: SAP PP Consultant on Feb 4, 2009 6:12 AM

    Hi,
    Then must be there is change in BS22.Check allowed transaction setting for Status PCNF/CNF .For reference purpose compare it with other client IDES or sand box.
    For your reference I have pasted Error log on the same.
    Balance of ORD 1000000702 is not zero
    Message no. KO115
    Diagnosis
    The balance on object ORD 1000000702 is not zero. That is, there are still costs on the object.
    System Response
    The object cannot be closed and the deletion flag must not be set.
    regards,
    Dhaval

  • Where are the partial downloads stored?

    Hi,
         I was downloading Xcode for Lion from MAS. The download was almost 90% complete and then my Mac shut down because the battery ran out
    (strangely, it didn't go to safe sleep/hibernate ). Can I restore the partially downloaded file from a Time Machine backup? If not, then I will have to start over again.
    – h.v.d.

    I am lost.  I don't even see the reply tab to answer I hope this continues the conversation..  I frequently listen to radio talk shows that have already been broadcast.  I have the option of listen or
    download.  The first option doesn't work so I always click on download.  I assume the downloads are piling up so I wanted to delete them but I can't find them stored anywhere on my iPad. Where are they?

  • Unhandled exception was thrown by the sandboxed code wrapper's Execute method in the partial trust app domain

    Hi All,
      I have created a custom web part in VS 2008 for Share point server 2010 with DevExpress v12.2.17, and deployed as Sandboxed solution. when i add that web parts in web part zone i am getting the error as "Web Part Error:
    Unhandled exception was thrown by the sandboxed code wrapper's Execute method in the partial trust app domain: An unexpected error has occurred. ".
    If there is any way to get detailed error either log file or event viewer.
    Kindly advice to find the cause of the problem.
    Thanks,
    Selvakumar.S

    Hello,
    Are you impersonating your code? Have you tried to debug your code by attaching SPUCHostService.exe? if not please do so.
    You also need to check ULS log for more information about this error. Here is one ref link if this could help
    http://sohilmakwana.wordpress.com/2013/11/29/sandbox-error-unhandled-exception-was-thrown-by-the-sandboxed-code-wrappers-execute-method-in-the-partial-trust-app-domain/
    Hemendra:Yesterday is just a memory,Tomorrow we may never see
    Please remember to mark the replies as answers if they help and unmark them if they provide no help

  • The principle of the step reponse

    PCI7344
    1,The track of 1000 counts in "absolute position" mode are so different from the step reponse of 1000 counts in step.
    Can anyone tell me the difference between them, or there is no difference.
    If i want to get a good PID to reach a good position accuracy  in absolut position mode ,how many counts in step is suitable?
    2.I am using the servo tune to tune the PID. When i chang the Kd,Aff, Vff, there seem to be no more obvious change in step reponse ,
    I doubt the Kd,Aff and Vff don't take effect at all,right?Or the numbers are not suitable?
    Thanks for your help!

    Hi
    Please find the link below
    [Test Run|Add a test run to a specific report]
    Hope this helps you
    Regards,
    Rajani

  • Freeze the partial depreciation for asset

    Dear Expert,
    We have special scenario for asset depreciation. In China, the assetu2019s retirement need waiting for government inspection & approval. The requester to do the physical scrap when we got the approval, and then the asset accountant will retire this asset in SAP system.
    In the period of waiting of approval, the asset needs to stop the depreciation. We can shutdown or change depky 0000 for depreciation freeze, but these methods will freeze all NBV which mean the entire asset has not depreciation, but we think freeze the partial NBV and the remainder NBV still has depreciation in future.
    For example,
    Asset A - 01/31/2009     GAV  $100   AD $50     NBV $50
    This asset needs the partial scrap for $20 on 02/01/2009.
    Asset A - 02/01/2009     GAV $100   AD $50     NBV $30 * 20$ will be froze.
    Just need to your help,  What method can carry out this result in SAP?
    Thanks.

    Hi,
    You can use the cutoff value key and assign it in the depreciation key and in turn assign it in asset master,in your case the cutofff key would be defined as 20%. (if you want you can create a new dep key and assign it to the specific asset)
    doing this will make sure that after NBV of the asset is $20, depreciation will not be carried out.
    hope this clarifies youe query.
    Regards,
    J

  • I saturated all the available iPad (3rd. generation) screen space (home screens or desktop space) with apps, and the apps that got bumped out of the last screen, mysteriously disappeared? Where are those missing quick lauch app icons?

    Running my 3rd generation iPad on iOS 7.0.4, I saturated all the available iPad screen space (which would be the 15 home screens or desktop worth of space) with apps, and the apps that got bumped out of the last screen space mysteriously disappeared. Where are those missing quick lauch app icons now? The apps are still installed and can be searched/accessed through the finder, but they no longer have a user friendly access. How can I solve this problem?

    Christopher Doryan wrote:
    Hi Hexonxonx, thanks for trying to help, but next time please read the entire discussion, in oder to better comprehend what is being asked. The reason being is that your answer added nothing to what had already been mentioned.
    Like I said, I was aware it was possible to access the apps through the finder, but the question revolved around how to recover the quick launch app icons for certain vanished apps.
    Wow, kind of a snotty response to someone who was taking their own time to offer help.  Whether you thought it was helpful or not, didn't deserve such an unkind retort.  Maybe when you realize we all just users here trying to help others like you, who have issues and we don't get anything in return for the countless hours some people here spend offering that assistance, you'll maybe be a little less quick to be critical.
    Just sayin.......
    Oh and Meg offered the right answer.  Put your Apps in Folders, which will create extra space for the apps which have disappeared.

  • The Esata | MyBook Mystery

    Hello everyone.
    So....it is apparent that there is some sort of issue with esata cards that use Silicon Image's chipset. I have tried three different types of cards, all with the same issue.
    Here's the weird part....this issue doesn't seem to affect my esata Western Digital My Book. However, I cannot use any of my RAID esata setups without getting a kernel panic or the system freezing on me in some way.
    WHY IS THIS??? No idea. Why would a cheap Western Digital My Book work flawlessly but a nice expensive G-Tech RAID crashes every time????
    The mystery continues. I would love to hear from someone with an answer to all this. It really annoys me that Cal digit and Sonnet mention the cards I've used as being compatible with Snow Leopard after all this trouble.
    Hope to get an answer soon before all my drives die.

    Here's my confusion.
    Links to these companies that claim their cards work:
    Under FASTA-2e's driver section on this page:
    http://www.caldigit.com/support.asp
    This mentions "Snow Leopard Tested" (look for note "7")
    http://www.sonnettech.com/product/temposatae2p.html
    I am aware of Apple's incompatible list but hopefully we can all work together to make this world a better place and fix this issue.
    Thanks all!

Maybe you are looking for