E51 GPRS for email problem

Hi all,
I recently own E51 and tried to configure mailbox with POP3 settings, everything works perfect with wifi.
But with help of GPRS from service provider I'm unable to download email, it says Incoming mail server not found.!
Same problem persists with other applications like Fring etc.
I need help on why is this happens with GPRS.? Service provider says it should work with the settings provided..
Regards,
Aditya

Hi
Sorry I should of said I use pop3, so in my previous post, that stands for POP3. Go return your cheap phone and get an iPhone, use the excuse that you were mis-sold sold theres no cost to yourself.
You'll love the iPhone. Had mine since 9th November and it is actually the best thing since sliced bread!
Not only is it a gimmicky gadget for all gadget lovers but its functional as well.
Couple of examples:
My girlfriend wanted to go to a Denby store last night. We were near Leeds, so whilst in the car, she did a quick search and found out there was a retail outlet off Junction 32 in Castleford (Im not from leeds so wouldn't of found it. She also went on the Junction 32 site and found that it was open til 5..... all over GPRS....... all full web pages.
When Im at work I check personal email on iPhone.
I'm getting married and was visiting friends at the weekend (hence I was in leeds) so whilst in the pub on the Sunday, I wanted to show them the venue I've booked. Turned on iPhone, edge was ready and waiting, full site in full display on iphone within about 10 seconds so not too slow.
Had a word document emailed to me containing some terms and conditions. Clicked attachment and could browse the word document whilst away.
Walking to the corner shop used to be boring, not with iPod always in my pocket.
I always forget where I'm supposed to be from one week to the next, not anymore, calendar sorts it out for me.
I could go on and on and on, but you get the picture....

Similar Messages

Submit button for email problem

I want to add a submit button that the user can click on and that the button opens up an Outlook email message w/ the form attached. I know how to add a submit button with "mailto" [email protected] but that's not what I want. I want the button to simply open a new outlook message window. The form will be used across the organization and want the ability for it to be emailed to various people whenever needed.
Can anyone assist??

Thank you! That worked!
Ruby Rodriguez | HR Business Specialist | Human Resources
| Cape Fear Valley Health | 1638 Owen Drive | Fayetteville, NC 28304
| ( 910.615.4352 | Fax 910.615.7907 | * [email protected] <mailto:[email protected]>
<http://www.linkedin.com/company/cape-fear-valley-health-system> <https://www.facebook.com/capefearvalley

Is anyone else having email problems such as apps exiting in the middle of an email? It may be a wireless issue. I use First Class for work and yahoo email for personal. I will be in the middle of typing a long email and the app just quits, all data lost.

Is anyone else having email problems such as apps exiting in the middle of an email? It may be a wireless issue. I use First Class for work and yahoo email for personal. I will be in the middle of typing a long email and the app just quits, all data lost.

Have you tried restarting or resetting your iPad?
Restart: Press On/Off button until the Slide to Power Off slider appears, select Slide to Power Off and, after the iPad shuts down, then press the On/Off button until the Apple logo appears.
Reset: Press the Home and On/Off buttons at the same time and hold them until the Apple logo appears (about 10 seconds). Ignore the "Slide to power off"

I bought my iphone 5 in Houston Texas May 15 2013 IMEI Nr. 013428009645399.The problem is that in the Greece the country which I live the 4G is not working.If you have any solution for this problem pls. let me know.My email is philcoueth@yahoo.gr Thank yo

I bought my iphone 5 in Houston on May 15 2013.
IMEI 013428009645399.The problem I have is that in the country
which I live GREECE the 4G is
not working.Please if you have any solution for this
problem let me know.My email is [email protected]
Thanking you in advance
Philip Couridis

iPhones purchased in the US are NOT guaranteed to work with 4G bands outside of North America.
For what crazy reason did you purchase an iPhone in the US if you live in Greece? If your phone needs servicing, it will have to be brought back to the US. You cannot get that phone serviced in Greece.

Attach for email review problem

I am using Acrobat 9.0 Standard to sent documents for email review. However none of the recipients ever see the yellow banner with the "Send Comments" button or the "Comments & Markup" toolbar.
I am using Outlook with Microsoft Exchange Server and mail is defaulted to Plain Text.
I would appreciate any suggestiong on how to correct this problem.
Thank you in advance to any and all who reply.

I am having a similar problem. The users of Reader who receive my pdf documents cannot use the comment and markup tools. I have Acrobat Standard 9.1.2 installed in Windows. There are various versions of Reader installed through the company, but none earlier than version 7. The autogenerated text that prints with the emails generated reads as follows:
You are invited to review the document: Intake Fax.pdf. You can use Adobe Acrobat 6 or later to review this document.
Click the attachment to open it in Acrobat, and make your comments using Comment & Markup tools. When you are finished, click "Send Comments" to return your comments to the author.
I had read that creating the document in Word could be the source of the problem, but I have tried creating the document from Notepad and had the same issues. I currently have a pdf created in Acrobat out to a collegue but I don't have the response from him yet.
I also read something about the pdf being saved in one of the ISO formats that prohibits the file from being changed in any way. This doesn't appear to be the case either since my settings state that pdf's created are "regular".
I don't have a clue why this is not working and I would think that Adobe would be on top of this since the ability to share and review documents was one of the primary selling features. I'm sure I am not the only one who thinks this way.

Problem in follow up for email in exchange2010

Hi,
We have also to support exchange 2010 for flagging. Was able to support flagging for exchange2013 with answer from this link
http://social.msdn.microsoft.com/Forums/office/en-US/0b3faf0d-4457-405d-bc71-0594575885c8/action?threadDisplayName=facing-problem-in-setting-follow-up-for-email
Apart from links above i had been looking into this link
http://social.technet.microsoft.com/Forums/en-US/f949a75d-070b-455e-82b6-01f1674de111/ews-adding-due-date-to-flagged-message?forum=exchangesvrdevelopment
and sending this request XML for exchange2010
<soap:Envelope xmlns:soap="http://schemas.xmlsoap.org/soap/envelope/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:t="http://schemas.microsoft.com/exchange/services/2006/types" xmlns="http://schemas.microsoft.com/exchange/services/2006/messages">
<soap:Header>
<t:RequestServerVersion Version="Exchange2010_SP1"></t:RequestServerVersion>
</soap:Header>
<soap:Body>
<UpdateItem ConflictResolution="AutoResolve" MessageDisposition="SaveOnly">
<ItemChanges>
<t:ItemChange>
<t:ItemId Id="AAMkADU4YWJjNjhkLTE4OWYtNGJmNy1iOTIzLTRlNGVjNDFmYTBhNABGAAAAAAA+3eJWXGVyTLYpBc0G1f+2BwCWtgWpIkfLQ4VqkhNzipUqAAAAP4L0AACWtgWpIkfLQ4VqkhNzipUqAAAASbfZAAA=" ChangeKey="CQAAABYAAACWtgWpIkfLQ4VqkhNzipUqAAAATyTc"></t:ItemId>
<t:Updates>
<t:SetItemField>
<t:Message>
<t:ReminderIsSet>false</t:ReminderIsSet>
<t:ReminderMinutesBeforeStart>0</t:ReminderMinutesBeforeStart>
<t:ExtendedProperty>
<ExtendedFieldURI PropertyTag="0x1090" PropertyName="FlagStatus" PropertyId="0" PropertyType="Integer"></ExtendedFieldURI>
<Values></Values>
</t:ExtendedProperty>
<t:IsRead>false</t:IsRead>
</t:Message>
</t:SetItemField>
</t:Updates>
</t:ItemChange>
</ItemChanges>
</UpdateItem>
</soap:Body>
</soap:Envelope>
But facing some issues with which is surely incorrect. Can someone let me know what should be a proper request xml format for flag status in exchange2010. And also fi possible some other related links which could be helpful in understanding the xml format to
be send.
Thanks,
Madhur Rawat

You'll need to set those properties I pointed to in the Protocol document
http://msdn.microsoft.com/en-us/library/ee201994(v=exchg.80).aspx so something like
<soap:Body>
<m:UpdateItem MessageDisposition="SaveOnly" ConflictResolution="AlwaysOverwrite">
<m:ItemChanges>
<t:ItemChange>
<t:ItemId Id="AAMk=" ChangeKey="CQAAABYAAAB8PtJwmH78TaGH6N/gd2ToAACzxPm0" />
<t:Updates>
<t:SetItemField>
<t:ExtendedFieldURI DistinguishedPropertySetId="Common" PropertyId="34096" PropertyType="String" />
<t:Message>
<t:ExtendedProperty>
<t:ExtendedFieldURI DistinguishedPropertySetId="Common" PropertyId="34096" PropertyType="String" />
<t:Value>Follow up</t:Value>
</t:ExtendedProperty>
</t:Message>
</t:SetItemField>
<t:SetItemField>
<t:ExtendedFieldURI PropertyTag="4245" PropertyType="Integer" />
<t:Message>
<t:ExtendedProperty>
<t:ExtendedFieldURI PropertyTag="4245" PropertyType="Integer" />
<t:Value>6</t:Value>
</t:ExtendedProperty>
</t:Message>
</t:SetItemField>
<t:SetItemField>
<t:ExtendedFieldURI PropertyTag="4240" PropertyType="Integer" />
<t:Message>
<t:ExtendedProperty>
<t:ExtendedFieldURI PropertyTag="4240" PropertyType="Integer" />
<t:Value>2</t:Value>
</t:ExtendedProperty>
</t:Message>
</t:SetItemField>
<t:SetItemField>
<t:ExtendedFieldURI PropertyTag="3627" PropertyType="Integer" />
<t:Message>
<t:ExtendedProperty>
<t:ExtendedFieldURI PropertyTag="3627" PropertyType="Integer" />
<t:Value>1</t:Value>
</t:ExtendedProperty>
</t:Message>
</t:SetItemField>
<t:SetItemField>
<t:ExtendedFieldURI DistinguishedPropertySetId="Common" PropertyId="34208" PropertyType="SystemTime" />
<t:Message>
<t:ExtendedProperty>
<t:ExtendedFieldURI DistinguishedPropertySetId="Common" PropertyId="34208" PropertyType="SystemTime" />
<t:Value>2014-10-09T16:18:16.984+11:00</t:Value>
</t:ExtendedProperty>
</t:Message>
</t:SetItemField>
<t:SetItemField>
<t:ExtendedFieldURI DistinguishedPropertySetId="Task" PropertyId="33028" PropertyType="SystemTime" />
<t:Message>
<t:ExtendedProperty>
<t:ExtendedFieldURI DistinguishedPropertySetId="Task" PropertyId="33028" PropertyType="SystemTime" />
<t:Value>2014-10-08T16:18:16.984+11:00</t:Value>
</t:ExtendedProperty>
</t:Message>
</t:SetItemField>
<t:SetItemField>
<t:ExtendedFieldURI DistinguishedPropertySetId="Task" PropertyId="33029" PropertyType="SystemTime" />
<t:Message>
<t:ExtendedProperty>
<t:ExtendedFieldURI DistinguishedPropertySetId="Task" PropertyId="33029" PropertyType="SystemTime" />
<t:Value>2014-10-09T16:18:16.984+11:00</t:Value>
</t:ExtendedProperty>
</t:Message>
</t:SetItemField>
<t:SetItemField>
<t:ExtendedFieldURI DistinguishedPropertySetId="Common" PropertyId="34070" PropertyType="SystemTime" />
<t:Message>
<t:ExtendedProperty>
<t:ExtendedFieldURI DistinguishedPropertySetId="Common" PropertyId="34070" PropertyType="SystemTime" />
<t:Value>2014-10-07T13:00:00.000Z</t:Value>
</t:ExtendedProperty>
</t:Message>
</t:SetItemField>
<t:SetItemField>
<t:ExtendedFieldURI DistinguishedPropertySetId="Common" PropertyId="34071" PropertyType="SystemTime" />
<t:Message>
<t:ExtendedProperty>
<t:ExtendedFieldURI DistinguishedPropertySetId="Common" PropertyId="34071" PropertyType="SystemTime" />
<t:Value>2014-10-07T13:00:00.000Z</t:Value>
</t:ExtendedProperty>
</t:Message>
</t:SetItemField>
</t:Updates>
</t:ItemChange>
</m:ItemChanges>
</m:UpdateItem>
</soap:Body>
Cheers
Glen

8.0.2 - problem 1 - unable to scroll screen when the keyboard is present. Huge problem for emails and other cloud based providers that allow for data entry. We need a fix ASAP!

8.0.2 - problem 1 - unable to scroll screen down or up when the keyboard is present. When typing text, I am unable to see the text I am writing due to this problem. Huge problem for emails and other cloud based providers that allow for data text entry. While the keyboard is present, I am unable to scroll down to see the text, the screen automatically scrolls back up to the top of the screen. We need a fix ASAP!

Have you tried resetting your iPad? You will not lose any data. Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.

Email problems for 4

Anyone having problems with I4 email saying"cannot get mail" the user name or password for email address is incorrect.. I've shut
it down turned off wifi ....Don't know what else to do because it was working fine yesterday.

Hi Sugarmama33,
Oh my! Thanks for this info! I can certainly understand your frustration with your email not working. I know how important email can be to daily functions, so lets get this fixed. What type of email account is this, pop or exchange? Are you able to access this email account from a computer web browser with same username and password? Try uninstalling the email account http://bit.ly/LIhuL4, then re-add the email account. Lastly you can try a soft reset to the device http://bit.ly/tXe7I4. Hope this helps!
Thanks,
Pamelaf_vzw
Tweet us @vzwsupport

Outlook 2010 Problem selecting ISP for email default when sending receiving OK

I am using Outlook 2010 for email with an ISP. Recently installed Outlook 2013 on a new laptop using the same broadband wireless router connection. The email file is showing as my ISP but in the Data files window although my ISP file appears I
cannot select it as the default it remains on the Data file with my ISP below it.
When I send an email it goes straight to the sent box but is undelivered.
I can receive email in the Inbox from other computers.
In the Email account details only my ISP appears with below it a statement that new messages will be delivered to the ISP account ending .pst
How can I make my ISP the default data file.
On my laptop Outlook 2013 has the default as my ISP account ending .ost
Help please

Hi,
Based on the description, you have a pst data file in Outlook 2010 and an ost data file in Outlook 2013, I think you are probably using an IMAP account?
Please note, in Outlook 2010, IMAP data files can't be set as default, because IMAP doesn't support the special folders - calendar, contacts, tasks. Outlook needs a default data file to store these information.
This has been changed in Outlook 2013, we can now set the IMAP data files as default.
If you have further questions, feel free to post back.
Regards,
Melon Chen
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs.

E63 strange email problem

Just got my E63 yesterday and I immediately set up 3 email accounts on the phone. Gmail, hotmail, yahoo.
I have no problem accessing them via GPRS or WiFi, except with my yahoo account. When I access it using my WiFi at home, it couldn't connect. It keeps asking me for username and password and if I want to save it in mailbox settings. It then tries to connect again, after 3-5 seconds, it asks for username and password again and again. If I access the email using GPRS, it works fine.
What is the problem here? Anyone experienced this before?

This is the exact sequence..Nokia email setup. ..
1. Selected : Set up email (from my App Shortcuts)
2. Chose 'Yes' for "Allow application to use network to send or receive data?"
3. Testing Network connections.
4. Welcome to E-mail setup....
5. Chose Start
6. Asks for email-address:   [email protected]
7. Getting email settings
8. Asks for Password:
9. Getting email settings
10. Chose "Ok" for Mailbox set up in Messaging folder?
11. I choose "yahoo.com" folder in my Messaging folder.
12. It asks "Connect to mailbox?"
13. Connecting to mailbox yahoo.com...
14 Asks for user-id & password
15. Asks " Save password to mailbox settings?"
16. NOW.. .13 to 15 goes in a loop!!!
17. Now I choose email settings from options..
18. Connections > Incoming e-mail
              User name :     I enter my yahoo-id (without @yahoo.com)
              Password  :
              Incoming mail server :   (default value: imap.n.mail.yahoo.com)
                                                I enter: plus.pop.mail.yahoo.com
              Access point in use:   Vodafone Mobile Connect
              Mailbox name        :    yahoo.com
              Mailbox type          :    IMAP4
              Security (ports)      :    (default value : off, Other options: StartTLS, SSL/TLS)
                                                I choose: SSL/TLS
              Port                      :    (default value: default)
                                               I choose: user-defined (has a default value of 993) &
                                               enter : 995
> Outgoing e-mail:
              My e-mail address:     [email protected]
              Username                  myemail
              Password:
              Outgoing mail server:  (default: smtp.mobile.mail.yahoo.com)
                                               I enter: plus.smtp.mobile.mail.yahoo.com
              Access point           : vodafone mobile connect
              Security (ports)        : (default: Off)
                                               I choose: SSL/TLS
              Port                        : (default 587)
                                               I enter: 465
Come back... and select "Connect"
Connecting to mailbox "yahoo.com"
I get an ERROR.... Email: Connection to IMAP4 server has been dropped !!
Where is the problem?? Are you able to see? What am I doing wrong?
Thanks in advance...

Does anyone know of a work around for this problem? : iphone 5 will not work on Chryslers uconnect. I found out that they are working on it but have no ETA.   However, they will not help you if your vehicle is older thatn 2008.

Do not get an iphone 5 if you want to use it with a Chrysler product. The Chrysler Uconnect system might pair with your phone but the uconnect system will usually abend and become unusable after a few telephone conversations. I have been to the dealer twice. They have reset the uconnect system twice and I find it works for about 2 to 3 phone calls then it abends and uconnect becomes useless. They had me call Chrysler at 1-800-247-9753. I was told that the iphone five is not compatable at this time with any chrysler uconnect phone through the dash system, even the new vehicles. He had me get on this web site: www.uconnectphone.com as a place to monitor as when it would be compatable. They told me that Samsung seems to be working harder to make it compatible than apple is and they had no idea when it would begin to work. In effect Chrysler was telling me dump the iphone and get a Samsung if you want it to work in a Chrysler. Also, the site would only give you information for Chrysler that were 2008 or newer, they gave the following number to call if your vehicle was older.    I called that number and they told me that Chrysler and Uconnect had no plans at all to make the iphone 5 work, in the future, on any Chrysler older than 2008. So.......If you have a Chrysler or Dodge that is older than 2008 you will NEVER be able to use an iphone5 on the uconnect through the dash system.   Do not buy an iphone if you have an older vehicle. It will never be supported for the $1,000 you paid for this uconnect system on your car. My car is a 2005 Town and Country. I asked both Chrysler and uconnect if their was some sort of work around so I could use my phone. They both told me their was not and that they had no plans to resolve this situation for my vehicle. This means that I need to either get rid of my $42,000 vehicle with low milage or get rid of my Iphone 5. Niether are really good options.
I was also givne the following places to send formal complaints, even though I was told that neither Chrysler, Dodge or Apple were going to do anything to correct my problem:
for email:   [email protected]   or Mail: Chrysler customer Assistance P.O. Box 218004, Auburn Hills, Michigan 48321
If anyone hears of a work around to be able to use an Iphone 5 in a Chrysler or Dodge product, please let me know.

This response is a little late as I just read about your problem. I have a 2012 Dodge Charger and a 2012 Chrysler Town and Country and both worked flawlessly with the iPhone 5s my wife and I had. However, we just upgraded to the iPhone 6 and Uconnect will receive calls but you cannot answer them. You can callout successfully, however. the annoyance being the inability to answer incoming calls in the HandsFree mode.

Email problems with BB synched via BES. No email notifications and can't send replies.

This isn't a question, but more of a public service announcement for those like myself that manage to screw up their email settings. I recently had problems with my email in that I would not get audible or visual notifications of new email and I couldn't send replies although I could forward and create new emails. The problem is that I am using Desktop Manager on two PCs and only one is configured to access my corporate email account, the one that is redirected to the BB. The default settings of my Desktop Manager installation was to synchronize the device date and time automatically when connected to the PC. Connecting my BB to my home machine would cause the email problems. I had to wipe and reactivate to fix my problems.
So, if you want to use the BB on two PCs and one is not configured for the email account going to the phone... disable the auto synchronization option BEFORE connecting the device to that machine and launching Desktop Manager. It would also be nice if the Desktop Manager installer had an option to install on a PC that is used for backup/recovery and application loading only. The installer had two options IIRC and your choice was that the BB is used with BES or with a personal email account.

Internally, your invites are processed by the server.
If an outside sends a new invite to you, the server doesn't know about it until you add the event to your calendar app.
You'll find settings in Mail and Calendar apps (depending on client OS) to automatically add invites to the Calendar.
So to sum it up.
Internal users, processed in real-time directly by the server
External invites, must be processed by the client app, and depending on OS/Settings, could require manually adding or acknowleding. Also.. in 10.7/10.8 you will see an inbox tray in the Calendar app, your invites may show up there (and you'll need to click to ack)
Hope that helps.

Unable to add account to Outlook 2010 for email address under custom domain

I am unable to add a new account in Outlook 2010 for an email account set up under a custom domain.
Can anyone explain why login credentials that work for outlook.com (successful access to email inbox) return an authentication failure (401 error) when used to test connectivity via https://testconnectivity.microsoft.com?
Details:
I set up a custom domain at https://domains.live.com and did the following DNS configuration steps at my web hosting company following instructions from domains.live.com:
Created custom MX record
Created CNAME record [name:] autodiscover.jrergonomics.com [value:] autodiscover.outlook.com.
I created email addresses at domains.live.com > jrergonomics.com > Member accounts and tested by successfully logging in to outlook.com.
When I try to add either account to Outlook 2010, I get a popup box with this information:
Title: "Windows Security"
Connecting to [email protected]
[[email protected]]
[ ] Remember my credentials
[ OK ] [ Cancel
The credentials that I use successfully to log in to outlook.com don't work here; I get the popup box 3-4 times and then the Outlook 2010 Add New Account dialog displays an error:
"An encrypted connection to your mail server is not available. Click Next to attempt using an unencrypted connection."
Clicking Next results in an error message:
"Problem Connecting to Server"
I have tried verifying the connectivity using https://testconnectivity.microsoft.com:
<?xml version="1.0" encoding="utf-8"?>
<testresult status="FatalError" errorid="734044ef-11c2-4e30-9ee6-450d49e9d92c" contentUrl="" testdescription="The Microsoft Connectivity Analyzer is attempting to test Autodiscover for [email protected]." resultdescription="Testing Autodiscover failed." additionaldetails="" elapsedMilliseconds="40517">
<children>
<testresult status="FatalError" errorid="734044ef-11c2-4e30-9ee6-450d49e9d92c" contentUrl="" testdescription="Attempting each method of contacting the Autodiscover service." resultdescription="The Autodiscover service couldn't be contacted successfully by any method." additionaldetails="" elapsedMilliseconds="40517">
<children>
<testresult status="Error" errorid="734044ef-11c2-4e30-9ee6-450d49e9d92c" contentUrl="" testdescription="Attempting to test potential Autodiscover URL https://jrergonomics.com/AutoDiscover/AutoDiscover.xml" resultdescription="Testing of this potential Autodiscover URL failed." additionaldetails="" elapsedMilliseconds="21181">
<children>
<testresult status="Success" errorid="00000000-0000-0000-0000-000000000000" contentUrl="" testdescription="Attempting to resolve the host name jrergonomics.com in DNS." resultdescription="The host name resolved successfully." additionaldetails="IP addresses returned: 64.90.49.188" elapsedMilliseconds="146">
<children />
</testresult>
<testresult status="Error" errorid="c716c7b4-a473-4ca4-8859-fc9c5bb12ad1" contentUrl="http://go.microsoft.com/fwlink/p/?LinkId=133210&v=ExRCA.1&id=B2E81FE1-5A94-4d07-9D58-AD483268A72A" testdescription="Testing TCP port 443 on host jrergonomics.com to ensure it's listening and open." resultdescription="The specified port is either blocked, not listening, or not producing the expected response." additionaldetails="A network error occurred while communicating with the remote host.
" elapsedMilliseconds="21035">
<children />
</testresult>
</children>
</testresult>
<testresult status="Error" errorid="734044ef-11c2-4e30-9ee6-450d49e9d92c" contentUrl="" testdescription="Attempting to test potential Autodiscover URL https://autodiscover.jrergonomics.com/AutoDiscover/AutoDiscover.xml" resultdescription="Testing of this potential Autodiscover URL failed." additionaldetails="" elapsedMilliseconds="4982">
<children>
<testresult status="Success" errorid="00000000-0000-0000-0000-000000000000" contentUrl="" testdescription="Attempting to resolve the host name autodiscover.jrergonomics.com in DNS." resultdescription="The host name resolved successfully." additionaldetails="IP addresses returned: 157.56.244.217, 157.56.234.137, 157.56.236.89, 157.56.240.137" elapsedMilliseconds="376">
<children />
</testresult>
<testresult status="Error" errorid="c716c7b4-a473-4ca4-8859-fc9c5bb12ad1" contentUrl="http://go.microsoft.com/fwlink/p/?LinkId=133210&v=ExRCA.1&id=B2E81FE1-5A94-4d07-9D58-AD483268A72A" testdescription="Testing TCP port 443 on host autodiscover.jrergonomics.com to ensure it's listening and open." resultdescription="The specified port is either blocked, not listening, or not producing the expected response." additionaldetails="A network error occurred while communicating with the remote host.
" elapsedMilliseconds="4605">
<children />
</testresult>
</children>
</testresult>
<testresult status="FatalError" errorid="734044ef-11c2-4e30-9ee6-450d49e9d92c" contentUrl="" testdescription="Attempting to contact the Autodiscover service using the HTTP redirect method." resultdescription="The attempt to contact Autodiscover using the HTTP Redirect method failed." additionaldetails="" elapsedMilliseconds="14148">
<children>
<testresult status="Success" errorid="00000000-0000-0000-0000-000000000000" contentUrl="" testdescription="Attempting to resolve the host name autodiscover.jrergonomics.com in DNS." resultdescription="The host name resolved successfully." additionaldetails="IP addresses returned: 157.56.244.217, 157.56.234.137, 157.56.236.89, 157.56.240.137" elapsedMilliseconds="21">
<children />
</testresult>
<testresult status="Success" errorid="00000000-0000-0000-0000-000000000000" contentUrl="" testdescription="Testing TCP port 80 on host autodiscover.jrergonomics.com to ensure it's listening and open." resultdescription="The port was opened successfully." additionaldetails="" elapsedMilliseconds="59">
<children />
</testresult>
<testresult status="Success" errorid="00000000-0000-0000-0000-000000000000" contentUrl="" testdescription="The Microsoft Connectivity Analyzer is checking the host autodiscover.jrergonomics.com for an HTTP redirect to the Autodiscover service." resultdescription="The redirect (HTTP 301/302) response was received successfully." additionaldetails="Redirect URL: https://autodiscover-s.outlook.com/Autodiscover/Autodiscover.xml

HTTP Response Headers:
Connection: close
Pragma: no-cache
Cache-Control: no-cache
Location: https://autodiscover-s.outlook.com/Autodiscover/Autodiscover.xml
" elapsedMilliseconds="45">
<children />
</testresult>
<testresult status="FatalError" errorid="734044ef-11c2-4e30-9ee6-450d49e9d92c" contentUrl="" testdescription="Attempting to test potential Autodiscover URL https://autodiscover-s.outlook.com/Autodiscover/Autodiscover.xml" resultdescription="Testing of this potential Autodiscover URL failed." additionaldetails="" elapsedMilliseconds="14021">
<children>
<testresult status="Success" errorid="00000000-0000-0000-0000-000000000000" contentUrl="" testdescription="Attempting to resolve the host name autodiscover-s.outlook.com in DNS." resultdescription="The host name resolved successfully." additionaldetails="IP addresses returned: 157.56.241.102, 157.56.232.166, 157.56.245.70, 157.56.245.166, 157.56.236.214, 157.56.236.6" elapsedMilliseconds="191">
<children />
</testresult>
<testresult status="Success" errorid="00000000-0000-0000-0000-000000000000" contentUrl="" testdescription="Testing TCP port 443 on host autodiscover-s.outlook.com to ensure it's listening and open." resultdescription="The port was opened successfully." additionaldetails="" elapsedMilliseconds="84">
<children />
</testresult>
<testresult status="SuccessWithWarnings" errorid="734044ef-11c2-4e30-9ee6-450d49e9d92c" contentUrl="" testdescription="Testing the SSL certificate to make sure it's valid." resultdescription="The certificate passed all validation requirements." additionaldetails="" elapsedMilliseconds="248">
<children>
<testresult status="Success" errorid="00000000-0000-0000-0000-000000000000" contentUrl="" testdescription="The Microsoft Connectivity Analyzer is attempting to obtain the SSL certificate from remote server autodiscover-s.outlook.com on port 443." resultdescription="The Microsoft Connectivity Analyzer successfully obtained the remote SSL certificate." additionaldetails="Remote Certificate Subject: CN=outlook.com, OU=Microsoft Corporation, O=Microsoft Corporation, L=Redmond, S=WA, C=US, Issuer: CN=Microsoft IT SSL SHA2, OU=Microsoft IT, O=Microsoft Corporation, L=Redmond, S=Washington, C=US." elapsedMilliseconds="163">
<children />
</testresult>
<testresult status="Success" errorid="00000000-0000-0000-0000-000000000000" contentUrl="" testdescription="Validating the certificate name." resultdescription="The certificate name was validated successfully." additionaldetails="Host name autodiscover-s.outlook.com was found in the Certificate Subject Alternative Name entry." elapsedMilliseconds="1">
<children />
</testresult>
<testresult status="SuccessWithWarnings" errorid="734044ef-11c2-4e30-9ee6-450d49e9d92c" contentUrl="" testdescription="Certificate trust is being validated." resultdescription="The certificate is trusted and all certificates are present in the chain." additionaldetails="">
<children>
<testresult status="Success" errorid="00000000-0000-0000-0000-000000000000" contentUrl="" testdescription="The Microsoft Connectivity Analyzer is attempting to build certificate chains for certificate CN=outlook.com, OU=Microsoft Corporation, O=Microsoft Corporation, L=Redmond, S=WA, C=US." resultdescription="One or more certificate chains were constructed successfully." additionaldetails="A total of 1 chains were built. The highest quality chain ends in root certificate CN=Baltimore CyberTrust Root, OU=CyberTrust, O=Baltimore, C=IE." elapsedMilliseconds="34">
<children />
</testresult>
<testresult status="Warning" errorid="1339c33a-8f21-427b-a323-4cee1a13f517" contentUrl="" testdescription="Analyzing the certificate chains for compatibility problems with versions of Windows." resultdescription="Potential compatibility problems were identified with some versions of Windows." additionaldetails="The Microsoft Connectivity Analyzer can only validate the certificate chain using the Root Certificate Update functionality from Windows Update. Your certificate may not be trusted on Windows if the "Update Root Certificates" feature isn't enabled." elapsedMilliseconds="4">
<children />
</testresult>
</children>
</testresult>
<testresult status="Success" errorid="00000000-0000-0000-0000-000000000000" contentUrl="" testdescription="Testing the certificate date to confirm the certificate is valid." resultdescription="Date validation passed. The certificate hasn't expired." additionaldetails="The certificate is valid. NotBefore = 2/18/2014 11:41:01 PM, NotAfter = 2/18/2016 11:41:01 PM" elapsedMilliseconds="0">
<children />
</testresult>
</children>
</testresult>
<testresult status="Success" errorid="00000000-0000-0000-0000-000000000000" contentUrl="" testdescription="Checking the IIS configuration for client certificate authentication." resultdescription="Client certificate authentication wasn't detected." additionaldetails="Accept/Require Client Certificates isn't configured." elapsedMilliseconds="804">
<children />
</testresult>
<testresult status="FatalError" errorid="734044ef-11c2-4e30-9ee6-450d49e9d92c" contentUrl="" testdescription="Attempting to send an Autodiscover POST request to potential Autodiscover URLs." resultdescription="Autodiscover settings weren't obtained when the Autodiscover POST request was sent." additionaldetails="" elapsedMilliseconds="12692">
<children>
<testresult status="FatalError" errorid="6c458392-3a8c-4bc2-942e-7ab533744106" contentUrl="" testdescription="The Microsoft Connectivity Analyzer is attempting to retrieve an XML Autodiscover response from URL https://autodiscover-s.outlook.com/Autodiscover/Autodiscover.xml for user [email protected]." resultdescription="The Microsoft Connectivity Analyzer failed to obtain an Autodiscover XML response." additionaldetails="An HTTP 401 Unauthorized response was received from the remote Unknown server. This is usually the result of an incorrect username or password. If you are attempting to log onto an Office 365 service, ensure you are using your full User Principal Name (UPN).
Headers received:
RequestId: 842d50d9-3e33-4627-8804-98fa0b02070c
X-DiagInfo: CH1PRD0910CA013
Content-Length: 0
Cache-Control: private
Date: Mon, 31 Mar 2014 04:57:26 GMT
Server: Microsoft-IIS/7.5
WWW-Authenticate: Basic Realm=""
X-AspNet-Version: 2.0.50727
X-Powered-By: ASP.NET


HTTP Response Headers:
RequestId: 842d50d9-3e33-4627-8804-98fa0b02070c
X-DiagInfo: CH1PRD0910CA013
Content-Length: 0
Cache-Control: private
Date: Mon, 31 Mar 2014 04:57:26 GMT
Server: Microsoft-IIS/7.5
WWW-Authenticate: Basic Realm=""
X-AspNet-Version: 2.0.50727
X-Powered-By: ASP.NET
" elapsedMilliseconds="12691">
<children />
</testresult>
</children>
</testresult>
</children>
</testresult>
</children>
</testresult>
</children>
</testresult>
</children>
</testresult>

Hi,
Since this is an Exchange forum and your issue is related to domain.live.com, I recommend you contact with domain.live.com support to get quicker and more professional help：<cite class="_Vc">https://domains.live.com/support/
</cite>
Thanks for your understanding in advance.
Best regards,
Angela Shi
TechNet Community Support

Droid Mini notifications for email and text not working

I am having a problem with notification sounds not working for email and text messages with my Droid Mini. I took my original phone to the Verizon shop. They did a factory reset. Sound worked for two days. Went back to Verizon and they reset it again. But they did tell me if it happened again to call Verizon and they would send me a new phone. Well it happened again. Got my new phone just last week. Well yesterday and today the sound notifications for text messages and email is not working on the new phone. Last night I powered the phone off and back on and all was working well until this morning.
This is very upsetting as I really do like this phone. Would like to know what is going on with it. Have checked all the volumes and they are all up.
Is there a fix for this.
Thank you.
Barbara
Edited to start new discussion and private info removed as required by the Verizon Wireless Terms of Service
Message was edited by: Admin Moderator

For Gmail it is: open Gmail > menu > settings > your gmail address > notifications check box is unchecked.
There are some additional notification options for labels too.

Why yahoo/gmail retrieval and facebook app so so slow when in WIFI. But using the internet to check for emails and facebook is fast using the same WIFI connection??

Why yahoo/gmail retrieval and facebook app so so slow when in WIFI. But using the internet to check for emails and facebook is fast using the same WIFI connection??

Hi SandyS_VZW,
Yes tried resetting the wifi connection and problem still persist.
Here it is...to make it clear. Connected thru the same wifi at home...
-> emails (yahoo/gmail) and facebook WEBSITES are working fine and fast when using/accessing thru a browser (chrome/samsung browser) - no problem with this.
-> emails (yahoo/gmail) and facebook APP is soooooo sloooww (thru the App). Slow I mean comparing it to using their browser/websites... news feeds/emails refreshing so quickly but not when using the APP installed in Samsung Galaxy Note 4. Slow like - It will take around 5-10minutes just to get your emails and news feed refreshed.
THIS HAPPENS ONLY WHEN CONNECTED THRU A WIFI which has a speed of 10-20mb. It is not happening when connected to the network data/plan.
My wife has the same Samsung Galaxy Note 4 (coming from different provider at&t) - same setup (emails, fb app), same wifi connection, but she's not experiencing anything like it.
Not sure why, I dont want to believe that while connected to a WIFI, Verizon is restricting anything and ******* me off to make me switch to my data plan connection everytime - which is Unfair!
Was there a known issue similar about this case?
thanks,

E51 GPRS for email problem

Similar Messages

Maybe you are looking for