E51 muting car kit in silent mode upon receiving S...

Hi,
I've recently changed my 6230i to an E51 and have a new problem when using it with the CK-7W car kit connected via bluetooth. I have no sounds associated for receiving an SMS but it keeps muting the car radio for the action - just for a second but it's really annoying. It works ok for calls but I can not stop it from muting the radio for something that should not make a sound. It used to work great with 6230i. Any ideas?

Just a shot in the dark. Is your phone setup with Vibrating Alert set to on? Maybe the act of vibrating is causing it to dim the audio?
E71-2 Grey Steel
type: RM-357 code: 0569371 FW: 410.21.010
08-02-2010 Nokia E71-2 (236.06)

Similar Messages

Bluetooth and car kit

Hi, I have aproblem with the iPhone Bluetooth. The car systesn is able to recognize the iPhone and viceversa, then the car system asks to dial a passkey both on the car (easy) and on the iPhone: here I have the problemn sicne I don't know what to do, since no keyboard is available on the iPhone part regarding bkettooth: just if it is active and if it is able to find a device. So at he end nothing happens and the abilition of the is always "failed". What can I do?
Thanks a lot
MAC 3

Use the iPhone to 'find' and set up the car kit rather than the other way around (using your car to find and set up the iPhone). Go to settings, then general, then bluetooth - the phone will search for and [hopefully] find our car kit (you'll need to read your car kits manual and set your car kit in discoverable mode), then touch the car kit and the iPhone's 'keyboard' will appear asking for your car kit's pass code. Key that in and presto... done...

Silent mode with Parrot bluetooth car kit

After installing update 2.1 my iPhone / Parrot car kit doesn't work ok.
After severall calls working ok, the silent sign is shown unexpected in the parrot display after taking the phone. (silent mode means no microphone / speaker).

have a look at this...
http://www.parrot.com/forums/english/viewtopic.php?id=6076

E51 Contacts transfer to car kit via Bluetooth

If you have an E51 and have problems with transfer of contacts or call lists to a car kit via Bluetooth, please read this post:
/discussions/board/message?board.id=connectivity&thread.id=21660
Hope it helps.
Bill

You must have all your contacts on the simcard. Try copying all the contacts on to the simcard and then see what happens.

E51&Voice commands&Ford Car Kit

Hello everyone,
I just added navigation to my E51. As soon as I enter the car it connects to the inbuilt bluetooth car kit of my 2006 Ford Focus. If I start the navigation, I can't hear any voice commands. If I switch the radio and consequently the bluetooth kit off, I hear them through the phone speaker. I suppose, that they are supposed to be broadcasted through the bluetooth connection which would be great, but it doesn't work. Is there any possibility to change the output device or to support the bluetooth set of the Ford?
Best regards
Karsten

have the same problem with my N95 and supertooth have to go in and physically disconnect my bluetooth in tools when i leave the car even if I turn the supertooth off. otherwise cannot send or receive calls. ok when you remember.

Falcon with nokia car kit not muting radio?

Just got a 2007 XR6 falcon with a nokia car kit already fitted. The cable plugs in to my phone and when done the radio flashes up "media" but when a call is received or made the radio doesn't do anything. Could this be because the model of phone I have, it's a cheap 6131 or just something I'm missing?
Cheers
Craig

Check that the phone software is up to date. It sounds like the phone is holding the audio channel open and not realeasing the mute quickly enough.
*#0000# will display what version you are running.
You can update software on pcsuite but remember to back up the phone contents first.
www.nokia.com/pcsuite

Silent mode for lumia 710

Is there a silent mode in the lumia 710 that cuts out ALL sounds including gaming and all notifications.
I can see by the instruction manual where to change this, and it also says silent, but there is only ring and viabrate, or viabrate only. This does not turn off all sounds including gaming and notifications. I unticked all boxes under sounds, however I still get live update sounds. There should be a silent mode but I cannot see it.
Has anyone else found where this is.

Hi mark8188909,
When you switch silent mode on, all ringtones and alert tones are muted. Use this when you are, for example, at the cinema or in a meeting.
Press a volume key to see the volume status bar, then select ring . Silent mode is switched on. If you have set your phone to vibrate, vibrate mode is switched on instead of silent mode.
Set your phone to vibrate
Select > and ringtones+sounds, and switch Vibrate to On .
Hope this helps and let us know how you get on.
Regards,
haZey
If you find this post helpful, a click upon the white star at bottom would always be appreciated.
If it also solves your problem, clicking ACCEPT AS SOLUTION below it will benefit other users!

Nokia 610 car kit

Please help! I have the above car kit and I think it's great, everyone is impressed who gets in my car. However I would like to change my phone as it's getting very old and I've had it since it came out, so a few years!! It's a 6230. I'm desperate to take advantage of some of these new contract deals with free gifts etc but can't as I've been told the kit can't be used with any other phone. Is this true? Can someone please give me the good news that another Nokia phone can work with it so I can upgrade! Or can I buy some new software for the kit instead of having to buy a whole new system?

Hello,
I had same problem with E51 and Carphone Kit Nokia 610. After long research i got it done.
1. Step download and install Nokia 610 Contact Download Application for Nokia S60 3rd edition devices On your E51. It is available on the Nokia site:
http://europe.nokia.com/A4160018
2. Step Connect the Car phone 610 with your E51
important!!! if you tried this before with your phone delete all saved Bluetooth connections in your carphone and in your E51.
switch on the bluetooth in your phone and start the Contact Download Application. It is important that it is running during the connection procedure between carphone and E51!
I hope I don't have to tell you that the phone must be visible and the remote SIM mode has to be enabled.
Switch on the carphone choose external Sim Card and search for Bluetooth devices. When your Phone got found try to connect. You will be asked for a access code, wait some seconds and in the display of the carphone will appear a 16 digit code. Accept it and wait until your E51 is responding. Type in in your E51 the 16 digits code and the carphone and E51 get connected.
3. Copy the contacts:
after the connection is established the Carphone askes for copying the contacts from the phone. Confirm and the Copy procedure is starting automaticly.
When i was trying it, it was not working the first time. But the next time when i was starting my Carphone the connection was done automaticly and the Copying of the contacts also worked fine.
Ciao Tim

Car Kit Pairing with Peugeot 407

Hi all,
I have an iPhone 3G with iOS4 and a bluetooth car kit (manufacturer's) in my Peugeot 407SW.
Problem : My iphone pairs with the kit, it receives calls and I can make calls. However, when I go to the Telephone Directory and the Calls List, every entry is named as 'battchg' - so I have to scrutinise the numbers to see who I am calling - which is pointless.
So, wither all of my friends and family need to change their names to battchg or - can someone help please ???!!!
Thanks
o10

4.1 does not fix everything as my Peugeot 407 does not ring when I have an incoming call, it's silent and I have to watch the screen on dash which defeats the object. Also it just says incoming private number, please sort this out apple. Thanks.

Car Kit problem with 6680

Can anybody please assist me!
I have a CK-7W car kit which I have been successfully using until recently with a 6230i. Last week my phone was upgraded to a 6680 and was supplied through work with the CR-27 cradle. However, when this is connected to the existing cradle connector, I get the message 'enhancement not supported' on the phone.
Any suggestions?Message Edited by phill_a on 15-Jan-2006
09:48 AM

Ok.
I have now tried the CK-7W with my wife's Nokia 6100, just using the pop-port cable and it has similar problems;
1. It thinks it is connected to a headset, not a car kit.
2. The radio stays on "phone" mode.
I didn't actually try making a call on it, but it seems odd that the problems are similar with another phone.
With my 6680 and the CK-7W, the phone works fine via bluetooth, but again, thinks it is connected to a headset, not a car kit.
When I connect through the pop-port cradle (CR-27) the radio stays on "phone" mode and the phone thinks it is connected to a headset. If I try to make a call, the sound is terrible, with loads of echo and feedback.
Also, while I can "see" my HDW-2, I am unable to actually pair with it.
What do I do?
I have bought the genuine Nokia accessories, and this phone seems unable to work with them. Plus the CK-7W seem unable to connect to either my 6680 or 6100 via pop-port.
What can be the problem?
I am really annoyed with what is supposed to be a high quality product.
Perhaps someone will respond?
6300 - E65 - CK-7W - CK-15W - LD-3W - BH-200 - TT6

E66 with Audi SAP Bluetooth Car Kit

Hi
I've been using my E66 with my Audi A6 SAP car kit for two weeks now. Unlike my E51 which works fine the E66 connects ok then after about 1 or 2 minutes disconnects. After another 30 seconds or so it reconnects to the car kit. It seems that if I make or receive a call during the first minute then the E66 will remain connected. If I don't it will enter the disconnect / connect cycle.
Is anybody else having the same problem?
Cheers
James

The generic problem you have with Car Kits made for Car Manufacturers and phones is that both companies are very inclined not to talk to one another, and when you try and find out why its failing each will blame each other.
The problem may quite probably be resolved by a software update, either in the phone or the car.
You can check the Nokia site to see if an update is available for your phone.
The Audi update will have to be done by your local Audi Centre, which can be tricky to do to say the least, because they tend to stall, and give a self-righteous attitude towards the customer trying to tell them how it is.
I'd check with a few local Audi Centres.
The list of compatible handsets, is always out of date, and you get phones like the 6230 etc they dont really pay much attention to it.
I found that my S3 kit which is not SAP, would disconnect when my phone left the range of my WLAN, sometimes if I restarted the phone before I got it, it wouldn't disconnect at all.
I don't get it at all with my E71.
Shunts...
I will mostly be communicating with a Nokia E72 Zodium Black
Nokia E72-1 with Vr 051.018.207.04 Software
If this post helped... Add some kudos!!

Car kit automatic A2DP connection

I'm not entirely sure if this is a problem on my phone, or with the car kit, but I figured if I post on both ends, someone might know the answer.
With my N95 and N97, as soon as I turn on my car (equipped with Nokia CK-100), I automatically get connected to BT HFP and A2DP profiles. The car kit will tell me, "Phone connected." A second later, "Player connected." With the N8, the car kit will only connect to just the phone automatically. For the player to connect while the car is on, I have to open up the music player and play a song, which will then force N8 to make the A2DP connection. So when that happens, you hear a 1.5 second message saying, "Player connected" followed by music that is already 2 to 3 seconds into the song. I thought it was perhaps the Car Kit getting full with the list of paired devices (memory is for 8 pairings), but clearing the list doesn't help. I thought it was the Car Kit firmware, so I upgraded it to 4.401, no luck. Then when I paired my old N97 and N95, both HFP and A2DP connections were made automatically when I boot up my car as expected! But not the N8.
Problem with the Car Kit, or problem with S^3?
John @ Chicago // 5160 (1999.07.20) > 7160 (2001.06.09) > 6340i (2003.04.26) > 6620 (2004.08.24) > 7610b (2005.05.08) > N91 (2006.06.07) > N95-3 (2007.09.28) > N95-3 #2 (2007.12.05) > E51 (2008.03.10) > N97 (2009.06.11) > N97 #2 (2009.09.11-warranty replacement) > N97 #3 (2009.12.10-warranty replacement) > N8 (2010.12.02) > N8 #2 (2010.12.11-retailer replacement) > 808 (2012.12.10) > X2 Dual Sim (2015.01.19-for motorcycle offline maps use only) %gt; 808 #2 (2015.01.26-manufacturer replacement)

The N8 on PR1 is still not a good excuse for the many bugs that it has. It's just unimaginable that something that worked solidly with S60v3 and S60v5 and suddenly with the improved Symbian OS a mature and functional feature suddenly has a bug? I just don't understand how that could've made it into the N8. Is it the OS? Or is it the BT chipset? In either case, quality control got missed.
Thanks, though, for letting me know that I'm not the only one to experience this. I'll stop trying to fix this as this is a problem outside of my control.
John @ Chicago // 5160 (1999.07.20) > 7160 (2001.06.09) > 6340i (2003.04.26) > 6620 (2004.08.24) > 7610b (2005.05.08) > N91 (2006.06.07) > N95-3 (2007.09.28) > N95-3 #2 (2007.12.05) > E51 (2008.03.10) > N97 (2009.06.11) > N97 #2 (2009.09.11-warranty replacement) > N97 #3 (2009.12.10-warranty replacement) > N8 (2010.12.02) > N8 #2 (2010.12.11-retailer replacement) > 808 (2012.12.10) > X2 Dual Sim (2015.01.19-for motorcycle offline maps use only) %gt; 808 #2 (2015.01.26-manufacturer replacement)

C03-01 doesn't connect to car kit

Hi all,
i have this problem: my C03-01 cannot find my Audi TT car kit by bluetooth..it finds easily other kits (like on Nissan cars), but not on my new car... any suggestion?
Thanks

@voorst
Your C3-01 has apparently been tested as compatible with your TT upon this microsite:http://microsites.audi.com/ngw_assets/mobile_db/en_UK/index.html
Happy to have helped forum with a Support Ratio = 42.5

Alarm sounds even in silent mode!

Hi,
I have a 3GS. I'm a bit hard of hearing, and I have an alarm set for evening hours. Yesterday I was in a movie theater. I was careful to flip the switch to silent mode, but the alarm went off anyway. LOUD, because I don't hear too well.
I silenced it as fast as I could, and the snooze button was the first button I could get to. Then put in the password to make sure it was reset. I put the phone back in my pocket, and the darn thing went off again! The button I pushed was snooze, and evidently you can't silence it after you pressed snooze?
In the manual, I found out that the alarm pays no attention to the silent switch. What nonsense is this? You give us a silent switch and then have a permanent feature of the phone totally ignore it? It was like a bomb went off in that theater, and the second time around was 10 times worse.
Somebody please tell me there's a way around this. I browsed some of the other alarm clocks, but they don't seem to care about this problem.
I need the loud alarm so I can hear it, and I need the silent switch even more.
Thanks.

Ken Roberts wrote:
Somebody please tell me there's a way around this.
I'm sorry, but the only way around this is to turn the alarm off when you don't need it, like in a theater, in church, etc.
Some like an alarm that can't be silenced, some don't. You can send Apple your preference here: http://www.apple.com/feedback/iphone.html

N95 not disconnecting from 616 car kit correctly

We have 2 cars that have 616's and users with N95's. Both kits fitted professionally to a BMW and a VW, and phone as kits are about a year old. Everything has been working great, but over the last month they have both developed the same problem, where the N95 still thinks it's connected to the kit, and needs restarted. They can then go back into the car again and it connects fine. The firmware on the phones have been upgraded, but the problem still happens.
Does anyone have any ideas, is it the phones or the car kits that are having the problem?
They are connecting to the kit in sim access mode.

Thanks for your help.
When I wrote my post there was no special N95 compatible version of the contacts downloader.
Meanwhile there is a compatible version of the contacts downloader and with it I am able to download my contacts from the N95 to the Nokia 610.
You can find the N95 compatible version in the download section of the Nokia 610.
click me
Sincerely,
CandidMessage Edited by candid on 09-Dec-200710:26 PM

E51 muting car kit in silent mode upon receiving S...

Similar Messages

Maybe you are looking for