E55 - Speed camera warnings ?

My E55 has been up dated with the latest software and I downloaded the latest UK map yesterday, but there are no speed camera warnings.
Is this a bug or are they not available for the E55?
Safety Spot Warner is ON.
Just noticed the Safety Spot Warner folder is empty. What should be in there and how do I get it?

Also, should speed cam signs be visible on the map at all times or only on planed routes, as I have never seen them.

Similar Messages

Nokia strips out speed camera warnings from the Ma...

On both my 808s I have just realised the audio warnings have stopped totally.
There was a recent maps update. I did an update check and it said that the whole lot (3GB in my case) needed updating, so I did it. That was probably a bad idea, because it looks like the camera warning function has been deleted.
A google digs out this
http://www.allaboutsymbian.com/flow/item/18004_European_speed_cams_deliberate.php
The fix does work! I can see the cameras as POIs in the Drive app.
The Maps app shows none of them, which is probably as intended as it doesn't offer speed cameras in the list of POIs to enable/disable, either.
This means that Nokia will not be updating the camera database, ever again. That's a pity - that was a huge part of the functionality of my phone, and I am sure many others (that drive a car a lot) will agree.
Presumably Nokia will be doing the same crude hack on their WP phones. What they don't realise is that the Maps functionality is a huge selling point for Nokia, without which a Nokia phone has very few attractions to the average user, over say an Iphone.

Just stick to the speed limit.
If everybody had done this there would never have been any speed cameras in the first place.
History: Always Nokia since 1994 including Nokia 2140, 7110e, 6150, 6210, 6310i, 6230i, N82
Current: Nokia N8 (Anna - I have no intention of going to Belle) - and delighted with it!

Nokia drive speed cameras

I first used Nokia Drive in the UK and there it supported speed cameras.
Now when I'm in Sweden there is no support for speed cameras.
Will Nokia drive support speed cameras in Sweden?

Hi Snubben,
Thank you for your first post and welcome to the forums!
The reason why you don't get speed camera alerts in some countries is because some do legislate against it and also it isn't a current feature in the Swedish region although you do receive warnings about speed limits even when not navigating.
The information provided for "Traffic and Safety" availability is:
Traffic info & Safety cameras: Austria, Belgium, Finland, Italy, Netherlands, Norway, Spain, United Kingdom
Traffic info only: Denmark, Germany, Luxembourg, Switzerland, Sweden
Safety cameras only: Andorra, Northern Ireland, Poland, Romania,
We currently don't have any information whether this is feature is planned to be added or not.
Also I have attached a link to the Swedish version of Drive with a user guide and current supported features:
http://www.nokia.com/se-sv/support/produkt/nokia-drive-2-0/
Regards
Raoul_Duke
If you find this post helpful, a click upon the white star at bottom would always be appreciated.
If it also solves your problem, clicking ACCEPT AS SOLUTION below it will benefit other users!

Speed Cameras

Trying to find a solution for my 5800x
after killing my phone trying to update firmware with win7, I took it to repair centre, they fixed me all up including firmwear version 40.xxx.xx.xx blah blah
got home, installed ovi suite to laptop with xp, conected up, downloaded and installed ovi 3.3, got to map downloads, downloaded various maps in UK map, out and about in car and have to say I'm quite pleased, only issue so far is it does not show speed camera location or warnings, while searching through the forum for answers I see some users have this installed, so where am I going wrong???
thanks for any help
Johnnie

Hi Craiga,
You can do following things :
Make sure you have installed the newest firmware and OVI maps. Also download the Map Data for your country.
2. Check your area where where you are navigating. Because safety camera is not available in all countries. Here is the list I got from other threads:
Traffic info & Safety cameras: Austria, Belgium, Finland, France, Italy, Netherlands, Norway, Spain, United Kingdom
Traffic info only: Denmark, Germany, Luxembourg, Switzerland
Safety cameras only: Andorra, Northern Ireland, Poland, Romania, Sweden
3. Go to Setting -> Navigation -> Safety Spot Warner : ON
4. Notice that Safety Spot Warner only show up WHILE in navigation mode. User could not see it on normal tracking mode.
Hopefully help.

HERE drive+ Speed cameras

Hello,
I have a Nokia Lumia 620 with HERE Drive+ installed on it. It is a very good navigation app.
Too bad that speed cameras are not mentioned.
Does anybody know how it is possible that speed cameras are mentioned when driving?
I read in another topic that in Belgium speed cameras are included in the app, but I can't see them.
Thanks!

Nokia deliberatly removed the safety camera locations from all european maps after France and a few smaller countries made navigation devices with camera warnings illigal
With the old symbian handsets you can get these back easily enough by digging into the file system and repalcing the file
WP, your stuck and as suggested need to find another app in the store

Hi Guys does anyone know of a way i can get cyclops speed camera alert to work through bluetooth incar hands free kit , i used to be able to connect it via an app called drivesafely but this app is no longer available in apple store ????????????

Hi Guys does anyone know of a way i can get cyclops speed camera alert to work through bluetooth incar hands free kit , i used to be able to connect it via an app called drivesafely but this app is no longer available in apple store ????????????

I think the easiest way to do this is to have the EyeTV app running in one user account and sent via HDMI to the TV, and use a separate user account for Screen Sharing. Both logins can be active at the same time and with Lion you can connect via screen sharing to which ever login you need.
With regards to the Mac video resolution changing, when it is not the current input on your AV receiver. This is 'normal', if the Mac sees no signal it drops down the a lower level. What you need is to buy a HDMI Detective Plus which tricks the Mac in to always seeing a signal and hence it will not drop down the resolution. See http://www.gefen.com/kvm/dproduct.jsp?prod_id=8005
The Mac mini does have an IR receiver. This can be used with the EyeTV app, iTunes, and similar. Yes I believe EyeTV would run for prolonged periods quite happily, it is has been around for a long time and had most of the rough edges polished off. However one issue you will have to deal with is that it does not automatically update its program guide data. For this you might have to write or modify an AppleScript. Elgato support or their user forums will be a lot of help.
You can set EyeTV to convert recordings to an iTunes (Apple TV) compatible format and then delete them from EyeTV.
The HDMI Detective should solve your handshaking problems.

High speed cameras

not quite FCP related..well, sorta. anyhow, does anyone have any suggestions as far as high-speed cameras (500-1000fps) for outdoor, action-sport usage? i've checked into a few rental houses, and there's a decent variety, but i haven't used one before and don't know if there's a specific one that would work better than another. this would be used on snow (for snowboarding) but in warm temps (40-70 degrees F. You can snowboard/ski on Mt Hood in oregon in the summer, if you're wondering).
also, is there anything i need to be concerned with when importing and editing this footage in FCP?
thanks for any help!

i think, gardner, you're on the bleeding edge here. i can honestly say i've never in my several years here seen this come up.
my experience with super mo cams are reconfigured studio cams shooting 90fps into discrete r,g,b channels and then fed into an evs for even slower motion. feisty beasts i must say! also, i've yet to see a hd super mo. whenever i work an hd show and there's a mo, it's upconverted to hd from sd.
i do not have any sort of experience with handheld super mo's like the phantoms from vision research. http://www.visiblesolutions.com/?sector=htm/app&page=products&prodcatid=1
that being said, if you're working in standard definition, at the end of the day, it has to be ntsc 29.97 fps video, plain and simple. just because something was shot at 1000fps, it's still ntsc 29.97 fps video.
good luck and i find this interesting so post back with your findings and please post any video you shoot.
zeb

Digital start trigger and high speed camera

Is there any particular option or way available in LabVIEW to initiate the data acquisition and high speed camera using a digital start trigger? If yes, shall I create a task for high speed camera and then synchronize it with the other tasks?
Kind Regards,

Hi Helen19411,
The way to trigger data acquisition in LabVIEW is to use the 'DAQmx Start Trigger VI'. To set this up I recommend taking a look at this example:
http://www.ni.com/example/25282/en/
Without any information about the high speed camera you are using, I can't give much advice. If the device is viewable in MAX then you may be able to create a task, and so long as you synchronise both channels in your code, the digital trigger should activate both events.
Kind Regards,
TomS
Applications Engineer
National Instruments

N95-8GB speed camera and traffic info ??

Does anyone know if you can add on speed camera and traffic information onto the navigation software pre-loaded for use on the N95 8GB ??

I asked the same question a week or so ago here with no reply
I emailed nokia for an answer and had the following reply
"Thank you for emailing Nokia Care.
In response to your enquiry, Nokia N95 8GB does not support the speed camera software.
Kind regards,
Bhanu
Nokia Care"
shame as its the only thing holding me back from making the full purchase

N70 tomtom speed camera files

Hi all, a bit of advice please.
I have managed to install tomtom onto my n70 and all works well. I have downloaded and installed various POI's all work well. Problem is, I cannot get the POIS's for speedcams across the UK to work?
This could be due to my friend proving me with the files, but he has a n73 phone? Are the versions different? Voice and other POI's seem to work ok?
If I do require a different version of the speed cam poi's, can anyone advise on where I can download these for free from.
Cheers

You obviously have TT5 if you have TT working on your N70. POI files will work with any version of TT.
The POI files come in the form of two matched files. An ov2 file and a bmp file with the same front name eg speedcam.ov2 and speedcam.bmp. The files must be placed in the map folder eg UK and IE Plus Major Roads WE.
Then from the main menu of TT go into Change Preferences/Manage POIs and Enable the POI required eg Speed Cams or whatever name the files have. You can then set them to warn you when near them.
Lastly you can get the files if you haven't got them already from Pocket GPS World website http://www.pocketgpsworld.com/modules.php?name=Forums
Hope this helps

Speed Cameras - Not working UK

How do i get speed cams to work in OVI maps? i have the latest version on and have selected "safety cams" in options but when driving home last night it didn't show me where the speed cams were as i was approaching them, am i missing some thing.
Is it just for static cams, used to have Garmin on my nokia and that used to do the fixed and the mobile cams etc etc.
Any tips please?

Hi
I am having the same problem with my Nokia E72.
Don't seem to be able to get an answer anywhere, I have been looking for the past week with no joy.
Come on where are all the good guys that know how to use this tech? Please show this none tecchy grandmother how to be up to date with the speed cameras on the Ovi maps. I would like to get rid of the sat nav in my car and just use my phone. It's great at getting me around but I would really like to have the cameras working on it.
Also does anyone else know when these maps were updated? As there is a new bypass at the end of my road but it's not on the map installed on my phone v3.03 but it's on the tom tom 8.4 map I have in my tom tom one.
Thank you in advance.
Gillian57

Replace MiDAS with labview in a high speed camera

Has anyone out there used MiDAS for high speed camera aquisition? The camera came with MiDAS. However the camera can be operated through labview which I'd prefer for better data aquistion. Does anyone have a program for this? Or know somewhere to look? Or help me get started to build my own program.
The camera will be connected to a NI USB 6251
Thanks!
Hova

Let's consolidate these threads into one.
Chris Bolin
LabVIEW Partner Program, CLA

Using the Cyclops speed camera app, the sound on my iPhone 4s switches off after a few minutes. Any ideas?

when using the Cyclops speed camera app the sound on my iPhone 4s switches off after a short while. If I close the app and reopen it, there's still no sound. If I restar the phone and open Cyclops I get sound "welcome to Cyclops" or whatever the greeting is. Has anyone got any ideas?

I've taken several Express devices apart in the past to experiment with them. The internal components warm up quite a bit in the first 10-15 seconds. They continue to heat up after this. It takes 3-4 minutes or so before the heat transfers to the outer case for dissipation.
Nothing is certain, but I'm 95% sure that this is your issue. But, trying to find a microscopic break in a circuit board trace is, as I mentioned, a real longshot. If you have the time and have done things like this before, it might be worth a shot.
I guess the bottom line is that even if this is not the issue, the device will still need to be replaced since Apple does not offer repairs. There are no software or firmware fixes for somthing like this.

Can I show speed camera on my navigator?I am itali...

I have a big problem....i can't to show speed camera on my n82 during driving...is it possible?I have to download other software?help me pls.
manu thanks

hi Ferrari90,
You can do following things :
Make sure you have installed the newest firmware and OVI maps. Also download the Map Data for your country.
2. Check your area where where you are navigating. Because safety camera is not available in all countries. Here is the list I got from other threads:
Traffic info & Safety cameras: Austria, Belgium, Finland, France, Italy, Netherlands, Norway, Spain, United Kingdom
Traffic info only: Denmark, Germany, Luxembourg, Switzerland
Safety cameras only: Andorra, Northern Ireland, Poland, Romania, Sweden
3. Go to Setting -> Navigation -> Safety Spot Warner : ON
4. Notice that Safety Spot Warner only show up WHILE in navigation mode. User could not see it on normal tracking mode.
Hopefully help.

Timeout errors when using high speed camera.

Hi all.
I'm currently trying to capture images using a Mikrotron EoSens MC1363 camera at high frame rates >500fps. The issue arises when the region of interest (ROI) is decreased in the microtron software (of which screenshots are attached). The ROI must be dropped in order to increase the fps. When MAX is opened and configured to match the camera settings, and grab is initiated, the timeout error occurs. I've attached screenshots of the mikrotron software, max settings, the error and PC used. The OS is windows 7 64 bit. We use the camera config file for the mono version of the camera which i've been informed will cross over to satisfy the colour version we use. Any questions feel free to ask. Thanks.
Attachments:
errors.docx ‏3016 KB
997-EoSens 3CL-MC1362-Manual.pdf ‏1209 KB

Hi Dom.
As you said the maximum frame rate with the ROI set to 1280 x 1024 is 505fps but according to the general information for the camera series:
The Mikrotron EoSens camera series features extremely sensitive high-speed
CMOS sensors available in monochrome or in colour with a resolution of 1280 x
1024 pixels and capture rates of 110 or 500 frames per second. Depending on
the model the image data is transferred in 8 or 10 bits via either CameraLink
(Base, Medium or Full) or Gigabit Ethernet.The region of interest (ROI) can be
freely selected, and the cameras can achieve even higher capture rates up to
120,000 fps when the ROI is reduced
Therefore it was my thought that by reducing the width of the ROI increased frame rates may be reached. Realistically we're looking for as high frame rates as possible so that the camera has capability to pass between projects. Currently the moving object enters and leaves the ROI within a 4 frame window, so frame rates of up to 1000fps would generate more data. Naturally, a point will come where the data cannot be physically written as fast as it is generated (>600MBps). Therefore it would be useful to get a handle onto why the error occurs as well as methods to fix it. Hopefully the problem is being discussed between NI and Mikrotron and we may have some answers in the near future.

E55 - Speed camera warnings ?

Similar Messages

Maybe you are looking for