How to fill a new single field in a Infocube with historical data

Hello Everybody,
We have an SD infocube with historical data since 1997.
Some of the infoobjects (fields) of the infocube were empty during all this time.
Now we require to fill a single field of the infocube with historical data from R/3.
We were thinking that an option could be to upload data from the PSA in order to fill only the required field (infoobject).
Is it possible? is there any problem doing an upload from the PSA requests directly to the infocube.
Some people of our team are thinking that the data may be duplicated... are they right?
Which other solutions can we adopt to solve this issue?
We will appreciate all your valuable help.
Thanks in advance.
Regards.
Julio Cordero.

Remodeling in BI 7:
/people/mallikarjuna.reddy7/blog/2007/02/06/remodeling-in-nw-bi-2004s
http://www.bridgeport.edu/sed/projects/cs597/Fall_2003/vijaykse/step_by_step.htm
Hope it helps..

Similar Messages

Populated the new field with historic data

HI,
I have a data for 2 years now I am enhancing the data source how can I populated the new field with historic data.Is it by
1)deleting all the data in BW side and the doing an init then setting up a regular delta
2)running a repair full request with selection condition.
or is there any other option available? which is the best scenario to load these historic data?
Regards,
Ravi

Hi,
I think your datasource is already in production, and you want to data only from today onwards for enhanced fields, i.e. historical data is not required for enhanced fields..
1.Fix ECC down time for 20 to 30 munities
2. Keep all objects on Qty system in ECC and BW.
3.Run Delta laods in BW for 2 to 3 times.So with this step you can clear SMQ1 and RSA7. Check the entries in RSA7, if it is ZERO then it is fine.
4. Move DS from ECC Qty to ECC PROD .
5. Replicate in BW.
6. Move all BW objects from BW Qty to BW Prod.
7. Delete Init load in InfoPackage level (Not in ODS/CUbe).
8.Load Init without DataTransfer.
9.Then Run Delta.
10. Next day on wards deltas will come as usual.
If you need Historical data also.
1.Delete data in Cube.
2.Fix Down Time and load Init then Delta.
Check
SAP Note 328181 - Changes to extraction structures inCustomizing Cockpit
Thanks
Reddy

How can I concatenate a currency field (eg: 12.25) with numeric values

Hi,
I ma working in ECC6.0.
How can I concatenate a currency field (eg: 12.25) with numeric and character values into a variable.
I want to concatenate 12.25 with "+" and "0".
Regard,
Divya

Hi,
I ma working in ECC6.0.
How can I concatenate a currency field (eg: 12.25) with numeric and character values into a variable.
I want to concatenate 12.25 with "+" and "0".
Regard,
Divya
==================================
data: l_string type string.
move l_curr_field to l_string.
condense l_string no-gaps. "if needed
concatenate l_string '+' '0' into l_string.
now your l_string will have all the values.

How can I have a single cursor using elements 9 with Windows 7?

Currently the cursor on my screen is 3 small boxes in place of the single arrow. I am using Photoshop Elements 9 With Windows 7. I have loaded the patch files currently in the Adobe system without any success.

Thank-you that solved the issue.
In a message dated 4/20/2014 8:57:10 P.M. Eastern Daylight Time,
[email protected] writes:
Re: How can I have a single cursor using elements 9 with Windows 7?
created by Barbara B. (http://forums.adobe.com/people/Barbara+B.) in
Photoshop Elements - View the full discussion
(http://forums.adobe.com/message/6315096#6315096)

How to make the Profit Center Field Mandatory in Cost center Master Data

Dear All,
Please let me know how to make the Profit Center Field mandatory in Cost Center Master Data as well as my Internal Order Master Data?
Thanks in advance!
Regards,
Rajeswari Shankar.

Hi Rajeswari,
You can modify message number KS096 to "Error" via OBA5. Thus, the users would no be able to save a cost center without entering a profit center. (Depending on your release you can make KS096 modifiable by implementing note 486781.)
Concerning the internal orders (transaction KO01), you can run KOT2 and set Profit center field as required entry in "change field selection" section.
Regards,
Greta

How can I write new objects to the existing file with already written objec

Hi,
I've got a problem in my app.
Namely, my app stores data as objects written to the files. Everything is OK, when I write some data (objects of a class defined by me) to the file (by using writeObject method from ObjectOutputStream) and then I'm reading it sequencially by the corresponding readObject method (from ObjectInputStream).
Problems start when I add new objects to the already existing file (to the end of this file). Then, when I'm trying to read newly written data, I get an exception:
java.io.StreamCorruptedException
at java.io.ObjectInputStream.readObject0(Unknown Source)
at java.io.ObjectInputStream.readObject(Unknown Source)
Is there any method to avoid corrupting the stream? Maybe it is a silly problem, but I really can't cope with it! How can I write new objects to the existing file with already written objects?
If anyone of you know something about this issue, please help!
Jai

Here is a piece of sample codes. You can save the bytes read from the object by invoking save(byte[] b), and load the last inserted object by invoking load.
* Created on 2004-12-23
package com.cpic.msgbus.monitor.util.cachequeue;
import java.io.File;
import java.io.FileInputStream;
import java.io.FileOutputStream;
import java.io.IOException;
import java.io.RandomAccessFile;
* @author elgs This is a very high performance implemention of Cache.
public class StackCache implements Cache
    protected long             seed    = 0;
    protected RandomAccessFile raf;
    protected int              count;
    protected String           cacheDeviceName;
    protected Adapter          adapter;
    protected long             pointer = 0;
    protected File             f;
    public StackCache(String name) throws IOException
        cacheDeviceName = name;
        f = new File(Const.cacheHome + name);
        raf = new RandomAccessFile(f, "rw");
        if (raf.length() == 0)
            raf.writeLong(0L);
     * Whne the cache file is getting large in size and may there be fragments,
     * we should do a shrink.
    public synchronized void shrink() throws IOException
        int BUF = 8192;
        long pointer = getPointer();
        long size = pointer + 4;
        File temp = new File(Const.cacheHome + getCacheDeviceName() + ".shrink");
        FileInputStream in = new FileInputStream(f);
        FileOutputStream out = new FileOutputStream(temp);
        byte[] buf = new byte[BUF];
        long runs = size / BUF;
        int mode = (int) size % BUF;
        for (long l = 0; l < runs; ++l)
            in.read(buf);
            out.write(buf);
        in.read(buf, 0, mode);
        out.write(buf, 0, mode);
        out.flush();
        out.close();
        in.close();
        raf.close();
        f.delete();
        temp.renameTo(f);
        raf = new RandomAccessFile(f, "rw");
    private synchronized long getPointer() throws IOException
        long l = raf.getFilePointer();
        raf.seek(0);
        long pointer = raf.readLong();
        raf.seek(l);
        return pointer < 8 ? 4 : pointer;
     * (non-Javadoc)
     * @see com.cpic.msgbus.monitor.util.cachequeue.Cache#load()
    public synchronized byte[] load() throws IOException
        pointer = getPointer();
        if (pointer < 8)
            return null;
        raf.seek(pointer);
        int length = raf.readInt();
        pointer = pointer - length - 4;
        raf.seek(0);
        raf.writeLong(pointer);
        byte[] b = new byte[length];
        raf.seek(pointer + 4);
        raf.read(b);
        --count;
        return b;
     * (non-Javadoc)
     * @see com.cpic.msgbus.monitor.util.cachequeue.Cache#save(byte[])
    public synchronized void save(byte[] b) throws IOException
        pointer = getPointer();
        int length = b.length;
        pointer += 4;
        raf.seek(pointer);
        raf.write(b);
        raf.writeInt(length);
        pointer = raf.getFilePointer() - 4;
        raf.seek(0);
        raf.writeLong(pointer);
        ++count;
     * (non-Javadoc)
     * @see com.cpic.msgbus.monitor.util.cachequeue.Cache#getCachedObjectsCount()
    public synchronized int getCachedObjectsCount()
        return count;
     * (non-Javadoc)
     * @see com.cpic.msgbus.monitor.util.cachequeue.Cache#getCacheDeviceName()
    public String getCacheDeviceName()
        return cacheDeviceName;
}

How to sync wifes new iphone4 to my iphone 3g with both on my apple id?

how to sync wifes new iphone4 to my iphone 3g with both on my apple id?

I think that might not work. If you backup your wife's new phone and then try and restore the 3G from that backup I think that you will get an error message because the 3G needs to have the same iOS or higher than the 4 and the 3G can only have iOS 4.2.1 On another note it is not good to use the same ID for imessage on two phones ( if that uis what you plan on also doing) as you will get each others messages

How to Add a new Selection Field in COPA Report

Hi Gurus
I'm new on SAP COPA reporting and I don't know how to solve this problem.
I need add a new Selection-screen field (char1), not connected with any characteristic.
This is necessary becuase if the user flag this field, when teh report is running I'll replace some key-figure values using the EXIT
ZXYEXF05. I don't find any instruction how to define this simple kinfd of variable, and use it into a Report.
Thank-you in advance for your help.
Claudio

Hi
I'll try to explain better my need.
I've 10 CO-PA Key-Figures used to Split in the Cost of a material in different Cost Items.
Using the customizing I fill these key-figures using some rules.
The new requirement is use SOMETIME the same KF, by displaying different Costs overwritting the original values using the exit ZXYEXF05. But I need to know when the user wants consider the original value of KF, and when he wants overwrite these values (when I have to run teh exit). So I thought to create a new Selection-screen field (Char1), to permit to the user to pass to some report this user request. I thought to define a global variable, and add it to several reports when this feature is required.
Can you suggest a better solution ???
I could create some empty KF and fill them using teh exit, but I would prefer not expand the CO-PA structure.
Thanks for help.
Claudio

How to add a new metadata field to iPhoto where new field is calculated as age in years and month based on a specific date and the date photo was taken ? I want to calculate and display the age of my two kids on every photo.

Hi
How can I add 2 new metadata-fields to every photo in iPhoto ?
The new fields should state the age of my kids in years and months based on the date that they were born and the date that photo is taken.
Exampel:
My son is born 01.01.2010
My daughter is born 01.01.2012
Photo taken by data
Aage of son
Aage of daughter
01.07.2011
1 year 6 month
not born yet
01.01.2014
4 year 0 month
2 year 0 month
I would like to be able to search by kids age and get the info displayed when doing slideshows.
How to do this in iPhoto ?
Any alternatives to accomplish the same ?
Kind regards

It can't be done with iPhoto. There are some DAM (digital asset management) applications that can write to other IPTC fields that iPhoto can't read. One such app is Media Pro 1.
However you would have to calculate the age for each date and add it to one of the fields. There are online age calculators that can do that for you: Age Calculators
If you go thru that much trouble then use iPhoto, make the calculations and add the age to the Description field. Then you can use Smart Albums to search for 1year 6 month text.
OT

How to Fill value in Input fields before displaying ADOBE FORM

Hi to all,
Please can anyone tell me how to fill the entry in ADOBE FORM before displaying?
I have written a program to generate ADOBE FORM, but I need while displaying ADOBE FROM some input field should already be filled by value and can not be changed.
Please can anyone tell me how to do that in program?
Below is the program.
DATA: fm_name           TYPE rs38l_fnam,
        fp_docparams      TYPE sfpdocparams,
        fp_outputparams   TYPE sfpoutputparams.
Parameters: p_pdf_form_name type fname.
fp_docparams-langu   = 'E'.
fp_docparams-country = 'IN'.
fp_outputparams-preview = 'X'.
CALL FUNCTION 'FP_JOB_OPEN'
    CHANGING
      ie_outputparams = fp_outputparams
    EXCEPTIONS
      cancel          = 1
      usage_error     = 2
      system_error    = 3
      internal_error = 4.
CALL FUNCTION 'FP_FUNCTION_MODULE_NAME'
    EXPORTING
      i_name     = p_pdf_form_name
    IMPORTING
      e_funcname = fm_name.
E_INTERFACE_TYPE           = E_INTERFACE_TYPE
CALL FUNCTION fm_name
    EXPORTING
      /1bcdwb/docparams        = fp_docparams
IMPORTING
    /1BCDWB/FORMOUTPUT       = fp_outputparams
    EXCEPTIONS
      usage_error           = 1
      system_error          = 2
      internal_error           = 3.
CALL FUNCTION 'FP_JOB_CLOSE'
   IMPORTING
    E_RESULT             =
    EXCEPTIONS
      usage_error           = 1
      system_error          = 2
      internal_error        = 3
      OTHERS               = 4.
I shall be thankful to you for this.
Regards
Pavneet Rana
Edited by: pavneet rana on Jul 25, 2011 2:57 PM

Hello,
you need to provide the information via the interface, which you create for the Adobe form.
And then pass this values via the following function module inside your generation report.
CALL FUNCTION fm_name
check standard report : FP_EXAMPLE_01 as an example!

How to add a new custom field to one set of employees within one country?

Hi,
I am thinking of a scenario where a new custom field is dispayed in PA30 for IT0006
only for one set of employees in US (such as for a employee group or employee sub group).
Other employees should not have this custom field.
All employees in this scenario is for US country only.
Is this possible? Do we need ABAP for this or only IMG will do?
Any details on how to implement this etc..
Thanks for any help.

Thanks for everyone for the responses.
I really liked the decoupling infotype solution.
However, since some work has been done in the old way, I will try to describe the problem in detail.
Our ABAPer already created a new screen 0200 as a sub-screen in ZP000600 module (I am assuming it is a module pool) using PM01 and assigned to 2010 screen; an alternate screen specified in IMG for country 10 as key (instead of standard screen 2000 for IT0006).
This new screen 0200 is assigned to 2010 in PM01 transaction.
These steps displays the 0200 sub-screen with added fields to all the US employees hiring in the respective personal action.
I want to create a new scenario to suppress these additional fields for some US employees (say company code BKUS)
I placed a new entry in T588M for module pool as ZP000600 , key is 10, alternate screen as 0200 and hide all the fields
But, these additional fields are still displayed always for US employees for whom I want to hide.
Did I miss any thing?
I do not want to hard code in ABAP whom to display and who not to.
Is there a IMG way to do this so that I can change the criteria later as we go.
Thanks

How to add a new selection field in an infoset

Hi everyone,
I have a problem changing an infoset when I add an additional field. This field is added to its respective field group.
The problem is that after generate the infoset, I go to the transaction where the querys are made and the new field created has got only a checkbox in the column 'Output', while the column 'Selection' has no checkbox.
This only happens with this field, while the rest of the fields have two checkbox in column 'Output' and in column 'Selection'.
What can I do to make appear checkbox 'Selection' in order to make querys?
Thanks in advance,
Mayte

Hi again,
I have seen the threads about ad hoc querys but I'm still with the problem...
I'm going to tell you the steps I follow.. Perhaps someone is able to tell me what I'm doing wrong...
1. I go to S_PH0_48000513 transaction where I choose the infoset which I want to make queries..
2. In sq02 transaction I click right button in 'additional fields' in the field group where I want to add the field. I click create and fill long text, header, type, length and like reference...
3. Once the field is created I add the field in the 'field group' and generate the infoset
4. In S_PH0_48000513 I can see that the field has been added with no checkbox 'Selection' but only with checkbox 'Output'...
I need checkbox 'output' and I don't know why doesn't appear...
Thanks for your replies

How to add a new additional field in MIGO

Dear Sir,
As a business requirement , we are required to capture some additional information related to Material packing /sizes at the time of MIGO . This information need to be captured /input at the Item level during the MIGO .
We request sap gurus , to kindly guide as what steps need to be followed for adding a new field and also will it require a Z-table also to save the data pertaining to new added field .
Regards
B Mittal

Hi ,
Create a BADI implementation for MB_MIGO_BADI .
Create a program with the screen type sub-screen in SE80 and design the layout for the custom fields.
Declare the custom fields in a Z**TOP include.
Under the PBO method declare the program name and screen number as shown below:
gf_class_id = 'MIGO_BADI_IMPLEMENTATION_CIN'
e_cprog = <program name>
e_dynnr = <screen number>.
e_heading = <heading>
Under PAI method declare the field to u2018Xu2019.
e_force_change = 'X'.
Under the line modify method declare a flag and set to u2018Xu2019 checking for material document number by which we can set the fields to be in display mode when we open MIGO for display of material document created after doing goods receipt.
Under the POST_DOCUMENT method write the code for appending the value to Z table along with the values of the line item .For these values to be available here in this method use the memory concept u201CExport to memory idu201D in the method LINE_MODIFY.
In order to do any validations to the custom fields, go to transaction SE80 and mention the program Name created and in PROCESS ON VALUE_REQUEST create a module and provide the validations required for those custom Fields.
order to make the fields to be in display mode during the display of material document, create a module under PBO and import the flag value in the method LINE_MODIFY and if that flag = u2018Xu2019, use
LOOP AT SCREEN.
IF SCREEN-NAME = <NAME>.
SCREEN-INPUT = '0'.
MODIFY SCREEN.
ENDIF.
ENDLOOP.
Retrieve the values from the Z table matching the key field (production order number) and pass the value of the custom field on to the screen.
Thanks,
Shailaja Ainala.

How do I add new single line in a WAD input layout?

Hello ervery one
I had create a WAD ,and insert a input read query ,but I don't how to add a new line for this input read query on WAD
can every one help me
thanks very much
regards
wenlong

thanks for you reply Hymavathi Yanamadala
It is very usefull help me
but I think there have aonther requment whether there is number of new line can be set through a veriable that user write into,
that it is like use it is in Analyzer's workbook
thanks very much
regards
wenlong

How to add a new column to a existing table and add data to this column?

I have a table with about 10 millions row and I want to add a new column to this table, then fill this new column with prepared data.
How to do it ?
Thank you

Can I use insert statement to add the data to new-added column?No.
07:19:37 oracle >create table test (x number);
Table created.
Elapsed: 00:00:03.05
07:19:53 oracle >
07:19:53 oracle >
07:19:53 oracle >insert into test values (1);
1 row created.
Elapsed: 00:00:00.00
07:20:01 oracle >insert into test values (2);
1 row created.
Elapsed: 00:00:00.00
07:20:10 oracle >insert into test values (3);
1 row created.
Elapsed: 00:00:00.00
07:20:12 oracle >
07:20:13 oracle >commit;
Commit complete.
Elapsed: 00:00:00.00
07:20:14 oracle >
07:20:19 oracle >select * from test;
         X
         1
         2
         3
Elapsed: 00:00:00.00
07:20:22 oracle >
07:20:36 oracle >alter table test add (y number);
Table altered.
Elapsed: 00:00:00.05
07:20:41 oracle >
07:20:41 oracle >
07:20:41 oracle >
07:20:41 oracle >select * from test;
         X          Y
         1
         2
         3
Elapsed: 00:00:00.00
07:20:43 oracle >
07:20:44 oracle >
07:20:44 oracle >update test set y=1;
3 rows updated.
Elapsed: 00:00:00.02
07:20:52 oracle >commit;
Commit complete.
Elapsed: 00:00:00.00
07:20:56 oracle >select * from test;
         X          Y
         1          1
         2          1
         3          1
Elapsed: 00:00:00.00
07:20:58 oracle >Anand

How to fill a new single field in a Infocube with historical data

Similar Messages

Maybe you are looking for