E61: problems with automatically receiving emails
Hi.. I have had my E61 for quite a while already but am having problems with its internet connectivity. Basically everytime I attempt to connect to the mobile internet it very rarely connects on the first attemp, but normally I have to try 2-3 times for it to connect (even with full 3G reception. This means that when I set my email (IMAP) application to fetch emails every 2 hours it can't because it can't connect on the first time, so I have to manually connect to the mail application. Is there anything I can do to fix this with a firmware fix? or is it a problem with T-Mobile UK?
Thanks
It's the Yahoo servers. whether or not they are up and running have nothing to do with it. Password rejection is an ongoing problem with Yahoo. Sometimes it is caused by more then one device tryiing to access the Yahoo server with the same username and password at the same time or within minutes of one another. Yahoo by default only allows one connection for X amount of time. So if you have a smart phone with the yahoo mail setup on it and it tries to access the server and then your computer tries to access the server it will reject the request. Giving you the bad password dialog.
Switch your primary email over to Google Mail as Google does not have these restrictions and you can actually use IMAP with Google mail.
You can even forward all your yahoo mail to a google account so you don't have to go and change all your logons and contacts to use Gmail.
Similar Messages
-
Problems with send receive Email ( Adobe Interactive)
I have heard the E-Learning(Send, Receive, and Process Interactive Forms via Email in SAP NetWeaver Application Server ABAP (RIG session 4A)
) about this topic on this webpage but i still have to many problems. Can somebody give me a source code, that i know how this works. Or is there a source code anywhere in the sap?
I hope anybody can help me, Thanks!Thanks. I have written Programm, but it does not work as i want it to do. I will send an Email with attached Adobe Interactive Firm to [email protected]. I tried it with "*lo_recipient = cl_sapuser_bcs=>create( sy-uname )" at the marked(bold, fat) position. It worked but the Email was send to my SAP-Account, but i want to send to [email protected], so I tried this (see at code in bold, fat):
lo_rec TYPE adr6-smtp_addr VALUE '[email protected]'. " Empfänger Receiver
lo_recipient = cl_cam_address_bcs=>create_internet_address( lo_rec ).
But it doens`t send the email.
Can anybody help me please???
Kevin
Here my Code:
Report FP_EXAMPLE_01
Printing of documents using PDF based forms
REPORT z_example_02.
Data declaration
DATA: carr_id TYPE sbook-carrid,
customer TYPE scustom,
bookings TYPE ty_bookings,
connections TYPE ty_connections,
fm_name TYPE rs38l_fnam,
fp_docparams TYPE sfpdocparams,
fp_outputparams TYPE sfpoutputparams,
error_string TYPE string,
l_booking TYPE sbook,
t_sums TYPE TABLE OF sbook,
l_sums LIKE LINE OF t_sums,
fp_formoutput TYPE fpformoutput.
PARAMETER: p_custid TYPE scustom-id DEFAULT 38.
SELECT-OPTIONS: s_carrid FOR carr_id DEFAULT 'AA' TO 'ZZ'.
PARAMETER: p_form TYPE tdsfname DEFAULT 'FP_EXAMPLE_01'.
PARAMETER: language TYPE sfpdocparams-langu DEFAULT 'E'.
PARAMETER: country TYPE sfpdocparams-country DEFAULT 'US'.
Get data from the following tables: scustom(Flight customer)
sbook (Single flight reservation)
spfli (Flight plan)
SELECT SINGLE * FROM scustom INTO customer WHERE id = p_custid.
CHECK sy-subrc = 0.
SELECT * FROM sbook INTO TABLE bookings
WHERE customid = p_custid
AND carrid IN s_carrid
ORDER BY PRIMARY KEY.
SELECT * FROM spfli INTO TABLE connections
FOR ALL ENTRIES IN bookings
WHERE carrid = bookings-carrid
AND connid = bookings-connid
ORDER BY PRIMARY KEY.
Print data:
First get name of the generated function module
CALL FUNCTION 'FP_FUNCTION_MODULE_NAME'
EXPORTING
i_name = p_form
IMPORTING
e_funcname = fm_name.
IF sy-subrc <> 0.
MESSAGE e001(fp_example).
ENDIF.
Set output parameters and open spool job
fp_outputparams-nodialog = 'X'. " suppress printer dialog popup
fp_outputparams-getpdf = 'X'. " launch print preview
CALL FUNCTION 'FP_JOB_OPEN'
CHANGING
ie_outputparams = fp_outputparams
EXCEPTIONS
cancel = 1
usage_error = 2
system_error = 3
internal_error = 4
OTHERS = 5.
Set form language and country (->form locale)
fp_docparams-langu = language.
fp_docparams-country = country.
*fp_docparams-fillable = 'X'.
*fp_docparams-langu = 'E'. "wird jetzt automatisch gesetzt, bzw. kann dynamisch verändert werden
*fp_docparams-country = 'GB'. "wird jetzt automatisch gesetzt, bzw. kann dynamisch verändert werden
currency key dependant summing
LOOP AT bookings INTO l_booking.
l_sums-forcuram = l_booking-forcuram.
l_sums-forcurkey = l_booking-forcurkey.
COLLECT l_sums INTO t_sums.
ENDLOOP.
Now call the generated function module
CALL FUNCTION fm_name
EXPORTING
/1bcdwb/docparams = fp_docparams
customer = customer
bookings = bookings
connections = connections
t_sums = t_sums
IMPORTING
/1bcdwb/formoutput = fp_formoutput
EXCEPTIONS
usage_error = 1
system_error = 2
internal_error = 3
OTHERS = 4.
IF sy-subrc <> 0.
CALL FUNCTION 'FP_GET_LAST_ADS_ERRSTR'
IMPORTING
e_adserrstr = error_string.
IF NOT error_string IS INITIAL.
we received a detailed error description
WRITE:/ error_string.
EXIT.
ELSE.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
ENDIF.
Close spool job
CALL FUNCTION 'FP_JOB_CLOSE'
EXCEPTIONS
usage_error = 1
system_error = 2
internal_error = 3
OTHERS = 4.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
*********************Send the form*******************
*********************to the Customer*****************
*********************via Email***********************
*IF i_down = abap_true.
DATA: filename TYPE string,
path TYPE string,
fullpath TYPE string,
default_extension TYPE string VALUE 'PDF'.
Data:
lt_att_content_hex TYPE solix_tab.
*DATA: data_tab TYPE TABLE OF x255.
CALL FUNCTION 'SCMS_XSTRING_TO_BINARY'
EXPORTING
buffer = fp_formoutput-pdf
TABLES
binary_tab = lt_att_content_hex.
CLASS cl_bcs DEFINITION LOAD.
DATA:
lo_send_request TYPE REF TO cl_bcs VALUE IS INITIAL.
lo_send_request = cl_bcs=>create_persistent( ).
DATA:
lt_message_body TYPE bcsy_text VALUE IS INITIAL.
DATA: lo_document TYPE REF TO cl_document_bcs VALUE IS INITIAL.
APPEND 'Dear Vendor,' TO lt_message_body.
APPEND ' ' TO lt_message_body.
APPEND 'Please fill the attached form and send it back to us.'
TO lt_message_body.
APPEND ' ' TO lt_message_body.
APPEND 'Thank You,' TO lt_message_body.
lo_document = cl_document_bcs=>create_document(
i_type = 'RAW'
i_text = lt_message_body
i_subject = 'Vendor Payment Form' ).
DATA: lx_document_bcs TYPE REF TO cx_document_bcs VALUE IS INITIAL.
TRY.
lo_document->add_attachment(
EXPORTING
i_attachment_type = 'PDF'
i_attachment_subject = 'Vendor Payment Form'
i_att_content_hex = lt_att_content_hex ).
CATCH cx_document_bcs INTO lx_document_bcs.
ENDTRY.
lo_send_request->set_document( lo_document ).
DATA:
lo_sender TYPE REF TO if_sender_bcs VALUE IS INITIAL,
lo_send TYPE adr6-smtp_addr VALUE '[email protected]'. "Absender SENDER
lo_sender = cl_cam_address_bcs=>create_internet_address( lo_send ).
Set sender
lo_send_request->set_sender(
EXPORTING
i_sender = lo_sender ).
Create recipient
DATA:
lo_recipient type ref to if_recipient_bcs value is initial.
Data:
lo_rec TYPE adr6-smtp_addr VALUE '[email protected]'. " Empfänger Receiver
lo_recipient = cl_cam_address_bcs=>create_internet_address( lo_rec ).
*lo_recipient = cl_sapuser_bcs=>create( sy-uname ).
Set recipient
lo_send_request->add_recipient(
EXPORTING
i_recipient = lo_recipient
i_express = 'X' ).
*lo_send_request->add_recipient(
*EXPORTING
*i_recipient = lo_recipient
*i_express = 'X' ).
Send email
DATA: lv_sent_to_all(1) TYPE c VALUE IS INITIAL.
lo_send_request->send(
EXPORTING
i_with_error_screen = 'X'
RECEIVING
result = lv_sent_to_all ).
COMMIT WORK.
MESSAGE 'The payment form has been emailed to the Vendor' TYPE 'I'. -
I just started using my iphone 5s. I have a problem with new incoming emails from my POP account. Why are they marked as read automatically even though I have not even opened them yet.
At first I thought it might be because I was using simultaneously my old iPhone 4S so it somehow realized the emails where being pushed to another device and the it marked as read, this has nothing to do since I have deleted the email account from the iPhone 4SContact the email provider for assistance with their service.
-
Problem with Automatic Replies or Out of Office
Hi mates!
I´ve just finished migration Exchange 2003 to Exchange 2010.
Today I´ve removed Exchange 2003.
I have a problem with Automatic Replies or Out of Office. When the user active Automatic Replies in Outlook 2010, He has this Error:
Your Out of Office settings cannot be displayed, because the server is currently unavailable. Try again later.
If I logged into OWA, (Options > Set Automatic Replies) I could set it up and it worked fine.
I run Test E-mail AutoConfiguration command to see if AutoDiscover has been configured and the OOF URL is correct:
https://mail.domain.com/ews/exchange.asmx
I try to browse the OOF URL from IE, It works fine.
Authentication Permission for EWS Virtual Directory is:
Anonymous – Enabled (For IUSER)
Basic – Enabled
Windows – Enabled
Other authentication methods are disabled.
WebServicesVirtualDirectory configuration for URL:
InternalNLBBypassUrl :
https://Server1.domain.local/ews/exchange.asmx
InternalUrl
: https://mail.domain.local/EWS/Exchange.asmx
ExternalUrl
: https://mail.domain.com/EWS/Exchange.asmx
InternalNLBBypassUrl : https:// Server2.domain.local /ews/exchange.asmx
InternalUrl
: https:// mail.domain.local /EWS/Exchange.asmx
ExternalUrl
: https:// mail.domain.com /EWS/Exchange.asmx
I use a certificate for Server HUB/CAS from my CA (Active Directory).
In EMC I have this error for certificate:
The certificate status could not be determinated because the revocation check failed.
But when I generated in the past, this status of this certificate was This certificate is valid for Microsoft Exchange.
I need help, because I don´t know I do…
Thanks.Hi MAS,
As soon as possible I will install this kb in a PC with Outlook 2010.
Yes, I reset IIS, with the same result.
I check this URL, and I run this command: TestOutlookWebServices -identity user01 with this result:
RunspaceId : 1a13d412-b75d-48b5-8938-72ad53f11cb7
Id : 1019
Type : Information
Message : A valid Autodiscover service connection point was found. The Autodiscover URL on this object is https://mail.domain.local/Autodiscover/Autodiscover.xml.
RunspaceId : 1a13d412-b75d-48b5-8938-72ad53f11cb7
Id : 1006
Type : Information
Message : Contacted the Autodiscover service at https://mail.domain.local/Autodiscover/Autodiscover.xml.
RunspaceId : 1a13d412-b75d-48b5-8938-72ad53f11cb7
Id : 1016
Type : Information
Message : [EXCH] The AS service is configured for this user in the Autodiscover response received from https://mail.domain.local/Autodiscover/Autodiscover.xml.
RunspaceId : 1a13d412-b75d-48b5-8938-72ad53f11cb7
Id : 1015
Type : Information
Message : [EXCH] The OAB service is configured for this user in the Autodiscover response received from https://mail.domain.local/Autodiscover/Autodiscover.xml.
RunspaceId : 1a13d412-b75d-48b5-8938-72ad53f11cb7
Id : 1014
Type : Information
Message : [EXCH] The UM service is configured for this user in the Autodiscover response received from https://mail.domain.local/Autodiscover/Autodiscover.xml.
RunspaceId : 1a13d412-b75d-48b5-8938-72ad53f11cb7
Id : 1016
Type : Information
Message : [EXPR] The AS service is configured for this user in the Autodiscover response received from https://mail.domain.local/Autodiscover/Autodiscover.xml.
RunspaceId : 1a13d412-b75d-48b5-8938-72ad53f11cb7
Id : 1015
Type : Information
Message : [EXPR] The OAB service is configured for this user in the Autodiscover response received from https://mail.domain.local/Autodiscover/Autodiscover.xml.
RunspaceId : 1a13d412-b75d-48b5-8938-72ad53f11cb7
Id : 1014
Type : Information
Message : [EXPR] The UM service is configured for this user in the Autodiscover response received from https://mail.domain.local/Autodiscover/Autodiscover.xml.
RunspaceId : 1a13d412-b75d-48b5-8938-72ad53f11cb7
Id : 1022
Type : Success
Message : Autodiscover was tested successfully.
RunspaceId : 1a13d412-b75d-48b5-8938-72ad53f11cb7
Id : 1106
Type : Information
Message : Contacted the Autodiscover service at https://SERVER1.domain.local:443/Autodiscover/Autodiscover.xml.
RunspaceId : 1a13d412-b75d-48b5-8938-72ad53f11cb7
Id : 1116
Type : Information
Message : [EXCH] The AS service is configured for this user in the Autodiscover response received from https://SERVER1.domain.local:443/Autodiscover/Autodiscover.xml.
RunspaceId : 1a13d412-b75d-48b5-8938-72ad53f11cb7
Id : 1115
Type : Information
Message : [EXCH] The OAB service is configured for this user in the Autodiscover response received from https://SERVER1.domain.local:443/Autodiscover/Autodiscover.xml.
RunspaceId : 1a13d412-b75d-48b5-8938-72ad53f11cb7
Id : 1114
Type : Information
Message : [EXCH] The UM service is configured for this user in the Autodiscover response received from https://SERVER1.domain.local:443/Autodiscover/Autodiscover.xml.
RunspaceId : 1a13d412-b75d-48b5-8938-72ad53f11cb7
Id : 1116
Type : Information
Message : [EXPR] The AS service is configured for this user in the Autodiscover response received from https://SERVER1.domain.local:443/Autodiscover/Autodiscover.xml.
RunspaceId : 1a13d412-b75d-48b5-8938-72ad53f11cb7
Id : 1115
Type : Information
Message : [EXPR] The OAB service is configured for this user in the Autodiscover response received from https://SERVER1.domain.local:443/Autodiscover/Autodiscover.xml.
RunspaceId : 1a13d412-b75d-48b5-8938-72ad53f11cb7
Id : 1114
Type : Information
Message : [EXPR] The UM service is configured for this user in the Autodiscover response received from https://SERVER1.domain.local:443/Autodiscover/Autodiscover.xml.
RunspaceId : 1a13d412-b75d-48b5-8938-72ad53f11cb7
Id : 1122
Type : Success
Message : Autodiscover was tested successfully.
RunspaceId : 1a13d412-b75d-48b5-8938-72ad53f11cb7
Id : 1013
Type : Error
Message : When contacting https://mail.domain.local/EWS/Exchange.asmx received the error The request failed withHTTP status 401: Authorization Required.
RunspaceId : 1a13d412-b75d-48b5-8938-72ad53f11cb7
Id : 1025
Type : Error
Message : [EXCH] Error contacting the AS service at https://mail.domain.local/EWS/Exchange.asmx. Elapsed time was694 milliseconds.
RunspaceId : 1a13d412-b75d-48b5-8938-72ad53f11cb7
Id : 1026
Type : Success
Message : [EXCH] Successfully contacted the UM service at https://mail.domain.local/EWS/Exchange.asmx. The elapsed time was 31 milliseconds.
RunspaceId : 1a13d412-b75d-48b5-8938-72ad53f11cb7
Id : 1013
Type : Error
Message : When contacting https://mail.domain.com/EWS/Exchange.asmx received the error The request failed withHTTP status 401: Authorization Required.
RunspaceId : 1a13d412-b75d-48b5-8938-72ad53f11cb7
Id : 1025
Type : Error
Message : [EXPR] Error contacting the AS service at https://mail.domain.com/EWS/Exchange.asmx. Elapsed time was15 milliseconds.
RunspaceId : 1a13d412-b75d-48b5-8938-72ad53f11cb7
Id : 1026
Type : Success
Message : [EXPR] Successfully contacted the UM service at https://mail.domain.com/EWS/Exchange.asmx. The elapsed time was 31 milliseconds.
RunspaceId : 1a13d412-b75d-48b5-8938-72ad53f11cb7
Id : 1124
Type : Success
Message : [Server] Successfully contacted the AS service at https://SERVER1.domain.local/ews/exchange.asmx. The elapsed time was 934 milliseconds.
RunspaceId : 1a13d412-b75d-48b5-8938-72ad53f11cb7
Id : 1126
Type : Success
Message : [Server] Successfully contacted the UM service at https://SERVER1.domain.local/ews/exchange.asmx. The elapsed time was 93 milliseconds.
All ok, but with these errors:
RunspaceId : 1a13d412-b75d-48b5-8938-72ad53f11cb7
Id : 1013
Type : Error
Message : When contacting https://mail.domain.local/EWS/Exchange.asmx received the error The request failed withHTTP status 401: Authorization Required.
RunspaceId : 1a13d412-b75d-48b5-8938-72ad53f11cb7
Id : 1025
Type : Error
Message : [EXCH] Error contacting the AS service at https://mail.domain.local/EWS/Exchange.asmx. Elapsed time was694 milliseconds.
RunspaceId : 1a13d412-b75d-48b5-8938-72ad53f11cb7
Id : 1013
Type : Error
Message : When contacting https://mail.domain.com/EWS/Exchange.asmx received the error The request failed withHTTP status 401: Authorization Required.
RunspaceId : 1a13d412-b75d-48b5-8938-72ad53f11cb7
Id : 1025
Type : Error
Message : [EXPR] Error contacting the AS service at https://mail.domain.com/EWS/Exchange.asmx. Elapsed time was15 milliseconds.
In IIS for EWS has this method Authentication:
- Anonymous
- Basic
- Windows
For SSL Settings in EWS has this configuration:
- Require SSL
- Client Certificate: Ignore
For Default Website in IIS, SSL Settings:
- Require SSL
- Client Certificate: Ignore
I don´t have ISA/TMG. I use HLB KEMP for publishing OWA... -
Problems with my yahoo email account using Firefox
I am using Firefox 14.0.1 and I have problems with my yahoo email account. I send an email, the receiver got a good version of my email, but when I see the same email into my sent box I see a differente text. When I use any other Internet browser, I can see a good version of my original email into the sent box.
Why???Hi,
Please try a '''Ctrl + F5''' refresh. This helps to bring in the page contents afresh. You can also consider the [https://support.mozilla.org/en-US/kb/reset-firefox-easily-fix-most-problems Reset Firefox] feature via '''Help''' ('''Alt''' + '''H''') > '''Troubleshooting Information'''.
(To revert to the previous profile, close the new profile, start Firefox and choose the '''*.default''' profile. While the [https://support.mozilla.org/en-US/kb/profile-manager-create-and-remove-firefox-profiles Profile Manager] is open, you can also delete the newly reset profile (the one containing random numbers)).
[https://support.mozilla.org/en-US/kb/Managing-profiles Managing profiles]
[https://support.mozilla.org/en-US/kb/Profiles?s=profile&r=2&e=sph&as=s Profiles Howto]
If you have security software (antivirus, firewall etc.) installed, you can try deleting all existing instances of Firefox and related files in all the different configuration areas/modules of the security software. Instead create new allow/trusted rules for Firefox + its related processes. Even otherwise the security software may also ask again when Firefox is started and you can try to allow/trust at that time. Please see [https://support.mozilla.org/en-US/kb/Firewalls this].
[http://kb.mozillazine.org/Firewalls AV/Firewalls Configuration] -
Problems with Automatic Workflow Customizing
Hi!
I am having problems with Automatic Workflow Customizing (SWU3). I am trying to execute "Configure RFC Destination" manually. I receive the message "Synchronization of passwords failed".
We are using CUA and it is therefor not possible to create the user from SWU3 which means that WF-BATCH has been created in CUA with a pw which is then filled in by me when executing "Configure RFC Destination".
WF-BATCH has authorization SAP_NEW, SAP_ALL
My user also has SAP_NEW and SAP_ALL and usergroup SUPER.
Does anyone know what might be the problem?
Sincerley
Anders ÖhrlingHello Anders,
Check if the user is locked in SU01. Then check if your user has been created in CUA.
It is recommended to delete WF_BATCH. The system will auto create the user ID WF-BATCH and synchronize the password.
Do let me know if your problem is resolved.
Thank you.
Regards,
Manomeet
- Award points if helpful - -
Problem with links on email templates
Problem with links on email templates
Hi,
We have been having issues with links on our email templates. Some of the links point to the following URL:
http://server'sname/thirdparty/FCKeditor/editor/fckeditor.html?InstanceName=emailTemplatesDTO.htmlBody&Toolbar=NewscaleFCKEditorToolBar#URL
Sometimes we get “Unknown internal error” on the web page.
Can anyone help or advise on how to resolve this issue?
Many thanks,
Wesley.Hi Wesley,
This is rather late, but we've seen the same thing frequently (and I believe can replicate it). It's caused when you a creating a new email by copying the content of an existing one with a name space in it.
Upon copying, the link gets scrambled. The approach we use is to copy the email in to a new template, then strip out all of the URL links and add them back in.
Thanks!
Ant -
Due to problems with my original email I changed my apple id email and password months ago. Suddenly it is reverting to my old email. How do I get it to totally forget the original? I have iPhone, iPad and MacBook Pro.
Hey 1Jerry,
Thanks for the question. You'll want to delete and re-add your iCloud account (utilizing the new Apple ID address). When prompted, opt to keep as much information on your device as possible. The following article provides information on how to do so:
iCloud: Change iCloud feature settings
http://support.apple.com/kb/PH2613
Turn off iCloud completely
Depending on whether you want to stop using iCloud on all or only some devices, do one or more of the following:
On your iOS device’s Home screen, tap Settings > iCloud, then at the bottom of the screen, tap Delete Account.
Thanks,
Matt M. -
Hello,
I have a problem with a few emails i wrote which were in the outbox. The outbox disappeared all of a sudden with my mails... However they were not sent since the email address was not correct (just 3 initials). I was waiting to find out the correct email address of that person, put in in and then sen it...Is there a way to get it back somewhere on the ipad or in some cached folder?
Many thanks for an answe to this.
Swisslady2There is no cache where the emails would be stored on the iPad, but you could try quitting the mail app and then launch it again and see if the emails return.
Go to the home screen first by tapping the home button. Quit/close open apps by double tapping the home button and the task bar will appear with all of you recent/open apps displayed at the bottom. Tap and hold down on any app icon until it begins to wiggle. Tap the minus sign in the upper left corner to close the apps. Tap the home button. Then try mail again. -
How to correct checkout form "there is a problem with the PayPal email address supplied"
PayPal Pro submissions do not go through. The error message reads "We cannot process this transaction because there is a problem with the PayPal email address supplied by the seller."
I called PayPal. They checked and said my checkout form was not sending my email address to them. Any help on getting this to work will be sincerly appreciated. Thank you.- If you want to replace the headphone jack yourself see:
iPod Touch Repair - iFixit
- Apple will only exchange your iPod for a refurbished one for this price, You get a new battery. However, it may not be worth it for a 2G iPod.
Apple - Support - iPod - Repair pricing- A third-party place like this one is less expensive. Google from more places.
iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens -
Problems with sending/receiving picture messages
Does anyone know how to sort problems with sending/receiving picture messages on the iphone 4S? I've gone through all the re-setting etc at the place I bought it and it still doesn't work!! Spoken to 02 and they said it's an issue with Apple software?? Any help appreciated.
Can you send/receive SMS's? If so, and you can't send/receive MMS's, and MMS is turned on in Settings, 99.9% of the time the problem is on your carrier's end...most likely MMS is not provisioned properly on your account, regardless of what your carrier is telling you. Call back & have them remove MMS from your account & then re-provision your account for MMS.
-
I continue to have problems with links in email, they don't Work.
I continue to have problems with links in email, they don't work. When I called apple support she said to hard boot by holding off and home keys and restart. However this is only since the new release of the operating system, it happens ever day and it's getting OLD.. Any solutions?
Yes, almost daily since the iOS update. Is there a permanent solution. And does the hard reboot hurt the iPad?
-
HT1146 problem with bt/yahoo email password
I have had an email set up on my macbook air. suddenly, it started to ask me about password "imap.yahoo.mail does not recognise your password" however, when I log on via Safari I have no problem. I deleted the email, restarted my laptop and still having same problem.
I even tried to set up a different email (hotmail) and still got same pop up window showing the message "imap.yaho.mail server did not recognise your password"!
I am not sure what went wrong. Any advice?My advice would be to ignore the email until Yahoo have had time to fix all the bugs and problems with their new email system.
-
Mail / Login in with Gmail/ received email ok but when problem sending.
I log into my mail using gmail, and was receiving email ok. I tried to send an email to my other gmail account, but it showed up in the spam ?? What's going on?
Thanks.I guess you could try but I don't believe Apple can help with activation lock issues. They may, however, be able to determine if the Apple ID belongs to one of you and reset the password for you if you can prove your identity.
You might want to try calling Apple by going to https://expresslane.apple.com; click 'More Products and Services, then 'Apple ID'. In the next page select 'Other Apple ID Topics' then 'Lost or forgotten Apple ID password'. Perhaps they can help determine if it's your ID and reset the password for you (and they probably have more expertise in doing this than the Apple store). -
I have a problem with setting up email account, I can receive emails but can't send
How do you set up youe email account on iPad?
I followed instructions and I can receive emails but not sendHi,
As far as the outgoing of mail is concern, just verify the below points.
Outgoing mail server.
SSL option
Port no : if its other then the default once.
Outgoing Authentication Method.
Regrads,
Ashwin Bhadra.
http://www.mapledti.com
Maybe you are looking for
-
Urgent!! need help to bounce all the tracks individually with same length.
i have a logic project with 20 (audio/Midi) tracks and i want to bounce all the tracks individually... one way i find is to solo every track and bounce the master everytime... and other way i found was something called export all audio tracks but whe
-
How to display a message in dashboard when the source is not available
Hi, I had a requirement to display a custom message in the dashboard instead of showing the default error message like "Client commands are disabled by administrator" when the source is unavailble for the reports. I'm using Essbase as the source and
-
[SOLVED]X start failure after upgrade: dri3,present modules missing
I start X with ~.xinitrc from console, which won"t work after last upgrade --first in two weeks. (EE) Server terminated with error (1).Closing log file. xinit: giving up xinit: unable to connect to X server: Connection refused xinit: server error Xor
-
I have a problem with my iphone 5
I want to restore the ios 6.1.3 but it says "this phone is not eligible for restore" and then I can not do anything with the phone.
-
Oracle BI Apps financials Full load errors
Hi, I have Oracle BI Apps 7.9.6, Informatica 8.6, EBS R12 is the source When i run a full Load of ETL for Financials- Budget, 24 out of 158 tasks are failing. When i check the log file the log file is as below 558 SEVERE Sat Nov 20 15:08:43 AST 201