E613 SYST: You cannot determine the period for rule 03

Dear All,
We are configuring asset module and using MSTL dep key for Tax books. When we tried to create an asset with MSTL dep key, we encountered error - 'E613 SYST: You cannot determine the period for rule 03'. when verified config OAVH Define Calender Assignments transaction,  Period control '03' is missing for fiscal year variant K4. Period control is exisiting  in Maintain Period Control and but not in Define Calender Assignment. What I understand these period controls are being delivered by SAP. Not sure why period control '03' is missing.  all other period control keys are available.
question is how to add period control 03 so that we can use MSTL dep key. we are currently using 4.7c. Any suggestions would be appreciated.
thanks
Sunil

message went abruptly before I finish.
+++++++++
continuing from previous email
Period control 01 has following entry in the transaction
Fiscal Year Variant        Per control          Name of the period control             Year      Month      Day      Period        Mid Month
K4                                      01                        Pro rata at period start date        blank       0            0             blank        not selected
If I follow SAP help to define period control '03', then I just need to copy period control '01' which is listed above and select 'Mid Month' check box.
Wondering anyone did this in the past. MSTL depreciation key is being used in MACRS tax for US. I am sure people who  have implemented assets module for US with tax dep, they might have encountered this issue.
thanks
Sunil

Similar Messages

  • I cannot retrieve the password for the wifi connection on my imac and so cannot access the internet with my ipad at home.  I have a cable modem. Help please!

    I cannot retrieve the password for the wifi connection on my imac and so cannot access the internet with my ipad at home.  I have a cable modem. Help please!

    If you mean that you cannot remember the password for your WiFi network this will work for you - or it should work if you are the administrator on the Mac.
    You will need to be logged in as the administrator on your Mac and you must know the password - Open Keychain Access on your Mac in the utilities folder, click on Passwords. Find the Airport Network Password listed on the right. Double click on it. Click on show password in the the window that pops up. Enter your administrator password when prompted and click allow.
    If Keychain is locked - you must enter the administrator password there as well to unlock it and access the password.
    If you have set the Mac up for Internet Sharing for the iPad to share the Mac's connection, just create a new network On the Mac with Internet sharing and a new password.

  • Verify EJB after Cannot determine the Java EE module type for

    Hi All,
    I start verify EJB it's throw an exception
    Which cases occurring this exception, how can I resolve this?
    Could not verify successfully.
    java.io.IOException: Cannot determine the Java EE module type for C:\Mystuff\projects\Naki\Naki-ejb\dist\Naki-ejb.jar
         at com.sun.enterprise.deployment.archivist.PluggableArchivistsHelper.getArchivistForArchive(PluggableArchivistsHelper.java:137)
         at com.sun.enterprise.deployment.archivist.PluggableArchivistsHelper.getArchivistForArchive(PluggableArchivistsHelper.java:98)
         at com.sun.enterprise.deployment.archivist.PluggableArchivistsHelper.getArchivistForArchive(PluggableArchivistsHelper.java:110)
         at com.sun.enterprise.deployment.archivist.ArchivistFactory.getArchivistForArchive(ArchivistFactory.java:93)
         at com.sun.enterprise.tools.verifier.VerificationHandler.initStandalone(VerificationHandler.java:204)
         at com.sun.enterprise.tools.verifier.VerificationHandler.<init>(VerificationHandler.java:109)
         at com.sun.enterprise.tools.verifier.Verifier.verify(Verifier.java:140)
         at com.sun.enterprise.tools.verifier.Verifier.main(Verifier.java:114)
    Thanks,

    I'm getting the same error although i'm not receiving those entries in the log. Can someone please respond to this post. I've tried a lot of things but can't seem to figure it out. Please email me at [email protected] if you can help.
    Thanks

  • Cannot determine a value for an exit variable in the Formula fn w/p empty

    Hi All,
    We have an exit variable Z_EX_AR_VAR, the would read a hierarchy node input variable (Z_HN_AREA), which is furthur based on a hierarchy input variable (Z_HR_AREA), and wouuld return the first leaf of it.
    We have implemented a input ready query based on this exit variable and it is getting the first node and is input ready and saves the data to the database.
    It works well in the query when we have filtered the characteristic with the hier and hier node and the exit variables.
    We need to use the same value to be used in the Fox function.
    As per the requirement, the Fox function has to process the zero (empty) records.
    So, we have customized formula function to process emptry records.
    And in the function of type formula function that processes empty records, we have used the following statement.
    DATA AR type ZAREA.
    AR = VARI ( Z_HN_AREA, HIENM=Z_HR_AREA, 1).
    We are getting the following error message:
    Cannot determine a value for the variable Z_HN_AREA.
    Planning function ended with errors.
    What is that we are doing wrong here. Is it with the 'Process Empty Records' function that cannot read the variable.
    How come this variable is working in the query and it is not working in the FOX.
    We have done the variable to variable binding in the WAD also. Still the same problem.
    Any ideas? Thanks in advance.
    Best Regards,
    - Shashi
    Thanks in '

    Hi All,
    Michael Wolf from SAP confirmed that we cannot use VARiable read functions in the customized Formula function that processes the zero (empty records) as he spoke to SAP AG about the issue.
    Hence we have made a work around by creating a valid record using a dummy key figure in the Custom Formula function that processes empty records so that in the next step, the regular Formula function would get executed, where we could access the variable values by using VARV, VARI functions.
    Thanks,
    - Shashi

  • I have to unistall my adobe cs5 [s/n removed by moderator], and a trial for Photoshop cc and I cannot find the download for those. Can you help me?

    I have to unistall my adobe cs5 serial number [], and a trial for Photoshop cc and I cannot find the download for those. Can you help me?

    CS5 product downloads are available thru the following page:
    CS5 - http://helpx.adobe.com/creative-suite/kb/cs5-product-downloads.html
    Photoshop CC trial download is available thru its product page:
    Download Photoshop CC by joining Creative Cloud today | Adobe Photoshop CC

  • Attempts exist for this class. You cannot delete the class until you have d

    Attempts exist for this class. You cannot delete the class until you have deleted the attempts.
    Does anyone know how to delete the attemps against a Learning Object. I can delete the enrollments but when I go to delete the class or the learning object i get this message.
    This is for a Test environment.
    Thanks.
    John

    Hi John,
    You are right about the wording.
    There is no simple way of deleting classes. This is because the classes are normally used for the Learner's history and if there is an attempt there is also normally at least one Learner with a history of that Class.
    I know you can delete the Learners from a Class but these scenarios happens so seldom, that we have not yet had the need to have a "delete class feature".
    But if you have the business case for this, you are welcome to raise a SR for an enhancement for this.
    Regards Anders Northeved

  • Crashes when running applications from network share - "Windows cannot access the file for one of the following reasons"

    Hi,
    starting a couple of weeks ago, we get the following error(s) when running applications from a network share. We don't know what causes this, we are not aware of any major changes in our network infrastructure or client/Server configuration. We did upgrade
    a lot of machines to Windows 8, but the issue also occurs on older Win7 computers.
    We figured out a workaround though: The applications run fine when launching from a FQDN share (like
    \\share.domain.Company.com) and only cause problems when running from
    \\share directly. They have worked fine for years without FQDN though.
    Any ideas?
    Error Details (the Kind of error differs greatly):
    # 1 #
    Log Name: Application
    Source: Application Error
    Date: ...
    Event ID: 1005
    Task Category: (100)
    Level: Error
    Keywords: Classic
    User: N/A
    Computer: vmDEV
    Description:
    Windows cannot access the file for one of the following reasons: there is a problem with the network connection, the disk that the file is stored on, or the storage drivers installed on this computer; or the disk is missing. Windows closed the program XYZ
    because of this error.
    Program: XYZ
    File:
    The error value is listed in the Additional Data section.
    User Action
    1. Open the file again. This situation might be a temporary problem that corrects itself when the program runs again.
    2. If the file still cannot be accessed and
    - It is on the network, your network administrator should verify that there is not a problem with the network and that the server can be contacted.
    - It is on a removable disk, for example, a floppy disk or CD-ROM, verify that the disk is fully inserted into the computer.
    3. Check and repair the file system by running CHKDSK. To run CHKDSK, click Start, click Run, type CMD, and then click OK. At the command prompt, type CHKDSK /F, and then press ENTER.
    4. If the problem persists, restore the file from a backup copy.
    5. Determine whether other files on the same disk can be opened. If not, the disk might be damaged. If it is a hard disk, contact your administrator or computer hardware vendor for further assistance.
    Additional data
    Error value: C000020C [ also seen with code C00000C4]
    #2 (German error Messages from now on, we only use German OSes, the above english one is translated based on similar error Messages I found on the web) #
    Name der fehlerhaften Anwendung: XYZ.exe, Version: 2015.0.496.5054, Zeitstempel: 0x54ea67c3
    Name des fehlerhaften Moduls: clr.dll, Version: 4.0.30319.34014, Zeitstempel: 0x52e0b784
    Ausnahmecode: 0xc0000006
    Fehleroffset: 0x00026549
    ID des fehlerhaften Prozesses: 0x13ac
    Startzeit der fehlerhaften Anwendung: 0x01d055a854d36445
    Pfad der fehlerhaften Anwendung: \\share\application.exe
    Pfad des fehlerhaften Moduls: C:\Windows\Microsoft.NET\Framework\v4.0.30319\clr.dll
    Berichtskennung: 949ea933-c19b-11e4-bf04-78542e186754
    Vollständiger Name des fehlerhaften Pakets:
    Anwendungs-ID, die relativ zum fehlerhaften Paket ist:
    Anwendung: XYZ.exe
    Frameworkversion: v4.0.30319
    Beschreibung: Der Prozess wurde aufgrund einer unbehandelten Ausnahme beendet.
    Ausnahmeinformationen: Ausnahmecode c0000006, Ausnahmeadresse 720B6549
    Stapel:
    # 3 #
    Anwendung: WpfApp.exe
    Frameworkversion: v4.0.30319
    Beschreibung: Der Prozess wurde aufgrund einer unbehandelten Ausnahme beendet.
    Ausnahmeinformationen: System.Runtime.InteropServices.SEHException
    Stapel:
       bei SP.Forms.AutoCompleteSelectionBase.OnEnter(System.EventArgs)
       bei System.Windows.Forms.Control.NotifyEnter()
       bei System.Windows.Forms.ContainerControl.UpdateFocusedControl()
    # 4 #
    Anwendung: WpfApp.exe
    Frameworkversion: v4.0.30319
    Beschreibung: Der Prozess wurde aufgrund einer unbehandelten Ausnahme beendet.
    Ausnahmeinformationen: System.Runtime.InteropServices.SEHException
    Stapel:
       bei System.IO.UnmanagedMemoryStream.ReadByte()
       bei System.IO.BinaryReader.ReadByte()
       bei System.IO.BinaryReader.Read7BitEncodedInt()
       bei System.Resources.ResourceReader._LoadObjectV2(Int32, System.Resources.ResourceTypeCode ByRef)
       bei System.Resources.ResourceReader.LoadObjectV2(Int32, System.Resources.ResourceTypeCode ByRef)
       bei System.Resources.ResourceReader.LoadObject(Int32, System.Resources.ResourceTypeCode ByRef)
       bei System.Resources.RuntimeResourceSet.GetObject(System.String, Boolean, Boolean)
       bei System.Resources.RuntimeResourceSet.GetObject(System.String, Boolean)
       bei System.Resources.ResourceManager.GetObject(System.String, System.Globalization.CultureInfo, Boolean)
       bei System.Resources.ResourceManager.GetStream(System.String, System.Globalization.CultureInfo)
    # 5 #
    Anwendung: WpfApp.exe
    Frameworkversion: v4.0.30319
    Beschreibung: Der Prozess wurde aufgrund einer unbehandelten Ausnahme beendet.
    Ausnahmeinformationen: System.Runtime.InteropServices.SEHException
    Stapel:
       bei System.Reflection.RuntimeParameterInfo.get_Name()
       bei System.Diagnostics.StackTrace.ToString(TraceFormat)
       bei System.Environment.GetStackTrace(System.Exception, Boolean)
       bei System.Exception.GetStackTrace(Boolean)
       bei System.Exception.ToString(Boolean, Boolean)
       bei System.Exception.ToString(Boolean, Boolean)
       bei System.Exception.ToString(Boolean, Boolean)
       bei System.Exception.ToString()
    # 6 #
    Name der fehlerhaften Anwendung: XYZ.exe, Version: 2015.0.496.5054, Zeitstempel: 0x54ea834f
    Name des fehlerhaften Moduls: KERNELBASE.dll, Version: 6.3.9600.17278, Zeitstempel: 0x53eeb460
    Ausnahmecode: 0xe0434352
    Fehleroffset: 0x00012f71
    ID des fehlerhaften Prozesses: 0xa68
    Startzeit der fehlerhaften Anwendung: 0x01d0559cb7ec4ed6
    Pfad der fehlerhaften Anwendung: \\share\XYZ.exe
    Pfad des fehlerhaften Moduls: C:\WINDOWS\SYSTEM32\KERNELBASE.dll
    Berichtskennung: 010514d0-c190-11e4-bf04-78542e186754
    Vollständiger Name des fehlerhaften Pakets:
    Anwendungs-ID, die relativ zum fehlerhaften Paket ist:
    # 7 #
    Name der fehlerhaften Anwendung: XYZ.exe, Version: 2015.0.496.5054, Zeitstempel: 0x54ea7a6e
    Name des fehlerhaften Moduls: ntdll.dll, Version: 6.3.9600.17630, Zeitstempel: 0x54b0d74f
    Ausnahmecode: 0xc0000006
    Fehleroffset: 0x0006db27
    ID des fehlerhaften Prozesses: 0x18dc
    Startzeit der fehlerhaften Anwendung: 0x01d0559cb08529c3
    Pfad der fehlerhaften Anwendung: \\share\xyz.exe
    Pfad des fehlerhaften Moduls: C:\WINDOWS\SYSTEM32\ntdll.dll
    Berichtskennung: ef389186-c18f-11e4-bf04-78542e186754
    Vollständiger Name des fehlerhaften Pakets:
    Anwendungs-ID, die relativ zum fehlerhaften Paket ist:

    Hi,
    >>The applications run fine when launching from a FQDN share
    It sounds like a DNS suffix issue. When this issue occurs, please try to ping share on the client, then check if the corresponding IP address is correct. If the IP address is wrong, please adjust your settings of DNS to make sure that the client can resolve
    the share correctly.
    If it's very hard to change the settings of the DNS for some reason, as a work around, we can add the entry into the clients' hosts file.
    Best Regards.
    Steven Lee Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

  • "Error determining planning periods for calendar "  when running a program

    Hi,
    When i am running a program with date range say "01/05/2011" to "30/06/2011",the program is executing successfully without any error. When i am executing the same program with date range as a) "01/05/2009" to "30/06/2011" and b)"01/05/2008" to "30/06/2011" the program is failing with error as "Error determining planning periods for calendar". Can anyone suggest me what i should do to avoid the failure of the program with above date ranges also.
    Thanks in advance,

    Dear,
    Error message 61123:"Error determining planning periods for calendar &".The PPC planning calendar specified in the material master MRP 2 view for the material is  incorrectly.
    The planning calendar periods are insufficiently maintained for the planning calendar used.
    Check the period of planning calendar in MD26 and generate the correct period.You can avoid the problem in several ways:
    Maintain the planning calendar far enough in the future (at least until beyond  the end of the planning horizon).
    Also check any demand is lies beyond the validity period of planning calendar.
    Reduction of the planning horizon of MRP also can control such issue, as MRP planning horizon lies in an area in which the planning calendar is no longer maintained
    Regards,
    R.Brahmankar

  • 2013 Exchange, Can't connect to Exchange Management Shell. It cannot determine the content type of the HTTP response from the destination computer.

    The following error occurs.
             Welcome to the Exchange Management Shell!
    Full list of cmdlets: Get-Command
    Only Exchange cmdlets: Get-ExCommand
    Cmdlets that match a specific string: Help *<string>*
    Get general help: Help
    Get help for a cmdlet: Help <cmdlet name> or <cmdlet name> -?
    Show quick reference guide: QuickRef
    Exchange team blog: Get-ExBlog
    Show full output for a command: <command> | Format-List
    Tip of the day #0:
    Did you know that the Identity parameter is a "positional parameter"? That means you can use:
     Get-Mailbox "user" instead of: Get-Mailbox -Identity "user"
    It's a neat usability shortcut!
    VERBOSE: Connecting to mail1.dorothy.local.
    New-PSSession : [mail1.dorothy.local] Connecting to remote server mail1.dorothy.local failed with the following error
    message : The WinRM client cannot process the request. It cannot determine the content type of the HTTP response from
    the destination computer. The content type is absent or invalid. For more information, see the
    about_Remote_Troubleshooting Help topic.
    At line:1 char:1
    + New-PSSession -ConnectionURI "$connectionUri" -ConfigurationName Microsoft.Excha ...
    + ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
        + CategoryInfo          : OpenError: (System.Manageme....RemoteRunspace:RemoteRunspace) [New-PSSession], PSRemotin
       gTransportException
        + FullyQualifiedErrorId : -2144108297,PSSessionOpenFailed
    Exception calling "GetComputerSite" with "0" argument(s): "The Specified directory object cannot be found."
    At C:\Program Files\Microsoft\Exchange Server\V15\bin\ConnectFunctions.ps1:164 char:2
    +     $localSite=[System.DirectoryServices.ActiveDirectory.ActiveDirectorySite]::GetC ...
    +    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
        + CategoryInfo          : NotSpecified: (:) [], MethodInvocationException
        + FullyQualifiedErrorId : ActiveDirectoryObjectNotFoundException
    Failed to connect to an Exchange server in the current site.
    Enter the server FQDN where you want to connect.: mail1.dorothy.local
    VERBOSE: Connecting to mail1.dorothy.local.
    New-PSSession : [mail1.dorothy.local] Connecting to remote server mail1.dorothy.local failed with the following error
    message : The WinRM client cannot process the request. It cannot determine the content type of the HTTP response from
    the destination computer. The content type is absent or invalid. For more information, see the
    about_Remote_Troubleshooting Help topic.
    At line:1 char:1
    + New-PSSession -ConnectionURI "$connectionUri" -ConfigurationName Microsoft.Excha ...
    + ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
        + CategoryInfo          : OpenError: (System.Manageme....RemoteRunspace:RemoteRunspace) [New-PSSession], PSRemotin
       gTransportException
        + FullyQualifiedErrorId : -2144108297,PSSessionOpenFailed
    Randy Cheek

    Good Morning,
    Log into the server with an account that has appropriate Exchange rights, not a local account.  
    Note: By default - Domain Admins don't have Exchange rights.
    Dame Luthas, ITILv3, MCSE Messaging 2013, MCSA, MCITP
    My Technical Blog: http://thelifestrategist.wordpress.com
    Discipline is the Difference between Goals and Accomplishments
    If this post is useful, please hit the green arrow on the left & if this is the answer hit "mark as answer"

  • I cannot get itunes to sync all of my songs to my iphone.  Itunes tells me that it cannot locate the files for these songs.  How do I fix this?

    When I attempt to sync my i phone with itunes on my computer not all of the songs make it to my phone.  Itunes is telling me that it cannot find the files for these songs.  How do I fix this?

    Hi fishonfoot,
    Thanks for visiting Apple Support Communities.
    You may want to use this article as a guide to determine if the songs are on your computer:
    iTunes: Finding lost media and downloads
    http://support.apple.com/kb/TS1408
    If the missing songs were purchased from the iTunes Store, see this article for the steps to download them again:
    Downloading past purchases from the App Store, iBookstore, and iTunes Store
    http://support.apple.com/kb/HT2519
    Best Regards,
    Jeremy

  • You cannot maintain the address (partner function 'Ship-to party' is empty)

    Dear Experts,
          I create one outbound delivery but when I click on address ( Symbol next to ship to party) it is showing below error.
    You cannot maintain the address (partner function 'Ship-to party' is empty)
    Message no. VPD017
    I also check customer master , address is maintain properly.
    in partner functions Sold-to party , Bill-to party , Payer , Ship-to party all are same. ( example: if bill to party is ABC then payer , ship to pary , bill to party all are ABC).
    Please help.
    Regards,
    Nirav Desai

    Hii Nirav Desai,
    You do correctly "configure automatic partner determination". The steps are as below -
    Customer Master
    Sales Document Header
    Sales Document Item
    Delivery Type
    Shipment Type
    Billing Header
    Billing item
    Sales Activities
    1.     How to define partner?
    A grouping of partner functions. The procedure specifies which partner functions are allowed for a particular business transaction (for example, for processing a sales order) and which of those partner functions are mandatory.
    Use
    You define partner determination procedures in SD Customizing through Functions -> Partner determinat.
    u2022     In sales documents, for example, you can specify the partner determination procedure according to sales document type and item category. During order entry, the system first proposes partners from the customer master record of the sold-to party. If this information does not exist in the customer master, the system automatically proposes the mandatory partners from the partner determination procedure that you specify in the document header.
    u2022     For billing documents, for example, you can specify a partner determination procedure where the sold-to party, bill-to party, and payer are mandatory but the ship-to party is not (for billing, you are more interested in who orders and pays for the goods than in who receives them).
    Thanks and Regards,
    Santanu

  • Cannot determine shell type for PID 28704, UNKNOWN

    Hi All
    I am using ksh and executing a shell script, but it fails with following error
    Cannot determine shell type for PID 28704, UNKNOWN
    Please let me know if you have any solution for this
    Thanks
    Kanki

    Does the script do a ps -ef and grep for a PID, or does it look in a file for a /var/run/pid file? I would look at the script to see what it is looking for that is tied to the PID of 28704.
    You could also check to see that the script's first line has the correct shell defined.

  • 4500157269 -Document is incomplete: You cannot save the delivery

    Hi all,
    When I try to create an outbound delivery for an STO using t-code VL10B, i get an error saying the following:
    Error Log for coll. run 0000740903.
                4500157269 000000 Document is incomplete: You cannot save the delivery.
               LongText               Detail                 Diagnosis
                        When the system checked whether saving delivery was
                        permitted, it determined that the requirements stored in
                        Define Incompletion Procedures for this document do not
                        allow this subsequent function.
    Please advise how to overcome this problem.
    Thanks
    Kaveri

    Hello Kaveri,
    It seems to me that the "incompletion procedures" for replenishment delivery have not been fulfilled to create the delivery.
    Can you please check what is the incompletion procedure assigned to your replenishment delivery and what fields in that procedure are mandatory to be filled before the delivery document gets generated.
    If these fields are not filled, then the delivery creation fails. Please check the details in the config (LE>Shipping>Basic Shipping functions>incomplete control for deliveries>Assing incompleteness procedure and then define incompletion procedure for the field information at the header and item level).
    If this seems to be lengthy, please check with your SD guy who can quickly check it for you about the incompletion procedure requirements.

  • How to get start date of the period for a given date from cube

    I have a situation where i need to find the start day of the period for a given date. is there a way to know that. i want to use that in my report. i enter the date from my report(i have date parameter), depends on the date, i want to display the start day
    of the period. how can i write expression for that in my report?
    ram

    Hi ramprasad74,
    According to your description, you are using Analysis Services as a data source for the report, the cube has hierarchy: Fyear, FQuarter, FPeriod, fweek, Fdate. You want to add a date parameter to the report, after you changed value of the parameter, the
    report will return the first day of FPeriod.
    To achieve your goal, we need to add a parameter to the report, then use the parameter in mdx query. For detail information, please refer to the following steps:
    In the Report Data pane, right-click on a dataset created from a SQL Server Analysis Services data source type, and then click Query. The MDX query designer opens in Design mode.
    On the toolbar, click Design to toggle to Query mode.
    On the MDX query designer toolbar, click Query Parameters symbol. The Query Parameters dialog box opens.
    In the Parameter column, click <Enter Parameter>, and then type the name of a parameter.
    In the Dimension column, choose a value from the drop-down list.
    In the Hierarchy column, choose a value from the drop-down list.
    In the Default column, from the drop-down list, select a single value.
    Click OK. 
    In query designer dialog box, type the mdx query like below:
    with member [Measures].[FirstChild]
    as
    [Date].[Fiscal].currentmember.parent.firstchild.name
    select {[Measures].[FirstChild]} on 0,
    [Date].[Fiscal].[Date].members on 1
    from
    ( SELECT ( STRTOSET(@ParameterName, CONSTRAINED) ) on 0
    from
    [Cube]
    Here are relevant threads you can reference:
    https://social.msdn.microsoft.com/forums/sqlserver/en-US/c7146ac3-40ea-4d53-b321-c707aebbd405/how-to-pass-date-parameter-to-mdx-query
    https://social.msdn.microsoft.com/forums/sqlserver/en-US/fd12a865-bc90-4a65-af42-ce38a8cfa29b/pass-date-time-parameter-to-mdx-query-ssrs
    If you have any more questions, please feel free to ask.
    Thanks,
    Wendy Fu
    If you have any feedback on our support, please click
    here.

  • After upgrading to Maverick, when I double click on the attchment I get this message "...could not be saved, because you cannot change the contents of that fold

    After upgrading to Maverick, when I double click on the attachment I get this message "...could not be saved, because you cannot change the contents of that folder. Change the folder properties and try again, or try saving in a different location." It happens for all types of files.
    Any suggestions as how to fix this?
    I'm on a Mac OS X 10.9.3 with Thunderbird 24.5.0

    Thunderbird > preferences (I think on a mac) and under attachments set the folder

Maybe you are looking for

  • Error while checking the rate data through installation

    Hi everyone, I am facing an error message while checking the rate data for an installation: "Internal error: Error when reading internal table IEGER in ISU_O_DEVICERATE_OPEN". Please guide. Thanks and Regards

  • Reproducible crash on Win 7 in Loupe View

    This morning I started the beta version again, showing me the grid view. I then double clicked on a photograph and while rendering the view (with the busy spinning thing showing), the application crashed. Fortunately, it happens every time I try to v

  • Multi-Master Replication Limits

    I'm starting new project and would like ask your opinion. They like to have multi-master replication of a single table between Chicago and Denver. A record could be written in Denver, then same row read in Chicago. The opposite is also true. Replicat

  • Unescape XML

    Hi folks, this is my Oracle Version :-( BANNER Oracle9i Enterprise Edition Release 9.2.0.8.0 - 64bit Production PL/SQL Release 9.2.0.8.0 - Production CORE    9.2.0.8.0       Production TNS for IBM/AIX RISC System/6000: Version 9.2.0.8.0 - Production

  • Unable to use updated AppleID so can't update apps

    Hi there, I am having trouble updating apps in my app store. 1) I had an old email address that no longer exists as an Apple ID. About 3 months ago, I went into the same account and simply changed the AppleID AND email address to my new email address