Early help : BAPI_SALESORDER_SIMULATE- FREE GOODS - Warning Message
Hi Gurus,
I am using a BAPI : Z_BAPI_SALESORDER_SIMULATE , this Bapi is similar to the BAPI_SALESORDER_SIMULATE . It has customizations that are similar to the customizations done for order in the SAP system at my organization.
In the Output in the MESSAGETABLE I get the message
<b>
T ID NUM MESSAGE
W V4 160 Minimum quantity 1 EA of free goods has not been reached
Please help me with : What is the reason for this message? I am able to make a sale order with the same data
I am using exactly the same data in VA01 to create a sale order as I am using to test this BAPI: Z_BAPI_SALESORDER_SIMULATE</b>
Please help me at the earliest to solve this problem
BAPI INPUT :
ORDER_HEADER_IN OR
CONVERT_PARVW_AUART
Tables Value
ORDER_ITEMS_IN 1 Entry
ORDER_PARTNERS 2 Entries
ORDER_SCHEDULE_IN 1 Entry
ORDER_CONDITIONS_IN 0 Entries
ORDER_ITEMS_OUT 0 Entries
ORDER_CFGS_REF 0 Entries
ORDER_CFGS_INST 0 Entries
ORDER_CFGS_PART_OF 0 Entries
ORDER_CFGS_VALUE 0 Entries
ORDER_CFGS_BLOB 0 Entries
ORDER_CCARD 1 Entry
ORDER_CCARD_EX 0 Entries
ORDER_SCHEDULE_EX 0 Entries
ORDER_CONDITION_EX 0 Entries
ORDER_INCOMPLETE 0 Entries
MESSAGETABLE 0 Entries
EXTENSIONIN 0 Entries
PARTNERADDRESSES 1 Entry
WMDVSX 0 Entries
WMDVEX 0 Entries
Z_AVAIL_OUT 0 Entries
ORDER_SCHEDULE_IN2 0 Entries
ORDER_SCHEDULE_EX2 0 Entries
ORDER_ITEMS_IN2 0 Entries
ORDER_PARTNERS2 0 Entries
BAPI Output is :
Import parameters Value
ORDER_HEADER_IN OR I have this filled in
CONVERT_PARVW_AUART
DELAY 0
Export parameters Value
SALESDOCUMENT
ORDER_HEADER_EX OR
SOLD_TO_PARTY
SHIP_TO_PARTY
BILLING_PARTY
RETURN
ORDER_HEADER OR SO500750 00/00/0000 00/00/0000
Tables Value
ORDER_ITEMS_IN 1 Entry
Result: 1 Entry
ORDER_PARTNERS 2 Entries
Result: 2 Entries
ORDER_SCHEDULE_IN 1 Entry
Result: 1 Entry
ORDER_CONDITIONS_IN 0 Entries
Result: 0 Entries
ORDER_ITEMS_OUT 0 Entries
Result: 2 Entries
ORDER_CFGS_REF 0 Entries
Result: 0 Entries
ORDER_CFGS_INST 0 Entries
Result: 0 Entries
ORDER_CFGS_PART_OF 0 Entries
Result: 0 Entries
ORDER_CFGS_VALUE 0 Entries
Result: 0 Entries
ORDER_CFGS_BLOB 0 Entries
Result: 0 Entries
ORDER_CCARD 1 Entry
Result: 1 Entry
ORDER_CCARD_EX 0 Entries
Result: 0 Entries
ORDER_SCHEDULE_EX 0 Entries
Result: 2 Entries
ORDER_CONDITION_EX 0 Entries
Result: 0 Entries
ORDER_INCOMPLETE 0 Entries
Result: 0 Entries
MESSAGETABLE 0 Entries
Result: 1 Entry
EXTENSIONIN 0 Entries
Result: 0 Entries
PARTNERADDRESSES 1 Entry
Result: 3 Entries
WMDVSX 0 Entries
Result: 0 Entries
WMDVEX 0 Entries
Result: 0 Entries
Z_AVAIL_OUT 0 Entries
Result: 0 Entries
ORDER_SCHEDULE_IN2 0 Entries
Result: 0 Entries
ORDER_SCHEDULE_EX2 0 Entries
Result: 0 Entries
ORDER_ITEMS_IN2 0 Entries
Result: 1 Entry
ORDER_PARTNERS2 0 Entries
Result: 2 Entries
Additional Note :
Checking CONDITIONS EX , for free goods
I am using Function module :Z_BAPI_SALESORDER_SIMULATE to simulate pricing conditions.
I am trying to figure out the reason for the function module: Z_BAPI_SALESORDER_SIMULATE not giving values in CONDITIONS EX when I use it to simulate free goods .
It is only not giving ORDER_CONDITION_EX for free goods materials.
BAPI simulates Bill of material, regular orders properly.
Example : one material has on free good .
Should give output in ORDER_CONDITION_EX
It is giving an output in ORDER_ITEMS_OUT - two materials line item 10 , 15 .
However in ORDER_CONDITION_EX it does not return anything , number of entries is zero .
I know my data for input are correct as I can make a sale order with the same data.
AMit ,
as per my knowledge , this message is coming from SPRO
<b>T ID NUM MESSAGE
W V4 160 Minimum quantity 1 EA of free goods has not been reached
Please help me with : What is the reason for this message? I am able to make a sale order with the same data</b>
<b>1.First try in Va01 with the same Data then check ? If u get the same message then problem with ur input data</b>
regards
Prabhu
Similar Messages
-
Hi Gurus,
I am using a BAPI : Z_BAPI_SALESORDER_SIMULATE , this Bapi is similar to the BAPI_SALESORDER_SIMULATE . It has customizations that are similar to the customizations done for order in the SAP system at my organization.
In the Output in the MESSAGETABLE I get the message
T ID NUM MESSAGE
W V4 160 Minimum quantity 1 EA of free goods has not been reached
Please help me with : What is the reason for this message? I am able to make a sale order with the same data
I am using exactly the same data in VA01 to create a sale order as I am using to test this BAPI: Z_BAPI_SALESORDER_SIMULATE
Please help me at the earliest to solve this problem
BAPI INPUT :
ORDER_HEADER_IN OR
CONVERT_PARVW_AUART
Tables Value
ORDER_ITEMS_IN 1 Entry
ORDER_PARTNERS 2 Entries
ORDER_SCHEDULE_IN 1 Entry
ORDER_CONDITIONS_IN 0 Entries
ORDER_ITEMS_OUT 0 Entries
ORDER_CFGS_REF 0 Entries
ORDER_CFGS_INST 0 Entries
ORDER_CFGS_PART_OF 0 Entries
ORDER_CFGS_VALUE 0 Entries
ORDER_CFGS_BLOB 0 Entries
ORDER_CCARD 1 Entry
ORDER_CCARD_EX 0 Entries
ORDER_SCHEDULE_EX 0 Entries
ORDER_CONDITION_EX 0 Entries
ORDER_INCOMPLETE 0 Entries
MESSAGETABLE 0 Entries
EXTENSIONIN 0 Entries
PARTNERADDRESSES 1 Entry
WMDVSX 0 Entries
WMDVEX 0 Entries
Z_AVAIL_OUT 0 Entries
ORDER_SCHEDULE_IN2 0 Entries
ORDER_SCHEDULE_EX2 0 Entries
ORDER_ITEMS_IN2 0 Entries
ORDER_PARTNERS2 0 Entries
BAPI Output is :
Import parameters Value
ORDER_HEADER_IN OR I have this filled in
CONVERT_PARVW_AUART
DELAY 0
Export parameters Value
SALESDOCUMENT
ORDER_HEADER_EX OR
SOLD_TO_PARTY
SHIP_TO_PARTY
BILLING_PARTY
RETURN
ORDER_HEADER OR SO500750 00/00/0000 00/00/0000
Tables Value
ORDER_ITEMS_IN 1 Entry
Result: 1 Entry
ORDER_PARTNERS 2 Entries
Result: 2 Entries
ORDER_SCHEDULE_IN 1 Entry
Result: 1 Entry
ORDER_CONDITIONS_IN 0 Entries
Result: 0 Entries
ORDER_ITEMS_OUT 0 Entries
Result: 2 Entries
ORDER_CFGS_REF 0 Entries
Result: 0 Entries
ORDER_CFGS_INST 0 Entries
Result: 0 Entries
ORDER_CFGS_PART_OF 0 Entries
Result: 0 Entries
ORDER_CFGS_VALUE 0 Entries
Result: 0 Entries
ORDER_CFGS_BLOB 0 Entries
Result: 0 Entries
ORDER_CCARD 1 Entry
Result: 1 Entry
ORDER_CCARD_EX 0 Entries
Result: 0 Entries
ORDER_SCHEDULE_EX 0 Entries
Result: 2 Entries
ORDER_CONDITION_EX 0 Entries
Result: 0 Entries
ORDER_INCOMPLETE 0 Entries
Result: 0 Entries
MESSAGETABLE 0 Entries
Result: 1 Entry
EXTENSIONIN 0 Entries
Result: 0 Entries
PARTNERADDRESSES 1 Entry
Result: 3 Entries
WMDVSX 0 Entries
Result: 0 Entries
WMDVEX 0 Entries
Result: 0 Entries
Z_AVAIL_OUT 0 Entries
Result: 0 Entries
ORDER_SCHEDULE_IN2 0 Entries
Result: 0 Entries
ORDER_SCHEDULE_EX2 0 Entries
Result: 0 Entries
ORDER_ITEMS_IN2 0 Entries
Result: 1 Entry
ORDER_PARTNERS2 0 Entries
Result: 2 Entries
Additional Note :
Checking CONDITIONS EX , for free goods
I am using Function module :Z_BAPI_SALESORDER_SIMULATE to simulate pricing conditions.
I am trying to figure out the reason for the function module: Z_BAPI_SALESORDER_SIMULATE not giving values in CONDITIONS EX when I use it to simulate free goods .
It is only not giving ORDER_CONDITION_EX for free goods materials.
BAPI simulates Bill of material, regular orders properly.
Example : one material has on free good .
Should give output in ORDER_CONDITION_EX
It is giving an output in ORDER_ITEMS_OUT - two materials line item 10 , 15 .
However in ORDER_CONDITION_EX it does not return anything , number of entries is zero .
I know my data for input are correct as I can make a sale order with the same data.hello,
I am using a BAPI: Z_BAPI_SALESORDER_SIMULATE, this Bapi is similar to the BAPI_SALESORDER_SIMULATE. It has customizations that are similar to the customizations done for order in the SAP system at my organization.
Checking CONDITIONS EX , for free goods
I am using Function module :Z_BAPI_SALESORDER_SIMULATE to simulate pricing conditions.
I am trying to figure out the reason for the function module: Z_BAPI_SALESORDER_SIMULATE not giving values in CONDITIONS EX when I use it to simulate free goods .
It is only not giving ORDER_CONDITION_EX for free goods materials.
BAPI simulates Bill of material, regular orders properly.
Example : one material has on free good .
Should give output in ORDER_CONDITION_EX
It is giving an output in ORDER_ITEMS_OUT - two materials line item 10 , 15 .
However in ORDER_CONDITION_EX it does not return anything , number of entries is zero .
I<b> know my data for input are correct as I can make a sale order with the same data.
In the Output in the MESSAGETABLE I get the message
T ID NUM MESSAGE
W V4 160 Minimum quantity 1 EA of free goods has not been reached
Please help me with : What is the reason for this message? I am able to make a sale order with the same data</b>
I am using exactly the same data in VA01 to create a sale order as I am using to test this BAPI: Z_BAPI_SALESORDER_SIMULATE
Please help me at the earliest to solve this problem
BAPI INPUT :
ORDER_HEADER_IN OR
CONVERT_PARVW_AUART
Tables Value
ORDER_ITEMS_IN 1 Entry
ORDER_PARTNERS 2 Entries
ORDER_SCHEDULE_IN 1 Entry
ORDER_CONDITIONS_IN 0 Entries
ORDER_ITEMS_OUT 0 Entries
ORDER_CFGS_REF 0 Entries
ORDER_CFGS_INST 0 Entries
ORDER_CFGS_PART_OF 0 Entries
ORDER_CFGS_VALUE 0 Entries
ORDER_CFGS_BLOB 0 Entries
ORDER_CCARD 1 Entry
ORDER_CCARD_EX 0 Entries
ORDER_SCHEDULE_EX 0 Entries
ORDER_CONDITION_EX 0 Entries
ORDER_INCOMPLETE 0 Entries
MESSAGETABLE 0 Entries
EXTENSIONIN 0 Entries
PARTNERADDRESSES 1 Entry
WMDVSX 0 Entries
WMDVEX 0 Entries
Z_AVAIL_OUT 0 Entries
ORDER_SCHEDULE_IN2 0 Entries
ORDER_SCHEDULE_EX2 0 Entries
ORDER_ITEMS_IN2 0 Entries
ORDER_PARTNERS2 0 Entries
BAPI Output is :
Import parameters Value
ORDER_HEADER_IN OR I have this filled in
CONVERT_PARVW_AUART
DELAY 0
Export parameters Value
SALESDOCUMENT
ORDER_HEADER_EX OR
SOLD_TO_PARTY
SHIP_TO_PARTY
BILLING_PARTY
RETURN
ORDER_HEADER OR sales area 00/00/0000 00/00/0000
Tables Value
ORDER_ITEMS_IN 1 Entry
Result: 1 Entry
ORDER_PARTNERS 2 Entries
Result: 2 Entries
ORDER_SCHEDULE_IN 1 Entry
Result: 1 Entry
ORDER_CONDITIONS_IN 0 Entries
Result: 0 Entries
ORDER_ITEMS_OUT 0 Entries
Result: 2 Entries
ORDER_CFGS_REF 0 Entries
Result: 0 Entries
ORDER_CFGS_INST 0 Entries
Result: 0 Entries
ORDER_CFGS_PART_OF 0 Entries
Result: 0 Entries
ORDER_CFGS_VALUE 0 Entries
Result: 0 Entries
ORDER_CFGS_BLOB 0 Entries
Result: 0 Entries
ORDER_CCARD 1 Entry
Result: 1 Entry
ORDER_CCARD_EX 0 Entries
Result: 0 Entries
ORDER_SCHEDULE_EX 0 Entries
Result: 2 Entries
ORDER_CONDITION_EX 0 Entries
Result: 0 Entries
ORDER_INCOMPLETE 0 Entries
Result: 0 Entries
MESSAGETABLE 0 Entries
Result: 1 Entry
EXTENSIONIN 0 Entries
Result: 0 Entries
PARTNERADDRESSES 1 Entry
Result: 3 Entries
WMDVSX 0 Entries
Result: 0 Entries
WMDVEX 0 Entries
Result: 0 Entries
Z_AVAIL_OUT 0 Entries
Result: 0 Entries
ORDER_SCHEDULE_IN2 0 Entries
Result: 0 Entries
ORDER_SCHEDULE_EX2 0 Entries
Result: 0 Entries
ORDER_ITEMS_IN2 0 Entries
Result: 1 Entry
ORDER_PARTNERS2 0 Entries
Result: 2 Entries -
URGENT - BAPI_SALESORDER_SIMULATE- FREE GOODS - ORDER_CONDITION_EX
Hi Gurus,
I am using standard Function module : BAPI_SALESORDER_SIMULATE to simulate pricing conditions.
I am trying to figure out the reason for the function module: BAPI_SALESORDER_SIMULATE not giving values in CONDITIONS EX when I use it to <b>simulate free goods</b> .
<b>It is only not giving ORDER_CONDITION_EX for free goods materials.</b>
BAPI simulates Bill of material, regular orders properly.
Example : one material has on free good .
Should give output in ORDER_CONDITION_EX
It is giving an output in ORDER_ITEMS_OUT - two materials line item 10 , 15 .
However in ORDER_CONDITION_EX it does not return anything , number of entries is zero .
What could be the reason. What is the correct input for the BAPI for it to give conditions in ORDER_CONDITION_EX for free goods.
I know my data for input are correct as I can make a sale order with the same data.
Please help me at the earliest to solve this problem.
<b>BAPIs reference : standard BAPI_SALESORDER_SIMULATE'</b>
CALL FUNCTION 'BAPI_SALESORDER_SIMULATE'
EXPORTING
ORDER_HEADER_IN = order_header_in
CONVERT_PARVW_AUART = ' '
DELAY = 0
IMPORTING
SALESDOCUMENT =
ORDER_HEADER_EX =
SOLD_TO_PARTY =
SHIP_TO_PARTY =
BILLING_PARTY =
RETURN =
ORDER_HEADER =
TABLES
ORDER_ITEMS_IN = order_items_in
ORDER_PARTNERS = order_partners
ORDER_SCHEDULE_IN = order_schedule_in
ORDER_CONDITIONS_IN =
ORDER_ITEMS_OUT =
ORDER_CFGS_REF =
ORDER_CFGS_INST =
ORDER_CFGS_PART_OF =
ORDER_CFGS_VALUE =
ORDER_CFGS_BLOB =
ORDER_CCARD =
ORDER_CCARD_EX =
ORDER_SCHEDULE_EX =
ORDER_CONDITION_EX = order_condition_ex
ORDER_INCOMPLETE =
MESSAGETABLE = messagetable
EXTENSIONIN =
PARTNERADDRESSES =
WMDVSX =
WMDVEX =
AVAIL_OUT =
ORDER_SCHEDULE_IN2 =
ORDER_SCHEDULE_EX2 =
ORDER_ITEMS_IN2 =
ORDER_PARTNERS2
Program being developed based on this BAPI
selection-screen begin of block b1 with frame title text-001.
parameters : p_kunnr like kna1-kunnr,
p_matnr like vbap-matnr,
p_vkorg like vbak-vkorg,
p_vtweg like vbak-vtweg,
p_spart like vbak-spart.
selection-screen end of block b1.
data: doctype like bapisdhead-doc_type value 'OR',
itemno like bapiitemin-itm_number value '000010',
quantity(13) type N value '0000000000001',
partnertype like knvp-parvw value 'AG'.
data :count type i.
data : begin of order_condition_ex occurs 0.
include structure bapicond.
data: end of order_condition_ex.
data: begin of order_header_in.
include structure bapisdhead.
data: end of order_header_in.
data: begin of order_items_in occurs 1.
include structure bapiitemin.
data: end of order_items_in.
data: begin of order_partners occurs 1.
include structure bapipartnr.
data:end of order_partners.
data: begin of order_schedule_in occurs 1.
include structure bapischdl.
data:end of order_schedule_in.
data: begin of messagetable occurs 0 .
Include structure bapiret2.
data: end of messagetable.
order_header_in-doc_type = doctype.
order_header_in-sales_org = p_vkorg.
order_header_in-distr_chan = p_vtweg.
order_header_in-division = p_spart.
order_header_in-purch_date = sy-datum .
order_header_in-req_date_h = sy-datum.
order_items_in-itm_number = itemno.
order_items_in-material = p_matnr.
order_items_in-req_qty = quantity.
append order_items_in.
order_schedule_in-itm_number = itemno.
order_schedule_in-req_qty = quantity.
append order_schedule_in.
order_schedule_in-req_date = sy-datum.
order_partners-partn_role = partnertype.
order_partners-partn_numb = p_kunnr.
append order_partners.
order_partners-itm_number = itemno.
CALL FUNCTION 'Z_BAPI_SALESORDER_SIMULATE'
EXPORTING
ORDER_HEADER_IN = order_header_in
CONVERT_PARVW_AUART = ' '
DELAY = 0
IMPORTING
SALESDOCUMENT =
ORDER_HEADER_EX =
SOLD_TO_PARTY =
SHIP_TO_PARTY =
BILLING_PARTY =
RETURN =
ORDER_HEADER =
TABLES
ORDER_ITEMS_IN = order_items_in
ORDER_PARTNERS = order_partners
ORDER_SCHEDULE_IN = order_schedule_in
ORDER_CONDITIONS_IN =
ORDER_ITEMS_OUT =
ORDER_CFGS_REF =
ORDER_CFGS_INST =
ORDER_CFGS_PART_OF =
ORDER_CFGS_VALUE =
ORDER_CFGS_BLOB =
ORDER_CCARD =
ORDER_CCARD_EX =
ORDER_SCHEDULE_EX =
ORDER_CONDITION_EX = order_condition_ex
ORDER_INCOMPLETE =
MESSAGETABLE = messagetable
EXTENSIONIN =
PARTNERADDRESSES =
WMDVSX =
WMDVEX =
Z_AVAIL_OUT =
ORDER_SCHEDULE_IN2 =
ORDER_SCHEDULE_EX2 =
ORDER_ITEMS_IN2 =
ORDER_PARTNERS2this is not solving it Ashish ,
I am using a BAPI: Z_BAPI_SALESORDER_SIMULATE, this Bapi is similar to the BAPI_SALESORDER_SIMULATE. It has customizations that are similar to the customizations done for order in the SAP system at my organization.
Checking CONDITIONS EX , for free goods
I am using Function module :Z_BAPI_SALESORDER_SIMULATE to simulate pricing conditions.
I am trying to figure out the reason for the function module: Z_BAPI_SALESORDER_SIMULATE not giving values in CONDITIONS EX when I use it to simulate free goods .
It is only not giving ORDER_CONDITION_EX for free goods materials.
BAPI simulates Bill of material, regular orders properly.
Example : one material has on free good .
Should give output in ORDER_CONDITION_EX
It is giving an output in ORDER_ITEMS_OUT - two materials line item 10 , 15 .
However in ORDER_CONDITION_EX it does not return anything , number of entries is zero .
I know my data for input are correct as I can make a sale order with the same data.
In the Output in the MESSAGETABLE I get the message
T ID NUM MESSAGE
W V4 160 Minimum quantity 1 EA of free goods has not been reached
Please help me with : What is the reason for this message? I am able to make a sale order with the same data
I am using exactly the same data in VA01 to create a sale order as I am using to test this BAPI: Z_BAPI_SALESORDER_SIMULATE
Please help me at the earliest to solve this problem
BAPI INPUT :
ORDER_HEADER_IN OR
CONVERT_PARVW_AUART
Tables Value
ORDER_ITEMS_IN 1 Entry
ORDER_PARTNERS 2 Entries
ORDER_SCHEDULE_IN 1 Entry
ORDER_CONDITIONS_IN 0 Entries
ORDER_ITEMS_OUT 0 Entries
ORDER_CFGS_REF 0 Entries
ORDER_CFGS_INST 0 Entries
ORDER_CFGS_PART_OF 0 Entries
ORDER_CFGS_VALUE 0 Entries
ORDER_CFGS_BLOB 0 Entries
ORDER_CCARD 1 Entry
ORDER_CCARD_EX 0 Entries
ORDER_SCHEDULE_EX 0 Entries
ORDER_CONDITION_EX 0 Entries
ORDER_INCOMPLETE 0 Entries
MESSAGETABLE 0 Entries
EXTENSIONIN 0 Entries
PARTNERADDRESSES 1 Entry
WMDVSX 0 Entries
WMDVEX 0 Entries
Z_AVAIL_OUT 0 Entries
ORDER_SCHEDULE_IN2 0 Entries
ORDER_SCHEDULE_EX2 0 Entries
ORDER_ITEMS_IN2 0 Entries
ORDER_PARTNERS2 0 Entries
BAPI Output is :
Import parameters Value
ORDER_HEADER_IN OR I have this filled in
CONVERT_PARVW_AUART
DELAY 0
Export parameters Value
SALESDOCUMENT
ORDER_HEADER_EX OR
SOLD_TO_PARTY
SHIP_TO_PARTY
BILLING_PARTY
RETURN
ORDER_HEADER OR sales area 00/00/0000 00/00/0000
Tables Value
ORDER_ITEMS_IN 1 Entry
Result: 1 Entry
ORDER_PARTNERS 2 Entries
Result: 2 Entries
ORDER_SCHEDULE_IN 1 Entry
Result: 1 Entry
ORDER_CONDITIONS_IN 0 Entries
Result: 0 Entries
ORDER_ITEMS_OUT 0 Entries
Result: 2 Entries
ORDER_CFGS_REF 0 Entries
Result: 0 Entries
ORDER_CFGS_INST 0 Entries
Result: 0 Entries
ORDER_CFGS_PART_OF 0 Entries
Result: 0 Entries
ORDER_CFGS_VALUE 0 Entries
Result: 0 Entries
ORDER_CFGS_BLOB 0 Entries
Result: 0 Entries
ORDER_CCARD 1 Entry
Result: 1 Entry
ORDER_CCARD_EX 0 Entries
Result: 0 Entries
ORDER_SCHEDULE_EX 0 Entries
Result: 2 Entries
ORDER_CONDITION_EX 0 Entries
Result: 0 Entries
ORDER_INCOMPLETE 0 Entries
Result: 0 Entries
MESSAGETABLE 0 Entries
Result: 1 Entry
EXTENSIONIN 0 Entries
Result: 0 Entries
PARTNERADDRESSES 1 Entry
Result: 3 Entries
WMDVSX 0 Entries
Result: 0 Entries
WMDVEX 0 Entries
Result: 0 Entries
Z_AVAIL_OUT 0 Entries
Result: 0 Entries
ORDER_SCHEDULE_IN2 0 Entries
Result: 0 Entries
ORDER_SCHEDULE_EX2 0 Entries
Result: 0 Entries
ORDER_ITEMS_IN2 0 Entries
Result: 1 Entry
ORDER_PARTNERS2 0 Entries
Result: 2 Entries -
BAPI_SALESORDER_SIMULATE- FREE GOODS - ORDER_CONDITION_EX
Hi Gurus,
I am using standard Function module : BAPI_SALESORDER_SIMULATE to simulate pricing conditions.
I am trying to figure out the reason for the function module: BAPI_SALESORDER_SIMULATE not giving values in CONDITIONS EX when I use it to <b>simulate free goods</b> .
It is only not giving ORDER_CONDITION_EX for <b>free goods</b> materials.
BAPI simulates Bill of material, regular orders properly.
Example : one material has on free good .
Should give output in ORDER_CONDITION_EX
It is giving an output in ORDER_ITEMS_OUT - two materials line item 10 , 15 .
However in ORDER_CONDITION_EX it does not return anything , number of entries is zero .
What could be the reason. What is the correct input for the BAPI for it to give conditions in ORDER_CONDITION_EX for free goods.
I know my data for input are correct as I can make a sale order with the same data.
Please help me at the earliest to solve this problem.
<u>BAPIs reference : standard BAPI_SALESORDER_SIMULATE'</u>
CALL FUNCTION 'BAPI_SALESORDER_SIMULATE'
EXPORTING
ORDER_HEADER_IN = order_header_in
CONVERT_PARVW_AUART = ' '
DELAY = 0
IMPORTING
SALESDOCUMENT =
ORDER_HEADER_EX =
SOLD_TO_PARTY =
SHIP_TO_PARTY =
BILLING_PARTY =
RETURN =
ORDER_HEADER =
TABLES
ORDER_ITEMS_IN = order_items_in
ORDER_PARTNERS = order_partners
ORDER_SCHEDULE_IN = order_schedule_in
ORDER_CONDITIONS_IN =
ORDER_ITEMS_OUT =
ORDER_CFGS_REF =
ORDER_CFGS_INST =
ORDER_CFGS_PART_OF =
ORDER_CFGS_VALUE =
ORDER_CFGS_BLOB =
ORDER_CCARD =
ORDER_CCARD_EX =
ORDER_SCHEDULE_EX =
ORDER_CONDITION_EX = order_condition_ex
ORDER_INCOMPLETE =
MESSAGETABLE = messagetable
EXTENSIONIN =
PARTNERADDRESSES =
WMDVSX =
WMDVEX =
AVAIL_OUT =
ORDER_SCHEDULE_IN2 =
ORDER_SCHEDULE_EX2 =
ORDER_ITEMS_IN2 =
ORDER_PARTNERS2
<u>Program being developed based on this BAPI</u>
selection-screen begin of block b1 with frame title text-001.
parameters : p_kunnr like kna1-kunnr,
p_matnr like vbap-matnr,
p_vkorg like vbak-vkorg,
p_vtweg like vbak-vtweg,
p_spart like vbak-spart.
selection-screen end of block b1.
data: doctype like bapisdhead-doc_type value 'OR',
itemno like bapiitemin-itm_number value '000010',
quantity(13) type N value '0000000000001',
partnertype like knvp-parvw value 'AG'.
data :count type i.
data : begin of order_condition_ex occurs 0.
include structure bapicond.
data: end of order_condition_ex.
data: begin of order_header_in.
include structure bapisdhead.
data: end of order_header_in.
data: begin of order_items_in occurs 1.
include structure bapiitemin.
data: end of order_items_in.
data: begin of order_partners occurs 1.
include structure bapipartnr.
data:end of order_partners.
data: begin of order_schedule_in occurs 1.
include structure bapischdl.
data:end of order_schedule_in.
data: begin of messagetable occurs 0 .
Include structure bapiret2.
data: end of messagetable.
order_header_in-doc_type = doctype.
order_header_in-sales_org = p_vkorg.
order_header_in-distr_chan = p_vtweg.
order_header_in-division = p_spart.
order_header_in-purch_date = sy-datum .
order_header_in-req_date_h = sy-datum.
order_items_in-itm_number = itemno.
order_items_in-material = p_matnr.
order_items_in-req_qty = quantity.
append order_items_in.
order_schedule_in-itm_number = itemno.
order_schedule_in-req_qty = quantity.
append order_schedule_in.
order_schedule_in-req_date = sy-datum.
order_partners-partn_role = partnertype.
order_partners-partn_numb = p_kunnr.
append order_partners.
order_partners-itm_number = itemno.
CALL FUNCTION 'Z_BAPI_SALESORDER_SIMULATE'
EXPORTING
ORDER_HEADER_IN = order_header_in
CONVERT_PARVW_AUART = ' '
DELAY = 0
IMPORTING
SALESDOCUMENT =
ORDER_HEADER_EX =
SOLD_TO_PARTY =
SHIP_TO_PARTY =
BILLING_PARTY =
RETURN =
ORDER_HEADER =
TABLES
ORDER_ITEMS_IN = order_items_in
ORDER_PARTNERS = order_partners
ORDER_SCHEDULE_IN = order_schedule_in
ORDER_CONDITIONS_IN =
ORDER_ITEMS_OUT =
ORDER_CFGS_REF =
ORDER_CFGS_INST =
ORDER_CFGS_PART_OF =
ORDER_CFGS_VALUE =
ORDER_CFGS_BLOB =
ORDER_CCARD =
ORDER_CCARD_EX =
ORDER_SCHEDULE_EX =
ORDER_CONDITION_EX = order_condition_ex
ORDER_INCOMPLETE =
MESSAGETABLE = messagetable
EXTENSIONIN =
PARTNERADDRESSES =
WMDVSX =
WMDVEX =
Z_AVAIL_OUT =
ORDER_SCHEDULE_IN2 =
ORDER_SCHEDULE_EX2 =
ORDER_ITEMS_IN2 =
ORDER_PARTNERS2Hi Eswar and friends,
I am using a BAPI : Z_BAPI_SALESORDER_SIMULATE , this Bapi is similar to the BAPI_SALESORDER_SIMULATE . It has customizations that are similar to the customizations done for order in the SAP system at my organization.
<b>
In the Output in the MESSAGETABLE I get the message
<b>
T ID NUM MESSAGE
W V4 160 Minimum quantity 1 EA of free goods has not been reached
</b>
Please help me with : What is the reason for this message?</b> I am able to make a sale order with the same data
<b>I am using exactly the same data in VA01 to create a sale order as I am using to test this BAPI: Z_BAPI_SALESORDER_SIMULATE </b>
Please help me at the earliest to solve this problem
BAPI INPUT :
ORDER_HEADER_IN OR
CONVERT_PARVW_AUART
Tables Value
ORDER_ITEMS_IN 1 Entry
ORDER_PARTNERS 2 Entries
ORDER_SCHEDULE_IN 1 Entry
ORDER_CONDITIONS_IN 0 Entries
ORDER_ITEMS_OUT 0 Entries
ORDER_CFGS_REF 0 Entries
ORDER_CFGS_INST 0 Entries
ORDER_CFGS_PART_OF 0 Entries
ORDER_CFGS_VALUE 0 Entries
ORDER_CFGS_BLOB 0 Entries
ORDER_CCARD 1 Entry
ORDER_CCARD_EX 0 Entries
ORDER_SCHEDULE_EX 0 Entries
ORDER_CONDITION_EX 0 Entries
ORDER_INCOMPLETE 0 Entries
MESSAGETABLE 0 Entries
EXTENSIONIN 0 Entries
PARTNERADDRESSES 1 Entry
WMDVSX 0 Entries
WMDVEX 0 Entries
Z_AVAIL_OUT 0 Entries
ORDER_SCHEDULE_IN2 0 Entries
ORDER_SCHEDULE_EX2 0 Entries
ORDER_ITEMS_IN2 0 Entries
ORDER_PARTNERS2 0 Entries
BAPI Output is :
Import parameters Value
ORDER_HEADER_IN OR I have this filled in
CONVERT_PARVW_AUART
DELAY 0
Export parameters Value
SALESDOCUMENT
ORDER_HEADER_EX OR
SOLD_TO_PARTY
SHIP_TO_PARTY
BILLING_PARTY
RETURN
ORDER_HEADER OR SO500750 00/00/0000 00/00/0000
Tables Value
ORDER_ITEMS_IN 1 Entry
Result: 1 Entry
ORDER_PARTNERS 2 Entries
Result: 2 Entries
ORDER_SCHEDULE_IN 1 Entry
Result: 1 Entry
ORDER_CONDITIONS_IN 0 Entries
Result: 0 Entries
ORDER_ITEMS_OUT 0 Entries
Result: 2 Entries
ORDER_CFGS_REF 0 Entries
Result: 0 Entries
ORDER_CFGS_INST 0 Entries
Result: 0 Entries
ORDER_CFGS_PART_OF 0 Entries
Result: 0 Entries
ORDER_CFGS_VALUE 0 Entries
Result: 0 Entries
ORDER_CFGS_BLOB 0 Entries
Result: 0 Entries
ORDER_CCARD 1 Entry
Result: 1 Entry
ORDER_CCARD_EX 0 Entries
Result: 0 Entries
ORDER_SCHEDULE_EX 0 Entries
Result: 2 Entries
ORDER_CONDITION_EX 0 Entries
Result: 0 Entries
ORDER_INCOMPLETE 0 Entries
Result: 0 Entries
MESSAGETABLE 0 Entries
Result: 1 Entry
EXTENSIONIN 0 Entries
Result: 0 Entries
PARTNERADDRESSES 1 Entry
Result: 3 Entries
WMDVSX 0 Entries
Result: 0 Entries
WMDVEX 0 Entries
Result: 0 Entries
Z_AVAIL_OUT 0 Entries
Result: 0 Entries
ORDER_SCHEDULE_IN2 0 Entries
Result: 0 Entries
ORDER_SCHEDULE_EX2 0 Entries
Result: 0 Entries
ORDER_ITEMS_IN2 0 Entries
Result: 1 Entry
ORDER_PARTNERS2 0 Entries
Result: 2 Entries
<b>Additional Note :</b>
<b>Checking CONDITIONS EX , for free goods</b>
I am using Function module :Z_BAPI_SALESORDER_SIMULATE to simulate pricing conditions.
I am trying to figure out the reason for the function module: Z_BAPI_SALESORDER_SIMULATE not giving values in CONDITIONS EX when I use it to simulate free goods .
It is only not giving ORDER_CONDITION_EX for free goods materials.
BAPI simulates Bill of material, regular orders properly.
Example : one material has on free good .
Should give output in ORDER_CONDITION_EX
It is giving an output in ORDER_ITEMS_OUT - two materials line item 10 , 15 .
However in ORDER_CONDITION_EX it does not return anything , number of entries is zero .
I<b> know my data for input are correct as I can make a sale order with the same data.</b> -
Help - MSI VGA Monitor Warning Message
Hello Friends,
Sorry by my English. I am a spanish user.
I buy a Geforce 4 Ti 4200 Agp8x.
I installed "MSI VGA Monitor Warning Message" but it give me this error message:
Fan speed is unusual
Now fan speed is : 1670 Rpm
Memory voltage is unusual
Now memory voltage is : 3.34 Volt 8b
I have a mb "Asus tuv4x (bios 1.005beta)" with a PentiumIII 1000. I have not installed the msi drivers. I have installed the 43.45 reference nvidia drives.
¿What is that error? ¿the vga or the mb is bad?.
Thanks by your help.Thanks by your reply.
Yes. I loaded 4.47 Via 4in1.
I am running "MSI 3D turbo experience". When I run this sift it open a internet explorer window with a error for a file ".ocx" and after it give the error message about speed fan et voltage.
I read some post that say that this soft dont work well in xp. I have xp.
Now I installed the last version of "3D turbe experience" from web of msi (2,13) and y have lowed the security for the "active x" in the security tab of tools of internet explorer.
Now I have not the error message and the "3D turbo experience" internet explorer page load but it dont give the the speed fan.
Thanks friend. -
Free Goods sub item split in two line items
Sir,
I give free good along with sale item ,but i want free goods quantity split in two lines ,so how I do that?
Please help .Hi,
Free goods has the following limitations:
- Free goods can only be supported on a 1:1 ratio. This means that an order item can lead to a free goods item. Agreements in the following form are not supported: u2018With material 1, material 2 and material 3 are free of chargeu2018 or u2018If material 1 and material 2 are ordered at the same time, then material 3 is free of chargeu2018.
- Free goods are not supported in combinations with material structures (for example, product selection, BOM, variants with BOM explosion).
- Free goods are only supported for sales orders with document category C (for example, not quotations).
- Free goods are not supported for deliveries without reference to a sales order.
- Free goods cannot be used in make-to-order production, third-party order processing and scheduling agreements.
- If you defined a free goods for variants in a generic article (only SAP Retail), you can only process the variants in the purchase order and goods receipt individually (as single articles). In other words, you cannot process them using the generic article matrix.
Not all Sales Order can be used for free goods determination. You have to check the SD document category if it does not work. Only category 'C' are supported. Check transaction VOV8.
Assume that you want to configure an inclusive FREE goods routine. Customers must order a minumum quantity of 5 before any free goods can be assign. For every quantity of 3, the customer will be given 1 free goods.
WC07 - Maintain Number Range Intervals
e.g.
No From number To number
01 0000010000 0000099999
IMG -> Sales and Distribution -> Basic Functions -> Free Goods ->
Maintain Access Sequences
New Entries
Acsq
NA00
Save
Maintain Condition Types
New Entries
Ctyp Name AcSq
FREE Free Goods NA00
Save
Maintain Pricing Procedures
Procedures
New Entries
Procedure Description
FREE Free Goods
Select Procedure FREE then click Control data
Step Cntr Ctyp
10 10 FREE
V/N6 - Activate Free Goods Determination
Assign Order Type OR with Document Procedure A with Procedure FREE
VBN1 - Create free goods determination
e.g. FREE inclusive
Material Min qty From are free good Calc Rule Free Goods
5 3 1 1 1
In this example, if you create a Sales Order for a quantity of 10, SAP will prompt you 7 as the customer order qty and 3 will be free. Customer only pay for the 7 quantity
Hopefully this will help to resolve the answer.
Thanks & regards,
Pankaj Mahajan
Edited by: PM on Apr 13, 2010 10:28 AM -
Changing the password warning message
The password component of our credit card statement comprises of upper case alphabets only. However, if i enter an incorrect password, it gives us a warning message that "Please make sure your caps lock is not on by mistake". This is an incorrect message for us since the password works only with the upper case in our scenario. Please help in changing this warning message while trying to open the PDF. Am also attaching the screen shot.
This is just a general 'incorrect password' warning, with a suggestion for a very common mistake. I don't think the checking mechanism actually checks for upper/lower case characters.
-
Hi guys,
I need some help with the "displaying warning message" in labview 2010 SP1 base development system. My requirement is, I would like to display a warning message (text alert) when the RPM of the pump falls below 10000 rpm. In this case I am measuring the current, voltage and rpm of a pump. Please let me know how I can get this done. I have attached the main vi and the 2 sub-vi for reference. Also let me know how I can set sound alerts in addition to text alerts when the pump RPM falls below 10000 rpm. Thanks for your help.
Raj
Attachments:
Current_Voltage_RPM-_continuous_sampling_count iterations.vi 116 KB
Current_Voltage_RPM-_sub_VI-1.vi 18 KB
Current_Voltage_RPM-_sub_VI-2.vi 17 KBHi Rajesh,
If you want to display a warning text alert ,then you can just create a text on front panel and using VI properties ,can make it as a text alert.For sound alert use sound functions .Please have a look at the attached vi.Run this vi and click visible button ,you can find an alert text with some sound.Modify your logic accordingly.
Regards,
SrikrishnaNF
Attachments:
CheckThisVi.vi 18 KB -
Warning message for customers past due on payment
Hi experts,
I need help to create a warning message (or popup alert) on the delivery for customers that are past due on their payment. Please advise.
Thanks,
JaneHi Jane,
For all pop-up message, you need SDK. There is no simple solution for that.
If you just need an alert, you can create user alert to be send in a scheduled time.
Thanks,
Gordon -
I am using win vista and have installed itunes for my ipod shuffle four years back. now I have purchased iphone 4, and trying to reinstall itunes after uninstalling my earlier itunes i always get a message that error in installation. kindly help
You might find this article helpful: http://support.apple.com/kb/TS3694
It has the error range of 3000's which states
Errors 3000-3999 (3002, 3004, 3013, 3014, 3018, 3164, 3194, and so on): Error codes in the 3000 range generally mean that iTunes cannot contact the gs.apple.com server on ports 80 or 443. This may be because out-of-date or incorrectly configured security or firewall software is interfering, an old version of iTunes is installed, an entry in your hosts file redirecting requests to gs.apple.com (see error 1004 above), or because of your Internet proxy settings. If you are using a proxy, try without using one or with a known-good network. If that does not resolve the issue, follow iTunes for Windows: Troubleshooting security software issues. Error 3014 may indicate that you need to free up more disk space on the computer before trying to restore again. Error 3194 most likely indicates you do not have the latest version of iTunes installed Update to the latest version of iTunes. -
Convert V1-681 message from information to error (free goods)
Dear SD Gurus
We want to give free goods 1 for every 10 sets. The free goods fuctionality is configured and is working fine.
But the free goods quantity in sales order is open for change. Some user may misuse this functionality. How to control the users from modifying the quantity of free goods.
Secondly, if we change the quantity of free goods in sales order to the original sales quantity system generates an information message "V1-681", can we change this to error message ??
kindly help."V1-681", can we change this to error message ??
Yes you can with the help of ABAPer but strictly it is not recommended to change the standard. Rather I would prefer to control your requirement through any of the following sale order exit
a) User exits in the program MV45AFZZ - USEREXIT_READ_DOCUMENT or
b) User exits in the program MV45AFZZ - USEREXIT_SAVE_DOCUMENT
thanks
G. Lakshmipathi -
Warning Message - Tracknumber of CEvLaunch too high! Help?
Hi there
I am attempting to import a midi file I found online into GarageBand 09 but I get the following pop up
*Beta-only warning message - not to be localized:*
*Tracknumber of CEvLaunch too high!*
I'm not really too sure what this means? Does it maybe mean the volume is too high? Or there are too many tracks for Garageband to cope with?
When I click OK a few times on the pop up it then pops up
*Launch Event without associated track found!*
*Changed to track 1.*
I then have only 3 tracks for this song when I know there are many more.
I want to be able to hear and use all of the tracks form this midi file in GarageBand 09.
FYI when I play the midi file with Quicktime 7 it sounds fine, with all the tracks being audible.
Can anyone help?
Thanks!I have a way around this message popping up (but would still like to know why this error appears).
I downloaded this free program
*Midi File Editor 2.01*
Available here
http://mac.softpedia.com/progDownload/Midi-File-Editor-Download-71782.html
Opened the file, and then saved it as a new name.
Imported it to GarageBand and it worked with no errors (although the instruments are way off)
Its a very old feeling program Midi File Editor 2.01, but hey, it worked!
Yay! -
My cs4 mail list sign up has stopped functioning. Need help to correct "warning" messages
Don't know what's happening, but I do have a screen shot of the warning messages:
I'm not code conversant enough to figure this one out. Help!Here ya go:
<?php require_once('Connections/innerchoice_books.php'); ?>
<?php require_once('Connections/innerchoice_books.php'); ?>
<?php require_once('Connections/innerchoice_books.php'); ?>
<?php
if (!function_exists("GetSQLValueString")) {
function GetSQLValueString($theValue, $theType, $theDefinedValue = "", $theNotDefinedValue = "")
if (PHP_VERSION < 6) {
$theValue = get_magic_quotes_gpc() ? stripslashes($theValue) : $theValue;
$theValue = function_exists("mysql_real_escape_string") ? mysql_real_escape_string($theValue) : mysql_escape_string($theValue);
switch ($theType) {
case "text":
$theValue = ($theValue != "") ? "'" . $theValue . "'" : "NULL";
break;
case "long":
case "int":
$theValue = ($theValue != "") ? intval($theValue) : "NULL";
break;
case "double":
$theValue = ($theValue != "") ? doubleval($theValue) : "NULL";
break;
case "date":
$theValue = ($theValue != "") ? "'" . $theValue . "'" : "NULL";
break;
case "defined":
$theValue = ($theValue != "") ? $theDefinedValue : $theNotDefinedValue;
break;
return $theValue;
if (!function_exists("GetSQLValueString")) {
function GetSQLValueString($theValue, $theType, $theDefinedValue = "", $theNotDefinedValue = "")
if (PHP_VERSION < 6) {
$theValue = get_magic_quotes_gpc() ? stripslashes($theValue) : $theValue;
$theValue = function_exists("mysql_real_escape_string") ? mysql_real_escape_string($theValue) : mysql_escape_string($theValue);
switch ($theType) {
case "text":
$theValue = ($theValue != "") ? "'" . $theValue . "'" : "NULL";
break;
case "long":
case "int":
$theValue = ($theValue != "") ? intval($theValue) : "NULL";
break;
case "double":
$theValue = ($theValue != "") ? doubleval($theValue) : "NULL";
break;
case "date":
$theValue = ($theValue != "") ? "'" . $theValue . "'" : "NULL";
break;
case "defined":
$theValue = ($theValue != "") ? $theDefinedValue : $theNotDefinedValue;
break;
return $theValue;
$editFormAction = $_SERVER['PHP_SELF'];
if (isset($_SERVER['QUERY_STRING'])) {
$editFormAction .= "?" . htmlentities($_SERVER['QUERY_STRING']);
if ((isset($_POST["MM_insert"])) && ($_POST["MM_insert"] == "form1")) {
$insertSQL = sprintf("INSERT INTO email_list (ml_fname, ml_lname, ml_email, ml_job, ml_state) VALUES (%s, %s, %s, %s, %s)",
GetSQLValueString($_POST['ml_fname'], "text"),
GetSQLValueString($_POST['ml_lname'], "text"),
GetSQLValueString($_POST['ml_email'], "text"),
GetSQLValueString($_POST['ml_job'], "text"),
GetSQLValueString($_POST['ml_state'], "text"));
mysql_select_db($database_innerchoice_books, $innerchoice_books);
$Result1 = mysql_query($insertSQL, $innerchoice_books) or die(mysql_error());
mysql_select_db($database_innerchoice_books, $innerchoice_books);
$query_rsSubscribers = "SELECT * FROM email_list";
$rsSubscribers = mysql_query($query_rsSubscribers, $innerchoice_books) or die(mysql_error());
$row_rsSubscribers = mysql_fetch_assoc($rsSubscribers);
$totalRows_rsSubscribers = mysql_num_rows($rsSubscribers);
mysql_select_db($database_innerchoice_books, $innerchoice_books);
$query_rsStates = "SELECT * FROM states ORDER BY state_id ASC";
$rsStates = mysql_query($query_rsStates, $innerchoice_books) or die(mysql_error());
$row_rsStates = mysql_fetch_assoc($rsStates);
$totalRows_rsStates = mysql_num_rows($rsStates);
mysql_select_db($database_innerchoice_books, $innerchoice_books);
$query_rsJobs = "SELECT * FROM jobs ORDER BY job_id ASC";
$rsJobs = mysql_query($query_rsJobs, $innerchoice_books) or die(mysql_error());
$row_rsJobs = mysql_fetch_assoc($rsJobs);
$totalRows_rsJobs = mysql_num_rows($rsJobs);
?>
<?php require_once("webassist/email/mail_php.php"); ?>
<?php require_once("webassist/email/mailformatting_php.php"); ?>
<?php
if (!isset($_SESSION))session_start();
if ((($_SERVER["REQUEST_METHOD"] == "POST") && (isset($_SERVER["HTTP_REFERER"]) && strpos(urldecode($_SERVER["HTTP_REFERER"]), urldecode($_SERVER["SERVER_NAME"].$_SERVER["PHP_SELF"])) > 0) && isset($_POST))) {
//WA Universal Email object="mail"
set_time_limit(0);
$EmailRef = "waue_mailList_signup_2";
$BurstSize = 0;
$BurstTime = 0;
$WaitTime = 0;
$GoToPage = "mailList_signup_thanks.php";
$RecipArray = array();
$StartBurst = time();
$LoopCount = 0;
$TotalEmails = 0;
$RecipIndex = 0;
// build up recipients array
$CurIndex = sizeof($RecipArray);
$RecipArray[$CurIndex] = array();
$RecipArray[$CurIndex ][] = "".((isset($_POST["ml_email"]))?$_POST["ml_email"]:"") ."";
$TotalEmails += sizeof($RecipArray[$CurIndex]);
$RealWait = ($WaitTime<0.25)?0.25:($WaitTime+0.1);
$TimeTracker = Array();
$TotalBursts = floor($TotalEmails/$BurstSize);
$AfterBursts = $TotalEmails % $BurstSize;
$TimeRemaining = ($TotalBursts * $BurstTime) + ($AfterBursts*$RealWait);
if ($TimeRemaining < ($TotalEmails*$RealWait) ) {
$TimeRemaining = $TotalEmails*$RealWait;
$_SESSION[$EmailRef."_Total"] = $TotalEmails;
$_SESSION[$EmailRef."_Index"] = 0;
$_SESSION[$EmailRef."_Remaining"] = $TimeRemaining;
while ($RecipIndex < sizeof($RecipArray)) {
$EnteredValue = is_string($RecipArray[$RecipIndex][0]);
$CurIndex = 0;
while (($EnteredValue && $CurIndex < sizeof($RecipArray[$RecipIndex])) || (!$EnteredValue && $RecipArray[$RecipIndex][0])) {
$starttime = microtime_float();
if ($EnteredValue) {
$RecipientEmail = $RecipArray[$RecipIndex][$CurIndex];
} else {
$RecipientEmail = $RecipArray[$RecipIndex][0][$RecipArray[$RecipIndex][2]];
$EmailsRemaining = ($TotalEmails- $LoopCount);
$BurstsRemaining = ceil(($EmailsRemaining-$AfterBursts)/$BurstSize);
$IntoBurst = ($EmailsRemaining-$AfterBursts) % $BurstSize;
if ($AfterBursts<$EmailsRemaining) $IntoBurst = 0;
$TimeRemaining = ($BurstsRemaining * $BurstTime * 60) + ((($AfterBursts<$EmailsRemaining)?$AfterBursts:$EmailsRemaining)*$RealWait) - (($AfterBursts>$EmailsRemaining)?0:($IntoBurst*$RealWait));
if ($TimeRemaining < ($EmailsRemaining*$RealWait) ) {
$TimeRemaining = $EmailsRemaining*$RealWait;
$CurIndex ++;
$LoopCount ++;
session_commit();
session_start();
$_SESSION[$EmailRef."_Index"] = $LoopCount;
$_SESSION[$EmailRef."_Remaining"] = round($TimeRemaining);
session_commit();
wa_sleep($WaitTime);
include("webassist/email/waue_mailList_signup_2.php");
$endtime = microtime_float();
$TimeTracker[] =$endtime - $starttime;
$RealWait = array_sum($TimeTracker)/sizeof($TimeTracker);
if ($LoopCount % $BurstSize == 0) {
$TimePassed = (time() - $StartBurst);
if ($TimePassed < ($BurstTime*60)) {
$WaitBurst = ($BurstTime*60) -$TimePassed;
wa_sleep($WaitBurst);
else {
$TimeRemaining = ($TotalEmails- $LoopCount)*$RealWait;
$StartBurst = time();
if (!$EnteredValue) {
$RecipArray[$RecipIndex][0] = mysql_fetch_assoc($RecipArray[$RecipIndex][1]);
$RecipIndex ++;
$_SESSION[$EmailRef."_Total"] = 0;
$_SESSION[$EmailRef."_Index"] = 0;
$_SESSION[$EmailRef."_Remaining"] = 0;
session_commit();
session_start();
if ($GoToPage!="") {
header("Location: ".$GoToPage);
?>
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="http://www.w3.org/1999/xhtml">
<head>
<meta http-equiv="Content-Type" content="text/html; charset=UTF-8" />
<title>Join the Innerchoice Network</title>
<link href="assets/Main.css" rel="stylesheet" type="text/css" />
<style type="text/css">
<!--
#apDiv2 {
position:absolute;
left:1033px;
top:965px;
width:63px;
height:322px;
z-index:1;
-->
</style>
<style type="text/css">
<!--
a:link {
color: #060;
text-decoration: underline;
a:visited {
text-decoration: underline;
color: #006900;
a:hover {
text-decoration: none;
color: #C60;
a:active {
text-decoration: underline;
color: #DC6100;
#apDiv1 {
position:absolute;
left:790px;
top:506px;
width:80px;
height:80px;
z-index:1;
#apDiv3 {
position:absolute;
width:200px;
height:115px;
z-index:1;
#apDiv4 {
position:absolute;
width:200px;
height:115px;
z-index:1;
#featuredCover {
position:absolute;
width:136px;
height:174px;
z-index:1;
left: 20px;
overflow: hidden;
-->
</style>
<script src="SpryAssets/SpryValidationTextField.js" type="text/javascript"></script>
<script src="SpryAssets/SpryValidationSelect.js" type="text/javascript"></script>
<link href="SpryAssets/SpryValidationTextField.css" rel="stylesheet" type="text/css" />
<link href="SpryAssets/SpryValidationSelect.css" rel="stylesheet" type="text/css" />
</head>
<body>
<div id="specials">
<p>Sign up for the FREE Monday Morning Sharing Circle and More!</p>
</div>
<div id="wrapper">
<div id="header">
<h1>INNERCHOICE Publishing</h1>
<h2>Bringing Emotional Intelligence to Life!</h2>
<!--begin main-nav element-->
<div>
<ul>
<li id="home"><a href="index.html"></a></li>
<li id="books"><a href="books.php" class="visited"></a></li>
<li id="training"><a href="circleWorkshops.html"></a></li>
<li id="resources"><a href="resources.html"></a></li></ul></div>
<!--begn sub-nave element-->
<div id="subNav">
<form method="GET" action="/remsearch.cgi">
<img src="assets/images/homePage/cart.png" alt="cart.gif" width="25" height="15" style="margin-bottom:-2px;">
<a href="cart.php">CART</a> |
<a href="contactHelp.html">CONTACT US</a> |
<a href="contactHelp.html#help">HELP</a> |
<a href="aboutUs.html">ABOUT INNERCHOICE</a>
</form>
</div>
<div id="kids"><img src="assets/images/kids-sans-text.png" width="300" height="442" alt="Happy Kids" />
</div>
</div>
<div id="selResources">
<p><img src="assets/images/homePage/SELresources.png" width="691" height="66" alt="SEL Resources" /></p>
</div>
<div id="mainContent">
<div id="mailList">
<h1>Become part of the Sharing Circle Community. Join in the fun!</h1>
<h2>Sign up now to start enjoying the <span class="free"><br />
FREE</span> Monday Morning Sharing Circle</h2>
<p class="introText">As our site grows,you'll find more and more great resources to support your Social and Emotional Learning efforts. Right now, enjoy a weekly treat as we send the <a href="circleMonday.html">Monday Morning Sharing Circle Topic</a> your way. This is a sample of the <a href="circleCentral.html">EQ Super Strategy</a> that you can use to bring another dimension to your SEL work with students. Here's this week's<a href="circleMonday.html"> Sharing Circle</a>.</p>
<p class="introText"><strong>*</strong>Required fields</p>
<form id="form1" name="form1" method="POST" action=<?php echo $editFormAction; ?>>
<table width="99%" border="0">
<tr>
<td width="606" height="22" valign="bottom" nowrap="nowrap">Email Address: *</td>
</tr>
<tr>
<td align="left" nowrap="nowrap"><span id="spryEmail">
<label>
<input name="ml_email" type="text" id="ml_email" size="60" />
</label>
<span class="textfieldRequiredMsg">An email address is required.</span><span class="textfieldInvalidFormatMsg">Invalid format.</span></span></td>
</tr>
<tr>
<td height="22" valign="bottom" nowrap="nowrap">First Name: *</td>
</tr>
<tr>
<td nowrap="nowrap"><span id="spryFirstname">
<label>
<input name="ml_fname" type="text" id="ml_fname" size="60" />
</label>
<span class="textfieldRequiredMsg">Your first name is required.</span></span></td>
</tr>
<tr>
<td height="22" valign="bottom" nowrap="nowrap">Last Name: *</td>
</tr>
<tr>
<td nowrap="nowrap"><span id="spryLastname">
<label>
<input name="ml_lname" type="text" id="ml_lname" size="60" />
</label>
<span class="textfieldRequiredMsg">Your last name is required.</span></span></td>
</tr>
<tr>
<td height="45"><p>To guide us in giving you the most useful resource please tell us a little more about your role in education and where you are located.</p></td>
</tr>
<tr>
<td height="22" valign="bottom">Please select a category from the following: *</td>
</tr>
<tr>
<td nowrap="nowrap"><span id="spryRole">
<label>
<select name="ml_job" id="ml_job">
<?php
do {
?>
<option value="<?php echo $row_rsJobs['job_id']?>"><?php echo $row_rsJobs['job_title']?></option>
<?php
} while ($row_rsJobs = mysql_fetch_assoc($rsJobs));
$rows = mysql_num_rows($rsJobs);
if($rows > 0) {
mysql_data_seek($rsJobs, 0);
$row_rsJobs = mysql_fetch_assoc($rsJobs);
?>
</select>
<span class="selectRequiredMsg">Please select your role.</span><br />
</label>
</span></td>
</tr>
<tr>
<td height="22" valign="bottom">Please tell us the state in which you work: *</td>
</tr>
<tr>
<td nowrap="nowrap"><span id="spryState">
<label>
<select name="ml_state" id="ml_state">
<option value="AA">select...</option>
<?php
do {
?>
<option value="<?php echo $row_rsStates['state_id']?>"><?php echo $row_rsStates['state_name']?></option>
<?php
} while ($row_rsStates = mysql_fetch_assoc($rsStates));
$rows = mysql_num_rows($rsStates);
if($rows > 0) {
mysql_data_seek($rsStates, 0);
$row_rsStates = mysql_fetch_assoc($rsStates);
?>
</select>
<span class="selectRequiredMsg">Please select your state.</span><br />
</label>
</span></td>
</tr>
<tr>
<td height="40" valign="bottom"><label>
<input type="submit" name="submit" id="submit" value="Sign me up!" />
You'll receive an acknowledgment email from Innerchoice shortly.</label></td>
</tr>
</table>
<input type="hidden" name="MM_insert" value="form1" />
</form>
<p class="introText">In the coming weeks you'll find other exciting things to enhance your SEL experience. These will include articles and insights about making the most of Social and Emotional Learning, and right away, our new monthly newsletter with even more ideas and interesting, engaging, and fun things to do with your students. You probably get that we're inventing this along the way. So we hope to hear your ideas for broadening the impact of our site and its impact on SEL. </p>
</div>
</div>
<div id="mlQuote">
<p>Over the years, Sharing Circles have been one of the best counseling interventions. They are powerful tools for creating social and emotional learning.</p>
<p> </p>
</div>
<div id="mlUpdate">
<h5>Current Subscribers—</h5>
<h5><a href="mailList_updateTrigger.php">Update your information</a></h5>
<p><em>(Keep Your Email address current)</em></p>
<h5><a href="mailList_deleteTrigger.php">Unsubscribe</a></h5>
</div>
<p> </p>
<p> </p>
<div id="events"><a href="icEvents.html"><img src="assets/images/homePage/training_button.png" width="460" height="99" /></a></div>
<div id="bookBrowse"><a href="titleBrowse.php"></a></div>
<!--begin for footer content-->
<div id="footer">
<div class="left">
<h5>About Innerchoice</h5>
<div class="footer-links"> <a href="index.html">Home</a> | <a href="aboutUs.html">Mission</a> | <a href="aboutUs.html#ourStory">History</a> | <a href="aboutUs.html#ourCommitment">Commitment to You</a></div>
<h5>Resources for</h5>
<div class="footer-links"> <a href="contactHelp.html#writersAuthors">Writers and Authors</a> | <a href="resources.html">Those Who Educate</a></div>
</div>
<div class="right">
<div class="icLinks">
<p><a href="mailto:[email protected]">Send Us Your Ideas</a><a href=""></a></p>
<p><a href="contactHelp.html">Contact Us</a> | <a href="contactHelp.html#help">Help</a> | <a href="privacyPolicy.html">Privacy Policy</a> | <a href="siteMap.html">Site Map</a> | <a href="contactHelp.html#internationalRights">International Rights</a></p>
</div>
<div class="copyright"> <a href="aboutUs.html#ourCopyright">Copyright © 2010</a> by <a href="index.html">Innerchoice Publishing, Inc.</a> All rights reserved. </div>
</div>
<hr class="clearing"/>
</div>
</div>
<script type="text/javascript">
<!--
var sprytextfield1 = new Spry.Widget.ValidationTextField("spryEmail", "email", {validateOn:["change"]});
var sprytextfield2 = new Spry.Widget.ValidationTextField("spryFirstname", "none", {validateOn:["change"]});
var sprytextfield3 = new Spry.Widget.ValidationTextField("spryLastname", "none", {validateOn:["change"]});
var spryselect1 = new Spry.Widget.ValidationSelect("spryRole", {validateOn:["change"]});
var spryselect2 = new Spry.Widget.ValidationSelect("spryState", {validateOn:["change"]});
//-->
</script>
</body>
</html>
<?php
mysql_free_result($rsSubscribers);
mysql_free_result($rsStates);
mysql_free_result($rsJobs);
?> -
Supress warning message in Query Analyzer after free characteristic removed
Hi
I have a query and several workbooks looking to the same query.
When I remove a free characteristic from the query (not the cube) I am presented with a warning message when opening Analyzer indicating that the removed field is no longer available on the report.
Is there any way to supress these warning messages? I am aware of the option Settings > Supress warnings from server but I would not want to ask every people to do this in the company. Is there a way I can supress the warning from the query?
We are running 3.x for this particular query and report.
ThanksHi,
In RSRT, you have an option for the suppressing the messages.
Have a look on the below link -
http://wiki.sdn.sap.com/wiki/display/BI/SuppressquerymessagesusingRSRT
Regards,
Geeta -
Since uninstalling / reinstalling iTunes I am not able to sync iPhotos with my Apple TV with the following warning message stating that this is due to a 'problem on your computer. The disk could not be read from or written to'. Please help!
Welcome to Apple Discussions!
Is all the software on your computer up to date?
iTunes
iPod Updater
Also, try The Five R's
btabz
Maybe you are looking for
-
I've been cropping and editing pics in my MacBook Pro but once I try to transfer them to the iPhone or iPad 2 only the photos that have not been manipulated transfer with no problems. How do I solve this problem?
-
How to set Google to UK version
Does anyone know how I can set the inbuilt Google search engine in Safari to search Google.co.uk instead of Google.com? I get too many non-UK resulst for my searches and I'd like to hone them down. Thanks!
-
Missing orders in SAP-Gap in number assignment
Hi All, We are facing a situation where there is a gap in assignment of order numbers. We do not have any trace of any failed updates in ST22,SM13 etc. Does this mean that we missed only a "number" and not an order? Is there any other transactions
-
Having trouble with config files
I am new to text files, what is going on. No matter what network I am on Arch assigns itself 192.168.0.2 My net at home is a 1.1 at school they have 172.16.16.xxx. This is preventing me from pacman -Syu pacman -S xorg pacman -S gnome ecetera
-
select last_day(trunc(to_date(systimestamp,'YYYYMMDD HH24:MI:SS:FF4'))) from dual; it return date format not recognized.what is wrong in this query.