Easy net8 Config Problem in Pentium4  Machine

I am using D2K 6i on P4.I am not able to configure net8 easy config.when i click that option there is no action.
So that i amnot able to server database.
any Ideas?
Cyril

You can modify script file "..\orant\NET80\ADMIN\tnsnames.ora"
LOCAL.WORLD =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = DB Server name)(PORT = 1521))
(CONNECT_DATA = (SID = ORCL))
HAFEEZ

Similar Messages

  • Forms 6i - Oracle Net8 Easy Config Problem in Pentium4 Machine

    Hello to All:
    I've installed the software successfully, but I couldn't open the Oracle Net8 Easy Config in Win. 2000 and Pentium 4 machine. It gave an error message "jre.exe has generated errors and will be closed by window. You will need to restart the program". I restarted the machine, but it's still gave the same error. I also tried to add code in tnsnames.ora, it didn't help either.
    I need some help please,
    Thanks in advance,
    TD

    You can modify script file "..\orant\NET80\ADMIN\tnsnames.ora"
    LOCAL.WORLD =
    (DESCRIPTION =
    (ADDRESS = (PROTOCOL = TCP)(HOST = DB Server name)(PORT = 1521))
    (CONNECT_DATA = (SID = ORCL))
    HAFEEZ

  • Net8 Config/Directory Server Problem

    I have installed personnal 8i on my Windows 2000 Advanced Server box. I want to test it on this server only, don't want to do any networking, etc. How do I set up the Net8 config for no networking. Do I need to ?
    I can get the listener set up and started, but do I need it ?
    Every time I try to do anything, I get an error regarding "can't connect to a directory server" I have been trying to use the Net8 config ass't to set it, but can't get that working either. The server does have a host name and an IP address, but does'nt belong to a domain. I don't want to install active directory.
    How can I get this to run "stand alone" ??
    Thanks in advance for your help.
    Greg Stahl

    The directory server reports all connections, requests and results in the logs/access file (under the instance directory).
    All errors are reported in the logs/errors file.
    Additional messages can be generated by changing the errorlog level and infolog levels via the Console, or via LDAP. Please refer to the Administration Guide and the Reference Manual for the details.
    Regards,
    Ludovic.

  • Oracle 8.1.7 does not install in pentium4 machine

    oracle 8.1.7 does not install in pentium4 machine. When I insert the disk, it fails to start. If I click setup.exe, it again fails to start installer. The problem is due to Pentium4. Any help? or any link/lead on this issue?
    Thanks.
    Jay

    There are some known bugs with Pentium 4 and Oracle 8i. Here is a copy of the posted solution:
    Re: [cornball] Oracle 8i installation on a Pentium 4 machine [In reply to] Can't Post
    I had the same problem on Pentium 4 machine. I found the following solution and also posted it on www.orafaq.net.
    The Oracle installation is now Java based. Oracle 8.1.7 comes with JRE 1.1.7 which is not supported on Intel P4. There is a new version of JRE 1.1.8 available from SUN. Which can be downloaded fron java.sun.com.
    http://java.sun.com/products/archive/jdk/1.1.8_007/jre/index.html
    Now follow these steps:
    1. Install JRE 118 (consider installation folder as C:\Program Files\JRE118)
    2. Copy Oracle installation to some folder e.g. C:\OraInst
    3. Copy "bin" and "lib" folders from
    "C:\Program Files\JRE118" to
    "C:\OraInst\stage\Components\oracle.swd.jre\1.1.7.30\1\DataFiles\Expanded\jre\win32"
    4. Now run the setup.
    It will run perfectly.
    HTH,
    Willis

  • "Audio configuration problem" on one machine, not the other

    I have a laptop and a desktop both with Vista Home Premium SP1. I have ITunes and Quicktime on both. I can run ITunes on the desktop without getting the "audio config problem" message, but on the laptop (Toshiba Satellite A215-S5837) I have tried the fix (uninstall and re-install QT) with no luck. At first I thought the problem was fixed, but after turning the machine off and back on, the problem is still there.
    Any help?
    Thank you,
    Dave

    Unfortunately, the noir household Vista box is in a different hemisphere from my current location (it's in North Carolina), and I can't doublecheck the way that the Audio control panels are set up on Vista.
    ... but in XP, the first thing I would check on with a recalcitrant "audio configuration" error would be if the correct default device was showing up in the "Sound playback" area of the "Audio" tab of the "Sounds and audio devices" control panel.
    Can you find such a location in your Vista control panel on the PC getting the "audio configuration" error?

  • Problems with Time machine caused by removing PKCS11.log?

    I haven't yet found a solution to my Time Machine no longer backing up: "while an error occurred while copying files to the backup disk"
    I requested help before, but so far nobody could help me solve this problem!
    I noticed that I removed, in a file clean up, a log file: PKCS11.log."
    I still have this file in the Trash but can not restore this file from Trash to its original location because I don't know its original location. The command" restore", or "put back" does not figure in the menu of Trash.
    It can be that the removal of this log file causes the back up problem in Time Machine?
    As you will notice from the above, I know very little about software and subjects like this and hope that somebody can help me to get Time Machine backing up again.
    Thanks on beforehand!
    Harry

    I am sorry that my message is presented in this "step-by-step way, but it can be that the following lessage from TM Buddy Widget is important?
    Starting standard backup
    Attempting to mount network destination using URL: afp://Harry%[email protected]/Data
    Mounted network destination using URL: afp://Harry%[email protected]/Data
    QUICKCHECK ONLY; FILESYSTEM CLEAN
    Disk image /Volumes/Data/Harry Briels’s iMac.sparsebundle mounted at: /Volumes/Time Machine Backups
    Backing up to: /Volumes/Time Machine Backups/Backups.backupdb
    No pre-backup thinning needed: 8.22 GB requested (including padding), 464.29 GB available
    Indexing a file failed. Returned 200 for: /Library/Application Support/Adobe/Adobe PCD/cache/cache.db, /Volumes/Time Machine Backups/Backups.backupdb/HarryBrielsiMac/2013-07-04-181224.inProgress/46F8E230- 1335-4D3C-BA4F-E6A4B2AB0C07/Macintosh HD/Library/Application Support/Adobe/Adobe PCD/cache/cache.db
    Aborting backup because indexing a file failed.
    Stopping backup.
    Copied 86 files (266.0 MB) from volume Macintosh HD.
    Copy stage failed with error:11
    Backup failed with error: 11
    Ejected Time Machine disk image.
    Ejected Time Machine network volume.
    Harry

  • Problems whit Time Machine in OSX 10.8.2.

    Hello, i have randomly problems whit Time Machine in OSX 10.8.2. The drive is then read only. After a disconnect and a new connect the problem is solved. Peter

    The drive is probably failing and should be replaced.

  • HT1338 problems with time  machine and parallels desktop,  mac osx mountain lion 10.8

    have a good day, i have been problems with time  machine and parallels desktop, dont work in mac osx 10.8, i upgrate two mac´s (macbook air, imac), in the two machines shows problems, could you help me please.
    two machines have good ram memory (macbook air 11.1 2010 early , imac 2009 late).
    i am waiting for your help.
    thanks.
    Jesus.

    Take a look here:
    http://pondini.org/TM/Troubleshooting.html
    Specifically, you'll probably want to try item #A5 on that page, but there's a lot of other info there that may be useful.

  • Problem using Time Machine with Seagate BackUp Plus Pls HELP!!

    I have a late 2006 iMac (running OS 10.5.8) & am trying to back up using Time Machine with a new Seagate BackUp Plus drive. When I select the Seagate drive in Time Machine it tells me I msut first erase the (Seagate) disk. When I hit ERASE, I get a Time Machine error : COULD NOT UNMOUNT DISK. I see from various posts that 10,5 & 10,6 have issues with some external drives so want to upgrade to Mavericks (to get around this incompatibility issue): HOwever apparently my iMac is too old (by 1 year) to allow this. Can anyone give me any advice on how to get my iMac content backed up via Time Machine using the Seagate BackUP PLus drive I  bought (becasue it is supposedly "compatible with PCs & Macs".
    Thank you!!
    Wendy

    Your Seagate drive should work just fine. If it doesn't have any important data on it, try re-formatting it with Disk Utility to blank it out. Or run the Disk verify/repair and see if you can get it to fix any problems.
    I have a Drobo FS too. You probably need a firmware update, they issued one a while back to fix problems with Time Machine. Use the Dashboard or download it from their support site, http://www.drobo.com/support/updates.php
    Just curious how long you let it run after it "stalled". If it is a big file it could just be taking a while to copy over, do you see activity lights on the USB drive? The first time you use time machine let it run overnight, it's going to take a while, after that it will update quickly.
    While you're at it, you might want to verify your start-up disk too with Disk Utility.

  • Problem with Time Machine/Finder not finding and (keeping) remote drive

    I have a Mac Pro and hooked 2 Western Digital My Book 750GB drives via Firewire onto it to use as my time machine backup for the two MBP's in the house.
    The problem I run into may be more network related than Time Machine related. I have the file sharing turned on in Mac OS 10.5.2. I am able to select Mac Pro in Finder on each MBP and then under that select my Time Machine drive. Then within Time Machine I can select the My Book as my Time Machine drive. At this point I have no problem using Time Machine.
    Where the problem occurs is if I use Finder to browse other drives such as an Internal Drive I have in my MBP or my Mac Mini's drive it no longer can find the Time Machine drive. It just is like it loses sight of it somehow. All I need to do is once again go to Finder/Mac Pro and then select the specific Time Machine drive and then Time Machine is fine again.
    How can I get around this? It seems i have to make some type of permanent logon or so to this drive.

    1. try plugging in directly (think you did this already)
    2. try a different cable - switch to the one you know works.
    3. try a different port on the case.
    4. does the faulty one power up at all? can you hear the drive spinning?
    5. try switching to the good power adapter if you are not seeing action under #4.
    there may also be a reset button on the board or case.
    if these are not working, then the bridgeboard has died in the case. there is a board that the drive plugs into that gives you the firewire, usb connections, etc. the drive likely hasn't failed, you just need a new bridgeboard or case, as I doubt maxtor will sell you just that part. the drive can be pulled & put into another case.
    check out macsales.com if you need a new case.

  • Problem with Time Machine Backup or Maybe Not Time Machine

    The problem manifests after a Time Machine backup.
    I have an iMac 24-inch, Early 2008. iMac 8,1
    Intel Core 2 Duo, 4GB RAM.
    Last week I purchased two  4-Terabyte G-technology G-Drives. Each drive is equip with FireWire 800 and USB 3.0/2.0. In general use they seem to work fine on the iMac.
    I designated one drive as a Time Machine Volume. This is where the problem happens.
    Time Machine will do the initial backup just fine. Then it runs once per hour with no problem. Intermittently however, Time Machine will fail and report :
    “Time Machine couldn’t complete the backup to “hard disk name”.
    Unable to complete backup. An error occurred while creating the backup folder.”
    Interestingly enough if I try to open a folder on the Time Machine volume using the Finder I get:
    “The operation can’t be completed. An unexpected error occurred (error code -50).
    If I try to eject the volume I get the irksome “Cannot eject volume because it’s currently in use by one or more programs.”
    To resolve this I’ve tried everything, from the banal verifying permissions, to swapping the two G-Drives around, swapping out all the cables, etc.. When the error occurs I go into the shell and check with lsof and always find no software apparently holding or using that volume.
    Very frustrating
    I can force eject the volume, then remount the volume and things are back to normal. Same with restarting.
    This happened under OS X Mountain Lion and is now happening under a clean install of Mavericks.
    I thought that even though I don’t see any MDS  related processes using the drive, it might be spotlight, so I told spotlight not to index the volume. Problem still happens.
    I’ve found that one person had almost this exact same problem at:
    https://discussions.apple.com/thread/4756742
    His solution turned out to be replacing the G-Drive with another brand new G-Drive.
    Unfortunately, I cannot return the drives to the Apple store because the boxes were tossed out. I also don’t relish trying to explain that the drives work just fine until some glitch that occurs either just before or just after a Time Machine backup.
    Does anyone have any suggestions?

    You can also contact G-Drive while the drives are under warranty (one year I believe).
    I have the same problem using Time Machine with the 2T G-Drive and my MacBook Pro. G-Tech emailed me a Firmware Update Utility app and, when that didn't solve the error message problem, they sent me a replacement drive and new cables, twice. The problem persisted; I get one or two backups each day and then the error message. I also can't copy anything to the drive and have to force eject it, so G-Tech suggested I see how well it worked with the USB cable.
    Time Machine works flawlessly with the USB cable and the G-Drive, so G-Tech suggested it is a problem with my Firewire 800 port. I worked with Apple Care over the phone, doing all the tests suggested in Eric's post - testing with Disk Utility, Time Machines interface with my User Accounts, the Operating System, then resetting Time Machine, etc. and then I took it to the Genius Bar so they could run the tests themselves. All looked like it should be fine (but they were using a 1T G-Drive and all testing was done within 30 minutes)...when I got home, after two good backups, I got the error message again.
    Apple Care finally suggested I make a Genius Bar appointment and sit at the store working with my MacBook, the G-Drive and Time Machine running until I got the error message, to prove the only thing left that could possibly be the cause of the problem, is the port.  I did this last Wednesday.
    It is 9 days later and I got my computer back this afternoon...the logic board was replaced because the Firewire 800 port is attached to it...I got my first Time Machine back up at 5:34pm...and the error message again at 7:34pm.
    The only solution, it seems, is to use the USB cable instead of Firewire. USB and Thunderbolt seem to be the direction Apple is taking, which is why so many people have been posting about this problem, here and elsewhere, with no real solutions from Apple. See this article:  http://www.infoworld.com/t/mac-laptop/how-cope-the-end-of-firewire-205957
    I hope the USB works for you too.

  • Where I can get flex-config.xml in Linux machine

    Hell All,
    We are using Linux machine as OS for portal.
    Normally we can get flex-config.xml at UNIX machine atj2ee\cluster\server0\apps\sap.com\irj\servlet_jsp\irj\root\portalapps\co
    m.sap.vc.mmcompiler\res\root\WEB-INF\flex\flex-config.xml location in UNIX machine.
    But irj is not there is Linux machine.
    Can anybody help me?
    Regards,
    Sonal Dubey

    Hi Sonal,
    As mentioned in the SAP note 886209, that is the route to find this file, what i recommend you is to check the Server in this path ... \cluster\*server0*\apps\sap...
    Kind Regards,
    Luis

  • Can't force quit applications problem during Time Machine backups

    I've run into a frustrating problem with Time Machine. I'm using an external 750gb USB hard drive as a backup disk with my Mac Mini; the connection is visa the Firewire 400 port.
    When I'm doing anything that's CPU-intensive while a Time Machine is backing up, it is a 50-50 chance that one or more applications will crash. It is impossible to Force Quit them, which means that it is impossible to log out or shut down. The user is faced with a choice: Kill the whole system, and risk corrupting the system hard drive, or yank out the Time Machine disk's connector, and risk corrupting the Time Machine backup. Of course the latter is preferred, and that's what I've done. Thus far, I haven't seen any corruption on the Time Machine drive, fortunately, but in order to work with my system, I have had to disable Time Machine backups while I am working. (I reconnect the Time Machine drive overnight.)
    I know from some Google searching that others are experiencing this problem. My question is, has anyone figured out why this is happening, or developed a workaround?
    Regards,
    Bryan

    In the process of restoring my MacBookPro from an external TM drive as we speak. I can say with almost 100% certainty that force restarting (holding the power-button down until the book shuts off) will corrupt your start up disk to some extent.
    My problem is that I was away from my network when TM tried to do an update. I'm not sure if TM was actually able to connect to my server but none the less I was on a verizon wireless card and so even a minor backup would have been slow.
    I needed to shut the computer down and leave. I have had TM hang when trying to shut down and tried to tell it to stop the back-up (which it tries to do for hours on end and have had to force quit before... had to run disk first aid that time) So this time I figured Id leave the computer on (though unplugged) while I drove home.
    I did not close the case until the screen went dark. Unfortunately, it had just gone to sleep (a half hour later) instead of shutting off but I did not know that at the time so I shut the case then.
    When I plugged it in in the AM it was dark but not black... I could just see the screen and could see it was frozen. Force restart completely screwed my startup disk. Luckily I have a BU from the night before.
    Maybe TM should also be linked to the location, and or connection you are using. So, if I am away from my LAN it will automatically turn off. I also wish I could set it to back up every x hours instead of every hour.
    Good idea... just needs some work on the routines. (only an hour left on my restore now)

  • Slow backup (and spotlight problems) after time machine restore

    Hi All,
    After having some shaky moments with my macbook pro's internal hard drive, I have now installed a new one. I am running the latest version of 10.6.8.
    The machine is running fine after a restore from my Time machine backup, but there are a few problems:
    1) Time machine is now making a new backup - it looks like it wants to do a complete backup, which is ok as I have the space. However, after about 30 mins it has completed 156k and is now running at about 1k a second (or less).
    2) Spotlight is reindexing, but appears to be stuck on "Estimating indexing time".
    3) I tried opening mail, and it said it had to convert my mailbox - it got part way through the number of messages and stopped. I force quite, I'll try that one again later.
    Any ideas for 1) and 2) above? I can't see any odd looking messages in the console...
    Cheers

    So... thought I'd update this since it may help someone else later...
    The time machine backup completed fine in the end - it looked like it wanted to do a complete backup but I think it just did a delta in the end.
    The spotlight reindex ran for about another 6 hours, judging by the console messages.
    However, now I'm trying to run mail - and it's stuck on importing the mailbox - it got to 14157 of 57904 and stopped there. The "time remaining" is increasing by about 5 minutes every minute....
    I've seen the following message in the console, which I also saw while it was trying to do the spotlight index last night:
    NSDataMessageStore: couldn't find body
    Anyway, I'll let it run and see what happens...

  • Audio Config" problem after upgrading to 7.6

    I have only had my ipod one week. It is working beautifully. My problem is that I can no longer charge it or add songs to it because I can not open itunes. The previous version worked beautifully on my computer. After I upgraded to 7.6, it stopped working and I get an Audio Config. problem everytime I try to open it. I have tried uninstalling and reinstalling the program but it does not help. What do I need to do to fix this problem?

    I have had my ipod a few weeks - but have nothing but problems letting itunes run the syncing, sometime it works and sometimes it does not. I had to reset my ipod 2 times already just to keep song on here, should have gone with Zune or Sonys (what my wife has) they are not having a single issue...
    I would like to add my voice to his - I upgraded to 7.6, it stopped working and I get an Audio Config. problem everytime I try to open it. I have tried uninstalling and reinstalling the program but it does not help. What do I need to do to fix this problem ! ! ! ! ?

Maybe you are looking for