Easy way to insert a span tag?

Hey all,
I was just curious if there was an easy way to wrap selected text or what not with a tag by clicking a button or something similar?
There is of course the "Insert Div Tag" option, but is there one like this for spans? I feel like maybe I'm just missing this somewhere... :-)
Thanks!
Peter

Well, most of the time when you select some text and apply a different formatting, it will automatically add a span tag for you...
But if you want to manually put one, the quickest way is in code view (I work in split view most of the time...), but if you don't want to go inside the code, there are other ways...
Go into the Insert menu and choose Tag. Then go to the HTML tags section and in the right select span and click Insert. Clicking on the Tag Chooser button in the Common section of the Insert panel will do the same.
A quicker way would be to right-click, select Insert HTML...(or Wrap Tag if you made a selection) and select the span tag, then it Enter (Return).
Hope this helps.
Nelson

Similar Messages

Easy Way To Insert a Page

Has anyone found an easy way to insert another page to your document other then pressing the return button until you get to the bottom of the page your on?
An option to do this would be most helpful
Thanks!

I could not find the icon on the iPhone but If you hold your finger on the screen the option for "more" shows and I found it in there. Thanks for your response!

Is there an easy way to insert a page jump link in Muse?

I have a client that wants to insert embeded videos onto one of his pages. TWELVE OF THEM! That is a lot of scrolling and I am wondering if there is an easy way to insert a page jump sot ath users can click at the video description and jump to the video below?

Hello,
You can achieve this by using the Anchor option in Muse. You will find the Anchor option between the Effects and Browser Fill options in the toolbar at the top of the Page.
Please have a look at the screenshot :
You can follow the steps below to achieve this functionality :
1) Click on this Anchor option and then scroll down to the video where you wnat to place the anchor.
2) Now click just beside the audio and it will place the anchor (the anchor icon) there.
3) Now it will ask you to rename the Anchor. Give it a desired name.
4) Now select the text which you want to be the trigger (which when clicked should scroll down to the video). Now in the Hyperlink option in the toolbar at the top, you should be able to see an Anchors catagory and all the anchor names (you created) listed there.
5) Select the desired target Anchor there and this functionality should work fine for you.
You can create 12 anchors for your 12 videos and place them beside each one of them.
Note : The Anchor icon is not displayed in Preview/Published output. It is only for design mode. But the functionality will still work.
Hope this helps.
Regards,
Sachin

Is there an easier way to insert date into an MS SQL Server database ?

Is there an easier way to insert date into an MS SQL Server database without using the DateFormat?

USe a PreparedStatement and then the method setDate (or setTimestamp )
http://java.sun.com/docs/books/tutorial/jdbc/basics/prepared.html

Easy way to insert a video

Is there a an easy way to add a video to a master page?
Thanks

Hi
You can add youtube or vimeo widget to the master page , or you can embed video on the page using insert HTML.
It would same as how we insert on sub pages.
Are you looking for some specific solution ?
Thanks,
Sanjit

Lync 2013 - Easy way to insert internal server name onto client

A little background. Currently only the IT dept is using Lync 2010 or Lync 2013. We are not using Exchange(happening soon though). Our Lync Server is only internal(again working on building an edge server). Our Lync
clients used to connect automatically with their AD name when restarting or logging into Lync.
Last week we noticed that Lync 2013 has upgraged to Skype for Business. This made us not log into Lync until we figured out why. We finally figured out that if we put the FQDN in the Internal Server name Lync 2013 will work again(was left blank
before). We stopped the updates from going out but a few still got it. We manually went around and fixed those Lync 2013 clients. My question for you all is there an easy way to push the FQDN to the internal server name under Tools-->Personal-->advanced..? Looking
for a script that I can have them click or some other way.

Hi Hurley081182,
Agree with others, it’s recommend to use Lync 2013.admx Administrative Template, which contain the registry-based policy settings that you configure for Group Policy objects in the domain.
For more details, please check out the following article.
Configuring client bootstrapping policies in Lync Server 2013
https://technet.microsoft.com/en-us/library/gg425941%28v=ocs.15%29.aspx
Best regards,
Eric
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Insert a flash file to iweb 09 or an easy way to display photos

Goal: have a photo space on my home page that plays automatically - dissolving one to the next.
I am trying to either insert a flash file to my home page http://web.me.com/ksporterproductions/PWF/Home.html
I've used the html widget with this code:
Flash Files in iWeb - Adding Flash to iWeb
If you value and use Artotems iWeb Tips and Tricks please consider making a $5 donation to support more assistance in the future as well as the charitable work Artotems Co. does for others around the world.
<object classid="clsid:D27CDB6E-AE6D-11CF-96B8-444553540000" id="obj1" codebase="http://download.macromedia.com/pub/shockwave/cabs/ flash/swflash.cab#version=6,0,40,0" border="0" width="800" height="600"><param name="movie" value="http://web.mac.com/youriDisk/docs/flash.swf"><param name="quality" value="High"><embed src="http://web.mac.com/youridisk/docs/flash.swf" pluginspage="http://www.macromedia.com/go/getflashplayer" type="application/x-shockwave-flash" name="obj1" width="800" height="600"></object>
I've also tried doing an imovie - but it doesn't play automatically
Any suggstions for an easy way to do this?? I've been working on it forever!!

Hi,
Check out this site. http://iwebfaq.org/site/iWeb_Movies.html
More help here with tutorials http://discussions.apple.com/thread.jspa?messageID=7301535
And if that doesn't help, you could post in the iWeb forums here: http://discussions.apple.com/category.jspa?categoryID=188
Carolyn

Is there an EASY way to submit podcasts to the itunes store? i've tried creating podcasts in garageband, then somewhere after wordpress itunes doesn't recognize the feed. my process has been (i am open to suggestions for other free and EASY services/me

is there an EASY way to submit podcasts to the itunes store? i've tried creating podcasts in garageband, then somewhere after wordpress itunes doesn't recognize the feed.
my process has been (i am open to suggestions for other free and EASY services/methods):
garageband : create & edit audio. add 1400x1400 image.
share to itunes.
drag file to desktop.
upload .m4a file to google drive.
create a link post in wordpress using "podcast" tag & create "podcast" category.
click on "entries rss" in wordpress, which takes me to the rss subscribe page (which is basically just my wordpress address with "/feed" at the end.
i copy this url.
go to itunes store > then "submit a podcast"
itunes gives me the error message "we had difficulty downloading episodes from your feed."
when i try to subscribe to my podcast in itunes, it does, but gives me no episodes available.
i went back into wordpress and changed settings/ reading settings to : "full text" from "summary"
still the same error message.
i added a feedburner step after wordpress but got the same errors. i don't think i should have to add feedburner.
wordpress seems to be encapsulating the rss, what am i doing wrong?
this so much easier when you could go directly from garage band to iweb to mobileme; i miss those apple days (also idisk).

if anyone has a super EASY process, i would LOVE to know what it is. EASY, meaning no html and also free. there are many free online storage systems available, many of which i currently use. the above process was just me trying to figure it out, if you have an easier method, please share. thank you so much!

Is there a way of adding a b tag in Muse

Is there a way of adding a tag to your muse without the styling being done in a style sheet - For seo purposes I think it is better that the tag is placed in the HTML

No, but there is a way to export : with your bold text selected, create a new character style (Window > Character Styles), then double click it or use the Style Options context menu. In the dialog that appears, select Span Tag: Important. Muse will export any text to which you apply this character style as a element.
Abhishek

Easy way to schedule a job to run for a set period?

Is there an easy way to schedule (dbms_scheduler) a job to run for a set period -say, half an hour- and then to stop.
Currently, I schedule a procedure to do the work (a bunch of inserts or updates, say) and the first line of that procedure assigns sysdate to a variable when it starts. Then as the procedure loops through its work, I compare the current sysdate with that original one, and if the new sysdate>original one by more than 30 minutes, I raise an application error. But it's messy, and I was wondering if there was a nicer way of doing it?

"Admin" -I think you'll find that 'end_time' merely states a time after which the job will not be run. It doesn't do anything to kill off a job which is already running at the time that comes round. Similarly, repeat_interval merely states how often the job should be run, not a time interval within which it must run and outside of which it must stop being run.
Satish: your suggestion looks great. Do you have, or know of, any examples where that is used, though? The doco you pointed to says the parameter raises an event, but that it's up to my event handler to deal with it. I wouldn't have the first idea of how to deal with this in code myself. If I could see a simple example, it would help a lot! Unfortunately, that page doesn't contain such an example!

Is There an Easier Way to Save a PDF for Perfect Binding?

I've always had this problem whenever I do a booklet or magazine that will end up perfect bound: I have my document setup in CS6 with "facing pages" so I can easily design spreads with images and backgrounds that span both pages. Usually, when it prints, it's saddle stitched, so I don't mind if the inside edge has contents from the other page since they will print next to each other anyway. When I've done perfect bound booklets in the past, I've always unchecked "facing pages" and manually duplicated and moved the image that span the entire spread to cover both pages. However, I'm currently working on a 48-page magazine and I really don't feel like doing this... specifically for fear of missing something and overlooking it so that it prints wrong.
Here are some examples:
This first one obviously has one background image that spans both pages of the spread
However, when I try to separate the pages. My same right-hand page now has no background. A good majority of the magazine is laid out this way.
Similarly, this spread with 2 full-page ads have no bleed on the inside margin for proofing purposes. If it were saddle stitched, I wouldn't give a second thought I'd just let the auto bleed pull image from the other ad. Who cares? They're going to be right next to each other anyway. But, since we're going the perfect-bound route, I need for each ad to have full bleed on all 4 sides. Is it just my neuroticism? The inside edge will be glued amongst 47 other pages. Will anyone ever notice that sliver of white, black, and red from the Sarge ad nestled in the spine when they're viewing the Sunrise Detox ad is the cutting is off?
I know you can do the "shuffle pages" thing to help with the ads, but I'm just hoping there's an easier way; a checkbox... something! C'mon, Adobe! You're #1 in the design industry and it's so difficult to work around the facing-pages-full-bleed issue. I know I'm not very advanced with my InDesign experience. But if after several years, many booklets, a few magazines, and a couple version upgrades, I'd like to think I would've found an easier way to do this. You know, kinda like how your new liquid pages features. That would be tremendous if something similar could be implemented for people in printing to quickly change between design spreads, proof spreads, and printing single pages!
Thanks in advance for any help!!
~Coral

If you have facing pages, you have to set up the document with facing pages that is what is it for. If you have a spreadwide design as above, keep the spreads together. There is not even one reason not to do so.
Only for wire-O-bindings might a different workflow useful, but also with facing pages documents and only when the left page and the right page have not a spread wide design:
//// I did one mistake, I created a doument with a right binding, but it would work the same way with left binding.)
1. Create a document with Facing Pages.
2. Select the Spread in the Page Panel (Window > Page Panel) and in the panel’s flyout menu deselect "Allow Selected Spread to Shuffle". The spread’s page number will appear in brackets.
3. Select a single page of the spread and drag it to the side until a vertical bar appears.
4. Now you have the result.
Left and right pages have their own spread and will have a bleed around each page without taking information from the other page.

Is there an easy way to upgrade your OS from 10.5.8 to 10.6

is there an easy way to upgrade your OS from 10.5.8 to 10.6?
Thanks for your help
desmoutis

Welcome to Apple Support Communities
To upgrade, first buy Snow Leopard > http://store.apple.com/us/product/MC573/mac-os-x-106-snow-leopard
It's recommended to make a backup of your files. If the upgrade fails, you will lose data. After making the backup, insert the DVD and follow on-screen steps to upgrade.
That disc will install 10.6.3, so open  > Software Update, and install OS X 10.6.8

In Acrobat Professional 8, what is the best way to insert/combine multiple pdf's together in a large

In Acrobat Professional 8, what is the best way to insert/combine multiple pdf's together in a large volume?
We have 300 pdf reports and need to insert a 2 page cover page infront of each report. Not sure if Batch processing is best???
Thanks for any tips.

Probably each cover page is different too. I would probably just bite the bullet and do each individually. I would create the 2 cover pages in WORD or other word processor and print to cover.pdf. Then open a PDF and Pages>Insert Pages or the cover.pdf to the front of the open PDF and save as to the current PDF. Then repeat 299 times. Each time you would make the appropriate change to the DOC file and print a new cover.pdf file (you might want to turn off open in Acrobat for this processing in the printer properties to save time). Probably a good idea to keep a list of the files to check off what has been done (you can generate a list in DOS by Start>cmd, change the directory to your location [cd path], and do "dir >>list.txt". That will give you a list to use.). There may be an easier way, but by the time you get it figured out you might be done this way.

Is there an easy way to create 2 page imposed PDFs with a background?

I have figured out a way to create a suitable imposed single page PDF using the 'import as layer' action, the action only understands a single paged background PDF.
In other words, I have a PDF that has the suitable marks on it with the pages marked 'Page 1' & 'Page 2'. This is the background PDF.
I open this PDF in Acrobat and run the action that places another PDF (the 'Source' PDF) on multiple layers with different offsets.
The original (template) PDF is 2 pages & the Source PDF for imposition is 2 pages, and even though the 'import as layer' understands that the source PDF being imposed is 2 pages, it does not seem to allow the original (template) PDF to be seen as 2 pages.
There is a 'Target page number' option in the Preview area, but that is grayed out at 1.
So...other than commercial applications, is there an easy way to build a 2 page PDF imposition file??
Maybe a script?

Sabian,
Yes, the Quite software would be perfect, especially the 'Hot'. Tested & works great for us, but the price tag for the 'Hot' is rather steep for our relatively simple process......background template with a 'step & repeat' of the 'live' document.
As I mentioned in the original post, to do this with a single page PDF is simple enough using an action that places the 'live' doc multiple times, but the vast majority of our publications are 2 pages.
Currently runing the action twice for each job. I would save a bit of time if this could be automated to do both sides with one action, or one script.

How can I "nest" CSS span tags?

I have a piece of text to which I want to apply three successive CSS classes, making increasingly broad selections of the text. (Or, conversely, apply to the broadest span of text and then selectively style smaller subsets of the inner text.) Either way I try this, the "span" tags do not end up nested.
For example, I first select a single word and apply CSS style-1 to just the one word. Next, I select 3 words (one being the word I just styled) and apply CSS style-2 to that. Finally, I select the entire clause, which contains the 3 styled words, and apply style-3 to that.
The objective is to have the span tags "nest" -- but when I apply the styles in the Design view using the "Class" selector, the resulting HTML has the span tags starting and stopping for each bit of text, rather than being nested. Rather than that, I want to end up with the effect below:
a clause with some words within the clause.
I can, of course, do this by hand in the Code view but it is very time-consuming. Is there a way to achieve this in the Design view?

Are you attempting something like this?
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="http://www.w3.org/1999/xhtml">
<head>
<meta http-equiv="Content-Type" content="text/html; charset=utf-8" />
<title>Span Tag Nesting</title>
<style type="text/css">
.style-1 {
 font-weight:bold;
.style-2 {
 color:green;
.style-3 {
 font-style:italic;
</style>
</head>
<body>
a clause with some words within the clause.
</body>
</html>
I'm pretty sure you're going to be stuck adding the span tags in by hand. As far as I can tell, there's no way to get DW to nest tags from within Design View. With the way span tags currently work in DW, there is no way for the program to know you want them nested or overwritten when you select an area of text in Design View.
That might be an interesting Feature Request: https://www.adobe.com/cfusion/mmform/index.cfm?name=wishform

Easy way to insert a span tag?

Similar Messages

Maybe you are looking for