ECATT : multiple line itmes

Hi Gurus,
i am creating ecatt with TCD recording. My requirement is if i record a sales order with one line item can i use the same ecatt for multiple line items.
for example if i create a test script z_va01 in this i record a sales order having one line item. For this i created test data and configaration. Can i use same ecatt to create a sales order having multiple line items.
Thanks in advace
anil

Hi Anilkumar,
I don't think you can use same TCD script for single line item and multiple line item. The reason behind is the line items are part of recording. And their positions get recorded. So data has to match with run time behavior of transaction.
In SAPGUI recording, record VA01 transaction for multiple line items first. And see whether you get different dynpro for each line item. If so, then you can make them Optional. Now this script can run for both multiple line item as well as single item provided one dynpro for each line item.
Find the following weblog for SAPGUI recording and making screens optional -
/people/sapna.modi/blog/2006/04/10/ecatt-scripts-creation--sapgui-mode-part-iii
/people/sapna.modi/blog/2006/04/18/ecatt-chaining-parameterization-creation-of-test-datatest-configuration-system-data-part-iv
But my personal experience says not to play much with the recorded scripts in the given scenario. If you can record two different scripts for the different line items, your life will be simpler.
Hope this helps.
PS If the answer solves your query, plz close the thread by marking it Solved and rewarding each reply.

Similar Messages

  • Ecatt multiple line items

    Hi Gurus,
    i am creating ecatt with TCD recording. My requirement is if i record a sales order with one line item can i use the same ecatt for multiple line items.
    for example if i create a test script z_va01 in this i record a sales order having one line item. For this i created test data and configaration. Can i use same ecatt to create a sales order having multiple line items.
    Thanks in advace
    anil

    Hi guys,
    I know it has been a long time since this thread was opened, but I'm facing with the same problem.
    I created the sales order with SAPGUI REC, and added a loop for line item creation and schedule line creation.
    *LINE ITEM NUMBER
    DO ( V_LNIT_NO ).
         SAPGUI ( VA02_2010_STEP_2 ). --> Adding line item
         V_LI_ROW = V_LI_ROW + 1.
    ENDDO.
    And i amended the line item selection Guielement ID - (Changes are in bold)
    'wnd[0]/usr/tabsTAXI_TABSTRIP_OVERVIEW/tabpT\02/ssubSUBSCREEN_BODY:SAPLJ3AD:2930/ssubSUBITEM_L2:SAPMJ3AS:2001/tblSAPMJ3ASTCTRL_LINE_ENTRY/ctxtJ_3ASZDI-MATNR[3,<!V_LI_ROW!>]'
    so that the loop will make the line item selection to the next line.
    My requirement is to upload the data through a excel file, so I created a test configuration with the relevant variables. But the data from the excel line wont populate the loop data, it only repeats the data from the same line over and over again.
    How can I fix this? Please help.
    Ps - I have tried to make the the MATNR_D to a table by adding [], --> MATNR_D[] - Table. And it becomes a <INITIAL>, and by clicking on the value column cell, it goes in to parameter I_MATNR (I defined this)
    and you can add Parameter 1, 2,  3 etc and within the parameter you can add table-line. I read that this is the solution but, the variable is not recorded on the excel sheet as a column. Please help

  • Create ecatt script for one sales order creation with multiple line items

    Hi ,
    I want to create a ecatt script for one sales order creation with multiple line items. Preferably SAP GUI.
    This selection of data will be from an external file/ variants which will have only one row of data in it.
    Firstly: I have to sort the external file having same PO Numbers in an order.Group them together.
    Second: I have to create sales order for those many line items having same PO Number.
    Best Regard
    Taranum

    Hi Micky
    Firstl you should upload the Line items for a particular sales Order in an Internal table
    and then pass that internal table to your BAPI during your coding corresponding to a particu;lar sales order
    In case of any issues pls revert back
    Reward points if helpful
    Regards
    Hitesh

  • Multiple line items with eCATT....again

    Hi folks,
    I am struggling with adding multiple lines in an eCATT script. For this example I will use the Airline demo example from SAP help: http://help.sap.com/saphelp_nw70ehp1/helpdata/en/fd/4f6b3f3d643b3be10000000a114084/content.htm.
    (You initialize the Airline demo data with SE38>>SAPBC_DATA_GENERATOR first.)
    The demo is based on transaction EC_TUTORIAL_SAPGUI.
    Start transaction EC_TUTORIAL_SAPGUI
    Open an airline and flight
    Right click on a date and select New Booking
    Pick a customer from F4 list
    Select Passengers tab
    Enter a last name, title and date of birth.
    I have created the script, system and test data containers and test configuration. Everything runs great.
    Now I want to modify it a little so I can add multiple passengers into one flight booking request.
    I have read Sapna Modi & Rakesh Kumar Jain's excellent blogs and have been able to start using eCATT productively with their help. Also from reading all the SDN posts I think I need the DO...ENDDO loop. (I would like to do it without inline ABAP mainly because I don't know ABAP at all and we will want to do similar things in the future with other non-ABAP'ers.)
    Here is my test script ZTUTORIAL_TS_LOOP:
    SAPGUI ( EC_TUTORIAL_SAPGUI_100_1 ).
    SAPGUI ( EC_TUTORIAL_SAPGUI_120_1 ).
    GETGUI ( EC_TUTORIAL_SAPGUI_100_4 ).
    Switch to Passengers tab. Cursor in Class field.
    SAPGUI ( EC_TUTORIAL_SAPGUI_100_STE_1 ).
    Delete first row so I start with empty table.
    SAPGUI ( EC_TUTORIAL_SAPGUI_100_STE_2 ).
    This is where I am stuck. I don't know how to add as many rows as there are variants (records) in my test data containter.
    The way it is below, it inserts the same record twice and the whole script repeats for each record in the TDC.
    DO ( 2 ).
    Insert row and type passenger name, title, DOB.
    SAPGUI ( EC_TUTORIAL_SAPGUI_100_STE_3 ).
    ENDDO.
    Save.
    SAPGUI ( EC_TUTORIAL_SAPGUI_100_STE_4 ).
    Confirm pop-up.
    SAPGUI ( EC_TUTORIAL_SAPGUI_110_STE_1 ).
    Show message in status bar.
    SAPGUI ( EC_TUTORIAL_SAPGUI_100_STE_5 ).
    I know I have to pass the DO a parameter and somehow get that into the command and use that to loop through the test data container, I just haven't been able to put the pieces together. Can anybody help? Thank you,
    David

    Dear David,Vinay and Sebastian,
    I have an issue....I am new to ECATT.
    iam Using SECATT Transaction.
    I need 2 record PFCG to Create Role and assign Multiple Transactions.
    Now I have Gone through th eBlogs of Sapna and many other links.
    Firstly I have Tried Both the Methods,
    TCD and GUI as well.
    My Case is as Follows....
    1)while Creating Role in PFCG(Recording).
    I give
             a)Role Name
             b)Description Then Navigate to Menu Tab
             c)Click on  Transaction Button
             d)now this is where the Problem Arises.
    I  first    Enter VA01 and press enter
       Then  Enter Va02 and Press enter
    Similarly I make Multiple Entries.
    After that I Click on Assign Transaction and then Save my Recording and then go back.
    Now I am Done with my recording.
    Now issue is after creating my Test Script...When i Create the Test Configuration.
    I provide the Test Script Name and Download the Template.
    Now after Creating Template I give Entries as follows in tab Delimit Format.
    I modified my File as follows.
    [VARIANT]                          [DESCRIPTION]     V_ROLE_NAME     V_DESC     V_TCODE
                                          BDC field value     BDC field value     BDC field value
    *ECATTDEFAULT                           X104     A1     VL03N
    1          ROLE1     A1     SE37
    2          ROLE1     A1     SE38
    3          ROLE1     A1     SE51
    Problems:-
    1)Whenever I Execute The Recording it Shows Previous Entry which i made during Recording and says that the Role already Exists
    2)while recording in Foreground Teh File Picks ROLE1 then picks the Desc  A1 then when it Picks the Transaction  se37.
    now when it Goes to second line it Shows the Previous Entry I JUST ENTERED.i.e SE37 and says that Tcode laready Exists.
    How do i Clear this previus variables.
    2ndly if i Program My Code and dont Use External Vaiant.
    I made the File as Below as Text Delimit and This Time iam not using The Template.
    But when i Execute it It Gives Error.
    Is there any Problem with My File..Please Suggest.
    It has been 3 Days and iam Still Stuck at this issue.
    ROLE2     DES1     MB5B
    ROLE2     DES2     ME23N        
    Please Respond.
    Thanks Awaiting.
    Essam

  • Uploading multiple lines in a table control using ECATT

    Hi,
    I want to upload muliple lines in a table control using ECATT. When I tried to upload only the first line is getting filled.What I have to do for that. Please reply at the earliest.
    With warm regards,
    Biju K.George

    Hello ,
    To insert multiple lines into the table you have to record the transaction for one entry and loop the same step multiple times to create multiple entries in the table.
    Thanks,
    Ajay

  • URGENT: Multiple line items in delivery document created for a STO

    Hi Gurus,
    We ar ecreating deliveries using VL10b for a STO. Teh TSO has 40 - 50 line items. But the delivery is created with one line item only an dit creates a delivery for each line item. How cna we allow the inclusion of multiple line items in delivery?
    We are using delivery type NL an ditem categor is NLN.
    Geratly appreciate any help in that.
    Thanks,
    KHAN

    Hi Gianpaolo,
    Thanks for your suggestion I have 5 shedule line itmes for one material and two shedule line for another material and when i changed the material by selecting one line for each sales document no and creates the delivery it is howing three line itmes for the 1st material and line items for the second and quantities equal to the changed quantity in VL02N. and I have value "1" in field "Split per sched.line" in "user role" view of VL10E.
    Kindly help.
    Thanks and Regards
    Tanweer

  • Secatt Recording Multiple line items

    Hi all,
    Iam new to secatt.
    Iam having couple of doubts:
    1) We having the scenerios :Creating  script for Purchase,Order. P.O had multiple line item's.I want to creat the script for P.O ,that should work for all line items,each line items had deliery schedule date's
    (The scripts should work for Multiple line items and schedule dates )
    2) How to link the transactions
    ( Eg: In one scripts : creating P.O > Gr Migo > invoice )
    Is it possible?.If its possible pls guide me.I would appriciate, If any input.
    Regards,
    Hareesha k

    Hi Hareesha,
        I don't have any document particularly to this but you can refer to SAP standard eCATT documentation on http://help.sap.com/saphelp_erp2004/helpdata/en/1b/e81c3b84e65e7be10000000a11402f/frameset.htm.
    In case of any specific doubts you can write to me. I am also working on eCATTs.
    Best regards,
    Deepthi

  • How do i add multiple lines in a cell (like a list) in Excel for MAC?

    I'm trying to add multiple lines (in the form of a list) in a individual cell in Excel for MAC.  I used ALT Enter on my PC but that doesn't work on the iMac.  Does anyone know how to do this?
    Thanks!

    It's been a while but I think you hold SHIFT while typing a page break (RETURN) to make a new line without shifting to another cell.
    However, as Excel isn't an Apple product, I am sure you will get a faster and more current answer by using Microsoft's Office:Mac forums here:
    Office for Mac forums
    They are very good.

  • Setting the value of a single attribute for multiple line items

    Hi all,
    I am working on a Web Dynpro application, I have created this applicaion for an accounting document so it has header data and multiple line item data. As per the requirement I have to put the following logic:
    1. When a user enters a value in the field KBLNR on the line item, all the other fields like cost centerm fund, functional area should populate from a database table based on the value of the KBLNR. to get this I have put the following code:
    TYPES: BEGIN OF t_kblp,
              fipos     TYPE kblp-fipos,
              kostl     TYPE kostl,
                      END OF t_kblp.
      DATA lv_kblnr TYPE wd_this->element_t_bseg-kblnr.
      DATA: lt_kblp TYPE STANDARD TABLE OF t_kblp,
            wa_kblp LIKE LINE OF lt_kblp,
            lt_bseg              TYPE STANDARD TABLE OF bseg,
            wa_bseg              TYPE bseg.
      DATA lo_nd_t_bseg TYPE REF TO if_wd_context_node.
      DATA lo_el_t_bseg TYPE REF TO if_wd_context_element.
      DATA: ls_t_bseg TYPE wd_this->element_t_bseg,
            lo_api_controller    TYPE REF TO if_wd_controller,
            lo_message_manager   TYPE REF TO if_wd_message_manager,
            lo_nd_tbseg          TYPE REF TO if_wd_context_node,
             lo_el_tbseg          TYPE REF TO if_wd_context_element,
             lt_el_tbseg          TYPE wdr_context_element_set,
             lv_bseg              TYPE bseg.
      lo_nd_t_bseg = wd_context->path_get_node( path = `ZDATA.CHANGING.T_BSEG` ).
      lo_api_controller ?= wd_this->wd_get_api( ).
      CALL METHOD lo_api_controller->get_message_manager
        RECEIVING
          message_manager = lo_message_manager.
      lo_nd_tbseg = wd_context->path_get_node( path = `ZDATA.CHANGING.T_BSEG` ).
      lt_el_tbseg = lo_nd_tbseg->get_elements( ).
      LOOP AT lt_el_tbseg INTO lo_el_tbseg.
        lo_el_tbseg->get_static_attributes(
                               IMPORTING static_attributes = lv_bseg ).
      IF lv_bseg-kblnr NE ' '.
          SELECT belnr
                 fipos
                 kostl
                 PSPNR
                 geber
                 saknr
                 fkber
                 grant_nbr
                 gsber
                 FROM kblp
                 inTO corresponding fields of wa_kblp
                 WHERE belnr = lv_bseg-kblnr and
                      saknr = lv_bseg-saknr.
            ENDSELECT.
    lo_nd_t_bseg = wd_context->path_get_node( path = `ZPRELIMINARY_POSTING.CHANGING.T_BSEG` ).
    * get element via lead selection
            lo_el_t_bseg = lo_nd_t_bseg->get_element( ).
    lo_el_tbseg->set_static_attributes(
                               EXPORTING static_attributes = wa_kblp ).
       CLEAR: lv_bseg, wa_kblp.
      ENDLOOP.
    everything is working fine but now the problem is couple of fields that I have in wa_kblp are with different names in bseg table and hence they are not updating... I tried putting the following logic within the loop :
    lo_el_t_bseg->set_attribute(
        name =  `PROJK`
    value = wa_kblp-pspnr ).
    but it's only setting the value of the first line item and not working for the multiple line items, can you please tell me how can do this?
    Thanks,
    Rajat Garg
    Edited by: rajatg on Jun 24, 2011 5:09 PM

    Hi Chris,
    I tried your code and it worked fine but after I put this code I am getting another issue. within the loop I had a code to make the fields non modifiable on the screen and was working fine but now what's happening is it's making the all the lines uneditable except the one with data on it (which is completely opposite), this is what I have coded:
    LOOP AT lt_el_tbseg INTO lo_el_tbseg.
        lo_el_tbseg->get_static_attributes(
                               IMPORTING static_attributes = lv_bseg ).
    IF lv_bseg-kblnr NE ' '.
      SELECT belnr
                 fipos
                 kostl
                 PSPNR
                 geber
                 saknr
                 fkber
                 grant_nbr
                 gsber
                 FROM kblp
                 inTO corresponding fields of wa_kblp
                 WHERE belnr = lv_bseg-kblnr and
                      saknr = lv_bseg-saknr.
            ENDSELECT.
    move: wa_kblp-belnr to wa_bseg-kblnr,
    wa_kblp-fipos to wa_bseg-fipos,
    wa_kblp-kostl to wa_bseg-kostl,
    wa_kblp-pspnr to wa_bseg-projk,
    wa_kblp-geber to wa_bseg-geber,
    wa_kblp-saknr to wa_bseg-saknr,
    wa_kblp-fkber to wa_bseg-fkber,
    wa_kblp-grant_nbr to wa_bseg-grant_nbr,
    wa_kblp-gsber to wa_bseg-gsber,
    lv_bseg-dmbtr to wa_bseg-dmbtr.
    append wa_bseg to lt_bseg.
    lo_nd_edit_property = wd_context->path_get_node( path = `ZPRELIMINARY_POSTING.CHANGING.T_BSEG.EDIT_PROPERTY` ).
          get element via lead selection
          lo_el_edit_property = lo_nd_edit_property->get_element( ).
          lo_el_edit_property->set_attribute(
            name =  `EDIT_FIELD`
            value = 'ABAP_TRUE' ).
          lo_el_edit_property->set_attribute(
            name =  `EDIT_WBS`
            value = 'ABAP_TRUE' ).
    endif.
    endloop.
    o_nd_t_bseg = wd_context->path_get_node( path = `ZPRELIMINARY_POSTING.CHANGING.T_BSEG` ).
    get element via lead selection
            lo_el_t_bseg = lo_nd_t_bseg->get_element( ).
      CALL METHOD lo_nd_t_bseg->bind_table
        EXPORTING
          new_items            = lt_bseg.
    Can you please see what I am doing it wrong here....

  • Not able to generate multiple lines for headers in report

    Hi,
    I am new to BI publisher and not able to generate multiple lines for headers. Please help me to resolve.
    I am using RTF template, data source as PS Query and XML file (system generated from the data source)
    When I am using system generated 'First XML' file, I am getting output in the follwoing format.
    TEAM_MEMBER, PROJECT_ID, NAME, START_DT
    e.g.
    EMP1 , 71000, Sample, 01-Jan-2010
    EMP1 , 72000, Sample, 01-Feb-2010
    EMP1 , 73000, Sample, 01-March-2010
    But I want the report to be generate with multiple projects for one employee like below format , for that I used 'Second XML' file but I am getting blank report.
    In short if there is one to many case, how to show in reports??? Please correct if I am going wrong.
    TEAM_MEMBER
    PROJECT_ID, NAME, START_DT
    PROJECT_ID, NAME, START_DT
    PROJECT_ID, NAME, START_DT
    e.g.
    EMP1
    71000, Sample, 01-Jan-2010
    72000, Sample, 01-Feb-2010
    73000, Sample, 01-March-2010
    **********First XML**************System generated XML ****************************
    <?xml version="1.0"?>
    <query numrows="2" queryname="SY_EMP_PROJECT" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="">
    <row rownumber="1">
    <TEAM_MEMBER>TEAM_MEMBER </TEAM_MEMBER>
    <PROJECT_ID>PROJECT_ID samp</PROJECT_ID>
    <NAME>NAME sample data</NAME>
    <START_DT>2010-08-25</START_DT>
    </row>
    <row rownumber="2">
    <TEAM_MEMBER>TEAM_MEMBER</TEAM_MEMBER>
    <PROJECT_ID>PROJECT_ID samp</PROJECT_ID>
    <NAME>NAME sample data</NAME>
    <START_DT>2010-08-25</START_DT>
    </row>
    </query>
    **********Second XML**************Manually created XML and using to show multiple projects for one employee****************
    <?xml version="1.0"?>
    <TEST numrows="2" queryname="SY_EMP_PROJECT" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="">
    <TEAM_MEMBER rownumber="1">
    <TEAM_MEMBER>1</TEAM_MEMBER>
    <EMPLOYEE_NAME>SAMPLE</EMPLOYEE_NAME>
    <PROJECT>
    <PROJECT_ID>1111</PROJECT_ID>
         <PROJECT_DESCR>SAMPLE</PROJECT_DESCR>
    <START_DATE>01012010</START_DATE>
    </PROJECT>
    <PROJECT>
    <PROJECT_ID>1112</PROJECT_ID>
         <PROJECT_DESCR>SAMPLE</PROJECT_DESCR>
    <START_DATE>01022010</START_DATE>
    </PROJECT>
    </TEAM_MEMBER>
    <TEAM_MEMBER rownumber="2">
    <TEAM_MEMBER>2</TEAM_MEMBER>
    <EMPLOYEE_NAME>SAMPLEC</EMPLOYEE_NAME>
    <PROJECT>
    <PROJECT_ID>1111</PROJECT_ID>
         <PROJECT_DESCR>SAMPLE</PROJECT_DESCR>
    <START_DATE>01012010</START_DATE>
    </PROJECT>
    <PROJECT>
    <PROJECT_ID>1112</PROJECT_ID>
         <PROJECT_DESCR>SAMPLE</PROJECT_DESCR>
    <START_DATE>01022010</START_DATE>
    </PROJECT>
    </TEAM_MEMBER>
    </TEST>
    Edited by: ganeshtw on Aug 25, 2010 12:14 AM

    Hi,
    With your first xml you can print like
    EMP1
    71000, Sample, 01-Jan-2010
    72000, Sample, 01-Feb-2010
    73000, Sample, 01-March-2010While creating the RTF template you can use the Group by option.
    <?for-each-group:ROW;./columnname> then print the column name
    <?columnname?>
    --Then your table format
    71000, Sample, 01-Jan-2010
    72000, Sample, 01-Feb-2010
    73000, Sample, 01-March-2010
    <?end for-each-group?>
    Thanks.

  • Production order from sales order with multiple line item(for one material)

    Dear Gurus,
    I am working in MTO scenarios. If there is several line item in a sales order for one material, multiple production order( same as no. of sales order line item) is getting created against each of the line item.My requirement is,since the material code is same in each line item and sales order is one, one production order should be generated for all line item. please tell me how to do it.
    (Here for one material, multiple line item is required for some specific reason)
    Regards
    Rajib Pathak

    Hi,
    This is not possible.
    In Std SAP will create one production order for one sales order. The stock is also allocated to thet particular sales order only. Because each and every sales order may vary in any one of the parameters. Considering this, SAP has designed like this.
    Regards,
    V. Suresh

  • How to Update multiple line Items in Sales order Interactive form

    Hi,
            I have created one online interactive form for sales order. In that I incorporated dynamic table logic .i.e. we can add row and delete row using buttons. Interactive form is working fine with one line item. But if I give multiple lines in table (line item) its creating sales order with single line item. So please help me how to pass multiple lines.
    Thanks & Regards,
    Krishna.

    Hi,
    Check out this link, this deals with the problem you are facing.
    http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/802f0ed1-a17a-2c10-7db4-d515a5b047ed
    Regards,
    Runal

  • How to select multiple lines in ALV report

    hi gurus,
    I am working on an interactive ALV report where i have to select multiple lines from the basic list into an internal table, based on check box clicks. Using RS_SELFIELD i can select only 1 row. The coding has been done based on Call Function. Can u please suggest some way.
    Regards,
    Satyajit

    hi,
    try like this
    TABLES:     ekko.
    TYPE-POOLS: slis.                                 "ALV Declarations
    TYPES: BEGIN OF t_ekko,
      sel,                         "stores which row user has selected
      ebeln TYPE ekpo-ebeln,
      ebelp TYPE ekpo-ebelp,
      statu TYPE ekpo-statu,
      aedat TYPE ekpo-aedat,
      matnr TYPE ekpo-matnr,
      menge TYPE ekpo-menge,
      meins TYPE ekpo-meins,
      netpr TYPE ekpo-netpr,
      peinh TYPE ekpo-peinh,
    END OF t_ekko.
    DATA: it_ekko TYPE STANDARD TABLE OF t_ekko INITIAL SIZE 0,
          wa_ekko TYPE t_ekko.
    DATA: fieldcatalog TYPE slis_t_fieldcat_alv WITH HEADER LINE,
          fieldcatalog1 TYPE slis_t_fieldcat_alv WITH HEADER LINE,
          gd_tab_group TYPE slis_t_sp_group_alv,
          gd_layout    TYPE slis_layout_alv,
          gd_repid     LIKE sy-repid.
    DATA : BEGIN OF det_tab OCCURS 0,
            ebeln LIKE ekpo-ebeln,
           END OF det_tab.
    START-OF-SELECTION.
      PERFORM data_retrieval.
      PERFORM build_fieldcatalog.
      PERFORM build_layout.
      PERFORM display_alv_report.
    *&      Form  BUILD_FIELDCATALOG
    *       Build Fieldcatalog for ALV Report
    FORM build_fieldcatalog.
      fieldcatalog-fieldname   = 'EBELN'.
      fieldcatalog-seltext_m   = 'Purchase Order'.
      fieldcatalog-outputlen   = 10.
      fieldcatalog-emphasize   = 'X'.
      fieldcatalog-key         = 'X'.
      APPEND fieldcatalog TO fieldcatalog.
      CLEAR  fieldcatalog.
      fieldcatalog-fieldname   = 'EBELP'.
      fieldcatalog-seltext_m   = 'PO Item'.
      APPEND fieldcatalog TO fieldcatalog.
      CLEAR  fieldcatalog.
      fieldcatalog-fieldname   = 'STATU'.
      fieldcatalog-seltext_m   = 'Status'.
      APPEND fieldcatalog TO fieldcatalog.
      CLEAR  fieldcatalog.
      fieldcatalog-fieldname   = 'AEDAT'.
      fieldcatalog-seltext_m   = 'Item change date'.
      APPEND fieldcatalog TO fieldcatalog.
      CLEAR  fieldcatalog.
      fieldcatalog-fieldname   = 'MATNR'.
      fieldcatalog-seltext_m   = 'Material Number'.
      APPEND fieldcatalog TO fieldcatalog.
      CLEAR  fieldcatalog.
      fieldcatalog-fieldname   = 'MENGE'.
      fieldcatalog-seltext_m   = 'PO quantity'.
      APPEND fieldcatalog TO fieldcatalog.
      CLEAR  fieldcatalog.
      fieldcatalog-fieldname   = 'MEINS'.
      fieldcatalog-seltext_m   = 'Order Unit'.
      APPEND fieldcatalog TO fieldcatalog.
      CLEAR  fieldcatalog.
      fieldcatalog-fieldname   = 'NETPR'.
      fieldcatalog-seltext_m   = 'Net Price'.
      fieldcatalog-outputlen   = 15.
      fieldcatalog-do_sum      = 'X'.        "Display column total
      fieldcatalog-datatype     = 'CURR'.
      APPEND fieldcatalog TO fieldcatalog.
      CLEAR  fieldcatalog.
      fieldcatalog-fieldname   = 'PEINH'.
      fieldcatalog-seltext_m   = 'Price Unit'.
      APPEND fieldcatalog TO fieldcatalog.
      CLEAR  fieldcatalog.
    ENDFORM.                    " BUILD_FIELDCATALOG
    *&      Form  BUILD_LAYOUT
    *       Build layout for ALV grid report
    FORM build_layout.
      gd_layout-box_fieldname     = 'SEL'.
      "set field name to store row selection
      gd_layout-edit              = 'X'. "makes whole ALV table editable
      gd_layout-zebra             = 'X'.
    ENDFORM.                    " BUILD_LAYOUT
    *&      Form  DISPLAY_ALV_REPORT
    *       Display report using ALV grid
    FORM display_alv_report.
      gd_repid = sy-repid.
      CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
        EXPORTING
          i_callback_program       = gd_repid
          i_callback_user_command  = 'USER_COMMAND'
          i_callback_pf_status_set = 'SET_STAT'
          is_layout                = gd_layout
          it_fieldcat              = fieldcatalog[]
          i_save                   = 'X'
        TABLES
          t_outtab                 = it_ekko
        EXCEPTIONS
          program_error            = 1
          OTHERS                   = 2.
      IF sy-subrc <> 0.
    * MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
    *         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
      ENDIF.
    ENDFORM.                    " DISPLAY_ALV_REPORT
    *&      Form  DATA_RETRIEVAL
    *       Retrieve data form EKPO table and populate itab it_ekko
    FORM data_retrieval.
      SELECT ebeln ebelp statu aedat matnr menge meins netpr peinh
       UP TO 10 ROWS
        FROM ekpo
        INTO CORRESPONDING FIELDS OF TABLE it_ekko.
    ENDFORM.                    " DATA_RETRIEVAL
    *       FORM USER_COMMAND                                          *
    *       --> R_UCOMM                                                *
    *       --> RS_SELFIELD                                            *
    FORM user_command USING r_ucomm LIKE sy-ucomm
                      rs_selfield TYPE slis_selfield.
    * Check function code
      CASE r_ucomm.
        WHEN '&IC1'.
          IF rs_selfield-fieldname = 'EBELN'.
            READ TABLE it_ekko INTO wa_ekko INDEX rs_selfield-tabindex.
            SET PARAMETER ID 'BES' FIELD wa_ekko-ebeln.
            CALL TRANSACTION 'ME23N' AND SKIP FIRST SCREEN.
          ENDIF.
        WHEN 'DET'.  "button add by me
          CLEAR det_tab.
          REFRESH det_tab.
          LOOP AT it_ekko INTO wa_ekko WHERE sel = 'X'.
            MOVE-CORRESPONDING wa_ekko TO det_tab.
            APPEND det_tab.
          ENDLOOP.
          PERFORM build_cat.
          PERFORM dis_data.
      ENDCASE.
    ENDFORM.                    "user_command
    *&      Form  set_stat
    *       text
    *      -->RT_EXTAB   text
    FORM set_stat USING rt_extab TYPE slis_t_extab.
      SET PF-STATUS 'ZSTAT' EXCLUDING rt_extab.
    ENDFORM.                    "set_stat
    *&      Form  build_cat
    *       text
    FORM build_cat.
      CLEAR fieldcatalog1.
      REFRESH fieldcatalog1.
      fieldcatalog1-fieldname = 'EBELN'.
      fieldcatalog1-tabname = 'DET_TAB'.
      fieldcatalog1-seltext_m = 'Order No.'.
      fieldcatalog1-outputlen = 10.
      APPEND fieldcatalog1 TO fieldcatalog1.
      CLEAR fieldcatalog1.
    ENDFORM.                    "build_cat
    *&      Form  dis_data
    *       text
    FORM dis_data.
      CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
        EXPORTING
          i_callback_program = 'ZTEST_DS'
          it_fieldcat        = fieldcatalog1[]
          i_save             = 'X'
        TABLES
          t_outtab           = det_tab.
    ENDFORM.                    "dis_data
    here i have copied standard gui status of ALV into my z status ZSTAT and add one button DET......
    here u can select morethan one line using control(ctrl)
    reward if usefull...

  • Crystal report -How to display multiple lines in line chart?

    Hi,
    M struggling to display multiple lines in line chart. All the values m fetching it from database into data table in below format & data type
    Category(String).....year(Int).....graph_values(Int).....table_value(String)
    Test.........................2006.......... -100............................(100)
    Avg..........................2006..........20................................20
    Median......................2006...........5................................5
    Test..........................2007...........500.............................500
    Avg...........................2007............90..............................90
    Median.......................2007............45..............................45
    M using cross tab to display data and chart to plot line. Following fields I used in Cross tab Expert & Chart expert
    Cross tab expert-
    Rows u2013 category
    Columns u2013 year
    Summarized fields u2013 Min of table_value
    In Chart Expert u2013
    On Change of - Year
    Show values - graph values
    In cross tab m able to see the data properly but not in graph.I have three categories. Hence it should plot three lines in line chart but m able to see only one line for test category.
    FYI u2013 using VS 2008 and crystal report assembly version 10.5
    Urgent. Please reply soon.
    Thanks
    ThakurS

    I got the solution.
    In Chart Expert - I should use
    On Change of -- Year, Category
    Show values -- graph values
    Thanks,
    ThakurS

  • Multiple lines for field description in ALV

    Hi ,
    Is there any way to display the field description in  multiple lines in ALV grid .
    Regards,
    Pradipta

    Hi pradipta,
    1. No its not possible.
    2. At the most, we can set the WIDTH of the
       column, to ACCOMODATE the field description.
    3. We cannot do WRAP as u require.
    regards,
    amit m.

Maybe you are looking for