Ecc 6.0 Abap Dictionary error in SCCL

I am coping client from 000 into newly created client in my new ECC 6.0
environment.I am taking SAP_ALL as my client copy profile.
BUt in my client copy it is giving me "dictionary error" for more then
100 tables. Can you please explain me that.I am able to execute ME21 or
ME51n in my 000 and 001 but it is giving me "Table not configure" error
in newly copied client.
From my analysis of the source and target clients it would appear that
the client copy completed successfully.
On both the source and target you will see the entries are identical.
check on both the database object and the run-time object. The
same problems exist on each client. If there is an error/problem in
the source client, this is going to be copied over to the target client
You need to rectify these problems in the source client before copying
over to the target client.
If we check SE14
SE14 > Obj. name: A001 > click the 'Edit' button > Extras >
> Database object > Check
Table is not created in the database
Runtime Object is Consistent
Those warnings refers to several tables, and the message for all of
them is "DDIC Error (See SE14)". It means that all those tables are not
consistent, or do not exits at database level. Therefore, that problem
affect not only to the target client 100, but also to client 000.
What i think is
Problm is with support patches... as i have same system which is D11
(DEV) without any patches, and i did client copy in that. everything
went good. no dictionary error.

Hello Nish,
Have you done SGEN already?
Anyways first try this out Check through SE11 if the tables exist in the new client. For example check for A001. If it shows up there try to activate the table and see if you get any errors. Let us know the results.
Regards.
Ruchit.

Similar Messages

Error in CHECK_REQUIREMENTS phase (Open ABAP Dictionary Conversions)

Hi Gurus,
When were are trying to update SPAM/SAINT to version 7.00/0033 from 7.00/0029
we're encountering 'Open Conversions in the ABAP Dictionary' in CHECK_REQUIREMENTS phase, refraining to proceed further.
It was due to 2 indexes in a table.
When i checked(using SE14), those two indexes were not appearing in dictionary, hence we've removed them at the ORACLE level, reset the queue and tried to update again, and got the same error .
Table PAT03 - has the following
Patch - 'SAPKD70033'
Status - '?'
and the table PAT02 has 2 enties of those two indexes.
with Patch - 'OPEN_TBATG'
How to proceed further,pls provide us a solution.
Regards
Prabumanoharan

Hai,
Goto SE14 - select "Indexes" and "Activate". But you should have tried this before deleting the Indexes from the Oracle level.
or try restarting the update.
Regards,
Yoganand.V

ECC 6.0 Import ABAP phase error

Hi,
I am facing the same problem as mentioned below thread with x64 bit 2003 windows on my p4 desktop machine with 2 gb RAM.
ECC 6.0 SR2 Import ABAP phase error
Pl. suggest does the it works on my P4 machine , x64 bit windows 2k3 is working fine on desktop .
means my desktop is supporting 64 bit version . is it ?
or I have to use true IA64 Bit itenium based machine ?
SQL> shutdown
ORA-01034: ORACLE not available
ORA-27101: shared memory realm does not exist .
I have followed the thread , which is mentioned above .
Thanks in advance .
Edited by: sonal saxena on Feb 23, 2009 8:04 AM

Sonal,
Refer to following link and hope it solves your problem.
[http://www.dbmotive.com/oracle_error_codes.php?errcode=27101]
Manoj Chintawar

DDNTF_CONV_UC~" does not exist in the ABAP Dictionary

Hello Experts ,
We are migrating our ECC system from Oracle to HANA DB using DMO - during Post Processing phase we are getting the following error :
(screenshot attached)
4 ETG003 Table "DDNTF_CONV_UC~" does not exist in the ABAP Dictionary
4 ETG003 Table "DDNTF~" does not exist in the ABAP Dictionary
4 ETG003 Table "DDNTT_CONV_UC~" does not exist in the ABAP Dictionary
4 ETG003 Table "DDNTT~" does not exist in the ABAP Dictionary\
1. Am not sure why Shadow tables are considered in this phase ?
2. What steps i can follow to fix this error ?[I tried activating those using se14 but activation button is disabled].
3. I have a option to ignore and move forward but am not sure about the side affects ?
Source ECC6 Ehp5 702 on Oracle.
Target ECC6 Ehp7 740 on HANA.
SUM SP12 PL02
Thanks
Dev

Hi Avinash,
two comments on this:
This is not an issue, as this text is NOT an error message.
(An error message lists the "E" as second character,
but the screenshot above shows a space as second character.)
The log handling for this phase will be adapted in SUM SP13, so that non-errors are not listed at this point, to avoid this confusion.
SUM 1.0 SP12 PL 1 to PL 3 must not be used any longer, see SAP Note 2122247.
Regards, Boris

A standard table is missing in ABAP dictionary

We wane to use a standard program which uses a standard table(CCEE/FISISTGRD) .
but when trying to execute this pgm , itrs going into dump..
The error is CCEE/FISISTGRD doesnot exist in ABAP dictionary
Edited by: deepti Gandham on Apr 24, 2009 9:58 AM

Hi,
deepti Gandham,
I check with ECC 6.0 ,but your standard Table not there
List of the table,
/CCEE/FISI_DDVN    Slovenia VAT open period
/CCEE/FISI_SET       Seting for print programs
/CCEE/FISIFP_A       Forign Payments - account connection
/CCEE/FISIFP_B       Forign Payments in/out
/CCEE/FISIFP_C       Bank list
/CCEE/FISIFP_HAL   Podatki za HALCOM
/CCEE/FISIKOEF1    Coefficients for revaluation
/CCEE/FISIMT940     Bank statement - MT 940 - convert referenc
/CCEE/FISIOBR1      Povezava kupca z letno obr. mero za izraèu
/CCEE/FISISTGRD   Reasons for Reversal enabling to change ta
/CCEE/FISITAX        Convert Tax on sales
/CCEE/FISIZDV
Regards,
Ansari.

ABAP runtime error while doing ME21N, ME22N, ME23N, ME51N,ME52N, ME53N

Dear All Expert,
I am facing problem while doing ME21N, ME22N, ME23N, ME51N,ME52N, ME53N,
Please find the below ABAP Runtime Error.
Runtime Errors         LOAD_TYPE_VERSION_MISMATCH
Date and Time          10.02.2011 11:13:07
Short text
     Change of a Dictionary structure at runtime of a program.
What happened?
     Runtime error
     The current ABAP program "CL_IM_WRF_MM_PROC_PO==========CP" had to be
      terminated because one
     of the statements could not be executed at runtime.
What can you do?
     Restart the program.
     If the error persists, contact your SAP administrator.
     You can use the ABAP dump analysis transaction ST22 to view and manage
     termination messages, in particular for long term reference.
Error analysis
     The ABAP runtime system detected that the Dictionary-type "WRF_POHF_KOMP_STY"
      changed
     during the flow of the transaction.
     As the type was already used in the old version
     and in the new type should be used in the same transaction in the new
      version, the transaction had to be cancelled to avoid inconsistencies.
How to correct the error
    Try to restart the program.
System environment
    SAP-Release 700
    Application server... "iqe"
    Network address...... "172.25.0.85"
    Operating system..... "Linux"
    Release.............. "2.6.9-55.ELsmp"
    Hardware type........ "x86_64"
    Character length.... 16 Bits
    Pointer length....... 64 Bits
    Work process number.. 0
    Shortdump setting.... "full"
    Database server... "iqe"
    Database type..... "ORACLE"
    Database name..... "IQE"
    Database user ID.. "SAPSR3"
    Terminal................. "MUMJML5727"
    Char.set.... "C"
    SAP kernel....... 700
    created (date)... "Dec 26 2010 20:17:07"
    create on........ "Linux GNU SLES-9 x86_64 cc3.3.3"
    Database version. "OCI_102 (10.2.0.2.0) "
Patch level. 285
Patch text.. " "
Database............. "ORACLE 10.1.0.., ORACLE 10.2.0.., ORACLE 11.2...*"
SAP database version. 700
Operating system..... "Linux 2.6"
Memory consumption
Roll.... 16192
EM...... 25139088
Heap.... 0
Page.... 40960
MM Used. 8038136
MM Free. 4528408
User and Transaction
Client.............. 600
User................ "JKMM"
Language key........ "E"
Transaction......... " "
Transactions ID..... "4D524AD1FD7A42F9E1000000AC190055"
Program............. "CL_IM_WRF_MM_PROC_PO==========CP"
Screen.............. " "
Screen line......... " "
Information on where terminated
    The termination occurred during generation of the ABAP/4 program
     "CL_IM_WRF_MM_PROC_PO==========CP".
    The termination occurred in line 213
    of the source code of program "CL_IM_WRF_MM_PROC_PO==========CM007" (when
     calling the editor 2130).
Source Code Extract
Line SourceCde
183   DATA: l_flag TYPE wrf_pbas_boolean.
184
185   CALL FUNCTION 'WRF_POHF_MSG_READ_PREVIEW_FLAG'
186     IMPORTING
187       e_preview_flag = l_flag.
188
189   IF NOT l_flag IS INITIAL.
190
191     DATA: l_header TYPE REF TO cl_po_header_handle_mm.
192
193     MOVE im_header ?TO l_header.
194
195     CALL METHOD l_header->if_output_mm~preview( ).
196
197     CALL FUNCTION 'WRF_POHF_MSG_RESET_PREV_FLAG'.
198
199 ***$ Widening Cast for printing information.
200 **    CALL FUNCTION 'WRF_POHF_STORE_PRINT_INFO_SET'
201 **      EXPORTING
202 **        im_header = l_header.
203
204 * Printing Preview
205 * IF NOT gv_preview IS INITIAL.
206 *    CALL METHOD l_header->if_output_mm~overview( ).
207 *    CALL METHOD l_header->if_output_mm~preview( ).
208 * clear gv_preview.
209   ENDIF.
210
211 * ENDIF.
212
>>>>> ENDMETHOD.
Internal notes
    The termination was triggered in function "ab_RxDdicStruShareFailed"
    of the SAP kernel, in line 2539 of the module
     "//bas/700_REL/src/krn/runt/abtypload.c#11".
    The internal operation just processed is " ".
    Internal mode was started at 20110210111306.
    Name of the changed type......: "WRF_POHF_KOMP_STY"
    New version of the type.......: 20070508193207
    Old version of the type.......: 20070508193207
    New user......................: "Type" "WRF_POHF_KOMP_STY"
    Version of the new user.......: 20070508193207
    Old user......................: "???" "???"
    Version of the old user.......: "???"
Active Calls in SAP Kernel
Lines of C Stack in Kernel (Structure Differs on Each Platform)
(CTrcStack2+0x78)[0x6cbb78]
(CTrcStack+0xb)[0x6cc17b]
(ab_rabax+0x3be5)[0xb8d985]
(_Z24ab_RxDdicStruShareFailedPKtm4RUDIS0_S1_S0_+0x163)[0xb16823]
(_Z19ab_GetDdicTypeIndexPKtm4RUDI+0x1f6)[0xb0dbb6]
(_Z11ab_LoadViewPtjPKtPK11PROGRAMHEADPj+0x27e)[0xb16ede]
(_Z18ab_GetDdicTypeLoad4RUDI+0x6e)[0xb1705e]
(ab_GetView+0xc1d)[0xb0ee1d]
(_Z20CompressInitRcByDatajPK6CG_DIRjjS1_jj4RUDIPKhj+0x60d)[0xe32b2d]
(_Z21cg_CompressStackFrameP4TRIGjj+0x169)[0xe33399]
(_Z8cg_blkleP3ENV+0x75f)[0xe4779f]
(_Z9sc_cblklePKt8ENV_KINDP7SC_INFO+0x394)[0xe90024]
(sc_blkle+0xdd)[0xec6e4d]
(rs_oper_abap1729+0x37)[0x10eb237]
(rs_expan_abap+0xa1996)[0xfd7a2a]
(_Z8sc_expanj+0x76d)[0xe1d55d]
(_Z5parsejPi+0x258)[0xe19998]
(sc_check+0xb9c)[0xe1857c]
(sc_inclu+0x5fa)[0xe0d50a]
(rs_oper_abap2160+0x3a)[0x1115d6a]
(rs_expan_abap+0xcd41d)[0x10034b1]
(_Z8sc_expanj+0x76d)[0xe1d55d]
(_Z5parsejPi+0x258)[0xe19998]
(sc_check+0xb9c)[0xe1857c]
(sc_checkStart+0x41)[0xe1ac51]
(cg_generate+0xb65)[0xe57755]
(ab_gabap+0x14a)[0xb01a5a]
(dy_gen_abap+0x63c)[0x74428c]
(ab_genprog+0x13d3)[0xb03d13]
(_Z17ab_LoadProgOrTrfoPKtjPj+0xb56)[0x8f9ab6]
(_Z11ab_LoadProgPKtj+0x11)[0x8f9ca1]
(_Z15LoadGlobalClassPKtjjj9ClasState+0x24c)[0x958c2c]
(_Z11FillCfixIntPK4CREFP4CFIXjj9ClasState+0x214)[0x957404]
(_Z11ab_FillCfixtj+0x65)[0x957ae5]
(_Z26ab_CrefToCladId_ActivateOKtPh+0x7d)[0x957b6d]
(_Z8ab_jaboov+0x623)[0x959793]
(_Z8ab_extriv+0x607)[0x8ba9c7]
(_Z9ab_xeventPKt+0x1c1)[0xa1c021]
(_Z8ab_triggv+0x9c)[0xa1c77c]
(ab_run+0x97)[0xbde5c7]
(N_ab_run+0x9)[0x736359]
(dynpmcal+0x669)[0x7333b9]
(dynppai0+0x8eb)[0x734d9b]
(dynprctl+0x3e9)[0x733db9]
(dynpen00+0x4a5)[0x726eb5]
(Thdynpen00+0x359)[0x541bd9]
(TskhLoop+0xc49)[0x54d999]
(ThStart+0x20f)[0x55b29f]
(DpMain+0x2da)[0x4bd49a]
(nlsui_main+0x9)[0x4910c9]
(main+0x33)[0x491103]
/lib64/tls/libc.so.6(__libc_start_main+0xdb)[0x3cde51c3fb]
Please help me to resolve the issue.
Thanks & Regards
SKK

read this part again: The ABAP runtime system detected that the Dictionary-type "WRF_POHF_KOMP_STY" changed during the flow of the transaction. As the type was already used in the old version and in the new type should be used in the same transaction in the new version, the transaction had to be cancelled to avoid inconsistencies. How to correct the error Try to restart the program
how often had you restarted ME21N before you posted this message?
In best case this message appears only once, because the program / or dictionary was changed while you executed ME21N
If many times, then contact your ABAPer, because then he probably did not transport all objects that were changed, or the objects have to be regenerated in your system.

ZSD_TABLE is not defined in the ABAP dictionary as a table"

Hello,
I created zsd_table and inserted few records
When i use this table in program system is giving error message "ZSD_TABLE is not defined in the ABAP dictionary as a table"
How can we define this table in ABAP dictionary?
Thanks

Hi,
Go to Transaction SE11
Give the table name 'ZSD_TABLE'
and click on create and enter the fileds
after entering fields give 'techinical setting' for a table by clicking on technical setting button on tool bar
save check and activate
Regards
Krishna

Field in structure 'is not defined in the ABAP Dictionary'

Hi,
I have created an Infoset (SQ01) based on an external program and structure.
These two things are required.
However when I try to generate my Infoset I get an error message for each element in the structure I created in SE11.
The error is:
"<structure_name-field_name> is not defined in the ABAP Dictionary"
Each element in my structure gives this error yet I have defined this in SE11 as a structure and activated it.
These elements are included in my Infoset and as a field group in the infoset.
Has anyone come across this error before and knows how to resolve this problem?
Many Thanks
David

Hey,
I got the same prb.
Just reset the text buffers.
Rgds,
Martin

Maint. Status problem for View in ABAP Dictionary

Hello, guys. I have a problem with a configuration in my Maintainence View in the ABAP Dictionary.
I have a maintainence view in my abap dictionary, When i go to the tab "Maint. Status" there, and want to change the "Data Browser/Table View Maint." from "Display/Maintenance Allowed with Restrictions" to "Display/Maintenance Allowed", an error is occured. An error message is displayed, showed "The input field contains prohibited characters (already deleted)."
So, what should I do in order to change to "display/maintenance allowed with restrictions" status.
Hope anyone here can provide me a solution. Thanks in advance first. ^^

Check below SAP help
http://help.sap.com/saphelp_nw04/helpdata/en/38/81c1351181b73fe10000009b38f839/frameset.htm
events
http://help.sap.com/saphelp_nw04/helpdata/en/91/ca9f0ea9d111d1a5690000e82deaaa/frameset.htm
Regards,
Atish

Abap dictionary activation problem when transfer request dev to prod

hi experts
i develop enhancement in that i append structure in afru table.
when transfering requset dev to production there is error
abap dictionary activation .
thanks
ajay

hi
problem not solve.
see below error.
Activate table ZZAFRUD
   Field RPM: Component type or domain used not active or does not exist
   Nametab for table ZZAFRUD cannot be generated
   Table ZZAFRUD was not activated.
structure zzafrud is active but in error it shows not active.
i used domain zrpm it also active.
thanks
ajay.

Reg : Daily i got 120 ABAP Runtime Error with in 40 Mins(Early Morning)

Dear Friends,
I got following errors regularly. when i run t.code RSBTCDEL and RSSNAPDL. what can i do? then Regularly morning i got same morethan 120 Error. User is SAPSYS 000 Client. How can avoid this type of ABAP Runtime Error.
Runtime Errors         DBIF_RSQL_SQL_ERROR
Exception              CX_SY_OPEN_SQL_DB
Date and Time          10.06.2009 15:04:23
Short text
     SQL error in the database when accessing a table.
What can you do?
     Note which actions and input led to the error.
     For further help in handling the problem, contact your SAP administrator
     You can use the ABAP dump analysis transaction ST22 to view and manage
     termination messages, in particular for long term reference.
How to correct the error
     Database error text........: "[601] Could not continue scan with NOLOCK due to
      data movement."
     Internal call code.........: "[RSQL/FTCH/TBTCO ]"
     Please check the entries in the system log (Transaction SM21).
     If the error occures in a non-modified SAP program, you may be able to
     find an interim solution in an SAP Note.
     If you have access to SAP Notes, carry out a search with the following
     keywords:
     "DBIF_RSQL_SQL_ERROR" "CX_SY_OPEN_SQL_DB"
     "SAPLBTCH" or "LBTCHF19"
     "EXECUTE_BP_JOB_SELECT"
If you cannot solve the problem yourself and want to send an error notification to SAP, include the following information:
1. The description of the current problem (short dump)
   To save the description, choose "System u2192 List u2192 Save u2192 Local File u2192 (Unconverted)".
2. Corresponding system log
Display the system log by calling transaction SM21.   Restrict the time interval to 10 minutes before and five minutes after the short dump. Then choose "System->List->Save->Local File-(Unconverted)".
3. If the problem occurs in a problem of your own or a modified SAP program: The source code of the program   In the editor, choose "Utilities->More Utilities->Upload/Download->Download".
4. Details about the conditions under which the error occurred or which actions and input led to the error. The exception must either be prevented, caught within proedure
"EXECUTE_BP_JOB_SELECT" "(FORM)", or its possible occurrence must be declared
in the RAISING clause of the procedure. To prevent the exception, note the following:
Client.............. 400
User................ "BASIS"
Language key........ "E"
Transaction......... "SE38 "
Transactions ID..... "D7A155DEA42EF1EEB52A000423BF7C3A"
Program............. "SAPLBTCH"      ( Run a Sap Standard Report RSBTCDEL)
Screen.............. "SAPMSSY0 1000"
Regards
keshav

Hi Juan,
My System is
ECC 6.0
Database : MS SQL Server 2005
OS - Windows 2003 server
SAP Patches level is Basis - SAPKB70016
                               ABAP - SAPKA70016
                               Kernel patch level - 185
when i has update the kernel patches after only i got this error morethan 120 like early morning 4.40 AM to 5.18 AM regularly. what can i do?
Regards
keshav

ABAP Application Error in Proxy scenario

Hi All,
I have a Proxy to Proxy scenario. I can see that few message are successful, whereas few are failing in ECC side. The messages are not stuck in Queue. It is giving a "ABAP" _APPLICATION ERROR. Has anyone faced this error before?
Regards,
Lavanya R

Hi,
Issue with Application end, Ask to developer to deebug the codu using the failed xml message.
Regards
srinivas

Customise table inconsistency between ABAP Dictionary and the databas

Hi all,
I have encountered a problem where by, I was not able to activate a table due to inconsistency between ABAP Dictionary and the database.
After I run the SE14--> Check Database object. It has show that there is a missing Unique Index(Primary Index) at the Database Level, but at ABAP Dictionary it is there.
I have try to recreate the primary index at the Database level, but failed. Because one of the primary key field is been dropped from this table.
So now, may I know how can I still make this table Active again?
Is it save to folllow the following solution that I found on internet?
Syntax error in SDCC, table inconsistency between ABAP Dictionary and the database, transport error 8 during the generation of ABAP Dictionary. When you call Transaction SDCC, a termination occurs due to a putative syntax error because a table is not known or active. When you check this with the ABAP dictionary (SE11), you notice, that the table is active or inactive, however it is not possible to activate it. The activation might terminate with the error message 'Inconsistency between ABAP Dictionary and database'. A check of the affected object also delivers this error.
Solution
Proceed as follows:
Log on as user DDIC
Call Transaction SE14
Enter the affected table name and
select EDIT
In the following screen, choose Table -> Reconstruct
Confirm the execution
Call Transaction SE11
Enter the affected table name
Display
Activate
Thanks.
CK

I managed to solved this by
Solution
Proceed as follows:
Log on as user DDIC
Call Transaction SE14
Enter the affected table name and
select EDIT
In the following screen, choose Table -> Reconstruct
Confirm the execution
Call Transaction SE11
Enter the affected table name
Display
Activate
Thanks.
CK

IDES ERP 2005 / open ABAP dictionary conversion during SPAM Update

Dear all,
First of all, I'm currently busy implementing a educational enviroment for our company, we are using IDES MySAP ERP 2005 SR1 MSSQL.
At the moment we are trying to upgrade the SPAM version from version 20 to 22.
However, during the requirement checks the following error occurred :
<b>Open conversions in the data dictionary</b>
<i>Phase CHECK_REQUIREMENTS: Explanation of Errors
Some open conversion requests still exist in the ABAP Data Dictionary
for the following ABAP Dictionary objects. To avoid inconsistencies and
loss of data, you must process these conversions first.
Proceed as follows:
- Open a new session.
- Start the Database Utility (transaction SE14).
- Correct the inconsistencies for the specified objects.
- Repeat the import phase. If no more inconsistencies are found, the
import continues.
Phase CHECK_REQUIREMENTS: Open ABAP Dictionary Conversions
Object Type       Object Name
Table Index       LXE_WRK_4 ~ STA
                   SC2T327F363DFA4T ~ ESI
                   SC2T327F363DFA4T ~ KYS
</i>
It seems that the indexes mentioned above are missing or doesn't exist!!!! i've tried looking for a sap note or a solution on SDN. However, haven't found a solution at all, or I'm looking at the wrong spot.
Is there a note or can somebody provide me what's in the indexes, so i can create it in our IDES system.
Regards,
Yam-Lang Lee

Hi Kiran,
Thank you very much. I managed to create the first index.
However not the indexes on table SC2T327F363DFA4T. Can't find any information for the indexes for this table. Did found note 959811. There it state that de indexes were deleted. But still stuck in the check_requirements of the SPAM Update!
Greetings,
Yammie

Unknown object in ABAP Dictionary

Hello
In st04 in "Missing tables and indexes" are many indexes have reported unknown "Unknown object in ABAP Dictionary".
This is because indexex are created directly in DB. Is there a way to solve this problem?
We have db : oracle 10.2.04 and sap SAP ECC 6.0 (Pkg. lvl. 254).

Hi,
In ST04, If you click Missing tables and indexes then next to "Unknown object in ABAP Dictionary" there is a information button which says as below, kindly go through it which could help you.
" Here objects which were found on the database but which are not defined
in the ABAP Dictionary are displayed. These objects are displayed for
information only, since they generally do not belong to the SAP System.
These objects normally do not cause problems.
The objects are generally created directly with database means. If the
author is unknown, the purpose of the table can sometimes be determined
using the display function. Any data can only be displayed with database
means since the SAP tools for displaying data are based on the
definition in the ABAP Dictionary.
In some cases, such objects were already overlooked by SAP at delivery
or occurred during upgrading. To check this, search in OSS using the
keyword DB02 and the Release level for a corresponding Note.
Customer tables, views and indexes should always be created with the
ABAP Dictionary. This is the only way to ensure that the objects are
recognized by the SAP System and that for example collisions can be
avoided during an upgrade."
Regards,
Sharath

Ecc 6.0 Abap Dictionary error in SCCL

Similar Messages

Maybe you are looking for