Error in CHECK_REQUIREMENTS phase (Open ABAP Dictionary Conversions)
Hi Gurus,
When were are trying to update SPAM/SAINT to version 7.00/0033 from 7.00/0029
we're encountering 'Open Conversions in the ABAP Dictionary' in CHECK_REQUIREMENTS phase, refraining to proceed further.
It was due to 2 indexes in a table.
When i checked(using SE14), those two indexes were not appearing in dictionary, hence we've removed them at the ORACLE level, reset the queue and tried to update again, and got the same error .
Table PAT03 - has the following
Patch - 'SAPKD70033'
Status - '?'
and the table PAT02 has 2 enties of those two indexes.
with Patch - 'OPEN_TBATG'
How to proceed further,pls provide us a solution.
Regards
Prabumanoharan
Hai,
Goto SE14 - select "Indexes" and "Activate". But you should have tried this before deleting the Indexes from the Oracle level.
or try restarting the update.
Regards,
Yoganand.V
Similar Messages
-
IDES ERP 2005 / open ABAP dictionary conversion during SPAM Update
Dear all,
First of all, I'm currently busy implementing a educational enviroment for our company, we are using IDES MySAP ERP 2005 SR1 MSSQL.
At the moment we are trying to upgrade the SPAM version from version 20 to 22.
However, during the requirement checks the following error occurred :
<b>Open conversions in the data dictionary</b>
<i>Phase CHECK_REQUIREMENTS: Explanation of Errors
Some open conversion requests still exist in the ABAP Data Dictionary
for the following ABAP Dictionary objects. To avoid inconsistencies and
loss of data, you must process these conversions first.
Proceed as follows:
- Open a new session.
- Start the Database Utility (transaction SE14).
- Correct the inconsistencies for the specified objects.
- Repeat the import phase. If no more inconsistencies are found, the
import continues.
Phase CHECK_REQUIREMENTS: Open ABAP Dictionary Conversions
Object Type Object Name
Table Index LXE_WRK_4 ~ STA
SC2T327F363DFA4T ~ ESI
SC2T327F363DFA4T ~ KYS
</i>
It seems that the indexes mentioned above are missing or doesn't exist!!!! i've tried looking for a sap note or a solution on SDN. However, haven't found a solution at all, or I'm looking at the wrong spot.
Is there a note or can somebody provide me what's in the indexes, so i can create it in our IDES system.
Regards,
Yam-Lang LeeHi Kiran,
Thank you very much. I managed to create the first index.
However not the indexes on table SC2T327F363DFA4T. Can't find any information for the indexes for this table. Did found note 959811. There it state that de indexes were deleted. But still stuck in the check_requirements of the SPAM Update!
Greetings,
Yammie -
SAINT Update on phase IMPORT ABAP Dictionary objects.
Hi All,
While uploading package using SAINT i am facing some errors. I am at phase CHECK_REQUIREMENTS and RUN_SPDD just completed, and getting the below message
button Repeat Skip Cust.Cockpit
"Phase CHECK_REQUIREMENTS: Explanation of Errors
Open Data Extraction Requests
The system has found a number of open data extraction requests. These
should be processed before starting the object import process, as
changes to DDIC structures could prevent data extraction requests from
being read after the import, thus causing them to terminate. You can
find more information about this problem in the SAP Notes 1081287,
1083709 and 328181.
Call the Customizing Cockpit data extraction transaction and process all
open extraction requests."
I want to stop the upload. Please let me know
1) CAN I Stop the upload at this phase.
2) Will there any implication on the sytem if i stop it
3) How to stop it
Please reply as i m stuck here now.
RegardsThis question has been asked and answered in multiple occations.
Did you search before posting?... my guess is NO.
Read the "Rules of Engagement"
Regards
Juan -
Patching ST_PI, open conversions in ABAP dictionary
Hello
during a patching of ST-21 2008 the tool stops at CHECK_REQUIREMENTS phase with the screen:
open conversions in ABAP dictionary
Some open conversion requests still exist in the ABAP Dictionary for the
following ABAP Dictionary objects. To avoid inconsistencies and loss of
data, you must process these conversions first.
Proceed as follows:
- Open a new session.
- Start the Database Utility (transaction SE14).
- Correct the inconsistencies for the specified objects.
- Repeat the import phase. If no more inconsistencies are found, the
import continues.
INDEX GLPCA-Z01
Now , no index exists in dictionary and database but in the past probably it existed and was cancelled . Anyway the table GLPCA is consistent in database and like runtime object.
I've activated it again but the problem is always the same
any idea?
thanks
Nicola- start transaction SE14
- use the menue to "DB Requests - Created with import"
Check if there are any outstanding conversions.
Markus -
Installation error phase "import ABAP" - ERP2005 IDES - mssql2005
Hi.
I've problems installing <b>ERP2005 IDES</b> with <b>microsoft sql server 2005</b> at <b>windows 2003server x64</b>.
I've installed solution manager 4.0 succesfylly at the same host.
I've read about simular problems at this forum (with oracle). But no solutions for me.
Error in phase "Import ABAP":
CJS-30022 Program 'Migration Monitor' exits with error code 103.
For details see log file(s) import_monitor.java.log, import_monitor.log
IMPORT_MONITOR.LOG:
ERROR: 2007-10-05 17:29:12 com.sap.inst.migmon.LoadTask run
Loading of 'SAPSDIC' import package is interrupted with R3load error.
Process 'E:\usr\sap\E01\SYS\exe\nuc\NTAMD64\R3load.exe -i SAPSDIC.cmd -dbcodepage 1100 -l SAPSDIC.log -loadprocedure fast' exited with return code 2.
For mode details see 'SAPSDIC.log' file.
Standard error output:
sapparam: sapargv( argc, argv) has not been called.
sapparam(1c): No Profile used.
SAPSDIC.LOG:
(IMP) INFO: ExeFastLoad failed with <2: BCP Commit failed>
(IMP) ERROR: ExeFastload: rc = 2
(DB) INFO: F4UHLP~1 created
In SAPSDIC.tsk I find one error:
D F4UHLP I err
I want to install nonunicode, but I've tried to install unicode with the same result.
I've also recieving this error in a log-file:
<b>sapparam: SAPSYSTEMNAME neither in Profile nor in Commandline</b>I understand that I manually can set the parameter SAPSYSTEMNAME in control.xml, but I've dont know where and if this is a good solution?
This is what i've been trying without success:
-Uninstalled the instance and deleted inst_dir/erp.
-Environment variable is set like inst_guide describes
-Paging Files is ok
-Access to table F4UHLP is ok
Can anybody help me? Please? I'm desperate.
Kindly regards
Harald Vedvik
Message was edited by:
Harald Vedvik
Message was edited by:
Harald VedvikHi again.
I posted my logs in the beginning of this thread, but if you want a more detailed
b]sapinst.log</b>:
<i>WARNING 2007-10-08 13:00:48
Errors when executing sql command: <p nr="0"/> If this message is displayed as a warning - it can be ignored. If this is an error - call your SAP support.
INFO 2007-10-08 13:00:49
Execute step doGrantServiceRights of component |NW_Onehost|ind|ind|ind|ind|00|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CreateDBandLoad|ind|ind|ind|ind|10|0|NW_CreateDB|ind|ind|ind|ind|0|0|NW_MSS_DB|ind|ind|ind|ind|2|0|MssOsUser|ind|ind|ind|ind|11|2.
INFO 2007-10-08 13:01:27
Output of C:\j2sdk1.4.2_15-x64\bin\java.exe -classpath migmon.jar -showversion com.sap.inst.migmon.imp.ImportMonitor -dbType MSS -importDirs E:\ERP2005IDES\Export\51032413_1\EXP1;E:\ERP2005IDES\Export\51032413_2\EXP2;E:\ERP2005IDES\Export\51032413_3\EXP3;E:\ERP2005IDES\Export\51032413_4\EXP4;E:\ERP2005IDES\Export\51032413_5\EXP5;E:\ERP2005IDES\Export\51032413_6\EXP6;E:\ERP2005IDES\Export\51032413_6\EXP7;E:\ERP2005IDES\Export\51032413_6\EXP8;E:\ERP2005IDES\Export\51032413_6\EXP9;E:\ERP2005IDES\Export\51032413_6\EXP10;E:\ERP2005IDES\Export\51032413_6\EXP11 -installDir D:\sapinst_instdir -orderBy "" -r3loadExe E:\usr\sap\E01\SYS\exe\nuc\NTAMD64\R3load.exe -tskFiles yes -extFiles no -dbCodepage 1100 -jobNum 3 -monitorTimeout 30 -loadArgs " -loadprocedure fast" -trace all -sapinst is written to the logfile import_monitor.java.log.
WARNING 2007-10-08 13:17:59
Execution of the command "C:\j2sdk1.4.2_15-x64\bin\java.exe -classpath migmon.jar -showversion com.sap.inst.migmon.imp.ImportMonitor -dbType MSS -importDirs E:\ERP2005IDES\Export\51032413_1\EXP1;E:\ERP2005IDES\Export\51032413_2\EXP2;E:\ERP2005IDES\Export\51032413_3\EXP3;E:\ERP2005IDES\Export\51032413_4\EXP4;E:\ERP2005IDES\Export\51032413_5\EXP5;E:\ERP2005IDES\Export\51032413_6\EXP6;E:\ERP2005IDES\Export\51032413_6\EXP7;E:\ERP2005IDES\Export\51032413_6\EXP8;E:\ERP2005IDES\Export\51032413_6\EXP9;E:\ERP2005IDES\Export\51032413_6\EXP10;E:\ERP2005IDES\Export\51032413_6\EXP11 -installDir D:\sapinst_instdir -orderBy "" -r3loadExe E:\usr\sap\E01\SYS\exe\nuc\NTAMD64\R3load.exe -tskFiles yes -extFiles no -dbCodepage 1100 -jobNum 3 -monitorTimeout 30 -loadArgs " -loadprocedure fast" -trace all -sapinst" finished with return code 103. Output:
java version "1.4.2_15"
Java(TM) 2 Runtime Environment, Standard Edition (build 1.4.2_15-b02)
Java HotSpot(TM) 64-Bit Server VM (build 1.4.2_15-b02, mixed mode)
Import Monitor jobs: running 1, waiting 18, completed 0, failed 0, total 19.
Loading of 'SAPSDIC' import package: ERROR
Import Monitor jobs: running 0, waiting 18, completed 0, failed 1, total 19.
ERROR 2007-10-08 13:17:59
CJS-30022 Program 'Migration Monitor' exits with error code 103. For details see log file(s) import_monitor.java.log, import_monitor.log.
ERROR 2007-10-08 13:17:59
FCO-00011 The step runMigrationMonitor with step key |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CreateDBandLoad|ind|ind|ind|ind|10|0|NW_ABAP_Import_Dialog|ind|ind|ind|ind|5|0|NW_ABAP_Import|ind|ind|ind|ind|0|0|runMigrationMonitor was executed with status ERROR .</i>
<b>import_monitor.log:</b><i>INFO: 2007-10-08 13:01:29
Import Monitor is started.
CONFIG: 2007-10-08 13:01:29
Application options:
dbCodepage=1100
dbType=MSS
extFiles=no
importDirs=E:\ERP2005IDES\Export\51032413_1\EXP1;E:\ERP2005IDES\Export\51032413_2\EXP2;E:\ERP2005IDES\Export\51032413_3\EXP3;E:\ERP2005IDES\Export\51032413_4\EXP4;E:\ERP2005IDES\Export\51032413_5\EXP5;E:\ERP2005IDES\Export\51032413_6\EXP6;E:\ERP2005IDES\Export\51032413_6\EXP7;E:\ERP2005IDES\Export\51032413_6\EXP8;E:\ERP2005IDES\Export\51032413_6\EXP9;E:\ERP2005IDES\Export\51032413_6\EXP10;E:\ERP2005IDES\Export\51032413_6\EXP11
installDir=D:\sapinst_instdir
jobNum=3
loadArgs= -loadprocedure fast
monitorTimeout=30
orderBy=
r3loadExe=E:\usr\sap\E01\SYS\exe\nuc\NTAMD64\R3load.exe
sapinst=
trace=all
tskFiles=yes
CONFIG: 2007-10-08 13:01:29
List of packages with table structure: 'SAP0000'.
CONFIG: 2007-10-08 13:01:29
List of packages with views: 'SAPVIEW'.
TRACE: 2007-10-08 13:01:29 com.sap.inst.migmon.imp.ImportStandardTask preCreate
Parse of 'D:\sapinst_instdir\DDLMSS.TPL' template file is started.
INFO: 2007-10-08 13:01:29 com.sap.inst.migmon.imp.ImportStandardTask preCreate
Parse of 'D:\sapinst_instdir\DDLMSS.TPL' template file is successfully completed.
Primary key creation: before load.
Index creation: after load.
INFO: 2007-10-08 13:01:29
Data codepage 4103 is determined using TOC file 'E:\ERP2005IDES\Export\51032413_1\EXP1\DATA\SAPAPPL0.TOC' for package 'SAPAPPL0'.
INFO: 2007-10-08 13:01:32
Version table 'SVERS' is found in STR file 'E:\ERP2005IDES\Export\51032413_4\EXP4\DATA\SAPSDIC.STR' from package 'SAPSDIC'.
INFO: 2007-10-08 13:01:32
Data conversion tables 'DDNTF,DDNTF_CONV_UC,DDNTT,DDNTT_CONV_UC' are found in STR file 'E:\ERP2005IDES\Export\51032413_4\EXP4\DATA\SAPSDIC.STR' from package 'SAPSDIC'.
TRACE: 2007-10-08 13:01:33 com.sap.inst.migmon.LoadTask run
Loading of 'SAPSDIC' import package is started.
TRACE: 2007-10-08 13:01:33 com.sap.inst.migmon.LoadTask processPackage
Task file generation for 'SAPSDIC' import package:
E:\usr\sap\E01\SYS\exe\nuc\NTAMD64\R3load.exe -ctf I E:\ERP2005IDES\Export\51032413_4\EXP4\DATA\SAPSDIC.STR D:\sapinst_instdir\DDLMSS.TPL SAPSDIC.TSK MSS -l SAPSDIC.log
TRACE: 2007-10-08 13:01:33 com.sap.inst.migmon.LoadTask processPackage
Loading of 'SAPSDIC' import package into database:
E:\usr\sap\E01\SYS\exe\nuc\NTAMD64\R3load.exe -i SAPSDIC.cmd -dbcodepage 1100 -l SAPSDIC.log -loadprocedure fast
ERROR: 2007-10-08 13:17:46 com.sap.inst.migmon.LoadTask run
Loading of 'SAPSDIC' import package is interrupted with R3load error.
Process 'E:\usr\sap\E01\SYS\exe\nuc\NTAMD64\R3load.exe -i SAPSDIC.cmd -dbcodepage 1100 -l SAPSDIC.log -loadprocedure fast' exited with return code 2.
For mode details see 'SAPSDIC.log' file.
Standard error output:
sapparam: sapargv( argc, argv) has not been called.
sapparam(1c): No Profile used.
sapparam: SAPSYSTEMNAME neither in Profile nor in Commandline
WARNING: 2007-10-08 13:17:59
Cannot continue import because not all import packages with data conversion tables are loaded successfully.
WARNING: 2007-10-08 13:17:59
1 error(s) during processing of packages.
INFO: 2007-10-08 13:17:59
Import Monitor is stopped.</i>
Do you need more than alredy posted for sapsdic.log?
SAPSDIC.LOG:
<i>(IMP) INFO: ExeFastLoad failed with <2: BCP Commit failed>
(IMP) ERROR: ExeFastload: rc = 2
(DB) INFO: F4UHLP~1 created</i>
I dont know if you recive my points? I've been giving you points:)
best regards
Harald -
Error in Phase Run ABAP report
Hi All,
We are running an installation on I5/OS for ERP 6.0 EHP5. Installation is stucked at phase Run ABAP reports where it is trying to run RSWBOINS report and giving an error SQL error -7008. Log says ddic user is not able to login in the system and RFC all fails. However system is up and running fine.
I checked number of notes 116192 but it did not help. One note says to upgrade the database library and we did the same but issue still remains. Anyone phase similar errors, Please suggest.
Thanks
SunnyHi Sunny,
it sounds like some tables are not journaled. You may want to try to run AS4FIXFILE DBLIB(R3<sid>DATA) STRJRN(*YES).
If that does not help, I suggest to check SAP note 1387754, and to try the workaround described there, or to get the newest version of AS4FXIFILE and to try to run it again.
Best regards,
Dorothea Stein -
Error in Phase Import ABAP by Installation of Solution Manager 4.0
Hello,
i have started Installation of Solution Manager 4.0 (Win,MaxDb).An Error occurred during phase Abap Import. From 18 Jobs only 13 was completed, 5 failed. After retry next 3 jobs was completed, but the last 2 will not completed (i have tried 3 times).
Messages from logs:
import_monitor.log
TRACE: 2007-06-09 15:40:49 com.sap.inst.migmon.LoadTask run
Loading of 'SAPAPPL0' import package is started.
TRACE: 2007-06-09 15:40:49 com.sap.inst.migmon.LoadTask processPackage
Loading of 'SAPAPPL0' import package into database:
D:\usr\sap\SM2\SYS\exe\uc\NTI386\R3load.exe -i SAPAPPL0.cmd -dbcodepage 4103 -l SAPAPPL0.log -nolog -c 0
ERROR: 2007-06-09 19:04:59 com.sap.inst.migmon.LoadTask run
Loading of 'SAPAPPL0' import package is interrupted with R3load error.
Process 'D:\usr\sap\SM2\SYS\exe\uc\NTI386\R3load.exe -i SAPAPPL0.cmd -dbcodepage 4103 -l SAPAPPL0.log -nolog -c 0' exited with return code 2.
For mode details see 'SAPAPPL0.log' file.
Standard error output:
sapparam: sapargv( argc, argv) has not been called.
sapparam(1c): No Profile used.
sapparam: SAPSYSTEMNAME neither in Profile nor in Commandline
SAPAPPL0.log
(IMP) INFO: import of LISCOMDES completed (0 rows) #20070608172145
(RDI) ERROR: missing attribute description for table "LISDOMAIN" in DB independent control file "E:\install_dvd\export\EXP3\DATA\SAPAPPL0.STR"
(DB) ERROR: DDL statement failed
(ALTER TABLE "LISDOMAIN" ALTER PRIMARY KEY ( "DOMNAM", "STATE" ) )
DbSlExecute: rc = 103
(SQL error -942)
error message returned by DbSl:
(IMP) ERROR: LOCK TABLE failed for table LISDOMAIN
(RDI) ERROR: missing attribute description for table "LISDOMAIN" in DB independent control file "E:\install_dvd\export\EXP3\DATA\SAPAPPL0.STR"
Have anybody any ideas or sugestions?
Regards
Bogdan RokosaHello,
problem solved. After installation stop and system restart, phase ran without errors.
Regards
Bogdan Rokosa -
What is use of Conversion Routine in Abap dictionary
Hi,
Can any body please tell me the proper use of <b>Conversion Routine in Abap dictionary.</b>
Please give me a practical example where it has been used.
Thanks
prabhuduttahi,
here is help for conversion routine
Conversion takes place when converting the contents of a screen field from display format to SAP-internal format and vice versa and when outputting with the ABAP statement WRITE, depending on the data type of the field.
If standard conversion is not suitable, it can be overridden by specifying a conversion routine in the underlying domain.
A conversion routine is identified by its five-place name and is stored as a group of two function modules. The function modules have a fixed naming convention. The following function modules are assigned to conversion routine xxxxx:
CONVERSION_EXIT_xxxxx_INPUT
CONVERSION_EXIT_xxxxx_OUTPUT
The INPUT module performs the conversion from display format to internal format. The OUTPUT module performs the conversion from internal format to display format.
If a screen field refers to a domain with a conversion routine, this conversion routine is executed automatically each time an entry is made in this screen field or when values are displayed with this screen field.
regards,
Raghavendra -
Error in DEPLOY_ONLINE_DEPL phase EHPI 7.01 SPS05 DualStack ABAP+JAVA
Hello experts,
I'm getting an error in DEPLOY_ONLINE_DEPL phase (Downtime Roadmap) under J2EE tab in enhancement package installation in our BW System (Netweaver 7.0 SP 17 to NW 7.01 SPS 05 DualStack ABAP+JAVA)
The system is running on High Availability server.
Restarting Q2B 00 instance failed.
Cannot find instance with instance number 0 on host mcho35au in the cluster.
I'm not sure, but maybe anything is wrong with my profiles...? I don't know....
All J2EE deployments has been successfully finished (JSPM).
I have restarted all instances DVEBMGS00 & SCS01 and Shadow Instance DVEBMGS02. SCS01 Instance is up and running as well.
Then I have stop EHPI Upgrade and start it again.
DEPLOY_ONLINE_DEPL_DDB_18.LOG:
==========================================
RequestController.java:178)[Thread[main,5,main]]: Deployment of queue sapjup-queue completedwith error Cannot check the state(running/stoped) of the CI.
Restarting Q2B 00 Instance failed
Connot find instance with instance number 0 on host mcho35au in the cluster
==========================================
An error has occurred during the execution of the DEPLOY_ONLINE_DEPL phase.
Error while executing DeploymentManager phase with action deploySlot. Check the log files for the specified action. Could not execute deployment of stack file /usr/sap/trans/EPS/in/SMSDXML_CROSSSYS_20091109075202.238.xml. The deployment of the queue failed. Deployment of queue sapjup-queue completed with error Cannot check the state(running/stoped) of the CI. Restarting Q2B 00 instance failed. Cannot find instance with instance number 0 on host mcho35au in the cluster. JSPM version is 7.01.5.0.20. Current JSPM log directory is /usr/sap/Q2B/DVEBMGS00/j2ee/JSPM/log/log_2009_11_14_18_20_03.
You can find more information in the log file /usr/sap/swdc/EHPI/java/log/DEPLOY_ONLINE_DEPL_DDB_19.LOG.
==========================================
Any ideas ?
Please help me in this case.
I'm wating for any feedbacks.
Thanks a lot in advance !
Gerd
Edited by: Gerd Schuster on Nov 14, 2009 6:23 PMProblem:
The DEPLOY_ONLINE_DEPL phase (Downtime Roadmap) under J2EE tab in enhancement package installation in BW System (Netweaver 7.0 SP 17 to NW 7.01 SPS 05 DualStack ABAP+JAVA, system is running on High Availability server) stopped with error:
RequestController.java:178)[Threadmain,5,main]: Deployment of queue sapjup-queue
completedwith error Cannot check the state(running/stoped) of the CI.
Restarting Q2B 00 Instance failed
Connot find instance with instance number 0 on host mcho35au in the cluster
An error has occurred during the execution of the DEPLOY_ONLINE_DEPL phase.
Error while executing DeploymentManager phase with action deploySlot. Check the log files for
the specified action. Could not execute deployment of stack
file /usr/sap/trans/EPS/in/SMSDXML_CROSSSYS_20091109075202.238.xml. The deployment
of the queue failed. Deployment of queue sapjup-queue completed with error Cannot check the
state(running/stoped) of the CI. Restarting Q2B 00 instance failed. Cannot find instance with instance
number 0 on host mcho35au in the cluster. JSPM version is 7.01.5.0.20. Current JSPM log directory
is /usr/sap/Q2B/DVEBMGS00/j2ee/JSPM/log/log_2009_11_14_18_20_03.
You can find more information in the log file /usr/sap/swdc/EHPI/java/log/DEPLOY_ONLINE_DEPL_DDB_19.LOG.
Solution:
stop all instances (shadow instance, SCSxx)
In a High Availability server you have to modify few parameters in DEFAULT profile temporarily (replace alias-servername with real hostname):
DEFAULT.PFL: SAPLOCALHOST = mcho35au
DEFAULT.PFL: SAPDBHOST = mcho35au
DEFAULT.PFL: rdisp/mshost = mcho35au
# DEFAULT.PFL: rdisp/vbname = mcho35au_Q2B_00 (<- maby it'snot relevant)
# DEFAULT.PFL: rdisp/enqname = mcho35au_Q2B_00 (<- maby it'snot relevant)
# DEFAULT.PFL: rdisp/btcname = mcho35au_Q2B_00 (<- maby it'snot relevant)
DEFAULT.PFL: rdisp/sna_gateway = mcho35au
in instance DVEBMGS00 switch profile icman = 0 to 1 (otherwise J2EE instance will not started)
startsap DVEBMGS00
Restart EHPI Upgrade (EHPI keep the old DEFAULT.PFL settings in shared memory!)
./EHPI/STARTUP jce_policy_zip=90000125.zip
Repeat phase DEPLOY_ONLINE_DEPL
Gerd
Edited by: Gerd Schuster on Nov 16, 2009 2:59 PM -
Error is encountered during import ABAP phase
Hi All,
When trying to install ECC6 on windows 2003 server the below error is encountered during import ABAP phase....Can any one help me in this regard.
CJS-30022 Program 'Migration Monitor' exists
ERROR 2009-07-08 08:39:33
CJS-30022 Program 'Migration Monitor' exits with error code 103.
For details see log file(s) import_monitor.java.log, import_monitor.log.
Thanks
Sandeep Singh DShi,
Below are the logs for import_monitor.log and import_monitor.java.log
import_monitor.log :
TRACE: 2009-07-11 21:11:30 com.sap.inst.migmon.LoadTask run
Loading of 'SAPSSEXC' import package is started.
TRACE: 2009-07-11 21:11:30 com.sap.inst.migmon.LoadTask processPackage
Loading of 'SAPSSEXC' import package into database:
D:\usr\sap\EP2\SYS\exe\uc\NTI386\R3load.exe -i SAPSSEXC.cmd -dbcodepage 4103 -l SAPSSEXC.log -stop_on_error
TRACE: 2009-07-11 21:11:30 com.sap.inst.migmon.LoadTask run
Loading of 'SAPAPPL1' import package is started.
TRACE: 2009-07-11 21:11:30 com.sap.inst.migmon.LoadTask processPackage
Loading of 'SAPAPPL1' import package into database:
D:\usr\sap\EP2\SYS\exe\uc\NTI386\R3load.exe -i SAPAPPL1.cmd -dbcodepage 4103 -l SAPAPPL1.log -stop_on_error
ERROR: 2009-07-11 21:12:38 com.sap.inst.migmon.LoadTask run
Loading of 'SAPAPPL1' import package is interrupted with R3load error.
Process 'D:\usr\sap\EP2\SYS\exe\uc\NTI386\R3load.exe -i SAPAPPL1.cmd -dbcodepage 4103 -l SAPAPPL1.log -stop_on_error' exited with return code 2.
For mode details see 'SAPAPPL1.log' file.
Standard error output:
sapparam: sapargv( argc, argv) has not been called.
sapparam(1c): No Profile used.
sapparam: SAPSYSTEMNAME neither in Profile nor in Commandline
ERROR: 2009-07-11 21:15:10 com.sap.inst.migmon.LoadTask run
Loading of 'SAPSSEXC' import package is interrupted with R3load error.
Process 'D:\usr\sap\EP2\SYS\exe\uc\NTI386\R3load.exe -i SAPSSEXC.cmd -dbcodepage 4103 -l SAPSSEXC.log -stop_on_error' exited with return code 2.
For mode details see 'SAPSSEXC.log' file.
Standard error output:
sapparam: sapargv( argc, argv) has not been called.
sapparam(1c): No Profile used.
sapparam: SAPSYSTEMNAME neither in Profile nor in Commandline
WARNING: 2009-07-11 21:15:30
Cannot start import of packages with views because not all import packages with tables are loaded successfully.
WARNING: 2009-07-11 21:15:30
2 error(s) during processing of packages.
import_monitor.java.log
Java HotSpot(TM) Client VM (build 1.4.2_12-b03, mixed mode)
Import Monitor jobs: running 1, waiting 2, completed 16, failed 0, total 19.
Import Monitor jobs: running 2, waiting 1, completed 16, failed 0, total 19.
Loading of 'SAPAPPL1' import package: ERROR
Import Monitor jobs: running 1, waiting 1, completed 16, failed 1, total 19.
Loading of 'SAPSSEXC' import package: ERROR
Import Monitor jobs: running 0, waiting 1, completed 16, failed 2, total 19.
Thanks,
Sandeep
Edited by: Sandeep Singh DeviSingh on Jul 13, 2009 11:42 AM -
Error in the phase IMPORT_PROPER while applying support packages
Dear All,
I am on ECC 6.0(ABAP+JAVA) SR2, SUSE Linux 10 SP1, DB2.
I have successfully applied the kernel patch and started applying the support packages, i have successfully completed applying the ABAP, Basis, BW, HR and other related patches, but i am not sure why i am stuck at the import_proper phase when applying the SAP_APPL patches (SAPKH60008 and SAPKH60009 both in the same queue) and my tp log is as follows
========================================================================================================
START imp all SCD 20081229080538 DDIC sealcpro 20081229080537
INFO: event SAP_IMPORT_START triggered successfully
INFO TBATG CONVERSION OF SCD N not needed DDIC sealcpro 20081229080537
START tp_getprots SCD P 20081229080539 DDIC sealcpro 20081229080537
2EETP000 sap_dext called with msgnr "1":
2EETP000 db call info
2EETP000 function: db_setget
2EETP000 fcode: RT_SETB (65535)
2EETP000 tabname: TRBAT
2EETP000 len (char): 0
2EETP000 key:
2EETP000 retcode: 1
1AETP000 exit in function texitnow
ERROR: EXIT(16) -> process ID is: 5319
STOP imp all SCD 0016 20081229080602 DDIC sealcpro 20081229080537
=========================================================================================================
And also when i look at the Support package import logs they show that
TEST IMPORT
Import ABAP Dictionary Objects and
ABAP Dictionary Activation phases ended with return code 4
But i dont think this can give any problem.
I have tried to import from the phase where it stopped, but all of a sudden i get disconnected from SAP and get an error message saying that NO CONNECTION TO THE DATABASE, then when i check for the processes for dw and db2 there are process already running.
I had to start SAP and only then i was able to connect to the SERVER again.
Can you please help me on this..
For any more information plz let me know
Thanks and regards
HunkyDear Balaji,
Thank you very much for the reply...
I deleted the import request in the STMS and wi ran the RDDIMPDP and RDDMNTAB reports and restart the SPAM, but this time the SPAM immediately stopped, but i am still connected to the system and the error which i got earlier (database connection error ) is now not occuring.
But otherwise also i noticed that i get the following ABAP Dump while this error is triggering
===================================================================
DBIF_REPO_INTERNAL_ERROR
Internal error when accessing program "CX_SY_OPEN_SQL_DB=============CP ".
An unspecified internal error occurred in the SAP-internal
database interface.
For further analysis the SAP system log should be examined
(transaction SM21).
Check the entries in the developer trace of the relevant work process
(transaction ST11).
Attempted to access component "LOAD" of program
"CX_SY_OPEN_SQL_DB=============CP ".
If the error occures in a non-modified SAP program, you may be able to
find an interim solution in an SAP Note.
If you have access to SAP Notes, carry out a search with the following
keywords:
"DBIF_REPO_INTERNAL_ERROR" " "
"SAPLSTPA" or " "
==========================================================================
Based on this error i searched few notes and got the below results 309583 and 132383 but these are not for my release.
So i request you to kindly help me on this as i am running out of time in delivering my server.
Waiting for all the valuble replies
Thank you in advance
Regards
Hunky -
Error during upgrade phase JOB_RSUPGCUA_SHD
Hi Everyone,
We are in the process of completing a combined ERP 6.0 Upgrade / Unicode Conversion. Our starting release is ECC 5.0 (ABAP only) and we are running Oracle 10.2.0.2 on AIX 5.3.
We are receiving the following error in phase JOB_RSUPGCUA_SHD:
1 ETQ201XEntering upgrade-phase "JOB_RSUPGCUA_SHD" ("20080812163717")
2 ETQ366 Connect variables are set for shadow instance access
4 ETQ399 System-nr = '56', GwService = 'sapgw56'
4 ETQ399 Environment variables:
4 ETQ399 dbs_ora_schema=SAPR3
4 ETQ399 auth_shadow_upgrade=1
4 ETQ260 Starting batchjob "RSUPGCUAGEN111"
4 ETQ010 Date & Time: 20080812163717
4 ETQ260 Starting batchjob "RSUPGCUAGEN111"
4 ETQ230 Starting RFC Login to: System = "ENP", GwHost = "aix12j1", GwService = "sapgw56"
4 ETQ359 RFC Login to: System="ENP", Nr="56", GwHost="aix12j1", GwService="sapgw56"
4 ETQ232 RFC Login succeeded
4 ETQ233 Calling function module "SUBST_START_BATCHJOB" by RFC
2EETQ235 Call of function module "SUBST_START_BATCHJOB" by RFC failed (error-status "10")
2EETQ261 Start of batchjob "RSUPGCUAGEN111" failed
1EETQ203 Upgrade phase "JOB_RSUPGCUA_SHD" aborted with errors ("20080812163717")
We originally had some issues with the shadow system not starting in phase START_SHDI_FIRST. The source of the problem was the value of paramter ipc/shm_psize_40 in the instance profile of the shadow system. When we ran "sappfpar check" on the profile, the output indicated that the paramter was too small. We backed up the profile, increased the parameter to the value "sappfpar check" recommended and then stopped the shadow system via "SAPup stopshd." We then repeated the phase. The shadow instance was started successfully and the upgrade proceeded with subsequent phases.
We encountered the error above several phases later. The shadow instance is started and I am able to login with user DDIC. As detailed in the error message above, function module SUBST_START_BATCHJOB is aborting with error code 10. Based on what I can interpret from source code of the function module, this seems to indicate that there is a problem with the program values. The SM21 log indicates that "Program name RSUPGCUAGEN111 is invalid."
What do we need to do to get past this error?
Thanks in advance for any assistance,
Tommyefor our case it was that the shadow instance was not completely stsarted, some processes were down, cause the ipc pool 40 was too small, i found the error in the killed work processes.
Probleme resolved as susch. i hope it will help someone.
Regards -
Support Pack upgrade error in Import Phase
Hello,
Currently I am upgrading SCM system with Support pack level 12 to 20 . When i am applying Basis 12 to 20. I got an error in Import_Proper phase.
Could you please help me on this? I tried and still searching solution for this..But no luck...
Os is : AIX and
Log File: /usr/sap/trans/log/SAPIB70013.xxx
Main import
Transport request : SAPKB70013
System : xxxx
tp path : tp
Version and release: 372.04.71 700
child process 934006 terminated -> setting rc=12 for this import portion
sap_dext called with msgnr 1:
db call info -
function: db_report_interface
fcode: CLOSE_LINE_MODE
tabname: SOURCE
len (char): 40
key: CL_OBJECT_COLLECTION==========CT
retcode: 1
SQL error -913 accessing : [IBM][CLI Driver][DB2] DSNT408I SQLCODE = -913, ER
child process 1212554 terminated -> setting rc=12 for this import portion
sap_dext called with msgnr 1:
db call info -
function: db_report_interface
fcode: CLOSE_LINE_MODE
tabname: SOURCE
len (char): 40
key: CL_WDR_APPLICATION_WINDOW=====CT
retcode: 1
SQL error -913 accessing : [IBM][CLI Driver][DB2] DSNT408I SQLCODE = -913, ER
child process 1171520 terminated -> setting rc=12 for this import portion
sap_dext called with msgnr 1:
db call info -
function: db_report_interface
fcode: CLOSE_LINE_MODE
tabname: SOURCE
len (char): 40
key: CL_WDY_MD_EVENT_SOURCE========CI
retcode: 1
SQL error -913 accessing : [IBM][CLI Driver][DB2] DSNT408I SQLCODE = -913, ER
child process 1331412 terminated -> setting rc=12 for this import portion
sap_dext called with msgnr 1:
db call info -
function: db_xrtab
fcode: RT_MI_LOAD
tabname: ECSCR_DATA
len (char): 106
key: EC_TEST_DATA 00000000P10 IECATTDEFAULT
retcode: 1
SQL error -904 accessing : [IBM][CLI Driver][DB2] DSNT408I SQLCODE = -904, ER
insert / update sequence failed due to an error in DBI.
maybe there's a concurrent process which inserted this table entry at the same time.
insert / update sequence failed due to an error in DBI.
maybe there's a concurrent process which inserted this table entry at the same time.
child process 1310922 terminated -> setting rc=12 for this import portion
sap_dext called with msgnr 1:
db call info -
function: db_xrtab
fcode: RT_MI_END
tabname: WDY_APP_PROPERTY
len (char): 64
key: DEMO_UIEL_DROPDOWN_BY_IDX DEMO_VIEW
retcode: 1
SQL error -904 accessing : [IBM][CLI Driver][DB2] DSNT408I SQLCODE = -904, ER
import portion 018446 - 999999 not imported because the child processes died for unknown reason
child process 1310924 terminated -> setting rc=12 for this import portion
sap_dext called with msgnr 1:
db call info -
function: db_report_interface
fcode: CLOSE_LINE_MODE
tabname: SOURCE
len (char): 40
key: CL_WDY_MD_OUTGOING_EVENT======CT
retcode: 1
SQL error -913 accessing : [IBM][CLI Driver][DB2] DSNT408I SQLCODE = -913, ER
child process 1286192 terminated -> setting rc=12 for this import portion
sap_dext called with msgnr 1:
db call info -
function: db_xrtab
fcode: RT_MI_LOAD
tabname: ECSCR_DATA
len (char): 106
key: EC_TEST_DATA 00000000P10 IECATTDEFAULT
retcode: 1
SQL error -904 accessing : [IBM][CLI Driver][DB2] DSNT408I SQLCODE = -904, ER
import portion 009158 - 018411 not imported because the child processes died for unknown reason
import portion 018412 - 018527 not imported because the child processes died for unknown reason
import portion 018528 - 999999 not imported because the child processes died for unknown reason
sap_dext called with msgnr 1:
db call info -
function: db_xrtab
fcode: RT_MI_LOAD
tabname: ECSCR_DATA
len (char): 106
key: EC_TEST_DATA 00000000P10 IECATTDEFAULT
retcode: 1
SQL error -904 accessing : [IBM][CLI Driver][DB2] DSNT408I SQLCODE = -904, ER
Main import
End date and time : 20100909034914
Ended with return code: ===> 12 <===
| ######################################
Thanks and Regards,
Sankar
SAP BASIS ConsultantHi,
Thanks for you reply. I restarted import but no luck still. I activated some object also not working. when i call SPAM it is not going to the SPAM pager. Showing dump...
Runtime Errors CALL_FUNCTION_NOT_FOUND
Except. CX_SY_DYN_CALL_ILLEGAL_FUNC
Date and Time 10.09.2010 09:41:37
Short text
Function module "POSS_UIREQ_OPT_SUBMIT" not found.
What happened?
The function module "POSS_UIREQ_OPT_SUBMIT" is called,
but cannot be found in the library.
Error in the ABAP Application Program
The current ABAP program "SAPLSTXC" had to be terminated because it has
come across a statement that unfortunately cannot be executed.
Error analysis
An exception occurred that is explained in detail below.
The exception, which is assigned to class 'CX_SY_DYN_CALL_ILLEGAL_FUNC', was
not caught in
procedure "OPEN_FORM" "(FUNCTION)", nor was it propagated by a RAISING clause.
Since the caller of the procedure could not have anticipated that the
exception would occur, the current program is terminated.
The reason for the exception is:
The program "SAPLSTXC" contains the CALL FUNCTION statement.
The name of the function module to be called is "POSS_UIREQ_OPT_SUBMIT".
No function module exists with the name "POSS_UIREQ_OPT_SUBMIT".
All function modules are listed in the Function Library (SE37).
Possible reasons:
a) Wrong name specified. Pay particular attenti
upper/lower case and underscores ("_").
or
b) Transport error
c) In the case of an enqueue/dequeue module,
the lock object may not have been activated
(ABAP/4 Dictionary).
When i tried to check function module it is not there..
Could you please help on this?
Regards,
Sankar Basis Consultant -
Delete restrict for ABAP Dictionary database table
Hi,
I defined two database tables in ABAP dictionary, one with master data, and one with records referencing the master data.
I also defined a foreign key relationship in the second table, so that new entries in the second table are checked against the master data table.
In addition to this behaviour, I also want the Dicitionary to perform a check the other way round. In other words, if I try to delete a record in the master data table, this should not be possible if there are records in the second table referencing this record. Thats how foreign key relationships work in Oracle databases.
Is there a way to force this behaviour for ABAP Dictionary tables, too? Or is it possible to make the table maintenance view perform this check?
Thanks for your help!
Kind regards,
TobiasHello Tobias,
I can delete records in the master table which have dependent entries in the second table without an error or a warning.
How are you deleting the entries, via SM30?
If yes, you can use the [Event 03: Before Deleting the Display Data|http://help.sap.com/saphelp_nw04s/helpdata/en/91/ca9f14a9d111d1a5690000e82deaaa/content.htm]. In this TMG event you can check if the entry can be deleted at all!
If you're using Open SQL statements to delete the records, i don't think DB layer implicitly checks the dependency. You can always put an explicit check though
Btw, out-of-curiosity, is this a custom or standard table?
BR,
Suhas -
DDNTF_CONV_UC~" does not exist in the ABAP Dictionary
Hello Experts ,
We are migrating our ECC system from Oracle to HANA DB using DMO - during Post Processing phase we are getting the following error :
(screenshot attached)
4 ETG003 Table "DDNTF_CONV_UC~" does not exist in the ABAP Dictionary
4 ETG003 Table "DDNTF~" does not exist in the ABAP Dictionary
4 ETG003 Table "DDNTT_CONV_UC~" does not exist in the ABAP Dictionary
4 ETG003 Table "DDNTT~" does not exist in the ABAP Dictionary\
1. Am not sure why Shadow tables are considered in this phase ?
2. What steps i can follow to fix this error ?[I tried activating those using se14 but activation button is disabled].
3. I have a option to ignore and move forward but am not sure about the side affects ?
Source ECC6 Ehp5 702 on Oracle.
Target ECC6 Ehp7 740 on HANA.
SUM SP12 PL02
Thanks
DevHi Avinash,
two comments on this:
This is not an issue, as this text is NOT an error message.
(An error message lists the "E" as second character,
but the screenshot above shows a space as second character.)
The log handling for this phase will be adapted in SUM SP13, so that non-errors are not listed at this point, to avoid this confusion.
SUM 1.0 SP12 PL 1 to PL 3 must not be used any longer, see SAP Note 2122247.
Regards, Boris
Maybe you are looking for
-
Error while updating reimbursements Journey start date / End date missing
Dear All, From ESS employee requested for Reimbursement of LTA from Benifits & Payments - Reimbursements & Claims. There is 3 level approval process and got the approval for reimbursement. We maintained Earned leave record for 6 days in 2001 - Absen
-
You have any idea how to fix an accelerometer in iphone 4 void of warranty?
do you have an idea how to fix the accelerometer in an iphone 4? (the warranty is void)
-
Solution manager 7.1 sp4 , error @Bytecode adpater installation
HI All, I am facing the below issue while executing the managed system wizard @ Bytecode adapter installation. Error @ Managed system Failed to create Introscope Agent Connector at: /usr/sap/SMD/SMDA98/SMDAgent/applications.config/com.sap.smd.age
-
Purches could not be made. Help please.
Hey, when I want to buy something to a game it says "Your purchase could not be carried out if you want help, contact support for itunes on http://www.apple.com/support/itunes/ww/." The problem is that the site isn't helping. I can't find the solutio
-
I have just bought your pdf file converter however I lose my font when the file is converted to a pdf is that normal? Thank you