ECC 6.0 failover problem

Hi,
I have also installed ecc 6.0 in Aix 5.3 with oracle 10G.
We have 2 physical servers and in one server i have installed
both the CI & DB instance and in another server i have installed the application server(dialog instance). and it is also a failover concept.
When i stop my ci&db server all the mount points are comming into my application server thru hacmp clustering but i am not able to start my sap manually in my application server.
Is there anything to be done so that the sap starts?
Plz help me....if u can u can also mail me at [email protected]
Regards
Ashwin

Hi,
The cluster must have a mobile IP, and the IP must have a virtual hostname assigned (not the hostname of your server1 or server2). Then the tnsnames.ora, listener.ora must point to this virtual name.
The Sap instance profiles must have the virtual name defined too (usually the profiles with the server hostnames are links to the one containing the virtual name). I mean something like that:
lrwx------ START_DVEBMGS00_<server1> -> START_DVEBMGS00_<virtualname>
lrwx------ <SID>_DVEBMGS00_<server1> -> <SID>_DVEBMGS00_<virtualname>
lrwx------ START_DVEBMGS00_<server2> -> START_DVEBMGS00_<virtualname>
lrwx------ <SID>_DVEBMGS00_<server2> -> <SID>_DVEBMGS00_<virtualname>
-rw-rr START_DVEBMGS00_<virtualname>
-rw-rr <SID>_DVEBMGS00_<virtualname>
-rwxr-xr-x DEFAULT.PFL
Verify this. Hope this could help.
Best Regards,
JC Llanes.

Similar Messages

No data in ecc variables in failover mode

Hi all,
got a problem with custom enterprise data layout when CAD is connected to secondary node.
With "set enterprise..." I set a special layout for CAD enterprise data in my script. This works fine as long as CAD is connected to primary node. When CAD is connected to secondary node there is no data in expanded call variales and CAD displays default layout. Changing default layout and writing the content to predefined variables works fine. So it seems only extended call variables are not working in failover mode.
Any ideas?
Br
Sven
(UCCX v8.5)

Hi Sven,
Looks like TAC helped fix the issue. Previously we had rebooted both servers without success. TAC suggested to restart the Desktop Enterprise Service on both servers (I did Pub first than Sub). I've verified ECC variables are being sent to CAD correctly.
The root cause might of been a network outage we had a week ago. We were using the Desktop Workflow Administrator at the time of the outage.
Kyle

SAP IDES ECC 6.0 Installation Problems

Hello SAP-Experts! 
 
I'm installting an SAP System for the first time and have some problems now.
 
The System I want to install is an IDES mySAP ERP 2005 /ECC 6.0 on MS SQL 2005 Database. (Based on AS ABAP)
I have problems with the database instance. In the 14 of 16 Phase the ABAP import fails in the 6 import job. 
 
The logs extracts are showing the following: 
 
import_monitor.java.log: 
 
Loading of 'SAPAPPL1_10' import package: OK 
Import Monitor jobs: running 9, waiting 59, completed 4, failed 0, total 72. 
Import Monitor jobs: running 10, waiting 58, completed 4, failed 0, total 72. 
Loading of 'PCL2' import package: OK 
Import Monitor jobs: running 9, waiting 58, completed 5, failed 0, total 72. 
Import Monitor jobs: running 10, waiting 57, completed 5, failed 0, total 72. 
Loading of 'SAPCLUST' import package: ERROR 
Import Monitor jobs: running 9, waiting 57, completed 5, failed 1, total 72. 
Import Monitor jobs: running 10, waiting 56, completed 5, failed 1, total 72. 
Loading of 'SAPSDIC_2' import package: OK 
Import Monitor jobs: running 9, waiting 56, completed 6, failed 1, total 72. 
Import Monitor jobs: running 10, waiting 55, completed 6, failed 1, total 72. 
Loading of 'SAPSDIC_3' import package: OK 
Import Monitor jobs: running 9, waiting 55, completed 7, failed 1, total 72. 
Import Monitor jobs: running 10, waiting 54, completed 7, failed 1, total 72. 
..... 
 
SAPCLUST.LOG: 
 
(DB) INFO: REGUC created 
(DB) INFO: REGUC~0 created 
(IMP) INFO: import of REGUC completed (146737 rows) #20070206184732 
(DB) INFO: RFBLG created 
(DB) INFO: RFBLG~0 created 
myCluster (63.15.Imp): 1595: inconsistent settings for table position validity detected. 
myCluster (63.15.Imp): 1598: nametab says table positions are not valid. 
myCluster (63.15.Imp): 1601: alternate nametab says table positions are valid. 
myCluster (63.15.Imp): 1605: for field 305 of alternate nametab displacement is 3134, yet dbtabpos shows 3244. 
myCluster (63.15.Imp): 1608: character length is 2 (in) resp. 1 (out). 
myCluster (63.15.Imp): 1255: unable to retrieve nametab info for logic table BSEG . 
myCluster (63.15.Imp): 8300: unable to acquire nametab info for logic table BSEG . 
myCluster (63.15.Imp): 2900: failed to convert cluster data of cluster item. 
myCluster: RFBLG *800**0001**0100000000**1995* 
myCluster (63.15.Imp): 320: error during conversion of cluster item. 
myCluster (63.15.Imp): 323: affected physical table is RFBLG. 
(CNV) ERROR: code page conversion failed 
 
 rc = 2 
 
 
.--============--
RSCP - Error
`----
 
(DB) INFO: RFMHN created 
 
(DB) INFO: RFMHN~0 created 
 
IMPORT_MONITOR.LOG: 
 
ERROR: 2007-02-06 18:49:44 com.sap.inst.migmon.LoadTask run 
 
Loading of 'SAPCLUST' import package is interrupted with R3load error. 
 
Process '
vsids\sapmnt\IDS\SYS\exe\nuc\NTI386\R3load.exe -i SAPCLUST.cmd -dbcodepage 1100 -l SAPCLUST.log -loadprocedure fast' exited with return code -1,073,741,819. 
 
For mode details see 'SAPCLUST.log' file. 
 
Standard error output: 
 
sapparam: sapargv( argc, argv) has not been called. 
 
sapparam(1c): No Profile used. 
 
sapparam: SAPSYSTEMNAME neither in Profile nor in Commandline 
 
SAPINST.LOG: 
 
WARNING 2007-02-06 17:28:23 
 
Errors when executing sql command: p nr="0" If this message is displayed as a warning - it can be ignored. If this is an error - call your SAP support 
 
What can I do now? What is the problem here? 
Hope you can help here. 
 
Regards, 
Lukas 

Hello
I would recommend you uninstall SAP and SQL, then reinstall SQL using the SAP provided script. This will ensure your codepage is set correctly.
I would also recommend you install this system as a Unicode system.
Thanks
N.P.C

New functionality in ECC 6.0 and problems during sap implementation

Dear Gurus,
may i know the details of the New functionality in ECC 6.0 on (MM,SD,PP,QM,PS,HR,PM,FI/CO,BI,XI,DMS ) or what is the problems coming at the time of implementation of ECC 6.0.
THANKS AND REGARDS
RS

Ritesh,
Question is bit confusing
may i know the details of the New functionality in ECC 6.0 on (MM,SD,PP,QM,PS,HR,PM,FI/CO,BI,XI,DMS )
That means you are going to upgarde from some earlier version .what is that version ?
Then you might find some specific information at
https://websmp102.sap-ag.de/uda -
>Upgrade Dependency Analyzer
what is the problems coming at the time of *implementation* of ECC 6.0.
If its a new implemenation you will not face problem , but you need to configure everything accordingly.
Problem depends upon what all you are using from standard and customizing.
Above provided link will help you.
Just add up
http://wiki.sdn.sap.com/wiki/display/ERPLO/NewfunctionalityinECC6.0%28+MM%29
Regards,

Oracle RAC 11g R1 Release Connection Failover Problem

Hi All,
In our Architecture we are using Oracle RAC 11g R1. Below is the JDBC URL :
JDBCURL = jdbc:oracle:thin:@(DESCRIPTION =(ADDRESS = (PROTOCOL = TCP)(HOST = Host1-vip)(PORT = 1521))(ADDRESS = (PROTOCOL = TCP)(HOST = Host2-vi
p)(PORT = 1521))(LOAD_BALANCE = ON)(FAILOVER=ON)(CONNECT_DATA =(SERVER = DEDICATED)(SERVICE_NAME = <Service_name>)))
We are using two node RAC. The problem is whenever we are rebooting a Node and rejoin the cluster, Application Servers are not able to recognize that.
Suppose we have node1 and node2, I will take down node1 (freeze the cluster) and then reboot node1 and bring it back up( and join the cluster). At this point, My application servers are not able to recognize that some new DBserver(node1) had joined the cluster until I restart my application servers.
Please Provide me a solution for this. Thanks alot to everyone in advance.
Edited by: 877010 on Aug 4, 2011 2:00 PM
Edited by: 877010 on Aug 8, 2011 10:19 AM

Please try using this
JDBCURL = jdbc:oracle:thin:@(DESCRIPTION =(ADDRESS = (PROTOCOL = TCP)(HOST = Host1-vip)(PORT = 1521))(ADDRESS = (PROTOCOL = TCP)(HOST = Host2-vi
p)(PORT = 1521))(LOAD_BALANCE = YES)(FAILOVER=YES)(CONNECT_DATA =(SERVER = DEDICATED)(SERVICE_NAME = <Service_name>)))

ISE1.1.3 failover problems

Hi guys
I am going to write a short story and will try to explain the problem I have.
Here is my setup. I have two ISE servers running I. Primary and secondary mode. Ise1 and ise2. Everything is configured and sync is complete. My access switch is a 2960 which has dot1x enabled and radius defined in the Config. It's using ISE 1 as primary and ise2 as secondary point of authentication. There are phones connected to switch and PCM behind the phone.
The phones and pc authenticate using EAP-TLS which works fines when both servers are up and running. Printers use mab and video end points use EAP-PEAP. All good till here.
When I shut down my primary server , phones printers and video endpoints authenticate without any problem. Pc is having issue and I am getting error message saying EAP timeout after120 seconds.
Today just to test that ise servers are configured properly. I removed the primary server from 2960 Config. Now switch has only one radius server listed for authentication. Which is ISE 2. The authentication works fine. All of them. Then I shut down ise1 just for the sake of it. At this step I have ise2 running and 2960 switch has only one radius configured. Everything works fine here.
The minute I add ISE 1 as primary radius server pc authentication fails and I get EAP time out message.
Looks like I have to tweak some configuration on 2960 so that it failover to backup ISE ASAP. Has anyone seen that ?
Thanks.
Sent from Cisco Technical Support iPad App

Do you have the following lines in your config?
radius-server dead-criteria time 5 tries 3
radius-server host auth-port 1812 acct-port 1813 test username radius-test key 7
radius-server host auth-port 1812 acct-port 1813 test username radius-test key 7
I could see a situation where you have the aaa server group configured, but not this, and your switch failed to identify the primary RADIUS server as down, forcing the issue of manual removal.

IOS NAT Load Balancing w/ Failover Problem

Greetings, i am currently using the configuration below to provide failover between two DSL connections, all is working fine but i had expected outbound connections to be load balanced between the two DSL links on a round robin basis, however looking at the nat translations shows that only one of the links is being used, failover on the other hand works without issue.
track 1 ip sla 1 reachability
interface FastEthernet0/0
ip address 10.50.1.254 255.255.255.0
ip nat inside
ip tcp adjust-mss 1452
interface FastEthernet0/1
ip address 192.168.1.6 255.255.255.0
ip nat inside
ip tcp adjust-mss 1452
interface Dialer0
description WAN Interface
mtu 1492
ip address **********
no ip redirects
no ip unreachables
no ip proxy-arp
ip nat outside
encapsulation ppp
dialer pool 1
interface Dialer1
description WAN Interface
mtu 1492
ip address **********
no ip redirects
no ip unreachables
no ip proxy-arp
ip nat outside
encapsulation ppp
dialer pool 2
ip forward-protocol nd
ip route 0.0.0.0 0.0.0.0 212.74.102.15 track 1
ip route 0.0.0.0 0.0.0.0 213.246.177.200 10
ip nat translation timeout 2
ip nat translation tcp-timeout 2
ip nat translation udp-timeout 2
ip nat translation icmp-timeout 2
ip nat inside source route-map opal interface Dialer1 overload oer
ip nat inside source route-map pipex interface Dialer0 overload oer
ip access-list extended dynamicNat
permit ip 10.50.1.0 0.0.0.255 any
permit ip 192.168.1.0 0.0.0.255 any
deny ip any any
ip sla 1
icmp-echo 212.74.102.15
frequency 5
ip sla schedule 1 life forever start-time now
route-map opal permit 10
match ip address dynamicNat
set ip next-hop 213.246.177.200
route-map pipex permit 10
match ip address dynamicNat
set ip next-hop verify-availability 212.74.102.15 1 track 1
Any assistance would be much appreciated.
Regards

Hi
Thank you for this post man ! this have been so useful. I experienced almost the same problem the router was load balancing well, but the failover was not occuring well between both equal default route.
After using those command: ip nat translation timeout for tcp icmp and udp all the system has worked propertly. yeah you need a Big bottle of Jack Daniel :) the funniest thing behind is that help me 5 years After......................!!!!

SAP ECC 6.0 language problem

Hello!
I have installed SAP ECC 6.0 UNICODE system, i had english and german languages as default, an i supplemented Romanian in client 000, before the client copy. I implemented all notes regarding the localization, but whenever i logon on the system in Romanian, it's processing very very slow. For example, only to logon it takes me about 1 hour. Usual transactions, like "me21n" is initializing in about 15 minutes and so on. What can i do?

I executed the report but unfortunately the problem persists. If i logon in other languages it works, but if i tried the language that i supplemented in 000 client (in my case Romanian), it takes me about 1 hour only to log on my system.

ECC 6.0 Upgrade - Problem in phase PARDIST_SHD

Upgrading from 4.6C to ECC 6.0 on Windows/SQL Server.
Phase PARDIST_SHD failed with the following error:
"Table change not possible. There is a DB trigger on the table."
This problem is documented in the note 825146 (Add Info on upgrading to NW04s) in section IV item number 7. The note points to note number 956198 for the fix, which is to delete the trigger defined on table MSSDEADLCK manually in the SQL Server query analyzer.
I have performed the steps outlined in note 956198 to delete the trigger, but when restarting the upgrade it keeps coming back with the same error. It seems that, even if I restart the upgrade with INIT option, the upgrade is not re-setting to the beginning of the phase, but continues to error out immediately upon restart. Originally the phase took about 45 minutes to complete before it aborted with the error. Each time I have restarted the phase it ends after only a few seconds.
Anyone have any thoughts? I'm real close to just starting the whole thing over, I've never run into anything like this before. I am using the latest SAPup.

SAP gave me the answer.
ATAB needed to be renamed the Operation library.

Cluster Disk failover problem

Hi Everyone
I have built a Windows 2008 R2 Failover Cluster. It is scheduled to be a HyperV cluster, but I have removed HyperV from the equation as I am having problems.
Its a 2 node cluster connecting to a PS4000 via iscsi.
Network config is
Nic 1 - Host and Cluster Management - 10.160.19.x/24
Nic 2 & 3 - icsci 10.160.46..x/24, MPIO,
Nic 4 - CSV - 10.160.47/24
Nic 5 - LiveMigration - 10.160.49.x/24
Nic6 - VMSwitch - HyperV Virtual Machine "External" nic.
The cluster ip is on 10.160.19.x.
The Cluster validation passes sucessfully and so does creating the cluster and performing post creating validations. When I simulate failures of the Quorum disk, it fails over to the second node after requisites retrys on the first node...all good.
However when I simulate failures on the second cluster disk, it just fails on the primary node. I can bring it online on same node or if I stop the cluster service on that node, everything successfully fails over to the second node. But automatic/simulating
failover isn't working.
When I dump out the cluster log(below)this is all the entries pertaining to the failover attempt. Sorry for the log dump.
My analysis of the log, leads me in two directions, Is my nic assignment and config correct? Can I confirm the Cluster disk guids are identical between nodes?
I appreciate any assistance. Apologies on the large log.
Thanks
[NM] Received request from client address 10.160.19.22.
00000b18.00000f50::2011/01/13-16:10:32.005 ERR [RHS] s_RhsRpcCreateResType: ERROR_NOT_READY(21)' because of 'Startup routine for ResType MSMQ returned 21.'
00000730.00000d3c::2011/01/13-16:10:32.005 WARN [RCM] Failed to load restype 'MSMQ': error 21.
00000730.00000d3c::2011/01/13-16:10:32.005 WARN [RCM] rcm::RcmApi::ResTypeControl: ResType MSMQ's DLL is not present on this node. Attempting to find a good node...
00000b18.00000f50::2011/01/13-16:10:32.005 ERR [RHS] s_RhsRpcCreateResType: ERROR_NOT_READY(21)' because of 'Startup routine for ResType MSMQ returned 21.'
00000730.00000d40::2011/01/13-16:10:32.005 WARN [RCM] Failed to load restype 'MSMQ': error 21.
00000b18.00000f50::2011/01/13-16:10:32.317 ERR [RHS] s_RhsRpcCreateResType: ERROR_NOT_READY(21)' because of 'Startup routine for ResType MSMQTriggers returned 21.'
00000730.00000d3c::2011/01/13-16:10:32.317 WARN [RCM] Failed to load restype 'MSMQTriggers': error 21.
00000730.00000d3c::2011/01/13-16:10:32.317 WARN [RCM] rcm::RcmApi::ResTypeControl: ResType MSMQTriggers's DLL is not present on this node. Attempting to find a good node...
00000b18.00000f50::2011/01/13-16:10:32.317 ERR [RHS] s_RhsRpcCreateResType: ERROR_NOT_READY(21)' because of 'Startup routine for ResType MSMQTriggers returned 21.'
00000730.000005e0::2011/01/13-16:10:32.317 WARN [RCM] Failed to load restype 'MSMQTriggers': error 21.
00000b18.00000f50::2011/01/13-16:10:32.317 ERR [RHS] s_RhsRpcCreateResType: ERROR_NOT_READY(21)' because of 'Startup routine for ResType MSMQ returned 21.'
00000730.000005e0::2011/01/13-16:10:32.317 WARN [RCM] Failed to load restype 'MSMQ': error 21.
00000730.000005e0::2011/01/13-16:10:32.317 WARN [RCM] rcm::RcmApi::ResTypeControl: ResType MSMQ's DLL is not present on this node. Attempting to find a good node...
00000b18.00000c1c::2011/01/13-16:10:32.317 ERR [RHS] s_RhsRpcCreateResType: ERROR_NOT_READY(21)' because of 'Startup routine for ResType MSMQ returned 21.'
00000730.00000d3c::2011/01/13-16:10:32.317 WARN [RCM] Failed to load restype 'MSMQ': error 21.
00000b18.00000c1c::2011/01/13-16:10:32.332 ERR [RHS] s_RhsRpcCreateResType: ERROR_NOT_READY(21)' because of 'Startup routine for ResType MSMQTriggers returned 21.'
00000730.00000d3c::2011/01/13-16:10:32.332 WARN [RCM] Failed to load restype 'MSMQTriggers': error 21.
00000730.00000d3c::2011/01/13-16:10:32.332 WARN [RCM] rcm::RcmApi::ResTypeControl: ResType MSMQTriggers's DLL is not present on this node. Attempting to find a good node...
00000b18.00000c1c::2011/01/13-16:10:32.332 ERR [RHS] s_RhsRpcCreateResType: ERROR_NOT_READY(21)' because of 'Startup routine for ResType MSMQTriggers returned 21.'
00000730.00000d40::2011/01/13-16:10:32.332 WARN [RCM] Failed to load restype 'MSMQTriggers': error 21.
00000b18.00000c1c::2011/01/13-16:10:32.332 ERR [RHS] s_RhsRpcCreateResType: ERROR_NOT_READY(21)' because of 'Startup routine for ResType MSMQ returned 21.'
00000730.000005e0::2011/01/13-16:10:32.332 WARN [RCM] Failed to load restype 'MSMQ': error 21.
00000730.000005e0::2011/01/13-16:10:32.332 WARN [RCM] rcm::RcmApi::ResTypeControl: ResType MSMQ's DLL is not present on this node. Attempting to find a good node...
00000b18.00000c1c::2011/01/13-16:10:32.332 ERR [RHS] s_RhsRpcCreateResType: ERROR_NOT_READY(21)' because of 'Startup routine for ResType MSMQ returned 21.'
00000730.00000d40::2011/01/13-16:10:32.332 WARN [RCM] Failed to load restype 'MSMQ': error 21.
00000b18.00000c1c::2011/01/13-16:10:32.332 ERR [RHS] s_RhsRpcCreateResType: ERROR_NOT_READY(21)' because of 'Startup routine for ResType MSMQTriggers returned 21.'
00000730.00000d3c::2011/01/13-16:10:32.332 WARN [RCM] Failed to load restype 'MSMQTriggers': error 21.
00000730.00000d3c::2011/01/13-16:10:32.332 WARN [RCM] rcm::RcmApi::ResTypeControl: ResType MSMQTriggers's DLL is not present on this node. Attempting to find a good node...
00000b18.00000c1c::2011/01/13-16:10:32.332 ERR [RHS] s_RhsRpcCreateResType: ERROR_NOT_READY(21)' because of 'Startup routine for ResType MSMQTriggers returned 21.'
00000730.000005e0::2011/01/13-16:10:32.332 WARN [RCM] Failed to load restype 'MSMQTriggers': error 21.
00000730.00000d3c::2011/01/13-16:10:35.296 INFO [RCM] rcm::RcmApi::FailResource: (VM1)
00000730.00000d40::2011/01/13-16:10:35.296 INFO [RCM] HandleMonitorReply: FAILURENOTIFICATION for 'VM1', gen(1) result 0.
00000730.00000d40::2011/01/13-16:10:35.296 INFO [RCM] TransitionToState(VM1) Online-->ProcessingFailure.
00000730.00000d40::2011/01/13-16:10:35.296 INFO [RCM] rcm::RcmGroup::UpdateStateIfChanged: (Available Storage, Online --> Failed)
00000730.00000d40::2011/01/13-16:10:35.296 ERR [RCM] rcm::RcmResource::HandleFailure: (VM1)
00000730.00000d40::2011/01/13-16:10:35.296 INFO [RCM] resource VM1: failure count: 1, restartAction: 2.
00000730.00000d40::2011/01/13-16:10:35.296 INFO [RCM] Will restart resource in 500 milliseconds.
00000730.00000d40::2011/01/13-16:10:35.296 INFO [RCM] TransitionToState(VM1) ProcessingFailure-->[WaitingToTerminate to DelayRestartingResource].
00000730.00000d40::2011/01/13-16:10:35.296 INFO [RCM] rcm::RcmGroup::UpdateStateIfChanged: (Available Storage, Failed --> Pending)
00000730.00000d40::2011/01/13-16:10:35.296 INFO [RCM] TransitionToState(VM1) [WaitingToTerminate to DelayRestartingResource]-->[Terminating to DelayRestartingResource].
00000bd4.00000eb0::2011/01/13-16:10:35.296 INFO [RES] Physical Disk <VM1>: Terminate request.
00000bd4.00000eb0::2011/01/13-16:10:35.327 WARN [RES] Physical Disk <VM1>: Terminate: Failed to offline volume \Device\Harddisk3\Partition1, Error 5
00000b18.00000c1c::2011/01/13-16:10:35.343 ERR [RHS] s_RhsRpcCreateResType: ERROR_NOT_READY(21)' because of 'Startup routine for ResType MSMQ returned 21.'
00000730.00000d3c::2011/01/13-16:10:35.343 WARN [RCM] Failed to load restype 'MSMQ': error 21.
00000730.00000d3c::2011/01/13-16:10:35.343 WARN [RCM] rcm::RcmApi::ResTypeControl: ResType MSMQ's DLL is not present on this node. Attempting to find a good node...
00000b18.00000c1c::2011/01/13-16:10:35.343 ERR [RHS] s_RhsRpcCreateResType: ERROR_NOT_READY(21)' because of 'Startup routine for ResType MSMQ returned 21.'
00000730.00000d30::2011/01/13-16:10:35.343 WARN [RCM] Failed to load restype 'MSMQ': error 21.
00000bd4.00000eb0::2011/01/13-16:10:35.343 INFO [RES] Physical Disk <VM1>: HardDiskpCloseSVIHandles: Exit
00000b18.00000c1c::2011/01/13-16:10:35.343 ERR [RHS] s_RhsRpcCreateResType: ERROR_NOT_READY(21)' because of 'Startup routine for ResType MSMQTriggers returned 21.'
00000730.00000d3c::2011/01/13-16:10:35.343 WARN [RCM] Failed to load restype 'MSMQTriggers': error 21.
00000730.00000d3c::2011/01/13-16:10:35.343 WARN [RCM] rcm::RcmApi::ResTypeControl: ResType MSMQTriggers's DLL is not present on this node. Attempting to find a good node...
00000b18.00000c1c::2011/01/13-16:10:35.343 ERR [RHS] s_RhsRpcCreateResType: ERROR_NOT_READY(21)' because of 'Startup routine for ResType MSMQTriggers returned 21.'
00000730.00000d30::2011/01/13-16:10:35.343 WARN [RCM] Failed to load restype 'MSMQTriggers': error 21.
00000b18.00000c1c::2011/01/13-16:10:35.359 ERR [RHS] s_RhsRpcCreateResType: ERROR_NOT_READY(21)' because of 'Startup routine for ResType MSMQ returned 21.'
00000730.00000d3c::2011/01/13-16:10:35.359 WARN [RCM] Failed to load restype 'MSMQ': error 21.
00000730.00000d3c::2011/01/13-16:10:35.359 WARN [RCM] rcm::RcmApi::ResTypeControl: ResType MSMQ's DLL is not present on this node. Attempting to find a good node...
00000b18.00000c1c::2011/01/13-16:10:35.359 ERR [RHS] s_RhsRpcCreateResType: ERROR_NOT_READY(21)' because of 'Startup routine for ResType MSMQ returned 21.'
00000730.00000d30::2011/01/13-16:10:35.359 WARN [RCM] Failed to load restype 'MSMQ': error 21.
00000b18.00000c1c::2011/01/13-16:10:35.359 ERR [RHS] s_RhsRpcCreateResType: ERROR_NOT_READY(21)' because of 'Startup routine for ResType MSMQTriggers returned 21.'
00000730.00000d3c::2011/01/13-16:10:35.359 WARN [RCM] Failed to load restype 'MSMQTriggers': error 21.
00000730.00000d3c::2011/01/13-16:10:35.359 WARN [RCM] rcm::RcmApi::ResTypeControl: ResType MSMQTriggers's DLL is not present on this node. Attempting to find a good node...
00000b18.00000c1c::2011/01/13-16:10:35.359 ERR [RHS] s_RhsRpcCreateResType: ERROR_NOT_READY(21)' because of 'Startup routine for ResType MSMQTriggers returned 21.'
00000730.00000d30::2011/01/13-16:10:35.359 WARN [RCM] Failed to load restype 'MSMQTriggers': error 21.
00000b18.00000c1c::2011/01/13-16:10:35.437 ERR [RHS] s_RhsRpcCreateResType: ERROR_NOT_READY(21)' because of 'Startup routine for ResType MSMQ returned 21.'
00000730.00000d3c::2011/01/13-16:10:35.437 WARN [RCM] Failed to load restype 'MSMQ': error 21.
00000730.00000d3c::2011/01/13-16:10:35.437 WARN [RCM] rcm::RcmApi::ResTypeControl: ResType MSMQ's DLL is not present on this node. Attempting to find a good node...
00000b18.00000c1c::2011/01/13-16:10:35.437 ERR [RHS] s_RhsRpcCreateResType: ERROR_NOT_READY(21)' because of 'Startup routine for ResType MSMQ returned 21.'
00000730.00000d30::2011/01/13-16:10:35.437 WARN [RCM] Failed to load restype 'MSMQ': error 21.
00000b18.00000c1c::2011/01/13-16:10:35.452 ERR [RHS] s_RhsRpcCreateResType: ERROR_NOT_READY(21)' because of 'Startup routine for ResType MSMQTriggers returned 21.'
00000730.00000d3c::2011/01/13-16:10:35.452 WARN [RCM] Failed to load restype 'MSMQTriggers': error 21.
00000730.00000d3c::2011/01/13-16:10:35.452 WARN [RCM] rcm::RcmApi::ResTypeControl: ResType MSMQTriggers's DLL is not present on this node. Attempting to find a good node...
00000b18.00000c1c::2011/01/13-16:10:35.452 ERR [RHS] s_RhsRpcCreateResType: ERROR_NOT_READY(21)' because of 'Startup routine for ResType MSMQTriggers returned 21.'
00000730.00000d30::2011/01/13-16:10:35.452 WARN [RCM] Failed to load restype 'MSMQTriggers': error 21.
00000b18.00000c1c::2011/01/13-16:10:35.452 ERR [RHS] s_RhsRpcCreateResType: ERROR_NOT_READY(21)' because of 'Startup routine for ResType MSMQ returned 21.'
00000730.00000d3c::2011/01/13-16:10:35.452 WARN [RCM] Failed to load restype 'MSMQ': error 21.
00000730.00000d3c::2011/01/13-16:10:35.452 WARN [RCM] rcm::RcmApi::ResTypeControl: ResType MSMQ's DLL is not present on this node. Attempting to find a good node...
00000b18.00000c1c::2011/01/13-16:10:35.452 ERR [RHS] s_RhsRpcCreateResType: ERROR_NOT_READY(21)' because of 'Startup routine for ResType MSMQ returned 21.'
00000730.00000d30::2011/01/13-16:10:35.452 WARN [RCM] Failed to load restype 'MSMQ': error 21.
00000b18.00000c1c::2011/01/13-16:10:35.452 ERR [RHS] s_RhsRpcCreateResType: ERROR_NOT_READY(21)' because of 'Startup routine for ResType MSMQTriggers returned 21.'
00000730.00000d3c::2011/01/13-16:10:35.452 WARN [RCM] Failed to load restype 'MSMQTriggers': error 21.
00000730.00000d3c::2011/01/13-16:10:35.452 WARN [RCM] rcm::RcmApi::ResTypeControl: ResType MSMQTriggers's DLL is not present on this node. Attempting to find a good node...
00000b18.00000c1c::2011/01/13-16:10:35.452 ERR [RHS] s_RhsRpcCreateResType: ERROR_NOT_READY(21)' because of 'Startup routine for ResType MSMQTriggers returned 21.'
00000730.00000d30::2011/01/13-16:10:35.452 WARN [RCM] Failed to load restype 'MSMQTriggers': error 21.
00000bd4.00000eb0::2011/01/13-16:10:36.263 INFO [RES] Physical Disk: ReleaseDisk: stop reserve succeeded on device 3 (sig 44423655)
00000730.00000d30::2011/01/13-16:10:36.279 INFO [RCM] HandleMonitorReply: TERMINATERESOURCE for 'VM1', gen(2) result 0.
00000730.00000d30::2011/01/13-16:10:36.279 INFO [RCM] TransitionToState(VM1) [Terminating to DelayRestartingResource]-->DelayRestartingResource.
00000730.00000d3c::2011/01/13-16:10:36.794 INFO [RCM] Delay-restarting VM1 and any waiting dependents.
00000730.00000d3c::2011/01/13-16:10:36.794 INFO [RCM] TransitionToState(VM1) DelayRestartingResource-->OnlineCallIssued.
00000bd4.00000eb0::2011/01/13-16:10:36.794 INFO [RES] Physical Disk <VM1>: Online request.
00000730.00000298::2011/01/13-16:10:36.794 INFO [RCM] HandleMonitorReply: ONLINERESOURCE for 'VM1', gen(2) result 997.
00000730.00000298::2011/01/13-16:10:36.794 INFO [RCM] TransitionToState(VM1) OnlineCallIssued-->OnlinePending.
00000bd4.00000c04::2011/01/13-16:10:36.794 INFO [RES] Physical Disk <VM1>: Arbitrate request: FastPath 0
00000bd4.00000c04::2011/01/13-16:10:36.794 INFO [RES] Physical Disk: Enter EnumerateDevices: EnumDevice 0
00000bd4.00000c04::2011/01/13-16:10:36.809 INFO [RES] Physical Disk: Exit EnumerateDevices: status 0
00000bd4.00000c04::2011/01/13-16:10:36.841 INFO [RES] Physical Disk: Successful reserve, disk is unowned, key 4daf7466734d
00000bd4.00000c04::2011/01/13-16:10:36.841 INFO [RES] Physical Disk: Update disk props returns 0
00000bd4.00000c04::2011/01/13-16:10:36.841 INFO [RES] Physical Disk <VM1>: Disk is offline
00000730.00000298::2011/01/13-16:10:36.841 INFO [GUM] Node 1: Processing RequestLock 1:42
00000730.00000314::2011/01/13-16:10:36.841 INFO [GUM] Node 1: Processing GrantLock to 1 (sent by 2 gumid: 566)
00000bd4.00000c04::2011/01/13-16:10:36.841 WARN [RES] Physical Disk <VM1>: OnlineThread: Failed to get volume guid for device
\\?\GLOBALROOT\Device\Harddisk3\Partition1\. Error 3
00000b18.00000c1c::2011/01/13-16:10:36.856 ERR [RHS] s_RhsRpcCreateResType: ERROR_NOT_READY(21)' because of 'Startup routine for ResType MSMQ returned 21.'
00000730.00000d3c::2011/01/13-16:10:36.856 WARN [RCM] Failed to load restype 'MSMQ': error 21.
00000730.00000d3c::2011/01/13-16:10:36.856 WARN [RCM] rcm::RcmApi::ResTypeControl: ResType MSMQ's DLL is not present on this node. Attempting to find a good node...
00000bd4.00000bf8::2011/01/13-16:10:36.856 INFO [RES] Physical Disk: PNP: Adding volume
\\?\STORAGE#Volume#{73432ff7-18ee-11e0-aded-0026b93b46a0}#0000000000100000#{53f5630d-b6bf-11d0-94f2-00a0c91efb8b}
00000bd4.00000f30::2011/01/13-16:10:36.856 INFO [RES] Physical Disk <VM1>: Completed HardDiskpUpdateRegistryWorker (start time 16:10:36.841)
00000bd4.00000bf8::2011/01/13-16:10:36.856 INFO [RES] Physical Disk: PNP: Add Volume exit, status 0
00000b18.00000c1c::2011/01/13-16:10:36.856 ERR [RHS] s_RhsRpcCreateResType: ERROR_NOT_READY(21)' because of 'Startup routine for ResType MSMQ returned 21.'
00000730.00000d40::2011/01/13-16:10:36.856 WARN [RCM] Failed to load restype 'MSMQ': error 21.
00000b18.00000c1c::2011/01/13-16:10:36.856 ERR [RHS] s_RhsRpcCreateResType: ERROR_NOT_READY(21)' because of 'Startup routine for ResType MSMQTriggers returned 21.'
00000730.00000d3c::2011/01/13-16:10:36.856 WARN [RCM] Failed to load restype 'MSMQTriggers': error 21.
00000730.00000d3c::2011/01/13-16:10:36.856 WARN [RCM] rcm::RcmApi::ResTypeControl: ResType MSMQTriggers's DLL is not present on this node. Attempting to find a good node...
00000b18.00000c1c::2011/01/13-16:10:36.856 ERR [RHS] s_RhsRpcCreateResType: ERROR_NOT_READY(21)' because of 'Startup routine for ResType MSMQTriggers returned 21.'
00000730.00000d40::2011/01/13-16:10:36.856 WARN [RCM] Failed to load restype 'MSMQTriggers': error 21.
00000b18.00000c1c::2011/01/13-16:10:36.872 ERR [RHS] s_RhsRpcCreateResType: ERROR_NOT_READY(21)' because of 'Startup routine for ResType MSMQ returned 21.'
00000730.00000d3c::2011/01/13-16:10:36.872 WARN [RCM] Failed to load restype 'MSMQ': error 21.
00000730.00000d3c::2011/01/13-16:10:36.872 WARN [RCM] rcm::RcmApi::ResTypeControl: ResType MSMQ's DLL is not present on this node. Attempting to find a good node...
00000b18.00000c1c::2011/01/13-16:10:36.872 ERR [RHS] s_RhsRpcCreateResType: ERROR_NOT_READY(21)' because of 'Startup routine for ResType MSMQ returned 21.'
00000730.00000d40::2011/01/13-16:10:36.872 WARN [RCM] Failed to load restype 'MSMQ': error 21.
00000b18.00000c1c::2011/01/13-16:10:36.872 ERR [RHS] s_RhsRpcCreateResType: ERROR_NOT_READY(21)' because of 'Startup routine for ResType MSMQTriggers returned 21.'
00000730.00000d3c::2011/01/13-16:10:36.872 WARN [RCM] Failed to load restype 'MSMQTriggers': error 21.
00000730.00000d3c::2011/01/13-16:10:36.872 WARN [RCM] rcm::RcmApi::ResTypeControl: ResType MSMQTriggers's DLL is not present on this node. Attempting to find a good node...
00000b18.00000c1c::2011/01/13-16:10:36.872 ERR [RHS] s_RhsRpcCreateResType: ERROR_NOT_READY(21)' because of 'Startup routine for ResType MSMQTriggers returned 21.'
00000730.00000298::2011/01/13-16:10:36.872 WARN [RCM] Failed to load restype 'MSMQTriggers': error 21.
00000bd4.00000c04::2011/01/13-16:10:40.850 WARN [RES] Physical Disk <VM1>: OnlineThread: Failed to set volguid \??\Volume{7343300a-18ee-11e0-aded-0026b93b46a0}. Error: 183.
00000bd4.00000c04::2011/01/13-16:10:40.850 INFO [RES] Physical Disk <VM1>: Found 2 mount points for device \Device\Harddisk3\Partition1
00000bd4.00000c04::2011/01/13-16:10:40.850 INFO [RES] Physical Disk <VM1>: VolumeIsNtfs: Volume
\\?\GLOBALROOT\Device\Harddisk3\Partition1\ has FS type NTFS
00000bd4.00000c04::2011/01/13-16:10:40.850 INFO [RES] Physical Disk: Volume
\\?\GLOBALROOT\Device\Harddisk3\Partition1\ has FS type NTFS
00000bd4.00000c04::2011/01/13-16:10:40.850 INFO [RES] Physical Disk: MountPoint V:\ points to volume
\\?\Volume{7343300a-18ee-11e0-aded-0026b93b46a0}\
00000bd4.00000c04::2011/01/13-16:10:40.850 DBG [ClRtl] CaptureShareInfo: Share 0000000000000050, Server 0000000000000000, Path 0000000000000056 SD 0000000000000000 size 242
00000bd4.00000c04::2011/01/13-16:10:40.850 WARN [ClRtl] SsCoreShareAdd(): status = 2118 share = V$ server = (null)
00000bd4.00000c04::2011/01/13-16:10:40.850 DBG [ClRtl] CaptureShareInfo: Share 0000000000000050, Server 0000000000000000, Path 0000000000000056 SD 0000000000000000 size 242
00000bd4.00000c04::2011/01/13-16:10:40.850 INFO [RHS] Resource VM1 has come online. RHS is about to report status change to RCM
00000730.00000d3c::2011/01/13-16:10:40.850 INFO [RCM] HandleMonitorReply: ONLINERESOURCE for 'VM1', gen(2) result 0.
00000730.00000d3c::2011/01/13-16:10:40.850 INFO [RCM] TransitionToState(VM1) OnlinePending-->Online.
00000730.00000d3c::2011/01/13-16:10:40.850 INFO [RCM] rcm::RcmGroup::UpdateStateIfChanged: (Available Storage, Pending --> Online)
00000bd4.00000c04::2011/01/13-16:10:40.850 INFO [RES] Physical Disk: DriveLetter mask: 0x200000
00000b18.00000c1c::2011/01/13-16:10:40.896 ERR [RHS] s_RhsRpcCreateResType: ERROR_NOT_READY(21)' because of 'Startup routine for ResType MSMQ returned 21.'
00000730.00000d30::2011/01/13-16:10:40.896 WARN [RCM] Failed to load restype 'MSMQ': error 21.
00000730.00000d30::2011/01/13-16:10:40.896 WARN [RCM] rcm::RcmApi::ResTypeControl: ResType MSMQ's DLL is not present on this node. Attempting to find a good node...
00000b18.00000c1c::2011/01/13-16:10:40.896 ERR [RHS] s_RhsRpcCreateResType: ERROR_NOT_READY(21)' because of 'Startup routine for ResType MSMQ returned 21.'
00000730.000006d8::2011/01/13-16:10:40.896 WARN [RCM] Failed to load restype 'MSMQ': error 21.
00000b18.00000c1c::2011/01/13-16:10:40.912 ERR [RHS] s_RhsRpcCreateResType: ERROR_NOT_READY(21)' because of 'Startup routine for ResType MSMQTriggers returned 21.'
00000730.00000d30::2011/01/13-16:10:40.912 WARN [RCM] Failed to load restype 'MSMQTriggers': error 21.
00000730.00000d30::2011/01/13-16:10:40.912 WARN [RCM] rcm::RcmApi::ResTypeControl: ResType MSMQTriggers's DLL is not present on this node. Attempting to find a good node...
00000b18.00000c1c::2011/01/13-16:10:40.912 ERR [RHS] s_RhsRpcCreateResType: ERROR_NOT_READY(21)' because of 'Startup routine for ResType MSMQTriggers returned 21.'
00000730.000006d8::2011/01/13-16:10:40.912 WARN [RCM] Failed to load restype 'MSMQTriggers': error 21.
00000b18.00000c1c::2011/01/13-16:10:40.912 ERR [RHS] s_RhsRpcCreateResType: ERROR_NOT_READY(21)' because of 'Startup routine for ResType MSMQ returned 21.'
00000730.00000d30::2011/01/13-16:10:40.912 WARN [RCM] Failed to load restype 'MSMQ': error 21.
00000730.00000d30::2011/01/13-16:10:40.912 WARN [RCM] rcm::RcmApi::ResTypeControl: ResType MSMQ's DLL is not present on this node. Attempting to find a good node...
00000b18.00000c1c::2011/01/13-16:10:40.912 ERR [RHS] s_RhsRpcCreateResType: ERROR_NOT_READY(21)' because of 'Startup routine for ResType MSMQ returned 21.'
00000730.000006d8::2011/01/13-16:10:40.912 WARN [RCM] Failed to load restype 'MSMQ': error 21.
00000b18.00000c1c::2011/01/13-16:10:40.912 ERR [RHS] s_RhsRpcCreateResType: ERROR_NOT_READY(21)' because of 'Startup routine for ResType MSMQTriggers returned 21.'
00000730.00000d30::2011/01/13-16:10:40.912 WARN [RCM] Failed to load restype 'MSMQTriggers': error 21.
00000730.00000d30::2011/01/13-16:10:40.912 WARN [RCM] rcm::RcmApi::ResTypeControl: ResType MSMQTriggers's DLL is not present on this node. Attempting to find a good node...
00000b18.00000c1c::2011/01/13-16:10:40.912 ERR [RHS] s_RhsRpcCreateResType: ERROR_NOT_READY(21)' because of 'Startup routine for ResType MSMQTriggers returned 21.'
00000730.000006d8::2011/01/13-16:10:40.912 WARN [RCM] Failed to load restype 'MSMQTriggers': error 21.
00000b18.00000c1c::2011/01/13-16:10:40.928 ERR [RHS] s_RhsRpcCreateResType: ERROR_NOT_READY(21)' because of 'Startup routine for ResType MSMQ returned 21.'
00000730.00000d30::2011/01/13-16:10:40.928 WARN [RCM] Failed to load restype 'MSMQ': error 21.
00000730.00000d30::2011/01/13-16:10:40.928 WARN [RCM] rcm::RcmApi::ResTypeControl: ResType MSMQ's DLL is not present on this node. Attempting to find a good node...
00000b18.00000c1c::2011/01/13-16:10:40.928 ERR [RHS] s_RhsRpcCreateResType: ERROR_NOT_READY(21)' because of 'Startup routine for ResType MSMQ returned 21.'
00000730.000006d8::2011/01/13-16:10:40.928 WARN [RCM] Failed to load restype 'MSMQ': error 21.
00000b18.00000c1c::2011/01/13-16:10:40.928 ERR [RHS] s_RhsRpcCreateResType: ERROR_NOT_READY(21)' because of 'Startup routine for ResType MSMQTriggers returned 21.'
00000730.00000d30::2011/01/13-16:10:40.928 WARN [RCM] Failed to load restype 'MSMQTriggers': error 21.
00000730.00000d30::2011/01/13-16:10:40.928 WARN [RCM] rcm::RcmApi::ResTypeControl: ResType MSMQTriggers's DLL is not present on this node. Attempting to find a good node...
00000b18.00000c1c::2011/01/13-16:10:40.928 ERR [RHS] s_RhsRpcCreateResType: ERROR_NOT_READY(21)' because of 'Startup routine for ResType MSMQTriggers returned 21.'
00000730.000006d8::2011/01/13-16:10:40.928 WARN [RCM] Failed to load restype 'MSMQTriggers': error 21.
00000b18.00000c1c::2011/01/13-16:10:40.943 ERR [RHS] s_RhsRpcCreateResType: ERROR_NOT_READY(21)' because of 'Startup routine for ResType MSMQ returned 21.'
00000730.00000d30::2011/01/13-16:10:40.943 WARN [RCM] Failed to load restype 'MSMQ': error 21.
00000730.00000d30::2011/01/13-16:10:40.943 WARN [RCM] rcm::RcmApi::ResTypeControl: ResType MSMQ's DLL is not present on this node. Attempting to find a good node...
00000b18.00000c1c::2011/01/13-16:10:40.943 ERR [RHS] s_RhsRpcCreateResType: ERROR_NOT_READY(21)' because of 'Startup routine for ResType MSMQ returned 21.'
00000730.000006d8::2011/01/13-16:10:40.943 WARN [RCM] Failed to load restype 'MSMQ': error 21.
00000b18.00000c1c::2011/01/13-16:10:40.943 ERR [RHS] s_RhsRpcCreateResType: ERROR_NOT_READY(21)' because of 'Startup routine for ResType MSMQTriggers returned 21.'
00000730.00000d30::2011/01/13-16:10:40.943 WARN [RCM] Failed to load restype 'MSMQTriggers': error 21.
00000730.00000d30::2011/01/13-16:10:40.943 WARN [RCM] rcm::RcmApi::ResTypeControl: ResType MSMQTriggers's DLL is not present on this node. Attempting to find a good node...
00000b18.00000c1c::2011/01/13-16:10:40.943 ERR [RHS] s_RhsRpcCreateResType: ERROR_NOT_READY(21)' because of 'Startup routine for ResType MSMQTriggers returned 21.'
00000730.000006d8::2011/01/13-16:10:40.943 WARN [RCM] Failed to load restype 'MSMQTriggers': error 21.
00000730.00000d30::2011/01/13-16:10:47.354 INFO [RCM] rcm::RcmApi::FailResource: (VM1)
00000730.00000d40::2011/01/13-16:10:47.354 INFO [RCM] HandleMonitorReply: FAILURENOTIFICATION for 'VM1', gen(3) result 0.
00000730.00000d40::2011/01/13-16:10:47.354 INFO [RCM] TransitionToState(VM1) Online-->ProcessingFailure.
00000730.00000d40::2011/01/13-16:10:47.354 INFO [RCM] rcm::RcmGroup::UpdateStateIfChanged: (Available Storage, Online --> Failed)
00000730.00000d40::2011/01/13-16:10:47.354 ERR [RCM] rcm::RcmResource::HandleFailure: (VM1)
00000730.00000d40::2011/01/13-16:10:47.354 INFO [RCM] resource VM1: failure count: 2, restartAction: 2.
00000730.00000d40::2011/01/13-16:10:47.354 INFO [RCM] TransitionToState(VM1) ProcessingFailure-->[WaitingToTerminate to Failed].
00000730.00000d40::2011/01/13-16:10:47.354 INFO [RCM] rcm::RcmGroup::UpdateStateIfChanged: (Available Storage, Failed --> Pending)
00000730.00000d40::2011/01/13-16:10:47.354 INFO [RCM] TransitionToState(VM1) [WaitingToTerminate to Failed]-->[Terminating to Failed].
00000bd4.00000eb0::2011/01/13-16:10:47.354 INFO [RES] Physical Disk <VM1>: Terminate request.
00000730.00000d40::2011/01/13-16:10:47.354 INFO [RCM] Resource VM1 is causing group Available Storage to failover. Posting worker thread.
00000730.00000d40::2011/01/13-16:10:47.354 INFO [RCM] rcm::RcmGroup::Failover: (Available Storage)
00000bd4.00000eb0::2011/01/13-16:10:47.417 WARN [RES] Physical Disk <VM1>: Terminate: Failed to offline volume \Device\Harddisk3\Partition1, Error 5
00000b18.00000c1c::2011/01/13-16:10:47.432 ERR [RHS] s_RhsRpcCreateResType: ERROR_NOT_READY(21)' because of 'Startup routine for ResType MSMQ returned 21.'
00000730.0000076c::2011/01/13-16:10:47.432 WARN [RCM] Failed to load restype 'MSMQ': error 21.
00000730.0000076c::2011/01/13-16:10:47.432 WARN [RCM] rcm::RcmApi::ResTypeControl: ResType MSMQ's DLL is not present on this node. Attempting to find a good node...
00000b18.00000c1c::2011/01/13-16:10:47.432 ERR [RHS] s_RhsRpcCreateResType: ERROR_NOT_READY(21)' because of 'Startup routine for ResType MSMQ returned 21.'
00000730.00000d30::2011/01/13-16:10:47.432 WARN [RCM] Failed to load restype 'MSMQ': error 21.
00000b18.00000c1c::2011/01/13-16:10:47.432 ERR [RHS] s_RhsRpcCreateResType: ERROR_NOT_READY(21)' because of 'Startup routine for ResType MSMQTriggers returned 21.'
00000730.0000076c::2011/01/13-16:10:47.432 WARN [RCM] Failed to load restype 'MSMQTriggers': error 21.
00000730.0000076c::2011/01/13-16:10:47.432 WARN [RCM] rcm::RcmApi::ResTypeControl: ResType MSMQTriggers's DLL is not present on this node. Attempting to find a good node...
00000b18.00000c1c::2011/01/13-16:10:47.432 ERR [RHS] s_RhsRpcCreateResType: ERROR_NOT_READY(21)' because of 'Startup routine for ResType MSMQTriggers returned 21.'
00000730.00000d30::2011/01/13-16:10:47.432 WARN [RCM] Failed to load restype 'MSMQTriggers': error 21.
00000b18.00000c1c::2011/01/13-16:10:47.432 ERR [RHS] s_RhsRpcCreateResType: ERROR_NOT_READY(21)' because of 'Startup routine for ResType MSMQ returned 21.'
00000730.0000076c::2011/01/13-16:10:47.432 WARN [RCM] Failed to load restype 'MSMQ': error 21.
00000730.0000076c::2011/01/13-16:10:47.432 WARN [RCM] rcm::RcmApi::ResTypeControl: ResType MSMQ's DLL is not present on this node. Attempting to find a good node...
00000b18.00000c1c::2011/01/13-16:10:47.448 ERR [RHS] s_RhsRpcCreateResType: ERROR_NOT_READY(21)' because of 'Startup routine for ResType MSMQ returned 21.'
00000730.00000d30::2011/01/13-16:10:47.448 WARN [RCM] Failed to load restype 'MSMQ': error 21.
00000b18.00000c1c::2011/01/13-16:10:47.448 ERR [RHS] s_RhsRpcCreateResType: ERROR_NOT_READY(21)' because of 'Startup routine for ResType MSMQTriggers returned 21.'
00000730.0000076c::2011/01/13-16:10:47.448 WARN [RCM] Failed to load restype 'MSMQTriggers': error 21.
00000730.0000076c::2011/01/13-16:10:47.448 WARN [RCM] rcm::RcmApi::ResTypeControl: ResType MSMQTriggers's DLL is not present on this node. Attempting to find a good node...
00000b18.00000c1c::2011/01/13-16:10:47.448 ERR [RHS] s_RhsRpcCreateResType: ERROR_NOT_READY(21)' because of 'Startup routine for ResType MSMQTriggers returned 21.'
00000730.00000d30::2011/01/13-16:10:47.448 WARN [RCM] Failed to load restype 'MSMQTriggers': error 21.
00000bd4.00000eb0::2011/01/13-16:10:47.666 INFO [RES] Physical Disk <VM1>: HardDiskpCloseSVIHandles: Exit
00000bd4.00000eb0::2011/01/13-16:10:48.259 INFO [RES] Physical Disk: ReleaseDisk: stop reserve succeeded on device 3 (sig 44423655)
00000730.0000076c::2011/01/13-16:10:48.368 INFO [RCM] HandleMonitorReply: TERMINATERESOURCE for 'VM1', gen(4) result 0.
00000730.0000076c::2011/01/13-16:10:48.368 INFO [RCM] TransitionToState(VM1) [Terminating to Failed]-->Failed.
00000730.0000076c::2011/01/13-16:10:48.368 INFO [RCM] rcm::RcmGroup::UpdateStateIfChanged: (Available Storage, Pending --> Failed)
00000730.00000d40::2011/01/13-16:10:48.384 WARN [RCM] Not failing over group Available Storage, failoverCount 1, failover threshold 0, nodeAvailCount 0.
00000730.00000d40::2011/01/13-16:10:48.384 INFO [RCM] Will retry online of VM1 in 3600000 milliseconds.
00000b18.00000c1c::2011/01/13-16:10:48.384 ERR [RHS] s_RhsRpcCreateResType: ERROR_NOT_READY(21)' because of 'Startup routine for ResType MSMQ returned 21.'
00000730.00000d40::2011/01/13-16:10:48.384 WARN [RCM] Failed to load restype 'MSMQ': error 21.
00000730.00000d40::2011/01/13-16:10:48.384 WARN [RCM] rcm::RcmApi::ResTypeControl: ResType MSMQ's DLL is not present on this node. Attempting to find a good node...
00000b18.00000c1c::2011/01/13-16:10:48.384 ERR [RHS] s_RhsRpcCreateResType: ERROR_NOT_READY(21)' because of 'Startup routine for ResType MSMQ returned 21.'
00000730.0000076c::2011/01/13-16:10:48.384 WARN [RCM] Failed to load restype 'MSMQ': error 21.
00000b18.00000c1c::2011/01/13-16:10:48.400 ERR [RHS] s_RhsRpcCreateResType: ERROR_NOT_READY(21)' because of 'Startup routine for ResType MSMQTriggers returned 21.'
00000730.00000d40::2011/01/13-16:10:48.400 WARN [RCM] Failed to load restype 'MSMQTriggers': error 21.
00000730.00000d40::2011/01/13-16:10:48.400 WARN [RCM] rcm::RcmApi::ResTypeControl: ResType MSMQTriggers's DLL is not present on this node. Attempting to find a good node...
00000b18.00000c1c::2011/01/13-16:10:48.400 ERR [RHS] s_RhsRpcCreateResType: ERROR_NOT_READY(21)' because of 'Startup routine for ResType MSMQTriggers returned 21.'
00000730.0000076c::2011/01/13-16:10:48.400 WARN [RCM] Failed to load restype 'MSMQTriggers': error 21.
00000b18.00000c1c::2011/01/13-16:10:48.400 ERR [RHS] s_RhsRpcCreateResType: ERROR_NOT_READY(21)' because of 'Startup routine for ResType MSMQ returned 21.'
00000730.00000d40::2011/01/13-16:10:48.400 WARN [RCM] Failed to load restype 'MSMQ': error 21.
00000730.00000d40::2011/01/13-16:10:48.400 WARN [RCM] rcm::RcmApi::ResTypeControl: ResType MSMQ's DLL is not present on this node. Attempting to find a good node...
00000b18.00000c1c::2011/01/13-16:10:48.400 ERR [RHS] s_RhsRpcCreateResType: ERROR_NOT_READY(21)' because of 'Startup routine for ResType MSMQ returned 21.'
00000730.0000076c::2011/01/13-16:10:48.400 WARN [RCM] Failed to load restype 'MSMQ': error 21.
00000b18.00000c1c::2011/01/13-16:10:48.400 ERR [RHS] s_RhsRpcCreateResType: ERROR_NOT_READY(21)' because of 'Startup routine for ResType MSMQTriggers returned 21.'
00000730.00000d40::2011/01/13-16:10:48.400 WARN [RCM] Failed to load restype 'MSMQTriggers': error 21.
00000730.00000d40::2011/01/13-16:10:48.400 WARN [RCM] rcm::RcmApi::ResTypeControl: ResType MSMQTriggers's DLL is not present on this node. Attempting to find a good node...
00000b18.00000c1c::2011/01/13-16:10:48.400 ERR [RHS] s_RhsRpcCreateResType: ERROR_NOT_READY(21)' because of 'Startup routine for ResType MSMQTriggers returned 21.'
00000730.0000076c::2011/01/13-16:10:48.400 WARN [RCM] Failed to load restype 'MSMQTriggers': error 21.

Thanks Ramzan and Elden for your reply. :) :)
Issue Faced:
we have 3 cluster server(2008 enterprise R2). The cluster server gets rebooted and failover happens frequently.As a workaround,we use to unistall Network threat component(symantec) when the issue happens.
The Cluster validation passes sucessfully for both storage and network.
I dont find any logs apart from the below.
00000d38.00000698::2011/04/15-20:04:38.452 ERR [RHS] s_RhsRpcCreateResType: ERROR_NOT_READY(21)' because of 'Startup routine for ResType MSMQ returned 21.'
00000984.00000d88::2011/04/15-20:04:38.452 WARN [RCM] Failed to load restype 'MSMQ': error 21.
00000d38.00000698::2011/04/15-20:04:38.467 ERR [RHS] s_RhsRpcCreateResType: ERROR_NOT_READY(21)' because of 'Startup routine for ResType MSMQTriggers returned 21.'
00000984.000012f0::2011/04/15-20:04:38.467 WARN [RCM] Failed to load restype 'MSMQTriggers': error 21.
00000984.000012f0::2011/04/15-20:04:38.467 WARN [RCM] rcm::RcmApi::ResTypeControl: ResType MSMQTriggers's DLL is not present on this node.
Attempting to find a good node...
We collected the bugcheck analysis report after the reboot. The report as follows
MM_INTERNAL_CODE: 0
DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT
BUGCHECK_STR: 0x50
PROCESS_NAME: svchost.exe
CURRENT_IRQL: 0
STACK_COMMAND: kb
FOLLOWUP_IP:
srvnet!FillSessionInfoBuffer+a2
fffff880`05472ed2 448b9c2480000000 mov r11d,dword ptr [rsp+80h]
SYMBOL_STACK_INDEX: 4
SYMBOL_NAME: srvnet!FillSessionInfoBuffer+a2
FOLLOWUP_NAME: MachineOwner
MODULE_NAME: srvnet
IMAGE_NAME: srvnet.sys
DEBUG_FLR_IMAGE_TIMESTAMP: 4c7732f4
FAILURE_BUCKET_ID: X64_0x50_srvnet!FillSessionInfoBuffer+a2
BUCKET_ID: X64_0x50_srvnet!FillSessionInfoBuffer+a2
Followup: MachineOwner
As per microsoft technet, we are planning to deploy the hotfix provided in the article
http://support.microsoft.com/kb/980135
Please let us know if another troubleshooting steps needs to be performed. Any solutions please let us know
Thanks
Dinesh

ECC 6.0 upgrade problem with outbound idocs

We are currently in the process of upgrading from 4.6C to ECC 6 and have found that our outbound idocs that use to process immediately are now pending in status 30. Message type DEBMDM is one of the several outbound messages that has the issue. Any ideas of what may have changed between 4.6C and ECC 6 that may have caused this to occur?

Hi Boss,
This problem is with Upgrading only . so, i can give two solutions for this .
1. create Background job with RSEOUT00 Executable program
and give the time like 2 min or 5 min (your choice)
2. check your code like includes in that code call the two Function modules that is DB_COMMIT
DEQUEUE_ALL
Try with this,,,,,,,,,,,,,
Best Regards,
Narasimha Rao.

Unity 4.2(1) Failover Problems

I was contacted about a Unity 4.2(1) problem someone was having last week. From my initial investigation, it appears that failover is not working at all., due to the fact SQL replication is broken. The event log is logging the error "SQL Server replication between the primary and secondary machines is inactive. The subscription to UnityDbPublication is not active or pending. Recreat the subscription and the publication snapshot to restore replication.
When I go to the UnityDbPublication:UnityDB under Publications in SQL Server Enterprise Manager, I get the error "SQL Server replication does not support nicknames, such as "." or "(local)". as server names. Delete the SQL Server registration for this server and register it using the actual server name..
I found this article that appears to be the solution to that error: http://www.cisco.com/en/US/products/sw/voicesw/ps2237/products_tech_note09186a0080943cb3.shtml#topic2
In SQL Server Enterprise Manager, the server is named (local). Deleting (local) will not delete the database, correct? I don't want to crash the whole system. Should I do this on both servers (both are named (local)).
Is this the best place to start to repair the replication between the 2 servers? I ran DBWalker on both servers and the primary server only logged 5 errors while the secondary server logged 307 errors (mostly missing WAV files).
Any input would be appreciated. Thanks!

Dear
Please find the below lik which wll help you to install failoveer , but please be carefull and stop the subscriber when you run failover on the publisher.
http://www.cisco.com/image/gif/paws/26060/unity_failover_config.pdf
thank you
please rate if this will help

Change my sid ecc to pcc causes problems...

when i am going to change my sid ecc to pcc
then i found a problem
when i up my mmc
start pcc(SID) get an error
get processes list failed 80010105
the server threw an exception.
what can i do
Edited by: Julius Bussche on Nov 3, 2008 1:39 PM

The ONLY supported way to change the SAP SID is to make a system copy (either homogeneous or heterogeneous), so you will have to follow the guidelines given in the respective installations guide and sapnotes!
Check System Copy and Migration
GreetZ, AH

Oracle HA Failover problem

Hi,
Just want to know if anyone has encountered problem starting multiple oracle instance on the same node under sun cluster. It complains it can not start listener for the new instance. We used different listener port/name for the new instance.
Any help would be greatly appreciated.
Thanks.

Hi,
Just want to know if anyone has encountered problem starting multiple oracle instance on the same node under sun cluster. It complains it can not start listener for the new instance. We used different listener port/name for the new instance.
Any help would be greatly appreciated.
Thanks.

System font failover problem

I have a Flex 3 application, where Burmese and Thai device fonts are rendering OK in Flex3 text controls (e.g. mx Label, TextInput), but not in FTE-based text controls (e.g. flashx TextLine).
However, certain fonts including Chinese, Arabic and Hebrew all failover correctly in both types of text control.
Are there known issues or specific font sets not supported for failover to system fomts?
I'm currently testing with Player 10.3 on Mac in Safari/Chrome/FF.

Hi Dave,
Would you mind creating a jira bug for this?
http://bugs.adobe.com/flashplayer/
Thanks,
Chris

ECC 6.0 failover problem

Similar Messages

Maybe you are looking for