ECC6 and Sol Man on same host

Dear All,
1. I want to install SolMan on Solaris 10. Please guide me from start..
2. I want to install SolMan and ECC6 on the same host. What is the procedure I need to follow( I mean from creating the LV ..)
Please guide.

1. I want to install SolMan on Solaris 10. Please guide me from start..
Use the official installation guides, they contain everything you need
http://service.sap.com/instguides
2. I want to install SolMan and ECC6 on the same host. What is the procedure I need to follow( I mean from creating the LV ..)
This is also covered in the guides.
Are you going to use VxFS? If you´re on Solaris 10 try ZFS - MUCH easier to configure and handle!
Markus

Similar Messages

Latest DVDs of Support Package Stack for NW7.0, ERP 6.0, and Sol Man. 4.0

Hi all,
I want to request SAP the latest DVDs of Support Package Stack for NW7.0, ERP 6.0, and Sol Man. 4.0, is it possible & how to do it?
Thanks,
Toan Do

Hi Toan,
It's possible to order them or download them from SAP Marketplace
http://service.sap.com/swdc
Regards
Juan

Central NetWeaver Installation and DB Instance on same host?

HI all,
Would like to ask a question about NetWeaver installation.
If I choose central installation, means Central Service Instance, DB Instance and Central Instance will be on the same host, but can my DB, say SQL Server reside on separate host?
If not, is it correct that I have to choose distributed installation? So if distributed installation, can I install Central Service instance and Central intance on one host, and DB instance and SQL Server on another host?
Thanks,
Kelvin

Hi KL:
You can get this answer directly from the Installation Guides.
You can download the installation guides for NetWeaver under: https://service.sap.com/instguides
Hope this helps!
Regards,
Federico G. Babelis
NetWeaver Certified Consultant
http://www.gazum.com

How to install infra and ias( bi) on same host?

I can install and run infrastructure, but when i install the ias( with bi option) on the same machine( host), the error linking a taget runm_install of ... ins_reports appears.
How to resolve?
Thanks.

Make sure you have separate ORACLE_HOME for infra and midtier.
RP

ECC 6.0 and Sol Man 7.0 support on Windows Server 32 bit OS

Dear Experts,
I have read that SAP is moving towards 64 bit implementation.
I have to install ECC 6.0 and Solution Manager 7.0 on a Windows Server. We have yet to purchase the hardware and to decide the hardware config I need answers to the following.
Is ECC 6.0 and Solution Manager 7.0 supported on Windows 2003 server 32 bit OS?
Should I buy 64 bit hardware for both or should I go for 32 bit hardware?
Thanks and Regards,
Shailendra

> No Need to buy 64bit hardware.
You're aware that successor releases are only available on 64bit? And also the fact, that certain functionality may not work in Solution Manager (e. g. activation of BI cubes etc.)? If he wants to go for EHP4 on ERP he needs to install EHP3 first and then EHP4 using SAINT - which needs a lot of downtime.
SAP recommends using only 64bit system and I can just HIGHLY support that:
Note 931024 - FAQ: 64-bit platforms for Windows
<...>
As of basis release 6.20 productive use of 32-bit platforms is not recommended.
<...>
and
Note 1280759 - SAP recommends only 64-Bit Windows for SAP Appl. Servers
<...>
Therefore, we recommend that you only use 64-bit for your SAP system. Use Windows 64-bit also on small test and demo systems to become familiar with it. Otherwise you will end up wasting a lot of time and money optimizing your ABAP or Java application servers to run on 32-bit.
<...>
Almost all servers produced in the last two years are 64bit capable - so I'd check if the server really doesn't support a 64bit OS.
Markus

Production and development OBIEE on same host

Hi!
I have a problem!
I installed with different users (oracle and bitest) one ias 10.1.3.1 and BIEE 10.1.3.3.2. The installation finished successfull without errors and warnings. I can start The IAS instances successfull and they work fine. But. I set the port of first nqserver to 9713 and the seconds 9703 on the NQSconfig.ini and I set the odbc.ini too. So, I start the first nqserver on 9713 works fine, but both IAS instance connect to that (run on 9713) nqserver. I don't know, did I set the all parameters perfectly?
Pls Help!
Thanks!

user12145827 wrote:
I have a production database that move every six months to warehouse where it is stored for history record., there will not be much intraction with production to warehouse. But both databases are exists in one server. I would like to know what is the best practice, since oracle recommending keep one database for one server.----
Read following link that solve your problem.:
http://asktom.oracle.com/pls/asktom/f?p=100:11:0::::P11_QUESTION_ID:316916600346973310

Nexus 1000V - port-profile for VSM and VEM on same host

Hello,
I'm trying to run the VSM and VEM on the same host. At first I connected the VSM to the vSwitch. This works fine. Then I tried to move the VSM behind its own VEM.
I have 3 different VLANs for management, control and packet traffic. Is it possible to connect the three VSM interfaces (management, control and packet) to only one port-profile, in which these three different VLANs are configured in a trunk? Or do I have to configure for each interface a separate port-profile, if I am using three different VLANs?
Thanks
Tobias

Hello,
The VSM does not emit VLAN-tagged frames. Therefore, its ports need to be configured in access mode. If your Control and Packet VLANs are the same, you could use the same port profile for both.
Please make sure that the access VLAN is a system VLAN for all three ports.
On a related note, if the VSM's storage is on NFS or iSCSI, the storage vmknic needs a system port profile as well. More info at:
http://www.cisco.com/en/US/docs/switches/datacenter/nexus1000/sw/4_0_4_s_v_1_3/getting_started/configuration/guide/n1000v_gsg_5vsm_behind_vem.html

Start/stop the OMS Services on Same Host

Hi,
I have OMS, Repository database and Agent on the same host.....
I want to stop and start the services...
==========================
FOR Shutdown
=====================================
Stop the Agent
$cd $ORACLE_HOME/agent10g/bin/emctl stop agent
stop the OMS Services
$cd $ORACLE_HOME/oms10g/opmn/bin/opmnctl stopall
Stop the Repository Databas Listner
$cd $ORACLE_HOME/bin/lsnrctl stop LISTENER
STOP THE database
$cd $ORACLE_HOME/bin/sqlplus '/as sysdba'
sql> shutdown immediate
====================================
FOR Startup
=====================================
start the Repository Listener
$cd $ORACLE_HOME/bin/lsnrctl start LISTENER
start the Database
$cd $ORACLE_HOME/bin/sqlplus '/as sysdba'
sql> startup
start the OMS Service
$cd $ORACLE_HOME/oms10g/opmn/bin/opmnctl startall
start the Management Agent
$cd $ORACLE_HOME/agent10g/bin/emctl start agent
======================================
is this the correct procedure...
can anybody help in this regard....

As an outline, it looks ok I think.
You may need some env variables set up in the script, add some error handling, etc...
I want to stop and start the services...
$cd $ORACLE_HOME/agent10g/bin/emctl stop agent
$cd $ORACLE_HOME/oms10g/opmn/bin/opmnctl stopallRemove the "cd" from your command lines.

Calendar Server and Email Server on Same Machine - Email Issue

Hi.
I've installed email and calendar on the same host. The email domain for test purposes is the name of the machine. I noticed in the configuration guide, it says that if you put the calendar server and email server on the same machine you need to configure sendmail.cf and modify incoming rules in order to get email reminders from Calendar to Email. I have done this but am still not able to. I get the emails kicked back to root and they say:
553 5.3.5 System Config Errors
553 5.3.5 <machine name> config error: mail loops back to me (MX problem?)
Has someone seen this before?
Thank You,
Matt

Hi Russ,
We have the same problem as Matt.
We have properly set up OCS Email it works well both inside and outside our network.
The only thing that appears not to be working is the email notification capabilities of OCS Calendar.
We have changed sendmail.cf as stated in the documentantion.
we are using -
RedHat Advanced Server 2.1,
sendmail 8.11.6
bind 9.1.3
I would be very gratefull of any information on this, as we're out of ideas...

Running Sun App Server 7 and 8 on the same box

Hello,
Are there any known issues with running Sun App Server 7 and 8 in the same host box ? Currently I am encountering some class not found exceptions with Sun App Server 8 . Sun App Server 7 runs just fine.
Thanks,
Aswin.

It's not advisable to run separate installations of
ColdFusion 7 and ColdFusion 8 single server on the same machine the
re are several services that will try to use the same ports.
However, you can install ColdFusion Enterprise using the
multi-server configuration and then deploy the J2EE versions of
ColdFusion to JRun. You can change the JVM that each instance uses
(we recommend the latest 1.4 for CF7 and the latest 1.6 for CF8),
and everything should run fine.
ColdFusion itself is essentially just a J2EE application, the
J2EE server itself is JRun 4. So the specific answer to your
question is "don't install 2 copies of JRun 4 to the same machine".
But yes, it's 100% possible, I'm running this configuration in my
own development environment.

Is the 1000v supported on the same hosts it manages yet?

Question posted to our Twitter account from @SlackerUK
"Is the 1000v supported on the same hosts it manages yet? Thanks"

http://www.cisco.com/en/US/docs/switches/datacenter/nexus1000/sw/4_0_4_s_v_1_3/getting_started/configuration/guide/n1000v_gsg.pdf
Chapter 5: Running a VSM and VEM on the Same Host
/Prasad.

How to Create Primary DB and Physical/Logical Standby DB on the same host?

Now I encounter a issue. I want to create one Primary DB and one Physical standby DB and one Logical standby DB on the same host.
Create this env on the same host aims to test whether we can using EM Patching DP to apply patches on Primary/Physical/Logical DB successfully.
I try to setup this env but fails. I want to know more related issues about create Primary DB /Physical DB/Logical DB on the same host and how to configure between them.
Below steps is my try:
1. Create Primary DB on the /scratch/primary_db
2. Create Physical Db software only on the /scratch/physical_db
3. Create Logical Db software only on the /scratch/logical_db
4. Using EM Wizard to create physical standby database and logical standby database, and these two targets can show up on the "All Targets" Page.
5. But when using EM Patching DP, it fails and the reason is the listener of physical and logical db cannot configured well.
Issues:
So I want to know about how to configure physical db and logical db's listener using EM or manually?
If the listener name of Primary Db is LISTENER and the port is 1521,and the listener.ora is under the /scratch/primary_db/network/admin directory, then how to config physical db and logical db's listener's name and port?

Hi,
As this a test case then you need to create two more listener for each Oracle Home (/scratch/physical_db & /scratch/logical_db) make sure that they have different names and ports.
Then add the new listeners manually using GC?
Try it and let me know
Regards
Amin

Sol Man 4.0 and Test Director 8.0

Hi,
We currently run Mercury's Test Director 8.0 (SP2) where we store all of our manual and automated test scripts.
We are also planning to use our Solution Manager 4.0 to create our project, our blueprint/configuration and from there on link our test cases to the process steps.
I've read that there is integration between Test Director.
What I'm looking for is that since all of our test scripts are stored in Test Director, is it possible to link those individual scripts to each process steps.
In the Test Case tab of Sol Man, there is the Test Case Type column with several options. If I select "Test document" and use "Web Link" to link to the test script, it would only bring me to the log-on page of Test Director upon which I would need to log-on and then search the Test lab for my script.
Just wondering if there's a way to accomplish (without downloading all of our scripts from Test Director and then uploading them to Sol Man.
Any thoughts would be appreciated.
Thanks
Danielle

Daniella,
Please take a look at this thread.This might help you how to integrate Sol Mngr with Test Director.
Solution Manager integration with Mercury product
Thanks
Sudhan Shan

Sol Man 4.0 and Reporting out to BW

We have upgraded to Sol Man 4.0 and need to report the Change Request info, Change Document info and Transports log using an external BW box. In researching this forum, I have learned that we can export data out by activating the CRM business content. I need more guidance as to what DataSources to use. So far we have activated and found data in <b>0CRM_SRV_PROCESS_H</b> and <b>0CRM_SALES_ACT_1</b>, but I am missing information such as Change Advisory Board, Subject, External Reference, Decision Date, and Implementation date to name a few. Can anyone help? Is this documented ANYWHERE?? Thank you.
Charis Davenport
Project Management Specialist
The Walt Disney Company

Daniella,
Please take a look at this thread.This might help you how to integrate Sol Mngr with Test Director.
Solution Manager integration with Mercury product
Thanks
Sudhan Shan

Integration SAP Sol Man Service Desk and HP OV Service Desk

Hi!
We have installed SAP SM 4.0 and we also use HP OV Service Desk 4.5.And now we want to integrate both this solution.
As I understand, the interaction is realised wia web interface
In pdf file "Incident Exchange Service between HP OpenView Service Desk 4.5 and SAP Solution Manager 4.0 Service Desk" I have read what needed interface (or service) is integrated to the HP OV SD. But our administrator of HP OpenView Service
Desk sad that where no this srvice.
Are anybody know how to integrate SAP Sol Man Service Desk and HP OV Service Desk?

Hello - the document is located at http://service.sap.com/solutionmanager - media library - technical papers - Service Desk WebServices API.
However, HP is CERTIFIED by SAP to connect to this SOAP interface - the only vendor so far (Remedy and Peregrine are in process.) HP has tested this interface at SAP and recieved certification several months ago.
I would have your HP person escalate this issue higher in HP.

ECC6 and Sol Man on same host

Similar Messages

Maybe you are looking for