Echo From Setting Change in Speakers Mic

Running HP Notebook, all was w-ll tell I changed a setting after using USB plug-in speakers just fine for months.  THEY now resinate or squelch my voice as though a high pitched microphone... My voice never came thru them initially at all.  The mic on the computer picked up my voice for audio....Now I can't seem to change any setting to (a) restore my original setting and ( b) to use the speakers at all without the sound of echo squelch of my voice and even with silence....so no use of speakers at all.  They plug via usb and the mic or headphone jack at front of the laptop.  Any help out there??? What did I do?   Thanks!

Hi,
  First of all we can't do any changes in production system. System will not allow to do the changes it will give the prompt disply only.
Regarding performance it will decrease the system system performance because of SID's .
data deletion is not required once you will do this change the dso will available for reporting..
Hope this is clear..
Regards,
Raj.

Similar Messages

  • I have jumped from 5.1 to CC. When I open a file originated in illustrator 5.1 in CC it changes the CMYK breakdown. Have tried colour setting changes in Bridge but still have differences. Help!

    I have jumped from 5.1 to CC. When I open a file originated in illustrator 5.1 in CC it changes the CMYK breakdown. Have tried colour setting changes in Bridge but still have differences. Help!

    Any warnings when opening the file?
    You might need to reset all warnings in preferences.
    Apart from that itlooks like your color management settings are set to convert into profile. This is absolutely not advisable.

  • HT2494 Good afternoon, I have a set of 5 speakers + 1 subwoofer 5.1 from Altec Lansing and I would like to connect the 3 cables - 1 black + 1 yellow + 1 green - to my new i-mac. What connection type do I need? And where I can connect it? BR Pascal

    Good afternoon,
    I have a set of 5 speakers and 1 subwoofer 5.1 from Altec Lansing and I would like to connect the 3 exit cables  - 1 black + 1 green + 1 yellow - to my new i-mac 22" - acquired last week - equipped with only 4 USB 3.0 + 2 Thunderbolt + 1 Ethernet + 1 jack for micro or speaker.
    What connector type do I need? And where can I connect ot?
    Many thanks in advance for your help
    Best regards
    Pascal Quennesson

    Sorry you cannot
    That speaker system is for sound cards on PC's which separate the channels, the Mac's don't seperate the channels or decode surround sound formats  and only pass the 5.1 through the dual analog/optical stereo mini port.
    You might find a external device that accepts Toslink optical inputs and then separates the channels and sends the appropriate signal to the powered speakers.

  • When I stream music from my MacBook to speakers via airport sound stutters on and off. When I do so from iPhone all is fine.  Can't seem to find any settings to change   Tried to shut off firewall but settings will not let me.  All software up to date.

    When I stream music from my MacBook to speakers via airport sound stutters on and off. When I do so from iPhone all is fine.  Can't seem to find any settings to change   Tried to shut off firewall but settings will not let me.  All software up to date. Thanks for any suggestions

    2. not that I know of
    been looking for something a bit like it got an old ipod thouch in a audio dock in the kitchen and want to give it access to all my music not just play what is synced
    so far my only options is to get an app to use upnp to get the music directly from my nas
    or get some app which require the computer to be running and running some program to handle it
    and as far as I can tell getting access to stuff synced on the atv is a no go

  • Remote.app on iPod Touch can't change AppleTV speakers after 3.02 update

    I cannot find the menu in Remote for changing the speakers that AppleTV plays to. Updated to 3.02 yesterday; before that all was well - so much so that I can't remember exactly where the option was. If I'm overlooking something please let me know!
    Don't know if this is related, but the "More" button in Remote doesn't do anything anymore.

    "More" is working - my mistake.
    I thought Speakers must have been in the "More" menu, but I was already seeing the More menu with its Audiobooks, TV Shows, and whatever isn't in the row of icons at the bottom of the screen.
    So after a few hours' break, the answer became obvious: Press & hold on the Now Playing screen (the album cover of the current song) to pop up the Speakers menu. (On the AppleTV you hold down Menu when a song is playing to get to the speaker options, among others.)
    I've got 2 Airport Express units with speakers attached, so with those and the ATV itself the Speakers option brings up 3 sets of speakers that can be turned on or off.

  • HT4587 Hi, I want to set up a sound system in a new house using apple equipment. I have few sets of Bose speakers that I would like to utilise, my question is - what do I need to set it up and how do I do it with regards to  AirPlay? Thanks

    Hi, new to the forums and apple tbh.
    Moving into a new house and want to set up a sound system, thought apple would be the way to go as I have iPads, iPhones, iPod touch and nanos. I also have a few sets of Bose speakers which I would like to incorporate. What I am wondering is, what else do I need to buy to do this? Do I need seperate devices to attach to each speaker? Do I need a new router? And how would I configure it?
    Ideally I would like 4 rooms each with their own speakers that could play simultaneously.
    Thanks in advance!!!!

    First, please check out the following Apple Support article for details on setting up an AirPort Express Base Station (AX) for iTunes streaming. Note: You will need a separate AX for each set of speakers that you want to stream to. Also, note that you can stream a single audio file to one or more speakers, but you cannot stream separate audio files to different speakers simultaneously.
    Second, the Bose speakers you mentioned would need to have an audio input jack, either analog or optical digital to receive the stream from the AX. As you know, Bose makes a number of different speaker/home theatre audio options. If your specific model of speakers do, then it's just a matter to use the appropriate audio cable between the audio port of the AX and the speakers.

  • Is it possible to create a view where table in the From clause changes name

    is it possible to create a view from a from a table like this
    create view my_view as select id, col1, col2, result from <<my_latest_cacahe_table>>;
    the table in the from clause changes the name .
    I have another table which indicates the the latest name of my cache tables. Always there are two records there. The latest one and previous one.
    select * from cache_table_def
    table_name cache_table_name refresh_date
    my_table cache_table245 1/23/2012
    my_table cache_table235 1/22/2012
    create table cache_table_def (table_name varchar2(25), cache_table_name varchar2(25), refresh_date date);
    insert into cache_table_def values( 'my_table','cache_table245','23-jan-2012');
    insert into cache_table_def values ( 'my_table','cache_table546','22-jan-2012');
    create table cache_table245 (id number, col1 varchar2(50), col2 varchar2(20), result number);
    insert into cache_table245 values(1, 'test123', 'test345',12.12);
    insert into cache_table245 values (2, 'test223', 'test245',112.12);
    create table cache_table235 (id number, col1 varchar2(50), col2 varchar2(20), result number);
    insert into cache_table235 values (1, 'test123', 'test345',92.12);
    insert into cache_table235 values (2, 'test223', 'test245',222.12);
    what I need to do is find the latest cache_table name for my_table and use that in my view defintion
    When user select from the the view it always reurns the data from the latest cache_table
    is it possible to do something like this in oracle 11g?
    I have no control on the cache tables names. that is why I need to use the latest name from the table.
    Any ideas really appreciated.

    I've worked up an example that does what you ask. It uses the SCOTT schema EMP table. Make two copies of the EMP table, EMP1 and EMP2. I deleted dept 20 from emp1 and deleted dept 30 from emp2 so I could see that the result set really came from a different table.
    -- create a context to hold an environment variable - this will be the table name we want the view to query from
    create or replace context VIEW_CTX using SET_VIEW_FLAG;
    -- create the procedure specified for the context
    - we will pass in the name of the table to query from
    create or replace procedure SET_VIEW_FLAG ( p_table_name in varchar2 default 'EMP')
      as
      begin
          dbms_session.set_context( 'VIEW_CTX', 'TABLE_NAME', upper(p_table_name));
      end;
    -- these are the three queries - one for each table - none of them will return data until you set the context variable.
    select * from emp where 'EMP' = sys_context( 'VIEW_CTX', 'TABLE_NAME' );
    select * from emp1 where 'EMP1' = sys_context( 'VIEW_CTX', 'TABLE_NAME' );
    select * from emp2 where 'EMP2' =  sys_context( 'VIEW_CTX', 'TABLE_NAME' )
    -- this is how you set the context variable depending on the table you want the view to query
    exec set_view_flag( p_table_name => 'EMP' );
    exec set_view_flag( p_table_name => 'EMP1' );
    exec set_view_flag( p_table_name => 'EMP2');
    -- this will show you the current value of the context variable
    SELECT sys_context( 'VIEW_CTX', 'TABLE_NAME' ) FROM DUAL
    -- this is the view definition - it does a UNION ALL of the three queries but only one will actually return data
    CREATE VIEW THREE_TABLE_EMP_VIEW AS
    select * from emp where 'EMP' = sys_context( 'VIEW_CTX', 'TABLE_NAME' )
    union all
    select * from emp1 where 'EMP1' = sys_context( 'VIEW_CTX', 'TABLE_NAME' )
    union all
    select * from emp2 where 'EMP2' =  sys_context( 'VIEW_CTX', 'TABLE_NAME' )
    -- first time - no data since context variable hasn't been set yet
    SELECT * FROM THREE_TABLE_EMP_VIEW
    -- get data from the EMP table
    exec set_view_flag( p_table_name => 'EMP' );
    SELECT * FROM THREE_TABLE_EMP_VIEW
    -- get data from the EMP2 table
    exec set_view_flag( p_table_name => 'EMP2');
    SELECT * FROM THREE_TABLE_EMP_VIEW
    For your use case you just have to call the context procedure whenever you want to switch tables. You can union all as many queries as you want and can even put WHERE clause conditions based on other filtering criteria if you want. I have used this approach with report views so that one view can be used to roll up report data different ways or for different regions, report periods (weekly, quarterly, etc). I usually use this in a stored procedure that returns a REF CURSOR to the client. The client requests a weekly report and provides a date, the procedure calculates the START/END date based on the one date provided and sets context variables that the view uses in the WHERE clause for filtering.
    For reporting it works great!                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                               

  • Can I pair and use more than one set of bluetooth speakers at the same time on my ipod touch 4.0

    can I pair and use more than one set of bluetooth speakers at the same time on my ipod touch 4.0 or Iphone 4s or Ipad 2?

    You can only connect to one device at a time using Bluetooth, See article below for more information.
    http://support.apple.com/kb/ht1664
    While your iOS device can maintain multiple pairing records, it can only connect to one headset or hands-free device at a time. This prevents your iOS device from sending your data to the wrong Bluetooth accessory.

  • Creation of Idocs from the change pointers by the program RBDMIDOC

    Hello,
    I'm Creating Idocs from the change pointers by the program RBDMIDOC.
    The IDOCS Created using the message type HRMD_A are Correct but when i try to RUN RBDMIDOC for message type HRMD_B no Data is selected for distribution.
    All the customizing are similar and i presume that all the change pointers are active (BD50 and IMG->Personnel Management -> Organizational Management  -> Basic Settings -> Activate change documents).
    Can anyone help me with the necessary steps to create this IDOC types.
    Do anyone know if the RBDMIDOC report is the Same for messages HRMD_A and HRMD_B.
    Thanks in Advance,
    Pedro Ferreira

    If the setting is fine, there may be some code in exit or badi for program RBMIDOC. Check the Exit and BADI.
    check the exit EXIT_SAPLBD11_001 and
    check the badi IDOC_CREATION_CHECK.
    Probably there may be some code on these exits which are stoping your code from getting generated.These are the two trigger happen once u execute the RBMIDOC program.for HR, we use RHALEINI program to generate the idoc. but even RBDMIDOC works. These 2 triggere will come with RHALEINI also.
    If there is no code here, Then there is problem in the setting only.

  • How do I stop iTunes from automatically changing artist, album.....?

    How do I stop iTunes from automatically changing artist, album, and genre names?
    I keep my itunes library folder very organized. You wont find the same artist spelled two different ways in it. But itunes automatically changes the artists, album names, and genres for whatever reason, making it so I have to edit my library all over again.

    No, don't check it!
    That is the only setting that would let itunes change file names. Read right underneath it - itunes will create files & folders based on artist & album name.
    Something else must be changing your files, then - not iTunes.
    Every PC comes with WIndows Media Player. Go into that and uncheck the options to retreive internet info for albums. It's in 2 places, on the Library tab and the Privacy tab.
    Message was edited by: Katrina S.

  • How to STOP OS X from automatically changing between language input methods

    I want to know if there is a way in OS X Leopard to stop the system from automatically changing the language input method. I use English and Japanese on my computer, but this would apply to anyone using more than one input method.
    For example, when I click on a Japanese-language file, the system automatically changes input to Kotoeri (the Japanese-language input method). When I then click on an English-language file it usually, but not always, changes back to English input. But I almost never want to TYPE in Japanese. I just need to be able to read Japanese and to cut and paste from Japanese language files. It is very annoying when I start typing in an English-language file and find the input method has been changed to kotoeri without me realizing it—everything comes out in meaningless Japanese. When I want to type in Japanese, I want to manually change to the Japanese input system. That is, I want English to always be the default input method even if I am manipulating Japanese-language files.
    So, I’m wondering if there’s a way to set the computer so that it never AUTOMATICALLY switches between the input methods. I want to be able to switch only manually. In the old days of System 7, 8, and 9, there was a third-party control panel you could get that would do this (I think it was called Stay There!) and I don't remember this being a problem in Tiger or earlier versions of OS X. Is anyone aware of any way to do this in Leopard?
    Thank you!
    Colin

    Well, I do have it set that way, and I can look up there to see where I am, but in the work I do time is critical and I move back and forth between the two languages frequently. It is really a pain and a waste of time to have to look and make a change that should be unnecessary. The problem is not so much that I don't know where I am. It's that I don't want to ever have to think I MIGHT be in anything but English input unless I specifically want to be. In other words, I need to be able to forget about this problem even being a possibility.
    Message was edited by: Colin Talcroft

  • TS4050 when i want to sign in apple id in icloud from setting , appear a black page and loading .... help me ...

    when i want to sign in apple id in icloud from setting , appear a black page and loading .... help me ...

    Hello shlomi2890,
    To resolve your issue, you would need to change the Apple ID back to what you had originally, sign out and then change it back. Check out the article below for more information.
    iOS 7: If you're asked for the password to your previous Apple ID when signing out of iCloud
    http://support.apple.com/kb/TS5223
    Change your Apple ID temporarily
    If signing out and back in to iMessage or FaceTime didn't help, try these steps:
    Change your Apple ID to the Apple ID you used previously. You shouldn't need to verify the email address.
    Go to Settings > iCloud. Complete these steps only if the Find My [Device] setting is turned on:
    Scroll down and tap Delete Account, then tap Delete to confirm. 
    Tap “Keep on My [Device]” or “Delete from My [Device].” In either case, your data remains in iCloud and will be updated on your device when you sign in to iCloud again.
    Enter the password for your previous Apple ID.
    Change your Apple ID to the new email address that you want to use. You'll need to verify the email address.
    Return to Settings > iCloud and sign in with your new Apple ID.
    Regards,
    -Norm G.

  • Best Way to Set Change Bars on Right Margin

    I'm an InDesign newbie and need to set change bars on the right margin. I have a two-part question.
    First: from looking around at relevant blogs/tutorials that I've found, I've come to the conclusion that my best approach is to:
    1. Creat an (rectangle) object
    2. Draw a line with the desired change bar properties
    3. Cut and paste the line into the object
    4. Cut the object
    5. Use Object > Anchored Object > Insert to set the size and location of the object
         5a. X = aligned to page margin at negative width of containing frame (e.g., -45p0)
         5b. Y = alingned at baseline
    Does this sound right? Are there alternative/better ways?
    Second: I need a way to automate the above so that it can be applied to many instances of change. I have character style that marks every change which comes into InDesign from InCopy. From what I've seen, it doesn't look like it will be too hard to write a (javascript) script that does the above for every occurrence of the character style, thus automatically inserting my change bar/anchored object in every location where it's needed.
    Does this sound right? Any suggestions or references to existing scripts that do something like this?
    Thanks

    I think they need a visual in the layout - not just Story Mode.
    There's this script here
    http://www.kerntiff.co.uk/free-stuff/editmarksviewer
    http://www.kerntiff.co.uk/products-4-indesign/editmarks
    http://www.kerntiff.co.uk/products-4-indesign/editmarks/editmarks-navigator

  • How to run insert/update/delete from CDC Change table to target using OWB

    I am planning to set up CDC and publish CDC change table as source data into to OWB. I have come across where I am confused how to apply changes from CDC change table to target database using OWB. For i.e. change tables is containing information like
    operation$, cscn$,commit_timestamp$,xidusn$,....,list of column name
    D,12323223,8/28/2008 1:44:32PM,24,.....,list of column value that have to be deleted from target
    UO,12323224,8/28/2008 1:45:23PM,24,.....,list of column value that have to be updated in target.
    Please advice or give me some hint. Thank you.

    Hi,
    you can wait for 11gR2 with CDC integration or build most of the code outside the owb. To use CDC you must do this things (http://www.oracle.com/technology/oramag/oracle/03-nov/o63tech_bi.html):
    1. Identify the source tables.
    2. Set up a publisher.
    3. Create change tables.
    4. Set up a subscriber.
    5. Subscribe to the source tables, and activate the subscription.
    6. Set up the CDC window.
    7. Prepare a subscriber view.
    8. Access data from the change tables.
    9. Drop the subscriber view, and purge the CDC window.
    10. Repeat steps 6 through 9 to see new data.
    You can do only a few of this inside owb, most of it must be done outside.
    Regards,
    Detlef

  • HT5517 changing airplay speakers doesn't work, also photostream

    I have a network of airplay speakers that work perfectly all over my house from my iPhone and mac perfectly.  I was playing around with my newest generation Apple TV 1080P, and while it finds all of the rooms, when I select another room no sound comes out.  I am very confused.  Also, I noticed that my photostream has not updated in a while.  I restarted the Apple TV and it added another 50 photos or so, but still 100 short of the photos I had updated.

    Then this function in Airplay settings is completely useless.  It's just a screen.  What is the point of being able to select a different room through the AppleTV (with a checkmark), and nothing happens?  It was one of the touted features of the latest update for the AppleTV.
    Here is the note from Apple TV Support Section. http://support.apple.com/kb/HT5517
    Changing AirPlay speakers
    You can use AirPlay to play music or other audio content on the Apple TV on other AirPlay speakers.

Maybe you are looking for