Eclipse Remote Debugging

Hi all,
I could not find the right place in the forum to log this error. If anyone knows kindly let me know.
The issue is given below :-
I have configured my Eclipse to perform Remote Debugging. I have a Borland Enterprise Server running to which my Eclipse connects at a particular port and
allows me to debug i.e. Step Over, Step Through, Breakpoints etc.
Since the calls between the compents of the server and client are basically corba calls i am not able to see the values of the variables when i step through the
code in the eclipse.
How do i resolve this.
Thanks
Ram

Sorry!
          the debug option was NOT enabled (seems that my ant script is too
          complex at this stadium...)
          Cheers,
          Jan.
          [email protected] (Jan-Friedrich Mutter) wrote in message news:<[email protected]>...
          > Hi,
          >
          > I'd like to debug my Servlets/EJB's running on a Weblogic 6.1 SP4. My
          > IDE is Eclipse 2.1
          > To enable remote debugging I start Weblogic with that additional JVM
          > options:
          >
          > -classic -Xdebug -Xnoagent
          > -Xrunjdwp:transport=dt_socket,address=5000,suspend=y,server=y
          >
          > and configured my Remote Application in Eclipse accordingly.
          >
          > The connection successes.
          >
          > Problem: When I reach my breakpoint, Eclipse pops up an error message:
          > "Attempting to install a breakpoint in the type
          > com.xxx....
          > that has no line number attributes. The breakpoint cannot be
          > installed. Class files must be generated with the line number
          > attributes.
          > Reason:
          > Absent Line Number Information"
          >
          > I compiled my sources with enabled debug option.
          >
          > Any comments and ideas are appreciated.
          >
          > Cheers,
          > Jan.

Similar Messages

Remote debug on Eclipse

Hi,all
I'm using eclipse 3.1.1 to debug a servlet deployed on sjsas7 2004Q2, the os is windows. The only connect type on eclipse is Standard(Socket Attach), so I set the debug options in sjsas is:-Xdebug -Dnoagent -Djava.compiler=NONE -Xrunjdwp:transport=dt_socket,server=y,address=1234,suspend=n,
When I use debug in eclipse, it connect to sjsas successfully.
But there's and appservd.exe application error, if I set a breakpoint in eclipse and the sjsas restarts.
I appreciate anyone tell me how to solve this problem or how can I use shared memoy type in eclipse remote debug?
Thanks alot

Hi,
I am also facing this problem in debug mode in Eclipse 3.1.1 .
We are trying to run a huge JNI call to an exe which makes use of
win32 and mfc dlls . please help . is it possible to make jni calls from java program in eclipse . am not getting any exceptions but the .exe file is not running . any help would be great ...
email : [email protected]
FATAL ERROR in native method: No transports initialized
Invalid listen port number: localhost:2429
Transport dt_socket failed to initialize, rc = -1.

Remote Debug mode while starting Weblogic server using my eclipse plugin

Hi
When am starting the Weblogic server via my eclipse it is opening in Remote Debug mode. Can anyone tell me how do I change the preferences/configure so that it doesnt run in debug mode.
NOTE:I have deployed the application and ran number of times, till yesterday it wasn't starting in this mode, though I haven't changed any settings since then, it is starting in Remote Debug mode.
Thanks,

The above issue is resolved by adding this to setDomainEnv.sh :
ALTERNATE_TYPES_DIRECTORY="${WLPORTAL_HOME}/portal/lib/security"
export ALTERNATE_TYPES_DIRECTORY
JAVA_OPTIONS="${JAVA_OPTIONS} -Dweblogic.alternateTypesDirectory=${ALTERNATE_TYPES_DIRECTORY}"
# weblogic extension directories (system jars)
if [ "${WEBLOGIC_EXTENSION_DIRS}" != "" ] ; then
WEBLOGIC_EXTENSION_DIRS="${WEBLOGIC_EXTENSION_DIRS}${CLASSPATHSEP}${WLPORTAL_HOME}/p13n/lib/system"
export WEBLOGIC_EXTENSION_DIRS
else
WEBLOGIC_EXTENSION_DIRS="${WLPORTAL_HOME}/p13n/lib/system"
export WEBLOGIC_EXTENSION_DIRS
fi
WEBLOGIC_EXTENSION_DIRS="${WEBLOGIC_EXTENSION_DIRS}${CLASSPATHSEP}${WLPORTAL_HOME}/light-portal/lib/system${CLASSPATHSEP}${WLPORTAL_HOME}/portal/lib/system${
CLASSPATHSEP}${WLPORTAL_HOME}/info-mgmt/lib/system${CLASSPATHSEP}${WLPORTAL_HOME}/analytics/lib/system${CLASSPATHSEP}${WLPORTAL_HOME}/apps/lib/system${CLASSP
ATHSEP}${WLPORTAL_HOME}/info-mgmt/deprecated/lib/system"
export WEBLOGIC_EXTENSION_DIRS
WEBLOGIC_EXTENSION_DIRS="${WEBLOGIC_EXTENSION_DIRS}${CLASSPATHSEP}${WLPORTAL_HOME}/content-mgmt/lib/system"
export WEBLOGIC_EXTENSION_DIRS
if [ "${WEBLOGIC_EXTENSION_DIRS}" != "" ] ; then
JAVA_OPTIONS="${JAVA_OPTIONS} -Dweblogic.ext.dirs=${WEBLOGIC_EXTENSION_DIRS}"
export JAVA_OPTIONS
fi

Remote Debug in eclipse

Hello!
I am new to eclipse...Can someone tell me how to use remote debug? I thought it is done by running "Debug..." after selecting the java file...Sorry for being so ignorant about this...I will really appreciate your help. Thank you.

You do not have to have a main() method in the application. In fact you can have a breakpoint in any Java component. It just has to be in debugger's scope and it'll get visited.
Example: Let's say you're rinning a Tomcat app. You can have a breakpoint inside a servlet's doGet() methof and when you invkoke the servlet from Firefox, Eclipse will pause the excution and will bring the debugger perspective up.
From the article "Eclipse Debug window should automatically pop-up with the stack pointer on your first breakpoint (See Figure 3: Breakpoint hit in Eclipse's debugger). After that, you can use all the various functions that the debugger has to offer, namely variable assignments, step-into, drop to frame, etc."
If you're not seeining anything, chances are that you're not executing that piece of code. Double check that and let me know.
Levent Gurses

Remote Debugging w/Eclipse Transport Error

I am requesting help on a problem I am encountering using remote debugging with eclipse and Weblogic 8.1.2. I have successfully used remote debugging in the past with other application servers, but I have been unsuccessful with Weblogic 8.1.
I have set the remote debugging options both on the weblogic start script as well as configured eclipse to connect to the port that was defined in the startup script (See Below). When I start the remote debugger within eclipse and it seems to connect properly. Once I set a break point or remove a break point, weblogic generates a "Transport error, error code = -1" and stops the debugger with in Eclipse.
At this point I am at a loss of what is causing this error. I would appreciate any help on this issue.
Operating System: WindowsXP Pro
Weblogic Version: 8.1.2
Eclipse 3.2
JDK 1.4.2
JAVA_OPTS: =-Xdebug -Xnoagent -Djava.compiler=NONE -Xrunjdwp:transport=dt_socket,address=7777,server=y,suspend=n
Thanks!
Rafael Salazar

Interesting. I tried it and it works. you might want to check your Eclipse port number. In addition try netstat -a to see if port 1044 is active.
This one might also help: http://www.jacoozi.com/index.php?option=com_content&task=view&id=119&Itemid=134
Let me know if you have any questions.

Remote Debugging w/ Eclipse and Weblogic

Hi,
          I'd like to debug my Servlets/EJB's running on a Weblogic 6.1 SP4. My
          IDE is Eclipse 2.1
          To enable remote debugging I start Weblogic with that additional JVM
          options:
          -classic -Xdebug -Xnoagent
          -Xrunjdwp:transport=dt_socket,address=5000,suspend=y,server=y
          and configured my Remote Application in Eclipse accordingly.
          The connection successes.
          Problem: When I reach my breakpoint, Eclipse pops up an error message:
          "Attempting to install a breakpoint in the type
          com.xxx....
          that has no line number attributes. The breakpoint cannot be
          installed. Class files must be generated with the line number
          attributes.
          Reason:
          Absent Line Number Information"
          I compiled my sources with enabled debug option.
          Any comments and ideas are appreciated.
          Cheers,
          Jan.


Sorry!
          the debug option was NOT enabled (seems that my ant script is too
          complex at this stadium...)
          Cheers,
          Jan.
          [email protected] (Jan-Friedrich Mutter) wrote in message news:<[email protected]>...
          > Hi,
          >
          > I'd like to debug my Servlets/EJB's running on a Weblogic 6.1 SP4. My
          > IDE is Eclipse 2.1
          > To enable remote debugging I start Weblogic with that additional JVM
          > options:
          >
          > -classic -Xdebug -Xnoagent
          > -Xrunjdwp:transport=dt_socket,address=5000,suspend=y,server=y
          >
          > and configured my Remote Application in Eclipse accordingly.
          >
          > The connection successes.
          >
          > Problem: When I reach my breakpoint, Eclipse pops up an error message:
          > "Attempting to install a breakpoint in the type
          > com.xxx....
          > that has no line number attributes. The breakpoint cannot be
          > installed. Class files must be generated with the line number
          > attributes.
          > Reason:
          > Absent Line Number Information"
          >
          > I compiled my sources with enabled debug option.
          >
          > Any comments and ideas are appreciated.
          >
          > Cheers,
          > Jan.

Remote debugging the Oracle weblogic 10.3.3 from eclipse

As I see the startWeblogic.cml, I am finding it totally different frim the earlier scripts. I need to do remote debugging of the weblogic 10.3.3 from eclipse. Can someone guide me. Here below is the script of startweblogic.cmd I am finding on the oracle weblogic server. Need help as I need to do the remote debugging.
1. @rem *************************************************************************
2. @rem This script is used to set up your environment for development with
3. @rem WebLogic Server. It sets the following variables:
4. @rem
5. @rem WL_HOME - The root directory of your WebLogic installation
6. @rem JAVA_HOME - Location of the version of Java used to start WebLogic
7. @rem Server. This variable must point to the root directory of a
8. @rem JDK installation and will be set for you by the installer.
9. @rem See the WebLogic platform support page
10. @rem (@DOCSHOST/platforms/index.html) for an up-to-date list of
11. @rem supported JVMs on Windows NT.
12. @rem PATH - Adds the JDK and WebLogic directories to the system path.
13. @rem CLASSPATH - Adds the JDK and WebLogic jars to the classpath.
14. @rem
15. @rem Other variables that setWLSEnv takes are:
16. @rem
17. @rem PRE_CLASSPATH - Path style variable to be added to the beginning of the
18. @rem CLASSPATH
19. @rem POST_CLASSPATH - Path style variable to be added to the end of the
20. @rem CLASSPATH
21. @rem PRE_PATH - Path style variable to be added to the beginning of the
22. @rem PATH
23. @rem POST_PATH - Path style variable to be added to the end of the PATH
24. @rem
25. @rem When setting these variables below, please use short file names(8.3).
26. @rem To display short (MS-DOS) filenames, use "dir /x". File names with
27. @rem spaces will break this script.
28. @rem
29. @rem jDriver for Oracle users: This script assumes that native libraries
30. @rem required for jDriver for Oracle have been installed in the proper
31. @rem location and that your system PATH variable has been set appropriately.
32. @rem
33. @rem For additional information, refer to the WebLogic Server Administration
34. @rem Guide (@DOCSWEBROOT/adminguide/startstop.html).
35. @rem *************************************************************************
36. @echo off
37.
38. @rem Set user-defined variables.
39. set WL_HOME=C:\bea\wlserver_10.3
40. call "%WL_HOME%\common\bin\commEnv.cmd"
41.
42. @rem Check that the WebLogic classes are where we expect them to be
43. @if exist "%WL_HOME%\server\lib\weblogic.jar" goto checkJava
44. @echo.
45. @echo The WebLogic Server wasn't found in directory %WL_HOME%\server.
46. @echo Please edit the setWLSEnv.cmd script so that the WL_HOME
47. @echo variable points to the WebLogic installation directory.
48. @echo Your environment has not been set.
49. @goto finish
50.
51. @rem Check that java is where we expect it to be
52. :checkJava
53. @if exist "%JAVA_HOME%\bin\java.exe" goto setWLSEnv
54. @echo.
55. @echo The JDK wasn't found in directory %JAVA_HOME%.
56. @echo Please edit the setWLSEnv.cmd script so that the JAVA_HOME
57. @echo variable points to the location of your JDK.
58. @echo Your environment has not been set.
59. @goto finish
60.
61. :setWLSEnv
62. set CLASSPATH=%WEBLOGIC_CLASSPATH%;%CLASSPATH%
63.
64. @rem Import extended environment
65.
66. if exist extEnv.cmd call extEnv.cmd
67. if not "%EXT_PRE_CLASSPATH%" == "" set CLASSPATH=%EXT_PRE_CLASSPATH%;%CLASSPATH%
68. if not "%EXT_POST_CLASSPATH%" == "" set CLASSPATH=%CLASSPATH%;%EXT_POST_CLASSPATH%
69. if not "%EXT_PRE_PATH%" == "" set PATH=%EXT_PRE_PATH%;%PATH%
70. if not "%EXT_POST_PATH%" == "" set PATH=%PATH%;%EXT_POST_PATH%
71.
72. @rem Get PRE and POST environment
73. if not "%PRE_CLASSPATH%" == "" set CLASSPATH=%PRE_CLASSPATH%;%CLASSPATH%
74. if not "%POST_CLASSPATH%" == "" set CLASSPATH=%CLASSPATH%;%POST_CLASSPATH%
75. if not "%PRE_PATH%" == "" set PATH=%PRE_PATH%;%PATH%
76. if not "%POST_PATH%" == "" set PATH=%PATH%;%POST_PATH%
77.
78. @echo.
79. @echo CLASSPATH=%CLASSPATH%
80. @echo.
81. @echo PATH=%PATH%
82. @echo.
83. @echo Your environment has been set.
84.
85. :finish

this Running Weblogic Server 10.3.3 in Debug mode gentleman seems to have found the solution.
if you create a server inside Eclipse, you have the menu option "start in debug mode" who should do the job for you

Remote Debugging Weblogic 92 application using Eclipse 3.4

Hi,
1. I have the below debug options in the startweblogic script.
set JAVA_OPTIONS=-Xdebug -Xnoagent -Djava.compiler=NONE -Xrunjdwp:transport=dt_socket,server=y,address=javadebug,suspend=n
2. I have configured remote debugging in Eclipse. Connection type - Standard Socket (attach), host =localhost, port 7001. 7001 is the listen port that I have specified in config.xml.
3. When I run weblogic, I see the message listening for transport dt_socket address. Since address=javadebug, each time the dt_socket address is different.
4. In Eclipse IDE, the debug prespective indicates the server has started. But when I click on the debug buttin in the Debug configuration dialog, I get the error below
Failed to connect to remote VM. Connection timed out.
org.eclipse.jdi.TimeoutException
Note: Another thread in this forum mentions using the same port that is specified in the java_options but that did not work either. Any ideas what might be wrong?
Thanks.
RS.

I think that value of "javadebug" is only used for shared memory transport, not socket transport. You have to choose a port that isn't being used by anything else. The value 8453 is a typical default value for this. Specify that instead of "javadebug", and use 8453 in your connection from Eclipse.

Remote debugging problem with Weblogic 9 in Eclipse

Hi,
I'm trying to test out debugging a test app using Eclipse as the IDE and the Weblogic 9.0 server. Debugging with 8.1 worked fine. No problems. When I start the 9.0 server, I get "Error launching remote debugging for external server, changing to non-debugging mode. Please check the debug port setting and ensure that the specified "start" executable launches the server with debugging enabled."
Any ideas where to start?
-Eric

Try this:
1. Login with administrator user
2. Security Realms > myrealm > Providers > DefaultAuthenticator > Migration > Export
3. Click on save button to get /DOMAINHOME/DefaultAuthenticator.dat file 4. Backup /DOMAIN_HOME/security/DefaultAuthenticator.ldift file
5. Move /DOMAINHOME/DefaultAuthenticator.dat file to /DOMAIN_HOME/security/ directory
6. Rename /DOMAIN_HOME/security/DefaultAuthenticator.dat to /DOMAIN_HOME/security/DefaultAuthenticator.ldift
7. Shutdown all servers
8. Delete LDAP directory in each server
9. Start up all servers
Good luck !
Octavio

Remote Debugging in Eclipse

hi,
I am using Eclipse3.1 and Tomcat 5.
While doing remote debugging ,i got a message Failed to connect to remote VM.i searched for forum about this.i got solution but i couldn't rectify this.can any one tell where to insert the line in the tomcat's start.bat ? How to start the tomcat? and remaining settings in Eclipse .I need step by step process.
my task is to connect to the remote unix server.i dont know how to connect to the server with giving the values of hostname,userid and password .
Kindly help me ,I spent 2 weeks in this.
thanking you.

You need to start the remove VM in debug mode. For that you need to start with following options
java -Xrunjdwp:transport=dt_socket,server=y,suspend=n,address=4000
Then try connecting to Remote VM with IP/Port number 4000.

WD Java Remote Debug problem: Release Process from debugging

Hi Community,
when I used to debug Web Dynpro Java from the SAP Developer Studio (eclipse) to a remote host (Portal AS NW Java), it works fine for the first run. After disconnecting the remote debug session (server0), I changed the coding and try to debug again with the effect that the old coding is still used from the server process (server0) even though the parameter "Create and Deploy archive" is set (enabled) in the debug configuration. Furthermore the funktionality of "Relase process from debugging" option in the J2EE Engine dosn't react / work.
I think that the debug session is still running and the Developer Studio is not able to send any "Kill" statement to the server process for ending this session.
I tried following:
A. Rebuild Project and Deploy the archive on the "normal" way
B. Reopen the Developer Studio itself
C. Start the Project in debugmode again and chose the option "Terminate All"
...all without any success.
The only way is to restart the whole server process server0 again with the same trouble after the first debug.
Did any of you have a clue or experience to clear or kill the debugsession from the process so that next debugsessions can be started, please reply.
Thanks
Used Basic Manuell
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/849170e3-0601-0010-d59e-ddfce735fac5

So, I'm having the same issue, but it's like I'm chasing down a port. The first time I got these error messages
Connecting to the database DEV.
Executing PL/SQL: ALTER SESSION SET PLSQL_DEBUG=TRUE
Executing PL/SQL: CALL DBMS_DEBUG_JDWP.CONNECT_TCP( '555.12.18.288', '5950' )
ORA-30683: failure establishing connection to debugger
ORA-12535: TNS:operation timed out
ORA-06512: at "SYS.DBMS_DEBUG_JDWP", line 68
ORA-06512: at line 1
Process exited.
Disconnecting from the database DEV.Our network staff found a bunch of other denials in the firewall logs
/5185
/5200
/5236
/5815
/5950 Now that they've those allowed, I tried to start debug again, and this time I got
Connecting to the database DEV.
Executing PL/SQL: ALTER SESSION SET PLSQL_DEBUG=TRUE
Executing PL/SQL: CALL DBMS_DEBUG_JDWP.CONNECT_TCP('555.12.18.288', '6266' )
ORA-30683: failure establishing connection to debugger
ORA-12535: TNS:operation timed out
ORA-06512: at "SYS.DBMS_DEBUG_JDWP", line 68
ORA-06512: at line 1
Process exited.
Disconnecting from the database DEV.What gives? Do I just keep trying until I get all of the ports allowed?
Thanks,
---=Chuck

How can I enable remote debug in weblogic to use with Rational RSA IDE?

How can I enable the remote debugging technique so that I can work with my IDE.
I use RSA by IBM as the IDE
What should be the changes in the setdomainenv or startweblogic?
I use 10.3
Please help.. ur help is appreciable...

Hi,
I did not make any console adjustments for debugging on my WebLogic 10.3.2.0 - however I am running in development mode on an "adminServer" (an option during the install)
In the console there is a debug setup page - that seems to have no effect for me (I can always debug) - so either it is a combination of development mode and/or the startWeblogic script from the Eclipse plugin.
However, these debug settings are likely for debugging into the server - you only want to debug your own app code right?
On the console page goto
http://localhost:7001/console/console.portal?_nfpb=true&_pageLabel=ServerDebugPage
servers | AdminServer | configuration-debug | expand weblogic
I see...
"Use this page to define debug settings for this server.
Debug settings for this Server
EnableDisableClear Showing 1 to 2 of 2 Previous Next
Debug Scopes and Attributes State
default Disabled
weblogic Disabled
EnableDisableClear Showing 1 to 2 of 2 Previous Next
Try expanding the whole tree and selecting the root to enable everything.
You will see the following
10-Dec-2009 11:53:46 o'clock AM EST> <Warning> <Management> <BEA-141239> <The non-dynamic attribute DebugAbbreviation on weblogic.management.configuration.ServerDebugMBeanImpl@47a32e1b([base_domain]/Servers[AdminServer]/ServerDebug[AdminServer]) has been changed. This may require redeploying or rebooting configured entities>
<10-Dec-2009 11:53:46 o'clock AM EST> <Warning> <Management> <BEA-141238> <A non-dynamic change has been made which affects the server AdminServer. This server must be rebooted in order to consume this change.>
<10-Dec-2009 11:53:46 o'clock AM EST> <Warning> <netuix> <BEA-423420> <Redirect is executed in begin or refresh action. Redirect url is /console/console.portal?_nfpb=true&_pageLabel=ServerDebugPage.>
When I debug WebLogic 10.3.2.0 from Eclipse 3.5 EE - I see the following in my server startup log which includes the "-Xdebug -Xnoagent -Xrunjdwp:transport=dt_socket,address=8453" you mentioned.
Starting WLS with line:
c:\opt\wls10320\JROCKI~1.5-3\bin\java -jrockit -Xdebug -Xnoagent -Xrunjdwp:transport=dt_socket,address=8453,server=y,suspend=n -Djava.compiler=NONE -Xms512m -Xmx512m -Dweblogic.Name=AdminServer -Djava.security.policy=C:\opt\wls10320\WLSERV~1.3\server\lib\weblogic.policy -Xverify:none -ea -da:com.bea... -da:javelin... -da:weblogic... -ea:com.bea.wli... -ea:com.bea.broker... -ea:com.bea.sbconsole... -Dplatform.home=C:\opt\wls10320\WLSERV~1.3 -Dwls.home=C:\opt\wls10320\WLSERV~1.3\server -Dweblogic.home=C:\opt\wls10320\WLSERV~1.3\server -Dweblogic.management.discover=true -Dwlw.iterativeDev= -Dwlw.testConsole= -Dwlw.logErrorsToConsole= -Dweblogic.ext.dirs=c:\opt\wls10320\patch_wls1032\profiles\default\sysext_manifest_classpath weblogic.Server
Listening for transport dt_socket at address: 8453
The server process listening on debug portl 8453 ooks like this
Oracle WebLogic Server 11gR1 PatchSet 1 at localhost [Oracle WebLogic Launch Configuration]
     BEA JRockit(R)[localhost:8453]
          Thread [Main Thread] (Running)
          Daemon Thread [Timer-0] (Running)
          Daemon Thread [Timer-1] (Running)
          Daemon Thread [[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'] (Running)
          Daemon Thread [weblogic.time.TimeEventGenerator] (Running)
          Daemon Thread [JMAPI event thread] (Running)
          Daemon Thread [weblogic.timers.TimerThread] (Running)
          Daemon Thread [[ACTIVE] ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)'] (Running)
          Daemon Thread [Thread-7] (Running)
          Daemon Thread [ExecuteThread: '0' for queue: 'weblogic.socket.Muxer'] (Running)
          Daemon Thread [ExecuteThread: '1' for queue: 'weblogic.socket.Muxer'] (Running)
I hit a breakpoint and see
Daemon Thread [[ACTIVE] ExecuteThread: '13' for queue: 'weblogic.kernel.Default (self-tuning)'] (Suspended (breakpoint at line 56 in ApplicationService))
     ApplicationService_5ptwty_Impl(ApplicationService).insertObjects(List<Cell>) line: 56
     NativeMethodAccessorImpl.invoke0(Method, Object, Object[]) line: not available [native method]
     NativeMethodAccessorImpl.invoke(Object, Object[]) line: 39
     DelegatingMethodAccessorImpl.invoke(Object, Object[]) line: 25
     Method.invoke(Object, Object...) line: 597
     AopUtils.invokeJoinpointUsingReflection(Object, Method, Object[]) line: 310
     ReflectiveMethodInvocation.invokeJoinpoint() line: 182
     ReflectiveMethodInvocation.proceed() line: 149
     DelegatingIntroductionInterceptor.doProceed(MethodInvocation) line: 131
     DelegatingIntroductionInterceptor.invoke(MethodInvocation) line: 119
     ReflectiveMethodInvocation.proceed() line: 171
     MethodInvocationVisitorImpl.visit() line: 37
     EnvironmentInterceptorCallbackImpl.callback(MethodInvocationVisitor) line: 55
     EnvironmentInterceptor.invoke(MethodInvocation) line: 50
     ReflectiveMethodInvocation.proceed() line: 171
     ExposeInvocationInterceptor.invoke(MethodInvocation) line: 89
     ReflectiveMethodInvocation.proceed() line: 171
     DelegatingIntroductionInterceptor.doProceed(MethodInvocation) line: 131
     DelegatingIntroductionInterceptor.invoke(MethodInvocation) line: 119
     ReflectiveMethodInvocation.proceed() line: 171
     JdkDynamicAopProxy.invoke(Object, Method, Object[]) line: 204
     $Proxy68.insertObjects(List) line: not available
     ApplicationService_5ptwty_ApplicationServiceLocalImpl.insertObjects(List<Cell>) line: 306
     FrontController.generateGlider(PrintWriter) line: 240
thank you
/michael
http://www.eclipselink.org

Remote Debugging LiveCycle Trail Version

Hello,
I was trying to debug remotely using Eclipse. I uncommented all the batch files in jboss/bin directory to turn on debug options. When I ever I try to connect I get the following message.
Failed to connect to remote VM. Connection refused.
Connection refused: connect
I'm not able to auto-populate the xdp form with xml data when I retrieve the pdf so I was trying to remotely debug the application
I would appreciate if someone can point if I'm missing something.
Thanks
Sameera

> I was trying to debug remotely using Eclipse. I uncommented all the batch
> files in jboss/bin directory to turn on debug options. When I ever I try
> to connect I get the following message.
>
> Failed to connect to remote VM. Connection refused.
> Connection refused: connect
I hope you figured this out already but if you haven't, the JDK for the
JBoss server is not listening to the same port as Eclipse is trying to
connect to. Or its not listening at all (your debug switches didn't work).
Tom Jordahl

Internet Sales R/3 remote debugging

Hi,
Can anybody tell me, how to remote debugg a Internet Sales Application? I've read some lines in the Development and Extension Guide, but this is not a lot.
I don't understand how do debug a classfile. Because normaly the classfile will be compiled and deployed on the SAP J2EE. Is it possible to debugg this class with the remote debugging function of Eclipse?
Thank u for every answer,
regards Thomas

What is the solution for remote debugging, can you share.
Also, I have question regarding JSP page. How can I display name of jsp page on the browser for internet sales application. I know there is some variable like showmodulename to be set to true. I want to know how to use it. I tried but could not make it to work.
Thanks

Linux remote debug - can't load jdwp helper lib

Running RedHat 7.1 and jetty web server with jdk 1.3.1_09(?) (and ultimately trying to do a remote
debug from a Windows Eclipse machine).
Running jetty with cmd line args:
-Xmx256m -Xnoagent -Xrunjdwp:transport=dt_socket,server=y,suspend=y,address=8000 -Djava.compiler=NONE
linux says:
unable to configure JVMDI events
unable to initialize JVM helper library jdwp
loadJVMHelperLib failed
could not create the Java virtual machine
The linux jdk has /bin/libjdwp.so and /bin/libjdwp_g.so

silly me: I forgot the -Xdebug option. Now it works. Never mind.

Eclipse Remote Debugging

Similar Messages

Maybe you are looking for