Remote debugging the Oracle weblogic 10.3.3 from eclipse

As I see the startWeblogic.cml, I am finding it totally different frim the earlier scripts. I need to do remote debugging of the weblogic 10.3.3 from eclipse. Can someone guide me. Here below is the script of startweblogic.cmd I am finding on the oracle weblogic server. Need help as I need to do the remote debugging.
1. @rem *************************************************************************
2. @rem This script is used to set up your environment for development with
3. @rem WebLogic Server. It sets the following variables:
4. @rem
5. @rem WL_HOME - The root directory of your WebLogic installation
6. @rem JAVA_HOME - Location of the version of Java used to start WebLogic
7. @rem Server. This variable must point to the root directory of a
8. @rem JDK installation and will be set for you by the installer.
9. @rem See the WebLogic platform support page
10. @rem (@DOCSHOST/platforms/index.html) for an up-to-date list of
11. @rem supported JVMs on Windows NT.
12. @rem PATH - Adds the JDK and WebLogic directories to the system path.
13. @rem CLASSPATH - Adds the JDK and WebLogic jars to the classpath.
14. @rem
15. @rem Other variables that setWLSEnv takes are:
16. @rem
17. @rem PRE_CLASSPATH - Path style variable to be added to the beginning of the
18. @rem CLASSPATH
19. @rem POST_CLASSPATH - Path style variable to be added to the end of the
20. @rem CLASSPATH
21. @rem PRE_PATH - Path style variable to be added to the beginning of the
22. @rem PATH
23. @rem POST_PATH - Path style variable to be added to the end of the PATH
24. @rem
25. @rem When setting these variables below, please use short file names(8.3).
26. @rem To display short (MS-DOS) filenames, use "dir /x". File names with
27. @rem spaces will break this script.
28. @rem
29. @rem jDriver for Oracle users: This script assumes that native libraries
30. @rem required for jDriver for Oracle have been installed in the proper
31. @rem location and that your system PATH variable has been set appropriately.
32. @rem
33. @rem For additional information, refer to the WebLogic Server Administration
34. @rem Guide (@DOCSWEBROOT/adminguide/startstop.html).
35. @rem *************************************************************************
36. @echo off
37.
38. @rem Set user-defined variables.
39. set WL_HOME=C:\bea\wlserver_10.3
40. call "%WL_HOME%\common\bin\commEnv.cmd"
41.
42. @rem Check that the WebLogic classes are where we expect them to be
43. @if exist "%WL_HOME%\server\lib\weblogic.jar" goto checkJava
44. @echo.
45. @echo The WebLogic Server wasn't found in directory %WL_HOME%\server.
46. @echo Please edit the setWLSEnv.cmd script so that the WL_HOME
47. @echo variable points to the WebLogic installation directory.
48. @echo Your environment has not been set.
49. @goto finish
50.
51. @rem Check that java is where we expect it to be
52. :checkJava
53. @if exist "%JAVA_HOME%\bin\java.exe" goto setWLSEnv
54. @echo.
55. @echo The JDK wasn't found in directory %JAVA_HOME%.
56. @echo Please edit the setWLSEnv.cmd script so that the JAVA_HOME
57. @echo variable points to the location of your JDK.
58. @echo Your environment has not been set.
59. @goto finish
60.
61. :setWLSEnv
62. set CLASSPATH=%WEBLOGIC_CLASSPATH%;%CLASSPATH%
63.
64. @rem Import extended environment
65.
66. if exist extEnv.cmd call extEnv.cmd
67. if not "%EXT_PRE_CLASSPATH%" == "" set CLASSPATH=%EXT_PRE_CLASSPATH%;%CLASSPATH%
68. if not "%EXT_POST_CLASSPATH%" == "" set CLASSPATH=%CLASSPATH%;%EXT_POST_CLASSPATH%
69. if not "%EXT_PRE_PATH%" == "" set PATH=%EXT_PRE_PATH%;%PATH%
70. if not "%EXT_POST_PATH%" == "" set PATH=%PATH%;%EXT_POST_PATH%
71.
72. @rem Get PRE and POST environment
73. if not "%PRE_CLASSPATH%" == "" set CLASSPATH=%PRE_CLASSPATH%;%CLASSPATH%
74. if not "%POST_CLASSPATH%" == "" set CLASSPATH=%CLASSPATH%;%POST_CLASSPATH%
75. if not "%PRE_PATH%" == "" set PATH=%PRE_PATH%;%PATH%
76. if not "%POST_PATH%" == "" set PATH=%PATH%;%POST_PATH%
77.
78. @echo.
79. @echo CLASSPATH=%CLASSPATH%
80. @echo.
81. @echo PATH=%PATH%
82. @echo.
83. @echo Your environment has been set.
84.
85. :finish

this Running Weblogic Server 10.3.3 in Debug mode gentleman seems to have found the solution.
if you create a server inside Eclipse, you have the menu option "start in debug mode" who should do the job for you

Similar Messages

Patchset3 (11.1.1.4/wls 10.3.4) Remote debugging JDPA in weblogic cluster

Hi,
I am using Patchset3 (JDeveloper 11.1.1.4/ weblogic server 10.3.4). I was wondering how i can remote debug with
a) weblogic managed server that is part of a weblogic cluster
b) the cluster itself that contains multiple managed servers.
Note that i do understand how to remote debug against a weblogic server (e.g. http://jdeveloperfaq.blogspot.com/2009/12/faq-4-how-to-remote-debug-adf.html), but have not been able to find out how i can achieve this against a cluster that has multiple managed servers. Any directions will be appreciated.
Thanks,

Hi,
haven't tried it but here are some suggestions that might be of help:
1) Each managed server for each cluster node should be setup for remote debugging. This means that each managed server must be started with the -Xdebug -Xnoagent -Xrunjdwp:transport=dt_socket,address=4000,server=y,suspend=n* options in the WebLogic start-up script. Also Tunneling must be enabled for each managed server for each cluster node.
2) Make sure that you specify a different connection port for each managed server. This is indicated by the address* specifier above.
3) It seems logical to me that you will need to start separate instances of JDeveloper - one for each managed server that you need to attach to.
Let us know how it turns out,
Nick

How to conect to the Oracle 10 g Exp Edition from Oracle SQL Developer Tool

Hi all,
i have installed Oracle 10 g Exp Edition in my stand alone system(no internet connected to the system).
I want to connect through Oracle SQL Developer tool.
Can any one please tell me the steps involved in "how to connect to the Oracle 10 g Exp Edition from Oracle SQL Developer Tool ".
Thanks in Advance.

Creating a Database Connection
http://www.oracle.com/webfolder/technetwork/tutorials/obe/db/sqldev/r30/sqldev3.0_GS/sqldev3.0_GS.htm

Remote debugging problem with Weblogic 9 in Eclipse

Hi,
I'm trying to test out debugging a test app using Eclipse as the IDE and the Weblogic 9.0 server. Debugging with 8.1 worked fine. No problems. When I start the 9.0 server, I get "Error launching remote debugging for external server, changing to non-debugging mode. Please check the debug port setting and ensure that the specified "start" executable launches the server with debugging enabled."
Any ideas where to start?
-Eric

Try this:
1. Login with administrator user
2. Security Realms > myrealm > Providers > DefaultAuthenticator > Migration > Export
3. Click on save button to get /DOMAINHOME/DefaultAuthenticator.dat file 4. Backup /DOMAIN_HOME/security/DefaultAuthenticator.ldift file
5. Move /DOMAINHOME/DefaultAuthenticator.dat file to /DOMAIN_HOME/security/ directory
6. Rename /DOMAIN_HOME/security/DefaultAuthenticator.dat to /DOMAIN_HOME/security/DefaultAuthenticator.ldift
7. Shutdown all servers
8. Delete LDAP directory in each server
9. Start up all servers
Good luck !
Octavio

How to check if the Oracle e-business suite upgraded from 11 to 12 ?

Hi All,
Could you please advise how we can check if the Oracle e-business suite application upgraded from 11 to 12 ?
Regards,
Mohammed Mostafa

It is needed as some steps will be applied if it is upgraded from 11 to 12..
here is the output :
$
$ grep -i "s_rapidwizloc" /xxxxx/inst/apps/XXXXX_host/appl/admin/XXXXX_host.xml
<rapidwizloc oa_var="s_rapidwizloc">/autofs/cclibrary/CCrepos/linux_x86-64/EBizCC/1213/startCD/Disk1/rapidwiz</rapidwizloc>
$
$
$ grep -i "s_installloc" /xxxxx/inst/apps/XXXXX_host/appl/admin/XXXXX_host.xml
<installloc oa_var="s_installloc">/autofs/cclibrary/CCrepos/linux_x86-64/EBizCC/1213/startCD/Disk1</installloc>
$
How we can check then please if it is a fresh R12 installation or an upgraded from 11i? ?
Regards,
Mohammed

How to run the Oracle Triggers,Functions and Procedures from java

Hi ,
I want to execute the Oracle's Triggers, Functions and Procedures from java as like executing the SQL commands by using Execute statements.
Or can we have some other option for doing this.
Plz help me ...

you can use CallableStatement interface of JDBC to execute any DBMS triger,stored procedure ....
refer any of the JDBC book for extra help
hope you got it
Azeem Ahmed

Remote Debugging Oracle Weblogic 10.3 Server to Eclipse

Hi All,
I need to know a suitable way to link my eclipse debugger to Remotely running Weblogic 10.3 server. I have tried downloading server plugin in Eclipse and created a new one. I got it created. But when i try to start it, its throwing error as it cant be started. Please help me out in this issue.

Bharat,
Don't use the preview version, use the production version.
Really, don't use the preview - it was based on OC4J and not Weblogic, you will not be able to deploy anything to a production environment with the preview release.
John

Error while debugging the Oracle Stored Proc Body

I am trying to debug a standalone Oracle Stored Proc. I keep a break point on the Package body, and JDeveloper doesn't seem to pick it up at all. I have made sure that are the prerequisites are met and all the instructions have been followed diligently, but still i keep getting this error message:
Unable to set breakpoint (C:\Program Files\JDeveloper\jdev\mywork\ADReports\ADReportsProject\packagebody staging.staging_reports.sql 57), unable to resolve Java package.
The Debugger doesn't seem to stop at the specified break point in the package body. Though it does connect to the DB, and shows all the data values inside the procs, and other stuff as mentioned in the debug tutorial/manual.
Some replied to my previous post saying that it was a bug with the JDeveloper itself and it has been fixed, so if this is the case, can someone point me to the right place where we can download the bug free version.
Thanks in advance

Hi,
Please see:
PL/SQL Debugging does not stop on breakpoint
- Mark

Cannot Remote Debugging Weblogic 10

I can do a remote debugging in a same machine, but not from another machine. It appears to be some security issue. Basically start the machine with JAVA_OPTIONS=-Xdebug -Xnoagent -Xrunjdwp:transport=dt_socket,address=4000,server=y,suspend=n option.
I know that the other machine can reach this machine. I can ping, I can connect to a simple test server on a different port. I did open the port 4000 on the firewall. So, it's not a network issue.
I can also use an IDE to connect to the server at port 4000 to debug.
From another machine, if I telnet this machine with port 4000, it gets disconnect after a couple seconds. If I do the same within the same machine, the telnet doesn't disconnect.
So, the 2 machines see each other. It's just Weblogic senses it's another machine and disconnect.
It points to security settings, but why the document here:
http://www.oracle.com/technology/products/jdev/howtos/weblogic/remotedebugwls.html
doesn't say anything about that?
Please help. Regards.

Hi,
Take a look at this webpage:
http://jsp.java.sun.com/javaone/javaone2000/pdfs/TS-1569.pdf
Pages 17-18 and 24-26 are about setting up WebLogic for remote debugging. Classpath information is on page 24.
Liz
null

Remote Debugging w/ Eclipse and Weblogic

Hi,
          I'd like to debug my Servlets/EJB's running on a Weblogic 6.1 SP4. My
          IDE is Eclipse 2.1
          To enable remote debugging I start Weblogic with that additional JVM
          options:
          -classic -Xdebug -Xnoagent
          -Xrunjdwp:transport=dt_socket,address=5000,suspend=y,server=y
          and configured my Remote Application in Eclipse accordingly.
          The connection successes.
          Problem: When I reach my breakpoint, Eclipse pops up an error message:
          "Attempting to install a breakpoint in the type
          com.xxx....
          that has no line number attributes. The breakpoint cannot be
          installed. Class files must be generated with the line number
          attributes.
          Reason:
          Absent Line Number Information"
          I compiled my sources with enabled debug option.
          Any comments and ideas are appreciated.
          Cheers,
          Jan.


Sorry!
          the debug option was NOT enabled (seems that my ant script is too
          complex at this stadium...)
          Cheers,
          Jan.
          [email protected] (Jan-Friedrich Mutter) wrote in message news:<[email protected]>...
          > Hi,
          >
          > I'd like to debug my Servlets/EJB's running on a Weblogic 6.1 SP4. My
          > IDE is Eclipse 2.1
          > To enable remote debugging I start Weblogic with that additional JVM
          > options:
          >
          > -classic -Xdebug -Xnoagent
          > -Xrunjdwp:transport=dt_socket,address=5000,suspend=y,server=y
          >
          > and configured my Remote Application in Eclipse accordingly.
          >
          > The connection successes.
          >
          > Problem: When I reach my breakpoint, Eclipse pops up an error message:
          > "Attempting to install a breakpoint in the type
          > com.xxx....
          > that has no line number attributes. The breakpoint cannot be
          > installed. Class files must be generated with the line number
          > attributes.
          > Reason:
          > Absent Line Number Information"
          >
          > I compiled my sources with enabled debug option.
          >
          > Any comments and ideas are appreciated.
          >
          > Cheers,
          > Jan.

Problems with ant auto-loading the base Oracle Weblogic Libraries

I'm trying to perform an ant build of a Portal Project, and I get errors trying to compile the files from classes that are part of the Oracle WebLogic Portal Server and WebLogic System Libraries. I've tried adding the two list of jars as pathelements in an ant classpath object, but the javac isn't picking up the jars properly. I feel like there should be a script or be able to call a preconfigured version of ant for this.
I'm using an external version of ant, but using the jdk160_05 from WebLogic.
In the javac I get initial errors of things like:
[javac] /vobs/.../Portal/src/Controller.java:1: package javax.servlet.http does not exist
[javac] import javax.servlet.http.HttpSession;
[javac] ^
[javac] /vobs/.../Portal/src/Controller.java:2: package org.apache.beehive.netui.pageflow does not exist
[javac] import org.apache.beehive.netui.pageflow.PageFlowController;

not very likely. run ant with the verbose and debug flags and see what gets printed out for classpath etc (these classes are in server/lib/api.jar i think) , no special characters in your paths right?

What's the purpose of SQL Developer's remote debug?

AS per SQL Developer's "Remote debuggin", the user guide says "To debug a function or procedure for a
connection where the database is on a different
host than the one on which you are running SQL Developer, you can perform remote debugging."
I'm confused what's the prupose to do a remote debugging? Could you please give me a
scenario to help me clarify this term?
Thank you!
Jeff

Mmm, don't know if the database should really be on another host, but anyway it would be a characteristic, not a definition.
Remote debugging differs from normal debugging in the origin of the debugged session:
For normal debugging, you start a new session from within sqldev (local) and hook into the debugger (pretty easy and automated). For remote debugging, you hook whatever existing session (started from whatever program) on whatever host (remote) into the debugger (a bit more manual as you have to include the call to hook into the debugger yourself). Very useful for debugging remote sessions over a database link or a particular remote user situation which cannot be reproduced locally.
Have fun,
K.

Remote debugging issue

I've used the following remote debug properties and able to remote debug the Weblogic server from Oracle workshop.
-Xdebug -Xnoagent -Xrunjdwp:transport=dt_socket,address=8787,server=y,suspend=n
But this restricts to only one user/ client at any given time. Is there anyway inwhich one can enable mulitple user while remote debugging?
Amarnath

Not sure if it matters but I am using JDEV 9.0.3.4 with a 9.2.0.4 database and successfully stepped into and over a call to a java stored procedure from a PL/SQL trigger. I have a PL/SQL procedure which causes a trigger to be fired which in turn calls a Java Stored procedure.
Here is what I did:
1) create PL/SQL (including trigger and procedure) and deploy Java Stored Procedure
2) In SQLPlus send the command:
ALTER SESSION SET PLSQL_DEBUG=TRUE;
3) Execute the PL/SQL Procedure (which causes trigger to be fired)
4) In JDeveloper select Project properties->Debugger->remote and select JPDA Listen
5) Set a breakpoint in the trigger
6) Select debug and enter a port number for the listener
7) In SQLPLUS send the command:
CALL DBMS_DEBUG_JDWP.CONNECT_TCP( '<Your IP>', '<listener port>' );
8) Verify call succeeded is received in SQLPlus and debuggee connects to the debugger in JDeveloper.
9) Execute the PL/SQL procedure
10) When breakpoint hit stepped into the Java Stored procedure (which was not in the project so added to source path via the popup dialog)
11) stepped out of the Java Stored Procedure back into trigger
Hope this helps,
Bud

Configuring Apache HTTP Server with Oracle Weblogic Server plugin

Hello friends,
I have a scenario of OIM 9.1.0.2 on Oracle Application Server 11g and Weblogic Server Apache HTTP Server.
Oracle WebLogic Server is configured in cluster (node1 and node2), also use the Oracle Weblogic Server plugin for integration with Apache.
One of the tests is to lose one of the nodes for the apache plugin redirects the node that has less overhead.
When the mode is node1 and node2 stop start mode and try to access the management console of Oracle Identity Manager, the plugin sometimes redirects to the other active node, and on another occasion shows the oracle management console identity manager without the colors of the basic look and feel.
Deputy of the Apache HTTP Server log, do you expect your comments to solve this case?
*************************************************log****************************************************
Server Details are:
OrigHostInfo [192.168.1.200]
isOrigHostInfoDNS [0]
Host [192.168.1.200]
Port [7002]
SecurePort [7004]
Mon Jan 30 22:10:43 2012 <2600713279794431> Initializing lastIndex=0 for a list of length=1
Mon Jan 30 22:10:43 2012 <2600713279794431> initJVMID: Trying to locate Primary or Secondary using SrvrInfo with JVMID [-872106207]
Mon Jan 30 22:10:43 2012 <2600713279794431> initJVMID: Found Primary 192.168.1.200:7002:7004
Mon Jan 30 22:10:43 2012 <2600713279794431> INFO: Closing SSL context
Mon Jan 30 22:10:43 2012 <2600713279794431> .....internal request /bea_wls_internal/WLDummyInitJVMIDs.....processed
Mon Jan 30 22:10:43 2012 <2600713279794431> getPreferredFromCookie: Found 1 servers
Mon Jan 30 22:10:43 2012 <2600713279794431> attempt #0 out of a max of 5
Mon Jan 30 22:10:43 2012 <2600713279794431> trying connect to PRIMARY '192.168.1.200'/7002/7004
Mon Jan 30 22:10:43 2012 <2600713279794431> getPooledConn: No more connections in the pool for Host[192.168.1.200] Port[7002] SecurePort[7004]
Mon Jan 30 22:10:43 2012 <2600713279794431> New SSL URL: match = 0 oid = 22
Mon Jan 30 22:10:43 2012 <2600713279794431> Connect returns -1, and error no set to 150, msg 'Operation now in progress'
Mon Jan 30 22:10:43 2012 <2600713279794431> EINPROGRESS in connect() - selecting
Mon Jan 30 22:10:43 2012 <2600713279794431> Setting peerID for new SSL connection
Mon Jan 30 22:10:43 2012 <2600713279794431> 0ae2 0436 0000 1b5c ...6...\
Mon Jan 30 22:10:43 2012 <2600713279794431> Local Port of the socket is 39186
Mon Jan 30 22:10:43 2012 <2600713279794431> Remote Host 192.168.1.200 Remote Port 7004
Mon Jan 30 22:10:43 2012 <2600713279794431> created a new connection to preferred server '192.168.1.200/7004' for '/xlWebApp/images/spacer.gif', Local port:39186
Mon Jan 30 22:10:43 2012 <2600713279794431> INFO: CA certificate missing basicConstraints, validation failed
Mon Jan 30 22:10:43 2012 <2600713279794431> ERROR: SSLWrite failed
Mon Jan 30 22:10:43 2012 <2600713279794431> SEND failed (ret=-1) at 793 of file ../nsapi/URL.cpp
Mon Jan 30 22:10:43 2012 <2600713279794431> *******Exception type [WRITE_ERROR_TO_SERVER] raised at line 794 of ../nsapi/URL.cpp
Mon Jan 30 22:10:43 2012 <2600713279794431> Marking 192.168.1.200:7004 as bad
Mon Jan 30 22:10:43 2012 <2600713279794431> got exception in sendRequest phase: WRITE_ERROR_TO_SERVER [os error=0, line 794 of ../nsapi/URL.cpp]: at line 3160
Mon Jan 30 22:10:43 2012 <2600713279794431> INFO: Closing SSL context
Mon Jan 30 22:10:43 2012 <2598413279794431>
================New Request: [GET /images/cab.gif HTTP/1.1] =================
Mon Jan 30 22:10:43 2012 <2598413279794431> INFO: SSL is configured
Mon Jan 30 22:10:43 2012 <2598413279794431> SSL Main Context not set. Calling InitSSL
Mon Jan 30 22:10:43 2012 <2598413279794431> INFO: SSL configured successfully
Mon Jan 30 22:10:43 2012 <2598413279794431> Using Uri /images/cab.gif
Mon Jan 30 22:10:43 2012 <2598413279794431> After trimming path: '/images/cab.gif'
Mon Jan 30 22:10:43 2012 <2598413279794431> adding prepend path: /xlWebApp/
Mon Jan 30 22:10:43 2012 <2598413279794431> The final request string is '/xlWebApp/images/cab.gif'
Mon Jan 30 22:10:43 2012 <2598413279794431> Host extracted from serverlist is [192.168.1.100]
Mon Jan 30 22:10:43 2012 <2598413279794431> Host extracted from serverlist is [192.168.1.200]
Mon Jan 30 22:10:43 2012 <2598413279794431> Initializing lastIndex=0 for a list of length=2
Mon Jan 30 22:10:43 2012 <2598413279794431> getListNode: created a new server node: id='192.168.1.100:7004,192.168.1.200:7004' server_name='OIMSERVER', port='443'
Mon Jan 30 22:10:43 2012 <2598413279794431> getPreferred: availcookie=[JSESSIONID=6RGCPnbTFRG7LBrTRpFnv1QLnQHkxkqr4pjGhhGJyrJWJ1rv86NK!-872106207!NONE]
Mon Jan 30 22:10:43 2012 <2598413279794431> Found cookie from cookie header: JSESSIONID=6RGCPnbTFRG7LBrTRpFnv1QLnQHkxkqr4pjGhhGJyrJWJ1rv86NK!-872106207!NONE
Mon Jan 30 22:10:43 2012 <2598413279794431> Parsing cookie JSESSIONID=6RGCPnbTFRG7LBrTRpFnv1QLnQHkxkqr4pjGhhGJyrJWJ1rv86NK!-872106207!NONE
Mon Jan 30 22:10:43 2012 <2598413279794431> getpreferredServersFromCookie: [-872106207!NONE]
Mon Jan 30 22:10:43 2012 <2598413279794431> primaryJVMID: [-872106207]
secondaryJVMID: [NONE]
Mon Jan 30 22:10:43 2012 <2598413279794431> No of JVMIDs found in cookie: 1
Mon Jan 30 22:10:43 2012 <2598413279794431> getPreferredFromCookie: Start Position is 0, listLen is 2
Mon Jan 30 22:10:43 2012 <2598413279794431> getPreferredFromCookie: Either JVMIDs not set or they are stale. Will try to get JVMIDs from WLS
Mon Jan 30 22:10:43 2012 <2598413279794431> initJVMID: Iterating SrvrList from position 0
Mon Jan 30 22:10:43 2012 <2598413279794431> ======internal request /bea_wls_internal/WLDummyInitJVMIDs======
initJVMID: Trying Host[192.168.1.100] Port[7004] SecurePort[7004] useSSL [1] ioTimeout [30] socketTimeout [2]
Mon Jan 30 22:10:43 2012 <2598413279794431> New SSL URL: match = 0 oid = 0
Mon Jan 30 22:10:43 2012 <2598413279794431> Connect returns -1, and error no set to 146, msg 'Connection refused'
Mon Jan 30 22:10:43 2012 <2598413279794431> Error connecting to host 192.168.1.100:7004
Mon Jan 30 22:10:43 2012 <2598413279794431> *******Exception type [CONNECTION_REFUSED] (Error connecting to host 192.168.1.100:7004 errno = 146) raised at line 1723 of ../nsapi/URL.cpp
Mon Jan 30 22:10:43 2012 <2598413279794431> initJVMID: Failed to retrieved JVMID for 192.168.1.100:7004:7004
Mon Jan 30 22:10:43 2012 <2598413279794431> initJVMID: Marked server as BAD
Mon Jan 30 22:10:43 2012 <2598413279794431> INFO: Closing SSL context
Mon Jan 30 22:10:43 2012 <2598413279794431> .....internal request /bea_wls_internal/WLDummyInitJVMIDs.....processed
Mon Jan 30 22:10:43 2012 <2598413279794431> ======internal request /bea_wls_internal/WLDummyInitJVMIDs======
initJVMID: Trying Host[192.168.1.200] Port[7004] SecurePort[7004] useSSL [1] ioTimeout [30] socketTimeout [2]
Mon Jan 30 22:10:43 2012 <2598413279794431> New SSL URL: match = 0 oid = 0
Mon Jan 30 22:10:43 2012 <2598413279794431> Connect returns -1, and error no set to 150, msg 'Operation now in progress'
Mon Jan 30 22:10:43 2012 <2598413279794431> EINPROGRESS in connect() - selecting
Mon Jan 30 22:10:43 2012 <2598413279794431> Setting peerID for new SSL connection
Mon Jan 30 22:10:43 2012 <2598413279794431> 0ae2 0436 0000 1b5c ...6...\
Mon Jan 30 22:10:43 2012 <2598413279794431> Local Port of the socket is 39188
Mon Jan 30 22:10:43 2012 <2598413279794431> Remote Host 192.168.1.200 Remote Port 7004
Mon Jan 30 22:10:43 2012 <2598413279794431> INFO: Certificate validation succeeded
Mon Jan 30 22:10:43 2012 <2598413279794431> INFO: Negotiated to cipher: 3
Mon Jan 30 22:10:43 2012 <2598413279794431> SSLWrite sent 171
Mon Jan 30 22:10:43 2012 <2598413279794431> SSLWrite completed, sent 171
Mon Jan 30 22:10:43 2012 <2598413279794431> Reader::fill() SSLRead returned: 0 290
Mon Jan 30 22:10:43 2012 <2598413279794431> URL::parseHeaders: CompleteStatusLine set to [HTTP/1.1 404 Not Found]
Mon Jan 30 22:10:43 2012 <2598413279794431> URL::parseHeaders: StatusLine set to [404 Not Found]
Mon Jan 30 22:10:43 2012 <2598413279794431> parsed all headers OK
Mon Jan 30 22:10:43 2012 <2598413279794431> Parsing cluster list: -872106207!182584374!7002!7004
Mon Jan 30 22:10:43 2012 <2598413279794431> parseJVMID: Parsing JVMID '-872106207!182584374!7002!7004'
Mon Jan 30 22:10:43 2012 <2598413279794431> parseJVMID: Actually parsing '-872106207!182584374!7002!7004'
Mon Jan 30 22:10:43 2012 <2598413279794431> ServerInfo struct for JVMID '-872106207' populated
Server Details are:
OrigHostInfo [192.168.1.200]
isOrigHostInfoDNS [0]
Host [192.168.1.200]
Port [7002]
SecurePort [7004]
Mon Jan 30 22:10:43 2012 <2598413279794431> Initializing lastIndex=0 for a list of length=1
Mon Jan 30 22:10:43 2012 <2598413279794431> initJVMID: Trying to locate Primary or Secondary using SrvrInfo with JVMID [-872106207]
Mon Jan 30 22:10:43 2012 <2598413279794431> initJVMID: Found Primary 192.168.1.200:7002:7004
Mon Jan 30 22:10:43 2012 <2598413279794431> INFO: Closing SSL context
Mon Jan 30 22:10:43 2012 <2598413279794431> .....internal request /bea_wls_internal/WLDummyInitJVMIDs.....processed
Mon Jan 30 22:10:43 2012 <2598413279794431> getPreferredFromCookie: Found 1 servers
Mon Jan 30 22:10:43 2012 <2598413279794431> attempt #0 out of a max of 5
Mon Jan 30 22:10:43 2012 <2598413279794431> trying connect to PRIMARY '192.168.1.200'/7002/7004
Mon Jan 30 22:10:43 2012 <2598413279794431> getPooledConn: No more connections in the pool for Host[192.168.1.200] Port[7002] SecurePort[7004]
Mon Jan 30 22:10:43 2012 <2598413279794431> New SSL URL: match = 0 oid = 22
Mon Jan 30 22:10:43 2012 <2598413279794431> Connect returns -1, and error no set to 150, msg 'Operation now in progress'
Mon Jan 30 22:10:43 2012 <2598413279794431> EINPROGRESS in connect() - selecting
Mon Jan 30 22:10:43 2012 <2598413279794431> Setting peerID for new SSL connection
Mon Jan 30 22:10:43 2012 <2598413279794431> 0ae2 0436 0000 1b5c ...6...\
Mon Jan 30 22:10:43 2012 <2598413279794431> Local Port of the socket is 39189
Mon Jan 30 22:10:43 2012 <2598413279794431> Remote Host 192.168.1.200 Remote Port 7004
Mon Jan 30 22:10:43 2012 <2598413279794431> created a new connection to preferred server '192.168.1.200/7004' for '/xlWebApp/images/cab.gif', Local port:39189
Mon Jan 30 22:10:43 2012 <2598413279794431> INFO: CA certificate missing basicConstraints, validation failed
Mon Jan 30 22:10:43 2012 <2598413279794431> ERROR: SSLWrite failed
Mon Jan 30 22:10:43 2012 <2598413279794431> SEND failed (ret=-1) at 793 of file ../nsapi/URL.cpp
Mon Jan 30 22:10:43 2012 <2598413279794431> *******Exception type [WRITE_ERROR_TO_SERVER] raised at line 794 of ../nsapi/URL.cpp
Mon Jan 30 22:10:43 2012 <2598413279794431> Marking 192.168.1.200:7004 as bad
Mon Jan 30 22:10:43 2012 <2598413279794431> got exception in sendRequest phase: WRITE_ERROR_TO_SERVER [os error=0, line 794 of ../nsapi/URL.cpp]: at line 3160
Mon Jan 30 22:10:43 2012 <2598413279794431> INFO: Closing SSL context
Thanks

"One of the tests is to lose one of the nodes for the apache plugin redirects the node that has less overhead."
Note that the plug-in does a round robin load balancing, for example, in the case of three server (1,2,3) it does 1-2-3-1-2-3-1...
with server 3 going down it does 1-2-1-2-1...
An example configuration (with SSL off) looks as follows:
LoadModule weblogic_module   "/home/oracle/weblogic12.1.1/apache/modules/mod_wl.so"
<IfModule weblogic_module>
     ConnectTimeoutSecs 10
     ConnectRetrySecs 2
     DebugConfigInfo ON
     WLSocketTimeoutSecs 2
     WLIOTimeoutSecs 300
     Idempotent ON
     FileCaching ON
     KeepAliveSecs 20
     KeepAliveEnabled ON
     DynamicServerList ON
     WLProxySSL OFF
</IfModule>
<Location /LoadTest6>
     SetHandler weblogic-handler
     WebLogicCluster 172.31.0.175:7002,172.31.0.113:7003
</Location>Also see the complete example here: http://middlewaremagic.com/weblogic/?p=7795
"the plugin sometimes redirects to the other active node"
This is somewhat strange, do you have session binding turned off?
"and on another occasion shows the oracle management console identity manager without the colors of the basic look and feel."
This could happen due to mime types (not really sure just a hunch). Here is a general story on this concept: https://developer.mozilla.org/en/Properly_Configuring_Server_MIME_Types
and the apache module: http://httpd.apache.org/docs/2.2/mod/mod_mime.html

Remote debugging issue: Address already in use

First, I want to explain that to use remote debugging in oracle UCM server (IdcServerNT.exe), I add these lines at */server/bin/intradoc.cfg*:
JAVA_OPTIONS_debug_enable=-Xdebug
JAVA_OPTIONS_debug_options=-Xrunjdwp:transport=dt_socket,server=y,address=8000,suspend=n
and since the JAVA_OPTIONS is shared between admin server (IdcAdminNT.exe) and non-admin server (IdcServerNT.exe), to prevent "Address already in use" error, I added same lines but with empty value into */server/admin/bin/intradoc.cfg*:
JAVA_OPTIONS_debug_enable=
JAVA_OPTIONS_debug_options=
or alternatively enable it but use different port for the "address=xxx".
Now the issue is when I had run the non-admin UCM server with remote debugging enabled, then I tried to run the Component Wizard, I got "Address already in use" error:
ERROR: transport error 202: bind failed: Address already in use ["transport.c",L41]
I found out that's possible because Component Wizard (ComponentWizard.exe) is using same setting file with non-admin server (IdcServerNT.exe): */server/bin/intradoc.cfg*. It's obvious that happened because of ComponentWizard.exe is in same location with IdcServerNT.exe, so I think other tools like Batch Loader and System Properties will be affected with same issue too.
Because of this issue, everytime I want to open Component Wizard, I had to stop the non-admin server which is inconvenient.
So, the question is there a way to define separately or disable the JAVA_OPTIONS_debug_enable & JAVA_OPTIONS_debug_options for Component Wizard?

WillT wrote:
My run method was being called somewhere else and I can't find out whereOkay, but changing from implementing Runnable to extending Thread won't change that one whit. You must've also changed something else.
Extending Thread is the wrong approach, since you're not creating a special kind of Thread.

Remote debugging the Oracle weblogic 10.3.3 from eclipse

Similar Messages

Maybe you are looking for