ECM Error : Budget not obtained for an Employee

Hi Experts,
While creating running program pecm_create_comp_pro; it show an error message that
"Budget for Employee could not been obtained"
Even same message is reflecting in IT0759 and Portal.Please let me know how to assign the Budget to an Employee comes under the organization unit. I have created Budget to Organization Unit and released.
Thanks in Advance
Awaiting for your valuable reply

Hi vnk,
We have a scenario wherein we need to maintain a Budget for Org Units.
1. We are using the BSP appln HRECM_BDG_MAINT to maintain Budget against Org Units
2. Whenever we maintain a budget for an Org Unit say, Org01, Budget Unit for the child org units also get created automatically.
3. Customer would like to maintain the Budget at a higher level Org Unit and wants the child Org Unit to use the same Budget.
4. Standard ECM Budgetting does that, i.e., whenever it fails to lookup for a Budget Unit mapped directly to the Org Unit, it goes further up to get the budget from the parent Org Unit.
5. Is there a way to restrict the child Org Units having their own Budget Unit?
Please suggest
Regards,
Mathan

Similar Messages

ESI is not deducting for an employee who has joined after 23?

Dear All,
With reference to issue, ESI is not deducting for the employee who has joined on or after 23 of march month.
Ex. He has gross of 9400 and /3EA is 2729 and the value of contribution is 45. But ESI is not deducting.
But for other employee same salary and he has joined on 16 march,for him ESI is deducting.
Thanks for all,
Regards,
Sujesh R

Wrong forum.
FF

Install error- key not valid for use in specified state

after downloading and starting installation I keep getting the error "key not valid for use in specified state"
I am using an administrator account and have selected to run the install application as an administrator.
What is causing this?

Generally this error happens because of an encrypted folder or insufficient permissions on that folder: http://support.microsoft.com/kb/834484 (MS Explanation)
Adobe has a page here: Error 1603: A fatal error occurred during installation

- 0 fatal error(s), 3 error(s) ----------- Payload: Adobe Photoshop Lightroom 5 5.6.0.0 Adobe_Lightroom_x64.msi_5.6 ----------- ERROR: Key not valid for use in specified state. ERROR: Install MSI payload failed with error: 1603 - Fatal error durin

I keep getting this error code when trying to download
- 0 fatal error(s), 3 error(s) ----------- Payload: Adobe Photoshop Lightroom 5 5.6.0.0 Adobe_Lightroom_x64.msi_5.6 ----------- ERROR: Key not valid for use in specified state. ERROR: Install MSI payload failed with error: 1603 - Fatal error during installation. MSI Error message: Key not valid for use in specified state. ERROR: Third party payload installer Adobe_Lightroom_x64.msi failed with exit code: 1603

Generally this error happens because of an encrypted folder or insufficient permissions on that folder: http://support.microsoft.com/kb/834484 (MS Explanation)
Adobe has a page here: Error 1603: A fatal error occurred during installation

Pending Move Transaction ****Error: Status not applicable for this Locator.

Hi guys,
Let me know if you have experienced the following error in the pending move tranasctions with Back flush process?
Message error:
Status not applicable for this Locator.
Transaction processor error
Thanks,

the receiving with locator works only if there is a valid default locator defined in the system.
There is no option to enter the Locator manually in the receiving pages of iProcurement.
Locator and/or serial controlled Items must be received in the Core PO Receipt Form and not in iProcurement.
Cannot Receive Requisitions For Inventory Items Which Are Locator And/Or Serial Controlled (Doc ID 809408.1)
Also refer to the below,
Unable To Receive Inventory Item In iProcurement or Core Apps Receiving Due To Locator Error (Doc ID 819083.1)

Error: "can not scan for wireless networks" 1st gen iphone running 3.1.2

My iphone will no longer scan for wireless networks. I am running an airport network via my imac and the rest of the computers, as well as two iphone 3GS phones can see it, but my 1st Gen iphone now gives me the error "can not scan for wireless networks". I have done the Home + Power button thing, reset the network settings and no help yet.
Any suggestions?

OK. There are reports of bad wifi chips, but lets try some more things first.
I assume your router is set to b/g compatible & not "n" only, correct? The iphone only works on g. Next, try this: Shut down the WiFi, and turn off "Ask to Join Networks". Then turn the iPhone completely off, by holding the top button down until the red slider came up, slid it off, and wait a few moments.
Turn the phone back on, then turn on the WiFi, and then "Ask to Join Networks".
See if that helps.

Income Tax not Calculated for one employee.

Hi experts,
we have updated our patch lvl upto 86. Budget Changes Note is applied already. Now the Problem is with one employee.
Out of 1000 employees for one employee /436, /446 and /450 generated correctly with correct figure. But /460 is not generated.
I can see in the log /451 is generated with the amount exactly as /450.
Why system is not generating /460?
Can anyone guide me?
Regards
Nasim

Well the reaults are surprising as cross financial arrear /616 is only 1385.96 and relief generated by this is 18776. Which is simply not possible. Even in FY 2010-2011 relief should not be generated as relief only comes when employee is end up paying more taxes than last year tax on arrears. Now since tax slabs are increased, relief will not be egenrated.
This issue you can check with OSS message.
IF you want to deactivate the Section 89 relief implementation switch S89SW constant as 0 in table V_T511K. It may also activated on employee level, then you need to check IT0588/ subtype 4. Before deactivating it check out the impact after deactivation in case of retro as i may increase/ decrease the past tax.
Please note that implementation level switch supposed to be activated/ deactivated only once in lifetime of SAP system.

Error in self service for my employee - Related Activities in MSS

Hi,
NW2004s SP9 EP7.0 ECC 6.0
we are trying to implement the self service for my employee in related activites functinality from the general information of team workset ( Team --> General informatio --> Related activities --> Self service for my employee ) in MSS which is a replicaiton of ESS in MSS functionality from the previous versions.
When
I click on any of the options like Personal data or Addresses it gives me a blank page with no information on it. (It does give a DONE message with error/warning message on the status bar of Internet explorer. The error message says getactivetrackingEntryValue() is null)
Do I need to do anything to get this page working. I do not see any config related to this.
Appreciate any inputs.
regards
sam

James,
I think the note refers to note been able to display the general infromation iView itself. I have implemented the note and am able to see the genral information iView. My issue is I am not able to perform "Self service for my employees" in "related activities" iView.
Thank for you reply and correct me if I am wrong.
Sanjay, I have raised the issue with SAP, in the mean while if you can please let me know the patches or a list of them that are requried thyat would be awesome. Sorry for asking you this, but the basis team here asks to tell them what is requried even though I do not have sufficient authorizations to check them.
Appreciate you help on the same.
regards
Sam

Personal Data not working for an employee in ESS

Hai All,
I have configured Personal Data in ESS. But, for a particular employee Personal Data is giving the below mentioned error when he edits the data. The error happens when he edits and clicks on Review or when he clicks on the dropdown for Nationality(Only for this field, the error occurs) and selects a value from that dropdown.
As I searched in the forum, I found that we have to search ST22 for that user. In ST22, it is throwing 4 errors:
1. UNCAUGHT_EXCEPTION CX_HRPA_INVALID_INFOTYPE_DB. The exception 'CX_HRPA_INVALID_INFOTYPE_DB' was raised, but it was not caught anywhere along the call hierarchy. Termination occurred in the ABAP program "CL_HRPA_TIMECONSTRAINT========CP" - in "COMPUTE_INSERT". The main program was "SAPMSSY1 ".
2. SYSTEM_CANCELED. The current program "CL_HRPA_TIMECONSTRAINT========CP" has been terminated by another mode.
3. OBJECTS_OBJREF_NOT_ASSIGNED_NO CX_SY_REF_IS_INITIAL. Termination occurred in the ABAP program "SAPLHRXSS_PER_MAC" - in "HRXSS_PER_CLEANUP".
The main program was "SAPMSSY1 ".
4. SYSTEM_CANCELED. The current program "SAPLHRXSS_PER_MAC" has been terminated by another mode.
My questions are:
a Why it is not working for a particular employee?
b Why it is working for other employees?
c Did I miss out some configurations?
Please help me out.
Regards,
Jubish

Hai,
Thankyou for the reply. But the user has entry in the infotype. Likewise, it is possible to change data from PA30 transaction also. The problem occurs only when I try to change data through ESS.
Regards,
Jubish

ESI not coming for some employees

Hi,
For some Employees ESIC is not Deducting, though i have maintained Infotype 0588, but for some employees its coming...and in RT table Employer ESIC Contribution is coming, but in payslip Employees ESIC is not coming...please help me in this issue...
Thanks & Regards
Ragini NIkam
SAP-HR Consultant

Hi,
Please confirm the followings:
a) Are you able to see /3E1 & /3E1 for those cases in RT?
Ans: In RT Table only i am able to see /3er and not /3e1
b) Value of /112
Ans: /112 is coming Rs. 7988.50 thats my gross amount
c) Validity of IT0588 (ESI)Please confirm the followings:
Ans: Validity is 01.04.2011 to 31.12.9999,
But sir how its coming for some employees and and for some its not.
Thanks & Regards
RAGINI Nikam
SAP-HR Consultant

AnyConnect error " User not authorized for AnyConnect Client access, contact your administrator"

Hi everyone,
it's probably just me but I have tried real hard to get a simple AnyConnect setup working in a lab environment on my ASA 5505 at home, without luck. When I connect with the AnyConnect client I get the error message "User not authorized for AnyConnect Client access, contact your administrator". I have searched for this error and tried some of the few solutions out there, but to no avail. I also updated the ASA from 8.4.4(1) to 9.1(1) and ASDM from 6.4(9) to 7.1(1) but still the same problem. The setup of the ASA is straight forward, directly connected to the Internet with a 10.0.1.0 / 24 subnet on the inside and an address pool of 10.0.2.0 / 24 to assign to the VPN clients. Please note that due to ISP restrictions, I'm using port 44455 instead of 443. I had AnyConnect working with the SSL portal, but IKEv2 IPsec is giving me a headache. I have stripped down certificate authentication which I had running before just to eliminate this as a potential cause of the issue. When running debugging, I do not get any error messages - the handshake completes successfully and the local authentication works fine as well.
Please find the current config and debugging output below. I appreciate any pointers as to what might be wrong here.
: Saved
ASA Version 9.1(1)
hostname ASA
domain-name ingo.local
enable password ... encrypted
xlate per-session deny tcp any4 any4
xlate per-session deny tcp any4 any6
xlate per-session deny tcp any6 any4
xlate per-session deny tcp any6 any6
xlate per-session deny udp any4 any4 eq domain
xlate per-session deny udp any4 any6 eq domain
xlate per-session deny udp any6 any4 eq domain
xlate per-session deny udp any6 any6 eq domain
passwd ... encrypted
names
name 10.0.1.0 LAN-10-0-1-x
dns-guard
ip local pool VPNPool 10.0.2.1-10.0.2.10 mask 255.255.255.0
interface Ethernet0/0
switchport access vlan 2
interface Ethernet0/1
interface Ethernet0/2
interface Ethernet0/3
interface Ethernet0/4
interface Ethernet0/5
interface Ethernet0/6
interface Ethernet0/7
interface Vlan1
nameif Internal
security-level 100
ip address 10.0.1.254 255.255.255.0
interface Vlan2
nameif External
security-level 0
ip address dhcp setroute
regex BlockFacebook "facebook.com"
banner login This is a monitored system. Unauthorized access is prohibited.
boot system disk0:/asa911-k8.bin
ftp mode passive
clock timezone PST -8
clock summer-time PDT recurring
dns domain-lookup Internal
dns domain-lookup External
dns server-group DefaultDNS
name-server 10.0.1.11
name-server 75.153.176.1
name-server 75.153.176.9
domain-name ingo.local
object network obj_any
subnet 0.0.0.0 0.0.0.0
object network LAN-10-0-1-x
subnet 10.0.1.0 255.255.255.0
object network Company-IP1
host xxx.xxx.xxx.xxx
object network Company-IP2
host xxx.xxx.xxx.xxx
object network HYPER-V-DUAL-IP
range 10.0.1.1 10.0.1.2
object network LAN-10-0-1-X
access-list 100 extended permit tcp any4 object HYPER-V-DUAL-IP eq 3389 inactive
access-list 100 extended permit tcp object Company-IP1 object HYPER-V-DUAL-IP eq 3389
access-list 100 extended permit tcp object Company-IP2 object HYPER-V-DUAL-IP eq 3389
tcp-map Normalizer
check-retransmission
checksum-verification
no pager
logging enable
logging timestamp
logging list Threats message 106023
logging list Threats message 106100
logging list Threats message 106015
logging list Threats message 106021
logging list Threats message 401004
logging buffered errors
logging trap Threats
logging asdm debugging
logging device-id hostname
logging host Internal 10.0.1.11 format emblem
logging ftp-bufferwrap
logging ftp-server 10.0.1.11 / asa *****
logging permit-hostdown
mtu Internal 1500
mtu External 1500
ip verify reverse-path interface Internal
ip verify reverse-path interface External
icmp unreachable rate-limit 1 burst-size 1
icmp deny any echo External
asdm image disk0:/asdm-711.bin
no asdm history enable
arp timeout 14400
no arp permit-nonconnected
object network obj_any
nat (Internal,External) dynamic interface
object network LAN-10-0-1-x
nat (Internal,External) dynamic interface
object network HYPER-V-DUAL-IP
nat (Internal,External) static interface service tcp 3389 3389
access-group 100 in interface External
timeout xlate 3:00:00
timeout pat-xlate 0:00:30
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00
timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00
timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
timeout floating-conn 0:00:00
dynamic-access-policy-record DfltAccessPolicy
aaa-server radius protocol radius
aaa-server radius (Internal) host 10.0.1.11
key *****
radius-common-pw *****
user-identity default-domain LOCAL
aaa authentication ssh console radius LOCAL
http server enable
http LAN-10-0-1-x 255.255.255.0 Internal
no snmp-server location
no snmp-server contact
snmp-server enable traps snmp authentication linkup linkdown coldstart
crypto ipsec ikev2 ipsec-proposal DES
protocol esp encryption des
protocol esp integrity sha-1 md5
crypto ipsec ikev2 ipsec-proposal 3DES
protocol esp encryption 3des
protocol esp integrity sha-1 md5
crypto ipsec ikev2 ipsec-proposal AES
protocol esp encryption aes
protocol esp integrity sha-1 md5
crypto ipsec ikev2 ipsec-proposal AES192
protocol esp encryption aes-192
protocol esp integrity sha-1 md5
crypto ipsec ikev2 ipsec-proposal AES256
protocol esp encryption aes-256
protocol esp integrity sha-1 md5
crypto ipsec security-association pmtu-aging infinite
crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 set ikev2 ipsec-proposal AES256 AES192 AES 3DES DES
crypto map External_map 65535 ipsec-isakmp dynamic SYSTEM_DEFAULT_CRYPTO_MAP
crypto map External_map interface External
crypto ca trustpoint srv01_trustpoint
enrollment terminal
crl configure
crypto ca trustpoint asa_cert_trustpoint
keypair asa_cert_trustpoint
crl configure
crypto ca trustpoint LOCAL-CA-SERVER
keypair LOCAL-CA-SERVER
crl configure
crypto ca trustpool policy
crypto ca server
cdp-url http://.../+CSCOCA+/asa_ca.crl:44435
issuer-name CN=...
database path disk0:/LOCAL_CA_SERVER/
smtp from-address ...
publish-crl External 44436
crypto ca certificate chain srv01_trustpoint
certificate <output omitted>
quit
crypto ca certificate chain asa_cert_trustpoint
certificate <output omitted>
quit
crypto ca certificate chain LOCAL-CA-SERVER
certificate <output omitted>
quit
crypto ikev2 policy 1
encryption aes-256
integrity sha
group 5 2
prf sha
lifetime seconds 86400
crypto ikev2 policy 10
encryption aes-192
integrity sha
group 5 2
prf sha
lifetime seconds 86400
crypto ikev2 policy 20
encryption aes
integrity sha
group 5 2
prf sha
lifetime seconds 86400
crypto ikev2 policy 30
encryption 3des
integrity sha
group 5 2
prf sha
lifetime seconds 86400
crypto ikev2 policy 40
encryption des
integrity sha
group 5 2
prf sha
lifetime seconds 86400
crypto ikev2 enable External client-services port 44455
crypto ikev2 remote-access trustpoint asa_cert_trustpoint
telnet timeout 5
ssh LAN-10-0-1-x 255.255.255.0 Internal
ssh xxx.xxx.xxx.xxx 255.255.255.255 External
ssh xxx.xxx.xxx.xxx 255.255.255.255 External
ssh timeout 5
ssh version 2
console timeout 0
no vpn-addr-assign aaa
no ipv6-vpn-addr-assign aaa
no ipv6-vpn-addr-assign local
dhcpd dns 75.153.176.9 75.153.176.1
dhcpd domain ingo.local
dhcpd option 3 ip 10.0.1.254
dhcpd address 10.0.1.50-10.0.1.81 Internal
dhcpd enable Internal
threat-detection basic-threat
threat-detection scanning-threat shun except ip-address LAN-10-0-1-x 255.255.255.0
threat-detection statistics access-list
threat-detection statistics tcp-intercept rate-interval 30 burst-rate 400 average-rate 200
dynamic-filter use-database
dynamic-filter enable interface Internal
dynamic-filter enable interface External
dynamic-filter drop blacklist interface Internal
dynamic-filter drop blacklist interface External
ntp server 128.233.3.101 source External
ntp server 128.233.3.100 source External prefer
ntp server 204.152.184.72 source External
ntp server 192.6.38.127 source External
ssl encryption aes256-sha1 aes128-sha1 3des-sha1
ssl trust-point asa_cert_trustpoint External
webvpn
port 44433
enable External
dtls port 44433
anyconnect image disk0:/anyconnect-win-3.1.02026-k9.pkg 1
anyconnect profiles profile1 disk0:/profile1.xml
anyconnect enable
smart-tunnel list SmartTunnelList1 mstsc mstsc.exe platform windows
smart-tunnel list SmartTunnelList1 putty putty.exe platform windows
group-policy DfltGrpPolicy attributes
vpn-tunnel-protocol ikev1 ikev2 l2tp-ipsec ssl-client ssl-clientless
webvpn
anyconnect profiles value profile1 type user
username write.ingo password ... encrypted
username ingo password ... encrypted privilege 15
username tom.tucker password ... encrypted
class-map TCP
match port tcp range 1 65535
class-map type regex match-any BlockFacebook
match regex BlockFacebook
class-map type inspect http match-all BlockDomains
match request header host regex class BlockFacebook
class-map inspection_default
match default-inspection-traffic
policy-map type inspect dns preset_dns_map
parameters
message-length maximum client auto
message-length maximum 1500
id-randomization
policy-map TCP
class TCP
set connection conn-max 1000 embryonic-conn-max 1000 per-client-max 250 per-client-embryonic-max 250
set connection timeout dcd
set connection advanced-options Normalizer
set connection decrement-ttl
policy-map type inspect http HTTP
parameters
protocol-violation action drop-connection log
class BlockDomains
policy-map global_policy
class inspection_default
inspect ftp
inspect h323 h225
inspect h323 ras
inspect rsh
inspect rtsp
inspect esmtp
inspect sqlnet
inspect skinny
inspect sunrpc
inspect xdmcp
inspect sip
inspect netbios
inspect tftp
inspect ip-options
inspect dns preset_dns_map dynamic-filter-snoop
inspect http HTTP
service-policy global_policy global
service-policy TCP interface External
smtp-server 199.185.220.249
privilege cmd level 3 mode exec command perfmon
privilege cmd level 3 mode exec command ping
privilege cmd level 3 mode exec command who
privilege cmd level 3 mode exec command logging
privilege cmd level 3 mode exec command failover
privilege cmd level 3 mode exec command vpn-sessiondb
privilege cmd level 3 mode exec command packet-tracer
privilege show level 5 mode exec command import
privilege show level 5 mode exec command running-config
privilege show level 3 mode exec command reload
privilege show level 3 mode exec command mode
privilege show level 3 mode exec command firewall
privilege show level 3 mode exec command asp
privilege show level 3 mode exec command cpu
privilege show level 3 mode exec command interface
privilege show level 3 mode exec command clock
privilege show level 3 mode exec command dns-hosts
privilege show level 3 mode exec command access-list
privilege show level 3 mode exec command logging
privilege show level 3 mode exec command vlan
privilege show level 3 mode exec command ip
privilege show level 3 mode exec command failover
privilege show level 3 mode exec command asdm
privilege show level 3 mode exec command arp
privilege show level 3 mode exec command ipv6
privilege show level 3 mode exec command route
privilege show level 3 mode exec command ospf
privilege show level 3 mode exec command aaa-server
privilege show level 3 mode exec command aaa
privilege show level 3 mode exec command eigrp
privilege show level 3 mode exec command crypto
privilege show level 3 mode exec command ssh
privilege show level 3 mode exec command vpn-sessiondb
privilege show level 3 mode exec command vpnclient
privilege show level 3 mode exec command vpn
privilege show level 3 mode exec command dhcpd
privilege show level 3 mode exec command blocks
privilege show level 3 mode exec command wccp
privilege show level 3 mode exec command dynamic-filter
privilege show level 3 mode exec command webvpn
privilege show level 3 mode exec command service-policy
privilege show level 3 mode exec command module
privilege show level 3 mode exec command uauth
privilege show level 3 mode exec command compression
privilege show level 3 mode configure command interface
privilege show level 3 mode configure command clock
privilege show level 3 mode configure command access-list
privilege show level 3 mode configure command logging
privilege show level 3 mode configure command ip
privilege show level 3 mode configure command failover
privilege show level 5 mode configure command asdm
privilege show level 3 mode configure command arp
privilege show level 3 mode configure command route
privilege show level 3 mode configure command aaa-server
privilege show level 3 mode configure command aaa
privilege show level 3 mode configure command crypto
privilege show level 3 mode configure command ssh
privilege show level 3 mode configure command dhcpd
privilege show level 5 mode configure command privilege
privilege clear level 3 mode exec command dns-hosts
privilege clear level 3 mode exec command logging
privilege clear level 3 mode exec command arp
privilege clear level 3 mode exec command aaa-server
privilege clear level 3 mode exec command crypto
privilege clear level 3 mode exec command dynamic-filter
privilege cmd level 3 mode configure command failover
privilege clear level 3 mode configure command logging
privilege clear level 3 mode configure command arp
privilege clear level 3 mode configure command crypto
privilege clear level 3 mode configure command aaa-server
prompt hostname context
no call-home reporting anonymous
call-home
profile CiscoTAC-1
no active
destination address http https://tools.cisco.com/its/service/oddce/services/DDCEService
destination address email [email protected]
destination transport-method http
subscribe-to-alert-group diagnostic
subscribe-to-alert-group environment
subscribe-to-alert-group inventory periodic monthly
subscribe-to-alert-group configuration periodic monthly
subscribe-to-alert-group telemetry periodic daily
Cryptochecksum:41a021a28f73c647a2f550ba932bed1a
: end
Many thanks,
Ingo

Hi Jose,
here is what I got now:
ASA(config)# sh run | begin tunnel-group
tunnel-group DefaultWEBVPNGroup general-attributes
address-pool VPNPool
authorization-required
and DAP debugging still the same:
ASA(config)# DAP_TRACE: DAP_open: CDC45080
DAP_TRACE: Username: tom.tucker, aaa.cisco.grouppolicy = DfltGrpPolicy
DAP_TRACE: Username: tom.tucker, aaa.cisco.username = tom.tucker
DAP_TRACE: Username: tom.tucker, aaa.cisco.username1 = tom.tucker
DAP_TRACE: Username: tom.tucker, aaa.cisco.username2 =
DAP_TRACE: Username: tom.tucker, aaa.cisco.tunnelgroup = DefaultWEBVPNGroup
DAP_TRACE: Username: tom.tucker, DAP_add_SCEP: scep required = [FALSE]
DAP_TRACE: Username: tom.tucker, DAP_add_AC:
endpoint.anyconnect.clientversion="3.1.02026";
endpoint.anyconnect.platform="win";
DAP_TRACE: Username: tom.tucker, dap_aggregate_attr: rec_count = 1
DAP_TRACE: Username: tom.tucker, Selected DAPs: DfltAccessPolicy
DAP_TRACE: Username: tom.tucker, DAP_close: CDC45080
Unfortunately, it still doesn't work. Hmmm.. maybe a wipe of the config and starting from scratch can help?
Thanks,
Ingo

ERROR: "key not valid for use in specified state" when updating to Lightroom 5.6 in Win8.1

While doing a routine update from Lightroom 5.5 to v5.6 in Win 8.1, the installation halted at the start of the installation with the vague error message, "key not valid for use in specified state". Although v5.5 was working just fine, the install routine deleted the v5.5 application files. I rolled back to the previous system restore point (set just prior to the install) and recovered the executable files. However, now the 5.5 files won't open the default catalog, none of the backups, or even create a new catalog.
As v5.x was purchased as an update to v4.x, I've tried to reinstall the original Lightroom v4.x app from the factory disk. I get the same error.
Suggestions?
Thanks. Dan

I have a similar problem to Dan. while doing a routine upgrade from Lightroom 5.5 to 5.6 I got the
: "key not valid for use in specified state"
error and now Lightroom has completely disappeared. I've tried to uninstall, but there is nothing to uninstall. Going back to try to install the original 5.4 just results in the same error.
A problem may have been that I closed Lightroom when the upgrade started to download. It then re-opened again when the install was halfway through., I assumed that was an error and closed it. just after that the error first appeared in the installer.
I still had an older version of lightroom 4 installed. I've uninstalled it, and that didn't make any difference.
I've also tried removing anything in the registry left over from the old installs and that didn't help either.
Any suggestions?
CHeers, Angus

Goods Issue error - batches not defined for delivery item

Hi,
We are getting a Goods Issue error u201CThe batches are not defined for delivery item 000010u201D.   We are only getting this error for a material that is being shipped against a particular third party sales scheduling agreement. We went live in 2007 and we had no issues, but when we had to create a new Sched Agreement this year, for third party sales, we started to get this error. However, if we re-activate the old scheduling agreement we do not get the error. We have a batch job that executes the following steps:
1.     VL06IG (collective goods receipt)
2.     VL10 (collective delivery)
3.     VL06O (collective GI)
We have compared the 2 scheduling agreements and see no difference. We are assuming it has something to do with how the scheduling agreement was setup, but are not sure. Any suggestions on how to correct this problem would be much appreciated.
Thanks in advance,
Helen

Dear Murali,
The material has not changed at all. I'm not sure what you mean by maintaining batches while receipt of the material.
If I re-open the old scheduling agreement, we do not get the error message. However, as soon as we use the new SD scheduling agreement, we get the error. We are using the same material master on both scheduling agreements.
Thanks,
Helen

Issue installing ITunes : error key not valid for use in specified state

On the latest update for iTunes for Windows the updated couldn't complete as it gave me the following message " key not valid for use in specified state". I then completly uninstalled iTunes and its components in the order advised, rebooted my system, ran the latest ITunes setup and still get the message " key not valid for use in specified state".
I have checked all the directories to ensure no remnants.
Any one got an answer to this issue as I no longer have access to ITunes. I have a Laptop running Windows Vista Business
Thanks,
Stones of Gold

It seems we may have a more targeted solution. Based on posts in the thread key not valid for use in specified state I've just added the following to the user tip.
For "Key not valid for use in specified state" errors try moving the folder RSA from C:\Users\<User>\AppData\Roaming\Microsoft\Crypto\RSA to say C:\RSA (just in case there should be a need to restore it) then try installing again. This folder appears to act as a cache and should be rebuilt automatically as required.
tt2

ERROR: Key not valid for use in specified state

ERROR: Install MSI payload failed with error: 1603 - Fatal error during installation.
MSI Error message: Key not valid for use in specified state.

This is an old document but it does list several solutions that may be applicable: Error 1603: A fatal error occurred during installation

ECM Error : Budget not obtained for an Employee

Similar Messages

Maybe you are looking for