EDI message output for goods movements
Dear experts,
we configured NACE to send EDI messages, when goods movements are created. When we use partner type "VN" (Vendor) and leave the partner number empty, no message is created. Only if the partner number is filled, a message is created. This means, that the partner number is not extracted dynamically from the goods movement and we have to make one NACE entry for each partner. For other applications (e. g. outbound call offs), the partner number in NACE can be left empty and when a document is posted, the receiver partner number is determined dynamically.
Is it possible to modify the processing, so that the partner number is extracted from the goods movement? How can this be done?
Best regards,
David Claes
Hi,
What is the application you selecting for creating ouput?
I don't see output record condition with as combination.
You should be using ME as application area.
Thank you!
Dipak
Similar Messages
-
EDI Message output gets processed for held PO
Hi All,
When I save my purchase order as a HELD PO (EKKO-MEMORY=X), EDI Message output gets processed.
Can you please provide me any inputs to disable this.
Regards
DeepakHi All,
Can anyone provide any inputs on this.
Regards
Deepak -
The Reservation item is not allowed for goods movements
Hi Experts,
When i do the goods movements against the reservations in
MIGO, I encounter the below error.
The reservation
xxxxxxx item xxxx is not allowed for Goods Movement.
Can you please suggest on this.
Regards,
Venkat.What is the message number ?
Can you please check the goods movement allowed for reservation in MB22 : -
Message while performing goods movements in PI sheet
Dear experts,
Kindly suggest way to populate the message that system provides while performing goods movment using co11n and cor6
at the time of posting the message through PI sheet.
System usually populates message like 6 goods movement posted 1 failed using co11n or COR6 same needs to be populates while posting the messages using PI sheets.
Thanks in advance for your inputs and help..
Regards,
Nitishdear experts ,
please give your valuable input.
can we use FI_PERIOD_CHECK ?
regards
satish -
HI,
WILL ANY BODY HELP ME FOR BAPI MB1B FOR GOODS MOVEMENT 411
DEASSINGE.
I'M USING THIS BAPI FOR THE SAME
AND PASSING THIS DATA.
wa-MATERIAL = it_data-matnr.
wa-PLANT = 'SBST'.
wa-stge_loc = IT_DATA-LGORT .
wa-BATCH = it_data-charg.
wa-MOVE_TYPE = '411'.
WA-move_reas = '0003'.
WA-STCK_TYPE = 'F'.
wa-SPEC_STOCK = 'E'.
wa-val_sales_ord = it_data-vbeln.
wa-val_s_ord_item = it_data-posnr.
wa-quantity = it_data-qty .
wa-entry_qnt = it_data-qty .
WA-base_uom = 'MTS'.
WA-MOVE_MAT = it_data-matnr.
WA-MOVE_PLANT = 'SBST'.
WA-move_stloc = IT_DATA-LGORT .
WA-MOVE_BATCH = it_data-charg.
MOVE 'SBST' TO wa-tr_part_ba.
MOVE 'SBST' TO wa-move_plant.
MOVE 'X' TO wa-no_more_gr.
MOVE 'TNE' TO wa-entry_uom_iso.
MOVE 'TNE' TO wa-st_un_qtyy_2_iso.
append wa to l_it_item .
CALL FUNCTION 'BAPI_GOODSMVT_CREATE'
EXPORTING
goodsmvt_header = l_wa_header
goodsmvt_code = l_f_code
IMPORTING
goodsmvt_headret = l_wa_headret
TABLES
goodsmvt_item = l_it_item
return = lit_bapiret2.
Headling error message
IF lit_bapiret2[] IS INITIAL.
BUT IT GAVE ERROR
Reason for Mvmt 0003 not supported (check your entry)
WILL HELP
MUKESHthanks
-
Order not found or not permitted for goods movement
Hi,
I try to implement Goods Movement by using BAPI_GOODSMVT_CREATE. I try to do it over delivery number. So I use the following code. But somehow it returns "Order not found or not permitted for goods movement" error. I can do the same movement over MIGO transaction. But BAPI can not find the order. Do you have any idea? Do I miss a parameter o something?
Thanks.
data: begin of gmhead.
include structure bapi2017_gm_head_01.
data: end of gmhead.
data: begin of gmcode.
include structure bapi2017_gm_code.
data: end of gmcode.
data: begin of mthead.
include structure bapi2017_gm_head_ret.
data: end of mthead.
data: begin of itab occurs 100.
include structure bapi2017_gm_item_create.
data: end of itab.
data: begin of errmsg occurs 10.
include structure bapiret2.
data: end of errmsg.
data: wmenge like iseg-menge,
error_code(220) type C,
temp_xchpf like mara-xchpf,
sbatch like mseg-charg.
DATA : temp_vbeln LIKE likp-vbeln.
gmhead-pstng_date = sy-datum.
gmhead-doc_date = sy-datum.
gmhead-pr_uname = 'sy-uname.
gmhead-VER_GR_GI_SLIP = '1'.
gmhead-VER_GR_GI_SLIPX = 'X'.
gmcode-gm_code = '01'. " for 101
itab-mvt_ind = 'F'.
itab-plant = '0001'.
itab-entry_qnt = AMOUNT.
itab-move_type = '101'.
itab-item_text = 'invoice'.
itab-deliv_numb = temp_vbeln.
APPEND itab.
CALL FUNCTION 'BAPI_GOODSMVT_CREATE'
EXPORTING
goodsmvt_header = gmhead
goodsmvt_code = gmcode
goodsmvt_headret = mthead
TABLES
goodsmvt_item = itab
return = errmsg.
CLEAR error_code.
LOOP AT errmsg.
IF errmsg-type EQ 'E'.
error_code = errmsg-message.
ENDIF.
ENDLOOP.
IF error_code IS INITIAL.
COMMIT WORK.
IF sy-subrc NE 0.
error_code = 'Commit error'.
EXIT.
ENDIF.
ENDIF.
ERROR_C = error_code.Dzed,
I set item information but I'm still getting error.
Actually I didn't understand the difference between applying goods movement over delivery number or po number. What is the difference between them?
If I try to use only deliv_num & deliv_item data, BAPI looks for PO and finds nothing and gives error. But when I use PO number and item for goods movement, this time it is still impossible to be successfull(another error). So I decided to use both delivery number and PO together in BAPI; so I filled those fields:
po_number
po_item
deliv_numb
deliv_item
But as you may guess, no success.
There are also another fields for delivery :
deliv_num_to_search
deliv_item_to_search
I have no idea what are they for.
And also there's another field in BAPI header:
red_doc_no
Maybe I have to use this field to pass delivery number. I'm not sure. I'm confused. -
Outbound IDoc for Goods Movement
HI
We need to generate XML files for goods movement posted in SAP at Goods Receipt (MIGO) and Post Goods Issue (VL02N). Requirement is asynchronous update where the receiving system will poll the xml file at the end of the day.
I have not been able to find any standard outbound idoc for goods movement.Can someone advise how they tackled any similar requirement? Any other approach also appreciated.
Thanks
SriramAnswer to the question, which would be useful to all.
<b>MIGO</b>
MB_CF001 - Customer Function Exit in the Case of Updating a Mat. Doc.
This exit is called on update task, populate segments (edidc & edidd) of WMMBID02 (WMMBXY message type) and use MASTER_IDOC_DISTRIBUTE. Also you need to maintain the ALE Distribution model in WE64 for this message type.
Inside the code you can restrict based on movement type. No need to issue COMMIT.
<b>VL02N</b>
You can use BAdi: LE_SHP_DELIVERY_PROC to perform this.
Create Implementation and use the method SAVE_AND_PUBLISH_DOCUMENT.
Hope this help to others as well. -
Message output for New Purchase Order Document type
Hi experts,
I am having trouble getting a Print message output for a New Purchasing Document type that I created.
Steps that I followed are:
1.Created a new Document type NS via customizing.
2.Assigned the new Purchasing Document Type NS to Output Type NEU which is linked to our customized form for Purchase order display. I used MN04 /NACE to do this step.
Now the message output gets created for my new document type NS but I am unable to display the message.
Notes:
-There are no release stratergies in place for document type NS
-The NEU format works fine the other document type NB which we use for Standard POs.
Are there any steps I have missed? Please help to resolve the issue.
Arosh.Goto NACE select application EF Purchase Order then goto condition record NEU select condition record select the last key combination "Purchasing Output Determination: Document Type"
here enter your doc. type execute
maintain the condition record
NS VN(function) 1 3 EN and click on communication and maintain
Or goto NACR here put EF and NEU and select the last combination "Purchasing Output Determination: Document Type"
maintain ..
NS VN(function) 1 3 EN and click on communication and maintain
Hope it helps.. -
GI:How to set Indicator:Item Not Relevant for Goods Movements LIPS-NOWAB
Hi,
does anybody know what i have to do to get the Indicator: Item Not Relevant for Goods Movements set for a good issue delivey position? (Table LIPS field NOWAB)
thanks in advance
SteffenHi,
the thing is the following (maybe it doesn't work at all, i don't know) :
a) i have a "Non-stock" material (e.g.material type NLAG)
b)this material should be picked, so it should be relevant for the delivery (e.g.item category TAX)
c) for a special reason the "Total goods movement status" in the outbound delivery header shouldn't be "Not relevant", therefore i assigned the item category TAX to a shedule line category that has a movement type (e.g. CN)
d)but the bad thing is, that the customer has set the indicators "quantity updating" and "value updating" for the material type NLAG, and so the goods issue posting gets some errors. eg.g missing storage location etc.)
During debugging i found a coding that checks the sign NOWAB of lips, the documentation says:
"You can use this indicator to control whether the item is relevant for goods movement when the delivery is still being created.
When this indicator is set, goods movement is not posted for this item - regardless of the movement type assigned to it."
So i head the idea it might be possible to set this indication (Lips-nowab) somewhere in the sales order or somewhere else but maybe this conflicts with point c) above .
Maybe shomeone knows what to do or has a better idea.
Best regards
Steffen -
Function Modules for goods movement
Hi Expert,
I need FM Modules for goods movement from one bin to other bin and for Storage location to other storage location.which movement type we have to use for BIN to BIN and Sloc to Sloc.
How to find the stock of a material with respect to bin level.
-RKHello,
Hello have alook at below FM's:-
CALL FUNCTION 'MB_CREATE_GOODS_MOVEMENT'
CALL FUNCTION 'MB_POST_GOODS_MOVEMENT'
Regards,
Nikhil -
GL Account Postings for Goods movement
Hi,
I have a requirement to setup a account determination for goods movement for charity.
What happens is that at times goods are given out directly for charitable purposes.
This is done using a direct goods movement using 562. I need to know what kind of accounts should be debited or credited?
kindly advice.
thanks.Hi,
Generally it should be Goods Issue against Cost Center through Movement Type "201" (Here create "Admin" Cost Center and in Text line mention the purpose as Issue to Charity)
Else create Charitable trust as a vendor and use option Goods Issue --> Others (Mvmt. Type 502) and issue the materials.
Accounting Entry should be;
Stock Account - Cr
Consumption Account - Dr
Also discuss once with your client. -
Why do we configure Record resaon for goods movement?
Hi,
I have seen the settings for "Record reason for goods movement" in customizing for different movement types. it can be optional , suppressed or required.
Can somebody please let me know what is the effect of this setting? what it does at the front end or rather user level, what transaction does it effect?
Thanks
RegardsHi,
We define Record reason for goods movement to input reason for material rejection to vendor or material srapped etc.
By means of displaying the mtl doc anyone get idea why this mtl is rejected.
Regards,
Sandeep -
MIGO not permitted for goods movement
Hello gurus
When I tried doing Goods Issue on an order (movement type 261), an error came up saying that the order was not found or not permitted for goods movement
What would be the cause of this? How can I remedy it?
Thanks in advance, points assuredHi,
This is because the Order may be not released.
Release the order and proceed further.
Regards,
Siva -
Tick for goods movement in production order
Hi,
I have one query with reference to tick for goods movement in production order.
Where it comes from as soon as i released the order.
Is there any customized setting or it is stanadard functionality?
TusharHi,
I am not sure about which tick you are talking. So pls clarify exactly which check boxes you are talking in Production Order.
If you are talking about check boxes of Goods Receipt, GR Non valuated & Delivery Completed check boxes then those are standard SAP functionality which comes automatically at the time of creation / release of the order.
Revert with more details in case your query is not resolved.
Regards,
Tejas -
Partner Profiles for EDI message output settings
HI,
Iam creating Partner profiles settings for Message output through EDI.
While entering data for partner type Li Vendor.
Iam selecting User Type Organizastional Unit.
& while selecting Agent no information found.
Iam getting error as Object type O, ID 50010120 unknown (please observe upper/lower case)
How can i create Id for objects types. ( how can i create Agents)
pls help
Regards
SunilWhat are you trying to do?
Agents in WE20 are used for post processing of failed IDoc's.
You can use:
Work center
Job
Organizational unit
Person
Position
User
If you require agents, which type do you want - organisational unit?
If you do not require post processing options - use User with your ID.
Maybe you are looking for
-
How to add attachments to Webdynpro Application?
Hi All, I have a requirement wherein I need to add supporting documents to a Webdynpro application online. The attachments can be of any type and any number of attachments can be added. If any of you had worked in such a kind of requirement please gi
-
Add "Trailing Nullcolls" to sql loader control files generated by OWB
Hi gurus, I've got a problem loading data with SQL Loader. I need to add the parameter "trailing nullcols" into the SQL Loader control file generated by OWB. I don't want to do this by saving the skript on my hard disk and run it manually, so any ide
-
SAP LSO - Profile matchup -Qualification hyperlink error
Dear Experts, In my profile matchups and Qualification, when I click the highlighted Qualifications , I get an error like "Error COMMUNICATION_FAILURE. Possible cause: error during communication with the back-end system. Try to display the requested
-
I have reset my email password &now when I sign on I receive "yahoo server is not available" message.
-
Keyboard issue: Super-sensitive "z" key all of a sudden...
Just noticed in the last day or two that the "z" key on my q10 has become super sensitive, it is almost impossible to type an "s" on the keyboard without a "z" being added on...in fact, you don't have to fully depress the "z" key to get a z, you just