The Reservation item is not allowed for goods movements

  Hi Experts,
  When i do the goods movements against the reservations in
MIGO, I encounter the below error.
  The reservation
xxxxxxx item xxxx is not allowed for Goods Movement.
  Can you please suggest on this.
  Regards,
  Venkat.

What is the message number ?
Can you please check the goods movement allowed for reservation in MB22 :

Similar Messages

  • GI:How to set Indicator:Item Not Relevant for Goods Movements LIPS-NOWAB

    Hi,
    does anybody know what i have to do to get the Indicator: Item Not Relevant for Goods Movements set for a good issue delivey position? (Table LIPS field NOWAB)
    thanks in advance
    Steffen

    Hi,
    the thing is the following (maybe it doesn't work at all, i don't know) :
    a) i have a "Non-stock" material (e.g.material type NLAG)
    b)this material should be picked, so it should be relevant for the delivery (e.g.item category TAX)
    c) for a special reason the "Total goods movement status" in the outbound delivery header shouldn't be "Not relevant", therefore i assigned the item category TAX to a shedule line category that has a movement type (e.g. CN)
    d)but the bad thing is, that the customer has set the indicators "quantity updating" and "value updating" for the material type NLAG, and so the goods issue posting gets some errors. eg.g missing storage location etc.)
    During debugging i found a coding that checks the sign NOWAB of lips, the documentation says:
    "You can use this indicator to control whether the item is relevant for goods movement when the delivery is still being created.
    When this indicator is set, goods movement is not posted for this item - regardless of the movement type assigned  to it."
    So i head the idea it might be possible to set this indication (Lips-nowab) somewhere in the sales order or somewhere else but maybe this conflicts with point c) above .
    Maybe shomeone knows what to do or has a better idea.
    Best regards
    Steffen

  • The value 1 is not allowed for the field variace key

    Hi experts,
               When i was creating material master i was getting the status message as "the value 1 is not allowed for the field variance key" , but its stopping there its not moving out of that screen and creating the material record. When i see this field in the material master configuration its an optional field. Can you give me suggestions, where it can go wrong.
    Thanks & Regards,
    Ravi.

    Hi
    Can u tell me the field name . I cant get that field ref key. In which view does it come.
    Reg
    Raja

  • Order not found or not permitted for goods movement

    Hi,
    I try to implement Goods Movement by using BAPI_GOODSMVT_CREATE. I try to do it over delivery number. So I use the following code. But somehow it returns "Order not found or not permitted for goods movement" error. I can do the same movement over MIGO transaction. But BAPI can not find the order. Do you have any idea? Do I miss a parameter o something?
    Thanks.
    data: begin of gmhead.
            include structure bapi2017_gm_head_01.
    data: end of gmhead.
    data: begin of gmcode.
            include structure bapi2017_gm_code.
    data: end of gmcode.
    data: begin of mthead.
            include structure bapi2017_gm_head_ret.
    data: end of mthead.
    data: begin of itab occurs 100.
            include structure bapi2017_gm_item_create.
    data: end of itab.
    data: begin of errmsg occurs 10.
            include structure bapiret2.
    data: end of errmsg.
    data: wmenge like iseg-menge,
          error_code(220) type C,
          temp_xchpf like mara-xchpf,
          sbatch like mseg-charg.
    DATA : temp_vbeln LIKE likp-vbeln.
    gmhead-pstng_date = sy-datum.
    gmhead-doc_date   = sy-datum.
    gmhead-pr_uname   = 'sy-uname.
    gmhead-VER_GR_GI_SLIP = '1'.
    gmhead-VER_GR_GI_SLIPX = 'X'.
    gmcode-gm_code  = '01'.        " for 101
    itab-mvt_ind    = 'F'.  
    itab-plant      = '0001'.
    itab-entry_qnt  = AMOUNT.
    itab-move_type  = '101'.
    itab-item_text  = 'invoice'.
    itab-deliv_numb = temp_vbeln.
    APPEND itab.
    CALL FUNCTION 'BAPI_GOODSMVT_CREATE'
      EXPORTING
        goodsmvt_header             = gmhead
        goodsmvt_code               = gmcode
        goodsmvt_headret            = mthead
      TABLES
        goodsmvt_item               = itab
        return                      = errmsg.
    CLEAR error_code.
    LOOP AT errmsg.
      IF errmsg-type EQ 'E'.
         error_code = errmsg-message.
      ENDIF.
    ENDLOOP.
    IF error_code IS INITIAL.
      COMMIT WORK.
      IF sy-subrc NE 0.
        error_code = 'Commit error'.
        EXIT.
      ENDIF.
    ENDIF.
    ERROR_C = error_code.

    Dzed,
    I set item information but I'm still getting error.
    Actually I didn't understand the difference between applying goods movement over delivery number or po number. What is the difference between them?
    If I try to use only deliv_num & deliv_item data, BAPI looks for PO and finds nothing and gives error. But when I use PO number and item for goods movement, this time it is still impossible to be successfull(another error). So I decided to use both delivery number and PO together in BAPI; so I filled those fields:
    po_number
    po_item
    deliv_numb
    deliv_item
    But as you may guess, no success.
    There are also another fields for delivery :
    deliv_num_to_search
    deliv_item_to_search
    I have no idea what are they for.
    And also there's another field in BAPI header:
    red_doc_no
    Maybe I have to use this field to pass delivery number. I'm not sure. I'm confused.

  • MIGO not permitted for goods movement

    Hello gurus
    When I tried doing Goods Issue on an order (movement type 261), an error came up saying that the order was not found or not permitted for goods movement
    What would be the cause of this? How can I remedy it?
    Thanks in advance, points assured

    Hi,
    This is because the Order may be not released.
    Release the order and proceed further.
    Regards,
    Siva

  • Line item does not exists for Good issue

    Dear All,
    User have created a outbound delivery and perform Post good issue.No billing document has been created yet. Somehow lineitem does not exists in the delivery document however Material Document for Good issue exists with reference to Delivery Document. I tried to reverse the delivery document with reference . No error was occured but still no reversal was updated on Delivery document. I know it is not possible to delete line item without reversal of PGI but system is showing me the status as described
    Prompt response in this regard is highly appreciable
    Thank you,
    Nomi

    Solution has been identified, If goods has been issued then Returns Process wrt Sales Order  solved the problem for my rare process. Goods have been transfered to unristricted stock.
    Thank you all for your support
    Best Regards,
    NoMi

  • VL01N - indicator: Item not relevant for goods movements

    Hello Everyone
    When creating a new delivery, into the administration tab of the Item detail, there is an indicator:
    "No goods movement" into the control data box.
    Based on SAP help:
    When this indicator is set, goods movement is not posted for this item - regardless of the movement type assigned  to it.
    My problem is: that field is not selectable(It is in grey). So we cannot change it. How can we set that field?
    Regards
    stjacqd

    Dear Dstj,
    Check the movement type before that No Goods Movement check box it should be 601 for outbound delivery.Due to wrong movement type check box get activated.
    If you are allow to chenge that movement type then change and try.
    If movement type is incorrect then take help of MM consultant to set the movement types properly.
    I hope this will help you,
    Regards,
    Murali.
    Edited by: Murali Mohan.Tallapaneni on Nov 15, 2008 6:52 AM

  • Quiz Will Not Allow for Backward Movement

    I have a short 10 page presentation, on page 5 I have a single question.  It is optional, I have it marked for backward movement, it does not show a score afterwards.  When I publish, I can work my way through all pages, however, when I go backwards, I get stuck at the quiz screen, it will not allow me to go back to pages prior to the quiz.  Any suggestions?

    Hi kirkisbetter,
    As per my understanding , you are facing the following 2 issues :
    Issue 1 : You are not able to see the score (Result Slide)at the end
    Issue 2 : Backward movement from the quiz slide.
    We would like to suugest you to follow the steps as mentioned below to resolve the above issues :
    Suggestion for Issue 1:
    Once you delete the result slide from the presentation, then for the result slide to reappear , please go to Quiz -> Manage -> Select the Quiz. The Quiz Settings dialog appears. Make sure the "Show Score at the end of the quiz" option is enabled and then click on OK.
    You can now see the result slide in your presentation.
    Suggestion for Issue 2:
    Once you come to the Quiz slide then you come to the quiz pane in place of the outline pane. In the quiz pane , you can see slides which are presnet after the question slide.
    In order to go backwards from question slide, you need to use the backward button available in the playbar or use the Thumb tab in the right side panel. Once you browse to one slide before the question slide,then you can again see the Outline tab in your right slide pane which lists all the slides available in the presenation.
    We hope this resolves the issue.
    If you are still facing the problem then please do let us know with the exact steps and if possible please share the project file which causes this issue.
    Thanks,
    Subhransu
    Adobe Captivate and Preseneter Team

  • The sales unit is not allowed+STO plant to plant

    Dear Friends,
    In plant to plant stock transfer,while creating delivery in VL04,system is giving the following message-
    'The sales unit is not allowed for the  material in item 000010'
    I have not assigned any sales unit to the material still it is giving this error.
    Please advice

    Have a look at the following note:-
    Note 140551 - VL384 Stock transport order and batch selection
    G. Lakshmipathi

  • Executing the SQL statement is not allowed - Error

    I am getting "Executing the SQL statement is not allowed" for an INSERT cfquery that I'm running.  I checked the usual suspects:
    - DSN allows INSERT
    - I've seen reports online where certain field names or values are considered key words, so for protection CF blocks the query in this way (it would be nice if there was a different error message when it gets blocked this way vs. the DSN doesn't allow INSERT error message).  The field names and values were all benign strings, so it didn't seem like that.
    I took the same string for the query and ran it on another page and it ran fine (same DSN, too).

    SOLVED: I decided to enter this in here, just to get it into web searches for others since I couldn't find anything.
    - I was calling a function for one of the values in the query:  get_db_status_code("initialize")  Apparently CF parses the query to see if it's allowed BEFORE it runs the CFML in it, so something in that function name, or the parameter "initialize" was a key word that CF doesn't allow.  I moved the function call outside of the query and loaded a temp variable for use in the query and it then worked.

  • Default quantity of confirmation(co11) should allowed in goods movements mb

    thank you for giving valuable reply.
    i have another question
    after confirming 10 pcs. partially of the order quantity say 50 pcs.(through co11)
    i have to cary out the goods movement mb31 (101) for 10 pcs.
    now, i put qtys. more than 10 pcs. & up to the 50 pcs the system will allowed
    for the goods movements.
    but i want restriction that the 10 pcs. confirmed qtys. only allowed for goods movement.
    please tell me the solution for the same.i have not defined auto G.R. in control key & in production scheduling profile.please give alternative for these.
    thanks
    regards
    mangesh

    Gowri,
    Code for your copy pasting in the source code of ZXMBCU02.
    Remember to activate the program. In SMOD enter the enhancement, press F8 and then click on activate button.
    *&  Include           ZXMBCU02
    data it_afvv like afvv occurs 0 with header line.
    tables: afvv, afko, afpo.
    data tot_gr like mseg-menge.
    If i_mseg-bwart = '101' and i_mseg-aufnr is not initial.
      select single * from afko where aufnr = i_mseg-aufnr.
      select * from afvv into table it_afvv where aufpl = afko-aufnr.
      sort it_afvv by aplzl descending.
      read table it_afvv index 1.
      select single lmnga from afvv into afvv-lmnga where aufpl = afko-aufnr
    and aplzl = it_afvv-aplzl.
      select single * from afpo where aufnr = i_mseg-aufnr.
      tot_gr = afpo-wemng + i_mseg-menge.
      if tot_gr > afvv-lmnga.
        MESSAGE 'GR qty greater than Confqty of the last opern' TYPE 'E'.
      Endif.
    endif.

  • Selection Tool not allowing me to move shapes

    I need your help.
    The Selection Tool is not allowing me to move shapes.  It allows me to Resize them by the achor points, but won't let me move them.
    Any suggestions?
    I use Adobe Illustrator CS5 for Mac OSX.
    Thanks!

    Try nudging with the up/down arrow keys. Does that work? Does a Move command (Cmd+Shift+M) work?
    If so, could it be that Object Selection by Path Only is checked in Selection & Anchor Display prefs? If so, uncheck it.

  • The value  is not allowed for the field Cross-plant CM

    Hello All
    When i copy material in refernce to existin gone. I am getting this message
    "The value  is not allowed for the field Cross-plant CM"
    I am not putting any thing in this Basic-view Cross-plant CM, but still getting this message.
    Any help will be good...Thanks in advance...

    Hi,
    Please check the check box in front of the field config material is checked?
    If so then this material is configurable material
    A material that can have different variants.
    For example, a car can have different paint, trim, and engines.
    Configurable materials have a super bill of material (BOM) that contains all the components for producing every variant of the material. Similarly, they have a super task list that contains all the operations. When a material is configured, only the components and operations needed for a variant are selected.
    Please check
    BR
    Diwakar

  • Err in PO creation-Sales document item is not defined for the transaction

    Hi,
    I am getting the following error while creating PO
    "Sales document item 30000183 000100 is not defined for the transaction
    Message no. V1 198
    Diagnosis
    You have tried to carry out a business transaction for this sales and distribution document item which, for this item, is not allowed.
    This may be due to the fact that this item is not part of a make-to-order production with cost management in the sales order."
    I have used an item category which is copy of TAB and the sales order line item is attached to WBS element.
    can any one guide me what needs to be done.
    thanks

    If you want the sales order creation to initiate a PO creation automatically, check if the "Create PO Automatically" button is ticked on for the item category in Transaction flow tab in tcode VOV7
    This will solve your problem, provided your configuration for PO on the MM side is fine.
    Reward if this helps.

  • Error in RFx : Item type 'Service' not allowed for this Item

    hi , experts,
      We use SRM7.0 in Standalone scenario .
      i get an error when i transfer SC to RFx :     Line 0001: Item type 'Service' not allowed for this Item .
    if someone kindly tell me how to correct this Error.
      another question is ,in the Standalone scenario , can we create Service Master with multiple level(hierarchy) use Tcode 'COMMPR01 ' ?
       reagrds
               claud

    Hi Claud,
    SRM does not support hierarchy in service for operational documents like PO, contract, confirmation and invoice in SRM 7. It does support hierarchy in service only for RFx doucments. You need to activate the hierarchy template for SRM for that.
    Thanks and regards,
    Ranjan

Maybe you are looking for