EDI Message type issue

Dear Friends,
In my current project my issue is related to EDI Message type the problem is as below
If I use output type (message type) NEU which is SAP standard and if I select this out put type (NEU) with medium EDI after saving this I can see all the data segments in Outbound Idoc.
Now the actual issue is if I use the ZNET customize output type which is the extension of NEU with medium type EDI after saving this if I check the Idoc (We02) I am not able to see few purchase orders data segments like E1EDKT1(Header Text ) and E1EDPt1(Item Text)
What could be the reasons? Is there any setting where output types and data segments are linked
Your help will be highly appreciated
With Best Regards,
Ashish Vats

Hi,
Thanks for your reply.
I have maintained all the parameters in partner profile.... I think Could not explained the issue in detail.
the issue is as below
When I select the output type ZNET in purchase order and medium EDI(Partner profile for Vendor maintained for outbound PO) after saving the same when I check the outbound IDOC generated by system in that some segments are not coming while in NEU output type all the segments are coming properly.
ZNET is the Extension of NEU .. now my question is to forum where output types are linked with segments ?so that I can compare the ZNET with NEU and findout the missing segments or could link the missing segments with ZNET
Hope I could explained you...........
Regards,
Ashish

Similar Messages

EDI Message Type for Credit Memo inbound message

Hi Experts ,
We have ECC6.04.
We configured Incoming vendor invoice idoc ( Message Type - INVOIC, Basic type - INVOIC02) which is working fine. We also have Credir Memo incoming message ( Message Type - GSVERF , Basic type - GSVERF03 , Processing code- GSVE , FM-IDOC_INPUT_GSVERF_START and assigned this FM to Object Type- BUS2094)
I am using same IdoC in WE19 that of Invoice, which successfully posted and editing the BSART as CRME and entering the Messgae type GSVERF , but when I am posting it system is giving error
No record exists in T661W for vendor 2000001 , plant , unloading pointMessage no. V4032
Diagnosis
The system could not determine a sold-to party as no record has been specified in Table T661W for the displayed supplier, plant, and unloading point values.
System Response
IDOCS processing is terminated.
Procedure
Please create a record in Table T661W for the above values and restart the IDOCS planning from electronic mail.
and
EDI: Syntax error in IDoc (segment cannot be identified)Message no. E0078
Diagnosis
The segment E1EDK04 does not occur at the current level of the basic type GSVERF03 (extension ).
This error can have several reasons:
The segment E1EDK04 is assigned to a group whose header segment does not occur.
The segment E1EDK04 does not exist in the syntax description of the basic type GSVERF03 (extension ).
The sequence of segments in the group in which the segment appears is incorrect.
Previous errors ('mandatory' segment or group missing) may be due to this error.
Procedure
Please check the IDoc or the syntax description of the basic type GSVERF03 (extension ).
Th table T661W is for Vendor, partner decribtion, Sold to party, Unlaoding Point. So I am not getting whsy sold to part relevant table ssytem is asking to make entry ?
Can anyone please suggest/help me what is the problem and solution on this ?
Thanks
NAP

Hi ,
Currently we are using Message Type - GSVERF , Basic type - GSVERF03 , Processing code- GSVE , FM-IDOC_INPUT_GSVERF_START and assigned this FM to Object Type- BUS2094)..which is giving above error. I just found that process code GSVE is for Outbound message
Can any one suggest / confirm what should be exact Message Type , Basis Type, Process code and Funct. Module requiered for processing EDI inbound message in MM - Logistics Inv Varification ?
Thanks
NAP

Calc manager: @RETURN function with WARNING as message type issue

Hi Gurus,
I m working in version 11.1.2.2 in IE 9. I have created a simple calculation script as below to test the @Return essbase function.
function
FIX ( .....)
"502100"(
IF( ("YearTotal" > 50000))
@RETURN("True:test message" , WARNING);
ELSE
@RETURN("False:test message" , WARNING);
ENDIF
This script validates fine , however when executed on Save of Data Form gives a Job console error with no error code but message as below
Invalid network data. Type is matched but length is zero. An application protocol error might exist between server and client processes..
The same script executed using error message type as *"ERROR"* executes successfuly on save of data form and gives exepected custom error message.
I read a thread in forum saying the @Return function works only with ERROR as message type for vesrion 11.1.2.1
How to use Essbase @RETURN function to displayed messages in 11.1.2.1
I have tried using WARNING and INFO , both doesnt seem to work even in 11.1.2.2, Only ERROR as message type works.
Has anyone experienced the same with version 11.1.2.2 as well? Is this still a bug?
Please let me know your inputs.
Thanks
SN

Hi,
I am sorry for the late response!
Thank you for all your suggestions!
I had used in the followng way and it resolved my issue.
SELECT GUID_PRGEN "Primary Key as GUID in "RAW" Format
         GUID_PR     "Primary Key as GUID in "RAW" Format
         ATTR20A     "SUBSTANCE ID
         ATTR05A     "Materail Type
         ATTR10A     "Materail Group
         ATTR05B     "Sub-Family
         FROM /SAPSLL/PRGEN
         INTO TABLE T_PRGEN
         WHERE ATTR20A IN S_AT20A.
IF T_PRGEN IS INITIAL.
    MESSAGE : I007(ZMSSG) WITH 'Data not available for this entry'.
    STOP.
ENDIF.
Regards,
Kittu

EDI Message type

Hello guru's
I am configuring the edi setup for billing documents.
Just a quick question, I need to set it up for idoc type INVOIC01 so which message type should I use for the same DEBMAS?
Please suggest.
Thanks
Aman

Rags, I will check them again but getting two errors as below mentioned.
**"This output has not been defined for medium 6 and partner function LS"** this is at condition record level vv31.
Maintain outgoing EDI-connection data for partner IWAYLOG " this is at the output level for billing document,
Thanks
aman

ZHRMD_A Custome message type issue with custom segments.

Hi Experts,
We have implemented ALE in HR system, we have all other ALE using HRMD_A and we have jobs scheduled for HRMD_A message type. We dont want this job should trigger our model and distribute the data. So we have reduced the HRMD_A messae type to ZHRMD_A for basic type HRMD_A06. Every thing fine. After upgrade of SAP FROM ECC6.O to EHP4, PFAL is not creating IDOC segements for custom segments Z*. for example Z1P0002....ETC, though there is personal data for PERNR.
Please guid if you have come across such situation and solution.
Thanks & Regards.
Venkat.

Hi Venkat,
In the same way i too have one situation like...have different model view with same message types( and same extension type) for various countries from one sender system.
Should i create reduced message type for each model view?
Or can i use same message type HRMD_A for various model views?
If i can use same message type and same extension type for various model views is there any restriction we need to write in USER EXIT EXIT_SAPLRHA0_004?
Regards,
Lava.

Edi message types

can anyone tell me the difference between whsord and shpord message types...with delvry03 ?
thanks
larry

Use the foll. msg types if it is
Delivery: Dispatch order -- SHPORD
Delivery: Stock order -- WHSORD
in this case idoc type is same for both i.e DELVRY03

MAHN message type issue

Hi
I am not able to see all the items in the print output MAHN in the PO. What could be the reason?
Thanks
Prashanth

Hi
Any info on this.
Thanks
Prashanth

In which table cound i find the info on EDI standard Message type??

Example
EDI standard Message type Business process
EDIFACT ORDERS Purchase order
INVOIC Invoice
ANSI X12 850 Purchase order
810 Invoice
Like those 850..810..etc info, i dont know from which table could i find the related info?
Thanks.

Hi Hoo,
Electronic Data Interchange (or EDI) refers to the use of computers in formatting and exchanging business information using internationally recognized standards and formats. Standards organizations throughout the world have defined hundreds of document types to create a universal language for companies to conduct business while using dissimilar systems and processes. Common business documents, such as the invoice, purchase order, production planning schedule, ship manifest, and customs declaration, have been standardized and are sent and received electronically over private secure networks (Value-Added Networks - VANs) and the Internet.
So EDI is not an SAP product, It is a method to exchange the data over internet.
You dont get any information in any table in SAP. SAP supports EDI to exchange the data over internet. There are no. of third party EDI tools to connect to SAP.
following is link to know more about EDI message types.
http://www.edifactory.de/messages.php?s=D96A

How to control the status of EDI message in delivery document

Hello:
We use user exit:EXIT_SAPLV56K_001 in function:IDOC_OUTPUT_Delivery to block the IDOC generation if delivery is blocked in GTS system.The IDOC generation can be blocked successfully by this user exit but the EDI message type will still have the status of "successfully processed" in the delivery doucment after IDOC generation is prevented.So user have to manually repeat the EDI Message type so that this EDI message type can be retriggerred by the background job of RSNAST00.
I am wondering if the EDI message in the delivery document can have the status of "not processed" even after IDOC generation is prevented.
BR
Thanks

Did you raise any exception like ERROR_MESSAGE_RECEIVED from the exit when the delivery is blocked?
The most important is the RSNASTED should get some exception to set RC = 4 (Non-zero). Only in that case, the EDI message type will go to error (i.e. VSTAT = 2) otherwise, by-default the RC = 0 unless we lead it to set to non-zero. Unless u make VSTAT = 2, you can't process it thru' RSNAST00 or better RSNAST0F for reprocessing the messages that go to error.

Incorrect message type in IDOC for Purchase order change

Hi Gurus.
Please advise on below.
We have several purchase orders that are configured to trigger IDOC upon change. But accidentally, someone has deactiveted the automatic proposal of EDI message type for these Purchase orders which resulted to not transmitting purchase order change documents automatically.
As a workaround, we have proposed to create EDI message manually during Purchase order change. But upon checking in tcode WE09, message type is ORDERS which is PO create instead if ORDCHG for purchase order change.
Please kindly advice on why it is behaving like this for purchase orders with EDI message previously deactivated.
Thanks in advance.
Acel.
To simulate.
Create PO. go to messages, select EDI message then deactivate permanently. Save PO. Release PO if needed. Change PO. go to messages, EDI is not automatically proposed. create EDI message mamanually. Save PO. Release PO id needed. check tcode WE09, for PO create, no IDOC since it was deactivated permanently. For PO change, IDOC was triggered but with incorrect message type ORDERS instead of ORDCHG.

Hi Acel,
You will need to check the settings in transaction WE20 - You will be using a Partner Profile to determine the outbound message, either for each vendor or a generic one.
on the outbound parameters, you will need to ensure that ORDCHG is set up as a message type. If not, add it, ensuring that you use the message ORDCHG, the basic type (or extension) that you are using, usually ORDERS05 and make sure that in message control, you have process code ME02 set up. This should enable the correct message type to be determined.
Regards,
Rob

Edi message

How and where to create this EDI message type.
Field name : edidc-stdmes EDI message type

Hi,
Create Message Type --> WE81
Regards
Sudheer

SHPCON message type

I am trying to simulate inbound 945 using the EDI message type "SHPCON" using WE19. While it is successful in updating the pick quantities, the overall Warehouse status is still showing as "B" (as a result of which I am not able to do PGI). How can I bring the overall warehouse status to "C"? Am I missing something? Thanks in advance

You cannot pick and PGI with one IDoc because there is only one qualifier field. You will need 2 IDocs: one to pick and one for PGI.

IDOC message type and message code and function?

Hai...
anyone can explain with example what is IDOC message type and message code and function? how it is used?
regards,
prabakaran

Hi
An IDoc type can be implemented for various "logical" messages; one message can also be assigned to different IDoc types (m:n relationship).
The message is defined by the values for message type (required), message code (optional) and message function (optional). These three fields belong to the key fields in the partner profiles, which are used, for example, to determine inbound processing. If the 'Message type' field is not maintained (e.g. in the case of a control record from Release 2.1, in which MESTYP did not exist), the IDoc Interface uses the value from STDMES (EDI message type).
If possible, the descriptions of the message type should be linked to the corresponding EDI message type.
The message ORDERS (= message type) identifies purchase orders (outbound) and sales orders (inbound).
Message code or Process Code for Inbound Processing
Code which identifies a process type.
The process type determines which process is used to convert an IDoc to an SAP document.
Process code for outbound processing
Code which identifies the type of data which is to be sent via the IDoc interface.
Using the process code, the IDoc interface finds the application selection module which converts the SAP document into an IDoc.
The process code is only used with applications which perform outbound processing via Message Control (NAST).
Thanks & Regards
Kishore

Purchase Order Outbound Idoc issue. Message Type ORDER

Hi Experts,
I am having issue with outbound IDoc generated from Purchase Order.(Message Type ORDER and Basic Type ORDERS05)
Issue is when i create PO idoc Segment E1EDP01 and field ACTION populates as 001 this works fine.
Now when made any changes to the purchase order.* PO trigers one more EDI - Idoc. but the ACTION field is stil as 002.*
Could any tell me how to fix this.
Cheers...Gopinath.

Hi,
Thank you.
I have found the issue and fixed.
Below three setting was missing same has been done in Partner Profile now ok.
Message type u2013 ORDCHG, Processing Code u2013 ME11 and Change flag On.
Cheers..Gopinath
Edited by: Gopinath A.R on Oct 8, 2009 3:14 PM

Message type EDI is not triggering for outbound deliveries

Hello,
When ever the shipment status is completed message type EDI is triggered for the outbound delivery.
However, in spite of the shipment completion the DESADV EDI message is not created in the outbound delivery.
So, i request you to help me in this issue.
Regards,
Anil

Hi,
1st please check the partner porfile for whom it is sent ( Eg -- Ship to party) using T.code WE20 in partner type ku, look for the customer for whom it is sent.
Check for the message type wheter it is add in outbound parameteres.
Finally check the varaint of shipment whether the required output is maintained in the shipment varaint and also make sure that condition record is maintained for the output.
You find some solution with this.
Regards
vk

EDI Message type issue

Similar Messages

Maybe you are looking for