EDI Transmission Issue!! Interface issue

Dear Experts,
I've been trying to connect with Client system for a couple of weeks now to debug and iron-out a possible issue we uncovered in our parallel EDI transmissions from our SAP system back on April 29th and 30th. The EDI Transmission is not happening. We're not able to establish the interface with the Warehouse Managment System. Please suggest some solutions.
Thanks in advance.

Hi,
  What systems are you trying to connect. ECC with SAP WMS(Decentral)?.....In this case you will have to look at the Distribution model between the systems. Are you using any Middleware?
Thanks
Vinod.

Similar Messages

  • Transmission web interface does not load until I restart daemon

    I'm prefer using the transmission web interface to manage my torrents, when I run the daemon and connect to kiwi:9091, it works fine (kiwi=localhost). However when I restart and try to connect to the web interface I am unable to connect.
    Google Chrome reports:
    Oops! Google Chrome could not connect to kiwi:9091
    and Firefox says:
    Unable to connect
    Firefox can't establish a connection to the server at kiwi:9091.
    Even though I've enabled the transmission service:
    # systemctrl enable transmission.service
    and the service is running after a fresh boot:
    $ systemctl status transmission.service
    transmission.service - Transmission Bit Torrent Daemon
    Loaded: loaded (/usr/lib/systemd/system/transmission.service; enabled)
    Active: active (running) since Wed 2013-03-06 12:10:05 GMT
    Process: 398 ExecStart=/usr/bin/transmission-daemon --pid-file /run/transmission/transmission.pid (code=exited, status=0/SUCCESS)
    Main PID: 444 (transmission-da)
    CGroup: name=systemd:/system/transmission.service
    └─444 /usr/bin/transmission-daemon --pid-file /run/transmission/transmission.pid
    When I restart the service, the web interface works fine.
    # systemctl restart transmission.service
    # systemctl status transmission.service
    transmission.service - Transmission Bit Torrent Daemon
    Loaded: loaded (/usr/lib/systemd/system/transmission.service; enabled)
    Active: active (running) since Wed 2013-03-06 11:20:48 GMT; 35s ago
    Process: 1313 ExecStart=/usr/bin/transmission-daemon --pid-file /run/transmission/transmission.pid (code=exited, status=0/SUCCESS)
    Main PID: 1314 (transmission-da)
    CGroup: name=systemd:/system/transmission.service
    └─1314 /usr/bin/transmission-daemon --pid-file /run/transmission/transmission.pid
    Mar 06 11:20:49 kiwi transmission-daemon[1314]: Loaded 2 torrents (session.c:1943)
    Mar 06 11:20:49 kiwi transmission-daemon[1314]: Port Forwarding (NAT-PMP) initnatpmp succeeded (0) (natpmp.c:72)
    Mar 06 11:20:49 kiwi transmission-daemon[1314]: Port Forwarding (NAT-PMP) sendpublicaddressrequest succeeded (2) (natpmp.c:72)
    Mar 06 11:20:51 kiwi transmission-daemon[1314]: Port Forwarding (UPnP) Found Internet Gateway Device "http://192.168.1.254:8000/jd877ogd4w2/IG...p.c:200)
    Mar 06 11:20:51 kiwi transmission-daemon[1314]: Port Forwarding (UPnP) Local Address is "192.168.1.79" (upnp.c:202)
    Mar 06 11:20:53 kiwi transmission-daemon[1314]: Port Forwarding (UPnP) Port forwarding through "http://192.168.1.254:8000/jd877ogd4w2/IGD/upnp...p.c:277)
    Mar 06 11:20:53 kiwi transmission-daemon[1314]: Port Forwarding (UPnP) Port forwarding successful! (upnp.c:280)
    Mar 06 11:20:53 kiwi transmission-daemon[1314]: Port Forwarding State changed from "Not forwarded" to "Forwarded" (port-forwarding.c:93)
    wat?

    I too had the same problem as you. And then I found this:
    https://bugs.archlinux.org/task/31478

  • EDI batching issue while handling the exception.

    I am trying to batch the inbound IDOC message coming throught external release as the requirement is to batch the EDI messages
    for every IDOC having multiple BGM's. For eg if the 1st IDOC has 4 BGM's and second Idoc has 3 BGM's there should be 2 different batches
    of EDI each for 1 idoc.
    Achived this using external release trigger and delay mechanism, however if suppose the 1st Idoc fails to process in the 3rd message due to mapping
    issue then the previous 2 BGM's and already sent to the messagebox and subscribed by the batching orchestration. And when the second message is arriving
    with suppose 3 BGM's, the 2 BGM's are getting batched with them..
    For eg : 1st IDOC -  4 BGM repeating record -- 3rd is failed in orchestration looping but previous 2 are already sent to messagebox and subscribed by batching orchestration
    2nd IDOC -  with 3 BGM are processed successfully and then releasing an external trigger making the previous 2 also to get batched with the 2nd IDOC.
    My requirement is if there is any mapping issue then the previous BGM's which are sent should not get batched by the batching orchestration.
    Could anyone please suggest on the same?

    If third message fails, what do you want to do with previous messages? I think your batching orchestration should deal with incomplete batch after a period of time. You anyways won't be able to retrieve idoc second time.
    Secondly, It looks like you want to build create atomatic type of solution, for this you need to have one buffering place where you keep all successfully mapped messages intermediately. Again you need control message mechanism to notify batch complete etc.
     (Perhaps you need to explore more on batching orchestration itself).
    Another thing, if sap doesn't send single batch into multiple idocs, then you can probably create an orchestration to create whole batch and send control message to trigger edi batching.
    If this answers your question please mark it as Answer and if this post is helpful, please vote as helpful. Thanks !

  • EDI purchasing issue

    Problem solving reports for EDI Purchasing are not working...how do i solve this issue...someone post me step step process to resolve the issue ..Thanks

    Hi Bob,
    Its not clear what is your current issue with IDOCs, but here some tips.
    If you have idocs that are not being processed, you should first check your partner profiles
    WE20, check the inbound and outbound parameters in each system. There you define processing routine for inbound.
    For status check you may use WE02, and get status code and if there is any, the error code and message.
    A good tool is to use the context menu (from initial screen, go to transaction WEDI, cannot be called from other transaction using /N) There you will find the transactions for administration, and also test tools. These test tools are very helpful to follow inbound/outbound processing function modules.
    You will find documentation, and inbound and outbound process codes. These process codes are those you define with your message type in transaction WE20.
    Be aware that standard function modules (inbound/outbound) may include user exits allowing you to perform additional checks/conversion (i.e. if you are receiving idocs from a legacy system and your plants are defined with a different naming convention, you may include a cross reference routine to change values in segment fields)
    In have to identify also the action code you need to inform in the corresponding segments.
    It's very difficult to give you a direct answer, without knowing the error message you are having. If you give us more information about your issue/scenario, you will probably get better solutions.

  • Airport transmission issues

    Recently both my aiport express and airport extreme seem to have stopped broadcasting. It might be due to age - they're both over 10 years old - anyone know the life expectancy of wireless routers? The airport express diagnostic lights indicate no problem, while the airport extreme starts up fine, but then the transmit light refuses to light. I've tried factory resets on both devices, no luck.
    The reason I'm uncertain about them being ready to kick the motherboard is because when I try to run Internet Connect, it crashes with the error report "Internet Connect quit unexpectedly". I had also noticed that before my airport express went radio silent, I couldn't join my network manually, even though I spelled the name of the network correctly and entered the correct password: only the iMac could join automatically when I started it up.
    So, any solutions to getting a functioning version of Internet Connect for OS 10.6.8, and is there any other way of testing whether a router is needing a new AE-35 unit?

    Reception/interference issues have nothing to do with the operating system, so saying Windows clients don't experience reception/interference issues doesn't help narrow things down.
    If for some reason the DHCPACKs aren't getting back to the clients, you'll see continued requests.
    What IP address, if any, do the Macs hold while they cannot ping local hosts? The address they're requesting? A self-assigned IP address? A former IP address on the same subnet?
    While it's not your particular issue, you may also want to read this article:
    http://www.net.princeton.edu/multi-dhcp-one-interface.html

  • Biztalk message transmission issue

    Microsoft.ServiceModel.Channels.Common.ConnectionException: Details: ErrorCode=RFC_OK. ErrorGroup=RFC_ERROR_LOGON_FAILURE. SapErrorMessage=Timeout.  AdapterErrorMessage=. ---> Microsoft.Adapters.SAP.RFCException: Details: ErrorCode=RFC_OK. ErrorGroup=RFC_ERROR_LOGON_FAILURE.
    SapErrorMessage=Timeout.  AdapterErrorMessage=.
       at Microsoft.Adapters.SAP.RfcClientConnection.Open()
       at Microsoft.Adapters.SAP.SAPConnection.Open(TimeSpan timeout)
       --- End of inner exception stack trace ---
    Server stack trace:
       at System.ServiceModel.AsyncResult.End[TAsyncResult](IAsyncResult result)
       at System.ServiceModel.Channels.ServiceChannel.SendAsyncResult.End(SendAsyncResult result)
       at System.ServiceModel.Channels.ServiceChannel.EndCall(String action, Object[] outs, IAsyncResult result)
       at System.ServiceModel.Channels.ServiceChannel.EndRequest(IAsyncResult result)
    Exception rethrown at [0]:
       at System.Runtime.Remoting.Proxies.RealProxy.HandleReturnMessage(IMessage reqMsg, IMessage retMsg)
       a
    TVS Apache
    what is the root cause..plz help me any one plz

    It is basically connection issue. Not able to connect target system that is why timeout error
    Microsoft.Adapters.SAP.SAPConnection.Open(TimeSpan timeout)..
    Can you check here
    1) All related services are up/running fine or not? .. like..Proxies.RealProxy 
    2) Permission : Configured credential have access to target system.
    3) If possible also check the target system error logs.
    Regards
    Suman

  • Automatic e-mail transmission issue

    Hai Gurus,
    Please hep me out with this issue.
    We have SCOT configured in our Quality system and the background job SAPCONNECT_INT_SEND is scheduled in a client, for ex say 100. Now we got a requirement that e-mails should not be sent automatically and should be pushed only selectively through SOST in another client, for ex say 700, in the same system. The job SAPCONNECT_INT_SEND is scheduled only in client 100 and not in 700. So, it should not push e-mails from client 700 as it is not scheduled there right?. But, on contrary on this, we are observing e-mails are being pushed automatically in client 700 also. How is this possible, when job is scheduled to run in 100 and not in 700, how it pushes mail from 700. I dont think this job SAPCONNECT_INT_SEND is client independent?
    Please let me know your thoughts on it and help me out.
    Regards,
    R.K.

    HI,
    Just for more clarity:
    1.Job SAPCONNECT_INT_SEND(Check from SOST)  is scheduled in client 100 and SMTP is activated(node in use) only in client 100.
    2.Job SAPCONNECT_INT_SEND(Check from SOST)  is not scheduled in cleint 700 and SMTP(from SCOT) is not active in client 700.
    You problem is mails are being pushed from client 700,even though job is not scheduled from this client.
    Try this option:
    Disable job SAPCONNECT_INT_SEND in both client as you want selective mails to be sent and then use "Repeat send" option from SOST.
    Refer:http://wiki.sdn.sap.com/wiki/display/ABAP/SendingMails-HomePage
    Mails are not sent
    Either use SOST transaction to send them manually, or from program: submit rsconn01 with mode = 'INT' with output = ' ' and return.
    It may be best to schedule a job with program RSCONN02 every 10 minutes when SAP system produces many mails.
    Regards,
    Ashutosh

  • EDI : ME22 Issue

    Hi experts,                                                                               
    When I change the PO in ME22 it is adding an error message to my PO Messages like 'No IDoc items belonging to purchasing document found ' .Path is Header--> Messages.
    Can anyone tel me what may be the issue?
    Thanks

    Hi Bob,
    Its not clear what is your current issue with IDOCs, but here some tips.
    If you have idocs that are not being processed, you should first check your partner profiles
    WE20, check the inbound and outbound parameters in each system. There you define processing routine for inbound.
    For status check you may use WE02, and get status code and if there is any, the error code and message.
    A good tool is to use the context menu (from initial screen, go to transaction WEDI, cannot be called from other transaction using /N) There you will find the transactions for administration, and also test tools. These test tools are very helpful to follow inbound/outbound processing function modules.
    You will find documentation, and inbound and outbound process codes. These process codes are those you define with your message type in transaction WE20.
    Be aware that standard function modules (inbound/outbound) may include user exits allowing you to perform additional checks/conversion (i.e. if you are receiving idocs from a legacy system and your plants are defined with a different naming convention, you may include a cross reference routine to change values in segment fields)
    In have to identify also the action code you need to inform in the corresponding segments.
    It's very difficult to give you a direct answer, without knowing the error message you are having. If you give us more information about your issue/scenario, you will probably get better solutions.

  • EDI Seperator Issue for INbound EDI Scenario

    Hi Experts,
    Am using latest service pack and SP12 and patch 5 it seems.
    Still am getting same error.
    Message could not be forwarded to the JCA adapter. Reason: com.sap.aii.adapter.ediseparator.ra.integration.DispatchException: Message cannot be dispatched: Message cannot be dispatched: senderChannel 'fbesfd4b25331eabe67a1d04ec4acf': Catching exception calling messaging system
    I configured simple scenario.
    I have set up the 2 ID flows :
    - Partner 1 (Sender File) > (Partner 2) Receiver EDISeprator (didnt used any conversion modules)
    - Partner 3 (Sender EDISeparator with Edifact Module) > to SOAP sending B2B XML to another PI system.
    Done B2B **** Pit file Association.
    Tested in B2B COckpit and it is working fine but working in E2E
    Also note that this is not a Custom EDI. This is just Order D93A Standard message file containing multiple Orders in same file.
    Also let me know one thing Is it required to make KEY Associations for standard EDIFACT Structure Secnario as well?
    I understand from the above error that is able to lookUP the 2nd flow EDI Sender Channel ID but it is unable to deliver/despatch the message content to that flow.
    KINDLY HELP ME>

    Hi Dimitri,
    I tested again now with changing control key association.
    am getting below error::
    Message could not be forwarded to the JCA adapter. Reason: com.sap.aii.adapter.ediseparator.ra.integration.DispatchException: Message cannot be dispatched: Message cannot be dispatched: senderChannel 'a9e6939add043c39883683175abea3ba': Catching exception calling messaging system
    I delcared key associations for both flows.
    FILE-->EDI Seperator and EDI Seperator to SOAP.
    Could you please review it and guide me?
    Regards
    Amarsrinivas Eli

  • EDI Translator Issues

    Hi,
    Please let me know whether to pose queries related to Trusted Link Enterprise(Edi transalator). Do we have separate forum or request to give any other links found.
    Thanks and Regards,
    B.Anandha Krishnan.

    Hi,
    You can go for SAP XI for EDI translations.
    Regards
    Praveen

  • EDI Process Delivery interface

    Dear Experts,
    I have a Outbound Delivery Interface, i need to trigger an outbound IDoc through VL71 transaction. Please let me soon.
    Thanks
    Kp

    Hi ,
    Through delivery Process  ASN can be sent to customer.
    All other master data and process steps are same.
    You have to make following settings in the system
    1) Create port (WE21)
    2) Set up Partner Profile WE20
    3) Create condition records in NACE for V2(Shipping) , output type LAVA. (Communication type withh me EDI (6))
    4)  during outbound delivery save/Goods issue , the o/p type should be triggered and generate the IDoc.
    This IDoc is an outbound idoc. Check WE02 for idocs. You will find a inbound Idoc -> which we will inturn create an Inbound delivery (ASN) automatically.
    Configure the steps.If you need further more help on this.Please get back.
    Best Regards,
    Nisha

  • EDI 850's Interface File Data program errors out

    This is interface dile data program completes in error for EDI 850. Prior to this we had issues saying "error starting toolkit", but that was resolved by the DBA's. Now that error has gone and this error is coming up.
    Below is the error message:
    Version 12.1.3
    DB : 11g
    +-----------------------------
    | Starting concurrent program execution...
    +-----------------------------
    Arguments
    P_TRANSACTION_TYPE='POO'
    P_FILE_PATH='/interface/infvmmci/ECRP2/outgoing'
    P_FILE_NAME='VMMC850.dat.20120702215742'
    P_MAP_CODE='EC_POO_FF'
    Execution options
    VERSION=2.0b ORIENTATION=LANDSCAPE
    Current NLS_LANG and NLS_NUMERIC_CHARACTERS Environment Variables are :
    American_America.US7ASCII
    Enter Password:
    REP-1401: 'p_run_idformula': Fatal PL/SQL error occurred.
    REP-0069: Internal error
    REP-57054: In-process job terminated:Terminated with error:
    REP-1401: 'p_run_idformula': Fatal PL/SQL error occurred.
    Report Builder: Release 10.1.2.3.0 - Production on Mon Jul 2 21:58:53 2012
    Copyright (c) 1982, 2005, Oracle. All rights reserved.
    Start of log messages from FND_FILE
    End of log messages from FND_FILE
    Program exited with status 1
    Concurrent Manager encountered an error while running Oracle*Report for your concurrent request 5710284.
    Review your concurrent request log and/or report output file for more detailed information.
    Executing request completion options...
    Output file size:
    0
    Finished executing request completion options.
    Kindly help,
    Ganapathy

    Please see if these docs help.
    Interface File Data Program Fails With REP-1401 Error [ID 1415103.1]
    850 POI Inbound EDI ECEPOI Error ORA-29284: file read error. [ID 565059.1]
    Running Interface File Data, Completes With Error. [ID 563879.1]
    How to Ensure Outbound 856 (DSNO) documents are generated [ID 1432829.1]
    Thanks,
    Hussein

  • EDI to RFC interface

    Hi,
    I'm about to implement Spec2000 to RFC interface. since XI does not support EDI (no EDI adaptors available) i'll have choose one out of two options:
    1. manipulate EDI as it was regular text file.
    2. use 3rd party tool as an adaptor.
    i belies my first option is complicated and clearly has great risk, so i'm looking for as much leads as i can get.
    Tnx in advance
    Uri

    >
    uri karagila wrote:
    > Hi,
    >
    > I'm about to implement Spec2000 to RFC interface. since XI does not support EDI (no EDI adaptors available) i'll have choose one out of two options:
    >
    > 1. manipulate EDI as it was regular text file.
    > 2. use 3rd party tool as an adaptor.
    >
    > i belies my first option is complicated and clearly has great risk, so i'm looking for as much leads as i can get.
    >
    > Tnx in advance
    >
    > Uri
    Option 1 - I guess that is not a good idea considering the complexity in EDI messages. But then it denpends how many interfaces you have. If there are very less say under 10 interfaces using the EDI spec. then it is still worth investing time and money on coming up with the manipulation but else.... its a night mare.
    Option 2 - There are various third party adapter available ex. seeburger, iway etc which you can make use. Only thing is it comes with a cost but life becomes much easier.

  • Checking EDI Transmission Status (850 PO Outbound)

    Hi,
    We have implemented the 850 outbound PO EDI transaction for our customer. We would like to explore the following options for further tracking of the EDI sent to the factory.
    Background:
    EDI extract is generated in Oracle Apps using 850 outbound transaction (PO). This EDI extract is sent to our supplier/factory where it is converted into a Sales Order. The EDI is transmitted to the factory using FTP mechanism.
    Requirement:
    We would like to know if there is any way in which the factory can send back a response to say Oracle Apps, that confirms that the EDI extract has reached it correctly. This is to ensure smoother transmission of the EDI to the factory.
    If there has been a similar scenario, then please share your views/thoughts on this.
    Thanks,
    Nitin Jain

    Hi
    yes, we have Rosettanet Standard which fulfills your requirement.
    You need to implement Rosettanet Standard using any Integration Tol (webMethods is best suited for Rosettanet).
    I have been in a project of same kind, we developed for POO and POCO in the same way. Once the TP gets the data, and he will confirm us saying that whether he will manufacture or not....
    Plz surf this website www.rosettanet.org

  • EDI - SAP -- Sterling Interfacing

    Hello ,
    I am currently working on IDoc - EDI 810 to sterling & EDI 850  to IDoc .
    I want to understand interfacing using IDOC - EDI 810 . 850 with Sterling & role of XI/PI in case needed .
    Can we send XML files to sterling  ?
    Also want to understand any thing sterling would need us to provide them
    Thanks.

    The only one i know of is True Commerce
    http://www.truecommerce.com/complete_solution/acct_pkg/sap.php
    not sure of what the price is.

Maybe you are looking for