Edit a form created with a template

I created a page by using a template in Dreamweaver. It was an invitaiton form:
http://www.eddieandalice.com/invite.html
I didn't use validation fields (lack of knowledge at the time). I am trying to go back and make that happen however, when I try to add a validation field, it tells me the header is locked andI cannot.
Can I unock the header momentarily or how can I make these changes?
Thnaks in advance,
Rob
Gramps, if you see this, this is the ministry site I will be making the honeypot for.

Open the template for this page (Select Modify > Templates > Open Attached Template) and add these comments into the <head>...</head> section:
<head>
<meta http-equiv="Content-Type" content="text/html; charset=utf-8" />
<title>Eddie and Alice Smith</title>
<!-- TemplateBeginEditable name="head" -->
<!-- TemplateEndEditable -->
<link href="css/main_css.css" rel="stylesheet" type="text/css" />
<script src="SpryAssets/SpryMenuBar.js" type="text/javascript"></script>
<link href="SpryAssets/SpryMenuBarHorizontal.css" rel="stylesheet" type="text/css" /></head>
You have probably deleted these comments when creating the template. These lines allow Dreamweaver to add code into the <head> section. Save your template and say Yes to allow the changes to pages that use this template (or just to the pages you want).
See http://help.adobe.com/en_US/dreamweaver/cs/using/WScbb6b82af5544594822510a94ae8d65-7acda.h tml for more information.

Similar Messages

  • I am unable to edit a form created with LiveCycle version 8.5 with LiveCycle Version ES1.

    I am trying to edit a form created with LiveCycle version 8.08.2073 (installed with Adobe Pro 8).  I am using LiveCycle version ES (installed with Adobe Pro 9).  I can open the fhe form, but the tools are greyed out.  It apears the file is locked for editing, but I cannot determine where/how to unlock it.

    You should try to start in safe mode which runs a file check. You hold the shift key down during a start up till there is a progress bar towards thr bottom of the screen. This start will take a longer time than normal. In safe mode try the functioins you are having problems with to see if there is an improvement. Some links below to read.
    http://support.apple.com/kb/ht1564
    http://support.apple.com/kb/ht1455

  • I have adobe xi pro, but i can´t edit a form create with adobe 8.0, the message is this form can´t be edit with adobe, use adobe livecycle designer. need I to buy another program?

    I have adobe xi pro, but i can´t edit a form created with adobe 8.0. The message is: this form can´t be edit with adobe, use adobe livecycle designer. need I to buy another program?

    If the form was created using LCD then it can only be edited there. This
    application used to be bundled with Acrobat Pro, but that's no longer the
    case. So if you want to edit this file then you need to purchase it, yes.
    On Sat, Apr 4, 2015 at 6:39 PM, monicad4417911 <[email protected]>

  • Editing a form created with trial version of XI

    I have some forms that I have created with the trial version of Adobe XI and now I need to edit them. I keep getting an error that says the file is restricted and asks me to save a copy that is not restricted. When I save the copy, it won't let me edit that copy either.... HELP!!!!

    Pay close attention to the saving process. When you save a copy, it makes a NEW COPY of the file, and leaves you with the old file open. You therefore have to CLOSE the file you have open, and OPEN THE COPY.
    In general, be sure to save PDF files BEFORE adding the special rights, because you sometimes can't go back at all.

  • How to delete hyperlink (Remove signature) in a form created with InfoPath

    Hello. 
    We have Sharepoint 2013 Foundation in production. It work with forms created with InfoPath. In these forms, digital signatures are used to approve. The problem is that once you have signed the forms, the user can remove the signature. That's what we want to
    avoid.
    Which file should I edit to remove the hyperlink? I can not find how to do it. Do you know a better option? 
    Greetings.
    MCSA: Windows Server 2008

    Hi,
    According to your post, my understanding is that you want to delete hyperlink (Remove signature) in a form created with InfoPath.
    As far as I know, there is no OOTB way to achieve this. You need to use custom code to prevent removal of digital signatures.
    Please add the OnBeforeChange handler code to the "signatureN" group where the signature is stored, not to the section you are signing.
    In other words (my excample) browse to :
    Tools - Form Options - Digital Signatures - "Enable digital signature for specific data" - Modify/Add
    Note the "Store signatures in the following group" value. It will be a read only value, eg /my:myFields/my:signature3/my:signature4
    Here is a similar thread for your reference:
    http://www.infopathdev.com/forums/p/3661/12829.aspx#12829
    Best Regards,
    Linda Li
    Linda Li
    TechNet Community Support

  • "Xml Form" Created with Form Builder  in a CO

    Is it possible to assign a "XML FORM" created with the tool Form Builder of Portal, and assign it to a CO?
    Regards
    David
    Message was edited by:
            David Valenzuela

    Is it possible to assign a "XML FORM" created with the tool Form Builder of Portal, and assign it to a CO?
    Regards
    David
    Message was edited by:
            David Valenzuela

  • I have a online form created with my paid account that has just stopped working.

    I have a online form created with my paid account that has been working for months that just started displaying a message that starts "This form was easily created for FREE with FormsCentral. See how..." The inline frame that it shows up in has also changed to be very small. The form is set to open in FormsCentral and shows the message and inline frame size when I choose preview. What's up?

    Checked when I got back in to work today and everything is working as it should. All of our online forms were screwed up yesterday, but are working this morning. I know this won't help anyone in the future, but just wanted to follow-up.

  • Can I edit a form created in Adobe Designer/livecycle in Acrobat Pro. 8

    Hello
    I have a client that sends me PDF's created in LiveCycle.  IN the past I've used the following information to open these files.
    You can however create a workaround if you absolutely must edit an LCD form in Acrobat. If the form is not a Dynamic form, open the form in Acrobat and choose Document | Extract Pages. (You'll know if the form is not a dynamic form if the Extract Pages command is not grayed out). The extracted pages will not permit accessing the form objects in Acrobat. All scripts in the document are lost and naming conventions for field objects are bizarre. However, the form is editable.
    If you want to convert an LCD dynamic form to an editable Acrobat form, you need to use Acrobat 7 Pro. This won't work in Acrobat 8. In Acrobat 7 Pro choose File | Create PDF | From Web Page. Open the form in the Create PDF From Web Page dialog box. Again, all scripts are lost and field object names are bizarre, but you can edit the form in Acrobat 7 or 8 Pro.
    But these files must be saved as Dynamic pdf's. I have tried saving them as static forms but the Document | Extract Pages is still greyed out when I open in Professional?  What gives how can I get around this most annoying situation?  I need to get the extract pages from being greyed out?
    Thanks,
    Dan

    Acrobat 8 Professional includes LiveCycle Designer 8, so if the form was created with LiveCycle Designer 8 or older, the yes should have the option to edit the form. Acrobat 8 Professional under the menu option 'Forms' will have an option to open the form in LiveCycle Designer. If the form was created with a newer version, there could be some issues with newer features not available in version 8.

  • Ability to edit a form created in Forms Central

    When I open a form created in forms central in acrobat pro XI, how can I get permission to add a watermark?  The system says I do not have permission to make the change.  That makes sense, but can I save it in Forms Central with a password that would allow me to further edit it is Acrobat Pro XI?  Is there an alternative solution?

    Hi;
    This FAQ describes how to edit a FormsCentral PDF in Acrobat: http://forums.adobe.com/docs/DOC-3661
    Thanks,
    Josh

  • Invoice Forms created with Adobe X - default value for "total" column should be blank

    I am new to the forum and just finding my way around.  Thank you for any help.
    I've created an invoice template in Word, then imported it into Adobe X Pro to turn it into a form.  Pretty simple, but one thing is troubling me.  I have the usual description, quantity, price each, and total columns.  The "total" columns are defaulting with a "0" in them, and I'd prefer they default blank unless an entry is made on that line.  I have right-clicked the "total" fields properties and the default values are blank already, but a zero still shows up.  I  know it can be done because one of my earlier forms defaults to a blank space until I entered something on that line. Then it calculated.  How can I make the "total" column blank unless something is entered there?
    Secondly, when I save a form and want to go back to make changes, I'm not seeing how to do this.  It seems to save as a .pdf, and if I want to modify the form portion I have to start all over from scratch.  What am I missing?
    Thanks so much for any help.

    George, thank you for the response.
    I've entered the script, and no change.  The "total" columns still show a (zero) 0 even when I have not entered anything in that line.
    For example:
    Description             Qty     Unit Price     Total
                                                                             0
                                                                             0
                                                                             0
    etc... all the day down the form.
    I'd like the zeroes not to appear when there is nothing on the Description lines.
    Incidentally, when selecting fields to use for calculations for the "total" column, we're supposed to place a check mark in the box of the fields to be calculated - and I can't CLICK in them.  I have to use the space bar.  Is that how it is supposed to work?
    Thanks for your quick response.
    J
    I

  • Need to edit a form created in Adobe Acrobat Pro X

    I created a form in Adobe Acrobat Pro X but now I can't edit the form questions, I know I'm missing something obvious but its driving me nuts right now.

    here is a link to the file:
    Wikisend: free file sharing service
    I want to be able to edit the following:
    I Squared R, LLC
    Meeting Attendance Form
    1-901-0001-00001 Revision 1
    and pretty much everything else... I created the file a while ago but I cant remember how to edit the file and I really don't want to have to redo everything again. As far as i can figure out the file isn't locked or anything. Any ideas?

  • Does a client need Acrobat 9 Pro, to use a form created with the program?

    Do you need to have Adobe Acrobat 9 Pro, in order to use and/or view forms and portfolios created with Adobe Acrobat 9 Pro?
    If so, is there a free version that I can direct clients to download, so that they will be able to use and or view documents I am creating with Acrobat 9 Pro?

    Will the user be able to save the form with the data he/she entered?
    That depends upon if the file is specially Reader enabled. For some forms Acrobat Standard or higher is needed to file and save form data.

  • Text fields special characters problem in forms created with ID

    Hi there,
    I'm creating form document with ID.
    The problem with special characters appears after exporting file to interactive pdf.
    When filling up text field, special characters (polish language specials in my case) are replaced by squares.
    I do not know if this is a ID problem (and I should set encoding during pdf creation somehow) or Acrobat/Reader problem (tried both and also in Polish or English versions).
    Some help would be appreciated.

    I am Creative Cloud User and downloaded fresh ID less than 2 hours ago.. And honestly the last thing I would think about was updating.
    But in fact - it was the problem.
    So thank you very much for help!

  • Form created with Livecycle Designer with a SQL database - do you need LiveCycle Forms installed?

    Hello,
    I'm REALLY hoping someone here can help me, I have spent over four hours on the phone to Adobe in the last 3 days and I'm getting no where what-so-ever. I can't even find out where /how to complain about it! (but thats another story)
    Here's my situtation:
    I work for a company with approx 140 staff. On one computer, we have Adobe Livecycle Designer ES installed, and we have used that program to create a form which has a link to a SQL database.
    The link in this form doesn't work on the other computers which has the basic (free) Adobe Reader. From doing research within these forums
     , I have found that the form will not work on other computers unless they have Adobe Livecycle forms installed on their machines. 
    What I need to know (and what they cannot seem to tell me when I call), is two things:
    Is it correct that in order to use a form created in Livecycle Designer which has a link to a SQL database, that the machine must have LiveCycle forms installed?
    How much does Adobe LiveCycle Forms costs?
    PLEASE, if you can answer this question, I would REALLY appriciate it....
    Thank you!

    I presume you are asking if you need Livecycle Forms ES? Forms ES is a component of the livecycle software suite intended as a document service which will be installed on a server within the organisation. A couple of things this document service can do is to render XDP into multiple formats (PDF, html, etc.), execute script server side (for example the database connection) on behalf of the client (reader, etc.), integrate with backend components, etc. So no you do not install this on each client.
    For database connections to work, you either have a server with Forms ES installed which can connect on each clients behalf (ie. Client->Forms ES Server->Database), or you have a reader-extended PDF to allow connections to be use in the free basic Reader (i.e. direct calls to the database or using web service calls to your own database components). However, reader-extended pdf would probably require Reader Extensions ES component installed on a server (you once off extend your developed pdf through this and then hand it out to each of the end users). Not sure if the Acrobat Reader extensions will cover this functionality since I have not tried that. I dont think it does. Otherwise you would need full acrobat on each client.
    How much database integration is your form actually doing at the moment? read only? Full access? And how many clients do you expect to hit your database? Depending on what you need the form to do, there is always the option to try and build the integration yourself. Do simple http submits from the browser (hosting reader as a plugin) to some component somewhere which in turn hits your database. Wouldnt require additional licensing but alot more development work.
    As for cost for the various components, thats a question only Adobe can answer for you since they all sit squarely in the enterprise space and licensing for that is not as simple as off the shelf products.
    Maybe someone else has a view on it or has an alternative.

  • Data import for users of forms created with Livecycle Designer

    Hello,
    I have seen several posts regarding data import for forms created by Livecycle Designer but nothing that helps with something I am trying to accomplish.  I can create a data connection and import information in a form but what I would like to do is import data, then send the pdf for completion to a user.  There are a few data elements that I have available and the rest of the information comes from from the user.  The problem I run into is once I create a data connection, the pdf is ALWAYS looking for the source file for that data.  I simply want to prepopulate some fields and send to the various users for completion.  Any help would be greatly appreciated.
    Thanks!

    Which type of Data Connection are you trying to create?
    XML Schema, Sample Data File or WSDL?
    Creating any one of first two types(mentioned above) will only create schema and will never import any data into PDF.
    If you create the WSDL connection, you can surely import data (i.e. prepopulate data) into your PDF and forward it for users review/fill.
    If I misunderstood your question, please get me clarified.
    Nith

Maybe you are looking for