Text fields special characters problem in forms created with ID
Hi there,
I'm creating form document with ID.
The problem with special characters appears after exporting file to interactive pdf.
When filling up text field, special characters (polish language specials in my case) are replaced by squares.
I do not know if this is a ID problem (and I should set encoding during pdf creation somehow) or Acrobat/Reader problem (tried both and also in Polish or English versions).
Some help would be appreciated.
I am Creative Cloud User and downloaded fresh ID less than 2 hours ago.. And honestly the last thing I would think about was updating.
But in fact - it was the problem.
So thank you very much for help!
Similar Messages
-
When viewing most text on most websites, it displays properly. However, there are two instances where text will either tend to, or consistently, become jumbled into a mess of seemingly random characters. Oddly enough, these seemingly random characters are not, in fact, random. The same weird character will be used to replace the same regular English text character consistently across the entire area that has been jumbled.
The two instances where this tends to occur most often, or consistently in some cases, are, first, when a paragraph or particular section of formatted text contains special characters, such as Chinese or Japanese characters, or accented letters. When this happens, usually the paragraph that contains the special characters is completely jumbled, while the rest of the text on the page will have intermittent jumbling on a word or two. Most often, the word "the" is jumbled in this case.
The second instance where this happens is when a website uses specially formatted text in some form or another. I, not being an expert at web development, am not sure what kind of formatting causes it, but I can provide consistent examples in lieu of my experience:
- Example 1:
[http://img408.imageshack.us/img408/9564/firefoxcharencodingissu.jpg]
Example 1 shows a portion of a screen-shot of the website "Joystiq.com". Every single article title on the front page of this blog is consistently jumbled, while the text of the article itself remains untouched. Please note that when this jumbled text is highlighted, it is visible un-jumbled in the right-click menu as well as in the source code of the page. Other consistent instances can be found within many search fields on various websites. For instance, the search bar located at the top right of "Kotaku.com" consistently displays jumbled characters both on its default text of "Search" and on any text that is typed into the search box itself.
- Example 2:
[http://img822.imageshack.us/img822/9564/firefoxcharencodingissu.jpg]
Example 2 shows both the jumbling of the paragraph containing the character "☆" as well as the subsequent peppering of the rest of the article's text with small jumbled words. Below this is the DOM Source of the selected text which shows how the text itself is being rendered properly within the site's source. Additionally, for convenience, I have edited on to the bottom of the image a small snippet of what the search bar on the same page looks like. Notice how the grayed-out text that normally would read "Search" is instead jumbled.
This issue has been plaguing my browser for the past year or so, and I had hoped that it would go away with subsequent Firefox updates. It has not gone away.
Thank you for reading! Please help!This issue can be caused by an old bitmap version of the Helvetica or Geneva font or (bitmap) fonts that Firefox can't display in that size.
Firefox can't display some old bitmap fonts in a larger size and displays gibberish instead.
You can test that by zooming out (View > Zoom > Zoom Out, Ctrl -) to make the text smaller.
Uninstall (remove) all variants of that not working font to make Firefox use another font or see if you can find a True type version that doesn't show the problem.
There have also been fonts with a Chinese name reported that identify themselves as Helvetica, so check that as well.
Use this test to see if the Helvetica font is causing it (Copy & Paste the code in the location bar and press Enter):
<pre><nowiki>data:text/html,
Helvetica<br><font face="Helvetica" size="25">abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ</font><br>
Helvetica Neue<br><font face="Helvetica Neue" size="25">abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ</font>
</nowiki></pre>
You should reset the network.http prefs that show user set on the about:config page.<br />
Not all websites support http pipelining and if they do not then you can have issues with images or other problems.
See also http://kb.mozillazine.org/Images_or_animations_do_not_load#First_steps -
How do I complete an electronic signature field in an Interactive PDF form (created in Indesign)? This form will serve as an employment application on a website. The goal is to have any person (interested in applying for a job via the Internet) access, complete and electronically sign the form upon submission.
Hi,
Via createPDF you would not be able to electronic sign the PDF form, you would either require Adobe Reader or purchase Adobe Acrobat to sign the PDF.
To download Adobe Reader
http://get.adobe.com/reader/
You can purchase Adobe Acrobat
http://www.adobe.com
~Pranav -
Here's the problem. I have a text field called Manager in an InfoPath 2010 form that is getting populated by a drop down field called
Business Unit.
The Business Unit drop-down field is pulling information from
column A in a custom list via a managed data connection. The custom List has two columns:
Title & Manager.
The Manager column in the custom list is a 'Person or Group' type column.
The Data Connection pulls both the Title, Manager
(and ID) data.
There is a rule on the Business Unit drop-down field to change the value of the
Manager text field with the Manager data on the custom list. The rule pulls the
Manager information and filters the value to match the
Business Unit on the Data Connection with the Business Unit drop-down
field value (Main).
The Business Unit drop-down field works great and pulls the value from the custom list, and the rule populates the Manager text field. The problem is that Manager text field shows the name as such:
[smith,, john]. Notice the two commas between the last and first name. There should only be
one comma!
Anyone have an idea why the text field is appearing with two commas?
ArnelHi all,
I have a workaround for this. I have an InfoPath 2010 form pulling data from a SP2010 list. The user chooses a System (Business Unit) from the dropdown list and that choice auto populates the associated user (Manager) for that system. I had to
use concatenation, substring before and substring after to display the correct data.
concat(substring-before(DisplayName, ",, "), ", ", substring-after(DisplayName, ",, "))
DisplayName is the original data for the field. I am able to cut & paste this field into the formula. Therefore, I added a few spaces to separate it from the actually formula for future use.
Select Insert Function
Select concat
Select the first link to double-click to insert field
and then select Insert Function
Select the Text category and choose substring-before
Select the third link to double-click to insert field
and then select Insert Function
Select the Text category and choose substring-after
Copy and paste your fieldname (in my case DisplayName) in the
double-click to insert field
parts of the substring-before and substring-after links.
Delete the middle double-click to insert field link
Add quotes, spaces and commas so that they match the following format:
concat(substring-before(DisplayName, ",, "), ", ", substring-after(DisplayName,
Translation:
concat(substring-before(Doe,, John, ",, "), ", ", substring-after(Doe,,
John, ",, "))
Bring together all of the text before ",," (i.e. Doe) with ", " (comma, space) and all text after ",," (i.e. John).
It should return
Doe, John.
I hope this makes sense. I have these instructions with screenshots if you need them, contact me. -
How to delete hyperlink (Remove signature) in a form created with InfoPath
Hello.
We have Sharepoint 2013 Foundation in production. It work with forms created with InfoPath. In these forms, digital signatures are used to approve. The problem is that once you have signed the forms, the user can remove the signature. That's what we want to
avoid.
Which file should I edit to remove the hyperlink? I can not find how to do it. Do you know a better option?
Greetings.
MCSA: Windows Server 2008Hi,
According to your post, my understanding is that you want to delete hyperlink (Remove signature) in a form created with InfoPath.
As far as I know, there is no OOTB way to achieve this. You need to use custom code to prevent removal of digital signatures.
Please add the OnBeforeChange handler code to the "signatureN" group where the signature is stored, not to the section you are signing.
In other words (my excample) browse to :
Tools - Form Options - Digital Signatures - "Enable digital signature for specific data" - Modify/Add
Note the "Store signatures in the following group" value. It will be a read only value, eg /my:myFields/my:signature3/my:signature4
Here is a similar thread for your reference:
http://www.infopathdev.com/forums/p/3661/12829.aspx#12829
Best Regards,
Linda Li
Linda Li
TechNet Community Support -
I am trying to edit a form created with LiveCycle version 8.08.2073 (installed with Adobe Pro 8). I am using LiveCycle version ES (installed with Adobe Pro 9). I can open the fhe form, but the tools are greyed out. It apears the file is locked for editing, but I cannot determine where/how to unlock it.
You should try to start in safe mode which runs a file check. You hold the shift key down during a start up till there is a progress bar towards thr bottom of the screen. This start will take a longer time than normal. In safe mode try the functioins you are having problems with to see if there is an improvement. Some links below to read.
http://support.apple.com/kb/ht1564
http://support.apple.com/kb/ht1455 -
Reading forms created with formscentral on kindle v3.0.2
text fields are empty when viewing pdfs created on formscentral on kindle
The PDFs from FormsCentral will work in Adobe Reader, once you are not using Adobe Reader there are no guarantees, they should not be able to be submitted with any other PDF viewer, but the content should be viewable in most, but not always.
If you have Adobe Acrobat you could try saving the PDF in a few ways and testing on the Kindle, one thing that should work is saving as an image and then converting that image to PDF, but it would not be "interactive" so if any multi-line text field input extends beyond the visible box it would not scroll.
Thanks,
Josh -
I have a online form created with my paid account that has just stopped working.
I have a online form created with my paid account that has been working for months that just started displaying a message that starts "This form was easily created for FREE with FormsCentral. See how..." The inline frame that it shows up in has also changed to be very small. The form is set to open in FormsCentral and shows the message and inline frame size when I choose preview. What's up?
Checked when I got back in to work today and everything is working as it should. All of our online forms were screwed up yesterday, but are working this morning. I know this won't help anyone in the future, but just wanted to follow-up.
-
I have adobe xi pro, but i can´t edit a form created with adobe 8.0. The message is: this form can´t be edit with adobe, use adobe livecycle designer. need I to buy another program?
If the form was created using LCD then it can only be edited there. This
application used to be bundled with Acrobat Pro, but that's no longer the
case. So if you want to edit this file then you need to purchase it, yes.
On Sat, Apr 4, 2015 at 6:39 PM, monicad4417911 <[email protected]> -
"Xml Form" Created with Form Builder in a CO
Is it possible to assign a "XML FORM" created with the tool Form Builder of Portal, and assign it to a CO?
Regards
David
Message was edited by:
David ValenzuelaIs it possible to assign a "XML FORM" created with the tool Form Builder of Portal, and assign it to a CO?
Regards
David
Message was edited by:
David Valenzuela -
Remove spaces and special characters from a form field
Hi,
I am tragically new to all of this, but am trying to create a form in Adobe Acrobat 9. I am trying to use a Custom Format script to take inputs in a form field and automatically remove spaces and special characters (hyphens specifically). For example, if a user inputs "RAN-99 06" I would like it to change to "RAN9906." I found this script that will not let users input special characters
if (!event.willCommit) {
event.change = event.change.replace(/[\$#~%\*\*\^\-\(\)\+=\[\]\{\};\"\<\>\?\|\\\!]/g, "");
And that's okay, but I can't figure out how to disallow spaces. Also, the perference would be for a script to allow users to input the data as they like, but to clean it up after they leave the text field.
Thanks in advance!From the description, I assume that the script is currently in the Keystroke event. In fact, that would be a most logical way to have it; simply ignore anything unwanted when entered.
If you want to allow the user to enter anything, but "clean it up" when done, you would place your code in the Validate event. You will have to adjust your Regular Expression so that it works globally, but that's the whole difference. This will change the value.
Note that you can also enter the code into the Format event. However, that would only change the visual representation of the value, but internally, the value would remain as entered.
Hope this can help.
Max Wyss. -
How do I create a form with text fields that can continue to multiple pages with out it over lapping
I have created a form in Livecycle and have made every object a sub field. But I am still having the same probably. The text field only continues on to a second page and overlaps the footer I have created at the bottom of the page. I am new to livecycle and have tried a lot of different things to fix this problem. Help would be greatly appreciated.
Hi,
I've found this blog http://blogs.uoregon.edu/developments/2010/12/29/pdf-making-text-fields-grow-to-accommodat e-text/ and this example file : flowableTest.pdf? Is it close to what you search? I cannot go deeper into example now, but will. -
Oracle text search - special characters issue
Hi.
I'm facing a real annoying problem with text search query, and everything I've tried failed...
I have a table with a varchar column indexed by text index. The column contains special characters like '&', ',' and mainly- '-'. Since I want to disregard these special characters for searches I have created a basic lexer of type skipjoins for the column index. So now, the phrase 'aaa-bbb something'. for example, can be searched without '-', like this: 'aaabbb'. But I want to make it possible for this phrase to be searched with and without '-'. So, that when the user enters 'aaabbb' he will get the same results as when he enters 'aaa-bbb'.
In other words, This condition:
WHERE CONTAINS(column, '<query> <textquery grammar="context"> <progression><seq>'
||'aaabbb'
||'</seq></progression> </textquery> </query> ' ,1)> 2
Will return the same results as this condition:
WHERE CONTAINS(r.POI_NAME, '<query> <textquery grammar="context"> <progression><seq>'
||'aaa-bbb'
||'</seq></progression> </textquery> </query> ' ,1)> 2
Since text query treats the '-' sign as a minus sign and searches for 'aaa' which doesn't contain 'bbb', the only way I found to fix this was to wrap the search text with {}. like this:
WHERE CONTAINS(r.POI_NAME, '<query> <textquery grammar="context"> <progression><seq>'
||'{aaa-bbb}'
||'</seq></progression> </textquery> </query> ' ,1)> 2
This all went very well, until I wanted to create a relaxation query. like this:
WHERE CONTAINS(r.POI_NAME, '<query> <textquery grammar="context"> <progression><seq>'
||'{aaab}'
||'</seq><seq>'
||'{aaab}'
||'%</seq></progression> </textquery> </query> ' ,1)> 2
In this case, I would expect the first part of the query to return no results (since it's not the whole word) but the second part, using '%' should have returned the record of 'aaa-bbb'. It doesn't. It will only return my result if I remove the '{}' for the second part. I can't do that, because the exact same search, when containing '-', will not return the expected results when I remove the braces (the sign is treated as minus sign):
WHERE CONTAINS(r.POI_NAME, '<query> <textquery grammar="context"> <progression><seq>'
||'{aaab}'
||'</seq><seq>'
||'aaa-b'
||'%</seq></progression> </textquery> </query> ' ,1)> 2
So I now have no solution. My question is- How can I create a query that will disregard the minus sign and treat it as a regular sign, but would still handle percentage sign as a special sign. So that I could run a query like the last example and will get the results of searching the phrase 'aaa-b%'?
In short, and to simplify my question, I'm looking for a way to escape all characters (not only the minus sign) except for a specific character. Kind of like 'unescaping' a specific character (the '%' sign) within braces {}. Or, another way would be to remove the space that is added to the phrase inside the braces at the end of the word, preventing me from adding "%" at the end of the word, outside the braces.
Thanks you,
NiliI'm looking for a way to escape all characters (not only the minus sign) except for a specific character. Kind of like 'unescaping' a specific character (the '%' sign) within braces {}What about if you apply a function like regexp_replace to escape all known "specific characters", and then unescape the particular specific character again back as e.g. in
SQL> select 'a.da-df%df*' str, replace (
regexp_replace (
'a.da-df%df*',
'([[:punct:]])',
'\\\1'
str2
from dual
STR STR2
a.da-df%df* a\.da\-df%df\*
1 row selected.i.e. don't escape with curly brackets but with the backslash character.
You can then use this string in your query like in
WHERE CONTAINS(r.POI_NAME, '<query> <textquery grammar="context"> <progression><seq>'
||'aaab'
||'</seq><seq>'
||'aaa\-b'
||'%</seq></progression> </textquery> </query> ' ,1)> 2 -
Metadata special characters problem
You would be forgiven for thinking it easy to add a caption for each image to identify the photographer and her credentials. Metadata is there for that purpose and the IPTC "Author" field seems an obvious choice.
However, most letters-after-your-name will contain special characters eg.
Gordon Bennett FRPS; MPAGB; EFIAP/b.
and these cause huge problems to the Adobe products that seem to have gone un guided.
If these are entered into the Metadata in the File Info panel in say Photoshop or Bridge they are recorded correctly. When reading the Metadata from file in Lightroom (Vista version) however, only the text up to the first semicolon in the above example is transferred. The same problem occurs with the slash. Thus all the Lightroom modules work on incomplete data.
(I have neither special character set as a keyword seperator in Preferences).
Is there some coding tag that can be wrapped round this text to ensure it is published correctly by the web module ?Hi Kenneth,
Thanks very much for your comments.
In Preferences>File Handing I have de-selected the option to have Lightroom use forward slash as a keyword seperator. My understanding is that therefore it should not do so.
Do you mean that Vista overrides this? or is it simply the Vista version of Lightroom that is doing it.
I had noticed that if a comma is used to seperate keywords that both Bridge and Photoshop replaces them with semicolons and it seems that you cannot prevent this.
Do you know something about how this mechanism works and if it can be varied?
As for an answer to your question of "what shows up in the fileds" I don't think you can tell. Although you can in Bridge/Photoshop by examining the File Info panel, in Lightroom it just disappears into the "catalogue" and cannot be examined. It is displayed of course in the Lr metadata panel but that is where we started, with truncated fields !! However if you save the apparently truncated metadata xmp in Lr then force a read again in Bridge, the full data seems to still be there. Thus it would seem this is a problem specific to Lr and the way it displays metadata containing special characters.
Any further info on the Vista issue would be very welcome. -
I am having the file-xi-proxy inerface.
In the input file i have one field called "description"(50 in length). The vendor is
giving the input file with special characters in the description field. XI is able to
read the file. BUt during the mapping it is failing ( no transformation I am using.
Just it is a one to one mapping). HOw to pass the message through XI without failing
I am using file type as text and file encoding as UTF-8
Any help in this regard is highly appreciated.
Regards
kumarHi Palnati,
You could try to replace this characters with the help of a
user defined function or xslt mapping....
the special characters are '#' and '=' .. If so you can add them in RSKC ..
And then load from the PSA to your data target ..
Have a look at this thread...
Korean language issue in XI
/people/siegfried.szameitat/blog/2005/07/18/text-infoobjects-part-1
Reward points if this helps
Regards
Vani.
Maybe you are looking for
-
DW CS5.5 Testing server setup - Help!!
Hi everyone, Sorry if this is in the incorrect place for this error but I an having difficulties running a test server for php testing. I am running MacBook Pro, Lion and have Xampp installed. DW CS5.5 Databases access via phpmyadmin works fine. Ok s
-
How can I delete files from My Mac Book Pro safely to create more space?
Hi, I need to delete files from my Mac Book Pro and I am not sure how to do it safely without affecting my computers drivers or operations. In my Finder - All Files Section there are certain files in the Preview, marked as "PNG Image", Window Image,
-
My HP SmartTouch mmc/sdhc not reading card
My HP IQ524 TouchSmart sc/mcc/sdhc reader not working evan with cards I have used previously
-
Help for Nokia 7610 Supernova White themes
Hello! First of all, i hope you understand, and i ask you my apologize about my english. I have a nokia 7610 Supernova White, and i've made some downloads of some themes to change. However, when i change the theme, the stand-by mode, when i want to s
-
How to use currency infoobject
Hi SAP Gurus, Can u please tell me how to use currency infoobject.I have already created currency key figure ,by assigning fixed currency INR.but what to do while transformation and datasource?Do i need to use any rule in transformation? Please tell