Edit as new not working with draft messages?

Occasionally I want to send two similar messages at the same time. I write one message and save it as a draft - usually at this stage without any addresses specified.
I visit the Drafts folder and use Edit as New to open the draft message as what I expect to be a new message, and then make the changes necessary (including a modified subject) to create the second similar message. I then save the second message as a draft.
When I return to the Drafts folder, the second message has overwritten the first. Edit as New does not appear to work correctly in the Drafts folder ......
I can create two similar drafts by starting a completely new message (with Write), and then manually copying the subject & contents of the original draft. However this is a cumbersome process .....
Please can Mozilla be modified so that Edit as New allows multiple draft messages to be created correctly?

Thanks for your feedback. I've looked at the bug report you identified and added my vote to the system.
I have previously tried using Templates for this issue. However, my messages are usually sent to a mailing list. I have found in the past that the mailing list is expanded when the message is sent, and my templates contained the expanded list (which meant that any addresses subsequently added to the mailing list were ignored).
I don't think I've actually tried creating the template without any addresses, even though this is how I currently work with my drafts. I'll do some more experimenting - it might provide a neat solution to several related problems.
Thanks again for your help.

Similar Messages

How to work with draft messages?

I was writing a lengthy e-mail this morning on my desktop computer. I saved it as a Draft and then took my iPad over to Starbucks where I wanted to proof the e-mail, add a little more text, and then send it. Now that I'm at Starbucks I can see the Draft message, but I see no way to continue editing it, or even sending it.
Is there a trick to working with Drafts?
If it matters, I'm a Google Apps user and syncing using the Microsoft Exchange feature. Besides this the e-mail experience on the iPad has been terrific.

Thanks, works perfectly. Can't believe I didn't figure that out on my own - I was looking for an "edit" button or something.

"Edit this Bookmark" not working with two separate "bugs" in 8.1 and 10041 partitions (Nightly). FF x86 ( on Vista) works correctly.

An older bug is when I try to create a new folder; the currently selected folder becomes "edit mode"(highlighted) instead of creating a "New folder" in edit mode. Clip 1.
The newer bug is when I select a folder in which to place the desired shortcut; after [Done] the shortcut stays in [Unsorted Bookmarks]
Clips 2-5 in order.
This has been happening for about 3 days now and persists through nightly updates. Currently 40.0a1 (2015-04-26)

There is always the possibility that things are broken with Nightly alpha 1 builds.
It can take some time before those regressions are fixed, but that is the risk you run.
*Bug 1158553 - Bookmark has wrong localization info when editing it by star button
You can keep an eye on the "The Official Win32 xxxxxxxx builds are not yet out" threads in the mozillaZine Builds forum and reports issues in such a thread.
*http://forums.mozillazine.org/viewforum.php?f=23

'Edit in Photoshop' not working with RAW photos

I'm not sure when this started happening, but right now I can't open DNG or CR2 files (but JPEGs work fine) in photoshop either via the 'Edit in Photoshop' option, or the 'Merge to Panorama/HDR Pro in Photoshop' option. All it does is open the Photoshop application, but doesn't actually open the files I selected within Photoshop. I was able to add Photoshop CS5 in the 'Additional External Editor' section in the pref. pane which allowed me to open the RAW files in photoshop, but the Panorama and HDR Pro options still don't work. I tried reinstalling Photoshop, updated Camera Raw (and the rest of Adobe's products I have installed) to the latest version, reinstalling Lightroom 3.0, upgrading again back to 3.2, deleting the plist files in ~/Library/Preferences/ for both Lightroom and Photoshop, nothings worked. I'm running on a Mac so the registry hacks I've seen while googling aren't going to fix this issue. Has anyone else had this issue?
Thanks in advance,
Chris Lucas

Just came across this, which just worked for me (on a Mac):
http://kb2.adobe.com/cps/401/kb401629.html
Don't know why it took me so long to come across it, but I just successfully open a CR2 file in Photoshop CS5 from Lightroom 3.

Hp Dv6700 Special edition Laptop audio not working with Television Via HDMI

I have a HP Dv6700 Laptop Special edition laptop windows 7 64 bit which is connected to my Emerson 32" Flatscreen TV,
The Picture is working perfectly fine, but there is no audio being tranferred, nor is there a device in the sound devices listed as "Hdmi"
I checked both the realtek and the other device for driver updates and both were up to date.
Anything else I can provide, please let me know.
His Majesty,
Fwish

Hello @Lord_Fwish,
Welcome to the HP Forums, I hope you enjoy your experience!
I have read your post on how there is no sound coming from your HDMI TV connecting to your notebook computer, and I would be happy to assist you in this matter!
To correct this issue, I recommend following this document on Resolving HDMI Display and Sound Issues (Windows 7 and Vista). This should help to correctly produce sound from your HDMI connected TV from your computer.
For further assistance, I will need to know:
The Product and Model Number of your notebook computer.
The version of Windows you have installed on your computer.
If your computer has completed all of its important Windows Updates.
If you have updated your HP drivers using the HP Support Assistant.
If this is an on-going, or recent issue.
Please re-post with the results of your troubleshooting, as well as the requested information above. I look forward to your reply!
Regards
MechPilot
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks” for helping!

My Iphone 4 will not work with MiFI

>> Duplicate post removed to comply with Verizon Wireless Terms of Service. See My Iphone 4 will not work with MiFI <<
Message was edited by: Verizon Moderator

I wasn't trying to access the internet. I was trying to back up I cloud. It said it would back up when connected to Wi-Fi. Also it will not down load software updates.

I am running an Apple imac G-5 with OS 10.5.8. I am getting the message that my version of Safari is no longer working. I downloaded a newer version of Safari and I got the message that it would not work with my OS 10.5.8. Does any one have a suggest

I am running an Apple imac G-5 with OS 10.5.8. Processor: 2 GHz. Memory: 2 GB DDR SDRAM. I am getting the message that my version of Safari is no longer working. I downloaded a newer version of Safari and I got the message that it would not work with my OS 10.5.8. Does any one have a suggest

Your post somehow found its way to a little-viewed forum for an obsolete Apple productivity program. I have asked the Hosts to move you to a more active and appropriate forum for your product.

Product key will not work with this edition of Windows 7

I received a product key for Windows 7 Professional N whilst I was at University via Dreamspark. I'm building a new computer and when it's come to inputting the product key, it comes up saying Product key will not work with this edition of Windows 7.
The version I installed was Windows 7 Professional using an iso and a USB. I rang the phone activation number and when I got through to a representative, I gave him the product key and he said it is valid and should be working. He transferred me to technical
services but instead I got cut off.
At this point I'm really not sure what the issue is, the key was for Windows 7 Professional N, I installed Windows 7 Professional and customer support confirmed it as a valid key. Am I missing something?

Post your issue to the Windows 7 Genuine Issues forum. Here are the instructions on how to produce a diagnostic:
MGA
Diagnostic Report:
To properly analyze and solve problems with Activation and Validation, we need to see a full copy of the diagnostic report produced by the MGADiag tool (download and save to desktop -http://go.microsoft.com/fwlink/?linkid=52012 )
Once downloaded, run the tool.
Click on the Continue button, after a short time, the Continue button will change to a Copy button.
Click on the Copy button in the tool (ignore any error messages at this point), and then paste (using either r-click/Paste, or Ctrl+V ) into your post.
One
Issue Per Thread:
Most Activation and Validation issues look the same, on the surface, but can have many different causes and fixes. This is why we ask for a diagnostic report and this is also why we ask that you create your own thread for your issue (in other words,
don't post your issue in another person's thread).
It just becomes too complicated to try to troubleshoot multiple different issues in the same thread.
New
to the Forums?
Instructions
by Kamin of Ressik
Wanikiya and Dyami--Team Zigzag

New iSync 2.2 still not working with Nokia 6230

I was very pleased to see iSync 2.2 come out yesterday and have support for the series 40 phones - however after Installing 10.4.6 on my new MacBook Pro, and opening iSync, the phone is found by Add Device, but when I go to add it I get the message:
"Your phone, 'xxxx' does not work with this version of iSync.
To enable this phone to work with iSync, contact the phone’s manufacturer or your service provider to update the firmware on your phone. For more information, visit the iSync Support website."
The picture comes up but even if I drag the phone icon to the iSync window I can not sync it - 'Turn on Device Synchronization' will not stay ticked and clicking on Sync ends in a window saying it can't sync until I add a device to iSync.
The Phone is properly paired with the computer through Bluetooth Device Setup. (Address Book works with it just fine, as does file browsing)
Has anyone been able to get their series 40 or more specifically 6230 phones working with iSync 2.2?
Many thanks
Mark Burton

Same error message here.
I upgraded the phone's firmware from 4.44 to 5.50 this morning and IT WORKS great with iSync 2.2!!!!!
Thank you Apple.
Vangelis
I was very pleased to see iSync 2.2 come out
yesterday and have support for the series 40 phones -
however after Installing 10.4.6 on my new MacBook
Pro, and opening iSync, the phone is found by Add
Device, but when I go to add it I get the message:
"Your phone, 'xxxx' does not work with this version
of iSync.
To enable this phone to work with iSync, contact the
phone’s manufacturer or your service provider to
update the firmware on your phone. For more
information, visit the iSync Support website."
The picture comes up but even if I drag the phone
icon to the iSync window I can not sync it - 'Turn on
Device Synchronization' will not stay ticked and
clicking on Sync ends in a window saying it can't
sync until I add a device to iSync.
The Phone is properly paired with the computer
through Bluetooth Device Setup. (Address Book works
with it just fine, as does file browsing)
Has anyone been able to get their series 40 or more
specifically 6230 phones working with iSync 2.2?
Many thanks
Mark Burton

Recovery did not work with new hard drive

The original Toshiba HD(250G, sata1) of my laptop( ) crashed.
I bought new one (320G, sata 2, Western digit )
The problem is that, when I tried to use the recovery CD that I used to use it with old HD before, it did not work with this new HD well!?
After cd1 and cd2 finish installing it ask to take it out then restart, I do so, but when it comes to setup setting of windows.
An error message come out says " Windows Setup could not configure Windows on this computer’s hardware”
It restart and says again " Windows could not complete the installation. To install Windows on theis compuiter, restart the installation."
I have been trying to solve this a lot, but no way
I tried what in this link, but it drive me with another problem http://answers.microsoft.com/en-us/windows/forum/windows_7-windows_install/windows-could-not-complet...
I hope that I get the right thing to do, from ur forum by this post.
Thanks a lot

Did you folks search here for "advanced format drive"? People have had numerous weird problems with the new advanced format hard drives in older Toshibas. I can't look up all the threads for you. But here is one:
http://forums.toshiba.com/t5/System-Recovery-and-Recovery/Recovery-won-t-work-on-new-upgraded-hardri...

Huawei e180 not working with Lion!!... working fine on Windows PC's but not on new macbook pro. new user to apple

Any suggestions on why mobile broadband dongle will not work with 10.7. Mac see dongle, opens folder, but returns error message when try to launch.. NEW USER TO MAC

This thread is a couple of years old but it may answer your question?
https://discussions.apple.com/message/8978867#8978867

Flash player does not work with new ICS Android 4.0.4 OS. Has this problem been addressed?

Flash player does not work with new ICS Android 4.0.4 OS. Has this problem been addressed? I am using Firefox Beta for android and I also tried just Firefox.

Please check the Play Store app for any Flash updates and install them if present.

Home sharing does not work with new mountain lion update.

home sharing does not work with new mountain lion update. Does anyone else have the same issue. Updated all computers in my home, deauthorized and reauthorized each computer. turn off home sharing and turned it back on. don't know what else to do..please help...

Our Apple TVs continue to lose connection ever since installing Mountain Lion on the host computer. The only thing that fixes them is to quit and relaunch iTunes, which only works unti the ATV goes to sleep. If a movie is paused for more than a few minutes and the ATV goes to sleep, pressing play again on the remote is greeted with "There are no movies on this computer" or "Turn on Home Sharing."
If we stop a video on one ATV and attempt to resume it in another room, the error begins again. The other ATV can't connect until iTunes is relaunched.
My guess is that it has something to do with the new [annoying] security settings. But I still haven't found a fix other than restarting iTunes everytime we want to watch something from our downloads. Fail.

I had a repair done on my MacBook Pro and had to have a new hard drive installed. The Apple Auth Repair Shop then updated the OS from 10.6.8 to 10.7.5. Now my iPhoto v 9.2.3 will not open and it sounds like it will not work with this OS. Can you plea

I had a repair done on my MacBook Pro and had to have a new hard drive installed. The Apple Auth Repair Shop then updated the OS from 10.6.8 to 10.7.5. Now my iPhoto v 9.2.3 will not open and it sounds like it will not work with this OS. Can you please advise?

You may need many other updates to retain compatibility with Lion. I suggest you reinstall Snow Leopard. Unfortunately, you will need to erase the drive first. Be sure to backup your data if you haven't done so already.
Clean Install of Snow Leopard
Be sure to make a backup first because the following procedure will erase
the drive and everything on it.
     1. Boot the computer using the Snow Leopard Installer Disc or the Disc 1 that came
         with your computer. Insert the disc into the optical drive and restart the computer.
         After the chime press and hold down the "C" key. Release the key when you see
         a small spinning gear appear below the dark gray Apple logo.
     2. After the installer loads select your language and click on the Continue
         button. When the menu bar appears select Disk Utility from the Utilities menu.
         After DU loads select the hard drive entry from the left side list (mfgr.'s ID and drive
         size.) Click on the Partition tab in the DU main window. Set the number of
         partitions to one (1) from the Partitions drop down menu, click on Options button
         and select GUID, click on OK, then set the format type to MacOS Extended
         (Journaled, if supported), then click on the Apply button.
     3. When the formatting has completed quit DU and return to the installer. Proceed
         with the OS X installation and follow the directions included with the installer.
     4. When the installation has completed your computer will Restart into the Setup
         Assistant. After you finish Setup Assistant will complete the installation after which
         you will be running a fresh install of OS X. You can now begin the update process
         by opening Software Update and installing all recommended updates to bring your
         installation current.
Download and install Mac OS X 10.6.8 Update Combo v1.1.

I bought the Keynote app for my MacBook, but when I open the application and try to install it, I get an error message saying that the application will not work with my MacBook. What gives? And, can I please request a refund? ($19.99 = a week's groceries)

I bought the Keynote app for my MacBook, but when I open the application and try to install it, I get an error message saying that the application will not work with my MacBook. What gives? And, can I please request a refund? ($19.99 = a week's groceries).
Thank you for your help! - I did try looking for all available specs about Keynote on the Apple iTunes website, and found nothing that could help me. HELP!

1
Close all iWork applications
2
Uninstall Keynote; this must be done with an application remover tool to delete the installation properly. Appcleaner is known to work correctly for this purpose, it is free and can be downloaded from here: Appcleaner Download
3
empty the trash
4
shutdown the Mac and restart. After the start up chime, hold down the shift key until the apple logo appears
let the Mac complete the start up procedure completely, it will take longer than usual as the hard drive is being repaired
5
Reinstall Keynote by logging into the Mac App Store using download / install

Edit as new not working with draft messages?

Similar Messages

Maybe you are looking for