Edit BAM Configuration

Hi,
I need to change the port BAM runs on, e.g. from Port 80 to 86. I have changed the IIS port to 86, however I can't view the BAM console.
Is this because I need to edit a BAM config file? If so which one?
Thanks,
James

It sounds like you followed directions and have everything working except you are concerned about some messages during BAM config? Can you start the BAM server and access the BAM page in IE?
Also, your comment about the Start Server being greyed out, it's because, "This button is disabled if you do not have an application open in JDeveloper". If you did have an app open, then try selecting it. The Start Server button will be enabled.
Heidi.

Similar Messages

  • Oracle 10gR3 BAM configuration on Websphere

    We are having issues with 10gR3 BAM configuration on Websphere 6.1.0.19. While running oraclebpmwarehouse.sh, the service does not run. Has anyone done a successful configuration of BAM for Websphere?
    Thanks in advance for any help.

    Here is the relevant message from logfile:(dwupdate-service.log)
    read a packet LOG(WARN) : Will not schedule service [O3CubeBuilderService] since it did not return the next due time. Maybe this service is disabled.
    DEBUG | wrapper | 2009/03/06 13:55:36 | Got a log message from JVM: Will not schedule service [O3CubeBuilderService] since it did not return the next due time. Maybe this service is disabled.
    WARN | jvm 1 | 2009/03/06 13:55:36 | Will not schedule service [O3CubeBuilderService] since it did not return the next due time. Maybe this service is disabled.
    DEBUG | wrapperp | 2009/03/06 13:55:36 | read a packet LOG(DEBUG) : Scheduling item [BAMUpdaterRunnerService] for time [2009-03-06 13:55:35.988000-06:00]
    DEBUG | wrapper | 2009/03/06 13:55:36 | Got a log message from JVM: Scheduling item [BAMUpdaterRunnerService] for time [2009-03-06 13:55:35.988000-06:00]
    DEBUG | jvm 1 | 2009/03/06 13:55:36 | Scheduling item [BAMUpdaterRunnerService] for time [2009-03-06 13:55:35.988000-06:00]
    DEBUG | wrapperp | 2009/03/06 13:55:36 | read a packet LOG(INFO) : Running item [BAMUpdaterRunnerService]
    DEBUG | wrapper | 2009/03/06 13:55:36 | Got a log message from JVM: Running item [BAMUpdaterRunnerService]
    INFO | jvm 1 | 2009/03/06 13:55:36 | Running item [BAMUpdaterRunnerService]
    DEBUG | wrapper | 2009/03/06 13:55:36 | Sending stop signal to JVM
    DEBUG | wrapperp | 2009/03/06 13:55:36 | send a packet STOP : NULL
    INFO | jvm 1 | 2009/03/06 13:55:36 | Mar 6, 2009 1:55:36 PM com.ibm.ws.naming.java.javaURLContextFactory
    INFO | jvm 1 | 2009/03/06 13:55:36 | SEVERE: javaAccessorNotSet
    INFO | jvm 1 | 2009/03/06 13:55:36 | Send a packet LOG(INFO) : Service execution [BAMUpdaterRunnerService] returned code [1]
    INFO | jvm 1 | 2009/03/06 13:55:36 | Send a packet LOG(DEBUG) : Scheduling item [BAMUpdaterRunnerService] for time [2009-03-06 14:05:35.988000-06:00]
    INFO | jvm 1 | 2009/03/06 13:55:36 | Thread, Wrapper-Connection, handling the shutdown process.
    INFO | jvm 1 | 2009/03/06 13:55:36 | calling listener.stop()
    INFO | jvm 1 | 2009/03/06 13:55:36 | WrapperSimpleApp: stop(0)
    INFO | jvm 1 | 2009/03/06 13:55:36 | returned from listener.stop()
    INFO | jvm 1 | 2009/03/06 13:55:36 | Send a packet STOPPED : 0
    DEBUG | wrapperp | 2009/03/06 13:55:36 | read a packet LOG(INFO) : Service execution [BAMUpdaterRunnerService] returned code [1]
    DEBUG | wrapper | 2009/03/06 13:55:36 | Got a log message from JVM: Service execution [BAMUpdaterRunnerService] returned code [1]
    INFO | jvm 1 | 2009/03/06 13:55:36 | Service execution [BAMUpdaterRunnerService] returned code [1]
    DEBUG | wrapperp | 2009/03/06 13:55:36 | read a packet LOG(DEBUG) : Scheduling item [BAMUpdaterRunnerService] for time [2009-03-06 14:05:35.988000-06:00]
    DEBUG | wrapper | 2009/03/06 13:55:36 | Got a log message from JVM: Scheduling item [BAMUpdaterRunnerService] for time [2009-03-06 14:05:35.988000-06:00]
    DEBUG | jvm 1 | 2009/03/06 13:55:36 | Scheduling item [BAMUpdaterRunnerService] for time [2009-03-06 14:05:35.988000-06:00]
    DEBUG | wrapperp | 2009/03/06 13:55:36 | read a packet STOPPED : 0
    DEBUG | wrapper | 2009/03/06 13:55:36 | JVM signalled that it was stopped.
    INFO | jvm 1 | 2009/03/06 13:55:37 | Closing socket.
    DEBUG | wrapperp | 2009/03/06 13:55:37 | socket read no code (closed?).
    INFO | jvm 1 | 2009/03/06 13:55:37 | calling System.exit(0)
    DEBUG | wrapper | 2009/03/06 13:55:37 | JVM process exited with a code of 0, leaving the wrapper exit code set to 0.
    DEBUG | wrapper | 2009/03/06 13:55:37 | JVM exited normally.
    STATUS | wrapper | 2009/03/06 13:55:37 | <-- Wrapper Stopped
    [Bam-dwupdater.log]
    Caused by: javax.naming.ConfigurationException: Name space accessor for the java: name space has not been set. Possible cause is that the user is specifying a java: URL name in a JNDI Context method call but is not running in a J2EE client or server environment.
         at com.ibm.ws.naming.java.javaURLContextFactory.isNameSpaceAccessable(javaURLContextFactory.java:98)
         at com.ibm.ws.naming.urlbase.UrlContextFactory.getObjectInstance(UrlContextFactory.java:73)
    There is some configuration missing to get to the JNDI to look for the BAM database configured as a datasource in Websphere?
    Any thoughts/documentation?

  • RV220W - DHCPv6 Prefix Delegation - Edit the configuration file?

    I am trying to configure this router to obtain an IPv6 address from my ISP who offers a dual stack IPv4/IPv6 DHCPv6 Prefix Delegation service.
    I did a WAN packet capture to see the type of DHCPv6 packets the router sends to the ISP in order to obtain an IPv6 address and I saw that the router is sending DHCPv6 solicitation packets of type IA_NA i.e. for Identity Association for Non-temporary Address. However, most ISPs that offer a dual stack IP4/IPv6 service, they use DHCPv6 Prefix Delegation in which case the router is expected to send DHCPv6 solicitation packets of type IA_PD i.e. for Identity Association for Prefix Delegation.
    I then downloaded its configuration file and saw the following:
    dhcpv6c = {}
    dhcpv6c[1] = {}
    dhcpv6c[1]["renewTime"] = "3600"
    dhcpv6c[1]["statelessMode"] = "1"
    dhcpv6c[1]["prefixDelegation"] = "0"
    dhcpv6c[1]["preferredAddress"] = ""
    dhcpv6c[1]["LogicalIfName"] = "WAN1"
    dhcpv6c[1]["requestPreferredAddress"] = "0"
    dhcpv6c[1]["requestDNSSearchList"] = "0"
    dhcpv6c[1]["requestPreferredPrefix"] = "0"
    dhcpv6c[1]["preferredAddressPrefixLength"] = "0"
    dhcpv6c[1]["requestDNS"] = "1"
    dhcpv6c[1]["sendRapidCommit"] = "0"
    dhcpv6c[1]["isEnabled"] = "1"
    dhcpv6c[1]["preferredPrefix"] = ""
    dhcpv6c[1]["_ROWID_"] = "1"
    dhcpv6c[1]["preferredPrefixPrefixLength"] = "0"
    So, the option for the DHCPv6 client to perform a prefixDelegation request is disabled. Does that mean that if I set this flag to "1" it is going to work? Well, I edited the configuration file and changed this flag but the router refuses to load it! It complains about the file being changed. How does it know that? Is it computing some type of checksum? Does anyone know how can I manually edit this flag and update the router's configuration?

    I can't help you because our ISP doesn't support native ipv6.  I suggest you call Cisco Small Business technical support.  All you need is your serial number and your Cisco username to get support.  Tori is awesome to work with.

  • Error while editing resource configuration

    When I am trying to edit any resource configuration under the resource tab I am getting below erro.
    Does anyone has any idea what could be wrong?
    com.waveset.exception.ItemNotFound: Item AdminGroup:null(id=#ID#11D1DEF534EA1BE0:72D873:1069424B798:4802) was not found.
    Thanks
    Kapil

    Got it,
    I had exported one user from other IDM environment and imported into the environment where I was getting this error. That user was having some admin groups assigned which were not present in the IDM env.
    I just removed all the admingroups from that user entry and imported inot the system back.

  • CCMS Alert Monitor (edit monitor-configuration.xml. ?)

    Hi Friends
    I'm trying to change the default polling time for the CCMS Alert Monitor, 5 minutes instead of 30 minutes.
    In http://help.sap.com/saphelp_nwpi71/helpdata/en/e5/5d1741b393f26fe10000000a1550b0/content.htm you can read:
    Accuracy
    The default polling period for the monitor is 30 minutes. If you want to have shorter polling periods, you can change them in the SAP NetWeaver Administrator as follows:
    1. Choose Availability and Performance Management ® Resource Monitoring ® Java System Reports (alias: /nwa/java-sys-reports).
    2. Select an arbitrary Number of errors entry in the monitoring tree of the Adapter Engine (leaf node).
    3. Choose Configuration in the right-hand pane.
    4. Choose Edit in the dialog box that appears.
    5. Change the polling period to 5 minutes, for instance.
    6. Choose Save and wait until saving is finished (be patient, since this may take a while).
    7. Choose Configuration Management ® Infrastructure Management ® Java Configuration Browser.
    8. Choose apps ® sap.com ® com.sap.aii.af.app ® Monitoring Configurator ® monitor-configuration.xml.
    9. In the xml file, change the polled-by-template period to the same value as above, for example, 5 minutes.
    10. Save the modified xml file.
    11. Choose Operations Management ® Infrastructure Management ® Start & Stop ® Java EE Services to restart the Monitoring service to apply the changes.
    But in step 9, the xml file I've found in my PI 7.1 (SP6) is this:
    <monitor-configuration>
    <monitor-semantics />
    <monitor-tree />
    </monitor-configuration>
    Also, there is no way to modify that file, you can only display it or download it.
    can anyone tell me how to edit the file.
    regards
    raja

    Hi Raja,
    This is the same as doing the following:
    You can locate the monitor-configuration.xml file in the SDA com.sap.aii.af.app.sda (inside META-INF folder). You can find this SDA in the install directory of PI installation. In this XML file please locate and edit the following tag:
    <template-info template-name="SAP_XIJ2EE_RCRDS">
                            <polled-by-template period="30" unit="MINUTE">
                                <generating-resource
                                    name="com.sap.aii.utilxi.rtcheck.mx.standard.XIJ2EEComponentMBean" type="APPLICATION"/>
                                <template-attribute-mapping>
                                    <invoked-resource-method name="getMonitoringRecords"/>
                                </template-attribute-mapping>
                            </polled-by-template>
                        </template-info>
    Change the above to the following *************
    <template-info template-name="SAP_XIJ2EE_RCRDS">
                            <polled-by-template period="5" unit="MINUTE">
                                <generating-resource
                                    name="com.sap.aii.utilxi.rtcheck.mx.standard.XIJ2EEComponentMBean" type="APPLICATION"/>
                                <template-attribute-mapping>
                                    <invoked-resource-method name="getMonitoringRecords"/>
                                </template-attribute-mapping>
                            </polled-by-template>
                        </template-info>
    The main change is the polled-by-template value from 30 mins to 5 mins as per your req ******
    Construct back the SDA (you can search SDN for that) with this edited XML and then redeploy this SDA with the help of JSPM tool.
    This will re-start the PI Server for the changes to come into effect.
    I hope this helps.
    PS: You can consult your BASIS consultant to locate this sda and re-deploy it on PI Server.
    Regards, Gaurav.

  • Can't edit view configuration in Z-component

    Hi experts,
    i have a problem with editing a view with the configuration tool in the development workbench (bsp_wd_cmpwb).
    I created an own Z-component, opened it with an enhancement set (there is no way to open a component without enhancement set in our system? It always wants to have one provided), added a view, and now i can't configure it - the and (-)-buttons for adding fields are disabled.
    Looking forward to you answers!
    Thanks in advance and best regards.

    In bsp_wd_cmpwb, besides the option to input the Component name, you have an icon. Clicking that icon would enable/disable the option to create the enhancement set. Try it.
    Once you create view, in 'view configuration' you have the edit button. Once you click it, the + and - options get enables. try it.

  • Windows 2003 Standard Edition (Cluster Configuration Storage page)

    I am trying to install RAC R2 on windows Server 2003 (Standard Edition). I am using FireWire 800 SIIG to connect to Maxtor OneTouch III External HDD.
    When installing cluster Services, i do not see the Cluster Storage Devices. When i go to Computer Management, i see all the partitions of the raw device.
    One "Cluster Configuration Storage" page, the Available Disks show no partitions.
    Oracle installtion documentation says "On the Cluster Configuration Storage page, identify the disks that you want to use for the Oracle Clusterware files and, optionally, Oracle Cluster File System (OCFS) storage. Highlight each of these disks one at a time and click Edit to open the Specify Disk Configuration page where you define the details for the selected disk"
    In my case, i do not see any disks. What am i missing?
    Any Thoughts. Please advise
    Thanks
    -Prasad
    Message was edited by:
    pinjam

    You have a more fundamental problem, Firewire disks will not work for RAC on Windows. The storage needs to be shared, Firewire disks can't be shared on Windows. On Linux, Oracle took the open source firewire driver and modified it to allow more than one host to connect. On Windows the driver is closed source so they can't do that.
    I presume you are wanting to try-out RAC on Windows, If so another solution may be to download one of the many iSCSI Servers that are available. Microsoft ship an iSCSI Initiator for Windows, this allows you to share a 'block device' which is what RAC needs - then you can choose your RAC Database storage method of choice, ASM, OCFS, RAW. I prefer ASM

  • BAM Configuration

    Hi,
    I am very new to this SOA suite. I have successfully installed BAM with SOA suite 11.1.1.3 with WLS 10.3.3 in Linux and could see my bam managed server and soa managed server in WLS console and also access my BAM console ..
    Can anyone pls point me to a document or link to understand how can I configure BAM with my other components like BPEL, OSB, HW, BR etc ... and what are the possible configuration I can do within BAM and other SOA suite components.
    In short how can I BEST use or utiliize BAM with other SOA suite components :), please help me understanding this or send me any links or doc to configure ...

    I'm not sure where you could find any tutorials or examples and hopefully someone can provide these.
    In short, BAM (Business Activity Monitoring) is bundled as part of the overall SOA Suite 11g offering. After contructing your SOA Composites, which will be based on your business processes, BAM allows you to monitor these and create front-end applciations/reports which can provide you with real-time information around them e.g. see HOW your business processes are performing and whether there are any obvious hold-ups, or KPI measurement like most popular item ordered.
    You will need to create Data Objects (tables within BAM) Architect, and then create the reports (in Active Studio) and to view them you use Active Viewer - all available through BAM console.
    There are two ways to integrate your SOA Composites with BAM to be able to update and view this information. The BAM Adapter (drag and drop within JDeveloper) can be used to send data to your BAM data objects from your composite. Or, you can use the more loosely coupled approach which is to use Events and then 'publish' these and have BAM 'subscribe' to them. Either approach depends on what your particular requirement is and you'll know when to use either approach as you learn more about them. This is just one common scenario. BAM can also be integrated with OSB and ODI to good use.
    Hope this helps.

  • BAM configuration error

    Hi,
    I am getting the below error while trying to configure BAM on a BizTalk 2013 Azure VM. 
    "Microsoft SQL Server Data Transformation Services (DTS) 2012 with SP1 or higher for BAM Archiving is not installed on the local machine.  Please install Microsoft SQL Server 2012 Integration Services. (Sql2012)
    Could not load file or assembly 'Microsoft.SqlServer.ManagedDTS, Version=11.0.0.0, Culture=neutral, PublicKeyToken=89845dcd8080cc91' or one of its dependencies. The system cannot find the file specified. (Microsoft.BizTalk.Bam.CfgExtHelper)"
    Like some of the posts suggested, I've verified and found that the "Management Tools Basic, Complete" were installed on the SQL server. Please let me know your thoughts.
    Regards,
    Ujjwal
    -Ujjwal

    Find this error and the steps to solution from Sandro's blog post:
    https://sandroaspbiztalkblog.wordpress.com/2011/08/31/biztalk-2010-bam-tools-configuration-error-microsoft-sql-server-data-transformation-services-dts-2008-with-sp1-or-higher-for-bam-archiving-is-not-installed-on-the-local-machine/
    Though this error has been documented for BizTalk 2010, same applies for BizTalk 2013 as well with appropriate SQL server version
    Also forum discuss about this error:
    https://social.msdn.microsoft.com/Forums/en-US/93306666-ef61-4a71-91f7-bbcac8ba161e/bam-install-on-server-2008-64-bit-fails-with-a-microsoftsqlservermanageddts-error?forum=biztalkgeneral
    If this answers your question please mark it accordingly. If this post is helpful, please vote as helpful by clicking the upward arrow mark next to my reply.

  • BAM configuration - Doubts

    Hi Frnds,
    We installed BAM on windows (Enterprise Link and BAM s/w).
    In Net configuration, we used on of our 11i instance as Service Name.
    Now, we are unable to proceed how can we get the database objects (Views) on to this BAM.
    How can we get data from the database and make reports here?
    Pleas help
    Thank You

    I think BAM has strict Oracle DB version requirements. It is not supported on 11g - pl verifry with release notes on supported platform

  • Safe way to edit system configuration files?

    What is a safe way to edit a system configuration file? I mean I did this twice: I edited rc.conf, rebooted and the system failed to boot. Then I had to edit out the typos with a LiveCD.
    Is there like a visudo (that edits /etc/sudoers) for rc.conf, xorg.conf, fstab and so on?
    Thanks!

    Majorix wrote:
    No I am of course editing those files with sudo. But the problem is, gedit won't check the file for possible errors, thus if you too oversee it and try to reboot using those system files, you will fail.
    visudo checks you while you edit, so if you make an error it will warn you in the end.
    I was asking if there was a similar tool for the rest of the configuration files.
    Sorry for not being clear.
    Oh -- a kind of a babysitter, you mean?
    j/k, i screw up config files all the time.
    No, as far as I know there is nothing like that for most files. some do have functionality like that, like I think lilo warns you when you write to lilo.conf and the file has errors. and you can run something like testparm for the smb.conf file, and I think there something similar to check apache config files, etc. but for the standard system config files or arch-specific files like rc.conf, fstab, etc. I don't think there is anything. you just have to be sure not to make any mistakes!

  • Error while doing BAM configuration in JDeveloper

    Hi,
    I tried to create a connection to my local BAM Server in JDev 10.1.3.2.0 and also in 10.1.3.3, but I always failed! Error messages:
    "Server is not set up correctly SOA1"
    I'm running on Windows 2003 and installed BAM according to the Installation Guide (version was Bam with Enterprise Link for windows 10.1.3.3.0).
    I did not get any error while doing the other setups and can access the different BAM tools via the Oracle BAM Start page, but I can't create a connection in JDev. I used the following parameters:
    Host Name: SOA1(system name)
    Port Number: 80
    User Name: Administrator
    Password: <windows domain pwd>
    Domain Name: DOMAINNAME
    Any help would be highly appreciated.
    Regards,
    Shaily

    hi Shaily
    It looks like suggesting a different forum is not needed, because you already tried that ...
    Error while doing BAM connection in jdeveloper
    Error while doing BAM connection in jdeveloper
    Error while doing BAM connection in jdeveloper
    I hope you get some answers.
    success
    Jan Vervecken

  • NTP Server Edition in Configuration

    Hi,
    I need to have this information that if i do some correction in the existing NTP Server that is my DC (only) so is there any impact on the running application on the rest of the servers in the domain.
    request for few suggestions over this.
    Regards, Ravi Kumar

    Hi,
    Based on your description, I understand that you want to correct some NTP server configurations. Please
    refer to following thread and check if can help you.
    Possible
    Impact changing NTP
    If anything I misunderstand or any update, please don't hesiate to to let me know.
    Hope this helps.
    Best regards,
    Justin Gu

  • How can I edit external e-mails accounts configurations I had on Mobile Me mail and now on iCloud?

    how can I edit external e-mails accounts configurations I had on Mobile Me mail and now are
    on iCloud?

    Thanks for the answer, but the external POP accounts I had in my MobileMe are working in my iCloud! I receive all the e-mails that are directed to those POP accounts, in my iCloud e-mail, since I migrated from Mobileme to iCloud. So, iCloud accepts external accounts, but i doesn't allow us to edit new configurations or to send e-mails using Pop Accounts through it. Very weird. Does anybody have a solution?

  • Editing security settings in Dcom Configuration

    Hi
    Is there a way I can edit dcom Configuration objects via powershell
    I have to change an object in:
    Component services->Computers->This computer->Dcom-Configuration->{objectname}
    I haven't found much on this... 
    any help will be severely appreciated!
    Kindest regards, Martin

    DCOMPerm is just for changing permissions (ACLs). The authentication level setting appears to be a simple REG_DWORD value called "AuthenticationLevel" which exists under the class's HKEY_CLASSES_ROOT\AppID\{GUID} key. The data for this
    value corresponds to these
    Authentication Level Constants.
    "Configuration Permissions" appears to just correspond to the registry permissions on the HKEY_CLASSES_ROOT\AppID\{GUID} key for each class.  Those are easier to deal with in PowerShell (which is good, because DcomPerm.exe doesn't cover that
    part.)  For example:
    # Some random GUID from the AppID key on my computer
    $keyPath = 'Registry::HKEY_CLASSES_ROOT\AppID\{EE487F98-D1F7-49DD-965D-BFEBAFACBD66}'
    $acl = Get-Acl -Path $keyPath
    $everyone = New-Object System.Security.Principal.SecurityIdentifier(
    [System.Security.Principal.WellKnownSidType]::WorldSid,
    $null
    $rule = New-Object System.Security.AccessControl.RegistryAccessRule(
    $everyone,
    [System.Security.AccessControl.RegistryRights]::FullControl,
    [System.Security.AccessControl.AccessControlType]::Allow
    $acl.AddAccessRule($rule)
    Set-Acl -AclObject $acl -Path $keyPath

Maybe you are looking for