Edit Build Quality permission not properly restricting access

At the top-most level of the Build security hierarchy, I have only one specific TFS Group that is set to "allow" for the Edit Build Quality permission. Everyone else is set to "Not Set". From my understanding, only those in that one group
should then be able to change the build quality. However, it seems that anyone can actually do so.
Is something not set up right? I'm very familiar with TFS permissions and hierarchical inheritance and everything looks like it should be working as intended, but it's not.
Does anyone have any ideas?
Eric Klaban

Hi Eric,
Thanks for your post.
You changed the Edit build quality = Not set in your Contributors group and other default groups? Or you added the Contributors group and other default groups in a specific group, then set the Edit build quality = Not set in this specific group?
In the first scenario, you needn’t deny the Edit build quality permission in Contributors group and other default groups, just set Edit build quality = Not set in your Contributors group and other default groups, then the users which in Contributors group(or
other default groups) will cannot edit build’s quality, I confirmed this in my TFS 2013 Update 4 environment.
In the second scenario, although you set the Edit build quality = Not set in this specific group, but the Contributors group has the Edit build quality = Allow permission by default, so the users which in Contributors group can edit build’s quality. You
need set Edit build quality = Deny on this specific group to deny this permission for the member of groups.
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Similar Messages

I have installed ACDSee Pro3 and have problem to transfer photofiles from device: I got the message; The item could not be edited because you do not have sufficent access privileges or destination volume is no longer available." What can I do?

I have installed ACDSee Pro3 and have problem to transfer photofiles from device: I got the message; The item could not be edited because you do not have sufficent access privileges or destination volume is no longer available." What can I do?

Ask the ACDSee Pro support personnel.
With iPhoto that message means the library is a referenced library (photo not copied when imported into iPhoto's structure) and the source file is not where it was when first added to the library. I don't know how ACDSee works. Does it have a referenced mode as opposed to copying photos into its structure?
OT

Airport Utility Timed Access Control does not allow/restrict access to wireless clients per the time set.

I have been trying to setup Timed Access Control in Airport Utility and it does not seem to be working correctly.
In Airport Utility from Edit Timed Access Control I Enter a name for my device (iPad/iPhone any device), enter my mac address, set time for Everyday and use default Between 9:00 AM and 5:00 PM, save and then update. When I go to my device iPad iPhone etc. I still have access even when it is after the time set, 5:00PM. If I set no access it will restrict access also I set a time between 2:00 PM and 5:00 PM and access was restricted. It doesnt seem to matter what the device is. I know that the MAC Adress is set correctly. It seems like an issue with the Utility, possibly time miss match or something. Not sure if I am missing something or if this Utility just has flaws. Please Help.

I changed the default to (no access) and set an entry for my test device (an iPad) to "Everyday Between 9am to 5pm. The iPad was still able to gain access to the network.
Something else to note, if I try to edit the time of an entry it gives me an error on my MBP "Invalid value", "The value for “Timed Access Control” is invalid." This happens even if I delete a digit (number or letter in the time field) and replace with the exact same. Not sure if the two are related. I have tried to edit access from my iPad. I don't get any errors but I still don't get the expected results. I called Apple to try and get Tech support but they were not much help. Thanks again.

Build quality differences ?

Are the later models ie 2010 models better built than the earlier models. I just bought a jan2010 8900 and it seems a lot better built than the one I had last year , or is it just me ?

I don't recall any differences however, I've only had one and it's from january 2009. Everything is made in China so build quality is not that great across the entire line of BB's. It's adequate but not exceptional.
1. Please thank those who help you by clicking the "Like" button at the bottom of the post that helped you.
2. If your issue has been solved, please resolve it by marking the post "Solution?" which solved it for you!

The build directory of the test run either does not exist or access permission is required.

i am trying to run automated tests
i follow the steps in the web but when i have 2 issues that does not solve
1. i created console project and add build definition without drop folder and queue builds that success.
2. i created C# unit test and add build definition and run it from VS and it worked and done what i want to do.
3. i built lab with 1 machine and define the controller on this pc ( the machine in the lab is another pc)
4. i created test suite with test cases and from vs 2013 i associated automation nethod that i created in 2.
5. when i try to associate the builds for the test plan i have a PROBLEM(1):
this happened every new build that i try to assign - all the builds appears after refresh and when i press assign to plan button
a pop up shown with error : " The build that you selected for this plan no longer exist " but he chose it in build in use but there no work item under it - the list is empty even that there are 2 tests under this test suite.
and than when i try to run the automated tests i have this PROBLEM(2):
The build directory of the test run either does not exist or access permission is required. and the test failed.
Please Help
Roey

Hi Rory,
Thank you for posting in MSDN forum.
According to the error message:
(1) a pop up shown with error : " The build that you selected for this plan no longer exist "
I tried to create a build definition without the drop folder location for unit test solution from the VS IDE, and then I try to select the Build in use option to add the Available builds, then click this Assign to plan. I found that I get same error message
with yours like the following screen shot.
However, when we try to create a build definition with drop folder location for this same unit test solution and then build successfully in the VS IDE.
After you add the Available builds and then click this Assign to plan in the MTM, it work fine.
Therefore, I assume that the issue is related to that you did not specify a build directory for automated test case. MTM need to know where is the drop location of the build building your tests.
http://stackoverflow.com/questions/20033217/couldnt-run-my-test-using-microsoft-test-manager
In addition, I did some research about the problem 2:"The build directory of the test run either does not exist or access permission is required. and the test failed."
I know that the error message occur in either of the following conditions:
1. The account under which test controller is running does not have read permission on the build directory. (The build directory is same as the drop location of build associated with this test run.)
2. The build directory itself does not exist.
So please refer the following blog to check this issue:
http://blogs.msdn.com/b/aseemb/archive/2009/11/25/error-starting-the-test-run-build-directory-of-the-test-run-is-not-specified-or-does-not-exist.aspx
Therefore, I suggest you can try to specify a drop location for build when you run the automated test from the MTM and then check this issue.
Best Regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Microsoft Windows 7 x64 Home Premium Edition (Build 7600) Dell Inc. Inspiron N7010 iTunes 10.7.0.21 QuickTime not available FairPlay 2.2.19 Apple Application Support 2.2.2 iPod Updater Library 10.0d2 CD Driver 2.2.3.0 CD Driver DLL 2.1.3.1 Apple Mobile De

Microsoft Windows 7 x64 Home Premium Edition (Build 7600)
Dell Inc. Inspiron N7010
iTunes 10.7.0.21
QuickTime not available
FairPlay 2.2.19
Apple Application Support 2.2.2
iPod Updater Library 10.0d2
CD Driver 2.2.3.0
CD Driver DLL 2.1.3.1
Apple Mobile Device 6.0.0.59
Apple Mobile Device Driver not found.
Bonjour 3.0.0.10 (333.10)
Gracenote SDK 1.9.6.502
Gracenote MusicID 1.9.6.115
Gracenote Submit 1.9.6.143
Gracenote DSP 1.9.6.45
iTunes Serial Number 0032B09C094C1B88
Current user is not an administrator.
The current local date and time is 2012-09-26 16:25:35.
iTunes is not running in safe mode.
WebKit accelerated compositing is enabled.
HDCP is supported.
Core Media is supported.
Video Display Information
Intel Corporation, Intel(R) Graphics Media Accelerator HD
**** External Plug-ins Information ****
No external plug-ins installed.
**** Network Connectivity Tests ****
Network Adapter Information
Adapter Name:          {4C5C6911-9B8F-4CAF-BCB3-36495F443DC9}
Description:          Microsoft Virtual WiFi Miniport Adapter #2
IP Address:          0.0.0.0
Subnet Mask:          0.0.0.0
Default Gateway:          0.0.0.0
DHCP Enabled:          Yes
DHCP Server:
Lease Obtained:          Thu Jan 01 07:00:00 1970
Lease Expires:          Thu Jan 01 07:00:00 1970
DNS Servers:
Adapter Name:          {9A01C758-72D3-4F24-8B9C-402D925B9FC5}
Description:          Intel(R) Centrino(R) Advanced-N 6250 AGN
IP Address:          192.168.1.5
Subnet Mask:          255.255.255.0
Default Gateway:          192.168.1.1
DHCP Enabled:          Yes
DHCP Server:          192.168.1.1
Lease Obtained:          Wed Sep 26 15:09:47 2012
Lease Expires:          Sat Sep 29 15:09:47 2012
DNS Servers:          192.168.1.1
Adapter Name:          {B98F7EEA-03A3-4616-B167-E9E4C6A09439}
Description:          Intel(R) Centrino(R) WiMAX 6250
IP Address:          0.0.0.0
Subnet Mask:          0.0.0.0
Default Gateway:          0.0.0.0
DHCP Enabled:          Yes
DHCP Server:
Lease Obtained:          Thu Jan 01 07:00:00 1970
Lease Expires:          Thu Jan 01 07:00:00 1970
DNS Servers:
Adapter Name:          {70E7745B-22AB-41A8-A36B-393DCE93A39A}
Description:          Atheros AR8152 PCI-E Fast Ethernet Controller
IP Address:          192.168.1.4
Subnet Mask:          255.255.255.0
Default Gateway:          192.168.1.1
DHCP Enabled:          Yes
DHCP Server:          192.168.1.1
Lease Obtained:          Wed Sep 26 15:09:33 2012
Lease Expires:          Sat Sep 29 15:09:33 2012
DNS Servers:          192.168.1.1
Active Connection:          LAN Connection
Connected:          Yes
Online:                    Yes
Using Modem:          No
Using LAN:          Yes
Using Proxy:          No
Firewall Information
Windows Firewall is on.
iTunes is NOT enabled in Windows Firewall.
Connection attempt to Apple web site was successful.
Connection attempt to browsing iTunes Store was successful.
Connection attempt to purchasing from iTunes Store was successful.
Connection attempt to iPhone activation server was successful.
Connection attempt to firmware update server was successful.
Connection attempt to Gracenote server was successful.
Last successful iTunes Store access was 2012-09-26 16:17:01.
**** CD/DVD Drive Tests ****
No drivers in LowerFilters.
UpperFilters: GEARAspiWDM (2.2.3.0),
E: HL-DT-ST DVDRWBD CT30N, Rev A100
Drive is empty.
**** Device Connectivity Tests ****
iPodService 10.7.0.21 (x64) is currently running.
iTunesHelper 10.7.0.21 is currently running.
Apple Mobile Device service 3.3.0.0 is currently running.
Universal Serial Bus Controllers:
Intel(R) 5 Series/3400 Series Chipset Family USB Enhanced Host Controller - 3B34. Device is working properly.
Intel(R) 5 Series/3400 Series Chipset Family USB Enhanced Host Controller - 3B3C. Device is working properly.
No FireWire (IEEE 1394) Host Controller found.
**** Device Sync Tests ****
No iPod, iPhone, or iPad found.

i cant access to itunes store
Can you walk us through what happens when you try to connect to the Store, please?

Access control - Restricted access not working

Hi
I have an application I have created an Access Control administration page in. I have set the application mode to 'Restricted access. Only users defined in the access control list are allowed'. I have defined two users one with administrator and one with edit privileges. I have a third workspace user who is not listed on the access control page.
I have added the authorisation scheme to the tabs, pages and page items I require. This appears to work fine if I change the privilege of one of the listed users to 'view' the items disappear and cannot be accessed.
The issue I have is that the workspace user who is not listed can still log into the application, and has the same access as 'view' privilege. My understanding is that the 'Restricted Access' application mode should prevent this user from accessing this application as they are not explicitly listed?
Have I missed some set-up, misunderstood the meaning of 'restricted access' or is it some sort of bug? I am assuming I have missed some set-up somewhere.
PS This is APEX 4.0.2 on 11g
Edited by: tlane on 15/02/2011 19:43

I have set the application up on apex.Oracle.com
http://apex.oracle.com/pls/apex/f?p=48123:101:506666493527664
four users have been defined :
control_admin
control_edit
control_view
control_na
The first 3 are defined on the access control page available on the user_admin tab when you login as control_admin user.
user control_na is not listed but can still access the application.
password for all users is : demo1234
Thanks in advance for all help with this issue.

Lock Box setting does not restrict access

I have a folder that is set to restrict access - write only mode for everyone - so when my nephews visit, they cannot access my personal files. This is a single user/logon computer. A couple of times now when I click on the "locked" folder in Finder, it opens for full access. The contents of the finder window wiggled back and forth several times and the folder opened. I could also access the folder contents from application. When I did a get info, the settings were still for write only. I backed out of the folder to the desk top and then back to the folder and it behaved properly. Program access was also once more restricted.
One perhaps unrelated thing. Just before this happened, when I clicked on any application on the dock, I got the appropriate finder window instead of switching to or launching the application. It too now works normally.
Any ideas?

Permissions repairs apply only to items that leave receipt information, essentially only items installed by Apple's installer. As far as stated features working correctly, the permissions system is designed around the user account concept. If you are trying to use it otherwise, you will be disappointed. The computer can't possibly know who is using it, only what account is trying to access something.
Admin users have more privileges than other user accounts. This is necessary to managing the computer. If you want reliable privacy, you must create a less privileged account for others to use; otherwise they will have the same privileges you do. This is no different from leaving your front door unlocked because you want it to function for your convenience.
Regarding folders with system as owner, none should be in your home directory, nor should you be able to change the owner's permissions to write only, whatever the owner is. You can change the permissions of another user added to the list to write only, or those of a group or others, but the owner must always have read privileges. The Finder should not let you violate this rule.
Likewise, you should not have any folders with just admin, wheel, & everyone entries in the list. Admin & wheel are both groups (indicated by the two-headed silhouette icon) -- groups cannot be the principle owner (indicated by the one-headed silhouette icon). Missing entries indicate no access privileges for that entity & should never apply to the principle owner.
One potential source of confusion is that non-owner users added to the permissions list also appear with the single-headed silhouette (these permissions are controlled by ACL entries, not the main owner/group/others settings) & sometimes the list in Get Info is not in strict owner/group/others sequence. There are also some anomalies associated with accounts migrated from Tiger.
Because of all this, it is best not to trust the Get Info permissions info to give you the full permissions picture. For that, the Terminal is a better tool. You can use the "ls" command with the "-l" option to show expanded preference info, or with the "-l@e" option to show still more, including extended attributes & the ACL. (Note that the "l" character is a lower case ell, not a capital eye or a one.) If necessary, see the Mac OS X Manual Page For ls(1) for more info about how to use the command.

Restrict Access Not working

I have 3 folders - Admin, Private, Public
I have 3 values for Permissions 1=Admin, 2=Private, 3=Public
I have an automatic redirect when a user logins in
ie. a privater user logins in and is redirected to /private/index.php
Which works great, now i placed a restrict access folder behavior to the private folder and only selected 2 for the permission (private access). Now when the private user logins in and is redirected to /private/index.php it says access denied please login.
Why is it not allowing that person to get to that page. Ive checked the /private/index.php page and it says:
//Start Restrict Access To Page
$restrict = new tNG_RestrictAccess($conn_portersonline, "../../");
//Grand Levels: Level
$restrict->addLevel("1");
$restrict->addLevel("2");
$restrict->Execute();
Anybody have any ideas???

Here is my session setting in Php
Session Support enabled
Registered save handlers files user
Directive Local Value Master Value
session.auto_start Off Off
session.bug_compat_42 On On
session.bug_compat_warn On On
session.cache_expire 180 180
session.cache_limiter nocache nocache
session.cookie_domain no value no value
session.cookie_lifetime 0 0
session.cookie_path / /
session.cookie_secure Off Off
session.entropy_file no value no value
session.entropy_length 0 0
session.gc_divisor 100 100
session.gc_maxlifetime 1440 1440
session.gc_probability 1 1
session.name PHPSESSID PHPSESSID
session.referer_check no value no value
session.save_handler files files
session.save_path .\ .\
session.serialize_handler php php
session.use_cookies On On
session.use_only_cookies Off Off
session.use_trans_sid Off Off

User has appropriate permission, still not able to access one of the sharepoint site applications.

Hi,
I have tried all solutions available on internet regarding this problem but none seems to work.
As per one solution I added the user in sharepoint site collection administrator group still no luck!
As per another solution I tried to run “User Profile Service Application Proxy – User Profile to SharePoint Full Synchronization”
“User Profile Service Application Proxy – User Profile to SharePoint Quick Synchronization”
but they dont run for some reason. Both these jobs are scheduled to run everyday but last time they ran was some date in 2011. When I click on Run Now nothing happens.
I deleted all cache, forms password history everything. Added the site in trusted sites and all. No luck!
User also tried to access the site by logging onto another system but still same issue.
This user recently joined alongwith a few more people. All of them are able to access the site except this particular user. So, a web part or unpublished page cant be the reason, right?
This user is only able to access the home page which is say http://<siteurl:1234> application while the site which this user is not able to access is
http://<siteurl:2345>.
I even tried to give access through sharepoint designer but no luck! Please help!
PS: This may not be relevant but still I'm sharing. Earlier I used to add users in manage user profiles - new profile. But now as soon as the user is added into active directory there profile is getting created automatically. This might be happening due to
active directory and user profile sync but the question is how? Because I dont remember configuring this. And it was not configured earlier too.

Hi,
According to your description, my understanding is that only one user cannot access the site even though he has the right permission.
I recommend to verify the things below:
Check the permission of the user in the site to see if the permission is right.
Is http://<siteurl:2345> a new site collection ? Can the user access other pages except the home page in
http://<siteurl:1234>?
Grant needed permission to the user in the web application to see if the issue still occurs.
Delete the user and re-add the user in AD to see if the issue still occurs.
Check the ULS log for detailed error message.
Best regards.
Thanks
Victoria Xia
TechNet Community Support

Restrict Access To Page Not Working with Different Auth Levels

I have just started playing with the idea of using different auth levels to allow different users access to certain pages on my site.
Within my SQL database I have a authlevel table consisting of 3 possible levels (guest, user, admin)
I am using the Dreamweaver "Log in user" to log in users based on username, pass, and auth level and "Restrict access to page" set to allow user levels 'user' and 'admin'.
The problem, however, occurs when trying to log in. No matter what auth level I try I am redirected to my page where users should be redirected if they are not allowed to enter that page.
I have included below my code from my login page and the page where all authorized users (user and admin) should be directed upon entering the restricted area.
Login Page:
<?php require_once('../Connections/hondovfd.php'); ?>
<?php
if (!function_exists("GetSQLValueString")) {
function GetSQLValueString($theValue, $theType, $theDefinedValue = "", $theNotDefinedValue = "")
if (PHP_VERSION < 6) {
    $theValue = get_magic_quotes_gpc() ? stripslashes($theValue) : $theValue;
$theValue = function_exists("mysql_real_escape_string") ? mysql_real_escape_string($theValue) : mysql_escape_string($theValue);
switch ($theType) {
    case "text":
      $theValue = ($theValue != "") ? "'" . $theValue . "'" : "NULL";
      break;
    case "long":
    case "int":
      $theValue = ($theValue != "") ? intval($theValue) : "NULL";
      break;
    case "double":
      $theValue = ($theValue != "") ? doubleval($theValue) : "NULL";
      break;
    case "date":
      $theValue = ($theValue != "") ? "'" . $theValue . "'" : "NULL";
      break;
    case "defined":
      $theValue = ($theValue != "") ? $theDefinedValue : $theNotDefinedValue;
      break;
return $theValue;
?>
<?php
// *** Validate request to login to this site.
if (!isset($_SESSION)) {
session_start();
$loginFormAction = $_SERVER['PHP_SELF'];
if (isset($_GET['accesscheck'])) {
$_SESSION['PrevUrl'] = $_GET['accesscheck'];
if (isset($_POST['username'])) {
$loginUsername=$_POST['username'];
$password=$_POST['password'];
$MM_fldUserAuthorization = "authlevel";
$MM_redirectLoginSuccess = "/membersonly/membersonly.php";
$MM_redirectLoginFailed = "/membersonly/loginfailed.php";
$MM_redirecttoReferrer = false;
mysql_select_db($database_hondovfd, $hondovfd);
$LoginRS__query=sprintf("SELECT username, password, authlevel FROM login WHERE username=%s AND password=%s",
GetSQLValueString($loginUsername, "text"), GetSQLValueString($password, "text"));
$LoginRS = mysql_query($LoginRS__query, $hondovfd) or die(mysql_error());
$loginFoundUser = mysql_num_rows($LoginRS);
if ($loginFoundUser) {
    $loginStrGroup = mysql_result($LoginRS,0,'authlevel');
    //declare two session variables and assign them
    $_SESSION['MM_Username'] = $loginUsername;
    $_SESSION['MM_UserGroup'] = $loginStrGroup;
    if (isset($_SESSION['PrevUrl']) && false) {
      $MM_redirectLoginSuccess = $_SESSION['PrevUrl'];
    header("Location: " . $MM_redirectLoginSuccess );
else {
    header("Location: ". $MM_redirectLoginFailed );
?>
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="http://www.w3.org/1999/xhtml">
<head>
<meta http-equiv="Content-Type" content="text/html; charset=UTF-8" />

<title>Log In</title>

<meta name="description" content="Hondo Fire and Rescue serves the Arroyo Hondo and Canada Village areas of Santa Fe County, NM." />
<meta name="keywords" content="hondo, hondo fire, hondo vfd, hondo fire department, santa fe county fire department, santa fe county, volunteer fire department, hondo volunteer fire department" />
<link href="../stylesheet.css" type="text/css" rel="stylesheet" />

<script src="../SpryAssets/SpryMenuBar.js" type="text/javascript"></script>
<link href="../SpryAssets/SpryMenuBarVertical.css" rel="stylesheet" type="text/css" />
</head>
<body class="thrColLiqHdr">
<div id="container">
<div id="header"></div>
<div id="sidebar1">
<h3>Navigation : </h3>
<ul id="MenuBar1" class="MenuBarVertical">
<li><a href="/index.php">Home</a></li>
<li><a href="/support.php">Support Hondo</a></li>
<li><a class="MenuBarItemSubmenu" href="#">Information Menu</a>
    <ul>
      <li><a href="/people.php">Our People</a></li>
      <li><a href="http://www.google.com/maps/ms?ie=UTF8&hl=en&msa=0&msid=101620713606637979698.00045b6ead4ab4ea70b78&z=11" target="_blank">Response Area</a></li>
      <li><a href="/medical.php">Medical</a></li>
      <li><a href="/apparatus.php">Apparatus</a></li>
      <li><a href="/training.php">Training</a></li>
      <li><a href="/volunteer.php">Volunteer</a></li>
      <li><a href="/statistics.php">Statistics</a></li>
      <li><a href="/patchtrading.php">Patch Trading</a></li>
    </ul>
</li>
<li><a href="/album.php">Photo Gallery</a></li>
<li><a href="/calendar.php">Calendar</a></li>
<li><a href="/news.php">Blog/News</a></li>
<li><a href="/links.php">Links</a></li>
<li><a href="/contact.php">Contact Us</a></li>
</ul>
<br />
<form action="https://www.paypal.com/cgi-bin/webscr" method="post">
<span class="lefttext">
<input type="hidden" name="cmd" value="_s-xclick">
<input type="hidden" name="hosted_button_id" value="8567201">
<input type="image" src="https://www.paypal.com/en_US/i/btn/btn_donate_LG.gif" border="0" name="submit" alt="PayPal - The safer, easier way to pay online!" />
<img alt="" border="0" src="https://www.paypal.com/en_US/i/scr/pixel.gif" width="1" height="1">
</img></input></input>
</span>
</form>
<span class="lefttext"><br />
</span>
<center>
<span class="lefttext"><a href="http://www.facebook.com/pages/Santa-Fe-NM/Hondo-Volunteer-Fire-Department/74284233488" target="_blank" class="lefttext">Hondo VFD on Facebook</a></span>
</center>
</div>
<div id="sidebar2">
    <p><a href="/membersonly/login.php">Log In</a> | <a href="/membersonly/logout.php">Log Out</a></p>
    <p>Call Statistics for <?php
$myFile = "/var/home/hondovfd/hondovfd.org/www/membersonly/month.txt";
$fh = fopen($myFile, 'r');
$theData = fread($fh, filesize($myFile));
fclose($fh);
echo $theData;
?> as of <?php
$myFile = "/var/home/hondovfd/hondovfd.org/www/membersonly/date.txt";
$fh = fopen($myFile, 'r');
$theData = fread($fh, filesize($myFile));
fclose($fh);
echo $theData;
?></p>
<table width="90%" border="0" cellspacing="0" cellpadding="0">
<tr>
    <td width="60%">EMS Calls</td>
    <td width="40%"><?php
$myFile = "/var/home/hondovfd/hondovfd.org/www/membersonly/emscalls.txt";
$fh = fopen($myFile, 'r');
$theData = fread($fh, filesize($myFile));
fclose($fh);
echo $theData;
?></td>
</tr>
<tr>
    <td>Fire Calls</td>
    <td><?php
$myFile = "/var/home/hondovfd/hondovfd.org/www/membersonly/firecalls.txt";
$fh = fopen($myFile, 'r');
$theData = fread($fh, filesize($myFile));
fclose($fh);
echo $theData;
?></td>
</tr>
</table>
<hr />
    <div id="cse" style="width:100%;">Loading</div>
<script src="http://www.google.com/jsapi" type="text/javascript"></script>
<script type="text/javascript">
google.load('search', '1');
google.setOnLoadCallback(function(){
    new google.search.CustomSearchControl().draw('cse');
}, true);
</script>
     
</div>

<div id="mainContent">
<div class="top"></div><div class="wrap">
<table width="100%" border="0" cellspacing="0" cellpadding="0">
<tr>
    <td height="47" class="h2">Members Only Login</td>
</tr>
<tr>
    <td><form ACTION="<?php echo $loginFormAction; ?>" id="login" name="login" method="POST">
    <table width="40%" border="0" cellspacing="0" cellpadding="0">
<tr>
    <td width="31%">Username:</td>
    <td width="69%"><input name="username" type="text" /></td>
</tr>
<tr>
    <td>Password</td>
    <td><input name="password" type="password" /></td>
</tr>
</table>
<input name="Submit" type="submit" />
    </form></td>
</tr>
</table>

</div>
<div class="bottom"></div>
</div>
      <br class="clearfloat" />
<div id="footer">
    <p align="center">© Copyright 2009 Hondo Volunteer Fire Department | <a href="mailto:[email protected]">Contact Us</a><a href="http://www.legalhelpers.com/chapter-13-bankruptcy/chapter13.html"></a><br />Hosting provided by <a href="http://studiox.com/" target="_blank">Studio X</a></p>
</div>
</div>
<script type="text/javascript">

</script>
<?php include_once("/var/home/hondovfd/hondovfd.org/www/analyticstracking.php"); ?>
</body>
</html>
Other Page:
<?php
if (!isset($_SESSION)) {
session_start();
$MM_authorizedUsers = "user,admin";
$MM_donotCheckaccess = "false";
// *** Restrict Access To Page: Grant or deny access to this page
function isAuthorized($strUsers, $strGroups, $UserName, $UserGroup) {
// For security, start by assuming the visitor is NOT authorized.
$isValid = False;
// When a visitor has logged into this site, the Session variable MM_Username set equal to their username.
// Therefore, we know that a user is NOT logged in if that Session variable is blank.
if (!empty($UserName)) {
    // Besides being logged in, you may restrict access to only certain users based on an ID established when they login.
    // Parse the strings into arrays.
    $arrUsers = Explode(",", $strUsers);
    $arrGroups = Explode(",", $strGroups);
    if (in_array($UserName, $arrUsers)) {
      $isValid = true;
    // Or, you may restrict access to only certain users based on their username.
    if (in_array($UserGroup, $arrGroups)) {
      $isValid = true;
    if (($strUsers == "") && false) {
      $isValid = true;
return $isValid;
$MM_restrictGoTo = "/membersonly/loginfailed.php";
if (!((isset($_SESSION['MM_Username'])) && (isAuthorized("",$MM_authorizedUsers, $_SESSION['MM_Username'], $_SESSION['MM_UserGroup'])))) {
$MM_qsChar = "?";
$MM_referrer = $_SERVER['PHP_SELF'];
if (strpos($MM_restrictGoTo, "?")) $MM_qsChar = "&";
if (isset($QUERY_STRING) && strlen($QUERY_STRING) > 0)
$MM_referrer .= "?" . $QUERY_STRING;
$MM_restrictGoTo = $MM_restrictGoTo. $MM_qsChar . "accesscheck=" . urlencode($MM_referrer);
header("Location: ". $MM_restrictGoTo);
exit;
?>
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="http://www.w3.org/1999/xhtml">
<head>
<meta http-equiv="Content-Type" content="text/html; charset=UTF-8" />

<title>Members Only Area</title>

<meta name="description" content="Hondo Fire and Rescue serves the Arroyo Hondo and Canada Village areas of Santa Fe County, NM." />
<meta name="keywords" content="hondo, hondo fire, hondo vfd, hondo fire department, santa fe county fire department, santa fe county, volunteer fire department, hondo volunteer fire department" />
<link href="../stylesheet.css" type="text/css" rel="stylesheet" />

<script src="../SpryAssets/SpryMenuBar.js" type="text/javascript"></script>
<link href="../SpryAssets/SpryMenuBarVertical.css" rel="stylesheet" type="text/css" />
</head>
<body class="thrColLiqHdr">
<div id="container">
<div id="header"></div>
<div id="sidebar1">
<h3>Navigation : </h3>
<ul id="MenuBar1" class="MenuBarVertical">
<li><a href="/index.php">Home</a></li>
<li><a href="/support.php">Support Hondo</a></li>
<li><a class="MenuBarItemSubmenu" href="#">Information Menu</a>
    <ul>
      <li><a href="/people.php">Our People</a></li>
      <li><a href="http://www.google.com/maps/ms?ie=UTF8&hl=en&msa=0&msid=101620713606637979698.00045b6ead4ab4ea70b78&z=11" target="_blank">Response Area</a></li>
      <li><a href="/medical.php">Medical</a></li>
      <li><a href="/apparatus.php">Apparatus</a></li>
      <li><a href="/training.php">Training</a></li>
      <li><a href="/volunteer.php">Volunteer</a></li>
      <li><a href="/statistics.php">Statistics</a></li>
      <li><a href="/patchtrading.php">Patch Trading</a></li>
    </ul>
</li>
<li><a href="/album.php">Photo Gallery</a></li>
<li><a href="/calendar.php">Calendar</a></li>
<li><a href="/news.php">Blog/News</a></li>
<li><a href="/links.php">Links</a></li>
<li><a href="/contact.php">Contact Us</a></li>
</ul>
<br />
<form action="https://www.paypal.com/cgi-bin/webscr" method="post">
<span class="lefttext">
<input type="hidden" name="cmd" value="_s-xclick">
<input type="hidden" name="hosted_button_id" value="8567201">
<input type="image" src="https://www.paypal.com/en_US/i/btn/btn_donate_LG.gif" border="0" name="submit" alt="PayPal - The safer, easier way to pay online!" />
<img alt="" border="0" src="https://www.paypal.com/en_US/i/scr/pixel.gif" width="1" height="1">
</img></input></input>
</span>
</form>
<span class="lefttext"><br />
</span>
<center>
<span class="lefttext"><a href="http://www.facebook.com/pages/Santa-Fe-NM/Hondo-Volunteer-Fire-Department/74284233488" target="_blank" class="lefttext">Hondo VFD on Facebook</a></span>
</center>
</div>
<div id="sidebar2">
    <p><a href="/membersonly/login.php">Log In</a> | <a href="/membersonly/logout.php">Log Out</a></p>
    <p>Call Statistics for <?php
$myFile = "/var/home/hondovfd/hondovfd.org/www/membersonly/month.txt";
$fh = fopen($myFile, 'r');
$theData = fread($fh, filesize($myFile));
fclose($fh);
echo $theData;
?> as of <?php
$myFile = "/var/home/hondovfd/hondovfd.org/www/membersonly/date.txt";
$fh = fopen($myFile, 'r');
$theData = fread($fh, filesize($myFile));
fclose($fh);
echo $theData;
?></p>
<table width="90%" border="0" cellspacing="0" cellpadding="0">
<tr>
    <td width="60%">EMS Calls</td>
    <td width="40%"><?php
$myFile = "/var/home/hondovfd/hondovfd.org/www/membersonly/emscalls.txt";
$fh = fopen($myFile, 'r');
$theData = fread($fh, filesize($myFile));
fclose($fh);
echo $theData;
?></td>
</tr>
<tr>
    <td>Fire Calls</td>
    <td><?php
$myFile = "/var/home/hondovfd/hondovfd.org/www/membersonly/firecalls.txt";
$fh = fopen($myFile, 'r');
$theData = fread($fh, filesize($myFile));
fclose($fh);
echo $theData;
?></td>
</tr>
</table>
<hr />
    <div id="cse" style="width:100%;">Loading</div>
<script src="http://www.google.com/jsapi" type="text/javascript"></script>
<script type="text/javascript">
google.load('search', '1');
google.setOnLoadCallback(function(){
    new google.search.CustomSearchControl().draw('cse');
}, true);
</script>
     
</div>

<div id="mainContent">
<div class="top"></div><div class="wrap">
    <table width="100%" border="0" cellspacing="0" cellpadding="0">
<tr>
    <td height="47" class="h2">Members Only Area</td>
</tr>
<tr>
    <td><p><a href="/membersonly/documents.php">Useful Documents</a></p>
      <p><a href="/membersonly/IncidentCount01_08.pdf">Current Call Statistics</a> as of 9/3/09</p>
      </td>
</tr>
</table>
<script type="text/javascript">

</script>
</div>
<div class="bottom"></div>
</div>
      <br class="clearfloat" />
<div id="footer">
    <p align="center">© Copyright 2009 Hondo Volunteer Fire Department | <a href="mailto:[email protected]">Contact Us</a><a href="http://www.legalhelpers.com/chapter-13-bankruptcy/chapter13.html"></a><br />Hosting provided by <a href="http://studiox.com/" target="_blank">Studio X</a></p>
</div>
</div>
<script type="text/javascript">

</script>
<?php include_once("/var/home/hondovfd/hondovfd.org/www/analyticstracking.php"); ?>
</body>
</html>

you don't need all that bloat. set a session during login of some kind of uniquely identifying id. i.e.
$_SESSION['id'] = $row_rs['id'];
then on the pages you need to protect, check it like this....
<?php
session_start();
if (!(isset($_SESSION['id']) && $_SESSION['id'] != '')) {
die(header("Location: http://www.notinprotectedareas.com")); }
?>
you can use an include file i.e.
<?php require_once('login_check.php'); ?>
where file is name login_check.php to make your auth controls clean on your protected pages.

ITunes music files cannot be edited, and new music files imported. The messages says I do not have enough access privileges even though I am the administrator of the system.

Since installing the latest version of iTunes all my music files cannot be edited, and I cannot import new music files into iTunes. The messages says I do not have enough access privileges even though I am the administrator of the system. If anyone can help me sort this out I would be really grateful. I have checked the read and write privileges for all the iTunes folders and it all seems in order so I can't understand it.
In general, I am getting really frustrated with Apple. They seem to be getting ever more controlling in their approach to their consumers. I need to edit music file information as I am a dj. And why can't I import music, unless I buy it from iTunes? Most of all, why can't I use the devices I paid a lot of money for in the way I want to use them, and not be forced to coerced to use apple's fee paying services (iCloud, iTunes).
I have used apple computers since the early 1990's, but in the last year I have gotten rid of my iPhone and my iPad and replaced them with Android devices. Much better and much less control. Perhaps it is time to switch from Apple altogether.

Hi
Read this About Disk Utility's Repair Disk Permissions feature
and OS X Mavericks: If you don’t have the correct permissions to open a file or folder
Does this help?
Jim

Could not save Preferences because the file is locked, you do not have necessary access permissions, or another program is using the file. Use the 'Get Info' command in the Finder to ensure the file is unlocked and you have permission to access the file.

I have this massage every time close ps cc
Could not save Preferences because the file is locked, you do not have necessary access permissions, or another program is using the file. Use the ‘Get Info’ command in the Finder to ensure the file is unlocked and you have permission to access the file. If the problem persists, save the document to a different file or duplicate it in the Finder.

You may get better help in Photoshop General Discussion
The Cloud forum is not about using individual programs
The Cloud forum is about the Cloud as a delivery & install process
If you will start at the Forums Index https://forums.adobe.com/welcome
You will be able to select a forum for the specific Adobe product(s) you use
Click the "down arrow" symbol on the right (where it says All communities) to open the drop down list and scroll
If FINDER means Mac, read below (and try to give more information when asking a question)
Mac 10.9.3 workaround https://forums.adobe.com/thread/1489922
Enable Mac Root User https://forums.adobe.com/thread/1156604
-more Root User http://forums.adobe.com/thread/879931
-and more root user http://forums.adobe.com/thread/940869?tstart=0

Not able to access Site logo from layout and css After removing all the permission from site

Hi Techis,
I have stucked here, actually I have removed permissions from all the users from the site and after sometime I got the mails from client that they are not able to access the Site logo and css in the site.
When I logged from Farm account and checked I can see everything working fine.Also the masterpage and all are checked in
I am not getting whats the exact issue.I stucked here from last one day Please help me to solve this issue.
Thanks Regards,
Simanchal

Hello,
Is it the publishing site? If so then go to site permission and provide permission to "NT AUTHORITY\authenticated users" to "Style Resource Readers" group.
You also need to make sure that "style library" is inheriting permission from parent otherwise you need to give at least read permission to library for all users. To verify this, just open view all site content page-->then click on style library,then
check permission.
Let us know your result
Hemendra:Yesterday is just a memory,Tomorrow we may never see<br/> Please remember to mark the replies as answers if they help and unmark them if they provide no help

TS3694 I get an Error 7 on Microsoft Home Edition 7 telling me iTunes did not properly install

I keep getting an Error 7 on Microsoft Home Edition 7 telling me iTunes did not properly install.

Hmmm. Then try this out buddy:
http://support.apple.com/kb/TS3074

Edit Build Quality permission not properly restricting access

Similar Messages

Maybe you are looking for