Edit Folder link always is visible if Item Level Security is enabled

Hi,
When Item Level Security is enabled in a folder, it show the 'Edit Folder' link, instead if the user is not authenticated.
Does anybody know how to remove this link???
Thanks.

We to have experienced this behavior. Is this a bug?
The Edit Link generated does not allow the user to "edit" any items, but shows the Administration link. This is not a good thing. This makes using Item Level Security very difficult, from the standpoint of User Interface and confusion.
We are looking into creating a portlet to dynamically generate an "Edit Folder" link to replace the current one. However, we have doubts this will work.
Dean
- Solaris
- Portal 3.0.9.8.2
- 8.1.7.3
(Awaiting Release 2!)

Similar Messages

Item level security for custom items in 902

I've created several custom item types and created some items in a page
that enables Item Level Security.
Enabling item level security on any of these items cause
Error 30694: Error in API - update item failed
Steps:
1. Create custom item type
Extended simple text type
added image attribute
2. Create custom item
3. Edit custom item just created
Select Access / Item Level Security
Select Define Item Level Access Privileges
Hit Apply or OK
-> Error 30694: Error in API - update item failed
Same error is using a "Image" item type.
The above steps do not cause an error if using the default types; e.g. Simple Text and Simple URL
Also tried promoting the item type so its shared. No effect.
Is item-level security only for base "simple" item types??? If so then this is a MAJOR restriction.
Any help would be greatly appreciated.
--jason mathews

Hi Jason
I filed a bug on this. See 2529787
I narrowed the problem down to custom item types that have a file or image attribute and only when the item is edited by someone other than the orginial publisher.

The 'Edit folder' link doesn't appear in content area portlet (URGENT)

Hi! I made three content areas, and published them as portlets in a page. However, when I enter the page as an authorized user, I don't see the 'Edit folder' link on any content area portlet. But if I enter to any of the content area pages with the same user, I see the link
Is this a bug? What could be the reason?
Thanks a lot!
Luis

try this...
Edit the page where you added the portlets. Click the edit defaults link next to each of the portlets and scroll down to make sure the show Edit Link checkbox is checked. I don4t see any Edit Link checkbox when I edit the portlet's defaults!!
What should it be?

Repost:Edit Folder link/Portlet Customize link

All,
apologies if this has been asked already.
Need to hide the customize link in Portlet and edit folder link in folder/content area. Better yet, would like to give selective access to these, based on user group (or other acl). I am on 3.0.7. Currently, hiding the header (or banner) is the only way of not showing these links. Do later versions have the same problem ? or has this issue been resolved.
Thanks
Sanjay

I had similar problem in 3.0.9
I agree with Karthic that looks like a caching problem.
In the folder portlet, I enabled the Edit option. If a user originally had the privileges to do edit folder, then the folder shows the Edit option.
If later I remove the privileges so that the user only have view content privileges,
then the Edit option still shows up in the folder portlet and if the user clicks on the "Edit"link, then a message like insufficient privileges error comes up.
FYI i don't use any caching for pages.
Karthic,
have you heard of this problem in 3.0.9?
Tks!

Enabling item level security

Hi,
We are using portal version 3.0.9. We are trying to implement security at the item level and have super-user rights. According to <http://portalstudio.oracle.com/help/sblgrapi.htm>, if you scroll all the way to the bottom it says that "You cannot enable item level security for items in the Portlet Repository content area." I am assuming that this Portlet Repository content area is referring to the Administer->Display Portlet Repository ->Seeded Providers -> Portal Content Area -> Content Areas
The items that we want to secure are currently in the folder called "other providers" but I can also access the items from within the portal repository content areas.
So far I have been specifying access to the page, the category, the folder, and the item, and when I log in as a view only user I still can see things that I shouldn't. Perhaps, it is because it is somehow still in the repository?
I think that I am missing a step somewhere. I have cleared inherit privileges and enable item level security wherever I could find that option while editing. Has anyone successfully added security to even a folder?
Thanks in advance.
Best Regards,
Lindsay

Lindsay,
I'm not sure if this is what you are looking for, but you can secure access to portlets that are shown in the portlet repository
through the Access tab that is available when you "Edit" the portlet entry in the Edit Folder view of the Portlet repository.
[ol]
[li]Go to the portlet repository
[li]Navigate to the appropriate folder
[li]Edit the folder
[li]Click on the Edit link beside the portlet of interest
[li]Click on the Access tab
[li]Turn on access control and specify privileges on the portlet.
[ol]
See if this is what you are looking for, or let me know if I'm off base.

ACL - ILS (Item Level Security) for Content Server & WebCenter Spaces

We're trying to implement Item Level Security (ILS / ACL) for Webcenter spaces. We're following the instructions from the Oracle® Fusion Middleware Administrator's Guide for Oracle WebCenter 11g Release 1 (11.1.1.5.0) http://docs.oracle.com/cd/E15586_01/webcenter.1111/e12405.pdf
After making the configuration changes, we're unable to see the "Security" option from the "File" menu in the Document explorer. Has anyone else implemented this feature and ran into similar issues?
I made the following configuration changes:
UseEntitySecurity=1
SpecialAuthGroups=SecurityGroups (comma separated list with no spaces and the application name is included)
CS: Version:11gR1-11.1.1.5.0
DB: 11.2.0.2.0 ---Oracle Database 11g Enterprise Edition
WebCenter: 11.1.1.4.0 (in a clustered environment)
Also, we're looking at the document properties in webcenter spaces via document explorer and do not see the "security group" or "accounts" metadata fields. We can see the "Content ID" and a whole bunch of fields and do not see "security groups" and "accounts". However, when we log into the content server and look at the folder or file "info" we can clearly see the security group and account values...not sure what is required to make these two fields show up in webcenter spaces.

Hi ,
Do you upload the documents from spaces or from UCM side ?
When you say the security and account field are not displayed , is that when viewing the content or during update ?
When the ACL features are turned off do you see the above fields ?
Thanks
Srinath

How programmatically "enable" the Page to have Item level security

Some body known how do we programmatically "enable" the Page to have
Item level security. - analogous to checking the box in the Page edit mode for "Enable item level security"

Hi, I only know portal.wwsbr_api.enable_ils_for_item.....
You can perform actions on multiple objects simultaneously.
Navigator > Page Groups(TAB) > PageGroup > Page > actions(link)
Click on actions link and in LOV, select "Enable ILS".
Hope this help.

Access Tab not showing for item level security

I have enabled item level security for the portal page I am working on, but the access tab for the items is not showing.
I have come accross exactly the same problem on this forum and the advice was:
Hi try the following :
go to page properties
set the item level security
clear the cache
clear your browser cache
it should work "
I have tried all that, closed and opened a browser but the access tab is still not showing. This is a 10.1.4 portal on LINUX. Starnge enough I have a testing environment installed on my Windows XP (AS 10.2.0.2 not upgarded to 10.1.4) and I don't have any issues with item security access tab at all.
I would appreciate any clues.
Regards,
Anna

There should be two icons shown for each item when you put the page in Edit mode - Edit and Actions. Click on the Actions icon and "Access" should be one of the links in the list of actions (like hide, expire, delete, move, etc.)

WWSBR_ALL_ITEMS and item level security - BUG?

Hi,
View WWSBR_ALL_ITEMS does not seems to work correctly when using item level security on a folder.
If I add an item to a folder with item level security enabled and do NOT define any special access settings for this item, ie the item setting is "Inherit Parent Folder Access Privileges", then the view does not return the item.
Has anyone else run into this? Is it a bug?
Any help appreciated.
Portal 3.0.9.8.0
Oracle8i Enterprise Edition 8.1.7.0 - 64 bit
IBM AIX 4.3.3

I've been informed that patch 3.0.9.8.2 will solve the problem. Sorry about the double post.

Categories and Item Level Security

Hi,
We have implemented item level security on our pages. We also use Categories so that a user can retrieve all content that falls into a particular category easily e.g. address books or Policies and Procedures.
The desire is that if a user clicks on a category and an item the user normally would not see because of item level security on the page where the content is located, then the user should not see that item among all the other items returned by the category search.
What is happening is either that a link to the item is returned among all the other items in the category or we get an access error for the entire category.
We have tried playing with the settings on the template used for the category and with the access on the category result page but have not found the magic bullet yet.
One other interesting behavior in the situation where the restricted item is visible in the returned category search is that clicking on the Page link (instead of showing the page group the item is on, we show the link of the page the item is on)it takes us to the page and the display link for the secured item is now visible followed by what looks like a "smudge" type of character. The item's link can then be clicked and the item's content is now available to the user.
Thanks in advance for any help,
Peter

Tabs don't work with Item Level Security in 9.0.2. Fixed in the upcoming 9.0.2.6 release.
Regards,
Jerry

Item level security not working when placed in a portlet page

I have three page links linking to separate pages and have two of them with item level security turned on for specific groups with view privilges. I have the access for those groups with view privilges in the page level as well. I have published that as portlet and placed the portlet in another page which has view priviliges for the groups specified in item level as well.
But I notice that when i place the portlet in a page, the item level security is not working.
Item Level Security Not Working for Items Placed on a page and published as portlet and placed in another page. Is there some work around for this.
Thanks
Valli

Would you please clarify for me? Is the problem that unauthorized people can see the portlet, or that unauthorized people can see the links?

Item level security...

We have an out of the box solution where users can log there meeting minutes in a custom list. The security of the site consists of about a 100 SharePoint groups which are being used throughout the site collection with different permissions.
For the purpose of this solution we have each group belonging to one of four logical roles (Directors, Power Users, Employees (Internal) and Employees (External). There are about 50 groups that fit the role of Employees. We want to make sure that users can
access only the items if they belong to this logical role. That means that an item created by employee has to be accessible by 50 groups.
What would be the best practice to apply security in this situation since for item level security it would require that inheritance be broken at item level and 50 groups added to the permissions of that item.
Regards

We are often discouraged from using folders, but security is one place they are quite useful. Create one folder for each of your top level groups (Directors, etc), break inheritance on the folder and assign your 50 groups. Upload a file to the folder and
all of the security you need has been applied. You general users don't need to know about the folders. Create view that "Show all items without folders". Keep one view with folders displayed for uploading files.
Mike Smith TechTrainingNotes.blogspot.com
Books:
SharePoint 2007 2010 Customization for the Site Owner,
SharePoint 2010 Security for the Site Owner

Item level security, workflow and tab problems

was wondering if someone could help us out with some problems we are having. We need to up and running over the next two days so anyone who could get back to us pretty quickly would be greatly appreciated.
We are actually having a couple of issues which all revolve around three
groups we have created (for simplicity we have only attached one user to each group). Here are the steps we took:
Problems adding content:
a) Added the three groups to the page group and gave them view access.
b) Turned on approvals and set group3 as the approver.
c) Added the three groups to the page and gave them view access.
d) In the page properties, I enabled item level security.
e) Added an item content area to the page.
f) Added three pieces of simple content
g) For content item1 I granted granted full access to group1(Own, manage, view), for content item 2 I granted full access to group2, etc.
h) WHen I log on as a user in group1 I only see content item1. HOwever, when I edit the page I find I cannot add any items as user1.
i) I went back to the page properties and changed the access of all three groups to "manage items with approval" but let the item level security as it was.
j) When I logged on as user1 I found I could see all items now when I should only have seen content item1. What the hell? Can anyone tell me what I did wrong?
Problems with item level security on tabs:
a) Repeat steps a) through d) above.
b) Create a content region and add three tabs: Home, Work, Life.
c) On the Work tab changed portlet region to item region.
d) Added three items with security exactly as I did above.
e) When I signed on as user1 I saw all three items when I only should have seen item1. What the hell?
f) I monkeyed around with the secutiry at the tab level but it didn't seem to make much difference. ANyone have any ideas what is going on here?
Thanks in advance.

Does the library have versions enabled? Also are these logins occuring within word/excel etc?
If there's multiple login prompts which occur even if entering valid credentials what does hitting escape (after the first prompt) achieve, does the document open anyway?
There's a situation where Office will prompt for credentials if you open a document when you've only got read access but there's a version history (to which you don't have access). This is to allow you to enter more highly privelidged credentials if you
want to.

Setting up item level security access

Hello,
I am new to Oracle Instant Portal and I'm trying to figure out how to set up item level security on a particular tab page. Can anyone give step by step instructions on how to make it work?
So, say that I have a tab page called HR. On that HR page, I have 3 items. For item1 and item2, I want user1 to have view access to these only, and for user2 they could have view access to item3 only.
I checked the option in the HR page's Page Access settings to Enable Item Level Security, saved the changes, and even cleared the cache, but it doesn't seem to give me any new functionality where I could specify that for item1 and item2, only user1 should have access to it, and for item3, only user2 should access it.
Can someone please help?
Thanks!

Please disregard--I figured out how to do this:
1. When you are editing the page, you must click on the "Edit Item" icon next to the item.
2. Then click on the Access tab in the upper right.
3. Select Define Item Level Access Privileges and click Apply.
4. In the Grant Access section that now appears just below, select the user id you want to grant access to the item and then click Add.

Search itens with item level security enabled

Hi,
I have a page that "item level security" enabled.
I am doing a select to get itens...
How can I get only itens that current user have view permission?
select wv.title,
wvt.numbervalue,
wv.description,
'/pls/portal/url/ITEM/'||wv.guid link
from portal.wwv_things wv,
portal.wwv_thingattributes wvt
where wv.siteid = 271
and wv.itemtype = 'basefile'
and wv.subtype = 498194
and wv.active = 1
and wv.language = 'us'
and wv.id = wvt.masterthingid
and wv.siteid = wvt.siteid
and wvt.attributeid = 1354
and wvt.attribute_siteid = 0
and wvt.valuetype = 'number'
order by wv.title;

I found the view. Thanks
portal.WWSBR_ALL_ITEMS

Edit Folder link always is visible if Item Level Security is enabled

Similar Messages

Maybe you are looking for