Edit NROB object

Hi,
Our data loads are going very slow and we wanted to buffer the number ranges. Our system was set to modifiable in both SCC4 and SE03.
I am using SNRO to modify an object, say BID0003809. I get the following message when I try to edit despite our system set to modifiable. What are we missing here?
Diagnosis
The system and namespace change option set for this SAP System does not allow any changes to be made to object NROB BID0003809.
System Response
Editing is terminated, the object can only be displayed.
Procedure
If you want to edit the object NROB BID0003809 in this SAP System, have your system administator set the SAP System to "modifiable" for this object.
This can affect the modifiability of the namespace &1 or the namespaces that correspond to the pattern &1, as well as the global setting of the system change option.
The system change option is set using the Transport Organizer tools (Transaction SE03). Expand the Administration node and execute the program Set system change option. The options are described there.
Thanks,
Kumar

Hello Kumar
Try this..
SE06 -
>System Change Option -
>Edit ( menu)
1. Software components modifiable
2. Namespace modifiable
Save and try to buffer number range.
Regards
Anindya

Similar Messages

When I try to paste an CCI file into a PSD, I get this message- Could not complete the Paste command because the ICC profile is invalid. I need the layer to be an editable smart object! What's the solution? Ron

When I try to paste an CCI file into a PSD, I get this message… Could not complete the Paste command because the ICC profile is invalid.
I need the layer to be an editable smart object! What's the solution?
Ron

I received the file from my client. However, last week I had no trouble pasting the same file into a PSD file, as a smart object.
The color file is a label mechanical, which I place into a PSD file of the product. These are used for print ads and web graphics. The color is very critical and has worked really well for the last 4 years.
I have used the default color settings in Creative Suite and its been working fine. They are in synch and, I have no idea how to re-assign the color profile. I’m a graphic Designer, color correction is not something I would do normally.
Ron

Editing Vector Objects in PDF

When I use the Touch-up Object tool to select a vector element in a PDF and right click to Edit Object the object opens in Illustrator. This is the program I have set in preferences to edit vector objects. The issue I have is when I edit and save the object it shows up in the PDF shifted from its original position (offset to the upper left). How can I get the object to update in the PDF without shifting position?

Yes and No. You have the most up-to-date version of Acrobat 8.1 and
Illustrator, so the bug should have been fixed. I cannot say why it is
not working for you. Of course, the latest version of Acrobat is 9.0,
but I don't think you need to upgrade for the fix. Maybe someone can
chime in. What happens if you create a new file in Illy and create a
pdf, does the problem still happen?
Mike

(bug?)Movie clip contains an object with a z value will not edit the object in place, it goes into a seperate window.

When a movie clip contains an object with a z value, I can not edit the object in place, it goes into a seperate window.
This changes the vanishing point relative to the movieclip instead of the stage (allong with everything else).
This makes it very hard to keep track of where the movieclips will end up when actualy playing the animation.

I should have explained my situation a little better. I have a machine that's made up of a number of parts, some of them are fairly large and some are quite small. When a user clicks on a part, I want to center that part on the screen and then move whole machine toward the screen until the selected part either fills the screen (for the larger parts) or the part bumps up against the front clip plane (for the smaller parts).
I didn't think of checking for a collision with the ViewPlatform's TG, thanks for mentioning that. I wasn't sure how the ViewPlatform's location relates to the clipping plane, but I'll dig into it. I'm still learning how the ViewingPlatform, the image plate, and the clipping planes all relate to each other.

Can we edit customizing objects in abap.

Hi,
I want to edit customizing objects in ABAP?
Is there any way to do so ?
Regards,
Nidhi

Hi Nidhi
If i understood your question ,you talking about SPRO transaction.
But be very careful with your changes...
Regards
Yossi

Editing multiple objects

Pretty simple question, How to I edit multiple objects from their individual centre points?
Cheers
-Ford

Ford,
Object>Transform>Transform Each>(some) options.

You cannot edit proxy object

hi
while i am creating proxy. in se24 i try to edit the method Execute_asynchronus but it showing you cannot edit proxy object.
what i am to do to edit the method.

HI Limat,
u can't edit that.
If it's client proxy then u can send it through some report prog. in which u can call this method and pass the data.
check this link
Concepts and examples for Proxy, Abap Client Proxy and Abap server Proxy
Sachin

I recently upgraded to Yosemite. Now in my Pages documents I cannot select/edit any objects or images. Help Please!

I just recently updated my MacBook Pro to Yosemite 10.10.2
I also updated my "Pages" when asked to.
Now when a open any of my Pages documents, I cannot select/edit any of the objects/images in those documents.
I have gone through the "Pages" help but still cannot solve the problem.
There used to be a "make background objects selectable" button, but I can no longer find it.
I have tried the "arrange tab" > section masters > make master objects selectable, but nothing happened
Any suggestions

Hello Kappy,
I checked out your link and I remember the import box popping up when I upgraded from iWork to Pages a few years ago. My problem is with all files (even documents created with "pages" last week. The documents open fine, I just cannot select/edit the objects/images in the background of my documents. Yes, I have tried going through all of the tab menus and layout options and tried "pages" help.
So my problem is that I cannot open documents and adapt them to my next lesson, etc.
Anyone else have any suggestions?

Cannot Edit in Object Browser using Firefox 1.5.04

Hello Everyone,
I've run into a problem on my installation of XE (Windows 2000, latest patches, 1.5GB RAM). In Firefox (1.5.04), when I go into Object Browser and bring up a stored procedure or function, the code doesn't show in the editor window. I get a single dark green line at the top of the edit area, but no code displays. The edit button greys out when I click it, and all of the other buttons are unresponsive.
I've cleared my cache, exited and restarted Firefox, and rebooted the machine, all to no effect.
It does work okay in IE6, however. I did a forum search and found some threads about other Firefox quirks, but they all appear to be from pre-production versions of XE, and I'm running the latest version I know of: Home, Administration, About Database reports the following:
Oracle Database 10g Express Edition Release 10.2.0.1.0 - Product
PL/SQL Release 10.2.0.1.0 - Production
CORE 10.2.0.1.0 Production
TNS for 32-bit Windows: Version 10.2.0.1.0 - Production
NLSRTL Version 10.2.0.1.0 - Production
Any ideas or pointers would be much appreciated!
John MacLerran, Idaho State University

Jer,
The only extensions it shows are DOM Inspector (1.8.0.4), and Talkback (1.5.0.4). They must be defaults because I don't remember installing them.
I removed both of those, restarted FireFox, and cleared the cache again -- that didn't change anything.
Thanks

Psd files not updating edited smart objects (PS CC as of 6/3/14)

I created a master PSD file and added four different TIF files as 'linked' (not embedded) Smart Objects. If I edit these linked files (they open when double-clicked, or 'Edit Contents') make changes and then save & close the edited master TIF files, the main PSD file does not reflect the edited changes. If I double click the Smart Object, it opens and shows my edits, but to save & close still does not update the master PSD file. I do this all the time without issue, so I am perplexed. Even if I right-click the smart object and select "Update All Modified Content" nothing changes. Closing the file, restarting Photoshop- nothing updates the main PSD file with the changes to the edited TIF files... EXCEPT if I 'replace contents' with the same file: then it updates the PSD.
Any ideas?

I was actually just working in Illlustrator. Selecting the vector object and then select PS and Paste. I'm then asked if I want this to be a smart object. I select yes and it adds the object as a smart object layer. If I double click the layer it opens it in Illustrator, I make a change, save it and close it. Then back to PS and the smart object doesn't update.
I haven't used Place Embedded or Place Linked. I don't understand what those functions do. It's just not how I'm use to working.
Actually I have a large PSD doc. Inside it is a group of objects that I have turned into a Smart object. Inside that (by double clicking) is an AI file that is also a smart object. When I open that up to make a change it won't update once I save and close.
I have tried a coulpe of test with placed Linked and Embedded objects and I can't get those to work either. So what ever the change was. So far not really liking it.

Edited mesh object--now can't redo clipping mask!!!

I edited the color properties of a mesh object that had a shaped clipping mask. Now I'd like to reapply the mask, but Illustrator, in its uniquely enigmatic fashion, will not allow that option in the layers palette. Any ideas on what could possibly be at issue?

Spoke too soon; had to click on the layer, not mesh... Illustrator is still an enigma, though...

Cant edit DAS Object

I followed the instructions from the CoolSolutions article http://www.novell.com/coolsolutions/tip/8019.html and had Radius working fine. I am implementing a new server and using ConsoleOne I am trying to edit the DAS object to allow a new client connection. Problem is when I do add the client, connection type, secret and then select apply all is well. Until I close the window and re-open the properties of the DAS object. The changes are gone. Be it edits or additions. Im kind of at a loss. Help anyone?
Thanks

In article <[email protected]>, Timothy Fitch wrote:
> I followed the instructions from the CoolSolutions article
http://www.novell.com/coolsolutions/tip/8019.html and had Radius working fine. I am implementing a new
server and using ConsoleOne I am trying to edit the DAS object to allow a new client connection. Problem
is when I do add the client, connection type, secret and then select apply all is well. Until I close
the window and re-open the properties of the DAS object. The changes are gone. Be it edits or
additions. Im kind of at a loss. Help anyone?
>
Hmm. I'm thinking I have had this issue, and it was a ConsoleOne issue. Let me check my RADIUS guide...
Didn't see this particular issue listed in my guide, but I know I had the same issue once.
Let's see, I had issues when:
a. Using ConsoleOne launched from ZENworks
b. Using ConsoleOne launched from a local copy
So - in case you are not already doing this, map a drive letter to a server, and launch ConsoleOne from
there. It think that is all I had to do to make the issue go away in my case.
Craig Johnson
Novell Support Connection SysOp
*** For a current patch list, tips, handy files and books on
BorderManager, go to http://www.craigjconsulting.com ***

Where is Edit Merged Object in XI 4.0?

I want to edit a merged object (dimension) in XI 4.0 but all I can do is edit the properties like description. How can I map in additional dimensions to an existing merged dimension without having to unmerge it first?

Hi
Hope this link helps u
http://www.youtube.com/watch?v=GI4UN8MXBnQ&list=PL5724D5287D69497D&index=24&feature=plpp_video
Regards
Sunil

Edit Smart Object in Lightroom instead of ACR

Hi,
I recently aquired both photoshop CS5 and lightroom 3. I'm still trying to get down the best workflow between the two programs. What I'd like to do is to use lightroom as my only raw converter and use photoshop to make the final pixel edits. I've been playing around with smart objects and have noticed that once you open a raw file from lightroom as a smart object in photoshop, it appears your stuck in photoshop. If you want to open the smart object and make alterations it opens in adobe camera raw in photoshop. Is there a way to re-open the smart object back in lightroom instead of in ACR?
Thanks!

If I interpret you correctly, I think what you want is to use PS as a photo editor and retain the image - with the PS-edits - as a RAW-file.
And that is not possible.
You say "that there must be a way to synchronize those instructions".
No, there is no way, even though LR and PS use ACR - and it is the same ACR for both (BTW: ACR means Adobe Camera Raw).
You cannot synchronize the instructions (= edits) because LR writes / saves them in the LR-Catalog, whereas PS (as a pixel-based editor) cannot write into the LR-Catalog (nor can it read the LR catalog).
PS also cannot write XMP-files (alyhough Adobe Bridge can). PS is a pixel-based editor and that means that Adobe can write / save its edits only as a PDF (TIFF, etc)-file.
When you open a RAW-image in PS with previous edits in LR), the image is displayed in PS with the LR-edits. When you then make further edits in PS you have to save those edits as a PSD (TIFF, etc.). If you don't and close the file the PS-edits will be gone and lost.
You say "When you open a Smart Object up in ACR from Photoshop, where does Photoshop keep the instructions/edits?".
I don't know, presumably in RAM or on the PS scratch-disk. But these instructions/edits are not accessible and if you close the file without saving the image they will be lost. And if you save the image you will have a PSD (or TIFF, etc.)
You write: "This way you could "re-edit" the original raw file in Lightroom and then apply those changes to wherever Photoshop keeps the instructions of how to interpret the Smart Object." Yeah, it would be nice but it isn't possible. Maybe Adobe picks your idea and in the future who knows ...
But right now: Nope.
WW

Edit smart object problem - CS4

I have some Illustrator art placed in Photoshop as a smart object. The object contains one main element and then a smaller element off to the side. Now that the object is placed as a smart object I want to edit the content in Illustrator and remove the smaller element that is off to the side. The problem happens that once the element is removed the remaining art placement in the Photoshop document shifts position relative to the new center of the art. Is there any way to change/prevent this?

Giving the objects no fill/stroke has been my work around in the past however this particular element is extremely complex and I was hoping that I could find a quicker and better way. I like the idea of the no fill/stroke bounding box. I will give that a try but I see a potential problem with effects like drop shadows and such. I think that if those effects are expanded and the bounding box set to the area of the expanded raster it might work. I wish that it was "smart" enuf to realize how it was placed/edited and not have to add elements that are for nothing more than to keep it ancored. Is this how it is in CS5?

Edit NROB object

Similar Messages

Maybe you are looking for