Editable OO ALV Problem

Hi Everyone,
My Problem is when i set the edit option in field catalog respective field get converted into edit mode but the data of field is get disappear.
wa_fcat1-fieldname = 'TRADESCHM'.
wa_fcat1-coltext    = 'TRADE SCHEME'.
wa_fcat1-col_pos    = 7.
wa_fcat1-ref_table = 'T_ZVCBD_TRADE_SCHM'.
wa_fcat1-outputlen = '7'.
wa_fcat1-emphasize = c_x.
wa_fcat1-edit       = c_x.
APPEND wa_fcat1 TO t_fcat1.
CLEAR wa_fcat1.
i searched the all threads but didn't got the reason of my problem.
Regards,
Sandeep

Hi,
when we run the report for first time before edit that time only its not showing.
if we check in debugger at this code field have data.
*   Calling the method for alv display
    CALL METHOD w_obj_alv_grid->set_table_for_first_display
       EXPORTING
*        i_buffer_active                =
*        i_bypassing_buffer            =
*        i_consistency_check           =
*        i_structure_name              =
         is_variant                    = w_var
         i_save                        = w_save
*        i_default                     = 'X'
         is_layout                     = wa_layout
*        is_print                      =
*        it_special_groups             =
*        it_toolbar_excluding          =
*        it_hyperlink                  =
*        it_alv_graphics               =
*        it_except_qinfo               =
*        ir_salv_adapter               =
      CHANGING
        t_outtab                      = t_zvcbd_trade_schm*+ " till here is data present perfectly but in outputeditable   field is blank for which we " put the editable on
        it_fieldcatalog                = t_fcat1
*        it_sort                       =
*        it_filter                     =
      EXCEPTIONS
        invalid_parameter_combination = 1
        program_error                 = 2
        too_many_lines                = 3
        OTHERS                        = 4.
Edited by: pas_abap on Feb 15, 2010 10:27 AM

Similar Messages

How to save data in ztable after editing in alv report

how to save data in ztable after editing in alv report?

Hi,
Please find the attachment below.This may be usefull to you.
[http://wiki.sdn.sap.com/wiki/display/Snippets/ALV-Editingandsavingtheeditedvaluesin+Database%28OOPS%29]
Regards,
Ramakrishna Yella.

Make rows as non editable in ALV

Hi Experts,
I have a standard ALV table where records are fetched from backend table. Here I have a field Approved as check box.
My requirement is I need to make all the rows as non editable, if the Approved checkbox is checked. How can I achieve this.
I went through the below discussion, but still am not clear of how to achieve it.
How to set some rows in ALV to be editable or some non editable.
I know to set a field as non editable in WD, but don't know how to set some specific rows as non editable in alv.
Please help me.
With Regards,
Ramakrishnan M

Hi,
Create an Attribute in the Context say READ_ONLY of type wdy_boolean and bind the read only of cell editor to that attribute using set_read_only_fieldname( ) method. Then set the value of attribute READ_ONLY to abap_true/abap_false based on check box value.
check this wiki for reference: How to edit conditionally row of a ALV table in Web Dynpro for ABAP - Web Dynpro ABAP - SCN Wiki
Hope this helps u,
Regards,
Kiran

How to make a particular row and column field editable in ALV

Hi Experts,
I have a requirement to make a particular row and column field editable in ALV output. Like i need to make 2nd row - 4th column editable of ALV output.
Kindly help me out to solve this.
Any help would be appreciated.
Thanks,
Ashutosh

Hi Ashutosh,
please check below, explained by some experts.
In the below link editing two columns MOD_RANK and TECH_RANK.
These two columns will be in edit mode once after selecting the required record
Editing single cell in a row of ALV table
And also look for more info
http://scn.sap.com/thread/884976

Editable WD ALV - Cell Read Only

Hi,
Is there any way for making an individual cell read only for a column-row combination.
My scenario is :
I have an editable WD ALV with data. Now , in row(e.g Index 4) entry of the table, I want to make column2 and Column3 read only for that particular entry(row no.- Index) !! Please guide me through if there is any way to do the same.
Best Regards
Sid

You will have to create an extra attribute for each of your column, of type boolean under the same node. Now bind these attributes to the read only property of your column's cell editors.
Then pass abap_true/abap_false to make the field editable/reaonly.
Check this wiki for your reference,
check this Wiki [https://wiki.sdn.sap.com/wiki/display/WDABAP/How%20to%20edit%20conditionally%20row%20of%20a%20ALV%20table%20in%20Web%20Dynpro%20for%20ABAP]
Regards,
Radhika.

How to Edit in ALV?

Hi Experts,
I am working on a BAPI for creating Requsition where i am taking one ref PR and then modifying required details and then creating a new PR.
Everything is working fine but before creating the new PR i want to display that data in the form of alv grid and where i can edit the values and save then a new PR will be created as per modification on alv.
check the sample code wht i hv done....
SELECT * FROM EBAN INTO CORRESPONDING FIELDS OF TABLE IT_EBAN WHERE
BANFN EQ S_BANFN.
LOOP AT IT_EBAN.
ENDLOOP.
LOOP AT IT_EBAN.
T_REQUISITION_ITEMS-DOC_TYPE = 'ZSD'.
MOVE IT_EBAN-BNFPO TO T_REQUISITION_ITEMS-PREQ_ITEM.
MOVE IT_EBAN-ERNAM TO T_REQUISITION_ITEMS-CREATED_BY.
MOVE IT_EBAN-AFNAM TO T_REQUISITION_ITEMS-PREQ_NAME.
MOVE IT_EBAN-BADAT TO T_REQUISITION_ITEMS-PREQ_DATE.
MOVE IT_EBAN-TXZ01 TO T_REQUISITION_ITEMS-SHORT_TEXT.
MOVE IT_EBAN-MATNR TO T_REQUISITION_ITEMS-MATERIAL.
MOVE IT_EBAN-EMATN TO T_REQUISITION_ITEMS-PUR_MAT.
T_REQUISITION_ITEMS-PLANT = '4000'.
T_REQUISITION_ITEMS-STORE_LOC = 'YRD1'.
T_REQUISITION_ITEMS-PUR_GROUP = 'JSD'.
MOVE IT_EBAN-MATKL TO T_REQUISITION_ITEMS-MAT_GRP.
MOVE IT_EBAN-MENGE TO T_REQUISITION_ITEMS-QUANTITY.
MOVE IT_EBAN-MEINS TO T_REQUISITION_ITEMS-UNIT.
T_REQUISITION_ITEMS-DELIV_DATE = '20080618'.
APPEND T_REQUISITION_ITEMS.
CALL FUNCTION 'BAPI_REQUISITION_CREATE'
EXPORTING
SKIP_ITEMS_WITH_ERROR =
IMPORTING
NUMBER = E_NUMBER
TABLES
REQUISITION_ITEMS = T_REQUISITION_ITEMS
*REQUISITION_ACCOUNT_ASSIGNMENT = T_REQ_ACCOUNT_ASSIGNMENT
REQUISITION_ITEM_TEXT =
REQUISITION_LIMITS =
REQUISITION_CONTRACT_LIMITS =
REQUISITION_SERVICES =
REQUISITION_SRV_ACCASS_VALUES =
RETURN = T_RETURN
REQUISITION_SERVICES_TEXT =
EXTENSIONIN =
REQUISITION_ADDRDELIVERY =
ENDLOOP.
IF NOT E_NUMBER IS INITIAL .
WRITE:/ 'REQ NO:' , E_NUMBER , 'CREATED'.
ELSE.
LOOP AT T_RETURN.
WRITE T_RETURN-MESSAGE.
ENDLOOP.
ENDIF.
what i want is before calling BAPI_REQUISITION_CREATE i need to display it_eban as alv and then where i can edit the values and save and that values will move to T_REQUISITION_ITEMS table. no need of hard cording Plant and purch. grop and storage location details. I know how to display the ALV grid just tell me how to edit in ALV and when i cllick save it shold move to BAPI_REQUISITION_CREATE.
its an urgent...
<b>points will be rewarded for useful answers</b>
Regards,
sunil kairam.

Check this editable alv report...
REPORT zjay_edit_alv.
* TYPE-POOLS *
TYPE-POOLS: slis.
* INTERNAL TABLES/WORK AREAS/VARIABLES
DATA: i_fieldcat TYPE slis_t_fieldcat_alv,
i_index TYPE STANDARD TABLE OF i WITH HEADER LINE,
w_field TYPE slis_fieldcat_alv,
p_table LIKE dd02l-tabname,
dy_table TYPE REF TO data,
dy_tab TYPE REF TO data,
dy_line TYPE REF TO data.
* FIELD-SYMBOLS *
FIELD-SYMBOLS: <dyn_table> TYPE STANDARD TABLE,
<dyn_wa> TYPE ANY,
<dyn_field> TYPE ANY,
<dyn_tab_temp> TYPE STANDARD TABLE.
* SELECTION SCREEN *
PARAMETERS: tabname(30) TYPE c DEFAULT 'MARA',
lines(5) TYPE n DEFAULT 7.
* START-OF-SELECTION *
START-OF-SELECTION.
* Storing table name
p_table = tabname.
* Create internal table dynamically with the stucture of table name
* entered in the selection screen
CREATE DATA dy_table TYPE STANDARD TABLE OF (p_table).
ASSIGN dy_table->* TO <dyn_table>.
IF sy-subrc <> 0.
MESSAGE i000(z_zzz_ca_messages) WITH ' No table found'.
LEAVE TO LIST-PROCESSING.
ENDIF.
* Create workarea for the table
CREATE DATA dy_line LIKE LINE OF <dyn_table>.
ASSIGN dy_line->* TO <dyn_wa>.
* Create another temp. table
CREATE DATA dy_tab TYPE STANDARD TABLE OF (p_table).
ASSIGN dy_tab->* TO <dyn_tab_temp>.
SORT i_fieldcat BY col_pos.
* Select data from table
SELECT * FROM (p_table)
INTO TABLE <dyn_table>
UP TO lines ROWS.
REFRESH <dyn_tab_temp>.
* Display report
CALL FUNCTION 'REUSE_ALV_LIST_DISPLAY'
EXPORTING
i_callback_program = sy-repid
i_structure_name = p_table
i_callback_user_command = 'USER_COMMAND'
i_callback_pf_status_set = 'SET_PF_STATUS'
TABLES
t_outtab = <dyn_table>
EXCEPTIONS
program_error = 1
OTHERS = 2.
IF sy-subrc <> 0.
ENDIF.
*& Form SET_PF_STATUS
* Setting custom PF-Status
* -->RT_EXTAB Excluding table
FORM set_pf_status USING rt_extab TYPE slis_t_extab.
SET PF-STATUS 'ZSTANDARD'. "copy it from SALV func group standard
ENDFORM. "SET_PF_STATUS
*& Form user_command
* Handling custom function codes
* -->R_UCOMM Function code value
* -->RS_SELFIELD Info. of cursor position in ALV
FORM user_command USING r_ucomm LIKE sy-ucomm
rs_selfield TYPE slis_selfield.
* Local data declaration
DATA: li_tab TYPE REF TO data,
l_line TYPE REF TO data.
* Local field-symbols
FIELD-SYMBOLS:<l_tab> TYPE table,
<l_wa> TYPE ANY.
* Create table
CREATE DATA li_tab TYPE STANDARD TABLE OF (p_table).
ASSIGN li_tab->* TO <l_tab>.
* Create workarea
CREATE DATA l_line LIKE LINE OF <l_tab>.
ASSIGN l_line->* TO <l_wa>.
CASE r_ucomm.
* When a record is selected
WHEN '&IC1'.
* Read the selected record
READ TABLE <dyn_table> ASSIGNING <dyn_wa> INDEX
rs_selfield-tabindex.
IF sy-subrc = 0.
* Store the record in an internal table
APPEND <dyn_wa> TO <l_tab>.
* Fetch the field catalog info
CALL FUNCTION 'REUSE_ALV_FIELDCATALOG_MERGE'
EXPORTING
i_program_name = sy-repid
i_structure_name = p_table
CHANGING
ct_fieldcat = i_fieldcat
EXCEPTIONS
inconsistent_interface = 1
program_error = 2
OTHERS = 3.
IF sy-subrc = 0.
* Make all the fields input enabled except key fields
w_field-input = 'X'.
MODIFY i_fieldcat FROM w_field TRANSPORTING input
WHERE key IS INITIAL.
ENDIF.
* Display the record for editing purpose
CALL FUNCTION 'REUSE_ALV_LIST_DISPLAY'
EXPORTING
i_callback_program = sy-repid
i_structure_name = p_table
it_fieldcat = i_fieldcat
i_screen_start_column = 10
i_screen_start_line = 15
i_screen_end_column = 200
i_screen_end_line = 20
TABLES
t_outtab = <l_tab>
EXCEPTIONS
program_error = 1
OTHERS = 2.
IF sy-subrc = 0.
* Read the modified data
READ TABLE <l_tab> INDEX 1 INTO <l_wa>.
* If the record is changed then track its index no.
* and populate it in an internal table for future
* action
IF sy-subrc = 0 AND <dyn_wa> <> <l_wa>.
<dyn_wa> = <l_wa>.
i_index = rs_selfield-tabindex.
APPEND i_index.
ENDIF.
ENDIF.
ENDIF.
* When save button is pressed
WHEN 'SAVE'.
* Sort the index table
SORT i_index.
* Delete all duplicate records
DELETE ADJACENT DUPLICATES FROM i_index.
LOOP AT i_index.
* Find out the changes in the internal table
* and populate these changes in another internal table
READ TABLE <dyn_table> ASSIGNING <dyn_wa> INDEX i_index.
IF sy-subrc = 0.
APPEND <dyn_wa> TO <dyn_tab_temp>.
ENDIF.
ENDLOOP.
* Lock the table
CALL FUNCTION 'ENQUEUE_E_TABLE'
EXPORTING
mode_rstable = 'E'
tabname = p_table
EXCEPTIONS
foreign_lock = 1
system_failure = 2
OTHERS = 3.
IF sy-subrc = 0.
* Modify the database table with these changes
MODIFY (p_table) FROM TABLE <dyn_tab_temp>.
REFRESH <dyn_tab_temp>.
* Unlock the table
CALL FUNCTION 'DEQUEUE_E_TABLE'
EXPORTING
mode_rstable = 'E'
tabname = p_table.
ENDIF.
ENDCASE.
rs_selfield-refresh = 'X'.
ENDFORM. "user_command

How to make field is editable in ALV CL_SALV_TABLE only)

Hi,
How to make field is editable in ALV CL_SALV_TABLE only)
Any one has tried to make field si editable by using CL_SALV_TABLE class.
*I know how to do it in REUSEALV function module and CL_GUI_ALV class.*_
Please reply only if you riedin CL_SALV_TABLE class method.
Regards
Rajesh V
Moderator message: not supported, please read class documentation and search for previous discussions.
Edited by: Thomas Zloch on Mar 17, 2011 2:07 PM

Hi Chad,
Please refer the link,
Edit field in alv
Regards,
Hema.
Reward points if it is useful.

How to make fields/columns un-editable in ALV

Hi,
How can I make a field/column un-editable in ALV.
I tried writing: ls_fc_po-edit = ' '.     (inside loop for the selected column/field), but it doesnot work for me.
Any suggestions please.
Thanks,
Ravish

The code for the field catalogue is below:
LOOP AT lt_fc_po INTO ls_fc_po.
    IF ls_fc_po-fieldname EQ 'PO_ID'.
      ls_fc_po-no_out = 'X'.
    ELSEIF ls_fc_po-fieldname EQ 'UNIT_OF_MEASURE'.
      ls_fc_po-outputlen = '10'.
      ls_fc_po-tooltip = 'Unit of Measure'.
    ELSEIF ls_fc_po-fieldname EQ 'ITEM_ID'.
      ls_fc_po-outputlen = '10'.
      ls_fc_po-tooltip = 'Purchase Order Items'.
    ELSEIF ls_fc_po-fieldname EQ 'QUANTITY'.
      ls_fc_po-outputlen = '10'.
    ELSEIF ls_fc_po-fieldname EQ 'CURRENCY'.
      ls_fc_po-edit = ' '.
      ls_fc_po-outputlen = '10'.
      ls_fc_po-tooltip = 'Currency'.
    ELSEIF ls_fc_po-fieldname EQ 'DATE_OF_DELIVERY'.
      ls_fc_po-outputlen = '18'.
      ls_fc_po-coltext = 'Delivery Date'.
      ls_fc_po-tooltip = 'Requested Delivery date'.
    ELSEIF ls_fc_po-fieldname EQ 'PLANT_ID'.
      ls_fc_po-outputlen = '15'.
      ls_fc_po-coltext = 'Plant'.
      ls_fc_po-tooltip = 'Plant Identifier'.
    ELSEIF ls_fc_po-fieldname EQ 'MATERIAL_DESC'.
      ls_fc_po-outputlen = '18'.
    ELSEIF ls_fc_po-fieldname EQ 'MATERIAL_ID'.
      ls_fc_po-outputlen = '15'.
      ls_fc_po-coltext = 'Material'.
      ls_fc_po-tooltip = 'Material Identifier'.
      IF GL_PO_EVENT_ALV = 0.
        GL_PO_EVENT_ALV = 1.
        data: l_field type lvc_fname.
        data: lt_f4 type lvc_t_f4.
        data: ls_f4 type lvc_s_f4.
        l_field = ls_fc_po-fieldname.
        ls_f4-fieldname = l_field.
        ls_f4-register   = 'X'.
        ls_f4-getbefore = 'X'.
        ls_f4-chngeafter = 'X'.
        append ls_f4 to lt_f4.
        CALL METHOD po_itm_trn_alvgrid->register_f4_for_fields
          EXPORTING
            it_f4 = lt_f4.
      ENDIF.
    ENDIF.
    MODIFY lt_fc_po FROM ls_fc_po.
ENDLOOP.

Unable to capture data in an editable dynamic ALV.

Hi ,
I have created a dynamic editable ALV whose displayed structure can be changed at runtime based on the selection in a drop down list value selector.
Im trying to capture the values entered in the ALV into an internal table before the user changes the structure of the ALV to a different structure.
In the ON_SELECT event handler of the drop down list box , im rasing a data_check event to capture the ALV data.
The problem is that the control is not entering the event handler for the data_check event.
If i raise the data_check event in my save event handler or any other event handler , it works fine.
Can someone please suggest a solution.
Regards,
Newton.

Hi ,
I have figured out that the problem is local to my machine , because the code works fine on other machines.
I guess my internet explorer has some bug.
Regards,
Newton.

How can i choose row to edit in alv report

hello ,
i done alv report with one coloumne that can be edit ,
in this coloumne i want to choose which rows can be edit
and which will be close according to event .
i saw example program "BCALV_EDIT_02" that show this case
but stile , i don't understand what is the action that
do it .
this is the part
IF p_mode EQ 'RW'.
*§2a.Use attribute CL_GUI_ALV_GRID=>MC_STYLE_ENABLED to set a cell
   to status "editable".
    l_mode = cl_gui_alv_grid=>mc_style_enabled.
ELSE. "p_mode eq 'RO'
*§2b.Use attribute CL_GUI_ALV_GRID=>MC_STYLE_DISABLED to set a cell
   to status "non-editable".
    l_mode = cl_gui_alv_grid=>mc_style_disabled.
ENDIF.
so what is the part that will close the row for edit ?
when i add this part in my report all the row is deleted.
thanks.

Dakota,
You can change the settings at runtime.
What you need to do is to have another column as part of the internal table, that has the data. This column, say, STYLE will refer to LVC_T_STYL. So, this becomes a nested internal table.
Set the editable flga switched off at Fieldcat and layout level.
Now, while filling the data in the table, or looping it separately, fill the Styles table for each row accordingly depending on the conditions. So, if you want the entire row to be enabled for editing, there will so many rows as the no. of columns in the inner internal table which is a column of that row.
col1 col2   Col3 Style
1     1      2     Col1 -- Style_Disabled
___________________Col2 -- Style_Disabled
___________________Col3 -- Style_Disabled
This should solve your problem.
Regards,
Ravi
note : Please reward the posts that help you.
Message was edited by: Ravikumar Allampallam

ALV - problem to disable row selection (SET_ROW_SELECTABLE)

Hi,
I'm using an (non editable) ALV with a supply function to display details to each line.
I have to buttons "New" and "Modify" to insert a new line or to modify an existing row (in the details).
This works fine.
Now what I want to do is, if the user press one of the buttons "New" or "Modify", I want to disable the row selection of the ALV, so the user can't select another row during inserting or editing.
For this, I've implemented in the WDDOMODIFYVIEW of the view the coding to enable or disable the row selection
lo_value->if_salv_wd_table_settings~SET_ROW_SELECTABLE( ABAP_TRUE ).
* or
lo_value->if_salv_wd_table_settings~SET_ROW_SELECTABLE( ABAP_FALSE ).
In case of "New" this works fine. The row selection is disabled.
But not in case of "Modify".
There is a strange behaviour:
The row selection is not completely disabled. It looks like you can select rows, but if you select another row, it is automatically jumping to the first row and also the details is updated to the first row.
The different between "New" and "Modify" is, that in "New", I create a new element in the ALV.
Than it works correct. If I do the same in "Modify", I have the same correct behavior.
But of course, I don't want to insert a new row in my "modify" mode.
So maybe it has something todo with set lead selection?
Maybe I do something wrong or that is a problem in the abap release. But I can't find anything in OSS.
Thanks in advance!
Andreas

Hi,
I would like to propose another approach here,
I assume that ALV is in read only mode.
1. User select the row and press the "Modify" button. As soon as user press the modify button "disable" the Modify and New button.
2. Once the user is finish with the changes and press save. Enable the new and modify button.
3. Without saving if user select anyother row then raise the "Save" confirmation popup with Yes, NO and Cancel button.
4. If User press the New button then add new row and disable the "New" and "Modify button". Follow the Step 2 and 3 for this case also.
I hope this will give you some idea.
Thanks,
Rahul

Alv. problem in I_call

Hi Gurus,
            Problem in this program.plz check it its very urgent.
im working in version 4.6. the problem is in I_call_back.plz help me in this.
Correct answers will be appreciated with good points.
Thanks & regards
sunita
TABLES : likp.
TYPE-POOLS: slis.
SELECTION-SCREEN BEGIN OF BLOCK b1.
SELECT-OPTIONS: s_vkorg FOR likp-vkorg,
s_vstel FOR likp-vstel,
s_vbeln FOR likp-vbeln,
s_lfdat FOR likp-lfdat,
s_lfart FOR likp-lfart ,
s_wadat FOR likp-wadat,
s_wa_ist FOR likp-wadat_ist,
s_kunnr FOR likp-kunnr,
s_kunag FOR likp-kunag.
SELECTION-SCREEN END OF BLOCK b1.
DATA: BEGIN OF itab OCCURS 0.
INCLUDE STRUCTURE likp.
DATA: zchk(20),
END OF itab.
DATA: gt_fcat type slis_t_fieldcat_alv.
SELECT * FROM likp
INTO CORRESPONDING FIELDS OF TABLE itab
WHERE vkorg IN s_vkorg
AND vstel IN s_vstel
AND vbeln IN s_vbeln
AND lfdat IN s_lfdat
AND lfart IN s_lfart
AND wadat IN s_wadat
AND wadat_ist IN s_wa_ist
AND kunnr IN s_kunnr
AND kunag IN s_kunag.
LOOP AT itab.
IF itab-wadat = itab-wadat_ist.
itab-zchk = 'OK'.
ELSE.
itab-zchk = 'Posting Error'.
ENDIF.
ENDLOOP.
CALL FUNCTION 'REUSE_ALV_FIELDCATALOG_MERGE'
EXPORTING
i_program_name = sy-repid
i_internal_tabname = itab
CHANGING
ct_fieldcat = gt_fcat.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
i_callback_program = sy-repid
it_fieldcat = gt_fcat

Hi Sunita,
Create your ALV output structure via the ABAP Dictionary (SE11) as a dictionary Structure (ZSTRUCTURE) and then follow the code changes as below:
CALL FUNCTION 'REUSE_ALV_FIELDCATALOG_MERGE'
EXPORTING
    i_program_name     = sy-repid
*    i_internal_tabname = 'ITAB' --------------> Delete
    I_STRUCTURE_NAME   = 'ZSTRUCTURE' <----------------
CHANGING
    ct_fieldcat        = gt_fcat.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
    i_callback_program = sy-repid
    it_fieldcat        = gt_fcat
TABLES
    t_outtab           = itab.   <----------------------------
Cheers,
Sougata.
Message was edited by:
        Sougata Chatterjee

Screen painter not working properly to edit an ALV screen

Hi I am stuck with a problem, I want to edit a screen which is an ALV report screen and add a custom button to its toolbar. But the screen painter is not opening properly so that I can see the screen layout and add a button.
Any help is greatly appreciated....

HWat do u mean by the screen is displaying improperly? Is teh graphical layout not coming?
If so, you have to contact your basis team. you need to get the latest Gui version, and you need a particular port to be opened.

ALV: Problem with toolbar event

Hi ALV-experts,
I have a dynpro with a header area where I display an ALV table. Below this I have a subscreen with a tabstrip control and two tabs.
In the ALV toolbar I defined an own button. This button gets deactivated after pressing this button. I achieved this by the option "disabled" in the structure stb_button within the event handler for the toolbar event.
This works all fine so far. If I start the dynpro and click on the button in the ALV-toolbar the buttons gets deactivated afterwards. But I have I jump between the tabs before I press the ALV-toolbar button, the button does not get deactivated.
The debugger does not go into the event handler of the toolbar event. I also did system debugging of the method SET_TOOLBAR of the CL_GUI_ALV_GRID-class. Here I pass in both cases the command
raise event toolbar e_object = m_cl_toolbar e_interactive = i_interactive.
but in the second case (when I change the tabs before I press the button) the event handler is not executed and I don't know why. I also tried to register the event handler for all instances of the ALV still with the same result.
The ALV method set_toolbar_interactive( ) did also not solve the problem.
I couldn't find any SAP note about an issue for this event.
Does anybody have an idea or a solution for this problem?
EDIT:
Problem solved, it was typo!
Thanks in advance and regards,
Martin
Edited by: Martin Fischer on Jul 7, 2010 4:53 PM

The problem was a typo!

SAP Gui 7.20 PLevel 3, ALV Problems with German Umlauts u00FCu00F6u00E4...

Hi,
we have updated our SAP Gui to version 7.20 lately and have some serious problems now with entering German Umlauts 'üöäÜÖÄß' into any editable ALV grid.
This means when typing in e.g. 'ü', the grid immediately removes this character and replaces it by, well, by nothing. It just ignores this character at all.
SAP Gui is currently at patch level 3 . The correct version is 7200.1.3.3190, build 1196830. Running German Windows XP clients with service pack 3. ERP is running SAP ECC 6.0.
Is this a known problem? Has sbdy. a workaround this?
Edit: Just found the release notes for SAP Gui 7.20 Lvl 3:
2010/09/02 Texts get garbled while typing umlaut character in ALVGrid, Note 1503081
This note, however, is not open for public view. OTH this means SAP was aware of this problem and tried to correct it to no avail so far.
Thanks,
Michael
Edited by: Michael Fritz on Nov 19, 2010 11:19 AM

Hi Martin,
where did you get this info? Any official SAP note available? Do you encounter similar problems?
We, too, noticed that uploading and downloading files from directories with German Umlauts, this fails now,too. There may be problems with files, too, however, we did not check this so far. The previous SAP Gui, I guess it was 7.10, didn't have any problems with this.
I start wondering if SAP Germany have ever tested this? Or do they not use Umlauts anyway

Editable OO ALV Problem

Similar Messages

Maybe you are looking for