Editing bug + workaround

I wonder if any of you have seen this one, which I encountered yesterday, along with a fix for it. Here's the scenario: I've been recording screencasts for a current project using "Automatic Recording," demonstration mode, no narration, no panning. After they're shot, I'm using the text-to-speech option to provide the voice overs, which generally precede each bit of demonstration.
Cp4 creates quite a few slides to represent each procedure. It's common for mouse clicks to be isolated on their own slides, generally with a duration of 1 or 1.5 seconds. I noticed that these had a visual click, but the audio wasn't there. But when I chopped each of these "click slides" down to 0.5 seconds, the audio came back. I experimented with a lot of different lengths, but 0.5 seemed to be the magic number.
I'm enjoying Automatic recording. I had used manual recording previously. The Automatic option speeds things up. I'm not sure if I'll keep the robot voices in the final project or not, but they do give me a nice way to write out and improve the script as I go, rather than trying to compose it ahead of time (which would never work for me). They definitely speed up my workflow, though.

That would sure be a great feature for CFBuilder in fact, word-wrap that works properly. It's one of
the biggest gripes I have with Eclipse versus other editors. Not as big an issue as when monitors were much smaller....but still, there are definitely times it would be nice to quickly toggle word-wrap on and off the way you can in most text editors. I find in CFB currently I even have to restart after turning it back off, to get pages to display properly.

Similar Messages

Consolidation of Oracle Database 10g Express Edition "Bugs"

I'll take a stab at cleaning this up. This is a collection of postings, reported as bugs, but not really bugs or difficult to understand/reproduce. These were filed in the Database General forum and they should have been filed in the XE forum.
Firstly, thank you for taking the time to report these issues and suspected issues. In the future, it would be quite helpful to everyone if you reported these in the XE forum.
1. Oracle Database 10g Express Edition Bugs
This is not a bug. The developer toolbar will show when you are authenticated to the development environment. You do not have to be authenticated to your application for the developer toolbar to appear.
2. Oracle Database 10g Express Edition Bugs
If data is present in the cache, this is up to the application developer (you) to implement the proper security which prevents this behavior.
3. Oracle Database 10g Express Edition Bugs
This is a minor issue, at best. For this type of search interface, it is desirable to perform a case-insensitive query. Wouldn't it be a shame if you searched for "item" and it did not return results that contained "Item".
4. Oracle Database 10g Express Edition Bugs
This is not a bug. Different authentication schemes have different data restrictions. It is up to you, the application developer, to easily implement the data validations appropriate for your application.
5. Oracle Database 10g Express Edition Bugs
Insufficient information provided. You will have to specify what exact error message is arising and what data you changed which resulted in this error. A complete step-by-step test case is desirable, please.
6. Oracle Database 10g Express Edition Bugs
Duplicate of #5 above. And still insufficient information.
7. Oracle Database 10g Express Edition Bugs
Not a bug. This is intentional behavior. If I know I want to enter table name EMP, it would be bad from a usability standpoint to always force the user to employ their mouse.
8. Oracle Database 10g Express Edition Bugs
This could not be reproduced.
9. Oracle Database 10g Express Edition Bugs
Almost identical to #8. Please clarify what the expected behavior should be.
Joel

This discussion has been continued in the XE forum at:
Consolidation of Oracle Database 10g Express Edition "Bugs"
In the future, please attempt to post all XE-related issues in the XE forum.
Joel

[svn:fx-trunk] 8581: asdoc edits: bug fix FLEXDOCS-1000

Revision: 8581
Author:   [email protected]
Date:     2009-07-15 08:47:47 -0700 (Wed, 15 Jul 2009)
Log Message:
asdoc edits: bug fix FLEXDOCS-1000
Ticket Links:
    http://bugs.adobe.com/jira/browse/FLEXDOCS-1000
Modified Paths:
    flex/sdk/trunk/frameworks/projects/framework/src/mx/controls/RadioButton.as
    flex/sdk/trunk/frameworks/projects/spark/src/spark/components/RadioButton.as
    flex/sdk/trunk/frameworks/projects/spark/src/spark/components/Spinner.as
    flex/sdk/trunk/frameworks/projects/spark/src/spark/components/supportClasses/Slider.as

ICal Alarm Editing Bug: Time off 4 hours, not fixed yet in 10.5.5?

Hi again all Mac users,
I have noticed this bug for quite a long while, which I cannot remember from when, but I think it was from around 10.3 or 10.4. I am used to it, and can deal with this since I know it. But, it still seems to persist even after updating to 10.5.5, and I have finally wanted to raise the issue up to this forum, in order to get it fixed, or obtain knowledge on how to fix this in my Mac.
When you double-click or Command+I an event in iCal, the detail of the event shows up, and you click "Edit" button at the bottom to edit it. Most of my events' "Alarm" are set as "Alarm with Sound". To edit this, you click right next to "Alarm" to bring out the pull-down menu. You can change "Alarm with Sound" to "No Alarm", etc. Also, you will see a list of the latest settings you used at the bottom of this pull-down menu, with date, time and sound, etc. to choose from.
*My Bug Phenotype:*
ALL of the listed settings in this pull-down menu are EXACTLY 4 hours (FOUR HOURS) later of what that actually sets and do. For instance, I set a new event at "2008/6/1 10:00, playing Susumi sound". This setting will newly show up in the for-mentioned pull-down menu. But, because of a bug or by an unknown reason, within the list it shows "2008/6/1 14:00, playing Susumi sound", showing the time 4 hours later. Continuously, if you edit another event's alarm setting, and choose the previous setting of erroneous "2008/6/1 14:00, playing Susumi sound" that shows up from the pull-down menu, the event you're editing will actually be set to "2008/6/1 10:00, playing Susumi sound", which is correct with the very original setting I first used, but then again it is 4 hours ahead of what you see in the pull-down list. Once set, all event will show the proper Alarm time set, and work at the correct timing. It seems that there's a bug just in this pull-down menu showing the previous settings, adding and showing 4 hours later to what it should be, but also correctly stores and set the original time.
Does everybody understand what I tried to explain?
Does anyone else have the same experience?
Is this just me?
Is it always 4 hours?
Any way to fix this?
Is this an iCal Bug, to be fixed?
Thanks for your help in advance!
Dr.MORO
PS: Is there a way to directly (Online) way to tell (email, post, etc) this problem to Apple?
PPS: I have used many different disk maintenance tool of most kinds, both free and commercial, but nothing has helped.
PPPS?: This is my second post on this iCal issue this year, last time on May 30, 2008, but no one seems to care... Really? No one has the same symptoms? Weird...

Dr.MORO,
1. Try refreshing the iCal plist file. Navigate to your Macintosh HD/Users/yourusername/Library/Preferences Folder, and find the com.apple.iCal.plist file. Drag that file to your desktop, log out/in or restart.
2. What time do you have set in your iCal Time Zone Window?
3. Have you tried to change your settings in System Preferences...>International>Formats>(Region:) (Dates) (Times)? Customize... Quit iCal before changing these settings, and repeat #1 above before opening iCal.
4. Do you have a default time checked in iCal>Preferences...>General>Add a default alarm to all new events and invitations?
5. Do you have "Turn on time zone support" checked in iCal>Preferences>Advanced?
6. Do you have the proper "Time Zone" selected in System Preferences...>Date & Time?
7. Are you syncing any of your computers?
PS: Is there a way to directly (Online) way to tell (email, post, etc) this problem to Apple?
Only through AppleCare, but your equipment is probably no longer covered. As far as I know you could still use AppleCare but it would cost an arm and a leg for phone support since you no longer have a contract. Do you have an Apple Store or Authorized Apple Provider nearby?
PPPS?: This is my second post on this iCal issue this year, last time on May 30, 2008, but no one seems to care...
Since Apple Discussions participation relies entirely upon other users for possible solutions, it is my guess that no one had the same problem or could offer a reasonable solution. Sorry to hear that you did not get a response to your previous post, but I care.
;~)

ICal Alarm Editing Bug, not fixed yet in 10.5.3?

Hi All Mac users,
I have noticed this bug for quite a long while, which I cannot remember from when, but I think it was from around 10.3 or 10.4. I am used to it, and can deal with this since I know it. But, it still seems to persist even after updating to 10.5.3, and I have finally wanted to raise the issue up to this forum, in order to get it fixed, or obtain knowledge on how to fix this in my Mac.
When you double-click or Command+I an event in iCal, the detail of the event shows up, and you click "Edit" button at the bottom to edit it. Most of my events' "Alarm" are set as "Alarm with Sound". To edit this, you click right next to "Alarm" to bring out the pull-down menu. You can change "Alarm with Sound" to "No Alarm", etc. Also, you will see a list of the latest settings you used at the bottom of this pull-down menu, with date, time and sound, etc. to choose from.
*My Bug Phenotype:*
ALL of the listed settings in this pull-down menu are EXACTLY *4 hours* (FOUR HOURS) later of what that actually sets and do. For instance, I set a new event at "2008/6/1 10:00, playing Susumi sound". This setting will newly show up in the for-mentioned pull-down menu. But, because of a bug or by an unknown reason, within the list it shows "2008/6/1 14:00, playing Susumi sound", showing the time 4 hours later. Continuously, if you edit another event's alarm setting, and choose the previous setting of erroneous "2008/6/1 14:00, playing Susumi sound" that shows up from the pull-down menu, the event you're editing will actually be set to "2008/6/1 10:00, playing Susumi sound", which is correct with the very original setting I first used, but then again it is 4 hours ahead of what you see in the pull-down list. Once set, all event will show the proper Alarm time set, and work at the correct timing. It seems that there's a bug just in this pull-down menu showing the previous settings, adding and showing 4 hours later to what it should be, but also correctly stores and set the original time.
Does everybody understand what I tried to explain?
Does anyone else have the same experience?
Is this just me?
Is it always 4 hours?
Any way to fix this?
Is this an iCal Bug, to be fixed?
Thanks for your help in advance!
Dr.MORO
PS: Is there a way to directly (Online) way to tell (email, post, etc) this problem to Apple?
PPS: I have used many different disk maintenance tool of most kinds, both free and commercial, but nothing has helped.

Dr.MORO,
1. Try refreshing the iCal plist file. Navigate to your Macintosh HD/Users/yourusername/Library/Preferences Folder, and find the com.apple.iCal.plist file. Drag that file to your desktop, log out/in or restart.
2. What time do you have set in your iCal Time Zone Window?
3. Have you tried to change your settings in System Preferences...>International>Formats>(Region:) (Dates) (Times)? Customize... Quit iCal before changing these settings, and repeat #1 above before opening iCal.
4. Do you have a default time checked in iCal>Preferences...>General>Add a default alarm to all new events and invitations?
5. Do you have "Turn on time zone support" checked in iCal>Preferences>Advanced?
6. Do you have the proper "Time Zone" selected in System Preferences...>Date & Time?
7. Are you syncing any of your computers?
PS: Is there a way to directly (Online) way to tell (email, post, etc) this problem to Apple?
Only through AppleCare, but your equipment is probably no longer covered. As far as I know you could still use AppleCare but it would cost an arm and a leg for phone support since you no longer have a contract. Do you have an Apple Store or Authorized Apple Provider nearby?
PPPS?: This is my second post on this iCal issue this year, last time on May 30, 2008, but no one seems to care...
Since Apple Discussions participation relies entirely upon other users for possible solutions, it is my guess that no one had the same problem or could offer a reasonable solution. Sorry to hear that you did not get a response to your previous post, but I care.
;~)

Win 8.1 Start button and Charms randomly stops working BUG (workaround)

To anyone experiencing this, it is a bug in Win 8.1 which I can replicate at will.
Reinstalling your system as suggested by MS engineers will not fix this.
To force the bug to appear:
1. Grab a desktop Icon (recycle bin, any shortcut) and move this up to the top left hand corner without letting go of the mouse button. Drop shortcut anywhere on desktop. Without an Icon the mouse pointer would initiate the recent apps.
2. To check that the first step has worked, try and invoke charms by moving mouse to top right hand corner. If Charms do not appear then the bug has been triggered.
3. Now move mouse over start button (no click), move away then back again. Now the start button is locked. If you unlock the taskbar you can move it to any other position (top, left or right) and the start button works. Move taskbar back to the
bottom and the start button still does not work. Only way to get it working again is to restart window explorer in task manager.
To avoid this happening all you need to do is disable recent apps corner.
1. Right click desktop.
2. Click Taskbar and Navigation
3. Click Navigation tab in the properties window
4. Uncheck "When I click the upper-left corner, switch between my recent tabs."
Now the bug cannot be triggered as above to make the start button stop working. You have to remove this feature which is pretty hopeless on a desktop anyway. Its better than restarting Window explorer every time.
I can replicate this on any desktop or laptop, fresh install or old. Not sure about any touch screen machines. I can also trigger this in VMPlayer\Virtual Box and the Modern IE VM images that MS provide.
Now the MS engineers can replicate this on their machines, and maybe if we are lucky they will FIX it!!!!
MS please acknowledge that this is a bug.
Maybe the issue is due to the windows button not being redrawn on the screen once triggered as it still works when taskbar is moved (graphic card drivers). Could not find anything use full in the system logs.
Just noticed also that the charms also breaks if you drag an Icon up to the right hand corner. Once triggered Charms stops working, start button is not affected with the above work around configured.
MS please read this and reply.

suspect it is local to your environment.
Others seeing the same symptom. Note that originally I was not using the
Top left hover for thumbnail feature and then also claimed not to see it.
Oh. And here is another factor that someone else is using as a workaround. A link to the first thread I was thinking of can be found in this one
https://social.technet.microsoft.com/Forums/ie/en-US/d4526a1c-f811-4b67-9e4f-8a2e8f301917/charms-bar-and-start-button-freezes?forum=w8itprogeneral#2a21ea9a-4924-4808-9c2f-c4a7c0de8223
Robert Aldwinckle

Flash Builder Design Mode Bug Workaround (!!!)

I've been fighting this annoyance since FB4 came out, and while I still don't think that custom/embedded fonts in design view are fixed by this, I've been able to reproduce this "fix" (workaround) to get design view to show fonts/theme correctly under some very specific circumstances on two separate PCs.
If anyone from Adobe sees this I'd like to know whether this sounds familiar or is possibly logged as a bug already somewhere in JIRA.. if not I could probably do that as long as it won't be a wasted effort.
The problem:
You're using a Halo theme but certain CSS settings (specifically and possibly limited to FONTS) don't work properly in design view even though they work fine in Flash. Essentially this makes design view practically useless since choice of font family, size, and weight can effect component sizing if you aren't hard-coding component sizes (ugh)... ruining your efforts to use design view for UI design if your UI has any level of complexity (or uses absolute positioning at all).
The specific circumstances seem to be:
You're using the Halo theme (you have no special 'skinning' requirements and want Halo defaults w/only CSS customizations)
You've upgraded a Flex 3 project to Flex 4 SDK (not sure if this is needed to reproduce the issue)
Using a regular non-embedded font (embedded fonts still do crap out, but even this 'workaround' doesn't fix that problem)
You're using swc library files such as the Swiz lib, Mate, Flexlib, etc. (I think it's ANY swc, not specific to any one)
This may also only apply when using an "mx only" project (no Spark), since we're using Halo here
The two part fix (as far as I can tell you need BOTH before design view works correctly):
In .actionScriptProperties, add the following bolded line after the compiler tag like so:
</compiler>
<theme themeIsDefault="false" themeIsSDK="true" themeLocation="${SDK_THEMES_DIR}/frameworks/themes/Halo"/>
<applications>
(I think this may only apply to 'upgraded' projects, as the line does seem to be present in newly created FB4 Halo projects. My guess is that an "upgraded" project should have such a line added, but doesn't get it due to an oversight/bug.)
The somewhat painful, and definitely odd part. Remove all your SWC library files from /libs. Grab the source code for the libraries and drop them into your project's /src folder as if you'd written them yourself. (This may require some research and knowledge on special requirements to build the libs, such as with Swiz's compiler metadata compiler settings which you need to put into your project's settings.) After you get things set up right and the project compiles again, doing a refresh of design view should finally give you proper looking Halo controls and fonts so they look identical to the Flash runtime view.
Why this works, I've no idea. I suspect it has something to do with that stupid and annoying (and supposedly 'harmless') design mode warning message you get when you include a library like Swiz or Mate in your project. (Design mode could not load xxxxxxxxxxxxx.swc. It may be incompatible with this SDK, or invalid. (DesignAssetLoader.CompleteTimeout)) - this warning doesn't break your application, people seem to think it's just a harmless warning..but is it breaking design view?
If anyone has any idea what's going on here, why this 'fixes' the problem (a better work around), or has any other insight I'd love to hear it. The combo of needing to do two things (in my specific case) to fix the problem really made this a ROYAL PAIN, I still can't believe I found it.

Hi Fernando, sorry for the delayed response. CSS Design Mode is not available for Flex 4 projects, but it is still available in Flex 3 projects. The reason for this is that designing components in Flex 4 is often a lot different, since it relies highly on the new spark skinning architecture. There is, however, an Appearance panel available in design view which supplies a set of the main inheriting styles. Setting these styles in the Appearance panel will result in assigning values to a global style selector.
I hope this helps,
Rob

Text editing bug: conflict with Facebook widget

And just when I thought this program couldn't be MORE frustrating. The simplest of text editing features flatly refused to cooperate. Double click, triple click, with the direct selection tool selected. Nope won't select a goddam thing. Turned out to be a conflict with a Facebook widget I had applied on a master page.
ATTN: bug department!

Thank you so much for replying.
Yes I have removed and reinstalled WMP.
I had good results with the PD6 application installed on the default path onto the C: drive with the one exception that if the application was launched by accident and the user data path was not available, the PD6 application would blow away my custom user path registry settings. Now that I know what they are I have made a .reg file to repair my registry to my desired user data paths.
Installing the application on the removable drive appeared to help prevent me from launching the application by accident and overwriting my registry with default user paths.
So which is the less of the two evils?
If the application directory is not available, windows media player still tries to launch the .msi for installing PD6.
If I install the application to the C: drive but the user data to the removable drive, launching the PD6 application without the user data drive will still corrupt my registry settings for a user data path.
Both these issues seem like a logical (if not easy) fix that should be done in the PD6 application and installation package. I mean really, cannot anyone tell me why windows media player is checking the PD6 application directory? Why in PD4 did we have an option control for setting the user data path from the PD4 application? Why is this option not in the PD6 application, just the installer?
I am given a choice during installation to move the user data to another non default location. Why else would this be provided if not to accommodate my kind of request to store the user data into an alternate location other than “My Document”. Certainly Palm is not trying to force the users on how to protect and store their personal data?
Post relates to: Centro (Verizon)

Source Sequence to Timeline Editing Bugs?

Hi. I'm new to PP and I've run into a couple of issues when editing from a sequence loaded into the source viewer. (i.e KEM roll style editing) I'm using 7.0.1
First problem - with the timeline set to Insert or Overwrite sequences as nests everything works fine (although i don't really see the purpose of working this way). Mostly you would want to "Insert or Overwrite as individual clips", but when i overwrite a clip the timeline ignores my in and out points which effectively means you can't do a three point edit. There's another strange bug that when you Insert the playhead jumps way off screen instead of staying at the end of the inserted clip.
Second problem - "Replace with clip from Source Monitor" and "Replace with clip from Source Monitor, Match Frame" only replaces with the nested clip, is there no way to replace with the original clip? BTW, would be great if you could map a keyboard shortcut for this command as well?

Thanks Jim.
Some more info...
Premiere Pro CC 7.0.1
Mac OSX 10.7.5 - Macbook Pro
Tried many kinds of footage, ProRes Quicktimes, H.264 Quicktimes etc
It's very consistent behaviour, happens every time.

Discoverer 3.1.42 User Edition Bug? EUL Corruption?

We have applied the 3.1.42 patchset but are experiencing some serious buggy behaviour.
The worst problem appears in User Edition if a Parameter is used in a Calculation and there are also Totals on one or more columns. When first created, this situation may work for a while, but further manipulations usually cause the query to crash with a message like: "Internal EUL error: EULParseNodeType error in canonical formula" (apologies: I don't have the exact message in front of me here). Once that error occurs, it seems to always occur in that Worksheet when a Calculation involves a Parameter AND there is a Total declared.
Is this a known bug? Has anyone else run across this? Does the Worksheet get corrupted in the EUL?
This one problem (oh, there are several others) is causing some significant grief.
Help is appreciated.
null

I haven't seen what you are mentioning yet. However, if you create a calculation or parameter in 3.142 and one of your users still has 3.141, the user will get an error message: Invalid combination of filters or calculations, query cannot be resolved. Upgrading to 3.142 corrects this for the user.

Submit a Document on a bug workaround in metalink

Hi All,
Recently I did a workaround for an oracle bug. I'd like to publish a document in metalink for our use.
Is there is way, where i can publish it in metalink or any other technical site?
Cheers,
Kamalesh JK

Its there already in oracle forums & metalink forums. But, how about as a document in metalink?

Adjustment Brush edit bug verified by Adobe

Adjustment brush edits that turn off have been acknowledged as a "bug" by Adobe see http://feedback.photoshop.com/photoshop_family/topics/problem_with_adjustment_brush_tool_i n_adobe_camera_raw Someone on a Mac posted the same problem. From feedback to my post, I had thought it was just a Windows 7 problem.
Problem is more serious than my post on Oct.16. I have discovered it is more than a Preview issue. An Adjustment Brush edit that is (momentarily) not showing in ACR 7.2 or 7.3 will not be carried over to Photoshop when you update the file into PS CS6 as a Smart Object. So you made multiple Adjustment Brush edits (for example Exposure, Highlight and Clarity) only to discover that not all the edits made it to the Photoshop Smart Object.
See original Oct. 16 post to see screen shots provided by Noel Carboni that verify bug. http://forums.adobe.com/message/4792575#4792575 Includes specs of my Windows 7 x64 machine.

Okay, I know I'm just talking to myself here, but I wanted to leave another update. It's not nTune, (at least I don't think that had anything to do with it).
I've come to find that when I have Firefox (v3.01) open, the problem appears. With FF closed, it's gone. No other program that I've tried causes the same issue. And as far as I can tell, FF doesn't cause problems with any other software.
This is a strange problem indeed, but I guess if it comes down to having FF closed while I'm working, so be it.
Anyone have thoughts as to where the conflict is coming from?

CS3 Maximized Screen Mode - Reposition-Bug Workarounds

In Photoshop CS3, when you use Maximized Screen Mode (image window maximized to the PS workspace) with an image window that's zoomed to a level where scroll bars exist, and you switch to another image window in the PS workspace and then switch back to the original image window (let's say using Ctrl-F6 or Ctrl-Tab) Photoshop will reposition the view to the upper left corner of the image rather than leaving it where it was.
For me, this bug is 100% reproducible.
This bug is also referenced in these forums at the following topics:
http://www.adobeforums.com/webx/.3bc3bd89
http://www.adobeforums.com/webx/.3bca160f
http://www.adobeforums.com/webx/.3c0561ea
I often carefully position 100% zoom-level images & alternate between windows for detailed comparison. It's extremely frustrating to toggle back only to be at a completely different location on the image window. I found this bug so maddening that I almost abandoned CS3 for an earlier version. It's still maddening, but at least I've found workarounds which I'll share with you here:
1) after opening an image and zooming to the extent that the above bug exists (scroll-bars available), press F and then shift-F (or vice versa) to switch to a different Screen Mode and back (problem goes away *for this image only* until the Zoom level is changed significantly - at which time you must repeat the workaround.) Repeat for every image for which you'd like the position to remain stationary when alternating to other windows and back.
2) click on Screen Mode button at the bottom of PS Toolbar and choose Maximized, (even if you were already on Maximized.) This has the same corrective effect as 1), above.
3) On a "fixed" image, if you forget to "reset" the fix after changing the zoom level significantly & you "lose your place" after alternating between windows (jumps to upper left corner), you can "recover" the previously "fixed" position by returning to the previous zoom level and switching to another window and back. It returns to the previously "fixed" location instead of the bug-altered PS chosen location of upper left corner!
4) Use a Screen Mode other than Maximized & this issue never occurs.
Adobe, this *really* should be addressed and corrected. I'd think this is much more serious than the "sticky menus" bug of CS2 that was fixed.
Reported to Adobe using their Bug Report form...

Yes!!! This works. Thank you. I hope it does not continue to recur. I would like to know what caused this in the first place. I never use the paint bucket tool. I often use the fill tool, though, sometimes with black as the foreground color.

Video/audio editing bug in Media Encoder

I have a large MOV file that contains multiple film
presentations, one after the other. They are separated by a few
seconds of dead air. I'm using Video Encoder's built-in edit tool
to slide to the end of a presentation and then export that to FLV.
Using my arrow keys, I can pinpoint the exact millisecond I want it
to stop.
However, when I export these to FLV files, audio (but not
video) continues to play for several seconds even past the point at
which I had set the cutoff.
I tried duplicating the same thing using Flash 8 Video
Encoder, and didn't have a problem. It only appears to be an issue
with Flash CS3 Video Encoder.
Can anyone duplicate what appears to be a bug?

Screenshot of Premiere Export (fills screen):
Screenshot of Media Encoder export: (notice the pillar-boxing)

Digital editions bug

Digital editions provides you with an ability to move back and forth between pages by using the CTRL+G and CTRL+SHIFT+G key combinations. Unfortunatly, this combination doesn't work, instead it provides you with same functionality as if I pressed CTRL+F, i.e. Find.
When I click Next/Previous in the Reading menu, it works just fine, its the key combinations that doesn't work.
Anyone seen this issue? Have a solution?
Thanks.

Ctrl-G and Ctrl-Shift-G should move you back and forward on a find (Ctrl-G is Find Next/Ctrl-Shfit-G is previous), but as Ric noted this a known bug (currently fixed internally). There are two other ways to do this. One as you noted is through Previous and Next on the Reading Menu. The other is to use the two buttons next to the right of of the Find control of the toolbar.
However if all you want is just keyboard navigation through the text there are quite a few other key combinations documented on our
help page. One of the more useful set for reading is scrolling up or down by a page, which can be down with the right and left arrow keys respectively.
Jim Lester
Adobe Systems

Editing bug + workaround

Similar Messages

Maybe you are looking for