EDITING FILEPATH THEN SAVING DATA

Hi all, i would like to create a new file that includes a few user paramters such as username, test type, date, serial number. I am having trouble creating the file before it can save to it.
I have attached it for your perusal.
Cheers
Grant
Attachments:
Save to file.vi ‏55 KB

Just an quick example of creating new directory
If base directory = C:\
and directory2create (single-level)= C:\IFK
Directory folder of IFK will be created in C:\ upon running this VI
LabVIEW 7.0
Regards,
Ian F
Since LabVIEW 5.1... 7.1.1... 2009, 2010
依恩与LabVIEW
LVVILIB.blogspot.com
Attachments:
IFK_FIO_Check Directory Existance_npw1.vi ‏65 KB

Similar Messages

Edit Object then saving back causes the object to move??

Hi,
I'm using Acrobat X 10.1.6 updated today. When editing PDF documents by right clicking then selecting "Edit Object", I get my usual Illustrator window pop up, change my colour or whatever, Save, back to Acrobat, and the object in question moves! This has only started happening recently and I have been using Acrobat daily in my job, as a PrePress operative, since Acrobat 7 Professional and never had this issue.
Please advise what is causing the object to move?! I have re-installed Acrobat today and re-updated and no change. I also have several colleagues on various versions of Acrobat ranging from 9.5.3 to 10.1.6 who cannot replicate this issue, even on the same PDF file?
Many thanks in advance.
Tom.

Re-installing Illustrator seemed to work, even though it was fully up to date and now technically it's not, it works better now. I guess I'll be pausing the "updates" from now on.
Thanks!

When editing an image in Photoshop from Lightroom then saving it back to Lightroom, how do i get the image to go back and sit next to the original? Mine is going to the end of the folder. Thanks Karen

When editing an image in Photoshop from Lightroom then saving it back to Lightroom, how do i get the image to go back and sit next to the original image? Mine is going back to the end of the folder. Thanks Karen

Hi Karen
You may the sort set to Custom. Click the dropdown menu on the toolbar (to the right of the word sort) and change to capture time.
If you can’t see the toolbar above the filmstrip press the T key. Press T again to hide.

Lost 2500 photos last night. Mt wife cut and paste a photo into power point for editing. then saved it as a photo. Now in iphoto there is just this one photo and the other 2500 have gone. Where have they gone???????

Lost 2500 photos last night. Mt wife cut and paste a photo into power point for editing. then saved it as a photo. Now in iphoto there is just this one photo and the other 2500 have gone. Where have they gone???????

To answer some basic questions posted to aid people in helping me. These are
I believe it is version 11 of iphoto as i tried to update but it says it has the latest update and Mac is 2 weeks old from new.
OS is Lion.
I have just tried to look everywhere on the Mac to see where the photos might be.
There are no error messages showing on screen and it was fine before my wife did what she did. Even though we have back -ups of 95% of the pictures. I would like to know what happened so that it won't happen again.

When editing a template and making changes then saving and closing I get this error any idea?

Have a user who is on Sharepoint office 365 online and when trying to center a excel spreadsheet icon link to center on a organizational report template then saving and closing the user receives this error:
An expected error has occured
Trouble shoot issues with Microsoft Sharepoint foundation
Correlation ID 0952719c-af2e-20a4-9ee6-e98b1a457d0a
Any clue what this error indicates?
Best regards, Joe C Partner Online Technical Community ----------------------------------------------------------------------------------------- We hope you get value from
our new forums platform! Tell us what you think: <a href="http://social.microsoft.com/Forums/en-US/partnerfdbk/threads">http://social.microsoft.com/Forums/en-US/partnerfdbk/threads 
</a>------------------------------------------------------------------------------------------ This posting is provided "AS IS" with no warranties, and confers no rights <hr>

Any ideas? And Melbourne is right SP 2013 online would be impossible to view those logs unless I open a ticket with MS
Best regards, Joe C Partner Online Technical Community ----------------------------------------------------------------------------------------- We hope you get value
from our new forums platform! Tell us what you think: <a href="http://social.microsoft.com/Forums/en-US/partnerfdbk/threads">http://social.microsoft.com/Forums/en-US/partnerfdbk/threads 
</a>------------------------------------------------------------------------------------------ This posting is provided "AS IS" with no warranties, and confers no rights <hr>

If Records of different list items are entered, then the data is not getting inserted in the table.

Hi Everyone,
A Very Very Happy, Fun-filled, Awesome New Year to You All.
Now coming to the discussion of my problem in Oracle Forms 6i:
I have created a form in which the data is entered & saved in the database.
CREATE TABLE MATURED_FD_DTL
ACCT_FD_NO    VARCHAR2(17 BYTE)               NOT NULL,
CUST_CODE     NUMBER(9),
FD_AMT        NUMBER(15),
FD_INT_BAL    NUMBER(15),
TDS           NUMBER(15),
CHQ_NO        NUMBER(10),
CREATED_DATE DATE,
CREATED_BY    VARCHAR2(15 BYTE),
PREV_YR_TDS   NUMBER(15),
ADD_FD_AMT    NUMBER(15),
DESCRIPTION   VARCHAR2(100 BYTE),
P_SAP_CODE    NUMBER(10),
P_TYPE        VARCHAR2(1 BYTE)
The form looks like below:
ENTER_QUERY     EXECUTE_QUERY     SAVE     CLEAR     EXIT
ACCT_FD_NO
CUST_CODE
FD_AMT
FD_INT_BAL
PREV_YR_TDS
TDS
ADD_FD_AMT
P_SAP_CODE
P_TYPE
CHQ_NO
DESCRIPTION
R
W
P
List Item
There are 5 push buttons namely ENTER_QUERY, EXECUTE_QUERY, SAVE, CLEAR, EXIT.
The table above is same as in the form. All the fields are text_item, except the P_TYPE which is a List_Item ( Elements in List Item are R, W & P).
The user will enter the data & save it.
So all this will get updated in the table MATURED_FD_DTL .
I am updating one column in another table named as KEC_FDACCT_MSTR.
and
I want this details to get updated in another table named as KEC_FDACCT_DTL only if the P_TYPE='P'
CREATE TABLE KEC_FDACCT_DTL
FD_SR_NO                NUMBER(8)             NOT NULL,
FD_DTL_SL_NO            NUMBER(5),
ACCT_FD_NO              VARCHAR2(17 BYTE)     NOT NULL,
FD_AMT                  NUMBER(15,2),
INT_RATE                NUMBER(15,2),
SAP_GLCODE              NUMBER(10),
CATOGY_NAME             VARCHAR2(30 BYTE),
PROCESS_YR_MON          NUMBER(6),
INT_AMT                 NUMBER(16,2),
QUTERLY_FD_AMT          NUMBER(16,2),
ITAX                    NUMBER(9,2),
MATURITY_DT             DATE,
FDR_STAUS               VARCHAR2(2 BYTE),
PAY_ACC_CODE            VARCHAR2(85 BYTE),
BANK_CODE               VARCHAR2(150 BYTE),
NET_AMOUNT_PAYABLE      NUMBER,
QUATERLY_PAY_DT         DATE,
CHEQUE_ON               VARCHAR2(150 BYTE),
CHEQUE_NUMBER           VARCHAR2(10 BYTE),
CHEQUE_DATE             DATE,
MICR_NUMBER             VARCHAR2(10 BYTE),
PAY_TYPE                VARCHAR2(3 BYTE),
ADD_INT_AMT             NUMBER(16,2),
ADD_QUTERLY_FD_AMT      NUMBER(16,2),
ADD_ITAX                NUMBER(16,2),
ECS_ADD_INT_AMT         NUMBER(16),
ECS_ADD_QUTERLY_FD_AMT NUMBER(16),
ECS_ADD_ITAX            NUMBER(16)
So for the push button 'Save' , i have put in the following code in the Trigger : WHEN BUTTON PRESSED,
BEGIN
     Commit_form;
          UPDATE KEC_FDACCT_MSTR SET PAY_STATUS='P' WHERE ACCT_FD_NO IN (SELECT ACCT_FD_NO FROM MATURED_FD_DTL);
          UPDATE MATURED_FD_DTL SET CREATED_DATE=sysdate, CREATED_BY = :GLOBAL.USER_ID WHERE ACCT_FD_NO = :acct_fd_NO;
IF :P_TYPE='P' THEN
     INSERT INTO KEC_FDACCT_DTL
          SELECT FD_SR_NO, NULL, MATURED_FD_DTL.ACCT_FD_NO, FD_AMT, INT_RATE, P_SAP_CODE,
               GROUP_TYPE, (TO_CHAR(SYSDATE, 'YYYYMM'))PROCESS_YR_MON,
               FD_INT_BAL, (FD_INT_BAL-MATURED_FD_DTL.TDS)QUTERLY_FD_AMT , MATURED_FD_DTL.TDS,
               MATURITY_DATE, P_TYPE, NULL, NULL, (FD_INT_BAL-MATURED_FD_DTL.TDS)NET_AMOUNT_PAYABLE,
               NULL, NULL, CHQ_NO, SYSDATE, NULL, 'CHQ', NULL, NULL, NULL, NULL, NULL, NULL
          FROM MATURED_FD_DTL, KEC_FDACCT_MSTR
     WHERE KEC_FDACCT_MSTR.ACCT_FD_NO=MATURED_FD_DTL.ACCT_FD_NO;
END IF;
COMMIT;
     MESSAGE('RECORD HAS BEEN UPDATED AS PAID');
     MESSAGE(' ',no_acknowledge);
END;
If P_TYPE='P' , then the data must get saved in KEC_FDACCT_DTL table.
The problem what is happening is,
If i enter the details with all the records as 'P' , the record gets inserted into the table KEC_FDACCT_DTL
If i enter the details with records of 'P' and 'R' , then nothing gets inserted into the table KEC_FDACCT_DTL.
Even the records with 'P' is not getting updated.
I want the records of 'P' , to be inserted into table KEC_FDACCT_DTL, even when multiple records of all types of 'P_Type' (R, w & P) are entered.
So, can you please help me with this.
Thank You.
Oracle9i Enterprise Edition Release 9.2.0.1.0 - Production
Oracle Forms Builder 6i.

Its not working properly.
At Form_level_Trigger: POST_INSERT, I have put in the following code.
IF :P_TYPE='P'THEN
INSERT INTO KEC_FDACCT_DTL
SELECT FD_SR_NO, NULL, MATURED_FD_DTL.ACCT_FD_NO, FD_AMT, INT_RATE, P_SAP_CODE,
GROUP_TYPE, (TO_CHAR(SYSDATE, 'YYYYMM'))PROCESS_YR_MON,
FD_INT_BAL, (FD_INT_BAL-MATURED_FD_DTL.TDS)QUTERLY_FD_AMT , MATURED_FD_DTL.TDS,
MATURITY_DATE, P_TYPE, NULL, NULL, (FD_INT_BAL-MATURED_FD_DTL.TDS)NET_AMOUNT_PAYABLE,
NULL, NULL, CHQ_NO, SYSDATE, NULL, 'CHQ', NULL, NULL, NULL, NULL, NULL, NULL
FROM MATURED_FD_DTL, KEC_FDACCT_MSTR
WHERE KEC_FDACCT_MSTR.ACCT_FD_NO=MATURED_FD_DTL.ACCT_FD_NO;
END IF;
MESSAGE('RECORD HAS BEEN UPDATED AS PAID');
MESSAGE(' ',no_acknowledge);
It worked properly when i executed first time, but second time , in database duplicate values were stored.
Example: First I entered the following in the form & saved it.
ACCT_FD_NO
CUST_CODE
FD_AMT
FD_INT_BAL
PREV_YR_TDS
TDS
ADD_FD_AMT
P_SAP_CODE
P_TYPE
CHQ_NO
DESCRIPTION
250398
52
50000
6000
0
600
0
45415
P
5678
int1
320107
56
100000
22478
3456
2247
0
45215
R
456
320108
87
50000
6500
0
650
0
21545
W
0
In the database, in table KEC_FDACCT_DTL, the ACCT_FD_NO:250398 with P_TYPE='P' record was inserted.
ACCT_FD_NO
P_TYPE
250398
P
But second time, when i entered the following in the form & saved.
ACCT_FD_NO
CUST_CODE
FD_AMT
FD_INT_BAL
PREV_YR_TDS
TDS
ADD_FD_AMT
P_SAP_CODE
P_TYPE
CHQ_NO
DESCRIPTION
260189
82
50000
6000
0
600
0
45415
P
5678
interest567
120011
46
200000
44478
0
4447
0
45215
R
456
30191
86
50000
6500
0
650
0
21545
W
56
In the database, in the table KEC_FDACCT_DTL, the following rows were inserted.
ACCT_FD_NO
P_TYPE
250398
P
250398
P
260189
P
320107
R
320108
W
There was duplicate of 250398 which i dint enter in the form second time,
All the other P_TYPE was also inserted , but i want only the P_TYPE='P' to be inserted into the database.
I want only those records to be inserted into the form where P_TYPE='P' and duplicate rows must not be entered.
How do i do this???

Report prints Saved Data not Refreshed Data

We were running VS 2005 and using the Basic CR 2005 Basic that comes with it. We upgraded to use CR 2008 and found MANY issues after we went live in production that were apparent in the development. This has caused a lot of stress with us as well as our users. Iu2019ll summarize everything we found, possible workarounds and the open issues including the Printing/Loading of Saved Data.
First, it was reported that printing changed. It turns out when PrintMode = u2018PDFu2019 (default setting) it now asks after you choose u2018EXPORTu2019 (use to be u2018OKu2019) that it asks to Open or Save the Adobe. When our customers were running 20 some reports at a time and we had hundreds of users, this became a nuisance for the heavy reporting users and a training issue in general for us. With research, I found that we can change the PrintMode to be u2018ActiveXu2019. This was much better when we were testing. However, in Production it became a nightmare. If the user is on a Domain that disallows itu2019s user from installing software or if the user has tight security settings, this became a nightmare.
The second thing reported was that it was exporting to the wrong format. It was exporting into RPT format. It turns out with CR2008, it automatically defaults to RPT and the new pop-up, doesnu2019t isnu2019t clear to the user they even have a choice (the pop-up is much prettier, but it doesnu2019t look like a dropdown anymore). In addition, they reported it was taking twice as long to export (we think it was related to export file type now). With CR2005 Basic, it would have no default selection and if the user didnu2019t pick one, it would remind them they need to pick one. After much research, I found there is no way to customize the operation of the export without writing my own export. My users 90% of the time want to export to PDF and Excel the rest of the time. Since we arenu2019t using a CR Server like product, they NEVER will do RPT. There is no way with CR2008 to limit this list or to default the File Format. So now, if they forget to select the type, they get the wrong file format instead of being reminded to select one. Since the new pop-upu2019s dropdown selection isnu2019t easily apparent, this was a BIG issue for us. Since I have close to 300 reports on 7 websites, this will be a lot of work for me to write my own code and change all the ASPX page to use my own control.
The third thing reported was that the default name on Exporting was changed. Export uses the ID property of the Crystal Report Viewer as the default name of a file on export. When it replaced the viewer on all our pages, it set the ID to CrystalReportViewer1 instead of preserving the original ID. We now have to go back and change them to what we wanted manually. BEAWRE of this! For our power users who wanted to export 40 reports they now have type the name in manually on all of them. What took minutes now takes over an hour for them to do, until we can fix all the pages.
Now it was reported that some reports are showing OLD data. It turns out there shows Saved Data from design time. In our site, we have a parameter page which getu2019s user selected parameters, save to a session and then load the report page using the session variables, and then redirect them to the report page which on page load we set the reports parameters. We use the CrystalReportSource using ODBC. The report has all the connection information. Well if the user happens to select the same parameters I used at design time, it wonu2019t pull the data from the database. They see our test data instead which is garbage. If they select different parameters, display the report and then go back and select the original parameters, they will get the correct data. This can be catastrophic for us! So I added at the beginning of the Page Load before setting parameters the following:
     If Not Page.IsPostBack Then
            CRSServiceAlertsReport.ReportDocument.Refresh()
     End If
This seemed to work. A pain to add on every report page though when it wasnu2019t necessary before. But then I just got called this morning and they say when they print, it prited the OLD data. It seems the refresh pulled new data and updated the display in the viewer but the ActiveX print still used the original Saved Data! I couldnu2019t find a solution for this. I found switching PrintMode back to u2018Pdfu2019 worked but now I have the extra click issue again, which I described above. I tried setting the reports u2018Discard Saved Datau2019 option but it still had the data!
In the end, had I known about all these issues I would have NEVER upgraded to CR2008. Iu2019m still looking for help on getting by the following:
u2022     Stop using Saved Data at runtime (either on Display or Print)
u2022     Getting the PrintMode=u2019Pdfu2019 to just pull up Adobe in Open mode without prompting the user.
u2022     Remove File Type options from Export
u2022     Set the default File Type options to nothing or something I want.
Another nice feature to have would be the ActiveX control for printing to be part of the .NET Framework so users donu2019t need to download it. Come on BO is a big company Iu2019m sure they can work with MS. 

What is that method to clear Saved Data; I looked and couldn't find it. I never had to call one in the prior version of CR 2005 Basic in .Net. With the .NET controls, it always refreshed the data before. This is a change in behavior for me.
As for the Print using Adobe, with CR2005 Basic, it didn't prompt the user to Open or Save before. This is new behavior. It used to just open the report in Adobe in memory before without this specific prompt (it did have the first prompt for All or specific pages, but it would just open after that). This is a change in behavior from prior versions and it has caused me several issues.
Many users don't like change and I didn't know to communicate this to them. They were taken by surprise. We'll learn to live it I guess, but I would ask you just to consider, why have an option to "Save" to PDF when you choose to print? I would think you would use Export if you want to save. It would never hurt to add an option to allow alternatives either.
As for including with .NET Framework, it was just an idea. I know how hard it can be working with third parties. However, given that CR Basic comes with it, I thought it may be possible to work with them. The better the integration the better the product is for the developers. I was thinking the button could call JavaScript/Java to print instead of an ActiveX, or some other method. Since I donu2019t know how the Control works, I couldnu2019t say. It just would be nice. I had a smiley face after that request, it didn't come out right when I saved the post.
I still don't understand why .Refresh will update the data in the viewer but printing using the ActiveX Control will still print the saved data instead of refreshed data. Since I never used this in the prior version I don't know what it would of done or not, but it just doesn't seem right it shows one set of data, and prints another.
In addition, why the designer still saves data with the report when you state not to, I think may be a problem still.
Edited by: Thomas Johnson on Nov 21, 2008 12:26 PM

I have created a form in InDesign, exported to a pdf, created an editable form and saved. When I open the form and make changes and save, the reopen the changes are there. If try to email this form as an attachment after editing, the attachment is alway

I have created a form in InDesign, exported to a pdf, then created an editable form and saved. When I open the form and make changes and save, then reopen the changes are there. If try to email this form as an attachment after editing, the attachment is always minus the edits. ????

Hi chuck,
If you ave created the form and then filling it yourself and saving the form, the filled data should be there when you reopen the same form.
Can you please send the form to me at [email protected] so that I can have a look.
Regards,
Rave

Saving Data from ALV.

hi all.
I have an issue regarding saving data from alv to data base table.
The problem is like this. I have an internal table consist of 10 column from three diferent tables.one primary key is there.
now i have displayed it in alv grid. there is a column of quantity. i made some changes in quantity of some rows. now i want to save it into the database table from which that quantity field fetched.
i used first check_changed_data method. if the flag is set it means data is changed.
wat shud i do to save that quantity column into data base.
Thanks In advance.
varu

Hi,
To modify database or ztable from the ALV grid,you need to do the following:
---You have to modify the field Catalog fields (fields that you want to make editable).Set the field EDIT as 'X'.For example if you want to make the field below editable:
ls_fcat-fieldname = 'CARRID'.
ls_fcat-edit = 'X'.
APPEND ls_fcat TO pt_fieldcat.
---Call the method below before you call the set_table_for_first_display.
CALL METHOD ALV_GRID_INSTANCE->set_ready_for_input
EXPORTING
i_ready_for_input = 0. ( For Display ) and ('1' for Edit )
After this put the set_table_for_first_display.
Now if the ALV data has changed,and you want to change the database or ztable,then in your pf status give a function code for SAVE button in the GUI.
In the PAI of the screen,in user command module write the following:
WHEN 'SAVE'.
call method gr_alvgrid->check_changed_data
importing e_valid = l_valid.
if l_valid = 'X'.
MODIFY spfli FROM TABLE itab_spfli.
endif.
(l_valid is a flag.
DATA:l_valid type c.
If you want to check if the user has entered any value on the grid, use the Method : CALL METHOD gr_alvgrid->check_changed_data.
This method returns a flag l_valid which can be checked to see if the data on the ALV grid has been changed or not.)
Regards,
Beejal
**Reward if this helps

Error (ORA-01403) saveing data form a report with apex_item items

Hi all,
I've a problem saveing data that's inserted into a report which I created using apex_item items. Reproducing the exact issue on apex.oracle.com will take me a lot of time, and I don't know if I really can reproduce this matter... So I hope I can explain my problem clearly enough, here...
The global story of the application is that its an application used for measureing objects. For these objects there are templates, with default properties. When measureing an object, the user must fill in those properties for the object. The report is build dynamicly, becouse each object has different properties and each property could be of an other kind (number, text, list, counter [=number field with add and substract buttons], and date). Depending on the type of the property, the report has to show an other item to fill.
The query for constructing this report is like this:
select defprop.proptyp_id,
apex_item.hidden(41,defprop.id) defprop_id,
defprop.nam,
decode(proptyp.id,
 1, apex_item.text(p_idx=>42,p_value=>''||
 decode(defprop.srt, 'CONSTANT', (select WRD
 from measurement_prop
 where defprop_ID = defprop.id
 AND measurement_id IN
 (SELECT ID
 FROM measurement
 WHERE OBJ_ID = obj.id
 AND DAT IN
 (SELECT latest_date
 from object_instance
 WHERE ID = obj.id)))
 ||'' ,p_attributes=>'class=case5_num'),
 2, apex_item.text(p_idx=>42,p_value=>''||
 decode(defprop.srt, 'CONSTANT', (select WRD
 from measurement_prop
 where defprop_ID = defprop.id
 AND measurement_id IN
 (SELECT ID
 FROM measurement
 WHERE OBJ_ID = obj.id
 AND DAT IN
 (SELECT latest_date
 from object_instance
 WHERE ID = obj.id)))
 ||''),
 3, apex_item.select_list_from_query(p_idx=>42,p_value=>''||
 decode(defprop.srt, 'CONSTANT', (select WRD
 from measurement_prop
 where defprop_ID = defprop.id
 AND measurement_id IN
 (SELECT ID
 FROM measurement
 WHERE OBJ_ID = obj.id
 AND DAT IN
 (SELECT latest_date
 from object_instance
 WHERE ID = obj.id)))
 ||'', p_query=> 'select wrd, id from property_typewrd where proptyp_id = ' || proptyp.id ||' order by vlgnum', p_show_null=> 'NO'),
 4, apex_item.text(p_idx=>42,p_value=>''||
 decode(defprop.srt, 'CONSTANT', (select WRD
 from measurement_prop
 where defprop_ID = defprop.id
 AND measurement_id IN
 (SELECT ID
 FROM measurement
 WHERE OBJ_ID = obj.id
 AND DAT IN
 (SELECT latest_date
 from object_instance
 WHERE ID = obj.id)))
 ||'',p_attributes=>'class=case5_num')
 || '<a name="add_f02" href="#"><img alt="add" src="#WORKSPACE_IMAGES#plusBig.gif"/></a> '
 || '<a name="sub_f02" href="#"><img alt="sub" src="#WORKSPACE_IMAGES#minusBig.gif"/></a>',
 5, apex_item.date_popup(p_idx=>42, p_value=>''||
 decode(defprop.srt, 'CONSTANT', (select WRD
 from measurement_prop
 where defprop_ID = defprop.id
 AND measurement_id IN
 (SELECT ID
 FROM measurement
 WHERE OBJ_ID = obj.id
 AND DAT IN
 (SELECT latest_date
 from object_instance
 WHERE ID = obj.id)))
 ||''),
 oms
 ) waarde
from default_property defprop,
object_instance obj,
property_type proptyp
where defprop.stdobjver_id = obj.stdobjver_id
and defprop.proptyp_id = proptyp.id
and obj.id = :P2200_ID_INVThis report works fine. Depending on the type of the property it shows a numberic field, text field, selectlist (with right values), counter field or date field.
If the default property is set to a 'CONSTANT' value, the last known value is filled in.
With a javascript I check the numberic field value and achieve the counterfield to add or substract values when 'plus' or 'minus' is clicked.
This javascript is placed in the field 'Execute when Page Loads' in the page properties in APEX. Here is the code:
/*Execute when page loads*/
/*Allow only numbers */
number_elem = $('input[name=f42].case5_num');
number_elem.keypress(function(event) {
if (event.which && (event.which < 46 || event.which > 57 || event.which == 47) && event.keyCode != 8) {
 event.preventDefault();
if (event.which == 46 && $(this).val().indexOf('.') != -1) {
 event.preventDefault();
//for mouse events, remove any non numeric characters
number_elem.bind('mouseup mousedown mouseleave', function(event) {
 this.value = this.value.replace(/[^0-9]/g, '');
/* Subtract Button */
$('a[name="sub_f42"]').click( function() {
number_elem = $(this).siblings('input[name=f42].case5_num');
currVal = number_elem.val();
if ( isNaN( currVal) ){
 elemVal = 0;
else {
 elemVal = Number(currVal);
if (elemVal > 0)
 number_elem.val(elemVal-1);
else
{ elemVal = 0; }
/* Add Button */
$('a[name="add_f02"]').click( function() {
number_elem = $(this).siblings('input[name=f42].case5_num');
currVal = number_elem.val();
if ( isNaN( currVal) ){
 elemVal = 0;
else {
 elemVal = Number(currVal);
number_elem.val(elemVal+1);
});Those two codes makes my report works fine. So far I'm happy. But now I want the data, which the user fills in the items, to be saved.
So I created a process that should do this for me (it wil run after the user hits a button), here is the code:
declare
 v_objmet_id number := 0;
begin
 select measurment_seq.nextval
 into v_objmet_id
 from dual;
 insert into measurment
 ( id
 , obj_id
 , dat
 values
 ( v_objmet_id
 , :P2200_ID_INV
 , :P2200_METDAT_INV
 /*Loop trough the values (g_f42 holds the value of the property)*/
 for i in 1 .. apex_application.g_f42.count loop
 /*g_f41 holds the key to the default property*/
 if apex_application.g_f41(i) is not null and
 apex_application.g_f41(i) > 0 then
 insert into measurment_prop
 ( measrument_id
 , defprop_id
 , wrd)
 values
 ( v_objmet_id
 , apex_application.g_f41(i)
 , apex_application.g_f42(i)
 end if;
 end loop;
end;After running this process, the application branches back to the page, clearing the cache and set some items I use for filtering an other report with their own values.
Both the process and the branche have a 'when button pressed' condition, where the same button is filled in. The branche fires on submit: after processing.
When I hit the button to save the data, I get an error: ORA-01403: no data found
In the debug info I can find there is encountered an unhandeled exception in the process, but I don't know what's going wrong...
I thought it could be something with the date field, I want to save, so I put it in a to_date() with the right format, but I still got the error...
I've also checked if the query which fetches the nextval of the sequence is correct, and it is, no typeing error in the sequence name, or something.
I'm using APEX 4.0.2
Edited by: Mir on 28-jun-2011 10:25
Changed some code of the javascript, it directed to the wrong item ID, now its correct

My problem is solved. The error occured when application item g_f41 was accessed, so my application couldn't find the data, the user putted in there. I now pasted this part of the sql, to the other apex_item field, so it became one field and now it works correctly:
select [...]
apex_item.hidden(41,defprop.id) ||
decode(proptyp.id,
 1, apex_item.text(p_idx=>42,p_value=>''||
 decode(defprop.srt, 'CONSTANT', (select WRD
 from measurement_prop
 where defprop_ID = defprop.id
 AND measurement_id IN
 (SELECT ID
 FROM measurement
 WHERE OBJ_ID = obj.id
 AND DAT IN
 (SELECT latest_date
 from object_instance
 WHERE ID = obj.id)))
[... etc ...]

When and how to update the "saved data" in report ?

Hi,
The BO version is "BusinessObjects Enterprise 12.0"
The case is that, some reports are uploaded withe saved data. while viewing the reports, the reports return the old data.
How to view the update data while click the "View" in CMC/InfoView ?
I have tried to schedule it , then can see the update data in "View the latest instance".
Is there any approach to refresh/update the saved data in the report ?
Thanks and regards,
Forest
Edited by: Forest lin on Dec 5, 2008 12:12 PM

Hello Forest lin,
I recommend to post this query to the [BusinessObjects Enterprise Administration|BI Platform; forum.
This forum is dedicated to topics related to administration and configuration of BusinessObjects Enterprise, BusinessObjects Edge, and Crystal Reports Server.
It is monitored by qualified technicians and you will get a faster response there.
Also, all BOE Administration queries remain in one place and thus can be easily searched in one place.
Best regards,
Falk

Edit "JPEG" then "Save As" is destructive ????

Having searched around I can't find an answer to a simple question. If I open a jpeg and edit it "with or without" layers, then flatten (In the case of layers) the image and select the "Save As" command and rename the file or select "As A Copy", will my original jpeg suffer from and adverse effects if I don't save the original file ???. I keep hearing about destructive editing and layers etc. I have tried editing the same photo three times without saving the original and the file size is the same, suggesting that its non destructive, but would like a definitive answer. Thanks in advance

Noel Carboni wrote:
Generally speaking, saving as a JPEG causes a lossy compression of the data. So as a rule, any save of a JPEG file results in degradation.
If you talk about Photoshop only, then yes. But "generally speaking": no, this is not universally true.
There are a number of modifications that CAN be done losslessly on a JPEG file (i.e. without decompressing and recompressing the data, thereby preventing a reduction of image quality due to generation loss):
rotating (lossless)
flipping (lossless)
cropping (lossless)
canvas enlarging, i.e. adding a frame (lossless)
grayscaling (lossless except for the [intended] loss of chroma information, i.e. the operation does not add jpeg compression artefacts and thus is equal to converting a color image to a grayscale image in lossless format, such as png)
editing (lossless re-saving of entire jpg image except modified MCU blocks. This comes in handy e.g. for red-eye reduction!)
MCU block rotating, flipping and moving (lossless)
Many programs are capable of lossless rotating and flipping of jpeg files, whereas the other lossless operations are less frequently found.
Photoshop is NOT capable of any of the above lossless operations.
modifications which do not change image pixels:
optimizing the Huffman tables of a JPEG file to increase compression (lossless)
converting between progressive and non-progressive JPEG format (lossless)
Note: Lossless rotating and flipping requires the image size to be a multiple of 1 MCU block (i.e. 8x8 for a jpeg image without chroma subsampling, 16×8 for 4:2:2 subsampling and 16×16 for 4:2:0) as the top and left edge of a JPEG image must lie on a block boundary. When a losslessly cropped JPEG image's bottom or right side does not coincide with a block boundary, then the rest of the data from the partially used blocks will still be present in the cropped file and can be recovered.
lossless editing (e.g. adding of text):
1) original JPEG image
2) edited + losslessly resaved JPEG image
3) comparison
white: identical pixels
black: different pixels
lossy editing in Photoshop (e.g. adding fo text):
1) original JPEG image
2) edited + saved in Photoshop
(JPEG, max. quality 12)
3) comparison
white: identical pixels
black: different pixels

Saving data on form will not save

I know I am missing something. We have a form that we use only once a year to populate data. And now when the form is open for users, they enter in the cells and hit save and then receive 'data is saved' yet the cell is blank.
As an admin I cannot save. If I use the SmartView connection I am able to populate the database.
I know this is either something security related
JTS
Edited by: jts on Jul 7, 2010 10:25 AM

Thanks all it was a combo of both. I remember now the implied sharing.
The dimension did only have one child to one parent but the form was the problem. We had idescendants on it and store on the parent and it was wiping out the data each time.
For now since it is a very unused member the parent is still at store as I check our allocation scripts but the form was switch to use the direct child.
all is good
JTS

Crossword puzzle; reload saved data problem

This might have been answered before but my searches here didn't turn up anything which worked when I tried them.
I've a crossword puzzle which has a saved function that I can't get to work properly. Right now I have the puzzle without the save button. The developer said I need to write some php code that will reload the applet with the saved data, along with some html to get the current state of the puzzle. He provided an example html code which I've adapted as seen below.
Part of the problem is the crossword html running the applet is run from a web page within my vb forum board and not located in any folder on my site. This in itself may make saving any data from the crossword impossible, but I don't know.
The html I've written, which I'll add later to the existing puzzle html code, is:
<param name="DATAFILE" value="https://my site.com/forums/crswrds/l.jpz">
 <param name="SUBMITMETHOD" value="POST">
 <param name="SUBMIT" value="https://my site .com/submit.php?data=%SUBMIT%&time=%TIME%&url=https://my site.com&username=sample&puzzle_title=Crossword">
 <param name="SAVE" value="https://my site.com/forums/view.php?pg=crswrdpuz?&progress=%PROGRESS%">
 <param name="PROGRESS" value="">
The problem is the developer said I should "write a php script to accept the %PROGRESS% string as a GET parameter, then to re-load the applet in the saved state provide it in the PROGRESS applet parameter."
I was hoping someone here had a way to reload the applet with the saved data from the $PROGRESS% string as I haven't had any luck searching these forums.
Puzzle, without save, is here , which is open to the public for the next couple of days.
Edited by: nanaimobar on Apr 21, 2008 1:25 PM

I'm not applet programmer, so this may not be the best way, but I'd look into serialization. It seems like it would be easy enough to save the "model" object to a file and then send that back and forth from the applet to the server. You could request the serialized file from the webserver, and then reload your model from that file. After that you just have to update your view, and you're set.

Error while saving date value in Java dictionary

Hello Everybody,
I got following error while saving date value in one of the fields of the Java table.
Internal error occured in submit request: Error in method updateRequestContact : The object of type java.sql.Date with the value '2005-12-04 08:00:00.0' assigned to host variable 9 is not normalized. It must not contain time components in the time zone running the virtual machine.
I can't find why it is taking time value in the date object.
This value is coming from the RFC as a date value, and I am saving this value in Java dictionary table.
Same code for this was working fine earlier. But, now suddenly it gives error like this.
Even if I provide date on the screen from webdynpro application, this date value can't save in the Java dictionary and gives same error.
What should be the problem behind this?
Regards,
Bhavik

Hi Satyajit,
I am getting date value from the screen of the webdynpro application from date picker control and passing this value in Java dictionary.
More Information:
I have dat value in the Date object: target_date
But Now I have made new Date object as following:
Date target_Date1 = new Date(target_date.getYear(),target_date.getMonth(),target_date.getDate());
Then I am passing this object to Java dictionary. Still it gives same error.
Then I have changed code as following:
 int l_year;
 int l_month;
 int l_days;
 l_year = target_Date.getYear();
 l_month = target_Date.getMonth();
 l_days = target_Date.getDate();
 Date target_Date1 = new Date(l_year,l_month,l_days);
Now it works for me.
But I guess this is not the perment solution. It looks very strange. I have used so many date objects at various palces. So, this solution is not the final for me.
I want to findout the main cause of it.
One more thing: This code was working for a mornth or two. But, now suddenly it is giving this error.
Please help me if anybody knows.
Regards,
Bhavik

EDITING FILEPATH THEN SAVING DATA

Similar Messages

Maybe you are looking for