Editing List Values
I'm editing a drop-down list of sequential items that refer
to sequential URLs that are relatively long and are very similar
except for an incremented digit. When I call up the "List Values"
edit box in the properties panel, right-click and menu copy/paste
are disabled and the view of the URL is really truncated and
un-expandable.
I was able to edit the item pretty easily by going into the
code directly, but that menu is a real pain. I can't believe it's
so ill-considered, so I figure I must be doing something wrong,
right?
Might be best to edit in code view. It's pretty to decipher
for list values.
Walt
"nickej" <[email protected]> wrote in
message
news:g8hp4i$to$[email protected]..
> I'm editing a drop-down list of sequential items that
refer to sequential
> URLs
> that are relatively long and are very similar except for
an incremented
> digit.
> When I call up the "List Values" edit box in the
properties panel,
> right-click
> and menu copy/paste are disabled and the view of the URL
is really
> truncated
> and un-expandable.
>
> I was able to edit the item pretty easily by going into
the code directly,
> but
> that menu is a real pain. I can't believe it's so
ill-considered, so I
> figure I
> must be doing something wrong, right?
>
Similar Messages
-
How to get metadata option list values derived from a table/view using SOAP
I am writing an ASP.NET application that replicates some of the features of the SCS search interface. I have looked at the GET_DOC_METADATA_INFO service and its SOAP output. It has a few missing pieces of information, like the option list values for a field if that fields values are derived from a separate table/view. Some of the fields I am dealing with also make use of Dynamic Control Lists (DCL). Is there a way to get the DCL info using SOAP? I did notice that the dOptionListKey element contains the name of the view from which the option list values will be derived. However, I cannot find a service that takes the view name as a parameter to return the option list values. I have looked in the services reference manual, but I have not had any luck finding what I am looking for.
TIA
- Tyson
Message was edited by: Add the word 'get' to the subject.
TysonHello,
What error you are getting? You code seems to be ok. I have tested below code and working fine
XPathNavigator rTable = MainDataSource.CreateNavigator();
String ddlSectionSelectedValue = Convert.ToString(rTable.SelectSingleNode("/my:myFields/my:ddlSection", NamespaceManager).Value);
One think you can check that keep dropdown value display name and id same.
Hemendra:Yesterday is just a memory,Tomorrow we may never see<br/> Please remember to mark the replies as answers if they help and unmark them if they provide no help -
Calendar Year variable is not showing listed values
Hi,
I have a query which I am running based on the standard variable ( 0CALYEAR ) input. When I run first time it shows the list of values in the selection editor and displays the result. But after executing when I am trying to change filter values in the output, it doesn't show list values as well if I enter manually, I am not getting the result. I am getting out put no data available....
I created new variables on 0CALYEAR info object, but same problem. My query structure is
In rows I just defined Calendar Year / Month ( so that I can get all months for that user entered Year ).
In Columns I defined one Key Figure.
Thanks
Ganesh Reddy.
Edited by: Ganesh Reddy on Mar 8, 2012 8:39 AMProblem is resolved my self. Removed 0CALYEAR from Char Restrictions to Default.
Thanks
Ganesh Reddy. -
User should not be able to edit characteristics Value
Hi Friends
I have requirement where in a user creates a document with Two characteristics assigned to that Document.
Say CHAR1 and CHAR2.
When he creates DIR , He assigns value to these characteristics
CHAR1 = 666454
CHAR2 = 55333
No I want No other user to be able to change the values assigned to both CHAR1 and CHAR2.
Can this be possible.
With Regards
Mangesh PandeHi Mangesh,
I think the easiest way to find an authorization object which prevents users to edit characteristic values would be to made an authorization trace in transaction ST01. For further information please see the following link:
http://wiki.sdn.sap.com/wiki/display/PLM/AuthorizationTrace-+ST01
This trace lists all checked authorization objects and you should be able to identify a suitbale object for restricting edit permission for classification values.
Best regards,
Christoph -
Error becuase of MEMBEROF list value
Hi,
I am managign the memberof attribute in AD. In my user provisioning workflow I am setting the value of this memberOf attribute to a list of AD groups. <append>
<list>
<s>DN for Group1</s>
<s>DN for Group2</s>
</list>
</append>This works without a problem in the workflow, I can see the users being added to the groups in AD and all is well.
However when I
1. go the IdM Admin Page
2. open the user in edit mode
3. Click on Attributes tab
4. Click on Save button (does not matter if I change anything)
On the table showing all the changes that are being made to different resource, I see the value for the member of attribute as
OLD VALUE = [DN for Group1, DN for Group 2]
NEW VALUE = DN for Group1, DN for Group 2 (without [ ]).
When I click on save it throws an LDAP error that says something like ' .. Unwilling to perform operation..'. I thing this is because the update is tryng to update the LIst value of MemberOf attribute to a string value (DN for Group1, DN for Group 2). Any ideas on how I can prevent this.Hi Nikhil,
The problem you are facing is due to inability of the Tabbed User Form to handle multi-valued attributes in the 'Attributes' tab. Since everything is a text field, such attributes are converted to comma-separated strings. You would need to convert them back to <list> when you click 'Save'.
See thread "Custom TabbedUserForm to include multi select field", I have posted the code you could use to handle your situation: http://forum.java.sun.com/thread.jspa?threadID=5124010&tstart=0
Adi. -
hi friends,
i generated a list and now i need to change the values in the list, and then this changes should be seen in database, could anyone could help meHi,
use : write ... format input on.
Re: how to change the list values
http://help.sap.com/saphelp_47x200/helpdata/en/9f/dba46435c111d1829f0000e829fbfe/frameset.htm
A.
Message was edited by: Andreas Mann -
DRM Function to divide comma delimited string to list value
Hi
Any one knows how to seperate comma delimited string into list values.
ThanksAre you wanting to dynamically set the list values for a property? If so there are a couple options:
1. You can update them via the API.
2. You can write a sql script to update the table Property_List. This requires an application server restart and generally isn't recommended for support reasons but it makes sense in some instances.
Edited by: Naren Truelove on 16/02/2011 22:08 -
Toystore: Custom TextField Renderer - can this be applied to list values?
If you use a list value with a Binding Container and the Struts Validator it behaves similar to the discussion in the toystore notes (the original value is lost - resets to the model value). Can your same idea in toystore be used to fix it for list items, and if so, how? (I'm trying by applying a PickList renderer on numbers but not getting anything working).
Thanks for help!!Hi,
If SharePoint were to enforce uniqueness on a column in a list where users are only allowed to see and edit list items that have created, then you could have a scenario where -
a. user1 tries to add a new item to the list which violates the uniqueness constraint
b. SharePoint reports an error
c. user1 gets to know that there is another item containing the same value in this list
d. this violates the security settings that you configured (each user should be allowed to only see the items that they have created). Now if you change the permissions settings to allow users to SEE all items, but only
edit items that they have created, this error disappears (obviously).
Now getting to the workaround you mentioned (creating a unique constraint on the SQL Server table). This is not going to be possible for numerous reasons -
a. Modifying (or for that matter, even performing SELECT operations on) the SQL Server tables is an unsupported operation and it will definetely break other things in SharePoint, not
to mention that you will lose all support options from Microsoft. However if you don't care about this, then it will still not be technically possible because...
1. SharePoint does not create a new SQL Server table for every list/library.
2. If you did get around to enforcing a unique constraint in the one single table that SharePoint uses for all lists, then you will be enforcing this constraint on each and every list in all the sites and in all the site
collections that are assigned to that content database.
Please "Mark as Answer" if a post has answered your question or "Vote as Helpful" if it was helpful in some way. Here's
why -
Edit list of workbooks portlet defaults
How to set the parameter of 'List of workbooks Filter list by' when editing list of workbooks portlet defaults so that the porlet just shows the workbooks of Discoverer according to the Filter condition?
You need to enter the value without % or quotes.
-
Can a list item be editable...I have populated a list item using a record group.The user should be able to edit the values in the database using this list item.It is a poplist.
you want to edit the data which is shown in the list item?
if you select the data from a table to show it in the list-item, then you have to update the data in this table. Create a form, which you use for this lookup-table and update the data through this form... -
Not able to edit the value options in LKM
Hi
I have recently upgraded to ODI 11g .
In that we are not able to edit the value options in LKM.
(i.e.. editor window is not appearing, not able to edit the text.
Please let me know the solution .
ThanksWe were using JDK1.6.0_29 and it was not supporting ODI 11.1.1.5, so we have uninstalled the JDK1.6.0_29 and reinstall the JDK1.6.0_11.This solves our issue.
Thanks a lot!! -
I'm using TestStand 2.0/Labview 6i to do a string value test. Is there any way to use a string variable in the edit string value test instead of an actual string?? This forces you to hard code a string to test against.
Hi ART,
You can also use the LimitLoader step to load your string into to step similar to the Numeric Step type.
There should be an example of this in the Resource Library | TestStand
Regards
Ray Farmer
Regards
Ray Farmer -
List value retaining in Share point hosted app 2013
I'm creating a Share point hosted app.
I have a list inside Share point 2013 app. We are inserting records into the list through some other forms in app.
But when we deploy the app, it is getting retracted & deployed again. So the list values are getting deleted.
Is there any way to retain the Share point app list values during deployment?
I tried the following things as suggested by some experts in internet.
• Setting up the app catalog for app in Central admin and increment the version for every deployment.
• I set the “deployment conflict resolution” property of list instance to “none”.
But both the things not working.
Please help me on this issue.Hi,
According to your post, my understanding is that you wanted to keep the list data while redeploy the app project.
As you had known, to keep the data in the app, we should first set up the app catalog.
Then we should upload your app with version 1.0.0.0. Install app to the desired web.
After some code modification increment your version to 1.0.0.1 and upload again your app to catalog.
Upgrade your installed app. More details about updating
http://sharepoint.stackexchange.com/questions/83021/app-deployment-keep-the-existing-data-in-internal-list-of-an-sharepoint-app
Thanks & Regards,
Jason
Jason Guo
TechNet Community Support -
Bug editing list Items using webpart connections ,group by and inline editing
Hi Everyone. I came across a bug using out of the box features.
Let me explain well the details to reproduce the error. I used :
*2 Lists :
-List one : the consumer list with two columns :
-Number column
-Choice column
-List two :
The sender list with one column :
-Lookup column to gets the number column on the consumer list
*A webpart Page
*2 listviewwebparts in the webpart page
*Connect webparts to filter by the lookup column/number column
*Add inline editing in the consumer webpart
Till now everything works perfectly, inline editing works fine. Let's add some more view details :
*Add a group by in the view of the consumer webpart (group by the choice column)
=> Try to edit list items, you will notice that inside a group, inline editing is OK and inside another group it doesnt work!
If you get the same error, that would be nice to find where is the problem (I already found a similar bug and the problem was the sorting that needs to be in the same way for both connected webparts , ASC or DESC). But this one... ???Hi Static,
According to your description, I create the consumer list and sender list, create a webpart page , add a chioce filter webpart and consumer list webpart. But after I add a group by in the view of the consumer webpart, the inline edit still work fine.
You can have a look at the blog:
https://support.office.com/en-ca/article/Connect-a-Filter-Web-Part-to-a-List-View-Web-Part-4f3f6c10-0a1b-479d-8b4d-c4f1bf49bb3f#bms3
Thanks,
Eric
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Eric Tao
TechNet Community Support -
How to change the form widths for the EditForm.aspx and NewForm.aspx files that display both new and edited list entries?
Hi ,
According to your description, my understanding is that you want to modify the width of the New Form and Edit Form of a list in SharePoint 2010 .
1.Go to your SharePoint site -> your list.
2.In top ribbon click List tab(List Tools).
3.Towards right you will see option as Form Web Parts, click on it, the three forms will be listed there [New Form, Display Form, Edit Form].
4.Select the one on which you want to increase the width/height.
5.It will open in edit mode, click on Add a Web Part.
6. Click on Forms [Categories] => HTML Form Web Part.
7.After adding the HTML Form Web Part, click on Edit WebPart.
8.Click on Source Editor, Remove all code from it and put an empty HTML table with width and height as per your requirement ex. to increase width
<TABLE WIDTH="800px">
<TR><TD></TD></TR>
</TABLE>
9.Save the form and check out your respective modal by clicking on the same in your list view.
Reference:
http://sharepoint.stackexchange.com/questions/40580/how-to-modify-width-of-standard-dialog-form-sharepoint-2010
Best Regards,
Eric
Eric Tao
TechNet Community Support
Maybe you are looking for
-
How do I get my contacts back after restoring and syncing?
I had updated my IOS to ios5. It stopped in the middle of retoration. I sync and got my apps back but my contacts are gone. How do I get them back?
-
I purchased an app off of iTunes and it doesnt work.
So i got a iPod Touch 32GB today for Christmas. I went to the iTunes store and downloaded a game called Goat Simulator. It was compatible with my device and i downloaded it and everything went smoothly. So after i waited, i launched the game. After w
-
No longer able to control speakers via keyboard on my Mac Pro 13 after Maverick install
Mac Pro 13 unibody mid 2010 updated to Maverick awhile ago and now notice I seem to have lost the laptop keyboard controls for off, vol up and down Hmmmm Tried various setting but nada. Anyone have a clue?
-
How to upgred the software of mac mini 2009?
I have mac mini 209/march I want to up gred it's software can some one help me??
-
Urgent regarding conversion of BLOB to Text
Hi All Can anybody give me an idea of how to convert a medical bill which in BLOB format to a text format. Please mail me at [email protected] thanks in advance Ms.Srikanthan