Editing session gets canceled
I am starting an editing session programmatically, so clicking outside of the cell being edited does not stop the session.
But even when I have resizableColumns="false" sortableColumns="false" if I move a mouse with a left button down over a column separator the session gets canceled.
How can I get rid of this effect?
Thanks
Well, funny enough, but that's exactly what I want: clicking anywhere outside of the grid does not end the editing session.
Tell me then please, what would the proper way of achieving such effect be?
Thanks
Similar Messages
-
Report gets cancelled or terminated after eight hours
While doing load testing of reports, all of my reports got cancelled or terminated after eight hours. I bang the report server and database with 30 long running reports using RWCGI60. The rwcgi60/showmyjobs shows that all are running for 8 hours and after that boom... all gets cancelled one by one with in a five minute period. I still see the SQL session activity on database. The report server log says the server engines are crashed one after the other. I have Maxengine set to 15. When I submit 30 reports I see 15 running and 15 enqueued.
Is there any timeout parameter set on RWCGI60 where by it lost contact of database? RWCLI60 works fine and finished all reports.
Thanks and Please let me know if you further information...Hi
The timeout is a seeting in http server on which you host Reports CGI. Once that time limit is reached and no output is written, the web server would time out for that request. Reports CGI does not have any timeout parameter property.
Thanks
Rohit -
On a Mac, in Adobe Photoshop CC 2014, when adding audio to an edit, i get the message "Could not complete your request, because Dynamiclink is not available".
When performing the exact same operation in Adobe Photoshop CC, i can add audio in the same way, no error message. Any ideas to solve this, anyone? Would be greatly appreciated.I tried to update and it keeps telling me to get the Application Manager. And this is what happens
Adobe Application Manager failed and it told me to download the Adobe Support Advisor.
Adobe Support Advisor told me that there was an issue:" cpsid_82829s1: "A restart is pending," bootstrapper error has occurred. "Token Number: 40-87772-063201122012
I followed the instructions it gave me to correct this issue:
If you receive the error "Installer has detected that a machine restart is pending. It is recommended that you quit the installer, restart try again," do the following:
#Restart the computer and try the installation again.
#If the installation fails, delete the InProgress registry key:
Disclaimer: This procedure involves editing the Windows registry. Adobe doesn't provide support for editing the registry, which contains critical system and application information. Make sure to back up the registry before editing it. For more information about the registry, see Windows registry information for advanced users on the Microsoft support site, or contact Microsoft.
Launch Windows Registry Editor.
(Windows XP) Choose Start > Run, type regedit in the Open text box and click OK.
(Windows Vista/ Windows 7) Choose Start, type regedit in the Search box, and press Enter.
Navigate to HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Session Manager.
Delete the InProgress key.
I was not able to find the "InProgress" key. -
LANDSCAPE FETCH job gets cancelled
Hello Guru's,
The LANDSCAPE FETCH job gets cancelled on solution manager system due to the below mentioned error and in order to fix it
we have already applied the SAP note 1335225 but, the issue still persists.
Right now, we have come across the SAP note 1108071 which says the job will get cancelled "if you made adaptive computing
settings in SMSY and the SLD is not accessible".
can any one help me with how to check the adaptive computing settings in the header data of the system.
Also, the SLD check from system via tcode:sldcheck is sucessfull and we could access the SLD via browser. Please find the
details below.
Properties of RFC destination SAPSLDAPI
RFC host:
%%RFCSERVER%%
program id: SAPSLDAPI_MP0
gateway host:
gateway service:
Testing the RFC connection to the SLD java client...
RFC ping was successful
SLD server access settings:
host name: ashb01wa06pr.global.aes.com
port number: 59000
user : SLDAPIUSER
Use transaction SLDAPICUST if you wish to maintain the SLD server access d
Launching the SLD GUI in a separate browser window...
=> Verify in the browser GUI that the SLD is in a healthy running state!
Calling function LCR_LIST_BUSINESS_SYSTEMS
Retrieving data from the SLD server...
Function call returned exception code 3
=> Check whether the SLD is running!
Immediate reponse is highly appreciated
Best Regards,
S.ViswanathanHello,
Could you include the Landscape_fetch error you mentioned in your message?
I think the issue is still your SLD. At the bottom of SLDCHECK it tries to retreive business systems in SLD.
If it is successfull you will see something like:
Calling function LCR_LIST_BUSINESS_SYSTEMS
Retrieving data from the SLD server...
Function call terminated sucessfully
List of business systems maintained in the SLD:
yoursystem1
yoursystem2
yoursystem3
(more...)
Your SLD check shows that it cannot retrieve systems from the SLD:
Calling function LCR_LIST_BUSINESS_SYSTEMS
Retrieving data from the SLD server...
Function call returned exception code 3
=> Check whether the SLD is running!
Please make sure that you have configured your SLD according to the post-installSLD setup and configuration guide. If you still have problems, follow this toubleshooting process...
http://help.sap.com/saphelp_nw70/helpdata/EN/78/20244134a56532e10000000a1550b0/frameset.htm
Best Regards.
Edited by: Phil May on Sep 2, 2009 10:31 AM -
When sales order get cancelled
Hi Gurus
Please explain the process when sales order is created for 10 QTY and production order released for 10 qty and all operations confirmed for 5 QTy & moved to FG remaining 5 no qty is in WIP, so then sales order get cancelled, and got another new sales order with different specifications with same qty.
now i want convert the cancelled sales order qty to new sales order qty
please explain me step by step
with Regards
Laxmipathi.G.VHi
Anyway you were doing the Activity confirmation for the 5 quantities at the operation stage.
so the component only consumed for this production .when you check the material document for the particular confimation . you can see the component was consumbed. ( 261 movement)
So you do the reverse the confirmation at the operation stage CO13 . and you can reverse the components back to the production storage location back. (movement type 262)
Edited by: raj on Jun 8, 2009 8:11 AM -
Query works in Report but not during Edit session
I have a report based on an SQL query, and it works perfectly from the menu in Development. It's also in Test and Production, and it works there, too. I want to change the template it's on, so I went in through the Navigator to open up and change the report. The Edit session opens up to the query, but I cannot move to any of the other tags, because it says the query is "not valid".
It won't allow me to save the query 'as is', because it supposedly isn't valid. The report isn't locked, and prior versions (I went back to view five of them) have the same trouble. How can the query work off the menu, but not be 'valid'? We installed a patch recently, but even so, why would the query work in one spot and not another?
Anyone have any ideas on what I can do?
Pat MurrayHi,
Please give me the query and the error the error you are getting.
Thanks,
Sharmila -
SAP Back ground Jobs getting cancel automatically
Hi All,
All schedule Background jobs getting cancel automatically in ECC 5 server. Also not getting any job log in respective schedule job. please help me out with expert suggestions.
Regards
Gyan1)Are the bgd workprocess free in the system currently?Check if there are any long running jobs holding them.
Bgd Work process are free but with error code 373,223,007 etc for all 5 bg wp
error reports from work directory as per work process:---
wp 22 :Fri Sep 25 15:07:04 2009
A
A ABAP/4 Program SAPLSYDB .
A Source LSYDBU27 Line 7.
A Error Code DBIF_DSQL2_DEFAULT_CR_ERROR.
A Module $Id: //bas/640_REL/src/krn/runt/abexsql.c#5 $ SAP.
A Function DsqlErrorHandler Line 1986.
A COMMIT/ROLLBACK error on "DEFAULT" database connection..
A
M ***LOG R68=> ThIRollBack, roll back () [thxxhead.c 12289]
C Rollback Work (0)
M *** ERROR => ThCallHooks: event handler rsts_before_commit for event BEFORE_COMMIT failed [thxxtool3.c 252]
B ComRolHook(BEFORE_COMMIT, free_all) failed
B db_con_commit received an error return code in before-commit action
M ***LOG R38=> ThICommit3, db_commit98 ( 001024) [thxxhead.c 12036]
WP23: Fri Sep 25 15:06:05 2009
B dbtran INFO (init_connection '<DEFAULT>' [MSSQL:640.00]):
B max_blocking_factor = 50, max_in_blocking_factor = 255,
B min_blocking_factor = 5, min_in_blocking_factor = 10,
B prefer_union_all = 1, prefer_union_for_select_all = 0,
B prefer_fix_blocking = 0, prefer_in_itab_opt = 0,
B convert AVG = 1, alias table FUPD = 0,
B escape_as_literal = 0, opt GE LE to BETWEEN = 0,
B select * =0x00, character encoding = STD / []:X,
B use_hints = abap->1, dbif->0x1, upto->0, rule_in->0,
B rule_fae->0, concat_fae->0, concat_fae_or->0
M ***LOG R68=> ThIRollBack, roll back () [thxxhead.c 12289]
C Rollback Work (0)
M *** ERROR => ThCallHooks: event handler rsts_before_commit for event BEFORE_COMMIT failed [thxxtool3.c 252]
B ComRolHook(BEFORE_COMMIT, free_all) failed
B db_con_commit received an error return code in before-commit action
M ***LOG R38=> ThICommit3, db_commit98 ( 001024) [thxxhead.c 12036]
wp 24:Fri Sep 25 14:33:10 2009
M *** ERROR => ThCallHooks: event handler rsts_before_commit for event BEFORE_COMMIT failed [thxxtool3.c 252]
B ComRolHook(BEFORE_COMMIT, free_all) failed
B db_con_commit received an error return code in before-commit action
B ***LOG BZY=> unexpected return code 32768 calling DBACDS [dbacds#2 @ 1225] [dbacds 1225 ]
B
*WP25: *** ERROR => BtcCleanUp: BtcLgAp-call failed (rc = 4) [btcjcntl.c 1308]*
M ThCallHooks: call hook >ITSP: EndOfSession< for event BEFORE_SESSION_CANCEL
M ThCallHooks: call hook >RtmClearSession< for event BEFORE_SESSION_CANCEL
M ThCallHooks: call hook >HttpClearSession< for event BEFORE_SESSION_CANCEL
M ThCallHooks: call hook >SpoolHandleHook< for event BEFORE_SESSION_CANCEL
M ***LOG R47=> ThResFree, delete (001009) [thxxmode.c 1284]
M ThCallHooks: call hook >ASTAT-collect commit handling< for event BEFORE_COMMIT
M ThCallHooks: call hook >rsts_before_commit< for event BEFORE_COMMIT
M ThCallHooks: call hook >rsts_after_commit< for event AFTER_COMMIT
M ThCallHooks: call hook >ThNoClearPrevErr< for event AFTER_COMMIT
M ThCallHooks: call hook >SpoolHandleHook< for event AFTER_COMMIT
M ThCallHooks: call hook >SAP-Trace buffer write< for event BEFORE_TASK_SWITCH
M ThCallHooks: call hook >ImcResetPtr< for event BEFORE_TASK_SWITCH
M ThCallHooks: call hook >DbgBeforeTaskSwitch< for event BEFORE_TASK_SWITCH
M ThCallHooks: call hook >HttpResetPtr< for event BEFORE_TASK_SWITCH
B
B Fri Sep 25 14:47:04 2009
B Disconnected from connection con_da={R/3*WORKFLOWTRACE,26000006,1}
please let me know where i can send log file if req.
2)Check for the sm21/sm50 bgd wp traces.
Getting so may Tem se management errors.
Some TemSe objects are stored in files. To do this, a path name is set up from the TemSe object name. To be able to use this path, TemSe management requires a directory. It attempted to create it itself. However, this did not succeed.
3)Check if the filesystem is full as you suggest no logs are being written.
File system having free space
4)Check if the user who has scheduled the job is locked ?
user unlocked
please help me to resolv this issue.
thanks
Gyan
Edited by: Gyan Prakash on Oct 9, 2009 10:02 AM -
Job SM:EXEC SERVICES gets cancelled with SYNTAX_ERROR
Hi,
The job which refreshes Service sessions (for Early Watch Alerts) in SolMan 4. gets cancelled with the message:
Syntax error in program "RDSVASAEA_ROOT_____________050 ".
I performed a syntax check on the program in the ABAP Editor and it gives the following result :
Field "BDLDLTRHOSTS001030" is unknown. It is neither in one of the
specified tables nor defined by a "DATA" statement. "DATA" statement.
Can you let me know, how to solve this problem.
My system is SolMan 4.0 SP 15 on Win 2003 with Oracle 10.2.
ST-SER and ST-ICO are with the latest support pkg level,
Regards,
Anil.These steps can be done easier as of Support Package Stack 15:
>
Amit Devale wrote:
> Step 1:
> Run report BDL_DELETE_ALL_TABLES via SE38 to delete all entries
> in the service definition tables
>
> Step 2:
> Execute a 'Refresh service definitions' task session in transaction
> SDCCN ->Task ->Create ->'Refresh service definitions'
>
> Step 3:
> Execute in transaction SE37 the function module "BDL_GENERATE_LOGFUNC
> _INCLUDES" and enter the value "ALL" in the 'OPTION' field.
Hi Amit,
Support Package Stack 15 of SAP Solution Manager does contain an update of SDCCN (shipped within ST-PI 2005_1_700 SP06.
[SAP Note 727998|www.service.sap.com/sap/support/notes/727998]
This offers an easy way to update the service definitions and to generate the logfunc Includes.
Step 0: Ensure that optimizer statistics exist for table D010INC.
Step 1-3 :You can use functionality in SDCCN to execute these steps.
Perform:
- Path: SDCCN -> Utilities -> Maintain Service Definitions
- Select 'Delete and Replace Service Definitions -> Confirm this selection
- Confirm that you want to delete the definitions
- Confirm that a new task 'Service Definition Refresh' was created
(Take a note of the task id -> Review the log for this task id when it is completed)
You should not not see any errors for either the update of a Service Definitions table or the generation of any re-import include.
Best regards,
Ruediger
P.S.: Great, that you start to share your rich experience here in SDN. -
Inactive Sessions Getting Automatically Generated in Database
I am facing a strange problem of getting huge number of inactive sessions getting generated th the database server which leads to it's connection closure.
The Error reads as "Failed to check out an Application due to connection failure of Application Module."
This happens each time I execute the following code:
String amDefName = "amendprgo.model.CSDInvFRCAmendPrgoServices";
String configName = "CSDInvFRCAmendPrgoServicesLocal";
ApplicationModule app1 = Configuration.createRootApplicationModule(amDefName,configName) ;
String voInstanceName="prgoHdrRO";
ViewObject prgoHdrROVO =app1.createViewObjectFromQueryStmt(voInstanceName,"select * from INV_PRGO_HDR");
prgoHdrROVO.setWhereClause("PRGO_ID="+tempRow.getAttribute("PrgoId")+" and DEPOT_CD = '0' and ITEM_CAT = 'I3' ");
prgoHdrROVO.executeQuery();
if(prgoHdrROVO.getEstimatedRowCount()>0){
return true;
I know there is a process of creating connection and View Object in Model part in JDeveloper, but I want to know why this problem happens.ApplicationModule app1 = Configuration.createRootApplicationModule(amDefName,configName) ;is your problem as it causes at least one (sometimes more) connections to open. As you don't free the resource after using it the connection remains open even if you can't access it anymore.
You should call Configuration.releaseApplicationModule(...), with the application module you created before returning.
On the other side you shoulnd not even call createRootApplicationModule in the first place (as it causes trouble if you don't deeply know what the framework do with a root application module).
Can you tell us the use case which make you call createRootApplicationModule()? We might find a better solution.
Timo
Edited by: Timo Hahn on 19.05.2011 13:45
PS: something to read http://blogs.oracle.com/jdevotnharvest/entry/when_to_use_createrootapplicationmodule_in_oracle_adf and http://radio-weblogs.com/0118231/2009/08/20.html#a959 -
Systemd/user: tmux sessions get killed when stopping systemd session
Following the wiki guide on systemd/user, I am now starting my X sessions using systemd unit files for my user.
My problem: when I quit X or exit the systemd session (for example through $ systemctl --user exit), my tmux sessions get killed along with it. Note, I do not start tmux with unit files, but simply through invoking “tmux” in a virtual terminal. I have also tried detaching the tmux session before quitting the systemd session, but to no avail.
How can I make my tmux sessions survive X closing?That is beacuse tmux becomes a child process of the systemd --user session. So it gets caught up in the cgroup and everything. What I have done is I start a system service of tmux as my user (I have creatively come up with the name "[email protected]"). Here is what I've got, that has been working for me:
% cat /etc/systemd/system/[email protected]
[Unit]
Description=Start detached tmux session
After=multi-user.target
Before=shutdown.target
[Service]
Type=forking
User=%I
WorkingDirectory=%h
ExecStart=/usr/bin/tmux new-session -d -s %u
ExecStop=/usr/bin/tmux kill-session -t %u
Restart=always
[Install]
WantedBy=multi-user.target
Last edited by WonderWoofy (2013-04-27 22:35:27) -
Job E2E_HK_CONTROLLER getting canceled daily after EHP1 upgrade
Hi, All,
We upgraded solman system to EHP1.Since then; this job is getting canceled daily with following error:
Job Log:
Job started
Step 001 started (program E2E_HK_CONTROLLER, variant , user ID SMD_RFC)
Internal session terminated with a runtime error (see ST22)
Job cancelled
ST22 Dump log shows time out dump
Current patch level is 04
Kindly suggest how can this be solvedHi,
Details are:
Runtime Errors TIME_OUT
Date and Time 07.01.2010 01:30:54
Short text
Time limit exceeded.
What happened?
The program "SAPLRRSI" has exceeded the maximum permitted runtime without
interruption and has therefore been terminated.
What can you do?
Note down which actions and inputs caused the error.
To process the problem further, contact you SAP system
administrator.
Using Transaction ST22 for ABAP Dump Analysis, you can look
at and manage termination messages, and you can also
keep them for a long time.
Error analysis
After a specific time, the program is terminated to make the work area
available to other users who may be waiting.
This is to prevent a work area being blocked unnecessarily long by, for
example:
- Endless loops (DO, WHILE, ...),
- Database accesses with a large result set
- Database accesses without a suitable index (full table scan)
The maximum runtime of a program is limited by the system profile
parameter "rdisp/max_wprun_time". The current setting is 3600 seconds. If this
Roll.... 16192
EM...... 594970672
Heap.... 0
Page.... 16384
MM Used. 585663104
MM Free. 9274032
r and Transaction
Client.............. 100
User................ "SMD_RFC"
Language Key........ "E"
Transaction......... " "
Transactions ID..... "4B446D5B2E061DFFE10000003630905C"
Program............. "SAPLRRSI"
Screen.............. "SAPMSSY1 3004"
Screen Line......... 2
Information on caller of Remote Function Call (RFC):
System.............. "PS1"
Database Release.... 701
Kernel Release...... 701
Connection Type..... 3 (2=R/2, 3=ABAP System, E=Ext., R=Reg. Ext.)
Call Type........... "synchron and non-transactional (emode 0, imode 0)"
Inbound TID.........." "
Inbound Queue Name..." "
Outbound TID........." "
Outbound Queue Name.." " -
Triggering a job when the first job gets cancelled...
From BMV0, we can trigger a job once the first job is completed using the 'After Job' option. Can u tell me if its also possible to start another job when the first job gets cancelled ?
Message was edited by: Sushma Anuprava
Message was edited by: Sushma AnupravaHi,
Go to the database view V_OP and check for the column 'STATUS' which gives the background job status , based on value from this column (cancelled status ) , start the new job with FM : 'JOB_START' .
Regards
Appana -
Session gets hanged when breakpoint is set, else works properly.
Hello Experts,
I am expierencing that when i activate the breakpoints in my source code, my sessions gets hanged up.But when i remove the same breakpoint , i get to see the output. I have all the rights , and i use to debug till this last week.
Can anyone help me in this issue.
Thanks in advance.
SwapnilHi, Waghmare
Please Check your GUI version and Patch Level i think problem is with your GUI
Follow Steps Bellow
--> Press ALT + F12
--> From the menu Select About from here you can Check the Version and Patch Level
Regards,
Faisal
Edited by: Faisal Altaf on Feb 1, 2010 3:12 PM -
[svn:fx-3.x] 12119: Fix edit sessions in TextInputs yet again.
Revision: 12119
Revision: 12119
Author: [email protected]
Date: 2009-11-23 13:08:32 -0800 (Mon, 23 Nov 2009)
Log Message:
Fix edit sessions in TextInputs yet again.
QE Notes: None
Doc Notes: None
Bugs: SDK-23397
Reviewer: Corey
API Change: No
Is noteworthy for integration: No
tests: checkintests mustella/components/DataGrid
Ticket Links:
http://bugs.adobe.com/jira/browse/SDK-23397
Modified Paths:
flex/sdk/branches/3.x/frameworks/projects/framework/src/mx/controls/DataGrid.asSimilar issue here...
More or less the same system:
# yaourt -Q | egrep "fluxbox|firefox|roxterm|xorg-server"
local/bin32-firefox 18.0.1-1
extra/firefox 18.0.1-1
extra/fluxbox 1.3.3-1
local/fluxbox-styles dayly-1
community/roxterm 2.6.5-1
extra/xorg-server 1.13.1-1 (xorg)
extra/xorg-server-common 1.13.1-1
extra/xorg-server-utils 7.6-3
I've noticed that sometimes while running firefox (either with or without flash), I get a new feature like oldies windows and then the X goes 100% of one of the cpucores.
Just pressing alt+tab it stops... but the fluxbox banner remains there (wherever I have the mouse while I'm pressing alt+tab).
Is strange that We're using fluxbox...
I've seen this new feature on my laptop and on my desktop with Nvidia & intel cards (everything else on the Arch system is the same)....
I'll launch the xrestop and see if there's something there...
Also I've tryed to build&use fluxbox from sources and I get the same feature. -
Premiere Pro CS5 - Peak files regenerating in the middle of edit session...
Peak files generate at the beginning of edit session as expected. Then unexpectedly get peak files generating during the edit session. I notice the file names for the peak files generating are the same files that were loaded upon opening the edit session.
What are the potential causes of this?
Intermittent drive failure?? Premiere Pro issue??
Thanks.
HughIt happens somtimes for some people. I don't think a finite cause is known at this time. The general recommendation is to use only internal drives, no network storage and no externals.
Maybe you are looking for
-
Text Elements not working in report program
Hi Friends, I had created a new Text-element in my report program while i execute the program my text element is not displayed. but if i use the exiisting element then it is displaying correctly. For Ex: There are Text-Elements like E01: Error S01:
-
Airplay won't show video of movie downloaded from itunes, only sound
i just got a new ipad mini. upgraded the OS. downloaded movie from itunes. video won't play on the tv, just the sound plays on the tv. my other ipad is not having this problem. The IOS of the ipad has not been updated. The appletv did just do any u
-
Asp server behavior in dreamweaver 5
HI Is there any way to get extentions for recordset server behavior and insert record behavior for asp for dreamweaver 5
-
Does anyone know if there is a standard smart form for Certificate of Analysis (sapscript QM_QCERT_01)? Or has someone developed one that they would be willing to share? I am new to smartforms and in need of help.
-
Do new internal HDs show up as separate?
Despite trying to wait for a new tower DESIGN, I need to bite the bullet and purchase a new tower. I intend on adding two of the WD 1tb drives (http://eshop.macsales.com/item/Western%20Digital/WD1001FALS/). When I do so, will all three drives (includ