Editing uneditable regions on template using CS4

I am updating an existing website using CS4.(I'm new at this) I went into the template made changes & saved it. None of the changes show up on the web pages. The update dialog box did not show up when I saved the changes. When I went into the Asset file under templates there were none showing up. But the template file is under the local files. Obviously I'm missing something. Please help.

I'll save the original poster some trouble.
Here are seven common mistakes that will result in changes not propagating from Template to child -
1. Rename the Templates folder
2. Move the Templates folder to some other folder level in the site other than root level
3. Move a template out of the Templates folder.
4. Make changes to an editable region of the Template (which will not propagate)
5. Assume that Template changes will be effected by just uploading the changed Template file to the server without also uploading the changed local files
6. Corrupt the site cache so that the link between Template and child page is broken
7. Improperly create your child pages by simply opening the Template, adding page specific content, and resaving the Template with an *.html extension rather thanits *.dwt extension. (you can tell if this is the case by looking at the code on a child page - if you see anything like <!-- TemplateBeginEditable... then this is what you have done). If you *have done this*, then recreate the child pages (in DW) using FILE | New > Page from Template, select the Template and click CREATE.
The 6th problem can be repaired by using SITE | Advanced > Recreate Site Cache, and the six others can be fixed by just not doing them. Have you done any of those?
Or, read this -
http://www.adobe.com/go/dd83ba8b

Similar Messages

Editable/Uneditable Region (Template)

Hi,
I am using dreamweaver to design my personal website. I need some help please.
I created a template and designed some pages based on it. I have two editable regions in the template. I want to change one of them to uneditable.
Could you please tell me how to do it?
Thank you for your help.
Ray

Hi,
here is an ADOBE tuorial, where you will find some hints how to "Insert a non-editable optional region" or "Insert an editable optional region":
http://help.adobe.com/en_US/Dreamweaver/10.0_Using/WScbb6b82af5544594822510a94ae8d65-7aa9a .html#WScbb6b82af5544594822510a94ae8d65-7aa8a.
And "make an editable tag attribute uneditable":
http://help.adobe.com/en_US/Dreamweaver/10.0_Using/WScbb6b82af5544594822510a94ae8d65-7aa2a .html
The links are a little bit long, hope you will see them!
Hans-G.

Unable to edit header regions of template

I have just recently taken over the whole editing etc, publishiing , admin of some websties. i have purchased contribute CS5. I was previously using Contrbute 4, which allowed me to edit the whole of the pages'header, body etc..' however, whereas the consultant adminsitrator allowed me to edit the header regions, I now do not seem to be able to do this in CS5. Is it because the administrator has done something to stop me or am I missing some vital bit of info. I can edit the content. The old administrator is acting as if I never could do this and says I need to use Dreamweaver, which I dont have and didnt need it before, I have open the index page in dreamweaver and I still find that I am unable to edit the header and it appears to be try to access an included file, it is trying to access Templates/base.dwt trouble is this does not exist among the files, any idea's why this might be so or is there some trick to editing the headers now that I am missing, cheers in addvance
dustin

Hi Dustin,
You can edit the existing template in the Dreamweaver as for you requirement, by creating connection to that site in Dreamweaver.
While saving the template, Dreamweaver will prompt you, asking for updating the pages using this template. You can update all the pages using that template. So then changes you did in the template will be reflected in those pages.
For example, if you place the Header part in Editable region and save the changes and update in all the pages, then when you edit those pages, the header part will be editable.
Hope this helps you.

Edit optional region in template

I need to edit an optional region in a template so that by
default the value is "false" for the given region.
So to do this I:
- select the region
- in the 'Properties' window CLICK 'edit'
- select the 'basic' tab
- UNCHECK the 'show by defailt' box
- CLICK 'OK'
Unfortunately this does nothing. The template does not seem
to have been altered at all. If I go back in to edit the same
region the box, which I DEFINITELY unchecked, is CHECKED again.
Anyone able to offer some insight, please?
Ideas and thoughts welcome.
Cheers
H

this doc really helped
http://www.adobe.com/cfusion/knowledgebase/index.cfm?id=tn_16347
as it highlights the fact that you can go into the code in
the <head> tag and change the following (for example) case of
'true' to 'false':


Not sure why the 'edit' option in DW wasn't working

Can't Delete Non-Editable Region in Template?

Well, I can in existing templates but if I create a new one from an existing page using "Save as Template", when I try to delete a non-editable region in the template, DW won't let me. I don't know why. Aaaargh!
It's my understanding I should be able to edit anything in a template. I've tried existing DW and restarting. I've tried using other pages as a basis for the template. Every template I create won't let me delete non-editable regions. I'm highlighting the non-editable region and pressing the delete key. I can't delete.

burro_mail wrote:
Not sure DW is doing what you describe...
But I am certain you could remove the region in code view.
Even if you are a WYSIWYG-er and not a big code-head, it should be pretty easy to remove the region markers and everything between them...
Trust me, it is. I'm wondering if the problem is associated with the fact that the source page that I saved as a template was based on a template? I just noticed that this new template refers to another template. I'm thinking that means the other template is controlling what I'm trying to do in the current template.
That's it. I just tried saving a template under a different name (still retaining the correct template file extension) but did not do the save as template. Now I can completely edit that template. So you if you save a page that is controled by a template, as a template, that new template is controlled by the previous template.
I've got a headache now.

How can we add multiple editable region in template

Hi,
My issue is when I am going to create a new template I want to add multiple editable region in template and I want to use those editable region per page wise so that in page editor I will add different text for each page for those editable region.
I can use incontxt editor to change those area for different pages although is it possible to use online editor to add different text for different pages.
I also have a plan to solve the issue ... that is also not working.
Plan is .. if we can use tag (not the default one in template), want to use different tag like {tag_headding},{tag_sidebarcontent} in template so that we can use those tag in template and fill the field in the page online editor, so when differnt page we will create we will fill those field for those tag and that will show in the front view of the site.
Please help me. I am really stuck on this issue.
Thanks in advance.
Projjwal

Hi Projjwal,
Yes, if you look at many of the commercial BC templates available the way they are getting around it is with Content Holders and multiple templates.
Now I know you will say that multiple templates is high maintenance ..... not if you use Content holders for both recurring content and unique content.
Think of Conent Holders as 'Includes' ... I have been doing it this way with templates that I build from scratch as well. Easier than you think.
And that way the client can change content such as footer information or whatever that appears on all pages without editing the template itself.
Only drawback is that if you are using Design View in Dreamweaver the content holders don't render. But other than that Content Holders are awesome.
Brad

How to delete editable regions and template?

Hi everybody,
I posted this question earlier in the web discussions area, being unaware of a forum specific to Dreamweaver. Sorry for posting in two different places.
For the past week, I have been learning Dreamweaver CS4 from an online tutorial. I got to the place where I generated a template (index.dwt) from the main page (index.html) and created some editable regions on it. At that point, I realized that I had done all the steps by rote and did not actually absorb what I was doing. I wanted to delete the template in order to repeat the steps and gain a better understanding of the process. When I tried to delete the editable regions (modify-templates-remove editable regions), I was unable to do so because "remove editable regions" was greyed out. Nor was I able to delete the html code. I tried to delete the template itself, but when I did that, the index.html page retained those editable regions! Can anyone tell me if there is a way to get back to the place I was in before creating the template?
Thank you for any assistance.

All you need to do is detach the index.html file from the template. Then you can delete the template and start all over.
Go to the Modify menu --> Templates --> Detach from Template

Is there any way to edit an uneditable region and still keep it uneditable?

I have a hobby site: http://www.grantbarker.com
I've just got into Facebook and Google+ and I've added a couple of share this site buttons in my main menu. The main menu is linked to a template so that any changes propogate to the other pages. I'm not much of a coder. I'd like the Facebook and Google+ buttons on each page's menu to simply have that pages url to share (share this page, not site). This means that I need them to be different on each page, but I'd like the menu itself to propogate from my template.
The menu is more important and I don't mind adjusting the Facebook and Google+ button code by hand.
How would you do this? Is it possible to break into the uneditable region via the code screen to hack the page, so to speak?
Thanks for any advice.
(I'm not sure if it's possible to have the actual 2 buttons themselves independent from the menu's uneditable region.)
Have a good day. I must get ready for work. Will check back this evening.

Sorry, I didn't maybe word it correctly?
I already use a template for the main menu (plus other regions) on all of my 60 pages.
If I want to change just a couple of things on some of the menus on some of the pages, but keep most of the menu the same, is it possible to hack into the code on some of the pages, just to change a few small details?
I realize that using the template will propogate to all of my child pages. I just want to be able to also add a few extra changes to some of those child pages when necessary.
EG. Imagine I was a dentist. I want all of my 60 patients to have the same mouth and exactly the same set of teeth, but a few of them I would like to also have special fillings on their teeth.
I wonder if it is possible to open a few of the child pages in code view and make a few small cosmetic changes to the code when necessary.
When I update my main menu with the template it will update all of the child pages as expected. Then I'd like to hack a few of those pages to make tiny changes to those menus.
Sorry, if I'm not explaining myself so well.
Thanks for any advice.

Are Editable Regions Required to Use Contribute

I have a website that was not developed with Contribute editable regions and templates. Instead we used server side includes and my client wants to use Contribute to edit everything but the SSI. Is this possible? And no, I would prefer not to have to go back and create templates/editable regions on this site with many pages.

If no Dreamweaver Template is set at all, they should be able to use Contribute to edit every html page that renders properly in the browser when accessed via a URL typed into Contributes the location bar.. (Or used to, I havent tried this in ages.)
Anyway, however, this has a tendency to get really messy. You got no way to control what theyre doing, Contributes editing functions are limited and they or Contribute might screw up your code in the process (like unsupported attributes, script code, getting nuked etc.).
If you got a DW template defined and locked and no editable region exists, then all Contribute users would be locked out from editing pages.
I love Contribute, but in a situation like this, I would probably vote against using it. At the very least, wrap your main content area in one single editable region...
Maybe you might want to grab a trial of Contribute CS5 and check it out as soon as it gets available in May and work with a backup copy of your site to see for yourself.

Can I create a template and that will allow me to add a region when i use i

Is it possible to create a template that will allow me to add a region when i use the template on my pages? I have a region that allows the user to create content in the region, but now i would like to have another region next to it.
thanks
Angie

You cannot add regions on a page that uses a portal template.

Reformatting editable region on template.

I have several pages created off a template that has an editable region. I want to reformat the editable region in the template, such as adding a new DIV, creating borders on it, and adding an image placeholder.
When I do this, the pages created from the template don't change also.
If I remove the editable region from the template, put in the format changes, then put the editable region back in, then all the pages I had created earlier lose their content.
Is there a way to do these format changes, make them flow through to the dependent pages and not lose the content on those pages?
Thanks,
Aron

Aron,
To "reformat" an editable area on a template, create the div and structure OUTSIDE the editable area. That is, "wrap" the editable area in a div and apply style via CSS. The image placeholder is something you can place in the template, but it will not update on pages that have already been created from the template. The new div will be applied on all pages, because it will not be in the editable region.
Beth

Non-trival template use

Hello
My page design has all the components in the cells of a
table. I am designing my menus/sub-menu in FW. The changing body of
each page is in all the sections of the table below the row with
the menus. I would like to lock all the sections of the table above
where the content becomes variable and use the wonderful template
ability to update all subscribed pages. The problem is even though
I can change the entire page into a template, I cant get it to make
editable the sections I want. I says "not repeating region" or asks
what tag attribute I want to make editable. What I want is the
entire section of the table, the <tr> & <td> down
to the end of the page to be fully editable. I cant see how it can
be done.
I have simulated templates using a master sub-page design
that all the pages uses, however of course this is explicit and any
change makes me change each and every link in all the pages. This
is the reason for templates, I just cant get around their
restriction. Any ideas?

> I know it is ungainly, for a number of reasons. How else
do you create
> attractive, graphical menus?
By using any of the methods listed here -
Check the uberlink and MacFly tutorials at PVII -
http://www.projectseven.com/
and the Navbar tutorial/articles at Thierry's place
http://tjkdesign.com/articles/dropdown/
Or this one (more recent article):
http://tjkdesign.com/articles/Pure_CSS_Dropdown_Menus.asp
Or to get it done fast, go here -
http://www.projectseven.com/tutorials/navigation/auto_hide/index.htm
Now - tell me again what your template question is?
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"cpanon" <[email protected]> wrote in
message
news:essbim$nm8$[email protected]..
> Hi Murry
> I know it is ungainly, for a number of reasons. How else
do you create
> attractive, graphical menus? Here
>
http://www.technologyadv.net/cpanon/index.htm
is the link to the page.
> Yes,
> when a view by source it is frightening. It would not be
a problem if I
> could
> only get the template idea to work. It would be a very
efficient
> technique if.
> Ideas/suggestion? tia.
>

Warning about uneditable region of dwt

I've run into a situation where I need to copy and paste some
sections of an existing page into the editable regions of a new
page (obviously based on a template).
After doing some cut and paste into the new document in Code
view I get a warning (when I preview in browser) that I've made
changes in an uneditable region. But if I move to Design view and
copy/paste it works fine.
I can actually go into the code in the new page, add a space
right in the middle of an editable region and get the error, but
don't get any error in Design view.
I can debug the template, but I can't figure out what could
possible cause the situation. The template looks fine and I've
worked quite a bit with it over time. Can someone offer up some
possible causes?
Tom

Tom:
This is a tough lesson that we have all stumbled over. DW
just wants valid
code, to work properly....
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"TCarp" <[email protected]> wrote in message
news:es1q8o$4i5$[email protected]..
>I am so embarrassed and once again have learned a very
basic lesson.
>
> The embarassment is that I've been given this advice
before (validate
> first)
> and, once again, forgot it. The learning is how
unpredictable errors in
> html
> and css can be.
>
> The html for the template validated. I then took the
full html for one of
> the
> pages I was having trouble with which also validated.
>
> I decided to run the css validation and....
>
> Two errors popped up: One had to do with a coding error
for border (I
> coded
> it 5px single #0F0 when it should have been 5px solid
#0F0.) The other
> had to
> do with a list-style-image which should have been
list-style-position.
>
> Here's my humbling lesson re-learned: By correcting
these two seemingly
> innocent and unrelated css errors the problem I was
having with editing in
> CODE
> and SPLIT view went away!!!
>
> I value online user forums a great deal particularly
this one. One of
> these
> days I'm going to get in the habit of doing a full
validation BEFORE
> asking for
> help.
>
> Murray, once again, thanks for reminding me what I need
to do before
> asking
> for help.
>
> Tom
>

Editing site created with template: can't see nav menu

This is potentially a stupendously dumb question but I have
never used DW templates before with editable/noneditable regions,
and I need a little guidance.
I am using DW8.
I am preparing an estimate to make some minor changes to a
website that was created using DW templates. I downloaded and saved
a few of the HTML files, the css file, the default.dwt file, and
the lbi files to my local drive so I could noodle around in there
and scope things out. The odd thing is that the navigational menu
is missing from the downloaded files. Will the answer be obvious
once I have access to the full directory of web files? I did see
code for an alternative menu for older and Mac browsers, and there
is js language instructing to "write menu to screen" if that helps.
Code for the dwt file is attached.
Thanks so much in advance

> and there is js language
> instructing to "write menu to screen" if that helps.
then the menu is probably all or partly JavaScript.
Code for the dwt file is
> attached.
"attachments" don't transfer to the newsgroup version
Alan
Adobe Community Expert, dreamweaver
http://www.adobe.com/communities/experts/

Motion quits unexpectedly during text edit on 3D text template

Motion quits unexpectedly during text edit on 3D text template. When I was trying to select 'live font' instead of 'system font'... I recently updated to snow leopard and I'm having trouble using FCP, motion... very simple procedures, it quits... what's wrong? help me out. OS 10.6.3... Motion 3.0.2
Process: Motion [4779]
Path: /Applications/Motion.app/Contents/MacOS/Motion
Identifier: com.apple.motion
Version: 3.0.2 (3.0.2)
Build Info: Motion-2025000~2
Code Type: X86 (Native)
Parent Process: launchd [146]
Date/Time: 2010-03-29 22:37:02.960 -0400
OS Version: Mac OS X 10.6.3 (10D573)
Report Version: 6
Interval Since Last Report: 16640 sec
Crashes Since Last Report: 1
Per-App Interval Since Last Report: 1082 sec
Per-App Crashes Since Last Report: 1
Anonymous UUID: F81B548F-07A4-4001-BC62-C46947ACDA76
Exception Type: EXCBADACCESS (SIGBUS)
Exception Codes: KERNPROTECTIONFAILURE at 0x0000000000000004
Crashed Thread: 0 Dispatch queue: com.apple.main-thread
Thread 0 Crashed: Dispatch queue: com.apple.main-thread
0 com.apple.LiveType.framework 0x0183defb LTContextSyncGlyph + 72
1 com.apple.LiveType.framework 0x0183e0f6 LTContextGetGlyphMetrics + 36
2 com.apple.motion.TextFramework 0x08a9f3be TXLiveFontGlyph::getLTGlyphMetrics(double, float) + 336
3 com.apple.motion.TextFramework 0x08a9f400 TXLiveFontGlyph::getLTGlyphMetrics(TXGlyphRequest const&) + 58
4 com.apple.motion.TextFramework 0x08a9f510 TXLiveFontGlyph::getPivot(double*, double*, TXGlyphRequest const&) + 32
5 com.apple.motion.TextFramework 0x08a5bf56 TXTextObject::getPivot(double*, double*, PCTimeValue const&) + 136
6 com.apple.motion.TextFramework 0x08a62bd6 TXTextObject::getTransform(OZRenderParams&, bool) const + 912
7 com.apple.motion.TextFramework 0x08a637a6 TXTextObject::getTransformedCorners(PCRect<double> const&, OZRenderParams&, OZQuad3D&) + 66
8 com.apple.motion.TextFramework 0x08a639e9 TXTextObject::getTransformedTypographicCorners(OZRenderParams&, OZQuad3D&) + 41
9 com.apple.motion.TextFramework 0x08a580a4 TXTextLayout::getRangeRegions(TXSelectionRange const&, OZRenderParams&, std::vector<OZQuad3D, std::allocator<OZQuad3D> >&, bool) + 264
10 com.apple.motion.TextFramework 0x08a5836d TXTextLayout::getHighlightRegions(OZRenderParams&, std::vector<OZQuad3D, std::allocator<OZQuad3D> >&) + 49
11 com.apple.motion.TextFramework 0x089fbca7 -[TXTextTool draw:viewTransformation:] + 649
12 Ozone 0x0052008b -[OZOnScreenControl render:viewTransformation:] + 287
13 Ozone 0x008ab566 -[OZGLViewerOSC drawTool] + 450
14 Ozone 0x00476eec -[OZGLViewer drawRect:] + 3654
15 com.apple.AppKit 0x937c00f9 -[NSView _drawRect:clip:] + 3510
16 com.apple.AppKit 0x937bed97 -[NSView _recursiveDisplayAllDirtyWithLockFocus:visRect:] + 1600
17 com.apple.AppKit 0x937bf0cc -[NSView _recursiveDisplayAllDirtyWithLockFocus:visRect:] + 2421
18 com.apple.AppKit 0x937bd2b6 -[NSView _recursiveDisplayRectIfNeededIgnoringOpacity:isVisibleRect:rectIsVisibleRectFor View:topView:] + 711
19 com.apple.AppKit 0x937be22b -[NSView _recursiveDisplayRectIfNeededIgnoringOpacity:isVisibleRect:rectIsVisibleRectFor View:topView:] + 4668
20 com.apple.AppKit 0x937be22b -[NSView _recursiveDisplayRectIfNeededIgnoringOpacity:isVisibleRect:rectIsVisibleRectFor View:topView:] + 4668
21 com.apple.AppKit 0x937be22b -[NSView _recursiveDisplayRectIfNeededIgnoringOpacity:isVisibleRect:rectIsVisibleRectFor View:topView:] + 4668
22 com.apple.AppKit 0x937be22b -[NSView _recursiveDisplayRectIfNeededIgnoringOpacity:isVisibleRect:rectIsVisibleRectFor View:topView:] + 4668
23 com.apple.AppKit 0x937be22b -[NSView _recursiveDisplayRectIfNeededIgnoringOpacity:isVisibleRect:rectIsVisibleRectFor View:topView:] + 4668
24 com.apple.AppKit 0x937be22b -[NSView _recursiveDisplayRectIfNeededIgnoringOpacity:isVisibleRect:rectIsVisibleRectFor View:topView:] + 4668
25 com.apple.AppKit 0x937bce2b -[NSThemeFrame _recursiveDisplayRectIfNeededIgnoringOpacity:isVisibleRect:rectIsVisibleRectFor View:topView:] + 265
26 com.apple.prokit 0x0005aa50 -[NSProWindowFrame _recursiveDisplayRectIfNeededIgnoringOpacity:isVisibleRect:rectIsVisibleRectFor View:topView:] + 105
27 com.apple.AppKit 0x937b9771 -[NSView _displayRectIgnoringOpacity:isVisibleRect:rectIsVisibleRectForView:] + 3309
28 com.apple.AppKit 0x9371a3ee -[NSView displayIfNeeded] + 818
29 com.apple.AppKit 0x936e36ec -[NSWindow displayIfNeeded] + 204
30 Ozone 0x00721da5 -[OZDocumentWindow displayIfNeeded] + 71
31 com.apple.AppKit 0x93714c26 _handleWindowNeedsDisplay + 696
32 com.apple.CoreFoundation 0x929a02e2 __CFRunLoopDoObservers + 1186
33 com.apple.CoreFoundation 0x9295ca1d __CFRunLoopRun + 557
34 com.apple.CoreFoundation 0x9295c0f4 CFRunLoopRunSpecific + 452
35 com.apple.CoreFoundation 0x9295bf21 CFRunLoopRunInMode + 97
36 com.apple.HIToolbox 0x912f40fc RunCurrentEventLoopInMode + 392
37 com.apple.HIToolbox 0x912f3eb1 ReceiveNextEventCommon + 354
38 com.apple.HIToolbox 0x912f3d36 BlockUntilNextEventMatchingListInMode + 81
39 com.apple.AppKit 0x936eb135 _DPSNextEvent + 847
40 com.apple.AppKit 0x936ea976 -[NSApplication nextEventMatchingMask:untilDate:inMode:dequeue:] + 156
41 com.apple.AppKit 0x936acbef -[NSApplication run] + 821
42 com.apple.prokit 0x00036ab1 NSProApplicationMain + 326
43 com.apple.motion 0x00005bb4 0x1000 + 19380
44 com.apple.motion 0x0000325a 0x1000 + 8794
45 com.apple.motion 0x00003181 0x1000 + 8577
------------ Skipping other threads and binary images ------------
Model: MacPro3,1, BootROM MP31.006C.B05, 8 processors, Quad-Core Intel Xeon, 3 GHz, 8 GB, SMC 1.25f4
Graphics: ATI Radeon HD 2600 XT, ATI Radeon HD 2600, PCIe, 256 MB
Memory Module: global_name
Bluetooth: Version 2.3.1f4, 2 service, 19 devices, 1 incoming serial ports
Network Service: Built-in Ethernet, Ethernet, en0
PCI Card: ATI Radeon HD 2600, Display, Slot-1
Serial ATA Device: WDC WD3200AAJS-41VWA0, 298.09 GB
Serial ATA Device: ST3750640NS, 698.64 GB
Serial ATA Device: ST3750640NS, 698.64 GB
Parallel ATA Device: PIONEER DVD-RW DVR-112D
USB Device: Hub, 0x05ac (Apple Inc.), 0x9120, 0xfd400000
USB Device: Apple Cinema HD Display, 0x05ac (Apple Inc.), 0x9220, 0xfd430000
USB Device: Bluetooth USB Host Controller, 0x05ac (Apple Inc.), 0x8206, 0x5d200000
USB Device: Hub in Apple Pro Keyboard, 0x05ac (Apple Inc.), 0x1003, 0x5d100000
USB Device: Apple Optical USB Mouse, 0x05ac (Apple Inc.), 0x0304, 0x5d110000
USB Device: Apple Pro Keyboard, 0x05ac (Apple Inc.), 0x020b, 0x5d130000
FireWire Device: built-in_hub, Up to 800 Mb/sec
FireWire Device: unknown_device, Unknown

hi,
I also have had many many problems with SL and the latest Final Cut Studio, many of them with fonts. I have been through all my fonts with Font Book and disabled a whole bunch of them. For me Motion 4 had problems with non standard fonts. It might even have been a problem with double byte fonts, who knows? I've just installed 10.6.3 and the fcs updates. I havent done anything major with it yet, but a very quick test showed that the usual lag when using motion projects on an fcp timeline have been fixed. Yaaayyyy! So not much help to you, but i think some of the issues can't be fixed without a full wipe clean and resore of the whole system, or hopefully a well targeted update.
adam

Editing uneditable regions on template using CS4

Similar Messages

Maybe you are looking for