Educess & Hcess Addition in Pricing Proc.
Hi Guru's
I want to Add : Educess = 2% and Hcess = 1% as two Statistical Condition types in Export Pricing Procedure.
The above two conditions will be used for reimbursement process only and will not contribute to total price of the Product.
What is the detailed procedure i need to follow?
Do i need to apply any SAP note for the above ?
Kindly give step by step procedure.
Will be Rewarded !!!
Regards
AD
Hi Abhijit,
If ECS and SECS condition types are already there and then you can use the same in the Export pricing procedure.
If not you need to configure the same in V/06 and add them to your export pricing procudure and also to TAXINN.
And also you have to add the same to Excise Default settings.
In the pricing procedure make them as statistical and it will work.
Reference:
f you want BED, Cess & SHE Cess to be calculated during transaction j1iin for exports,
Kindly use the user exit J_1I7_USEREXIT_DUTY_IN_EXPORT here pass the
field SUPPRESS_CALCULATION value as 'X' then this problem can be solved
Also refer the following help file.
If you do not want the excise duty to be calculated for a particular
transaction then you need to mark the flag supress_calculation as 'X'
This flag when left blank will trigger calculation of ED during J1IIN
When it is marked, the ED copied from billing will be left as it is.
This is documented in the below Note:
550233 Export invoice duty calculation made optional
Best Regards
SRI
Similar Messages
-
Rajesh/Sadhu= Pricing Proc. Difference between Factory and Depot Sales ?
Hi,
What is the diff. between the Pricing Proc of Factory and Depot Sales ?
CIN Version.
Regrds,
Binayak
Message was edited by:
Binayak GhoshHi,
We was into the depot sales project.We have done till excise duty.
That means,first we are created a sales order and then outbound delivery for that.So based on the outbound delivery number normally we do billing.
But here after outbound delivery we are in to assigning excise duty tothe delivery.In j1ij we have given and done all the things its working fine by FIFO method.It will first show the first procurement.We will select and this process got over.RG23D table is filled up with the values.
But after this i gone for doing billing in VF01.But when i give the delivery number,it shows the condition typea and values but it didnt show any thing about excise duty which we are giving,So can anyone plz help me in this issue.
Whether any configuration we want to do,or any thing we want to do internally.
Routine 356, which transfer this from j1ij to billing is not happening, Since it is direct procurement of traded items , excise duties need to be passed on to customer directly, Here I hope there is no point of calcualting the excise duty, Since the excise duty would have inventorised.
UTXJ condition record are maintained. -
Dear Experts
I am facing a problem in determination of the pricing procedure.
1.I have made a credit memo pricing procedure.say ZCRM
2.Made a billing type ZCR and assigned the doc pricing procedure (say M).
3. My customer pricing procedure is say 1.
3.Assigned the same procedure to my sales org , distribution channel,division ,document pricing procedure & customer pricing procedure.
I.e. XXX - 20-10-M-1-ZCRM.Still it is not able to determine my pricing proc at the time of processing in VF01.The copy control settings in VTFF are also set right.
The billing document against which i am raising a credit memo has a different pricing procedure.It is not picking my new pricing procedure but it is picking the original one.Hi
Your billing type is ZCR which is a credit memo and the DPP of that is M and your CPP is 1
Your sales area is xxxx ,20 and div is 10 and your pricing procedure determination is ZCRM in OVKK
Note PP will have 6 character so we will keep this as ZCRMXX
First of all the cycle is order say OR -
delivery ---billing that is F2 and
then credit memo request (this is a sales document type say CR) and from that it is credit memo this is the billing type say your ZCR
If the OR has RVAA01 as a pricing procedure and then F2 also has RVAA01 then your credit memo request CR will also have RVAA01
now the credit memo you are creating if it is to have ZCRMXX (hope this is your requirement) then in VTFA at your item level you should have pricing type as B (carry out new pricing)
Regards
Raja -
Hi
I am doing export document
fo this i done pricing procedure determintion as
sales area, cust.pri., doc.pric., pricing. pro.,pricing
( 1000 02 11 O 1 ZEXP PR00 )
BUT hile ceating sales oder getting eror that no ricing proc. determ.
& in note asking for 1000 02 11 A
my question is though i am doing export pricing
why system is asking for cust. pricing proc as A
regards,
raahulHi there,
There are different cust & doc pricing proc for domestic & foreign trade. For eg 1 for domestic, 2 for foreign, 3 for excise etc. Choose the relevant pricing procedure for customer & the order.
Then maintain that combination with sales area in OVKK. It will work.
Also in the SO main screen press F6 to go to the customer master. See what pricing is assigned to the customer in Sales Area --> Sales data.
Your OVKK should have the same customer pricing procedure maintained for pricing.
Regards,
Sivanand -
Addition of Pricing conditions for P.O
Hi
How to Add additional condition type to a customized pricing procedure.
Can just go though new entries or copy the existing any condition type and rename it.
Regards
RGhi
copy condition from an existing one or create it in M/06
now go to M/08 open your pricing procedure
here insert the condition as per the requirement
search on net you will get many docs (search as PRICING PROCEDURE) -
Pricing Proc & Tax Procedure link
75 0 AV 1
76 0 JADC Additional Duty 60 75
77 0 CustomsCVDEcess+Secess 60
78 0 Net amount for tax calculation 75 77
This is a part of code in my pricing procedure
I need the tax to be calculated on the ' Net amount for tax calculation'
How is it possible??
I need not want to have the price on material changed.
ie., net price on 'conditions' tab should be the material price only.
but the amt as said shud cme as base amount for tax calculation..
sapmmlearnerHi,
It seems this extraction is from Import pricing procedure.
For imports, you need not maintain any Tax code and Tax calculations. All duties maintained in Pricing only.
Umakanth R -
Creating a Invoice with reference to another invoice with new pricing proce
Hi People,
I want to raise a supplimentary excise invoice for the differential price.
I want to do it by raising a supplimentary commercial invoice with reference to the old invoice but with a new pricing procedure assigned to it.later on raise the supplimentary excise invoice with Tcode j1iin wrt the new commercial invoice.
Although i have done all the necessary configurations such as determination of new pricing procedure, Doc pricing Procedure and changing the pricing type at the copy control settings of the item category to "B".
i am unable to get the new pricing procedure when i am creating the supplimentary commercial invoice.
Can u people suggest me in this regardDear Nagabhushan
Normally for price difference, there is an order type RK for "Invoice Correction Request" which should be created in reference to F2 billing document. Based on this, you can issue credit memo (document type G2).
This being the case, you cannot create supplimentary invoice with reference to original invoice. Moreover, for all excise related adjustments, you should not use j1iin. You should run j1ih - Other adj.
thanks
G. Lakshmipathi -
Hello All,
What is the difeerence between TAXINJ and TAXINN? Which is the procedure adopted in INDIA?
What are the step wise procedures in pricing? What are the standard pricing conditions for frieght, surcharge, excise duties, VAT,
How is the taxation considered. Pls elaborate. Why is acess sequence needed?" For which condition types the acess sequence needs to be configured?
Regards,
PrasannaHi,
TAXINN -- Condition based Tax Pricing Procedure. It will apply TAX based on condition Types.
TAXINJ - Calculation based Tax Pricing Procedure .
Global Setting
Excise Registration IDs
Company Code Setting
Plant Setting
Excise Group
Maintain Series Groups
Maintain Excise Duty Indicator
Maintain Postal Addresses
Select Tax Calculation Procedure
Maintain Excise Default
Define Tax Code For Purchasing Documents
Assign Tax Code to Company Codeu2026u2026u2026u2026
Classify Condition Typesu2026u2026u2026u2026u2026u2026u2026u2026
Tax indicator maintenanceu2026u2026u2026u2026u2026u2026u2026u2026
Logisticsu2026u2026u2026u2026u2026u2026u2026u2026u2026u2026u2026u2026u2026u2026u2026u2026u2026u2026u2026u2026u2026u2026u2026u2026u2026u2026u2026u2026u2026u2026u2026 Incoming Excise Invoicesu2026u2026u2026u2026u2026u2026u2026u2026u2026u2026u2026u2026u2026u2026u2026u2026u2026u2026u2026u2026u2026u2026
Define Processing Modes Per Transactionu2026
Define Reference Documents Per Transactionu2026
Maintain Rejection Codesu2026
Specify Which Movement Types Involve Excise Invoices
Reportsu2026
Maintain SAP Script Layoutsu2026
Material Management Moduleu2026u2026
VAT Customizationu2026u2026
Set Tax Indicators for Material u2026
Set Indicators for Plant u2026u2026
Set Material Tax Indicatorsu2026
Access Sequence:
It having Conditon table . Acc. seq created with combination of condition tables. This willl assign with condtion type.
While maintaing the condition records. In Po with ref. to condition type the condition record get the values.
SAM -
Dear frnds,
I would like to know the link between Billing plan and pricing procedure...............I have prepared a milestone billing plan with a pricing procedure which has price, gym chrgs, maintenance chrgs etc..............but when i invoice for the first line item in the billing plan it calculates in a completely diff way( line item value - 51000 but invoice is billing for 1.50000......plss assit
Regards
MaddyHi,
This is because of two issues.
1.Check the Billing value in the sales order.
Goto VA03
Enter the order number.
Goto Item details-->Billing Plan.
Check the field "Billing Plan" and "%" for the first item.
The same will be flowed into billing if all the copycontrols are correctly maintained.
2.Goto VTFA T.Code.
Select your valid combination.
Click on Item.Select your Item category.Details.
Maintian "Copying requirements" as "023".
Pricing type as "D".
Pricing Exchange rate type as "A".
Price source as "Blank(Order)".
Save.
Regards,
Krishna. -
Tax cond types in pricing proce
hi friends
i am created pri pro like this
step contype from to con rec
10 pr00 1000
20 k007 10%
30 sub toatal 10 20
40 kf00 400
50 g total 30 40
actual result shoud come 1000100=1100400=1500
but my result is 1000100=1100400=1100
but my result is 1100 . frieght value 400 is taking into consideration
what is the problem please explainCondition Type:
Every element of pricing is called a Condition Type.
Every Condition Type / Element will have a standard Technical Name.
Few Standard Condition Types are:
PR00 - STANDARD PRICE
KA00 - SALES DEAL with DISCOUNT
KF00 - FRIGHT
T.Code V/06 is used to define the Condition Types.
There are around 256 condition types given by the Standard SAP System.
For our pricing configuration we can choose our own condition type from the list. In case a condition type does not match the requirement then we can copy the condition type and modify according to the requirement.
values are maintained for eveey condition type. i.e. condition records are maintained for condition types inside the condition table.
Pricing Procedure
simple pricing procedue
Reward points if useful. -
Creative Cloud Teams additional seat pricing
Hi,
I recently converted from CC individual to CC for teams membership with discounted prices for the next two years.
Have looked through the support pages and forums without finding answer to my question:
Will the price per additional seat remain the same throughout the two-year period, or will it go up when the offer ends?
Thanks!
Best regards,
MorganHi morgahn,
Welcome to Adobe Forum,
The price of additional seat will remain locked for two years from the date of purchase of the Creative Cloud Team, after the offer period ends, the price of additional seat will be as of the then prevalent price.
Regards,
Rajshree -
SAP CIN - Which Pricing Proc and which Tax Proc ?
Hi,
Can anyone help me understand the difference between Formula based Pricing procedures (JDEPOT, JEXPOR, JFACT) and condition based (JINDEP, JINFAC, JINEXP) ?
And Same for TAX - Whats the difference between TAXINN and TAXINJ ?
How should we decide which one to use and when ?
Thanks !
CIN, Tax procedure, Pricing Procedure, SD, MM, FIHii Ron Borry,
1.TAXINJ-Is Formula based pricing procedure-The tax amount will be calculated based on Tax amount maintained in J1ID(Chapter ID) were as,
If you are using TAXINJ then rates are to be entered while creating tax code in FTXP & J1ID.
In TAXINJ procedure is formula based, where you can find Routine ( selection with logic in line of condition type) are play vital role in tax calculation .
2.TAXINN-Is condition based pricing procedure-the tax amount will be calculated based on condition records maintained in FV11(With what ever predified key combinations)
If you are using TAXINN then system will pick rate from condition record maintained using tcode FV11.
In TAXINN procedure, you can create tax code in FTXP & maintain tax rate for condition types basic excise duty,edu cess , H. Edu cess,VAT/CST in FV11 t.code .Otherwise you can maintain tax rate with respective condition types in FTXP during creation of tax code. But you should maintain condition record in FV11 t.code for condition types JMX1 & JMX2 are as 100%.
Connection with SD
================
The standard procedure with all excise conditions and Sales conditions is pre delivered. All tax calculations happen within TAXINJ. From the pricing procedure the net price gets transferred to the BASB condition of tax procedure. A/R Excise duty conditions are statistical in TAXINJ. These get copied to the SD pricing procedure and get posted from there. From release 46C it is mandatory that all tax conditions of the tax procedure be available in SD pricing also. The posting for the A/P excise duty as well as Sales taxes in both input and output happens from the FI tax procedure.
Benefit - we should follow TAXINJ because it is condition based and it works as the normal pricing procedure works in SD. But this process is too much tough to implement.
Thanks and Regrds,
Santanu -
Diff betwn Manual field in Pricing Proc(V/08) and in Condition type Screen
Hi,
Can anyone please help me in knowing what is the difference between "Manual" field maintained in Pricing Procedure(V/08) and "Manual" field maintained in V/06.
Thanks in advance.
Regards,
Rianka.Hi,
Let me explain with some cases.
Case 1: I need a pricing condition type to get the value from condition records and at the same time user can be able to modify it
Keep manual indicator in V/06. There is no need to keep manual indicator at V/08.
Case 2: I'm having a manual header condition type for which user will enter the value at document
Keep it as manual in both the places.
Case 3: I'm getting a value from EDI such as customer expected price which should not be edited inside the conditions.
Keep it as manual in V/08 and restrict manual entry through V/06.
You dont need to keep access sequence for condition types which are marked as manual in V/08. It should get value either using routines in Altcalc type or manual entry inside the document by user. And all the header conditions are set as manual in V/08. Hope now it clarifies.
Regards,
P Gomatheeswaran. -
Hi SD guru's
Is it possible to have different pricing procedure for sales order and invoice? if yes then how??
Regards
RohanHi
It is possible to maintain different pricing procedures in sales order and billing document.
1. Assign a different "document pricing procedure" in "billing document configuration" than sales document (order) "document pricing procedure".
e.g. Order pricing procedure = A, Billing pricing procedure = B
2. In pricing procedure determination make sure that a different pricing procedure is assigned to (Sales area, Document pricing procedure, Customer pricing procedure combination
Hope this helps.
Regards
AD -
Different Pricing Proc in order & in Billing.
In which scenario order & billing has different pricing procedure?
Help meHI Sunil,
for eg: Order has create in April, where as billing date will be after 3 months i.e. in July.
within this mean period taxes might be change.Freight costs might be increase.
based on this change condition records will be updated.while creating billing
the sales order pricing conditions will be copied,but the new tax rates and freight charges should be copied in billing.for this reason we need to have the new pricing procedure.
even without new PP also we can re determine pricing elements from pricing type by choosing update button in billing doc conditions view.
*Hope it helps, reward points
Maybe you are looking for
-
How to delete emails on iPhone
My iPhone 4s (with upgraded OS) takes awhile to load up over a thousand emails where I tap that icon. Is there a way to delete them all at once? The "Delete" tab on the bottom always seems to be grayed out. Thanks.
-
I ve buyed a E72, but read so many problems here. ...
I´m afraid to repent and these can be solved with a new firmware? Cause I´m think this phone it´s so great and love Nokia phone (a only sad with a low fps in video mode) I want to use email, with bluetooth headset, use fring app... So i want to know
-
Regarding delivery address in pr item details
Hi, My Client has 11 plants in India out of those 2 plants purchase is done by other plants.eg Mumbai plant purchase material for pune plant, now when i make pr i insert plant of Mumbai in item overview. but the delivery of the material should happen
-
Those frustrated by the hassles of posting from iOS will be pleased by a recent change. I don't know where the change was, but the third-party iOS browsers I'm using (Atomic and iCab Mobile) no longer put double capitals at the beginning of a paragr
-
C Programming: How can we get the filesystem name for a given file-path?
C Programming: How can we get the filesystem name for a given file-path? Say I have a filepath=/mnt1/file1 Using some OS API like stat, can I get the Filesystem /mnt ? Thanks in advance, -V