EEM mail with email server using SMTP callback feature

I am having troubles utilizing the email function. Our email server has the SMTP callback feature enabled so the applet fails. Is there a way to respond to this callback using EEM?
My config
ip host mail.domain.com 172.16.164.140 172.16.164.139
event manager environment _mail_smtp mail.domain.com
event manager environment _mail_domain domain.com
event manager environment _mail_rcpt [email protected]
event manager environment _mail_from [email protected]
The Applet
event manager applet TEST
event syslog pattern "%BGP-5-ADJCHANGE: neighbor 10.2.0.1 Down BGP Notification sent"
action 1.0 info type routername action
2.0 mail server "$_mail_smtp" to "$_mail_rcpt" from "$_mail_from" subject "$_event_pub_time: T2 down" body "$_syslog_msg" action
3.0 syslog priority notifications msg "T2 down email send"
Debug and log from the test
May 21 13:33:22.275 CDT: %BGP-5-ADJCHANGE: neighbor 10.2.0.1 Down BGP Notification sent May 21 13:33:22.275 CDT: %BGP-3-NOTIFICATION: sent to neighbor 10.2.0.1 4/0 (hold time expired) 0 bytes
May 21 13:33:22.287 CDT: %BGP_SESSION-5-ADJCHANGE: neighbor 10.2.0.1 IPv4 Unicast topology base removed from session BGP Notification sent
May 21 13:33:22.299 CDT: %HA_EM-5-LOG: MONITOR_TUNNEL_2: BGP Neighbor has gone down on tunnel 2. Setting track 2 to a down state!!! May 21 13:33:22.307 CDT: %HA_EM-6-LOG: TEST : DEBUG(smtp_lib) : smtp_connect_attempt: 1
May 21 13:33:52.307 CDT: %HA_EM-6-LOG: TEST : DEBUG(smtp_lib) : smtp_connect connect fail 260
May 21 13:33:52.307 CDT: %HA_EM-6-LOG: TEST : DEBUG(smtp_lib) : fh_smtp_connect callback timer is awake
May 21 13:33:52.307 CDT: %HA_EM-3-FMPD_SMTP: Error occurred when sending mail to SMTP server: mail.edwardjones.com : timeout error

I should explain a bit more about our setup.
We are utilizing a DMVPN between our remote cisco 2800 router. This SMTP traffic is riding the tunnel encapsulated within the GRE and Crypto. We also utilize a zone based firewall and IPS on the router. To get to the port 25 of our sever this traffic would have to ride the public internet and not be protected via the VPN. I am not prepared to follow that method based on security concerns. So currently we do not allow telnet over the public network and I am confident our main network firewall would block telnet access from outside of our private network.
So basically I am trying to do this over a private/protected infrastructure. Perhaps I am using the wrong method?

Similar Messages

How to set up SAPconnect with email server

Hi,
Does any one know <b>how to set up SAPconnect with email server</b>
We are using workflow and when it fails it we are sending the notification mail to the user on his company mail id, i.e. [email protected]
This is working in the current production system. We are doing the new development which will replace the current production system. The existing Basis team does not know how it was setup in production system and how to set it up in the new system.
When we send any mail notification from workflow we can see the mail in SCOT transaction but it is not received at the specified mail address.
Can any one provide the configuration steps or any document for this.
Thanks in advance..
Pratik

Hi Pratik,
Check the following link:-
/people/thomas.jung3/blog/2004/09/08/sending-e-mail-from-abap--version-610-and-higher--bcs-interface
http://help.sap.com/saphelp_nw04/helpdata/en/2b/d925bf4b8a11d1894c0000e8323c4f/frameset.htm
these link will help u to config SMTP.
And one more thing u have to do..
Go to SE11 n open Table sxnodes in change mode.
And change F_ESMTP field to false i.e. BLANK for the Field NODE = SMTP.
Hope this will work For U.
Regards
Sachin Dhingra

How to send mail in HTML format using SMTP

I want to send mail in HTML format using SMTP.Can anybody please suggest how to do it.Can anybody send me the code.
Thnx.

If you don't know how to send a message using JavaMail see here : http://developer.java.sun.com/developer/onlineTraining/JavaMail/contents.html#JavaMailSending
To send a html format mail you need to set the content type like this (msg is a javax.mail.internet.MimeMessage) :
String subject = "An Email 4 U";
String message = "<HTML><BODY>Here is a link<br><a href='http://javasoft.com'>Java</a></BODY></HTML>";
msg.setSubject(subject);
msg.setContent(message, "text/html");p.s This isn't really an advanced topic

Re: How do I leave my email on the email server using iPad 2 .

Re: How do I leave my email on the email server using iPad 2 .
The iPad 2 wipes the messages off the server when downloading...
This option is not in advance settings for other email providers.

You have to actually have another email account with a email provider. Whether that is your ISP or one of the free/paid email providers like Gmail, Yahoo, MS Outlook.

Can I mail with attachment by using NSURL maito?

Can I mail with attachment by using NSURL maito?

RainApple wrote:
It seems there are open source project to implement it.
Custom API...
Google for skpsmtpmessage

Email Notification using SMTP from FIM to O365

how to perform that activity.

how to perform that activity.
Should be possible by configuration as described here:
How to Allow a Multi-function Device or Application to Send E-mail through Office 365 Using SMTP
I haven't tested it yet. I know that Approval process won't work.
If you found my post helpful, please give it a Helpful vote. If it answered your question, remember to mark it as an Answer.

When Deploying SSIS Packages to SQL Server using SSMS Import feature, is the package configuration file deployed at the same time?

Hello, everyone,
I have an SSIS package with a XML package configuration file. I deployed it to the sql server using the import feature in SSMS (in Stored Packages, right click MSDB, select Import, select the package to deploy in file system). My question is
Is the XML package configuration file also deployed? If so, which folder is it stored so that I can change the values in it? If not, is setting up the Configuration tab when scheduling a agent job the way to go manually bring the configuration file in?
Your help and information is much appreciated.
Regards

Thank you Arthur for your reply. I appreciate it.
A followup questions:
I used direct setting for the configuration file path on C:\. But it needs to be on D:\ on the remote server. I can't create the D:\ path because I don't have D:\ drive on my computer (I understand I could use indirect setting to change the path in the remote
server. But that's not the concern here).
My question is: since the configuration is not deployed, can I make it up by setting up the Configurations in creating the agent job step? That is, copy the configuration file to the D:\ drive on the remote server, in Configurations tab, add the configuration
file on D:\ to the configuration. Will it work? Will the package still look for the original config file on C:\? and if it doesn't find it there, will it cause any error?
Thank you in advance for your help.
Regards

Sending an email with text Content using SMTP Adapter.

I am trying to send an email Message with the .txt attachment using SMTP adapter. I am getting an XML input and I am mapping the input Schema to Flat File Schema. I am trying to Send this Flat File(.txt attachment) in the Email. But I am receiving it as
HTML format only.
The Expression in the Message Transform is,
     SMTPUtils.Part.SetContentType(OutgoingFlatFile_Msg.BodyFlatFile,"text");
     OutgoingFlatFile_Msg(SMTP.EmailBodyTextCharset)="UTF-8";
     DynamicEmailPort(Microsoft.XLANGs.BaseTypes.Address) = "mailto:[email protected]";
     OutgoingFlatFile_Msg(SMTP.CC) = "[email protected]";
     OutgoingFlatFile_Msg(SMTP.Subject) = "TESTMAIL";
     OutgoingFlatFile_Msg(SMTP.From) = "[email protected]";
     OutgoingFlatFile_Msg(SMTP.SMTPHost) = "smtp.org";
     OutgoingFlatFile_Msg(SMTP.SMTPAuthenticate) = 0;
The Email attachment is HTML format,
<?xml version="1.0" encoding="utf-8"?><ns0:Root xmlns:ns0="http://SampleSMTPEmail.OutgoingFlatFile"><Record><CustomerID>Cus001</CustomerID><OrderID>Ord001</OrderID></Record></ns0:Root>
How to attach the .txt file to the email.

Have you tried the following steps:
Create the message (“msgEnvelope”) as a Multi-Part message, with the required message in the Message Body Part (“Attachment”)
Set the following properties of the Envelope Message:
msgEnvelope(SMTP.Subject) = <Email Subject>;
msgEnvelope(SMTP.From) = <Sender Email>;
msgEnvelope(SMTP.SMTPHost) = <Email Host name>";
// This is the default value
msgEnvelope(SMTP.SMTPAuthenticate) = 0;
// Set the message text included in the email
msgEnvelope(SMTP.EmailBodyText) = <Text in body of email>;
// Important - This is required if the EmailBodyText is set
msgEnvelope(SMTP.EmailBodyTextCharset) = "utf-8";
// A value of '1' means include Message Body Part as email attachment
msgEnvelope(SMTP.MessagePartsAttachments) = 1;
Set the following properties of the Message Body Part (“Attachment”):
// Important - Change this MIME type if not sending a Text file
msgEnvelope.Attachment(Microsoft.XLANGs.BaseTypes.ContentType) = "text/plain";
// Set the Filename of the attachment
msgEnvelope.Attachment(MIME.FileName) = <Physical name of the attachment>;
Set the following property on the Dynamic Send Port:
// We set the Email Address on the Port itself
Dynamic_Send_Port(Microsoft.XLANGs.BaseTypes.Address) = <recipient email address>;
http://biztalktalk.wordpress.com/2008/08/28/sending-attachments-through-a-dynamic-send-port/
If this answers your question please mark it accordingly. If this post is helpful, please vote as helpful by clicking the upward arrow mark next to my reply.

Help with email alert using email_alertcdf from download

We are attempting to get the email alert function working. We have downloaded the files into their proper locations, ensured the JRE is installed, registered the function, updated the .udf and are attempting to execute a script.The script errors out with an "Unexpected End of File reached" error.Any help is greatly appreciated!

Endperform wrote:Are you looking to keep your email on the server at all times? If so, I suggest looking into setting up IMAP on your home server which will do what you need.
Endperform: yes that is the plan. Do still keep getmail to fetch the pop3 email from my ISP and the setup IMAP so 'forward' onto the Arch client?
Thanks for the reply.
pyther wrote:I'd have to second what endperform said, if you want to keep you mail on your server at all times, just check out IMAP. Also you can organize your mail in folders with imap
pyther: Thanks for confirming what I've googled.
JTD

Trying to email an image from Lightroom 5.7 and I get the error validation failed to establish connection with email server

ffailed to establish connection with the outgoing email server. Yet my email works fine with sending and receiving anything else.

Your settings will usually be blocked by Google unless you agree to lower your security settings.
Enter your details as shown in image 1 below and click the validate button.
You should see a LR message that the server settings could not be authenticated.
Launch your web browser and go to your Gmail inbox. Look for a message from Google confirming the authorization attempt was blocked.
Click on the link (highlighted in red) on image 2 below.
You will need to Click on the link “Allow less secure apps”
Choose enable
Click done
Now go back to LR and click the validate button and your Gmail account should show as validated.
You can now select a thumbnail from the LR Library and mail it by pressing the keys Control + Shift + M (Cmd+Shift+M on Mac)
The alternative is to set up Google two step verification and make the security application specific to Lightroom.

Mail with exchange server problem.

I keep getting a connection failed message asking me to chdeck the settings for my exchange account. I've done this many times and even managed to talk our administrator into checking the settings.
The error message contains the information that the host xxxx server on port 143 failed. This port may be incorrect, but how do I chage it?
I have managed to sync with my exchange account and all messages seem present, just can't send or recieve from mail, via exchange server.
suggestions?????/

I think the problem of intermittent connections to the mail server is that it may be caused by OSX's firewall, so what I did was to go to System preferences>sharing>Firewall, I opted for a New port, I selected "other" and named it Mail and under the TCP port number I input 25 or you may input whatever you use (ssl requires a different number) or you may do several to cover all the accounts and name them mail2, mail3 etc. if you are wondering what UDP is, its the following: is a connectionless protocol that, like TCP, runs on top of IP networks. Unlike TCP/IP, UDP/IP provides very few error recovery services, offering instead a direct way to send and receive datagrams over an IP network. It's used primarily for broadcasting messages over a network, in other words if you are not sure avoid inputing a number here. So far Im trying it out for stability, I have read many articles and the solution may be as simple as this, its easy to try and non permanent, any one trying this solution please post any experiences. Thanks

Connection with SQL Server using DBCO

Hi,
I want to connect to Misrosoft SQL Server using DBCO transaction. I have given the following fields.
DB Connection = test
DBMS = MSS
User Name = user02
password = test
Conn. info = MSSQL_SERVER=tcp:10.100.50.36 MSSQL_DBNAME=New_Wisdom
permanent selected
Connection Limit = 5
Optimum Conns = 2
while executing through the statement as follows,
EXEC SQL.
CONNECT :'TEST'
ENDEXEC.
I am getting the dump ' An SQL error occurred when executing Native SQL.
The error 900 occurred in the current database connection "DEFAULT".' Please suggest me what needs to be added or corrected.

Hi Benito.
I'm not very familiar with MSS but maybe the following will help a little bit.
Depending on the version of your SAP system you can use the transaction DBACOCKPIT to add connections to non-SAP databases. There is an test connection button in that transaction, too. You will find some information about that transaction in some whitepapers here in the SDN. For example have a look at this one: https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/1062428c-f1df-2910-b08f-c322feddcd10
ADBC error 16 is just "something went wrong". Is your SAP system using MSS, too? If not you will need the matching DBSL for it on your SAP system.
If you have set up an connection you can use program ADBC_TEST_CONNECTION to check if everything is ok. If I remember it correctly in case of errors it allows you to jump into the trace file. There you should find some usefull information.
Perhaps asking in the Database&OS forum area (there is a MSS forum) might help, too.
Best regards,
Jan

Configuring Email Server, using imconfig - getting ora-01017

Hi
I've installed RDBMS 8.1.7 and Email Server 5.2.
When I run imconfig and get to the sceen that prompts for my tns connectsting, sy and system password, I get an "ora-01017 Invalid username/password error".
I've tested the password and all work fine.
I've gone as far as enabling all tracing on the database (sql_trace=true), but I don't see any trace files being created by an attempt to connect ot the database.
Any Ideas?
Werner Adams

Swapnil M Kapote wrote:
Hi Srini,
OS - Windows7
EBS - R12.1.3
Database - 11g
Win 7 is not a certified platform for installing EBS.
>
Following are the contents of concurrent log.
Oracle error
ORA-01017: invalid username/password; logon denied
in "..."
on line 0 of .
/home/SSMY1/apps/apps_st/appl/fxitss/ssont/12.0.0/bin/SS_ALC_FILE_DAEMON
Program exited with status 1
Executing request completion options...
Output file size:
0
Output is not being printed because:
The print option has been disabled for this report.
Following are the details of host script :-
/* Result Sets Interface */
#ifndef SQL_CRSR
# define SQL_CRSR
struct sql_cursor
unsigned int curocn;
void *ptr1;
void *ptr2;
unsigned int magic;
typedef struct sql_cursor sql_cursor;
typedef struct sql_cursor SQL_CURSOR;
#endif /* SQL_CRSR */
........................<snip>...............................
/* [002] Start */
int IsDir( char *dirLoc )
     struct stat sbuf;
     if(     stat(     dirLoc,     &sbuf     ) == -1     )
          return(0);
     if(     S_ISDIR( sbuf.st_mode )     )
          return(1);
     else
          return(0);
/* [002] End */
This is not a host program - a host program is a OS shell script. This looks like C code - you will need to correct the registration of this concurrent program to indicate that it is so.
I am not getting this issue in my previous test instance. But when i run the same file i get the above error. Please tell me possible causes of this.
Pl identify how this was registered in your test instance.
Thanks
Swapnil.
Edited by: Swapnil M Kapote on Jul 23, 2012 11:35 AMHTH
Srini

Not able to connect with managed server using ssl connection

Hi Guys,
My weblogic server is running on linux. I have setup ssl connction bu using Demo Identity and Demo Trust.In server logs i can find the following infomation that server is running on secure port.
But once i try connect to managed server using client i m facing below error:
<May 27, 2013 2:55:00 PM IST> <Info> <Security> <BEA-090905> <Disabling CryptoJ JCE Provider self-integrity check for better startup performance. To enable this check, specify -Dweblogic.security.allowCryptoJDefaultJCEVerification=true>
<May 27, 2013 2:55:00 PM IST> <Info> <Security> <BEA-090906> <Changing the default Random Number Generator in RSA CryptoJ from ECDRBG to FIPS186PRNG. To disable this change, specify -Dweblogic.security.allowCryptoJDefaultPRNG=true>
<May 27, 2013 2:55:00 PM IST> <Info> <Security> <BEA-090908> <Using default WebLogic SSL Hostname Verifier implementation.>
javax.naming.CommunicationException [Root exception is java.net.ConnectException: t3s://host:port: Destination unreachable; nested exception is:
     javax.net.ssl.SSLHandshakeException: General SSLEngine problem; No available router to destination]
     at weblogic.jndi.internal.ExceptionTranslator.toNamingException(ExceptionTranslator.java:40)
     at weblogic.jndi.WLInitialContextFactoryDelegate.toNamingException(WLInitialContextFactoryDelegate.java:767)
     at weblogic.jndi.WLInitialContextFactoryDelegate.getInitialContext(WLInitialContextFactoryDelegate.java:366)
     at weblogic.jndi.Environment.getContext(Environment.java:315)
     at weblogic.jndi.Environment.getContext(Environment.java:285)
     at weblogic.jndi.WLInitialContextFactory.getInitialContext(WLInitialContextFactory.java:117)
     at javax.naming.spi.NamingManager.getInitialContext(NamingManager.java:684)
     at javax.naming.InitialContext.getDefaultInitCtx(InitialContext.java:307)
     at javax.naming.InitialContext.init(InitialContext.java:242)
     at javax.naming.InitialContext.<init>(InitialContext.java:216)
     at com.akt.client.WLCLIENT.makeConnection(WLCLIENT.java:40)
     at com.akt.client.WLCLIENT.main(WLCLIENT.java:60)
Caused by: java.net.ConnectException: t3s://host:port: Destination unreachable; nested exception is:
     javax.net.ssl.SSLHandshakeException: General SSLEngine problem; No available router to destination
     at weblogic.rjvm.RJVMFinder.findOrCreateInternal(RJVMFinder.java:216)
     at weblogic.rjvm.RJVMFinder.findOrCreate(RJVMFinder.java:170)
     at weblogic.rjvm.ServerURL.findOrCreateRJVM(ServerURL.java:165)
     at weblogic.jndi.WLInitialContextFactoryDelegate$1.run(WLInitialContextFactoryDelegate.java:345)
     at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:363)
     at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:146)
     at weblogic.jndi.WLInitialContextFactoryDelegate.getInitialContext(WLInitialContextFactoryDelegate.java:340)
     ... 9 more
Caused by: java.rmi.ConnectException: Destination unreachable; nested exception is:
     javax.net.ssl.SSLHandshakeException: General SSLEngine problem; No available router to destination
     at weblogic.rjvm.ConnectionManager.bootstrap(ConnectionManager.java:470)
     at weblogic.rjvm.ConnectionManager.bootstrap(ConnectionManager.java:321)
     at weblogic.rjvm.RJVMManager.findOrCreateRemoteInternal(RJVMManager.java:260)
     at weblogic.rjvm.RJVMManager.findOrCreate(RJVMManager.java:197)
     at weblogic.rjvm.RJVMFinder.findOrCreateRemoteServer(RJVMFinder.java:238)
     at weblogic.rjvm.RJVMFinder.findOrCreateInternal(RJVMFinder.java:200)
     ... 15 more
But in server logs i can see below message
opt/Oracle/Middleware/wlserver_12.1/server/lib/DemoIdentity.jks.>
<May 27, 2013 2:47:06 PM IST> <Notice> <Security> <BEA-090169> <Loading trusted certificates from the jks keystore file /opt/Oracle/Middleware/wlserver_12.1/server/lib/DemoTrust.jks.>
<May 27, 2013 2:47:06 PM IST> <Notice> <Security> <BEA-090169> <Loading trusted certificates from the jks keystore file /opt/jdk1.7.0_21/jre/lib/security/cacerts.>
<May 27, 2013 2:47:06 PM IST> <Notice> <Server> <BEA-002613> <Channel "DefaultSecure" is now listening on hostname:port for protocols iiops, t3s, ldaps, https.>
<May 27, 2013 2:47:06 PM IST> <Notice> <WebLogicServer> <BEA-000332> <Started the WebLogic Server Managed Server "Server-Test" for domain "base_domain" running in development mode.>
Please suggest
Edited by: 1008140 on May 27, 2013 2:37 AM

Welcome to OTN
This section related to Database question not fusion middle ware Post your question
Oracle Discussion Forums » Fusion Middleware

ICAL Email notification, stuck on communication with email server

Hi,
I know there is a ton of of these iCAL issues...
I was able to get by some initial issues and now am stuck at the email notifications not able to send.
Sending updates to an external address starts this chain of attempts to contact the mail server to send out the update. It repeats the following two segments repeatedly.
My cal error log shows:
2010-09-19 16:54:12-0700 [-] [caldav_task] 2010-09-19 16:54:12-0700 [-] [calendarserver.sidecar.task#debug] Checking for tasks
2010-09-19 16:54:12-0700 [-] [mailgateway] 2010-09-19 16:54:12-0700 [IMAP4DownloadProtocol,client] [twistedcaldav.mail.IMAP4DownloadFactory#debug] IMAP factory connection lost
2010-09-19 16:54:12-0700 [-] [mailgateway] 2010-09-19 16:54:12-0700 [IMAP4DownloadProtocol,client] [twistedcaldav.mail.IMAP4DownloadFactory#debug] Scheduling next IMAP4 poll
My mail access log shows:
Sep 19 16:48:52 beta dovecot[3149]: pop3-login: Disconnected (no auth attempts): rip=<iCAL Server IP>, lip=<Mail Server IP>
Sep 19 16:48:52 beta dovecot[3149]: auth(default): new auth connection: pid=20637
Sep 19 16:53:42 beta dovecot[3149]: imap-login: Disconnected (no auth attempts): rip=<iCAL Server IP>, lip=<Mail Server IP>
Sep 19 16:53:42 beta dovecot[3149]: auth(default): new auth connection: pid=20639
The attempts to send notifications do not reach the SMTP.
My settings are correct in the notification settings (I created in OD and confirmed POP/IMAP/SMTP settings with mail clients), both POP/or IMAP (either don't work at this point) and SMTP are using SSL.
The keychains com.apple.servermgr_calendar and .invitations both list the same system account with the password populated. The only difference is that .invitations carries the FQDN after the username ([email protected])
I had seen with the default com.apple.calendarserver, it did more or less the same thing...
From what I could research, the "(no auth attempts)" seems to suggest the gateway or mail server is not accepting the method or has all methods of authentication closed... However this shouldn't be the case, both mail server and ical have SSL use set in their respective settings...
*(I understand that caldavd.plist has the option to hold a plain text password... however this is not currently in my caldavd.plist and I do not wish to use it. My mail server is set to only work with MD5 however... Issue perhaps?
Any advice so I can catch up to where everyone else is stuck at would be pretty cool!

I attempted to use com.apple.calendarserver again, but it does not authenticate at all on the mail server.
Both my created and the com.apple. seem to be stuck in only being able to authenticate in PLAIN. I have given in on this and enabled the PLAIN authentication. From here the server log said com.apple.calendarserver had the wrong authentication. I don't see how this can be the case... (the mail server is a OD replica itself)
So I went into WGM and merely re-pasted in what I had recorded onto the local account. The WGM goes on and on about how this com.apple.calendarserver is only a local account, but I don't see any way to make an OD account (I'm not sure if this is even critical) anyway so I'll leave it be.
So now both email and normal across-OD invitations function.
On invitation replies however I get this message in the mail access log:
deliver(com.apple.calendarserver): Sep 26 02:54:12 Info: msgid=<[email protected]l.outsi dedomain.com>: saved mail to INBOX
Sep 26 02:54:12 beta push_notify[2709]: error: <iq id='10003' to='[email protected]/push_notify' type='error' from='pubsub.beta.mydomain.com' xmlns='jabber:client'><pubsub xmlns='http://jabber.org/protocol/pubsub'><publish node='/Public/IMAP/beta.mydomain.com/portnum/Mailbox/C8BA4F7E-6E65-4C97-8BCC-BC 3D28FAFE4B'><item><plistfrag xmlns='plist-apple'/></item></publish></pubsub><error type='cancel' code='404'><remote-server-not-found xmlns='urn:ietf:params:xml:ns:xmpp-stanzas'/></error></iq>
Otherwise it seems the SMTP sees the invitation reply and regurgitates back to the com.apple.calendarserver mail... What happens to it from there is a mystery.

EEM mail with email server using SMTP callback feature

Similar Messages

Maybe you are looking for