Effect of upgrade in workflow objects

Hi Experts,
We are upgrading the system from SAP version 4.7 to ECC 6. We have some workflow objects ( custom workflow and standard workflow with custom changes). Can you please tell me what are the errors can occur in workflow for upgradetion process. How to rectify them and how to correct those.
Thanks in advance,
Regards,
Abhishek

Hi Steve,
I am new bee in JMs over MQ series.
Pls. let me know how to configure JMS provider over MQ series 5.2
MQ 5.2 does not provide any JMS jars so how can I write a client for JMS.
Regards,
Lee.

Similar Messages

  • Other Objects( Workflow Objects) in SPAU

    Dear All
    We are going for Upgrade from 4.7 to ECC 6.0 . In that under Without Modification Assistant Node , there are OTHER OBJECTS Category. In that , all are in red traffic light and those are Workflow Objects like following.
    PDTS 00007842
    PDTS 01200231
    PDTS 01200246
    PDTS 01400009
    PDTS 12300096
    PDTS 12300110
    PDTS 12500044
    PDTS 20000085
    PDTS 20000159
    PDTS 20000193
    PDTS 20000460
    PDTS 20000889
    PDTS 20000906
    PDWS 00400012
    PDWS 01200147
    How to deal those above Objects???? Gimme a solution please
    Kind Regards
    Karthikeyan.

    Hello Karthikeyan,
    is this still a problem?
    Other objects are not supported by transaction SPAU, there is no navigation to the maintenance tool specially possible.
    There is only a sign: you have changed an object which is not supported by the modification assistant and this object is now
    delivered from SAP again.
    You should use the maintenance tool for this object and your manual notes, which you make during the change of this object. For example, the workflow objects are the following:
    PDWA Workflow Pattern with All Versions
    PDWS Workflow templates
    SCNT Workflow Container PPF (Definition + Data)
    SIFL Workflow Documents: Logical Information Object
    SIFP Workflow Documents: Physical Information Object
    SWFC Workflow Correlation Definition
    SWFT Workflow: process type
    SWFX Workflow XML Proxy
    They can be processed in SE95_UTIL like Julia informed.
    Other examples of OTHER OBJECTS found in SPAU:
    SmartForms:  Object SSFO -> Transaction SMARTFORMS.
    Queries:        Object AQQU -> Transaction SQ01
    In SPAU you can double click at the traffic light and on the next popup you can choose 'Adjust' or 'Reset'.
    I hope this helps in some way
    Best regards,
    Tomas Black

  • How can I create an iridescent effect in a Photoshop 3D object?

    How can I create an iridescent effect in a Photoshop 3D object? I have searched everywhere for downloadable option for a mac with no luck. I'm working with CS6.

    NO way. Such stuff isn't even commonly available in many 3D programs becaus it's actually pretty advanced shader stuff...
    Mylenium

  • How to know the workflow object name assigned to a Transaction code

    Hi Friends,
    There is one workflow object assigned to one transaction code VKM1. How can i know the workflow object name assigned to that particular transaction. Can anybody help me?
    Regards
    shankar

    HI
    Please check t.code PPOMW
    Thanks & Regards
    Phaneendra

  • Side Effects of Upgrading to SP5 from SP4 in XI

    What are the Side Effects of Upgrading to SP5 from SP4 in XI

    Check here:
    http://service.sap.com/~form/sapnet?_SHORTKEY=00200797470000080233&

  • Procedure to Call Workflow Object from ABAP program in Se38

    Hi All,
    I have one scenario like i have to call one Workflow object from ABAP program in SE38.The scenario is like below.....
    I have to select some records from database table.For example there are 100 records in the internal table.
    For all that records i have to invoke Workflow for getting approval from the authorized persons. Once Approval has come to program, It will post one document in SAP and process ends.
    Please suggest me how to move forward with this scenario.
    Regards
    Manas Ranjan Panda

    Hi,
    So you want to start a workflow from an ABAP, if an event exists for that particular workflow then the best way is to use fm SAP_WAPI_CREATE_EVENT,
    to start a workflow from an ABAP you can use fm SAP_WAPI_START_WORKFLOW.
    Kind regards, Rob Dielemans

  • Workflow objects in partner profile

    Hi,
    I am configuring partner profile for EDI. Is it mandatory to configure workflow objects in partner profile? Can I opt not to have error notification to any person or organazation?
    In the Post Processing:permitted agent tab, the system is asking for workflow object details.
    Thank you.

    Hi..
    u have to assign the w/f object ,,....like BOR Object ...
    Thanks,
    Manjunath MS

  • To request my serial number for Adobe After Effects to upgrade to 64bit system

    I have AE cs6 and I need to upgrade to 64bit system.
    How and where to request my serial number for Adobe After Effects to upgrade to a compatible 64-bit operating system? (because no customer service answered me)

    I don't understand your problem.
    After Effects CS6 runs on 64 bit systems.  You use the same serial number you use on a 32 bit system.
    If you want to upgrade to the CC subscription version, you can do so on the Adobe website.
    What do you mean that no customer service answered you?  Did you speak to Adobe Support?  What did they say?

  • Adobe After Effects CS3 upgrade doesn't show as product purchased on "My Products and Services" page

    Hi,
    I have purchased both Adobe Photoshop 6.00, a upgrade from it to Photoshop CS2, Adobe After Effects 8, and a upgrade from it to After Effects C3.  The Adobe Photoshop 6.00 shows up with its corresponding serial numberand the Photoshop CS2 upgrade shows up separtely with its serial number.  After Effects shows up as version 8 but has the serial number from the CS3 product and there is only one entry for it. 
    Did I lose my After Effects CS3 upgrade when I used it to get the discount for the Creative Cloud and that is why it is showing up as version 8?
    Thanks, Ron

    Thank you. 
    I should have looked at my old version's box and I would have relized that. So, there is no loss of ownership or anything of that nature in using Adobe After Effects CS3 for the Adobe Cloud discount?  I would be free to even sell it?
    Thanks, Ron

  • Unicode upgrade of Business Objects

    Hi All,
    Can someone let me know how to do Unicode upgrade of Business objects.
    For programs, we can set the unicode attribute, in the similar way how to set this Unicode attribute for Business objects?
    Amogh

    Hi Amogh.
    We have the same issue.
    Whe are in the middle of the ABAP unicode enabling and we haven't found a solution for some customer Business Objects - e.g. Z_BUS2017. They are OK (UCCHECK transaction) but they haven't the Unicode flag. The standard Object BUS2017, program MM07MMOB have the Unicode flag activeted (view TRDIR-UCCHECK).
    If you have got a solution please, advice us.
    Best regards,
    Carlos

  • Workflow object  FIPP.notworking in another client

    Hi Gurus,
    Right now we are working on workflow object FIPP.It,s working fine in our(sand box) client.when we try to do the same in testing client(which is available in the same system) not working.
    Could you please tell me what are the client specific settings(in terms of customizing and workbench) to be made.
    Note:we have created client specific prefix numbers and and their templates in the system .apart from this what are all the checks to be made as far as this config is concern.
    Kindly help.
    Regards,
    Sathish.

    Satish,
    The Workflow <b><u>runtime</u></b> must be customized in each client that you want to run/test your workflows. You can use the Auto customizing option from txn SWU3. You also need to activate  the event linkage for the workflow and either assign possible agents to your dialog tasks or set the task as general depending on your needs in each client. Don't forget to refresh the org buffers (txn SWU_OBUF) after making these changes.
    Cheers,
    Ramki Maley.

  • System Copy for Workflow objects

    Hi Experts,
      My client need to migrate code in some request from one system(Sandbox) to another system(Development). They r not adivicing me to transporting the request. They want to migrate each individual object. Could anyone suggest me how can I do this migration for workflow objects. Can I have an option of import and exporting the workflow template and taks.
    Regards
    Jose

    Hello Jose,
    The fastest and most painless way is to create them in the new system. There are just too many problems to sort out and the export function is a joke.
    A quick tip: have two sessions open, switch between them and copy/paste your task texts etc.
    Sorry it's not the answer you want, but it's going to save you the most time. It's not as much work as it seems, a couple of hours per workflow at most.
    Cheers,
    Mike

  • In Captivate, how to effectively control the movement of objects on the stage?

    How to, say, make a shape (an arrow, for example) which points to a certain location move (and maybe rotate at the same time) to another location (another point on the stage) one second later. I know I can "apply effect" to it, but still I don't find it very easy to control the start position and end position of the arrow and the way it rotates (for example, how to make it rotate along the X, Y and Z axis respectively?)
    Or, how can I make an image fly into the stage to a specific location from a certain direction, linger for a specific time, and then fly out in a specified direction? And while setting up this animation, is it possible to scrub across the timeline to see the effect of the animation, as you do in Flash Professional?

    An old pain, efficient control of motion paths and motion effects, I know.
    All motion effects are relative to the start position of the object, that can allow you to realize the fly in and fly out: time both effects and leave the necessary 'linger' time between the effects. The motion paths can be edited. To have more precise coordinates you can either edit the XML that describes the effect, or create a motion effect in Flash Professional and save it as XML to be used in Captivate, or use my approach: I create a crosshair group with a perfect vertical and horizontal line object, that you can position exactly using the X and Y coordinates and then drag start or end point of the motion path over that cross hair. I have been pleading to have at least a snap function or a serious improvement that allows to enter coordinates but apparently not many users are wanting this improvement. I used that approach here in the first movie: Reset Effects in Captivate 6 - Captivate blog
    And no, Preview slide (which is what you do when scrubbing the timeline) is not a real preview, you cannot see those effects.
    Please, next time mention the version you are using. In CP7 and before effect duration was relative to object duration, in CP8 it is (finally) absolute timing.

  • Upgrade of Business Objects v3.0 to v3.1 makes folder security disappear

    Hi All,
    re: Upgrade of Business Objects v3.0 to v3.1 makes folder security disappear
    We just upgraded to v3.1 and the security I put in place in v3.0 did not carry over for the folders. Our company wanted to secure the folders per SAP security role, so I did that by breaking the inheritence relationship from the Root Folder on child folders that they should not have access to (see SAP note#1281763 for explaination on this type of procedure). It worked fine in v3.0, but after the upgrade, all of those changes had disappeared and every SAP role was able to see every folder. This was a major effort to secure those folders and I do not want to do it again. Also, we did import the roles into the upgrade BO v3.1 before we imported the BO structure, which as told to us by SAP, would work and not cause this issue.
    Thanks for your help!

    Hello Gary,
    I recommend to post this query to the [BusinessObjects Enterprise Administration|BI Platform; forum.
    This forum is dedicated to topics related to administration and configuration of BusinessObjects Enterprise, BusinessObjects Edge, and Crystal Reports Server.
    It is monitored by qualified technicians and you will get a faster response there.
    Also, all BOE Administration queries remain in one place and thus can be easily searched in one place.
    Best regards,
    Falk

  • Workflow Import Created Unusable, Undeletable Workflow Object

    Hey everyone,
    We have a massive, 37000-row approval process for one of our applications that we're attempting to move from one environment to another using the workflow import/export function in Workspace/Planning 11.1.2.2.300. The .exp file is 37000 rows and successfully exported from the application, but the import process hung and crashed. Now, when entering the Planning Unit Hierarchy, we see the object that we imported the hierarchy to, but workspace freezes whenever I attempt to open or delete the workflow.
    I'm not sure if there's anything we can do at this point. We haven't tried a planning/workflow restart which we'll do when we have the chance, but were wondering if there is a backend table we could access to delete the workflow object from the application.
    Any help you could offer to delete this workflow/approval process object would be appreciated!

    Reload with FORCE option to overwrite what is there.
    Otherwise, you will have Purge a lot of different tables.  Here are some:
    WF_ITEM_TYPES
    WF_ITEMS
    WF_ITEM_ACTIVITES
    WF_ITEM_ACTIVITY_VALUES
    WF_PROCESSES
    WF_PROCESS_ACTIVITIES
    WF_NOTIFICAITONS
    WF_NOTIFICAITON_ATTRIBUTES
    WF_NOTIFICAITON_ATTRIBUTE_VALUES
    There are more

Maybe you are looking for